Slide 1

Altai Certification TrainingConfigurationProfessional ServicesAltai Technologies Limited

Altai Super WiFi#Not for Distribution Altai ConfidentialNot for Distribution Altai ConfidentialAltai Super WiFiModule OutlineAP Default SettingsA8 Basic ConfigurationsA8 Advanced Configurations5GHz Bridge Mode ConfigurationA8-A2 Bridge Mode ConfigurationA8-C1 CPE Mode ConfigurationA8-Ein/A8n ConfigurationsAltai Super WiFi#Not for Distribution Altai ConfidentialNot for Distribution Altai ConfidentialAltai Super WiFi2AP Default SettingsA8/A8-Ei/A8-i default IP address192.168.1.222255.255.255.0FW 2.2.3.101Username: altaiPassword: wag

A2/A2e default IP address192.168.1.20255.255.255.0FW 1.0.0.26Username: altaiPassword: wag

A8-Ein/A8n default IP address192.168.1.222255.255.255.0FW 1.2.0.621Username: rootPassword: superwifi123

C1 management IP address192.168.99.99255.255.255.0FW 1.0.0.19Username: altaiPassword: wag

Altai Super WiFi#Not for Distribution Altai ConfidentialNot for Distribution Altai ConfidentialAltai Super WiFi3A8 Basic ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#55Configuration CaseA8 Basic configurations:Regulatory domain: RoWDisable DHCP Client (Static IP Address)IP Address: 10.6.127.185Subnet mask: 255.255.255.0Default gateway: 10.6.127.1Wireless mode: 802.11b/g modeRadio frequency: To be determined by Channel Scan resultTransmitting power: 25dBmVAP 0 (Management and normal service VAP)SSID: WiFi_mgtSuppressed SSID: EnabledMaximum Clients: 10Wireless security: WPA-PSK + AESVAP 1 (For service only VAP)SSID: WiFi_ServiceMaximum Clients: 256Wireless security: WPA-PSK + AES

Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#56

6Tools>Channel ScanClick to start channel scanAll the clients traffic would be interrupted during the channel scan test.Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#677

Click to show Noise FloorChannel Scan SuccessTools>Channel ScanAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#78

8Key Considerations:Num of SSIDNeighbor SSIDUsageNoise levelTools>Channel ScanAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#89

9FCC (US Standard) 2.4GHz Max EIRP 36dBmETSI (European Standard) 2.4GHz Max EIRP 20dBmRoW (Rest of the world) 2.4GHz Max EIRP 60dBmSelect A8Click Save to batch the changesConfiguration>SystemAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#910

10Recommend Static IPStatic IP, subnet mask and default gateway configuration(Default IP address: 192.168.1.222)Click Save to batch the changesConfiguration>NetworkAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#1011

Configuration>2.4G Wireless AP>GeneralSelect channel:ETSI/RoW Ch1-13FCC Ch1-11Wireless mode (802.11b Max 11Mbps, 802.11b/g Max 54Mbps, 802.11g Max 54Mbps)Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#1112

Configuration>2.4G Wireless AP>SectorsMaximum Tx Power 25dBmAntenna Gain - Cable Loss + Tx Power Max EIRPAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#1213

Configuration>2.4G Wireless AP>VAP BasicSet SSIDA8 will not broadcast SSIDDefault value: 256Enabled allows traffic to pass between stations in a VAP. For mgt VAP, recommended enable. For normal service VAP, disable.Click Save to batch the changesRemark:VAP 0 usually acts as management VAP so it only allows small number of wireless clients and hidden its SSID. VAP 1 acts as normal service VAP so it sets maximum clients.Normal Service: Allow to access InternetManagement: Allow to access the A8 web interface. Only VAP 0 has this configuration.Enable VAPAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#13Inter/Intra-VAP Traffic ControlThe feature:Traffic among clients of the same SSID/VAP can be blockedTraffic among clients of different SSID/VAP can be blockedThe user benefit:Improved network securityBetter network traffic control

SSID 1

SSID 1

SSID 2

SSID 2

Inter-VAP traffic blockedIntra-VAP traffic blockedA8Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#15

