All Custom Aluminum Portfilio 2012

download All Custom Aluminum Portfilio 2012

of 68

  • date post

    04-Dec-2014
  • Category

    Documents

  • view

    112
  • download

    2

Embed Size (px)

Transcript of All Custom Aluminum Portfilio 2012

2012 Portfolio of ServicesPool Enclosures Screen Rooms Sunrooms Awnings Builders of quality specialty structures

Pool Enclosures Screen Rooms Sunrooms Awnings

ABOUT USSelection Quality Service Value Selection Quality Service

All Custom Aluminum is a family owned and operated business established in 1995 by Ray Herron and his two sons, Andray, and Chris. Ray Herron has more than 25 years of experience in the aluminum and specialty structure business, while both Andray and Chris have more than 15 years experience. Together we offer over 50 years of combined experience designing and building aluminum structures, and it shows. It shows in our selection. We deal with manufacturers and distributors throughout the Southeast to provide our customers with a wide array of products to choose from. It shows in our quality. Everything we build is covered by our top to bottom warranty. Our fabrication techniques eliminate unsightly clips and brackets while increasing overall strength. It shows in our service. If youve ever thought true service was a thing of the past, think again! All Custom has never forgotten that personalized customer service is what each customer deserves. It shows in our value. We custom design each structure to fit your needs free of charge. And the savings over typical wood frame additions will leave you with valuable piece of mind.Selection Quality Service Value Selection Quality Service

allcustomaluminum.com

What do we build?

If its made of metal, we can build it

The Question is ...

What Dont we build

POOL ENCLOSURES

BUILT FROM SCRATCH TO FIT YOUR EXACT SPECIFICATIONS BUILT TO LAST AND BACKED UP WITH OUR TOP TO BOTTOM WARRANTY CHOOSE FROM MANY STYLES AND OPTIONS OUR QUALITY WORKMANSHIP MAKES THE DIFFERENCE

Its

ALL

Nobody builds a house around a pool enclosure. If they did, we could offer a one size fits all enclosure for every customer. The truth is, each home, each pool, is different. Thats why All Custom offers a full spectrum of design options, all of them custom built to fit your space. Let our experts go to work for you to design and build your dream room. No leaves, no bugs, no hassles!

GABLESGable: A roof design where two sections pitched at the same angle meet at a point in the center of the span

Quick FactsCan rise from 4 to 8 feet from low point to high point Include one central connection at the peak Gables require symmetrical foundations and thus fit better on rectangular or square slabs Can be constructed freestanding, attached, or in combination with our aluminum solid roof products

Gable Hips:This roof style incorporates a raised central peak area with a hip at each end angling down to a wall which remains level all the way around

Traditionally, gables have been pitched at 17 degrees. However, we adjust the angle upward to 20 degrees or more to provide for just the right amount of pitch

Gable hips are the most economical raised roof pool enclosure design available. The horizontal wall makes the design streamlined and low profile

Here you can see the hip end of the gable and how it angles down to the end wall. The angle from the peak to the wall is roughly 35 degrees

This is a view of the hip end of the gable from the side. The screen in these panels is slightly curved as it is drawn taut between the frame

This design has four angled corners, which soften the look of the hip.

Bring the outdoors... In!

Selection

Quality

Service

Value

Selection

Quality

True Gables This design incorporates a raised central peak area that is preserved all the way to the end wall on each side.

Though not right in every circumstance, true gable enclosures are a stylish and attractive alternative to a gable hip, at a similar cost.

All Custom Aluminum uses only the finest materials available. We do not use discount or factory second aluminum, not once, not ever

True gable end walls rise up to a central point which is level with the main peak. These walls will typically rise to 12 or more depending on the starting height. The angle can vary from 17 to 30 degrees

MANSARDSMansard: A roof design composed of three pieces where the two outer pieces rise at 30 degrees to a central, raised flat area.

