Aluminium façade scaffolding P.L.A....With the use of some additional accessories, it is possible...
Transcript of Aluminium façade scaffolding P.L.A....With the use of some additional accessories, it is possible...
186
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
187
Company | Projects | Products
ALUMINIUM SCAFFOLDING FOR MAINTENANCE AND RESTORATION COMPANIES
The P.L.A. façade prefabricated scaffolding in aluminium is the most appropriate and specific system for short-term operations such as those involving maintenance, painting and restoration, both for interior and exterior which sometimes are carried out by female personnel. Unlike medium-long term construction sites, these tasks are usually short term and, therefore, the assembly and disassembly operations of scaffolding must be quick, simple and safe not to affect the overall timing of the operation.
The use of the aluminium as a raw material allows creating elements which do not require surface treatments for protection against atmospheric agents and do not require periodic maintenance. The reduced weight of components makes them easy to be manually handled resulting in reduced assembly and disassembly time. The use of the aluminium equipment is perfectly suitable to minimize the weight of the provisional structure in special situations such as the restoration of historic buildings with wooden slabs or buildings with antique marble floors and, more generally, of supports on roofs or on structures that are not resistant.
The aluminium finishing, aesthetically pleasing, can be easily suited for prestigious places such as churches and historic buildings, as well as in contexts open to the public with works in progress.
Finally, we cannot underestimate the possibility of using small capacity trucks to transport the scaffolding on construction sites and on historic centers.
With the use of some additional accessories, it is possible to convert the P.L.A. façade scaffold in a certified “tower” on wheels, for quicker or special operations.
P.L.A. MODELWith double-braced aluminium rail: it is a structural element that acts as a stabilizer and facilitates the proper leveling of the scaffold, allows very quick operations of assembly and disassembly, has 4 quick coupling points, a reduced weight and a number of anchoring points.
ALU SIMPEL MODELIt uses the same components as the P.L.A. model except for the security rail: in the ALU SIMPEL model the rail consists of two horizontal uprights. At any moment the uprights can be replaced by braced rail.
Scaffolding P.L.A. and ALU SIMPEL are marketed under the brand LAMA.
188
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
189
Company | Projects | Products
STRENGTHS
• lightness, but it has the same performances as a steel scaffolding for maintenance
• it is very easy to be handled• high-speed in assembly and disassembly stages• simple and intuitive preparation• braced rail with 4 coupling points which ensure great stability to scaffolding
and quick assembly• tables with lifting handles for a functional assembly• transportation by using small capacity trucks • low weight that allows you to fasten it on any structure and to use it also
on fragile floors• system constituted of few modular components• with its components and adding few accessories you can also construct
mobile towers on wheels• anchoring points every 20 m2.
CHARACTERISTICS
• high-performance structural aluminium alloy• aluminium pipes for stringers, uprights and diagonals with 48 mm diameter• portal frame with pin connections • table in wood and aluminium or galvanized steel• braced structural rail in aluminium (P.L.A. model) • rail with double horizontal upright in steel (ALU SIMPEL model)• spacing 2,00 m and 2,50 m• capacity 150 kg/m²• different spacing and capacities available on request
WEIGHT for P.L.A. aluminium scaffolding 2.50 m spacing:• frame 8.5 kg • braced double rail 6 kg• work surface table in aluminium 10 kg• toe-boards 6 kg
MODULARITY
VERSATILITY
HIGH PRODUCTIVITY
SPECIAL ACCESSORIES
P.L.A.
190
Advantages: Quick assembly, structurally very strong because it stabilizes the
structure and operates as a rail.
ALUMINIUM DOUBLE RAIL WITH WIND BRACING FUNCTION
ALUMINIUM ALU SIMPEL WITH DOUBLE UPRIGHT RAIL
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
191
Company | Projects | Products
ASSEMBLY OF A TEMPORARY RAIL FOR THE SAFE ASSEMBLY ANDDISASSEMBLY OF SCAFFOLDING WITHOUT USING P.P.E.
Assembling a temporary rail allows you to temporarily place the guard of any work surface directly from the lower floor. This allows the operator, once he has climbed on the work surface, to complete safely the assembly of the bays by moving the rail once the final elements have been assembled. Repeating the aforesaid operation you can complete the assembly of the whole scaffolding.
