Amersham Sign Design Window & Display Components Br

3

l l e c t i o n C O N T E N T S

Sign systems 12

Graphic displays 40

Product displays 48

Lighting 51

Freestanding displays 60

Light boxes 64

Moving displays 67

Digital displays 69

Sales support material 73

Cable systems 16

Samples & promotional material 73Component measurements 74

Wall mounted supports for signs & graphics 13-15

1.5mm cable & supports 17-233mm cable & supports 24-25

Acrylic pockets & poster holders 41-42Hook-on accessories 43Leaflet dispensers 44Acrylic accessories 45Framed posters and ‘A’ boards 46Banner & hanging rails 47

Shelving 49Acrylic display cubes 50

How to choose your lighting 52Cantilevered lights 53-54Straight lights 55Wirelights 56Hightrack kits 57Highlight 58Lighting accessories 59

Freestyle - single units 61Flexiframe - multiple units & frame accessories 62Info-post 63

Cold cathode and curved light boxes 65XtraLite 66

E-motion 68

Digital display screens & kits 70-72

Rod systems 293mm rod system & supports 30-326mm rod system & supports 33-3610mm rod system & supports 37-39

Installation accessories & tools 26Installation accessories for cables & rods 26Channel installation ideas 27Tools and spares 28

Kits 8The easiest ways to create a perfect display 8-11

4

Wall mounted...

Floor-to-ceiling creativity...

create the perfect display for

Signage suspended from the ceiling...

Versatile cable and rod systemsthat allow you to create exactlythe display you want.

5

Freestanding displays

you...

Add movement...

Add low voltage lighting

and watch your sales increase

6

Floating multi-media presentations...

The very latest digitaldisplays will add soundand movement to yourdisplays...and increasesales too...

Add flexibility to your display with channel...

7

Incredibly slim, bright light boxes create maximum impact...

Ultra-bright, slimlight boxes can besuspended or wallmounted...used on their ownor combined withother displays...

8

KitsPoster holders

Ceiling to floor kits Wall mounted kits

KA1A1 portrait

Item Pocket No. of Format:Code: Size Pockets

KA1 A1 1 PortraitKA2 A2 1 PortraitK2A3 A3 2 PortraitK3A4 A4 3 PortraitKA1L A1 1 LandscapeKA2L A2 1 LandscapeK2A3L A3 2 LandscapeK3A4L A4 3 LandscapeKits with double poster pockets:K7P A4 3x2 PortraitK7PH A3 1 Landscape header

A4 6 Portrait Kits with treble poster pocketsK8P A4 3x3 Portrait

- using 1.5mm cable- display posters from A1 to A4

- using 1.5mm cable- display posters from A1 to A4

Hook on kits

4 easy steps to create your perfect display:1. Decide if you want your display fitted ceiling to floor, wall mounted or freestanding.2. Decide if you want to display posters, leaflets, shelving or a combination.3. Select size of display - from A4 to A14. Increase the impact of your display - add lighting. See page 51 for lighting available.


KW1A1 A1 1 PortraitKW1A2 A2 1 PortraitKW2A3 A3 2 PortraitKW3A4 A4 3 PortraitKW1A1L A1 1 LandscapeKW1A2L A2 1 LandscapeKW2A3L A3 2 LandscapeKW3A4L A4 3 LandscapeKits with double poster pockets:K7PW A4 6 PortraitK7PHW A3 1 Landscape

A4 6 Portrait Kits with treble poster pocketsK8PW A4 9 Portrait

K2A3L2 x A3

landscape

K7P3 x double A4

pockets

K8P3 x treble A4

pockets

K3A43 x A4 portrait

KW1A1LA1 landscape

Item No. ofCode: Pockets

A4 portrait pockets:KEH2/2 2x2KEH2/3 2x3KEH2/4 2x4

Examples:

KA2LA2 landscape

- using 1.5mm floor toceiling cable- to display A4 posters- acrylic pockets hookonto rods supportedon floor/ceiling cables

KW1A2A2 portrait

KW3A4L3 x A3 landscape

K7PW6 x A4 portrait

KW3A43 x A4 portrait

KEH2/36 x A4 portrait

KEH2/48 x A4portrait

KEH2/24 x A4portrait

K7PHW1 x A3 Landscape

6 x A4 portrait

K8PW9 x A4portrait

K7PHA3 landscape header plus

6 x A4 portrait pockets

9

Wall mounted kits Suction pad kits 3mm rod kits

Poster holders +leaflet dispensers

- acrylic pocket with wall mounts

Item Pocket Format:Code: Size:

KMA0PW-WM A0 PortraitKMA1PW-WM A1 PortraitKMA2PW-WM A2 PortraitKMA3PW-WM A3 PortraitKMA4PW-WM A4 PortraitKMA5PW-WM A5 Portrait

KMA1LW-WM A1 LandscapeKMA2LW-WM A2 LandscapeKMA3LW-WM A3 LandscapeKMA4LW-WM A4 LandscapeKMA5LW-WM A5 Landscape

- a highly attractive way topresent graphics and posters- A4 and A5 pockets are 2mmthick acrylic, all other sizes are3mm thick.- pockets supplied with satinchrome wall supports that holdthe pocket 25mm away from thewall

- a highly economical solution tocreate powerful window andinternal displays that are held inposition with suction pads.- No installation required - justassemble and fix to window.- select from A4 or A3 pockets,portrait or landscape.- each kit it supplied with 2 rods,4 clear suction pads, acrylicpockets, supports and fullassembly instructions.- kits available with 3 or 4pockets


KS1A2-3 A2 1 PortraitKS2A3-3 A3 2 PortraitKS3A4-3 A4 3 PortraitKS3A3-3 A3 3 PortraitKS4A4-3 A4 4 PortraitKS1A2L-3 A2 1 LandscapeKS2A3L-3 A3 2 LandscapeKS3A4L-3 A4 3 LandscapeKS3A3L-3 A3 3 LandscapeKS4A4L-3 A3 4 Landscape

- for displays that are suspendedfrom the top.- a floating option that allowsinformation to be changed easily- can be fitted to ceiling or wall- ideal for really awkwardwindows- supplied with 2m rods

- choose from floor to ceiling orwall mounted - A1portrait or A2 landscapeposter holder- kit comes with poster holder, 2x A4 leaflet dispensers, 5 x 1/3 A4leaflet dispensers.

