Alternative commissioning method for AspiraVision DALI ......Group the lamps according light plan....
12
April 2011 Alternative commissioning method for AspiraVision DALI drivers
Transcript of Alternative commissioning method for AspiraVision DALI ......Group the lamps according light plan....
April 2011
Alternative commissioning method for AspiraVision DALI drivers
April 2011 2
Program short-address in all drivers, via the DALI-controller*STEP: 1
* AspiraVision DALI drivers work with all DALI compliant controllers
April 2011 3
Switch-off all lamps and wait 15 minutes for lamps to cool downSTEP: 2
April 2011 4
Switch-on driver with address 0 (lowest address) and locate the lampSTEP: 3
April 2011 5
Address 0
Mark address of driver and lamp on mapSTEP: 4
April 2011 6
Switch-off driver with address 0 (lowest address)STEP: 5
April 2011 7
Switch-on driver with address 1 and locate the lamp STEP: 6
April 2011 8
Address 1
Mark address of driver and lamp on mapSTEP: 7
April 2011 9
Switch-off driver with address 1STEP: 8
April 2011 10
Address 11
Address 4 Address 9
Address 10Address 0Address 2
Address 3 Address 6 Address 7
Address 5 Address 8 Address 1
Repeat step 6-8 until all lamps are located and marked on mapSTEP: 9
April 2011 11
Group the lamps according light plan. Create scenes and required dim-levels.STEP: 10