This device is in aluminium; it weighs only 13 kg and can be disassembled into two parts to allow an easy transportation. You can apply the toe-boards.
The use of individual protection equipment, (restraint line, safety belt, retractable winder, etc.) that limit the assembly and disassembly operations, is not required if the rail is assembled.
192
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
193
Company | Projects | Products
P.L.A. scaffolding is suitable for all the perimeter walls 28 meters high. By using the double-braced rail, the scaffolding is also suitable to create bays of reduced length without necessarily increasing the number of façade diagonals.
On the façades of historic buildings, with engaged columns and moldings and other various objects , it is particularly convenient to use the P.L.A. aluminium scaffolding set with interior and exterior cantilever brackets.
Maintenance operation while the scaffolding rail assembly is in the completion stage. A typical example is the scaffolding consisting of several vertical fields to follow the irregular shape of the façade.
P.L.A. scaffolding with stop piers allows access to the interior of a building. The stop piers beams can be positioned at any height, depending on the needs thanks to versatility of the fastening through joints embedded in the beam.
194
Maintenance of a bell tower of considerable height. The side facing the roof of the apse is cantilevered and completely hanged and bound to the wall through brackets with reinforced beams with plate anchors and tie-rods to prevent the structure from laying on the roof.
Using the same components of the P.L.A. scaffold it is possible to create structures of various sizes and shapes which can be moved on wheels in any direction. These structures can be used both for operations on façades and for interior operations on vaults and domes. The movement can be manual or supported.
It is possible to set up the P.L.A. scaffolding also on prefabricated structures with a circular plan by subdividing the structure in basic elements to better define the curved wall and limit the number of diagonals.
At this site, the scaffolding has reached 44 m of height by using on the exterior side also the brackets to balance the shrinkage of the structure depending on the height and it was not necessary to double the base stringers.
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
195
Company | Projects | Products
196
Use of the bracket for intervention on the roof. For operations lasting more than 5 days a level underneath must be prepared for safety.
Solution for intervention on the outside of railing for a balcony by using the inner plane.
Example of a continuation of the cantilevered scaffold with the use of shelves 80 cm and80x200 cm struts for shelves from galvanized steel.
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
197
Company | Projects | Products
Construction of a pedestrian walkway for the entire length of the scaffolding through the use of frames in galvanized steel for pedestrian underpass.
In addition, standard tables can be used with a trap door and stairs to the ramp which allows easier access to the floors. This system allows
restoration work as well as access by individuals not involved in the work in case of inspections.
198
Example of scaffold with a sloped mounting surface. Various types of accessories such as adjustable bases and frames of different heights have been used to compensate for the difference.
CONSTRUCTION ON AN INCLINED PLANE
INTERRUPTION OF STYLE FOR VEHICLE OR PEDESTRIAN CROSSINGS
The beam can be positioned at the height required by the need of the job site..
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
199
Company | Projects | Products
Guards made of galvanized steel and modular PVC sheets – with mounting pegs.
RAIN PROTECTION FOR SCAFFOLDING AND MOBILE TOWERS
200
P.L.A. MOBILE TOWERS ON WHEELS
Using the same components of the fixed scaffolding and a limited number of accessories, it is possible to build mobile towers on wheels for various needs and for considerable heights. EN 1004 certification.
Base 2.50x1.70 m. The height of the tower varies from 3.60 m to 13.60 m, with a maximum work height from 4.40 m to 14.40 m. The weight varies from 298 kg to 1115 kg
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
201
Company | Projects | Products
Base components for P.L.A. mobile tower on wheels.1 250x31 cm table in aluminium, galvanized steel or in wood /aluminium2 trapdoor with 250x62 cm stair in aluminium or wood / aluminium3 swiveling coupling in galvanized steel Ø 484 250x50 cm double rail in aluminium5 80x200 cm frame in aluminium6 base for 2 frames with 2 adjustable 500 kg galvanized steel wheels7 250 cm plywood table for tower in galvanized steel8 250 cm movable upright in galvanized steel
MOBILE TOWER ON WHEELS WITH P.L.A. COMPONENTS
4 65
7
1
3
2
202
Utilizing a tower in a church.You can reach great heights with a design created by a qualified professional.
Aluminium façade scaffolding P.L.A.