Item Code: Items:

Floor to ceiling:K9D 1 x A1poster pocket

2 x A4 dispensers5 x 1/3 A4 dispenser4m cable

K10D 1 x A2 poster pocket2 x A4 dispensers5 x 1/3 A4 dispenser4m cable

Wall mounted:K9DW 1 x A1poster pocket

2 x A4 dispensers5 x 1/3 A4 dispenser3m cable

K10DW 1 x A2 poster pocket2 x A4 dispensers5 x 1/3 A4 dispenser3m cable


K4A4-3 A4 4 PortraitK3A4-3 A4 3 Portrait

Unique fittingallows the unit tobe pulled awayfrom the wall orwindow easily.

The bottom ofthe 3mm rod issupplied with astylish blackPVC end cap.

Easy accesspockets -change thedisplay withinseconds.

KMA1PW-WMA1 portrait

KMA1LW-WMA1 landscape

KS3A43 x A4 portrait

K9D

K4A4-3 K3A4-3

Picturecode topapersizes:

A1 A2 A3 A4 A5 1/3A41/3A4

A1Portrait: Landscape:

A4A3A3

KMA3LW-WMA3 landscape

10

KitsLeaflet dispensers


Freestanding units


K1D A4 3 PortraitK2D A4 3 x double Portrait

A4 pocketsK3D A5 3 x treble Portrait

A5 pocketsK5D 1/3 A4 3 x quadruple Portrait

1/3 A4 pockets

K1D3 x A4Portrait

K2D3 x double A4

Portrait

K5D3 x quadruple 1/3 A4

Portrait

K3D3 x treble A5

Portrait


K1DW A4 3 PortraitK2DW A4 3 x double Portrait

A4 pocketsK3DW A5 3 x treble Portrait

A5 pocketsK5DW 1/3 A4 3 x quadruple Portrait

1/3 A4 pockets

K1DW3 x A4Portrait

K2DW3 x double A4

Portrait

K5DW3 x quadruple 1/3 A4

Portrait

K3DW3 x treble A5

Portrait

10mm rod kits- units consist of 10mm stainlesssteel rods which are screwed intoa steel base. - Panel clamps support acrylicpockets or leaflet dispensers- supplied flat packed for easyassembly- 2000mm or 1500mm high

Item Size:Code:

2000mm high units:KF51P 4 x A4 portrait pocketsKF53P 3 x A3 portrait pocketsKF56DP 3 x A4 dispensers plus

1 x A4 portrait pocket

1500mm high poster holder units:KF50P 3 x A4 portrait pocketsKF52L 3 x A4 landscape pocketsKF53L 4 x A4 landscape pockets

1500mm high leaflet dispenser units:KF54D 3 x A4 single sided KF54DD 3 x A4 double sidedKF55DP 2 x A4 single sided plus

1 x A4 portrait pocket

Large freestanding kits

Item Size:Code:850mm wide frame with poster holders:KFR-759-A1 1 x A1 posterKFR-759-2A2 2 x A2 postersKFR-759-3A3 3 x A3 postersKF12P 3 x double A4

(6 A4 pockets)KF15P 4 x double A4

(8 A4 pockets)KF18P 3 x triple A4

(9 A4 pockets)KF19P 4 x triple A4

(16 A4 pockets)

KF51P4 x A4Portrait

KF54D3 x A4

single sidedleaflet dispensers

KF51P4 x A4Portrait

- larger units with many displayoptions using poster holders,leaflet dispensers and flat orsloping shelves- 3 frame widths to choose from,all units 1980mm high, base330mm diameter- supplied flat pack with easy tofollow assembly instructions- quickFit cable supplied cut tolength

KFR-759-A1A1 portrait

KF12P6 x A4 pockets

11

Shelving Hangingbanner rails

- ideal for suspending clothingand large banners- cables fit floor to ceiling- supplied with 25mm hangingrails, 914mm long, height fullyadjustable and 4m cables

Item Code: No. of Rails

KB1 1KB2 2KBS1 1 rail + 1 glass

shelf 618 x 330mmKB1P 1 rail +

1 x A2 landscape poster pocket

KB1PBanner rail plus

A2 poster pocket


- 2 x 6mm toughened safety glassshelves can be easily removed forcleaning.- supplied with 4m cable- add extra shelf or poster holder

Item Shelf size: Cable centres:Code: w x d w x d

Large:KS2A1 688 x 330 628 x 300Extra additions:K688330 Add extra shelfKMA2LW A2 landscape poster holderKMA1PW A1 portrait poster holderMedium:KS2A2 514 x 330 454 x 300Extra additions:K514330 Add extra shelfKMA3LW A3 landscape poster holderKMA2PW A2 portrait poster holderSmall:KS2A3 391 x 330 331 x 300Extra additions:K391330 Add extra shelfKMA4LW A4 landscape poster holderKMA3PW A3 portrait poster holderLarge Narrow:KS2NA1 688 x 180 628 x 150Extra additions:K688180 Add extra shelfKMA2LW A2 landscape poster holderKMA1PW A1 portrait poster holder

Item Shelf size: Cable centres:Code: w x d w x d

Large:KWS2A1 688 x 330 628 x 300Extra additions:K688330 Add extra shelfKMA2LW A2 landscape poster holderKMA1PW A1 portrait poster holderMedium:KWS2A2 514 x 330 454 x 300Extra additions:K514330 Add extra shelfKMA3LW A3 landscape poster holderKMA2PW A2 portrait poster holderSmall:KWS2A3 391 x 330 331 x 300Extra additions:K391330 Add extra shelfKMA4LW A4 landscape poster holderKMA3PW A3 portrait poster holderLarge Narrow:KWS2NA1 688 x 180 628 x 150Extra additions:K688180 Add extra shelfKMA2LW A2 landscape poster holderKMA1PW A1 portrait poster holder

