Amplificador Phoenix Contact

download Amplificador Phoenix Contact

of 4

description

MACX MCR-EX-SL-NAM-2T

Transcript of Amplificador Phoenix Contact

  • PHOENIX CONTACT AS Page 1 / 4http://www.phoenixcontact.no Dec 4, 2009

    Extract from the onlinecatalog

    MACX MCR-EX-SL-NAM-2TItem No.: 2865463

    http://eshop.phoenixcontact.no/phoenix/treeViewClick.do?UID=2865463

    Ex i NAMUR isolating amplifier For operating proximity sensors andswitches in Ex areas. The signals are transmitted via 2 transistoroutputs (passive) to the safe area. Line fault detection (LFD), 3-wayisolation, SIL 2.

    Commercial data

    EAN 4046356160483

    Pack 1

    Customs tariff 85437090

    Catalog page information Page 438 (IF-2009)

    Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation at http://www.download.phoenixcontact.com.The General Terms and Conditionsof Use apply to Internet downloads.

    Technical data

    Measuring input

    Non-load voltage 8 V DC 10 %

    Switching points (attenuated) < 1.2 mA (Disabling)

    Switching points (unattenuated) > 2.1 mA (Conducting)

    Measurement output

    Switching output 2 transistor outputs, passive

    Maximum switching voltage 30 V DC (per output)

    Min. contact current 5 mA

    Service life, electrical 109 cycles

  • MACX MCR-EX-SL-NAM-2T Item No.: 2865463http://eshop.phoenixcontact.no/phoenix/treeViewClick.do?UID=2865463

    PHOENIX CONTACT AS Page 2 / 4http://www.phoenixcontact.no Dec 4, 2009

    Power supply

    Nominal supply voltage 24 V DC

    Range of supply voltages 19.2 V DC ... 30 V DC

    Max. current consumption < 28 mA (24 V DC)

    Power consumption 800 mW

    Connection data

    Conductor cross section solid min. 0.2 mm

    Conductor cross section solid max. 2.5 mm

    Conductor cross section stranded min. 0.2 mm

    Conductor cross section stranded max. 2.5 mm

    Conductor cross section AWG/kcmil min. 24

    Conductor cross section AWG/kcmil max 14

    Stripping length 8 mm

    Screw thread M3

    Type of connection Screw connection

    Tightening torque, min 0.5 Nm

    Tightening torque max 0.6 Nm

    General data

    No. of channels 1

    Ambient temperature (operation) -20 C ... 60 C (Any mounting position)

    Ambient temperature (storage/transport) -40 C ... 80 C

    Permissible humidity (operation) 10 % ... 95 % (no condensation)

    Status display Green LED (supply voltage)

    LED yellow (switching state)

    Red LED (line errors)

    Width 12.5 mm

    Height 99 mm

    Depth 114.5 mm

    Inflammability class acc. to UL 94 V0

    Housing material polyamide (PA 6.6)

    Color green

    Conformity CE-compliant, additionally EN 61326

    ATEX II (1) GD [Ex ia] IIC

    IECEX [Ex ia] IIC; [Ex iaD]; Ex nA II T4 X

  • MACX MCR-EX-SL-NAM-2T Item No.: 2865463http://eshop.phoenixcontact.no/phoenix/treeViewClick.do?UID=2865463

    PHOENIX CONTACT AS Page 3 / 4http://www.phoenixcontact.no Dec 4, 2009

    UL, USA / Canada UL applied for

    Functional safety (SIL) SIL 2 according to EN 61508

    Certificates

    Certification Ex: IECEx

    Drawings

    Block diagram

    Dimensioned drawing

  • MACX MCR-EX-SL-NAM-2T Item No.: 2865463http://eshop.phoenixcontact.no/phoenix/treeViewClick.do?UID=2865463

    PHOENIX CONTACT AS Page 4 / 4http://www.phoenixcontact.no Dec 4, 2009

    Address

    PHOENIX CONTACT ASStrmsveien 344N-1001 Oslo,NorwayPhone +47 22 07 68 00Fax +47 22 07 68 10http://www.phoenixcontact.no

    Phoenix Contact ASTechnical modifications reserved;