Alum
iniu
m s
caff
oldi
ngs
203
Company | Projects | Products
Mobile tower unit with wall anchorfor maintenance of the façade.Size in plan:length 5,00 mwidth 1,70 mmaximum height 9,60 m
MOBILE TOWER ON WHEELS WITH COMPONENTS P.L.A.
P.L.A. Mobile Tower large area for restoration work on the ceilings and vaulted ceilings. The top can be reached by access stairs at each level. The internal span opening was replaced by safety nets. The scaffolding tower consists of two side by side units, connected with brace frames and diagonals, mounted on bases with wheels for traveling. The large work surface on the top allows more teams to work simultaneously.Size in plan: 5,00x4,10 m Maximum Height: 21,60 m.
204
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
P.L.A.
FRAME 80X200IN ALUMINIUM
801102000800 800x2000 8.5
REDUCED FRAME 80X100IN ALUMINIUM
801101000800 800x1000 5.8
REDUCED FRAME 80X63IN ALUMINIUM
801100630800 800x630 4.4
REDUCED FRAME 80X150IN ALUMINIUM
801102500800 800x1500 7.0
GALVANIZED BOTTOM FRAMEWITH ENLARGEMENT 40X80X200
801522000400 400/800x2000 21.0
GALVANIZED BOTTOM FRAME40X200
801512000400 400x2000 18.0
GALVANIZED FRAMEFOR PEDESTRIANS UNDERPASS 120X220
801102201200 1200x2200 31.0
TERMINAL ELEMENT 80X120IN ALUMINIUM
801321200800 800x1200 3.0
SIDE PASSAGE ELEMENTFOR OVERHANGING BRACKET
801341200400 400x1200 2.0801241200800 800x1200 3.0
Alum
iniu
m s
caff
oldi
ngs
205
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
VERTICAL GALVANIZEDBRACE
801261002000 per interasse 2000 5.5801261002500 per interasse 2500 6.0801261003000 per interasse 3000 6.8
STARTING GALVANIZEDBRACE
801263002000 per interasse 2000 6.0801263002500 per interasse 2500 6.9801263003000 per interasse 3000 7.7
ALUMINIUM TRANSOMFOR PLATFORM LOCKING
801650000400 400 0.50801650000800 800 0.75
GALVANIZEDLEDGER
801231001250 1250 2.5801231002000 2000 3.9801231002500 2500 4.8801231003000 3000 5.7
GALVANIZEDMOBILE LEDGER
801234000800 800 2.5801234001250 1250 3.4801234002000 2000 4.8801234002500 2500 5.7801234003000 3000 7.8
STARTING GALVANIZEDLEDGER
801233001250 1250 3.9801233002000 2000 5.4801233002500 2500 6.3801233003000 3000 7.3
GALVANIZEDSAFETY HOOK
801010000000 0.50
DOUBLE GUARDRAILIN ALUMINIUM
801250800800 800x500 1.9801251250500 1250x500 3.2801252000500 2000x500 5.0801252500500 2500x500 6.0801253000500 3000x500 6.9
ALUMINIUMLEDGER
801232001250 1250 1.2801232002000 2000 2.0801232002500 2500 2.4801232003000 3000 2.8
206
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
P.L.A.
GALVANIZED STARTING TRANSOMFOR PLATFORM 80
801610100800 800x100 2.4
GALVANIZED REINFORCED MOBILE TRANSOMFOR PLATFORM 80
801640300880 800x300 6.0
SIDE GUARDRAIL WITH TOE-BOARD 80X110IN ALUMINIUM
801351100800 800x1100 4.0
SIDE GUARDRAIL WITH TOE-BOARD 80X120FOR BRACKET IN ALUMINIUM
801351200800 800x1200 5.3
GALVANIZEDSIDE GUARDRAIL 80X50
801360800500 800x500 3.2
GALVANIZED GRAVEL GUARDWITH PLATFORM LOCKING
801552200350 350x2200 17.5
GALVANIZEDOVERHANGING BRACKET
801530400600 400x600 4.7801530800800 800x800 9.2
SIDE GUARDRAIL WITH TOE-BOARD 40X120FOR BRACKET IN ALUMINIUM
801351200400 400x1200 3.2
SIDE TOP GUARDRAIL WITH TOE-BOARD 80X120IN ALUMINIUM
801331200800 800x1200 6.0
207
Company | Projects | Products
208
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
P.L.A.