- 2 x 6mm toughened safety glassshelves can be easily removed forcleaning.- supplied with 3m cable- add extra shelf or poster holder

KS2NA1 Large narrow

KS2A3 Small

KWS2A3Small

KWS2A2Medium

KS2A1 Large

KWS2A1 Large

KB1 KB2

KBS1Banner rail plus

glass shelfItem Size:Code:850mm wide frame with shelves:K21FS 3 large flat shelves

688 x 330mmK12FS 6 A4 sloping shelvesK14FS 6 A3 sloping shelves

1590mm wide frame with shelves:K20FS 6 large flat shelves

688 x 180mm

Item Size:Code:850mm wide frame with shelves AND poster:K18FS A1 poster holder plus

2 large flat glass shelves

1590mm wide frame with shelves AND poster:K22FS Double width

2 x A1 poster holderplus 4 large flat glass shelves

Item Size:Code:2 x 850mm wide, hinged frames with leafletdispensers:Single sided:KAF2-30D 6 x triple 1/3 A4

(30 1/3 A4 pockets)plus 2 x double A4 (4 A4 pockets)

Double sided:KAF2-30DD 6 x triple 1/3 A4

(60 1/3 A4 pockets)plus 4 x double A4(8 A4 pockets)

K20FS6 large flat

shelves

K12FS6 A4 sloping shelves

K18FSA1 poster plus 2 flat

shelves

KAF2-30D6 triple

1/3 A4 leafletdispensers

plus 2 doubleA4 pockets

KB1Single banner rail

KB2Double banner rail

All you need to createhigh impact signs

• Wall mountedsupports

• Suspended signs

• Directional signs

• Banner displays

• Hook-onpresentations

• Projecting signs

• Acrylic panels andposter holders

• Show off yoursigns with elegantillumination

• Instant solutionsfor exhibitionsignage

12

Signsystems

Signsystems

13

Wall-mounted sign supports

Supports for panels/signs with holes

• hold signs away from the wall • enhance appearance • easy to keep clean

WM1220mm length

WM05L-2040mm length

WM1525mm length

WM1650mm length

WM17 75mm length

* Componentsshown actual size

Black:All components shown on this page are in Satin Chrome finish. Most components are also available in the following finishes:

PolishedBrass:

PolishedChrome:

WarmChrome:

Item Code: Finish: Panel hole Panel Requires Price £:size: thickness: screw size:

WM12 Satin Chrome 9mm up to 12mm No. 6

Item Code: Finish: Panel hole Panel Requires Price £:size: thickness: screw size:

WM15 Satin Chrome 12mm 6-20mm No. 10



12mm diameter supports*


WM19 - Flush Cap

Designed to be used with a screwto mount a panel flat on the wall

WM19 Satin Chrome 6mm - No. 10

WM05-1325mm length

WM05-13 Satin Chrome 6mm up to 13mm No. 10

WM05L-20 Satin Chrome 6mm up to 20mm No. 10

WM0832mm overall length

Rubber shaft for use with glass.Can hold 2 x 6mm thick panelsonly. Barrel is 14mm long.

WM08 Satin Chrome 9mm 12mm No. 10


WM1825mm length

Supplied with a 19mm cap


Full dimensions - p74Standard finish satin chrome, all other finishes on request

WM0514mm length


14

Wall-mounted supportsAccessories for panels/signs with holes

Panel support - for signs, panels or acrylicpockets up to 7mm thick- locks to any angle- ideal to use with easy accesspockets (page 41)

Item Code: Finish:

WM09 Satin Chrome

For components tocreate stunningdirectory signs, pleasesee the cable and rodsections.

- make a strong design statementwith one panel in front ofanother to create a double-depthsign- takes a panel up to 6mm thick - also use to join two supportstogether to acheive requiredlength- invisible when in use

Support joiner/panel spacerItem Code: Finish:

PC31 Brass

Plastic spacer - enables a sign, panel or acrylicpocket to be fitted without a hole.Designed for use with 16mmdiameter fittings- available in 2 sizes: 2mm &3mm thick- saves time and money, as there isno need to drill panels- clean appearance as no visiblescrew

Item Code: Size:WMS-2 2mmWMS-3 3mm

Four way spacer - allows multiple panels to bebutted closely together.- holds panel on corner- takes panels up to 6mm thick

Item Code: Finish:

WM20 Satin Chrome

Supports for panels without holesPC31

WMS

WM01

15

Wall-mounted supportsClamps for signs/shelves

Item Code: Finish:

WM01 Satin Chrome

- supports that can be usedvertically for signs or horizontallyto support shelves- available in 2 sizes to hold

signs/shelves up to 10mm thick

For signs/shelves up to 7mm thickItem Code: Finish:

WM02 Satin Chrome

For signs/shelves up to 10mm thick

Item Code: Finish:

WM03 Satin Chrome

For signs/shelves up to 7mm thickItem Code: Finish:

WM04 Satin Chrome

For signs/shelves up to 10mm thick

WM02

WM03 WM04

Hooks

Hook - for panels up to 3mm thickwith holes

Item Code: Finish:

WM06 Satin Chrome

Picture hook Item Code: Finish:

WM07 Satin Chrome

Support for wooden sign or shelf- support that can be usedvertically for signs or horizontallyto support shelves- can be locked to any angle- for glass shelves add P08retaining screw

Item Code: Finish:

WM10 Satin Chrome

Useverticallyto supportsigns

Usehorizontallyto support

shelves

Retaining screw - to hold glass shelf or sign fittedwith WM10- holds 6mm thick as standard- plastic insert to protect glass- hole 6mm dia, 12mm fromedge

Item Code: Finish:

P08 Satin Chrome

Project 19mm from wall

Project 5mm from wall - supports that can be usedvertically for signs or horizontallyto support shelves- available in 2 sizes to holdsigns/shelves up to 10mm thick

Full dimensions - p74

Decorative wall plate Fixing panel to wall

- decorative plate that can bepositioned under any standardwall mount or sign support- creates an up-marketappearance and provides addedstrength to the installation- 38mm diameter

Item Code: Finish:

P01 Satin Chrome

- screw fix panel to wall- 12.5mm spacer

Item Code: Finish:

