Ambica Steels is Indias leading fully integrated stainless steel producer, established in year 1970. With a melt size / cast size of 22 tons, Ambica produces around 80,000 tons of stainless every year in most Austenitic, Ferritic, Martensitic, Precipitation Hardening and Duplex grades. It is located at 45 minutes drive from the International Airport of New Delhi, INDIA. Ambica exports to more than 50 countries worldwide. Today, Ambica Steels is respected for delivering the finest quality stainless steels in a broad range of finished and semi-finished Long products.

stainless steelAmbica Steels

Ambica Steels

45

Ambica Steels

50

Ambica Steels Limited

Ambica Steels LimitedC-54/1, Wazirpur Industrial Area, New Delhi 110052, INDIAPhones / : +91 (11) 4703 4400 (30 lines)Fax / : +91 (11) 4703 4450E-mail / : info@ambicasteels.comWebsite / : www.ambicasteels.com

Ambica Steels Limited

PROFILES /

Manufacturing Technology /

Material Testing Facilities / 100% Ultrasonic Testing of internal defects Radiation Servo Meter Eddy Current Testing Microstructure Macrostructure IGC Testing Delta Ferrite Measurement Non Metallic Inclusion Rating (as per ASTM E45 & DIN 50602 K4 method) Radioactive Dosimeters and Lab to ensure 100% Radiation free material. Mechanical test like Tensile, Hardness, Elongation, Impact Test, Reduction etc.

Certificates /

Ambica is one of the most updated stainless steel producer in the world, employing a wide range of ultra-modern steel manufacturing technology.

Electric Melting Furnace 80,000 tons capacity Argon Oxygen Decarburization (A.O.D) Converter Ladle Refining Furnace (L.R.F) Billet / Bloom Continuous Casting Ingot Casting (Bottom Pouring) Hot Rolling Mills Heat Treatment Division Bright Bars Division Angles and Flat Bars Division

$2'/5)

Ambica

100% (IGC) DeltaASTM E45 & DIN 50602 K4) 100%

ISO 9001:2000

ISO 14001:2004

(P.E.D - 97/23/EC)

(AD 2000)

OHSAS 18001:1999

(AS 9100 : 2003)

ISO 9001:2000

ISO 14001:2004

Pressure Equipment Directive(P.E.D - 97/23/EC)

AD 2000 Merkblatt W0/TRD 100

OHSAS 18001:1999

Boiler Quality Steel Certification Shipbuilding Material Manufacturer Certificate

Aerospace Certificate (AS 9100:2003)

We have the entire range of Stainless Steel long products starting from Semi-Finished Steels, Bright and Cold Finished Steels, Precision Shafting Bars (PSQ Bars), Duplex Stainless Steels, Precipitation Hardening Stainless Steels, Angles and Flat bars.

Above products are available with Ambica in the following grades

AISI Grades 301, 302, 303, 304/L, 304H, 304LN, 305, 310/S, 314, 316H, 316/L, 316LN, 316Ti, 317, 321, 321H, 347, 409, 410, 416, 420 A/B/C, 430/F, 431, 434, F-51,

2205, 17/4PH, 201, 202, 204Cu, 204 etc and can also be supplied in JIS, DIN, EN, BS etc.

Website: www.ambicasteels.com

Product Profile /

FLAT BARS HRAP & COLD DRAWN

40 x 4 mm 150 x 20 mm1-1/2 x 3/16 6 x 3/4"

EQUAL & UNEQUAL ANGLES (Hot Rolled, Annealed & Pickled)

25 x 25 x 3 mm 80 x 80 x 8 mm1 x 1 x 1/8 3.1/2 x 3.1/2 x 3/8

HOT ROLLED BLACK BARS / RCS

16 mm 125 mm5/8 5

CONTINUOUS CAST BILLETS / 120 x 120 mm, 140 x 140 mm, 160 x 160 mm,

200 x 200 mm, 220 x 250 mm,in lengths upto 8.5 meters

FORGING INGOTS / upto 22 ton weight per piece in Round,

Square & Polygonal shapes. (Pls contact us for detailed drawings)

SEMI FINISHED STEELS /

COLD FINISHED BARS /

Ambica Steels 364

BRIGHT ROUND BARS / 5 mm 120 mm3/16 4.3/4

COLD DRAWN SQUARE BARS /12 mm 40 mm

1/2 1.1/2

COLD DRAWN HEXAGONS / 12 mm 45 mm1/2 1.3/4

PROFILES /

Manufacturing Technology /

Material Testing Facilities / 100% Ultrasonic Testing of internal defects Radiation Servo Meter Eddy Current Testing Microstructure Macrostructure IGC Testing Delta Ferrite Measurement Non Metallic Inclusion Rating (as per ASTM E45 & DIN 50602 K4 method) Radioactive Dosimeters and Lab to ensure 100% Radiation free material. Mechanical test like Tensile, Hardness, Elongation, Impact Test, Reduction etc.

