AL TAMMAN INDSIL FERROCHROME LLC

(FZC)

FREE ZONE SOHAR SULTANATE OF OMAN

Al TAMMAN INDSIL FERROCHROME LLC (FZC)

• Al Tamman Indsil Ferrochrome LLC (FZC), is a 50:50 JV between Muscat Overseas Group, Oman and Indsil Group of India.

• Has setup Oman’s first Ferro Chrome smelter in 2013, at Sohar Free zone (SFZ) with a rated capacity of 75,000 ton per annum.

• Oman is a major exporter of Chromite Ore, accounting for 10% of the total world production of this mineral. Abundant mid-grade Chromite Ore deposits, coupled with availability of cheap energy and proximity to Sohar port makes this venture ideally positioned to showcase the capability of Oman as a leading supplier of Ferrochrome.

Al TAMMAN INDSIL FERROCHROME LLC (FZC)

The group stands out globally for its product quality and pioneering efforts in process technology for specialty alloys. The captive power generation facilities at Kerala and Chattisgarh make the respective smelters in these Locations, internationally, one of the most cost competitive units. This in turn has helped the group position itself as a key low cost, high quality supplier in the global low carbon silico manganese industry.

The Group has Four Decades of Business Excellence and acumen. Rooted in Oman; Diversified operations in Middle East & Africa Over the past glorious years and concurrently with the country’s economic and infra-structural growth, the group has widened its horizons and expanded its operations across various sectors in Oman and other countries.

AL TAMMAN INDSIL FERRO CHROME LLC (FZC) HISTORY

BRIEF HISTORY: 1. Project launch 2011. 2. Preliminary Environment permit issued on 16-04-2012 3. First Furnace trial runs commenced June 2012. 4. Full commercial production commenced out of one furnace by July

2013. Second furnace by October 2013. 5. Full production capacity achieved during January 2014

2011 2012 2013

LOCATION

• The operational facilities are located at Free Zone Sohar which is at a distance of around 250 km from capital city Muscat, Sultanate of Oman.

• The nearest port is ,Sohar Port which is 5 kms away from the facility • The nearest airport is located 10km from Free Zone Sohar • The Site is well connected by Expressways and roads

Route Map Plant Location`

MAJOR PRODUCTION FACILITIES

The production facilities are spread over an area of 150,000 square meters consisting of :

Submerged arc furnaces, with latest technology for electrode columns. - 2 no's, each of 24 MVA rating

Gas cleaning plant each of 2,40,000 m3 capacity to handle the flue gases. The gases are filtered through polyester filter bags to achieve a Suspended particulate matter(SPM) of less than 10 mg/Nm3 – 2Nos.

Briquetting plant of 30 tph capacity for production of chrome ore briquettes

MAJOR PRODUCTION FACILITIES -2

• Single phase transformers – 3 no's of 8 MVA each ,for each furnace • Dedicated cranes (35/10 t capacity) and crane bays for each furnace- 2nos

• Raw material handling facilities- one for each furnace of 50tph capacity. – 2Nos.

• A complete set of auxiliary power supply system for operation of the furnaces and

other equipment.

• Around 10,000 square meter of covered area for storage of raw material and finished products

Product handling system which can handle around 200tpd of crushing, screening and packing of the finished products

Crushing and Jigging facilities for separation of metal from the slag – 30 tph

PRODUCTION PROCESS

Chrome ore Pellets Quartz Coke Briquettes

Tapping

Sizing Packing Crushing

Containerized

QUALITY CONTROL

• Professional team of personnel , responsible for assuring quality of the incoming ,in process and finished products to and from the furnaces on 24*7 basis. The laboratory is equipped with necessary equipment for carrying out analysis on chemical as well as instrumental

• Responsible for the handling of finished goods after tapping , sizing ,packing & before dispatch to customer

• Monitor the air ,water quality on a day to day to basis to achieve the desired standards set by the Ministry of Environment and Climatic affairs, Sultanate of Oman

• Co-ordinate with third party assayers for final sampling, analysis and dispatch based on customer requirement

PRODUCTS CR SI C P S SIZE

FERRO CHROME 60-62% 3- 4% MAX 8% MAX 0.03% MAX 0.05% MAX 10-100mm (90% MIN)

FERRO CHROME 57-60% 4% MAX 8% MAX 0.03% MAX 0.05% MAX 10-100mm (90% MIN)

FERRO CHROME 54-57% 4% MAX 8% MAX 0.03% MAX 0.05% MAX 10-100mm (90% MIN)

FERRO CHROME - Fines

50-55% 5% MAX 8% MAX 0.03% MAX 0.05% MAX -10mm (90% MIN)

PRODUCTS AND SPECIFICATION

The products can be supplied in 1 MT HDPE Jumbo bags or bulk in containers. The products can be sized as per customer requirement

CUSTOMERS

ORGANISATIONAL STRUCTURE

CHAIRMAN

MANAGING DIRECTOR

HEAD- OPERATIONS

HEAD- PROJECT HEAD- PRODUCTION

HEAD -MECHANICAL

HEAD- ELECTRICAL

HEAD- BRIQUETTING Head- QC

Head- HR

HEAD- PROCURMENT

HEAD - MARKETING HEAD - FINANCE

CONTACT

Oman Head Office : P O Box 592, PC 131, Al Hamriya Sultanate of Oman Phone : +968- 26943929,Fax: +968- 24793229 Plant : Plot No 3490, Free Zone Sohar Phone : +968- 26947200 Email : raju@atifoman.com India INDSIL HOUSE T.V.Samy Road (West), R.S.Puram Coimbatore – 641002, Phone: +91-422-4522922 Fax : +91-422-4522925 Email : nagaraju@indsil.com

mailto:raju@atifoman.com

AL TAMMAN INDSIL FERROCHROME LLC (FZC)

THANK YOU

AL TAMMAN INDSIL FERROCHROME LLC (FZC)Slide Number 2Slide Number 3Slide Number 4Slide Number 5Slide Number 6Slide Number 7Slide Number 8Slide Number 9Slide Number 10Slide Number 11Slide Number 12CONTACT AL TAMMAN INDSIL FERROCHROME LLC (FZC)