KPP-1 Satin Chrome

16

• Choose from 1.5mm or 3mmthick galvanised steel cables -will not fray, kink or mark,unlike stainless steel

• 1.5mm cable supports up to120kg, 3mm cable up to200kg

• Designed and manufactured tothe highest possiblestandards of quality

• Life time guarantee on allmetal components

• Extensive range ofcomponents and accessoriesensures complete designflexibility

• Low-voltage lighting can befully integrated onto the cablesystems

• Stylish yet discreet design

• Easy to install, with aninstallation service available ifrequired

• Available in standard finish -satin chrome. Polishedchrome, brass and specialfinishes are available onrequest

creative

flexible

highestquality

easy toinstall

Ceilingfitting

Crimpedcable end

Covercap

Cable

Bottomcover

Springtensioner

Washer

Cableendfixing

Floorfitting

Cable systems* Projects designed and installedby Atlas Display (DHB) Ltd

*

*

*

1.5mm cable - fitting options

17

All cables can be supplied in longer lengths. PolishedBrass:

PolishedChrome:

- the basic kit for fixingbetween ceiling and floor- includes top and bottomfittings, 4m of cable andspring tensioner- also available withinsulated cable for usewith lighting onexhibition stands

- ideal for supportingsigns and graphics - includes top and bottomfittings, spring tensionerand 3m cable

- use for suspending signsand graphics - includes top and bottomfittings, spring tensionerand 3m cable

- use for suspending signsand graphics- includes top and bottomfittings, spring tensionerand 3m cable

Ceiling to floor Ceiling to wall Wall to wall Wall to floor Angled top and bottom

Item code: Finish: Price £:

CCW Satin ChromeItem code: Finish: Price £:

CWW Satin ChromeItem code: Finish: Price £:

CWF Satin Chrome

Item code: Finish: Price £:Angled top to angled bottom: CAA Satin Chrome

Angled top to regular bottomfitting:CAF Satin Chrome

Item code: Finish: Price £:

CA4 Satin Chrome

With insulated cable:CA4S Satin Chrome

- use on sloping or flatsurfaces- includes top and bottomfittings, spring tensionerand 4m cable

K3A4L KW2A3 KW2A3L

*

Standard finish satin chrome, all other finishes on request

Item code: Item: Price £:

K3A4L KitK3A4 Kit

Item code: Item: Price £:

KW2A3 KitKW2A3L Kit

K3A4

18

Ceiling suspended fittings

1.5mm cable - fitting options

Ceiling fitting suppliedwith 2m long cable

- 2m long cablewith top fittingand panel clampto take up to7mm or 10mmthick panel- ideal forsupporting signs

- ideal forsupporting signs

Item Code: Finish:

C2 Satin Chrome

Top cablefitting andpanel clamp

Ceiling fittingwith cable andweight- top fitting with 4mlong cable and bottomweight measuring100mm h x 30mm dia.Weight 0.55kg- weight ensures tautcable for signs andbanners

Angled ceilingfitting withcable andweight- wall mounted support with adjustable angle.Weight 0.55kg- weight ensures tautcable for signs andbanners

Item Code: Finish:

CCT Satin Chrome

Item Code: Finish:

CAT Satin Chrome

Item Code: Finish:

KC2-CG05 Satin Chrome

Item Code: Finish:

KC2-CG05-10 Satin Chrome

For panels up to7mm thick

For panels up to 10mm thick

PolishedBrass:

PolishedChrome:

- can be used with any standard ceiling fitting or wall mount

Item Code: Finish:

HDS Satin Chrome

- can be used with any standardcable or 3mm rod - use below false ceiling to hidehole, giving a professional finish

Item Code: Finish:

CD-4 Satin Chrome

Decorative cover disc

Decorative support plate

Item Code: Finish:

P01-PC01 Satin Chrome

- can be used with any standardceiling fitting or wall mount

Extra strong ceiling/wall fitting


- cable design to be used withchannel top and bottom - includes 4m of cable, 2 quick fittoggles & spring tensioner

NB Not to be used with lighting

Item Code: Finish:

CQQ Satin Chrome

Quick fit cable

- thread through


19

1.5mm cable - fitting options Vertical Supports Double cable fittings

150mm cable centres

300mm cable centres

- available in 150mm and 300mm cable centres- creates a stylish support for shelving and graphics

Wall to wall fittings with two 3m cables

Item Code: Finish:

C2WW-15 Satin chrome

Item Code: Finish:

C2WW-30 Satin chrome

Wall to floor fittings withtwo 3m cables150mm cable centres

300mm cable centres

Item Code: Finish:

C2WF-15 Satin chrome

Item Code: Finish:

C2WF-30 Satin chrome

Ceiling to wall fittings withtwo 3m cables150mm cable centres

300mm cable centres

Item Code: Finish:

C2CW-15 Satin chrome

Item Code: Finish:

C2CW-30 Satin chrome

150mm or 300mm cable centres

150mmor

300mm

All cables can be supplied in longer lengths. PolishedBrass:

PolishedChrome:

Twin cable with singleceiling fitting- single ceiling fitting, with two4m long cables fixed to the floor- spacer bar to ensure cablecentres 300mm - other sizes available on request- tensioners fitted at bottom

Twin cable fittings

Item Code: Finish:

C2A4F Satin Chrome


KWS2A1


20

Vertical clamps

Panel clamps - 1.5mm cable

For acrylic accessories see pages 40-45

Single

Double

Single

Double

- with insert for holes. Supportstwo 6mm thick glass panels withposter between.