GALVANIZED PROPFOR OVERHANGING BRACKET 80X200
801530802001 800x2000 7.5
STANDARDWITH PIN IN ALUMINIUM
801310001000 1000 1.9801310002000 2000 3.5
SPIGOTLESS STANDARD 200IN ALUMINIUM
801310002001 2000 3.3
FRAME FOR CARRIAGE ENTRANCE BEAMIN ALUMINIUM
801100630801 800x630 9.6
CARRIAGE ENTRANCE BEAMIN ALUMINIUM
801710504200 4000x500 22.6801710505200 5000x500 26.0
BEAM WITH HOLESIN ALUMINIUM
801710504201 4200x500 17.0801710505201 5200x500 21.0
GALVANIZEDBEAM PLUG 40
801720000400 400 1.8
GALVANIZEDOVERHANGING SUPPORT Ø 48
800420400250 400x300x300 7.0
GALVANIZEDSTABILIZER 150X250
800712501500 1500x2500 10.0
Alum
iniu
m s
caff
oldi
ngs
209
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
ALUMINIUMPLATFORM
802120310800 800x310 4.3802120311250 1250x310 6.2802120312000 2000x310 9.1802120312500 2500x310 10.8802120313000 3000x310 12.8
GALVANIZEDPLATFORM
802110310800 800x310 6.0802110311250 1250x310 8.8802110312000 2000x310 13.0802110312500 2500x310 15.0802110313000 3000x310 20.5
PLYWOOD ANDALUMINIUM PLATFORM
802140601250 1250x620 12.1802140602000 2000x620 16.0802140602500 2500x620 19.3
ALUMINIUMPLATFORM
802120621250 1250x620 12.4802120622000 2000x620 18.2802120622500 2500x620 21.6802120623000 3000x620 25.6
GALVANIZED CONNECTION BOARD FOR BRACKET
802710221250 1250x220 6.0802710222000 2000x220 10.0802710222500 2500x220 12.0802710223000 3000x220 15.0802710082000 2000x80 4.0802710082500 2500x80 6.0
GALVANIZED CONNECTION BOARDFOR TOWER
802720122000 2000x120 7.9802720122500 2500x120 9.5
PLATFORM WITH TRAP DOOR AND LADDERIN ALUMINIUM
802320602000 2000x620 20.7802320602500 2500x620 25.4
PLATFORM WITH TRAP DOORIN PLYWOOD AND ALUMINIUM
802420602000 2000x620 20.7802420602500 2500x620 23.4802420603000 3000x620 29.3
GALVANIZEDTOE-BOARD
802510200800 800x200 2.6802510201250 1250x200 4.0802510202000 2000x200 6.0802510202500 2500x200 7.0802510203000 3000x200 8.4
210
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
P.L.A.
GALVANIZED MOBILE TRANSOMFOR PLATFORM 80
801620050800 800x50 3.5
STAIRWAY 250X200X60IN ALUMINIUM
801912002500 2500x2000x600 24.3
GALVANIZED SIDE TOE-BOARD15X20
802520200150 150x200 0.40
GALVANIZED PLATFORM SUPPORTFOR MOBILE TOWER
801740152000 2000x200 15.0801740152500 2500x200 18.2
HANDRAIL FOR STAIRWAY 250X200X60IN ALUMINIUM
801922002500 2500x2000 7.5
GALVANIZED MOBILE TRANSOMFOR TOE-BOARD 80
801630200800 800x200 2.3
GALVANIZED PLATFORM SUPPORTFOR BEAM
801730152000 2000x150 8.0801730152500 2500x150 10.0
GALVANIZED TOE-BOARDFOR PLA TOWER 250X250
802530202500 2500x2000 7.16
GALVANIZED SIDE TOE-BOARD80X20
802520200800 800x200 2.6
211
Company | Projects | Products
212
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
P.L.A.
