8/2/2019 AL-237

1/3

Technical data sheetEdition 1, 2010Aliva-237

1/3Aliva-237

Alivaeuiment

Al iva-237

Concrete Spraying Machine

Description The Aliva-237 is a sturdy concrete spraying machine for wet and dry sprayingprocess.

Uses Thanks to its variable output, the Aliva-237 can be used for small jobs, such as jointfilling, as well as for extensive slope consolidation work.

The Aliva-237 is available in the following versions:

n STANDARDElectric drive, single speed

n TOPElectric drive, with FC for variable rotor speed

n AIRWith air drive, variable rotor speed

Technical data

With chassisDimensions

Length LSTANDARD / AIR 1229 mmTOP 1229 mm

Width 718 mm

Height Hwith rotor 0,7 + 2,0 L 980 mmwith rotor 3,6 L 1050 mmwith rotor 5,6 L 1130 mm

WeightSTANDARD / AIR approx. 320 kgTOP approx. 450 kg

Content of hopper 40 liters

Authorized Distributor:

Thiessen Team USA1840 Sharps Access RdElko, NV 89801Ph: (775) 777-1205 Fax: (775) 777-1215

www.thiessenteam.com

8/2/2019 AL-237

2/3

2/3Aliva-237

Drive Electric (STANDARD / TOP)

Motor output 2,2 kWSpeed range

STANDARD 50Hz1500 rpm60Hz1800 rpm

TOP 7001800 rpmVoltages

STANDARD 380-415 V 50 Hz400/440 V 60 Hz

TOP 380-480 V 50/60 HzProtection IP 55 / IP 65 (FC)

With air motor (AIR)

Only 4th

Quarter 2010 available

Conveying (only dry)

Conveying output *m/hRotorL

Hose mm

STANDARD TOP

max. grainmm

max. conveyingdistance (m)

horizontal / vertical

0,7 32 0,4 0,2-0,5 6

2,0 32 + 38 1,1 0,6-1,4 12

3,6 32 + 38 2,0 1,1-2,5 12

5,6 50 3,2 1,7-4,0 16

150/60 m**

* with theoretical filling degree of 100%,if motor with 60 Hz = 20% higherconveying capacity.

** more than 80 m conveying distance, use steel tubes.

Theoretical conveying

Air consumption Nm/min. ***

Dry spraying

Hose mm

60 m 120 m

32 3 4

38 5 6

50 8 10

*** Air consumption data areapproximate values and aredepending on conveyingoutput, conveying distanceand hose diameter.

Caution:For the configuration AIR (withair motor) it has to beconsidered:Total air consumption =

Air consumption forconveying + Air consumptionfor air motor!

1 Nm3/min = 35 cfm

Theoretical airconsumption

Safety instructions

Important safetyregulations

For the safe, correct operating of the unit please consult the current machineoperating manual. Sika Schweiz AG cannot accept any liability for injury ordamages caused by improper use, incorrect or inadequate operation, maintenanceor repairs.

8/2/2019 AL-237

3/3

3/3Aliva-237

Alivaeuiment

Legal references

Information given, in particular suggestions made for use and application ofour products are based on our current knowledge and experience in the normalcase at the time of printing. In practice, the difference in materials, substrates andenviromental conditions can cause deviation from this information.Sika guarantees for its products the compliance of technical characteristicsaccording to the Technical Data Sheets up to expiry of shelf life. Users of theproducts must always consult the latest edition of Technical Data Sheet underwww.sika.com. Our current General Conditions are applicable.

Aliva-237 TOP

Sika Schweiz AGAliva equipmentTffenwies 16CH-8048 Zrich

Phone +41 58 436 40 40Fax. +41 58 636 41 40www.sika.comaliva_equipment@ch.sika.com

http://www.sika.com/http://www.sika.com/mailto:aliva_equipment@ch.sika.commailto:aliva_equipment@ch.sika.comhttp://www.sika.com/http://www.sika.com/