- can be locked into any position

Single

Double

For panels up to 4mm thick:

Multi-position clamps - can be locked at any angle

Clamps for wide panels

Item Code: Finish:SingleCG03 Satin Chrome

DoubleCG04 Satin Chrome



Item Code: Finish:

CG14 Satin Chrome

Item Code: Finish:

CG08 Satin Chrome



Single Item Code: Finish:SingleCG13 Satin Chrome


Single

Double Double

- top/bottom clamps for panels wider than the distance between cables

Item Code: Finish:

CG09 Satin Chrome Item Code: Finish:SingleCG12 Satin Chrome


Single


For panels up to 12.7mm thick: For panels up to 12.7mm thick with holes:

For panels up to 7mm thick: For panels up to 10mm thick:

For panels up to 7mm thick: Multi-position clamps for panels up to 7mmthick:

PolishedBrass:

PolishedChrome:



- hole size 6mm diameter- supports for panels up to 20mmthick available on request

Single

Double

- support for any item fittedwith boss fitting - see P02

Single

Double

For panels 5-6mm thick

21

Panel supports - 1.5mm cableSupports for panels with holes

Item Code: Finish:SingleCS13 Satin Chrome

DoubleCS23 Satin Chrome



Hooks

Hook for panels up to 3mm thick with holes

Single

Double

Item Code: Finish:SingleCH01 Satin Chrome

DoubleCH02 Satin Chrome

Picture hooks

Single Item Code: Finish:SingleCS12 Satin Chrome

Double - not shownCS22 Satin Chrome

CS13 & CS23for extra thick panels up to

20mm, specify size required. Ref example: CS13/S

Support

PolishedBrass:

PolishedChrome:

Supports for screw fix panels

Nylon tip screws


All panel and shelving clamps are supplied with nylon tip as standard*- nylon tip protects glass and acrylic* except CG03, CG04

For spare screws see page 28


- Boss for use with supportsCS03/CS04- use with up to No. 10

countersunk wood screw or bolt

Item Code: Finish:

P02 Nickel

P02 Boss

- as above, but double sided, toattach two components together

P02-2 Boss

Item Code: Finish:

P02-2 Nickel

22

Under-shelf support

Shelf supports - 1.5mm cable

Item Code: Finish:

CS01 Satin Chrome

- locates under shelf- inconspicuous- for drilled and slotted shelf- shelf hole size 10mm, slot width 2mm

Supports for wooden or glass shelves

- adjustable to any angle of slope- can be locked into position- for glass shelves add ref. P08(see right)

Screw to retain glass shelves

Single

Double



Used with CS11 or CS21 to hold6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from the edge ofglass

Item Code: Finish:

P08 Satin Chrome

Shelf support

Clamps for glass shelves

Clamp for glass shelves up to 7mm thickSingle

Double



Multi-position clamps for glass shelves

Clamp for glass shelves up to 12.7mm thick

Item Code: Finish:

CG15 Satin Chrome

- for glass shelves without holes - for glass shelves without holes

Multi-position clamp for glass shelvesup to 7mm thickSingle



Multi-position clamp for glass shelvesup to 10mm thick

- adjustable to any angle- can be locked into position

Double



Single

Double


PolishedBrass:

PolishedChrome:


23

Shelf & rod supports - 1.5mm cable

See page 43 for Acrylic Hook-on Accessories

Supports to hold rods

- for 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphics

Rod support - fixed position

Single

Double



- to hold 6mm rod

Item Code: Finish:

CS09 Satin Chrome

Rod support

Rod support - Multi-position- to hold 6mm rod- can be locked in any position

Unthreaded rod - 6mm dia Rod end caps

Item Code: Finish:

CS07 Satin Chrome

Item Code: Finish:0.5m rodR500P Satin Chrome

1m rodR1000P Satin Chrome

Item Code: Finish:End cap for 6mm rodREC Satin Chrome

Black PVC end cap for 6mm rodREC-P/BL Black

A4 pocketHA4PPage 41

CA4Page 17

Not more than 500mm

CS05

CS09

REC

PolishedBrass:

PolishedChrome:


24

3mm cable

Cable & panel clamps - 3mm cable

4m cable withceiling to floorfixings

3mm cable supports up to 200kg,giving all the advantages of arobust appearance with thesmallest size supports on themarket. Fittings have the samecable centres as 1.5mm cable. Seepage 26 for installationaccessories.

- includes spring loaded tensioner- the basic kit for fixing between

ceiling and floor- all cables can be supplied in

longer lengths

Item Code: Finish:

CA4-3 Satin ChromeAdd 75p for each extra metre of cable

Vertical clamps

For panels up to 7mm thickItem Code: Finish:

CG01-3 Satin Chrome

For panels up to 12.7mm thickItem Code: Finish:

CG14-3 Satin Chrome


Clamps for wide panels - Top/bottom supports for panels wider than the distance between cables

Item Code: Finish:SingleCG12-3 Satin Chrome

DoubleCG22-3 Satin Chrome

Single Double


Single

Double


Supports for panels with holes

Item Code: Finish:SingleCS13-3 Satin Chrome

DoubleCS23-3 Satin Chrome

PolishedBrass:

PolishedChrome:

- can be used with any standardcable or 3mm rod - use below false ceiling to hidehole, giving a professional finishItem Code: Finish:

CD-4 Satin Chrome

Decorative cover disc - thread through


Item Code: Finish:




25

Panel & shelf supports - 3mm cableMulti-position clamps for panels and shelves









Single

Double

Single

Double

Hooks

Hook for panels up to 3mm thick with holesSingle

Double

Item Code: Finish:SingleCH01-3 Satin Chrome

DoubleCH02-3 Satin Chrome

- support for any item fittedwith boss fitting P02- perfect to support hangingrails - page 47Item Code: Finish:

CS03-3 Satin Chrome


Under-shelf support

Item Code: Finish:

CS01-3 Satin Chrome

- locates under shelf- shelf is drilled - hole size 10mm- inconspicuous



Screw to retain glass shelves

Single

Double



Used with CS11-3 or CS21-3to hold 6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from the edge ofglass

Item Code: Finish:

P08 Satin Chrome

Shelf support

Clamp for glass shelves

Item Code: Finish:

CG15-3 Satin Chrome

For panels up to 12.7mm thick

PolishedBrass:

PolishedChrome:


- Boss for use with supportsCS03/CS04- use with up to No. 10

countersunk wood screw or boltItem Code: Finish:

P02 Nickel

P02 Boss


26

Brackets

Installation accessories

- available in 3 sizes- all units can be fitted to thewall using up to no 10 screws- supplied with nut and bolt toconnect cable/rod to bracket