Configuration>2.4G Wireless AP>VAP BasicClick Save to batch the changesRemark:VAP 0 usually acts as management VAP so it only allows small number of wireless clients and hidden its SSID. VAP 1 acts as normal service VAP so it sets maximum clients.Default: AccessCan change to TrunkAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#1516Configuration>2.4G Wireless AP>VAP Security

AuthenticationOpenShared KeyWPAWPA-PSKWPA2WPA2-PSKCipherDisableWEPWEPAES/TKIPAESKey4 KeysRADIUSPassPhraseRADIUSPassPhraseAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#16Highly SecureThe user benefit:Latest encryption and authentication supportRadio channel scanning and auto alarm for rogue APThe Altai technology:SSID suppression, inter/intra-VAP traffic blockingRogue AP detectionWPA, WPA2-PSK, 802.1x (PEAP, TLS, TTLS) authentication, MAC address filteringWEP, TKIP and AES encryptionBackup RADIUS server support

Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#18Reboot AP

Click Reboot AP to apply all changes

Click OK

Wait for 30s to reload the web pageAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#18A8 Advanced ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#2020Configuration CaseA8 configurations:Similar to basic configuration, exceptNetwork Operation Mode: GatewayLocal IP Address: 192.168.125.1/24NAT Mode: Enabled2.4GHz DHCP Snooping Trusted Port: DisabledBandwidth Control: Airtime: DL 30%, UL 30%Multicast Data Rate ControlQoS and DiffServ Tag: EnabledCongestion Avoidance: FW-REDAccess Link Safe Mode: EnabledPing Host: 10.6.127.1Ping interval: 30sAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#202121Configuration CaseVAP 0 (Management and normal service VAP)QoS Profile: Very HighVAP 1 (For normal WiFi service only)QoS Profile: ToS/802.1QVAP 2 (For surveillance camera, authenticated by RADIUS)SSID: WiFi_cameraMaximum Clients: 15QoS Profile: HighWireless security: WPA + AESPrimary RADIUS Server: 10.6.127.120RADIUS Port: 1812RADIUS secret: testAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#2122Configuration > Network>General

Enable Gateway ModeConfigure LAN port IP, subnet maskRecommended: FWRED

Configuration > Network>NATEnable NAT ModeClick Save to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#22Congestion AvoidanceThe feature:A8 can avoid congestion by dropping selected frames in the Tx queue when it is full based on one of the following mechanisms: 1) Tail Drop2) Random Early Drop (RED)3) Fair Weighted Random Early Drop (FWRED) (Altai patent pending)The user benefit:Avoid congestion due to a few problem clientsHigher average throughput for the majority

A8Tx queue is FULLTail drop all last incoming packets will be droppedRED most frequently occurred client packets will be droppedFWRED highest airtime usage client packets will be droppedAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#24

Configuration > 2.4G Wireless AP>GeneralClick Save to batch the changes2.4GHz (unselected by default)Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#2425

Configuration > 2.4G Wireless AP>GeneralClick Save to batch the changesEthernet (Trusted by default)5GHz (Optional)2.4GHz (Optional)Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#2526Client4Client3 (DHCP Server)Client2 (DHCP Server)DHCP Snooping Trusted PortA8-1A8-2Client15G2.4G2.4G2.4G2.4GDHCP ServerSuppose A8 is in switch mode, all clients should get IP address from ethernet DHCP server, to avoid getting from clients DHCP server, need to disable two A8s 2.4GHz trusted port and A8-1s 5GHz trusted port.Ethernetxxxxxx means untrusted interfaceBy default, Ethernet is trusted portAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#26Bandwidth Control on Airtime/ThroughputThe operation:2 modes of control - Throughput (in kbps) or Airtime (in % of occupancy)Bandwidth limit can be set per VPA/client/uplink/downlink for both modesAirtime control can prevent the low data rate (11b) clients from occupying too much airtime (throughput mode cannot solve this problem)

Airtime controlled to 5% per stationThroughput controlled to 250 Kbps per stationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#28

Configuration > 2.4G Wireless AP>Bandwidth ControlEnabled ThroughputVAP: Total bandwidth for one SSIDStation: Total bandwidth for each wireless clientSet value to specify the maximum bandwidthAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#2829

Configuration > 2.4G Wireless AP>Bandwidth Control

Enabled Airtime Set airtime value, default setting is 5%. Used to limit the use time of low data rate user.

Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#29Bandwidth Control Example

Using the airtime bandwidth control feature with VAP set to 15% and Station set to 5%, the congestion problem was totally resolved. CPE client ping time improved from 3000 ms to 50 msThere are many low speed free WiFi users dragging down the performance of premium WiFi usersBEFOREAFTER3000 ms response time50 ms response timeAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#31

Configuration > 2.4G Wireless AP>GeneralEnabled Multicast TrafficChoose Multicast Data Rate.Enabled IGMP Snooping

Recommended low multicast data rate and IGMP snooping enabledClick Save to batch the changes

Protection Mode (Auto)When 11b only client exists, protection mode is automatically enabled to use protection rate for either CTS or RTS-CTS packet.Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#31Multicast Traffic FilterThe feature:A8 can be set to drop all multicast trafficA8 can be set to limit multicast traffic to certain data rateThe user benefit:Limit unnecessary multicast trafficImprove bandwidth utilization

SourceMulticast packets at high data rateMulticast packets can be limited to lower data rateAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#IGMP SnoopingThe feature:Multicast traffic from a client in one SSID will only broadcast to the clients within that multicast group of the same SSIDThe user benefit:Reduce multicast storm and unnecessary trafficImprove bandwidth utilization

SSID 1SSID 3SSID 2SourceMulticast packets

SSID 1SSID 3SSID 2SourceWith IGMP snooping, multicast packets will only be transmitted to the registered clients under the same SSIDWithout IGMP snooping, multicast packets will be transmitted to all clients across all SSIDsA8IGMP: Internet Group Management ProtocolAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#34

Configuration > Network>Backhaul Link IntegrityEnable access link safe modeA8 pings to 10.6.127.1 for every other 30s.If ping request timeout for 3 times, it reboots and enters safe mode with SSID: SafeMode.Click Save to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#34Highly ResilientThe user benefit:Complete backhaul protectionMission critical proofImprove network stabilitySaves downtime costThe Altai technology:Link Integrity check link status from client up to the application serversBackhaul Link Self Healing automatic backhaul failover and recoveryAccess redundancy clients are at least covered by 2 or more A8Access Link Safe Mode automatic reboot with new SSID forcing client to release

Multiple coverage by A8A8A2

Resilient Backhaul ArchitectureBackhaul link self healingAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#36

Configuration > Network>QoSEnabling QoS adds traffic priority tag in the packets.DiffServ Tagging is effective after enabling QoS. ToS field of IP packets will be changed based on QoS policy configuration.

QoS Profile:Very High, High, Normal, Low, ToS/802.1Q, IPToS/802.1Q changes the tag basing on the packet typeIP changes the tag basing on the port range and protocolClick Save to batch the changesEnabled QoS and DiffServAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#3637

Configuration > 2.4G Wireless AP>VAP BasicEnable VAP2Set SSIDSet 15 clientsHigh QoSClick Save to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#3738

Configuration > 2.4G Wireless AP>VAP SecuritySelect WPAClick UpdateSelect AESEnter RADIUS Server informationClick Save to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#385GHz Bridge ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#40Bridge CombinationsA8-A2 802.11a Mode Maximum Data Rate: 54 MbpsA2-A2 802.11na HT40 ext ch +1/-1 Maximum Data Rate: 300 MbpsA8-A8 802.11a Turbo + Bursting Mode + Fast Mode Maximum Data Rate: 108 Mbps

Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#40A8-A2 5GHz Bridge ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#4242Sample Solution Layout

A8-A2 BridgeAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#42424243435GHz Bridge

A8 for large outdoor coverageA2: 450 m LOSUp to 1km LOSA2 for coverage & capacity enhancementAccessBridge: a backhaul link at 5GHz signal (802.11a)Example Configurations:A2 setups 5GHz bridge with A8 5GHz MAC addressEnable 802.11aChannel 56Enable AES (Recommended bridge security)A8 setups 5GHz bridge with A2 5GHz MAC addressEnable 802.11aChannel 56Enable AESAll configurations on both sides must be the same, except MAC address2km

Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#434343

Rogue AP DetectionAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Rogue AP DetectionThe feature:Neighboring APs information is obtained by the channel scan functionThe scanned neighboring AP list will be validated against the defined legitimate AP list (BSSID with MAC address info, SSID)Rogue AP is declared if the validation with the legitimate AP list failsThe user benefit:Reduce security threats to the networkAuto alert & reporting with the use of AWMSUseful tool for deployment

Rogue APCheck against legitimate AP list in A8Legitimate AP list

A8 is scheduled to perform channel scan

Reporting through AWMS or remote accessAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#46

46A8: Status > OverviewA8 5GHz MAC addressRemark: The backside of AP unit also has 5GHz MAC addressAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#4647

A2: Configuration > 5G Radio1. Select 802.11a mode2. Click Update3. Select Frequency4. Type in Bridge Distance5. A8 5GHz radio MAC address6. Select AES7. Type in Key8. Click Update Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#47

A8: Configuration>5G Wireless Bridge1. Select 802.11a mode2. Click Save3. Select Frequency4. Type in Bridge DistanceClick Save to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#48

A8: Configuration>5G Wireless Bridge>Remote Bridge5. Type in A2 5GHz radio MAC address and click Add to List

A8: Configuration>5G Wireless Bridge>Security6. Select AES7. Type in KeyClick Save to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#4950

A8: Status > 5G Wireless BridgeStateUp: associatedInactive: disconnectedAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#5051

A8: Status > 5G Wireless BridgeMaximum Data Rate11a mode: 54MbpsAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#51A2-A2 5GHz Bridge ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#53535GHz BridgeA2 for small area coverage & capacity enhancement

A2: 450 m LOSA2: 450m LOSAccessBridge: a backhaul link at 5GHz signal (802.11a)Example Configurations:A2 setups 5GHz bridge with A2 5GHz MAC addressEnable 802.11na HT40ext ch+1Channel 36Enable AES (Recommended bridge security)A2 setups 5GHz bridge with A2 5GHz MAC addressEnable 802.11na HT40ext ch+1Channel 36Enable AESAll configurations on both sides must be the same, except MAC address2km

Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#53535354Wireless modes: 802.11a - Max 54Mbps 802.11na HT20 - Max 130Mbps802.11na HT40ext ch+1 - Max 300Mbps802.11na HT40ext ch-1 - Max 300Mbps

A2: Configuration > 5G Radio2. Click Update3. Select Frequency4. Type in Bridge Distance5. A2 5GHz radio MAC address6. Select AES7. Type in Key8. Click Update 1. Select 11na HT40ext ch + 1Different channel setsAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#54A8-A8 5GHz Bridge ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#56Up to 1km LOS

A8 for large outdoor coverageAccess565GHz BridgeBridge: a backhaul link at 5GHz signal (802.11a Turbo Mode)Example Configurations:A8 setups 5GHz bridge with A8 5GHz MAC addressEnable 802.11a Turbo Mode +Bursting Mode + Fast ModeChannel 56Enable AES (Recommended bridge security)A8 setups 5GHz bridge with A2 5GHz MAC addressEnable 802.11a Turbo Mode +Bursting Mode + Fast ModeChannel 56Enable AESAll configurations on both sides must be the same, except MAC address2km

Up to 1km LOSAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#56565657

A8: Configuration>5G Wireless Bridge>General1. Select Turbo mode2. Click Save3. Select Frequency4. Type in Bridge Distance

5. Enable Bursting and Fast FrameClick Save to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#5758A8: Configuration>5G Wireless Bridge>Remote Bridge5. Type in A8 5GHz radio MAC address and click Add to List

A8: Configuration>5G Wireless Bridge>Security6. Select AES7. Type in KeyClick Save to batch the changes

Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#58C1 CPE ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#60A8 Configurations:VAP1SSID: A8_CPEMaximum Clients: 256Wireless security: OpenC1 Configurations:CPE Mode: also named station modeVAP 0Connect to A8_CPEWireless security: Open

Configuration CaseAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#6061

A8 ConfigurationsSet SSIDSet VAP SecurityAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#6162C1 ConfigurationsConfiguration>2.4GHz Radio

Enable Station ModeClick Edit to modify VAP configAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#6263

