Amethyst - pattern - PDF

5
- 1 - Amethyst Quilt Designed by Deb Mosa Finished Quilt Approx. 71-3/4“ x 71-3/4” - Finished Center Size: 56-3/4“ x 56-3/4” Amethyst fabrics by Exclusively Quilters - Style #3925 Fabric Requirements: Based on 42“ wide fabric 3/4 yard large floral (#60206-30) 1/2 yard small purple floral (#60600-3) 1 yard small black floral (#60600-8) 7/8 yard paisley (#8752-3) 3/4 yard grey (#60254-80) 1 yard pink (#60254-1) 1-1/3 yards purple (#60254-3) 2 yards black (#60254-8) 4-5/8 yards fabric for backing (#60206-3 suggested) 80” x 80“ quilt batting Cutting Directions: All measurements based on a 1/4” seam allowance. From the large floral: Cut two 8-3/4” x 42” strips, recut into eight 8-3/4” x 10-1/2” pieces From the small purple floral: Cut one 9-1/2“ x 42” strip, recut into two 9-1/2“ squares** From the small black floral: Cut one 5-1/4” x 42” strip, recut into four 5-1/4“ squares Cut six 3” x 42” strips From the paisley: Cut one 10“ x 42” strips, recut into four 10“ squares Cut two 5-1/4” x 42” strips, recut into eight 5-1/4“ x 10” pieces From the grey: Cut two 5-1/4” x 42” strips, recut into eight 5-1/4“ x 10” pieces Cut four 1-7/8” x 42” strips From the pink: Cut four 4-1/2” x 42” strips Cut five 1-7/8” x 42” strips From the purple: Cut one 12-5/8“ x 42” strip, recut into two 12-5/8” squares* Cut four 4-1/2” x 42” strips Cut four 1-7/8” x 42” strips From the black: Cut one 10-3/8“ x 42” strip, recut into four 10-3/8” squares* Cut one 9-1/2“ x 42” strip, recut into four 9-1/2“ squares** Cut one 5-5/8“ x 42” strip, recut into four 5-5/8” squares* Cut eight 2-1/2” x 42” strips Cut two 1-7/8” x 42” strips Cut eight 1-1/2” x 42” strips An added 1/8 to 1/2 yard is added to all yardages to account for shrinkage, straightening, cutting errors and prints that may require special cutting to get the best results. You should protect your investment in time and fabric by making sample blocks before cutting into your fabric because Exclusively Quilters will take no responsibility for replacing fabrics. Shops who wish to kit this design are responsible for figuring yardage for their kits if they wish to reduce yardages. * ** Cut squares as indicated:

Transcript of Amethyst - pattern - PDF

Page 1: Amethyst - pattern - PDF

- 1 -

AmethystQuilt Designed by Deb Mosa

Finished Quilt Approx. 71-3/4“ x 71-3/4” - Finished Center Size: 56-3/4“ x 56-3/4”Amethyst fabrics by Exclusively Quilters - Style #3925

Fabric Requirements: Based on 42“ wide fabric3/4 yard large �oral (#60206-30)1/2 yard small purple �oral (#60600-3)1 yard small black �oral (#60600-8)7/8 yard paisley (#8752-3)3/4 yard grey (#60254-80)1 yard pink (#60254-1)1-1/3 yards purple (#60254-3)2 yards black (#60254-8)4-5/8 yards fabric for backing (#60206-3 suggested)80” x 80“ quilt batting

Cutting Directions: All measurements based on a 1/4” seam allowance.From the large �oral: Cut two 8-3/4” x 42” strips, recut into eight 8-3/4” x 10-1/2” piecesFrom the small purple �oral: Cut one 9-1/2“ x 42” strip, recut into two 9-1/2“ squares**From the small black �oral: Cut one 5-1/4” x 42” strip, recut into four 5-1/4“ squares Cut six 3” x 42” stripsFrom the paisley: Cut one 10“ x 42” strips, recut into four 10“ squares Cut two 5-1/4” x 42” strips, recut into eight 5-1/4“ x 10” piecesFrom the grey: Cut two 5-1/4” x 42” strips, recut into eight 5-1/4“ x 10” pieces Cut four 1-7/8” x 42” stripsFrom the pink: Cut four 4-1/2” x 42” strips Cut �ve 1-7/8” x 42” stripsFrom the purple: Cut one 12-5/8“ x 42” strip, recut into two 12-5/8” squares* Cut four 4-1/2” x 42” strips Cut four 1-7/8” x 42” stripsFrom the black: Cut one 10-3/8“ x 42” strip, recut into four 10-3/8” squares* Cut one 9-1/2“ x 42” strip, recut into four 9-1/2“ squares** Cut one 5-5/8“ x 42” strip, recut into four 5-5/8” squares* Cut eight 2-1/2” x 42” strips Cut two 1-7/8” x 42” strips Cut eight 1-1/2” x 42” strips

An added 1/8 to 1/2 yard is added to all yardages toaccount for shrinkage, straightening, cutting errors andprints that may require special cutting to get the bestresults.You should protect your investment in time and fabricby making sample blocks before cutting into your fabricbecause Exclusively Quilters will take no responsibilityfor replacing fabrics.Shops who wish to kit this design are responsible for�guring yardage for their kits if they wish to reduceyardages.