Size:KMSB-25/SI: 30mm height, 35mmdepth, cable fixing: 25mm from wallKMSB/SI: 60mm height, 60mm depth,cable fixing: 50mm from wallKMSB-100/SI: 110mm height, 110mmdepth, cable fixing: 100mm from wall

- supplied with 2 nuts and boltsto connect cables/rods tobracket

- supports 2 cables/rods 300mmapart

- hi-tech appearance- can be used as a canopy or sign

supportSize: 350mm height, 350mm depth,cables/rods project 40mm and 340mmfrom the wall

3m dovetail channel- for ceiling, floor or wall mounting- makes cables/rods fully moveable- stylish appearance- NB order suitable toggle toconnect cable/rod to the channel(see below)

3m double sided channel - cable design to be used withchannel top and bottom - includes 4m of cable, 2 quick fittoggles & spring tensioner

NB Not to beused withlighting

for cable & rod installations

Single wall bracket

Item Code: Finish:

KMSB-25/SI SilverKMSB/SI SilverKMSB-100/SI Silver

KMSB-25/SI

KMSB-100/SI

KMSB/SI

Triangular wall bracket

Item Code: Finish:

KMDB/SI Silver

Channels and toggle fittings

Dovetail channel Rebate channel

Item Code: Finish:

ACD 3m SilverACD-2 2m silverACD-1 1m silver

3m rebate channel- for rebating into floor or shelves

with a flush finish- makes cables/rods fully moveable- NB order suitable toggle toconnect cable/rod to the channel(see below)

Item Code: Finish:

AC Silver

Isolators

Item Code: Finish:

CQQ Satin ChromeCQQ/PC Polished ChromeCQQ/BR Polished Brass

Quick fit toggle - brass toggle that screws intothe top end of a cable/rod orwall fitting- fits directly into almost anymake of channel- invisible when used

Quick fit cable

Item Code: Finish:

PC01-Q Brass for cablePR01-Q Brass for rod

Toggle

- for wall mounting with wallbrackets and toggles

Item Code: Finish:

ACL Silver

PolishedBrass:

PolishedChrome:


Top isolator- Black nylon for cables,white nylon for rods

Bottom isolatorCode:SP/IS For cables & rodsTop

Isolator

BottomIsolator

Add isolators when using channelor installing into metal ceilings orfloors

Bottom isolator- in 3 nylon sections

Top isolatorCode:PC01/I For cables PR01/I For rods

In-line rod isolator- insert when metalaccessories touch bothrods to avoid fusing

In-line isolatorCode:LIJ For 6mm rods

- for fixing cables/rods tochannels- can be used with all top andbottom fittings- supplied complete with allenkey, 12mm and 14mm longscrews

Item Code: Finish:

AT Silver

Easy fittoggle

Item Code: Finish:

K1008S-M5 Silver

AT K1008S-M5

27

Channel installation ideas for cable & rod installations

Channel solves manyinstallation challenges:- use channel when you wishto change the poster sizesand need different cable/rodcentres- use channel to create afeature area- use channel to bring thedisplay away from the wall orwindow- use channel to bridge over apoor fixing area- channel allows tremendousfixing flexibility. You canposition cables anywherealong their length

ACL channel with quick fit cable (ref: CQQ)

ACL channel can be mounted onthe wall or fixed from a windowframe by using KMSB supports,

allowing aprojection up to100mm

Bottom rodfitting withAT toggle

28

Tools and spares

GlassCleaner

AcrylicCleaner

NO RESPONSIBILITY IS TAKEN FOR USING THE INCORRECT FIXING IN THE WALL/CEILING. IF IN DOUBT - PLEASE ASK.

Glass cleaner- crystal clear finish, advancedformulation, high purity and non-abrasive

Item Code:

CL/G 1 litre

Acrylic cleaner- anti-static, polycarbonate,smear free

Item Code:

CL/A 1 litreCL.5/A 500ml

Cleaners

Tools

Allen keys- ensure you have the correctallen key for your support - seepage 74

Item Code: Size:AK1.5 1.5mmAK2.0 2.0mmAK2.5 2.5mmAK3.0 3.0mmAK4.0 4.0mmAK5.0 5.0mmAK6.0 6.0mm

Item Code: Size:HD1.5 1.5mmHD2.0 2.0mmHD2.5 2.5mmHD3.0 3.0mmHD4.0 4.0mmHD5.0 5.0mm

Hex driver- increases the speed of yourinstallation

Screws and fixings

Interset- use to fix into plasterboard onceilings or walls

Item Code:

IS545 M5 x 45mm

Wallplugs- for 8-10mm screws

Grubscrews for fittings- sparegrubscrews foruse withfittings

Item Code:

P13G/S M3 x 3mmP12 M3 x 6mmP11 M5 x 6mmP16 M4 x 6mmP18 M4 x 4mm

Nylon tipped screws- protects glass and acrylic

Item Code:

P10 M6 x 10mm

Spirit level- horizontal and vertical vial toallow perfect levelling

Item Code:

SPL

Bare cable

- 1.5mm diameter cable- available in 5 lengths- supplied with copper crimps

Item Code: Length:

BC1 1mBC2 2mBC3 3mBC4 4mBC5 5m

Miscellaneous

Item Code:

WPR Red


NB: solvent based cleaners (suchas polish) will mark and possiblycraze or damage acrylic, so westrongly recommend you use thisacrylic cleaner

Pictures for illustrations only

Small screws- for use with WM12

Item Code:

WS6X1 No. 6 x 1WS6X1.5 No. 6 x 1.5

Screws for channel- use to install channel toceiling/floor

Item Code:

WS8X1 No. 8 x 1WS8X1.5 No. 8 x 1.5

Screws for cable/rod- use to install cables/rods

Item Code:

WS10X1 No. 10 x 1WS10X1.5 No. 10 x 1.5

- minimum order quantity - 100

Ceilingfitting

Covercap

Rod

Bottomcover

Floorfitting

dynamicstrongvisualstatement

Rod systems

highestquality

Rod systems to suit yourdesign and budget• 3mm rods support up to 60kg

• 6mm & 10mm rods can supportup to 200kg

• Greater stability than the cablesystems, with a dynamic yetelegant look

• Designed and manufactured tothe highest possible standardsof quality

• Life time guarantee on all metalcomponents

• Extensive range of componentsand accessories ensurecomplete design flexibility

• Ideal for vertical and horizontalpresentations

• Easy to install with aninstallation service available ifrequired

• Available in standard finish -satin chrome. Polished chrome,brass and special finishes areavailable on request

29

3mm

6mm

10mm

30

3mm rod - fitting options

- designed for use wheredisplays are not changedoften or where there isplenty of access to changeposters - fittings screw directlyinto ceiling/floor- supplied with 3m longrod, threaded at bothends

Screw fix toceiling/floor

Ceiling to floor fitting...

