AMERICAN STANDARD · connector cutout (b) roughing - in (a) connector cutout (b) roughing - in (a)...

4
780 125 235 190 553 10 x 2 35 x 2 88 390 35 43 ***Dimensions are nominal measurements only. 680 385 390 780 190 140-245 553 364 305 180 180 210 210 WATER SUPPLY WATER SUPPLY 410 370 AMERICAN STANDARD To see the complete AMERICAN STANDARD range go to www.reece.com.au/bathrooms page 1 of 4 ACACIA E VORTEX CC BTW CLEANING RECOMMENDATIONS INSTALLATION INSTRUCTIONS (BOTTOM INLET) Colour Weight Water Inlet Position Rim less, Double vortex Soft Close Seat Bolted directly to bowl and bedded with sealant Pan xing Cistern xing Seat Inlet valve Bowl Con guration Rim Con uration Recommended use Domestic Hotel and Commercial Material Pan : Vitreous China Cistern : Vitreous China Seat : Urea Pan: White Cistern: White Seat: White Pan : 38.0 kg Cistern : 10.5 kg Bottom Inlet Recommended maximum working pressure 500kpa P trap (converts to S Trap using plastic s bend provided) SPECIFICATION We recommend the use of soapy water or approved cleansers.This product should not be cleaned with abrasive materials.Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions. Tech Page Version 1 Disclaimer : listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. TM WMKA21024 AS 1172.1 The more stars the more water efficient 3.5 litres average flush 4.5 L per full flush / 3 L per half flush In accordance with AS/NZS 6400 Licence No. 0050 LIXIL (Thailand) Public Company Limited Sep 2017 M33009 Rev.02

Transcript of AMERICAN STANDARD · connector cutout (b) roughing - in (a) connector cutout (b) roughing - in (a)...

Page 1: AMERICAN STANDARD · connector cutout (b) roughing - in (a) connector cutout (b) roughing - in (a) c=116 - (a-160) cutout (b) roughing - in (a) 140-150 mm. 151-159 mm. 10 mm. 20 mm.

780

125

235 190

55310 x 2

35 x 2 88

390

35

43

***Dimensions are nominal measurements only.

680

385

390

780

190

140-245553

364

305

180180

210 210

WATERSUPPLY

WATERSUPPLY

410

370

AMERICAN STANDARD

To see the complete AMERICAN STANDARD range go towww.reece.com.au/bathrooms

page 1 of 4

ACACIA E VORTEX CC BTW

CLEANING RECOMMENDATIONS

INSTALLATION INSTRUCTIONS (BOTTOM INLET)

Colour

Weight

Water Inlet Position

Rim less, Double vortex

Soft Close Seat

Bolted directly to bowl

and bedded with sealantPan xing

Cistern xing

Seat

Inlet valve

Bowl Con guration

Rim Con uration

Recommended use Domestic Hotel and Commercial

Material Pan : Vitreous China Cistern : Vitreous China Seat : Urea

Pan: WhiteCistern: WhiteSeat: White

Pan : 38.0 kgCistern : 10.5 kg

Bottom Inlet

Recommended maximum working pressure 500kpa

P trap (converts to S Trap using plastic s bendprovided)

SPECIFICATION

We recommend the use of soapy water or approved cleansers.This product should not be cleaned with abrasive materials.Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.

Tech Page Version 1

Disclaimer :

listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.

TM

WMKA21024AS 1172.1

The morestars the morewater efficient

3.5 litresaverage flush

4.5 L per full flush / 3 L per half flush

In accordance with AS/NZS 6400

Licence No. 0050LIXIL (Thailand) Public Company Limited

Sep 2017M33009 Rev.02

Page 2: AMERICAN STANDARD · connector cutout (b) roughing - in (a) connector cutout (b) roughing - in (a) c=116 - (a-160) cutout (b) roughing - in (a) 140-150 mm. 151-159 mm. 10 mm. 20 mm.

7

190

BC

A

Ø5

6a 160-170 mm.171-180 mm.181-190 mm.191-200 mm.201-210 mm.

30 mm.40 mm.50 mm.60 mm.70 mm.

211-220 mm. 80 mm.221-230 mm.231-240 mm.241-250 mm.

90 mm.100 mm.110 mm.

CONNECTOR CUTOUT (B)

ROUGHING - IN (A)

CONNECTOR CUTOUT (B)

ROUGHING - IN (A)

C=116 - (A-160)

CONNECTOR CUTOUT (B)

ROUGHING - IN (A)140-150 mm.151-159 mm.

10 mm.20 mm.

5a

140~245

140~245

190

B

A

75

75

140-245 mm

Ø10Ø10

AMERICAN STANDARDpage 2 of 4

5a 6a

1 2

4a3a

7

210

210

180

180

ACACIA E VORTEX CC BTWINSTALLATION INSTRUCTIONS (BOTTOM INLET)

Sep 2017M33009 Rev.02

Page 3: AMERICAN STANDARD · connector cutout (b) roughing - in (a) connector cutout (b) roughing - in (a) c=116 - (a-160) cutout (b) roughing - in (a) 140-150 mm. 151-159 mm. 10 mm. 20 mm.

1b

190

75

75

Ø10Ø10

2b

3b 4b

5b 6b

AMERICAN STANDARDpage 3 of 4

98 Ø22*Only for bottom inlet applications

WATER SUPPLY WATER SUPPLY

RIGHT SIDE LEFT SIDE

210 210180 180

ACACIA E VORTEX CC BTWINSTALLATION INSTRUCTIONS (BOTTOM INLET)

190

Sep 2017M33009 Rev.02

Page 4: AMERICAN STANDARD · connector cutout (b) roughing - in (a) connector cutout (b) roughing - in (a) c=116 - (a-160) cutout (b) roughing - in (a) 140-150 mm. 151-159 mm. 10 mm. 20 mm.

10 11

ACACIA E VORTEX CC BTWAMERICAN STANDARD

INSTALLATION INSTRUCTIONS (BOTTOM INLET)

page 4 of 4

1

23

4

7

6

11 12

5

FLUSH BUTTON KIT1 - 9507355

2 - 9503379 INLET VALVE

DUAL FLUSH OUTLET VALVE COMPLETE

3 - 1817018

TOP FIX CISTERN BOLTS (PAIR)4 - 9504528

5 - 9506467 CC CISTERN TO PAN RUBBER SEALPAN BEND 6 - 9503902

7 - 9500851 PAN FIXING BRKT &COVER

Sep 2017M33009 Rev.02