*

**

Cut squaresas indicated:

Page 2: Amethyst - pattern - PDF

Sewing Directions: 1. From the 1-7/8” x 42” strips, cut the following diamonds with Diamond Template: 20 grey, 56 pink, 52 purple and 16 black.

2. Trim each of the large �oral 8-3/4” x 10-1/2” pieces with the Pentagon Template.

3. Arrange diamonds into three rows of three diamonds as shown. Stitch the diamonds into rows, then sew the rows together, matching seam allowances. Make the indicated number of each diamond unit.

4. Sew one each of the diamonds units with black together as shown. Make 4.

SET IN SEAMS are needed to add pieces that require two separate seams because a straight seam will not work. Basically, a set in seam is made by sewing one side of the piece being added (in this case a triangle) to the piece it’s being added to (diamonds). The fabric is then removed from under the sewing machine, the pieces are folded so the second side of the triangle to the other diamond unit. That second seam is sewn, then the piece is pressed �at.

5. Sew a 9-1/2” small purple quarter-square triangle between the diamond units. Make 4.

6. Sew a large �oralpentagon to thesmall �oral triangleas shown.Make 4.

- 2 -

Amethyst

Make 8

Make 4 Make 4

Page 3: Amethyst - pattern - PDF

7. Stitch two grey/purple/pink diamonds to sides of a large �oral pentagon as shown. Stitch a 9-1/2” small purple �oral triangle underthe pentagon. Make 4.

8. Set in two 9-1/2” black quarter-square triangles as shown.

9. Sew the diamond/pentagon units from Step 6 together as shown.

10. Sew in the units from Step 8 as shown.

11. Set in two 9-1/2” black quarter-square triangles along each side of quilt center. Then add 12-5/8” purple half-square triangles to corners to �nish the star block.

- 3 -

Amethyst

Page 4: Amethyst - pattern - PDF

Assembly:1. Arrange the following pieces in four rows as shown: one 5-1/4” small black �oral square, one 10” paisley square, two 5-1/4“ x 10” grey pieces, two 5-1/4“ x 10” paisley pieces, two 5-5/8“ black half-square triangles and two 10-3/8” black half-square triangles. Sew pieces into rows. Sew rows together. Make four corner units.

2. Sew a corner unit to each side of star block.

3. Stitch six 3” x 42” small black �oral strips together end-to-end. Cut two 58” lengths. Sew to sides of quilt center, press and trim excess. Cut remaining border into two lengths and sew to top and bottom of quilt center, press and trim.

4. Sew four 4-1/2” x 42” pink strips together end-to-end. Repeat with purple 4-1/2” strips. Sew pink strip to left side of quilt, press and trim excess. Repeat with purple strip on right side. Add remaining border strips to top (pink) and bottom (purple) of quilt.

5. Sew eight 1-1/2” black strips together end-to-end. Cut into four equal lengths. Add to sides then top and bottom of quilt, pressing and trimming after each border addition.

Finishing:1. Sew the two lengths of backing together along selvage edges creating a two-panel wide backing. Layer the backing, batting and quilt top. Quilt or tie as desired.

2. Prepare binding from eight 2-1/2" x WOF black strips. Sew strips together into one long binding strip. Press strip in half lengthwise.

3. Carefully trim backing and batting even with quilt top.

4. Leaving an 8" tail of binding, sew binding to top of quilt through all layers matching all raw edges. Miter corners. Stop approximately 12" from where you started. Lay both loose ends of binding �at along quilt edge. Where these two loose ends meet, fold them back on themselves and press to form a crease. Using this crease as your stitching line, sew the two open ends of the binding together right sides together. Trim seam to 1/4" (.64cm) and press open. Finish sewing binding to quilt.

5. Turn binding to back of quilt and blind stitch in place.

- 4 -

Amethyst

Page 5: Amethyst - pattern - PDF

Trace templates ontotemplate plastic. Cut outshapes and label.

- 5 -

Amethyst

This box is 2" square.Measure the box. If it is not 2" square, reduce or enlarge the entire pageof templates until it is.

Pentagon Template

Combine two halves tomake whole templatethat measures 8-3/4”across and 10-1/2” tall.

Fold

Diamond Template