Toggle fitting tofit into channel

- for fast, flexibleinstallations, use thistoggle option- displays fitted intochannel can be easilyrelocated to take differentposter sizes - faster to install ondifficult ceilings- supplied with 3m longrod, threaded at bothends

Suspended rods - from wall or ceiling

Suspend from ceiling or wall with ballbearing fitting- fitting available with or without toggle - either screws directly into wall or ceiling or orderfitting with toggle to fit into channel or freestandingunits.- ideal for display windows, close to the glass- allows the display to be moved at an angle, givingaccess for window cleaning and changing displays - highly practical fitting with end cap- perfect for displays that are changed frequently

Item Finish:Code:RBCF3 Satin Chrome

Item Finish:Code:RBTF3 Satin Chrome

Item Code: Finish: Rod LengthRBT1 Satin Chrome 1mRBT2 Satin Chrome 2mRBT3 Satin Chrome 3m

With quick fit toggle fitting for use in channels:

RBT1with ATtoggleforfixingintochannel

RB1standardfitting

Item Code: Finish: Rod LengthRB1 Satin Chrome 1mRB2 Satin Chrome 2mRB3 Satin Chrome 3m

Screw-in fitting:

15mm

See page 26 for channel optionsSee page 61 for freestanding frames


31

Clamps - 3mm rodVertical clamps

For panels up to 4mmthick

Item Code: Finish:

HR10-3 Satin Chrome

Multi-position clamps for panels and shelves


For panels up to 7mm thick- adjustable to any angle- can be locked into position

For panels up to 10mm thickSingle

Double

Single

Double

- Top/bottom supports for panelswider than the distance betweencables- adjustable to any angle- can be locked into position

Clamps for wide panelsSingle

Double


Single

Double



- non-removable panel clamp forpanels up to 4mm thick

Single

Double



- 10mm bar designed to take 4 x3mm rods at 244mm rod centres,which can be used with CG03-3 orCG04-4 to hold easy access pockets- overall length 764mm- rod centres 732mm

For panels up to7mm thick:

For panels up to12.7mm thick:

Item Code: Finish:

CG01-3 Satin ChromeItem Code: Finish:

CG14-3 Satin Chrome

Horizontal bar









End caps for 10mm bar

Item Code: Finish:

REC-10 Satin Chrome- add two REC-10 for eachhorizontal bar ordered


Horizontal 10mm bar

32

Supports - 3mm rod

Hooks


Double

- Support for any item fitted withboss fitting P02- perfect to support hanging rails




Single

Double

Used with CS11-3 or CS21-3to hold 6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from the edge ofglass

Shelf support

Item Code: Finish:SingleCH01-3 Satin Chrome

DoubleCH02-3 Satin Chrome

Picture hook

Item Code: Finish:

CS01-3 Satin Chrome

Under-shelf support

- locates under shelf- for shelf with 10mm hole- shelf is drilled - inconspicuous

Item Code: Finish:

CS12-3 Satin Chrome

Item Code: Finish:

CS03-3 Satin Chrome

Item Code: Finish:

P02 NickelSupportCS03-3

BossPO2

Screw to retain glassshelves



Item Code: Finish:

P08 Satin Chrome

Multi-position supports to hold rods

- holds 6mm diameter rod at anyangle- rods will hold acrylic pockets,leaflet holders, banners &graphics - can be locked into position

Support to hold 6mm rods Support to hold 10mm rods- holds 10mm diameter rod atany angle- can be locked into position

Item Code: Finish:

RR01-3/10 Satin ChromeItem Code: Finish:

RR01-3/6 Satin Chrome

Clamp for glass shelves

For panels up to12.7mm thick

Item Code: Finish:

CG15-3 Satin Chrome

Rod support for 6mm rod

Item Code: Finish:

CS05-3 Satin Chrome

- for 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphics


- can also be used on 3mm cable

6mm rod - fitting options

See page 43 for Acrylic Hook-on Accessories and page 49 for Hook-on Shelves

6mm rods and end caps

- 1.5m rod, left hand threaded atboth ends- rods can be joined together

Item Code: Finish:

R1500 Stainless steel

Item Code: Finish:

RAS Satin Chrome

Screw fit

Threaded rod - both ends Threaded rod - one end only- 0.5m rod, left hand threaded atone end, domed at the other

Item Code: Finish:

R500 Stainless steel

- available in 0.5m and 1mlengths

Unthreaded rod

Item Code: Finish:0.5mR500P Stainless steel

1mR1000P Stainless steel

Rod fitting options

Top/bottom fitting for rods

Item Code: Finish:

RAAS Satin Chrome

- adjustablethrough 180°,the top fittingcan be fixed toa horizontal,vertical orsloping surface

Angled top fitting plusbottom floor fitting

Rod ceiling fittings

- available as screw fit - use withthreaded rod or push fit withgrub screw

Push fit

Item Code: Finish:Screw fitRS Satin Chrome

Push fitRP Satin Chrome

Angled fittings

- available as screw fit - use withthreaded rod or push fit withgrub screw- adjustable through 180°

Item Code: Finish:Screw fitRSA Satin Chrome

Push fitRPA Satin Chrome

Wall fitting - projects 24mm- use vertical or horizontal- use up to no.10 screw to fix

Item Code: Finish:

WM11 Satin Chrome

Wall/panel fitting - projects 10mm- use vertical or horizontal- support to be used with Bossref. P02- minimum panel thickness 12mm- use up to no. 8 screw to fixRS03

