ALLNET 4duino Sensor Farbsensor TCS3200
2
Art.-Nr.: 111929 Herst.-Nr.: ALL-A-53 (C49) ALLNET 4duino Sensor Farbsensor TCS3200 EAN CODE 4038816024183 4duino TCS3200 color sensor (TCS230 upgrade) A-53 (C49) verview Sensor Chip: TCS3200 (RGB color detector) Detects static color, the output is a square wave with frequency directly proportional to incident light intensity Supports fill-light by onboard LEDs Specifications Power: 2.7V ~ 5.5V Ideal detection distance: 10mm Dimension: 36.0mm * 20.6mm Mounting holes size: 2.0mm Applications Sorting by color Ambient light sensing and calibration Test strip reading Color matching How to Use In the case of working with a MCU: VCC : 2.7V ~ 5.5V GND : power supply ground LED : MCU.IO (controlling the 4 white LEDs) OUT : MCU.IO (RGB color output frequency) S0/S1 : MCU.IO (Output frequency scaling selection inputs) S2/S3 : MCU.IO (Photodiode type selection inputs) S0/S1 selects the output frequency scaling factor, S2/S3 selects the color filter of red, green, blue, then OUT ALLNET GmbH - Maistraße 2 - 82110 Germering - [email protected] - 089 / 894 222 22 Irrtümer und Änderungen vorbehalten. Seite 1/2
Transcript of ALLNET 4duino Sensor Farbsensor TCS3200
Art.-Nr.: 111929Herst.-Nr.: ALL-A-53 (C49)
ALLNET 4duino Sensor Farbsensor TCS3200
EAN CODE
4 0 3 8 8 1 6 0 2 4 1 8 3
4duino TCS3200 color sensor (TCS230 upgrade)
A-53 (C49)
verview
Sensor Chip: TCS3200 (RGB color detector) Detects static color, the output is a square wave with frequencydirectly proportional to incident light intensity Supports fill-light by onboard LEDs
Specifications
Power: 2.7V ~ 5.5V Ideal detection distance: 10mm Dimension: 36.0mm * 20.6mm Mounting holes size: 2.0mm
Applications
Sorting by color Ambient light sensing and calibration Test strip reading Color matching
How to Use
In the case of working with a MCU:
VCC : 2.7V ~ 5.5V GND : power supply ground LED : MCU.IO (controlling the 4 white LEDs) OUT : MCU.IO(RGB color output frequency) S0/S1 : MCU.IO (Output frequency scaling selection inputs) S2/S3 : MCU.IO(Photodiode type selection inputs)
S0/S1 selects the output frequency scaling factor, S2/S3 selects the color filter of red, green, blue, then OUT
ALLNET GmbH - Maistraße 2 - 82110 Germering - [email protected] - 089 / 894 222 22Irrtümer und Änderungen vorbehalten.
Seite 1/2
Art.-Nr.: 111929Herst.-Nr.: ALL-A-53 (C49)
outputs a square wave with frequency proportional to the selected color intensity. The detected color can bedetermined by the ratio of the intensity of red, green and blue.
Note:
Avoids environment light noise White balance is required when the first time using the module, reseting themodule, or changing the light source Lieferumfang
Weight: 0.01 kg
Color Sensor × 1 4-pin custom connector jumper wire × 2
----
Powered by TCPDF (www.tcpdf.org)
ALLNET GmbH - Maistraße 2 - 82110 Germering - [email protected] - 089 / 894 222 22Irrtümer und Änderungen vorbehalten.
Seite 2/2