Certificates /

Ambica is one of the most updated stainless steel producer in the world, employing a wide range of ultra-modern steel manufacturing technology.

Electric Melting Furnace 80,000 tons capacity Argon Oxygen Decarburization (A.O.D) Converter Ladle Refining Furnace (L.R.F) Billet / Bloom Continuous Casting Ingot Casting (Bottom Pouring) Hot Rolling Mills Heat Treatment Division Bright Bars Division Angles and Flat Bars Division

$2'/5)

Ambica

100% (IGC) DeltaASTM E45 & DIN 50602 K4) 100%

ISO 9001:2000

ISO 14001:2004

(P.E.D - 97/23/EC)

(AD 2000)

OHSAS 18001:1999

(AS 9100 : 2003)

ISO 9001:2000

ISO 14001:2004

Pressure Equipment Directive(P.E.D - 97/23/EC)

AD 2000 Merkblatt W0/TRD 100

OHSAS 18001:1999

Boiler Quality Steel Certification Shipbuilding Material Manufacturer Certificate

Aerospace Certificate (AS 9100:2003)

We have the entire range of Stainless Steel long products starting from Semi-Finished Steels, Bright and Cold Finished Steels, Precision Shafting Bars (PSQ Bars), Duplex Stainless Steels, Precipitation Hardening Stainless Steels, Angles and Flat bars.

Above products are available with Ambica in the following grades

AISI Grades 301, 302, 303, 304/L, 304H, 304LN, 305, 310/S, 314, 316H, 316/L, 316LN, 316Ti, 317, 321, 321H, 347, 409, 410, 416, 420 A/B/C, 430/F, 431, 434, F-51,

2205, 17/4PH, 201, 202, 204Cu, 204 etc and can also be supplied in JIS, DIN, EN, BS etc.

Website: www.ambicasteels.com

Product Profile /

FLAT BARS HRAP & COLD DRAWN

40 x 4 mm 150 x 20 mm1-1/2 x 3/16 6 x 3/4"

EQUAL & UNEQUAL ANGLES (Hot Rolled, Annealed & Pickled)

25 x 25 x 3 mm 80 x 80 x 8 mm1 x 1 x 1/8 3.1/2 x 3.1/2 x 3/8

HOT ROLLED BLACK BARS / RCS

16 mm 125 mm5/8 5

CONTINUOUS CAST BILLETS / 120 x 120 mm, 140 x 140 mm, 160 x 160 mm,

200 x 200 mm, 220 x 250 mm,in lengths upto 8.5 meters

FORGING INGOTS / upto 22 ton weight per piece in Round,

Square & Polygonal shapes. (Pls contact us for detailed drawings)

SEMI FINISHED STEELS /

COLD FINISHED BARS /

Ambica Steels 364

BRIGHT ROUND BARS / 5 mm 120 mm3/16 4.3/4

COLD DRAWN SQUARE BARS /12 mm 40 mm

1/2 1.1/2

COLD DRAWN HEXAGONS / 12 mm 45 mm1/2 1.3/4

Ambica Steels is Indias leading fully integrated stainless steel producer, established in year 1970. With a melt size / cast size of 22 tons, Ambica produces around 80,000 tons of stainless every year in most Austenitic, Ferritic, Martensitic, Precipitation Hardening and Duplex grades. It is located at 45 minutes drive from the International Airport of New Delhi, INDIA. Ambica exports to more than 50 countries worldwide. Today, Ambica Steels is respected for delivering the finest quality stainless steels in a broad range of finished and semi-finished Long products.

stainless steelAmbica Steels

Ambica Steels

45

Ambica Steels

50

Ambica Steels Limited

Ambica Steels LimitedC-54/1, Wazirpur Industrial Area, New Delhi 110052, INDIAPhones / : +91 (11) 4703 4400 (30 lines)Fax / : +91 (11) 4703 4450E-mail / : info@ambicasteels.comWebsite / : www.ambicasteels.com

Ambica Steels Limited