P02

Item Code: Finish:

RS03 Satin Chrome

P02 Nickel

24mm

Rod end capsItem Code: Finish:End cap for 6mm rodREC Satin Chrome

Black PVC end cap for 6mm rodREC-P/BL Black

PolishedBrass:

PolishedChrome:

33


34

Panel clamps - 6mm rodVertical clamps

- supports signs from the sideSingle

Double


Item Code: Finish:SingleRG01 Satin Chrome

DoubleRG02 Satin Chrome

Item Code: Finish:

RGN01 Satin Chrome

For panels up to 7mm thick - non-removable

Multi-position clamps

Single




For panels up to 10mm thick- adjustable to any angle- can be locked into position

Double

- adjustable to any angle- can be locked into positionItem Code: Finish:SingleRG13 Satin Chrome


Single

Double

Multi-position clamps for wide panels

Single




- top/bottom clamps for panelswider than the distance betweenrods- adjustable to any angle- can be locked into position

Double

- to hold standard panels 5-6mm thick- hole size 6mm diameter- supports for panels up to20mm thick are also available - see ordering information onthe right

Single

Double

For panels 5-6mm thick: Item Code: Finish:SingleRS13 Satin Chrome

DoubleRS23 Satin Chrome

RS13 & RS23for extra thick panels up to

20mm, specify size required. Ref example:

RS13/S


All rod fittings are easyto install and remove

PolishedBrass:

PolishedChrome:


Supports - 6mm rodSupports for screw fix panels

Single

Double

- support for any item fitted withboss fitting P02 - see right

Item Code: Finish:SingleRS03 Satin Chrome


Sign support

- Supports signs from above


Item Code: Finish:

RG05 Satin Chrome

Hooks

Hook for panels up to 3mm thick with holes

Single Item Code: Finish:SingleRH01 Satin Chrome

DoubleRH02 Satin Chrome

Picture hooks

Single

Under-shelf support


- locates under shelf- shelf requires 10mm diameterhole- non-removable support

Support



PolishedBrass:

PolishedChrome:

Double

35


- Boss for use with supportsRS03/RS04- use with up to No. 10

countersunk wood screw or bolt

Item Code: Finish:

P02 Nickel

P02 Boss

- as above, but double sided, toattach two components together

P02-2 Boss

Item Code: Finish:

P02-2 Nickel

Light weight signs only

Shelf supports - 6mm rod

See page 33 for 6mm Diameter Rods See page 43 for Acrylic Hook-on Accessories



Screw to retain glass shelvesSingle

Double



Used on on RS11 or RS21to hold 6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from edge of glass

Item Code: Finish:

P08 Satin Chrome

Shelf support

Clamps for glass shelves and panels

Clamp for glass shelves up to 7mm thickSingle

Double



Multi-position clamps for glass shelves and panels

- for glass shelves without holes

Multi-position clamp for glass shelves and panelsup to 7mm thickSingle



Multi-position clamp for glass shelves and panelsup to 10mm thick


Double



Single

Double


Supports to hold rods- for 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphics etc

Single

Double



Rod support Rod support - Multi-position

- to hold 6mm rod- support for rods at any angle- can be locked into position

Item Code: Finish:

RR01 Satin Chrome

PolishedBrass:

PolishedChrome:

36


37

10mm rod - fitting options 10mm threaded rod

NB: All 10mm rod fittings shown here are NON-REMOVABLE and are threaded onto the rod at the time of installation

- 10mm rod, right hand threaded- available in .5m, 1m and 1.5mlengths

Item Code: Finish:

R1500-10 Stainless steelR1000-10 Stainless steelR500-10 Stainless steel

Threaded rod - both ends Rod end caps

Item Code: Finish:End cap for 10mm rodREC-10 Satin Chrome

Item Code: Finish:

RAS-10 Satin Chrome

Rod fitting options

Top/bottom fitting Ceiling fitting

Item Code: Finish:

RS-10 Satin Chrome

- wall mounted fixing to hold therod 27mm from the wall

Item Code: Finish:

CD-10 Satin Chrome

Item Code: Finish:

WM11-10 Satin Chrome

In-line connector Decorative cover disc - thread through

- allows a 6mm horizontal rod tobe fitted flush to the vertical10mm rod

Item Code: Finish:

RC10-6 Satin Chrome

Wall mounted fittings - vertical or horizontal

Item Code: Finish:

WM11L-10 Satin Chrome

- heavy duty ceiling/wall supportwith 3 screw holes for extra securefixing

Item Code: Finish:

HDS Satin Chrome

- wall mounted fixing to hold therod 50mm from the wall- ideal for use with narrowshelves


Item Code: Finish:


- can be used with any standard6mm or 10mm diameter rod - use below false ceiling to hidehole, giving a professional finish


- screw fix for use withthreaded rod

Extra strong ceiling/wall fitting


38

Panel clamps - 10mm rod

NB: All 10mm rod fittings shown here are NON-REMOVABLE and are threaded onto the rod at the time of installation

Vertical clamps

Single

Double


Item Code: Finish:SingleRG01-10 Satin Chrome

DoubleRG02-10 Satin Chrome

For panels up to 12.7mm thick:

Item Code: Finish:

RG14-10 Satin Chrome

Multi-position clamps

Single

For panels up to 7mm thick: For panels up to 10mm thick- adjustable to any angle- can be locked into position

Double


Single

Double

Multi-position clamps for wide panels

Single

For panels up to 7mm thick- top/bottom supports for panelswider than the distance betweenrods- adjustable to any angle- can be locked into position

Double







- hole size 6mm diameter- to hold standard panels 5-6mmthick- for extra thick panels up to20mm, specify size required.

Single

Double



Item Code: Finish:SingleRS13-10 Satin Chrome

DoubleRS23-10 Satin Chrome

Hooks


Double

Picture hookSingle

Item Code: Finish:

RS12-10 Satin ChromeItem Code: Finish:SingleRH01-10 Satin Chrome

DoubleRH02-10 Satin Chrome


Amersham Sign Design Window & Display Components Br

Documents

Transcript of Amersham Sign Design Window & Display Components Br