C1 ConfigurationsConfiguration>2.4GHz Radio>VAP 0Enable VAP0Click Scan to scan available SSID Click Edit to set security config, the same with A8Only connect to a particular AP with the specific MAC. Usefull when SSIDs are the same.Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#6364

Choose one SSID C1 ConfigurationsRSSI level Channel Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#6465

A8:Status>2.4G Wireless AP>Association ListC1 is connected to A8Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#65A8-Ein/A8n ConfigurationsAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

A8-Ein:Configuration>Network>GeneralRecommend Static IPStatic IP, subnet mask and default gateway configuration(Default IP address: 192.168.1.222)Click Submit to batch the changesAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#A8-Ein:Tools>Channel Scan

Click to start channel scanAll the clients traffic would be interrupted during the channel scan test.Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#A8-Ein:Tools>Channel Scan

Noise FloorChannel Scan SuccessAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

Configuration>Wireless>Radio0>GeneralWireless mode (802.11b, 802.11b/g, 802.11g, 802.11n, 802.11ng)Channel SelectionAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio0>Superwifi

Sector StateRange OptimizationAuto, 0~800m, 200~1000m, 400~1200mAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

Configuration>Wireless>Radio0>WLANEdit SSIDAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

Configuration>Wireless>Radio0>WLAN>WLAN GeneralWill not broadcast SSIDSet SSIDEnabled allows traffic to pass between stations in a VAP. For mgt VAP, recommended enable. For normal service VAP, disable.Default value: 512Access Traffic Right: Full Access or Management Only/DisableAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

Configuration>Wireless>Radio0>WLAN>WLAN SecurityAuthenticationOpenShared KeyWPAWPA-PSKWPA2WPA2-PSKWAPIWAPI-PSKCipherDisableWEPWEPAES/TKIPAESSMS4Key4 KeysRADIUSPassphraseRADIUSPassphraseASPassphraseAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio0>WLAN>QoS

Enable DSCP to WMM MappingDifferent Value is different priority levelAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio0>WLAN>Bandwidth Control

Bandwidth Control for Total WLANBandwidth Control for Each StationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Save and Apply

Click Submit to apply all changes

Click Save & Apply or Unsaved Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#A8-Ein/A8n & A8-Ein/A8n 5GHz Bridge ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

Configuration>Wireless>Radio1>GeneralEnable RadioRadio Mode as APWireless Mode and ChannelDisable Inter-WLAN ForwardingAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio1>WLAN

Edit WLANAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#WLAN General Configuration

Enable WLANEnable VLAN Pass ThroughSSID Name for the Bridge

Hide SSIDAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#WLAN Security Configuration

Authentication Mode as WPA2-PSKPassphraseAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

Configuration>Wireless>Radio1>General (Remote)Enable RadioRadio Mode as StationTransmit PowerAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio1>WLAN (Remote)

EditAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio1>WLAN>WLAN General (Remote)

SSID and Target BSSIDAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio1>WLAN>WLAN Security (Remote)

Authentication Mode and Pass PhraseAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Connection status

Connection StatusSSID NameStatus>Interface>Radio1>Association ListAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#A8-Ein/A8n & A2 5GHz Bridge ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#When the A8-Ein and A2n make the Bridge, the A2n 5Ghz wireless should be as AP mode, and the A8-Ein 5Ghz wireless should be as Station mode, then it will pass through the VLAN.Notice

A2nA8-EinAP ModeStation Mode5Ghz Wireless BridgeAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>5G Radio

Radio Operational as AP modeWireless ModeChannel SelectionEdit VAPAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#VAP Configuration

State as UpSSID of VAPHide SSIDDisable Intra-VAP ForwardingEnable VLAN Trunk PortEdit Security ConfigurationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Security Configuration

Authentication Mode as WPA2-PSKPassphraseAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Configuration>Wireless>Radio>WLAN (Remote)

Edit WLANAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

5GHz Radio Configuration (Remote)Enable WLANThe SSID is 5GHz radio SSID from the master APThe BSSID is MAC address of the 5GHz radio from the master APAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#WLAN Security Configuration(Remote)

Authentication mode as WAP2-PSK,Passphrase should match with the master AP Altai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#

Connection statusRSSI InformationAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#Thank YouAltai Super WiFiNot for Distribution Altai ConfidentialAltai Super WiFi#97