GALVANIZEDSWIVEL COUPLER Ø 48
800230000050 ø 48 1.0
GALVANIZEDBEAM PLUG Ø 48
800350480200 200 0.5
GALVANIZEDDOUBLE COUPLER Ø 48
800210000480 ø 48 1.0
GALVANIZED COUPLER FOR SUPLEMENTARY GUARDRAIL
800221000480 ø 48 0.85
GALVANIZEDTUBE Ø 48X4
8001000020000 2000 6.68001000030000 3000 9.98001000040000 4000 13.28001000060000 6000 19.8
GALVANIZED COUPLERFOR SUPLEMENTARY LEDGERS AND BRACINGS
2080P926 ø 48 0.8
GALVANIZED COUPLERFOR SUPLEMENTARY GUARDRAIL
800223000480 ø 48 0.95
TUBE Ø 48X4IN ALUMINIUM
8001000020000 2000 3.08001000030000 3000 4.58001000040000 4000 6.08001000060000 6000 9.0
STAIRWAY LANDING 40X35IN ALUMINIUM
801930350400 400x350 4.5
Alum
iniu
m s
caff
oldi
ngs
213
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
GALVANIZED ADJUSTABLE BASE PLATEWITH COUPLER Ø 48
800330000500 500 3.0extension length 350
ADJUSTABLE WHEEL 50WITH BRAKE
800533000750 - 5.0capacity kg 300800310005001 - 6.0capacity kg 500
GALVANIZEDADJUSTABLE BASE PLATE
800310000500 500 3.0extension length 3508003100000700 700 3.5extension length 5508003100001000 1000 4.6extension length 800
GALVANIZEDHOOK ANCHORAGE Ø 48
800410000600 600 2.5800410001200 1200 5.0
GALVANIZED ADJUSTABLESWIVEL BASE JACK
800320000500 500 3.4extension length 350800320000700 700 3.9extension length 550
GALVANIZED SCREW EYEFOR ANCHORAGE
800441121200 12x120 0.18800441121600 12x160 0.23800441122300 12x230 0.27
PVC NOG14X100
800442141000 14x100 0.01min. 25 pcs.
PVC CAPFOR NOG HOLE OF 14
800443000010 tappo da 14 0.002min. 100 pcs.
GALVANIZEDBASE PLATE
800300000100 140x140x100 1.0
214
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
P.L.A.
GALVANIZED BASE HEADWITH WHEELS
800612300900 - 14.5capacity kg 230800613000900 - 12.5capacity kg 300800615000900 - 15.5capacity kg 500
GALVANIZED ADJUSTABLE BASE HEADWITH WHEELS FOR TWO FRAMES 500 KG
800625001800 - 26.2capacity kg 500
PVC CLOTHFOR RAIN PROTECTION
801823501250 1250x3500 2.15801823502000 2000x3500 3.45801823502500 2500x3500 4.3801823503000 3000x3500 5.15
GALVANIZED ADJUSTABLE BASE HEADWITH WHEELS 500 KG
800625000900 - 19.6capacity kg 500
GALVANIZEDROOF PROTECTION ELEMENT OF 265
801311002650 2650 9.2
GALVANIZEDCONTAINER
803110870980 - 24.3n. 20 frames
GALVANIZED BASE HEADWITH WHEELS FOR TWO FRAMES 500 KG
800615001800 - 25.4capacity kg 500
GALVANIZED SUPPORTFOR RAIN PROTECTION 120X290
801812901200 1200x2900 8.6
COMPLETE ANCHORAGE DEVICE, HOOK, DOUBLE COUPLER, SCREW EYE Ø 12X120 AND PVC NOG
800400000600 600 5.0800400001200 1200 7.0800400001201 1200 8.0with double coupler
Alum
iniu
m s
caff
oldi
ngs
215
TECHNICAL CHARACTERISTICS
ART. DIM. MM KG ART. DIM. MM KG ART. DIM. MM KG
Company | Projects | Products
GALVANIZEDREMOVABLE CONTAINER
803121371100 - 52.0n. 22 frames or 50 double guardrail or 45 boards of 30
GALVANIZEDCONTAINER
803131371100 - 46.0n. 22 frames or 50 double guardrail or 45 boards of 30
ASSEMBLING GUARDRAIL 125IN ALUMINIUM
801401251400 1250x1400 8.0
ASSEMBLING GUARDRAILIN ALUMINIUM
801402001400 2000x1400 11.5801402501400 2500x1400 13.0801403001400 3000x1400 14.5
ASSEMBLING GUARDRAIL 80X140IN ALUMINIUM
801400801400 800x1400 6.0