Generally rise about 4 to 5 feet from low point

to high point Include one connection at each high point Because the raised area of a mansard roof sits level, it is generally more adaptable to atypically shaped foundations Can be constructed freestanding, attached, or in combination with our aluminum solid roof products Provides greater interior volume than gable Tends not to frame area under central peak

Selection

Quality

Service

Value

Selection

Quality

Engineered up to150 mph wind loads Includes 7 structural super gutter All pool enclosures covered under our 5 year warranty

What about the leaves?Pine StrawIf you have an abundance of pine trees near your pool you should consider upgrading to a smaller mesh screen in the roof to prevent the majority of the pine needles from protruding through the screen. You can choose from a variety of alternatives including 20X20 mesh and Bettervue increased visibility mesh screening .

All Custom Aluminum

Design Quality Integrity Style Convenience

Take Your VacationFun Family Home Enjoyment Lifestyle Interact OutdoorsExcept under extreme circumstances, most pool enclosures , even mansards, will remain free of leaves. All you need is a breeze and the air circulating through the room does the job.

Low Maintenance Practicality

Warranty Service

All Custom Aluminum

Without Leaving HomeEscape Entertain Relax At Home Together Peaceful Children

.com

Play where you Stay

HALF MANSARDSHalf Mansard: A roof design which projects horizontally, usually from a high fascia, before sloping at 30 degrees to an end wall.

Quick Facts Will maintain level configuration for the

majority of the span before dropping 3 to 4 feet to a low point Adaptable to atypically shaped foundations Usually utilized to reduce height where enclosure is emanating from an upper story fascia Provides greater interior volume than gable Tends not to frame area under central peak Utilizes a single connection at the downleg

Half Mansards are a more economical way to deal with un usually high fascias because they dont project above the starting point of the room

COMBO ROOMSCombo: Any roof style pool or screen enclosure which also incorporates some element of solid roof area in its design.

Quick Facts

Height of roof can vary depending on features Have the virtue of being adaptable to many foundation shapes Add a custom touch for that one of a kind look Can be constructed freestanding, attached, or in combination with our aluminum solid roof products Can be a lower cost alternative to costly wood frame constructed additions

Dont throw your money away paying a General Contractor to construct your awning, solid roof porch, or pool house, let All Custom do it all, and save. The secret is in our composite panel roof systems. For a fraction the cost of wood, we can provide a 110-150 mph rated solid roof product that keeps water out of your room, while keeping more of your hard earned money in your pocket.

Versatile and very attractive Can be constructed in just a few days Adds protected space to any screen enclosure Energy Star rebate

eligible Provides solid cover inside or out Insulated to protect against the heat Strong enough to walk on

Our 7 by 5 inch structural gutter makes it possible

Most pool decks require only one Interior post for support

HYBRID ROOFSHybrid: a roof design which combines elements of two or more different roof styles, or multiple versions of one roof style.

Height of roof can vary depending on features Have the virtue of being adaptable to many foundation shapes Add a custom touch for that one of a kind look Can be constructed freestanding, attached, or in combination with our aluminum solid roof products Generally, though not always, are somewhat more costly than other designs

The possibilities really are endless. You can let your imagination run wild

Oftentimes people think, and build, outside the box. At All Custom, we welcome those challenges. Many of our hybrid designs are one of a kind solutions to otherwise intractable problems. Pulling off one of these jobs without a hitch is more than just knowing the math, it takes craftsmen who know their trade in and out. We at All Custom take special pride in the craftsmanship that goes into these designs.

Any enclosure is only asgood as the craftsmen who build it

Customized designs for hard to fit spaces Can free span up to 55 feet Built to last a lifetime

Where Function meetsTurn corners, change shape, while still retaining a raised roof Let All Custom design it for you Constructed to withstand up to 150 MPH wind loads

Style

Since 1995

State of the

ARTtheres an art to building a custom pool enclosure(706) 761-5363allcustomaluminum.com

If the pool deck is not rectangular, or includes extra patio space , it may be necessary to delineate the smaller space from the main roof area by utilizing a flat section. This option preserves the look of the main roof area.

Flat Sections and Transom WallsThe thing about pool enclosures is, unlike most conventional construction techniques, the structural elements that support the room also define it. So anything that breaks up the orderly arrangement of supports, such as a projection or uneven fascia, c