AirGuard™ 3e–523S–1...3e–523S–1 Portable Adaptive Com-Link The 3e–523S–1, also called...
Transcript of AirGuard™ 3e–523S–1...3e–523S–1 Portable Adaptive Com-Link The 3e–523S–1, also called...
AirGuard™ 3e–523S–1
Portable Adaptive Com-Link
The 3e–523S–1, also called the Portable Adaptive Com-Link (PAC-Link), is an extremely portable, battery operated IP router used in mobile operations. The 3e–523S–1 is intended to provide mobile IP connectivity for personnel on the move when the RF signal strength can not be maintained to the base operations center. When the RF signal is disrupted, a 3e–523S–1 can be used as a repeater which when situated in a suitable location, will provide suitable RF signal strength between the personnel and the base operations center.
Multiple 3e–523S–1 units can provide secure communications between personnel and the base operations center when large structures are penetrated or around the perimeter of large objects by simply tying the 3e–523S–1 units to railings or other convenient tie points as the progress of personnel takes them beyond the signal range of the last 3e–523S–1 that was deployed. In this way, connectivity can be maintained between personnel and the base operations center.
Inside the 3e–523S–1 is the FIPS 140-2 Validated™ 3e–523–F2 multi-function wireless data module. Also included is a rechargeable lithium-ion battery with a battery charge of approximately eight hours.
The 3e–523S–1 supports three different operating modes:
• Wireless Access Point (WAP)
• Wireless Client (STA), and
• Wireless Bridge (WDS)
The 3e–523S–1 can be configured for FIPS or non-FIPS submode.
In addition, the 3e–523S–1 supports 802.11i and Wi-Fi Protected Access 2 (WPA2), WPA and different EAP types. Temporal Key Integrity Protocol (TKIP) for WPA encryption and Advanced Encryption Standard (AES) for WPA2 encryption.
With support of 802.11a/b/g standards, the 3e–523S–1 delivers up to 54 Mbps of data rate in 5 GHz and 2.4 GHz bands.
Secure Reliable Interoperable AffordableWireless for a Hostile World™
3e-523S–1 contains the FIPS 140-2 Validated™ 3e-523-F2 data module
Benefits• Battery-Powered
Wireless Indoor/Outdoor Mesh, Access Point, Bridge, Client
• Self configuring, self-healing MESH network
• Simple deployment with mesh backhaul
• 802.11a/b/g, Super G & Turbo A up to 108 Mbps
• Detects & reports rogue APs
• AES-CCMP / WPA2 / 802.11i Encryption & Authentication
• Wireless client load balancing
• MAC address filtering
• Compatible with most Wi-Fi infrastructure products
Well DeckVehicle Decks
AviationMedical
LivingSpace
LivingSpace
LivingSpace
Stores
FoodService
Electronics
Machinery SpacesBallast Tanks
Certificate #726
AirGuard™ 3e–523S–1 Portable Adaptive Com-Link
Hardware Specification• FIPS 140-2 Validated™ 3e-523-F2 data
module – CPU: XScale IXP 420 @ 533 MHz – 16 MB flash – 64 MB SDRAM
External Ports• One 10 / 100 Mbps WAN Ethernet port • One DB-9 RS-232 port• One external antenna port
LED Indicators• FIPS Mode• LAN / WLAN Activity
Environment & Safety• Operating Temperature: -10º ~ +50º C standard; • Storage Temperature: - 40°~ +60° C• Operating Humidity: 0~80% non-condensing
LAN Ethernet Setting• Supports 10 / 100 Mbps full / half duplex
with auto negotiation• Fixed IP• DHCP client
Wireless Features• Multiple RFs — 802.11a/b/g for AP and bridge with
Turbo A and Super G• Operation modes (user configurable) — Access point — Bridge — Client (client-bridge) — Mesh• Self-forming, self-configuring, self-
organizing mesh • Channel number — Fixed or automatic select (optimum)• Adjustable transmit power• Transmit power control• Load balancing of wilreless clients• PPPoE support• Security: - WEP – 64-, 128-, and 152-bit - WPA-PSK - WPA (802.1x) - Dynamic Key - WPA2 / 802.11i - AES-CCMP
- MAC address filtering - Rogue wireless AP detection with
email notification• 3eTI layer 2 discovering protocol• Layer 2 isolation for hotspot
Device Management• Web Server / HTTPS • SNMP agent• SNMP trap
Receive Sensitivity• 802.11a: -88dB@6Mbps, -71dB@54Mbps• 802.11b: -95dB@1Mbps, -90dB@11Mbps• 802.11g: -90dB@6Mbps, -74dB@54Mbps
Output Power• 802.11a: 17dBm@6Mbps,
13dBm@54Mbps • 802.11b: 18dBm• 802.11g: 18dBm@6Mbps
15dBm@54Mbps
Tools and Utilities• Ping utility • Trace route utility • Firmware upgrade via web • Reboot device • Factory default • NTP (Network Time Protocol)
Battery• 10.8V lithium battery with charge Indicator
(Battery life is approximately eight hours)• External battery charger included
Options• Reduced operational mode set• Custom MIBs available
3e Technologies International, Inc. (Headquarters)9715 Key West Avenue, Suite 500Rockville, Maryland 20850 USAPhone: +1 301-670-6779Fax: +1 301-670-6989www.3eti.com
3e Technologies International, Inc.15F No. 957 JungJeng RoadJunghe City, Taipei Taiwan 235 R.O.CPhone: +886 2-2228-6599Fax: +886 2-2228-6598
Copyright © 2007 by 3e Technologies International, Inc. All Rights Reserved. All trademarks are the property of their respective owners. AirGuard™ is a trademark of 3e Technologies International, Inc.
FIPS 140-2 Validated™: A Certification Mark of NIST, which does not imply product endorsement by NIST, the U.S. or Canadian government. Certain features listed may have restricted availability and / or
subject to change without notice. Please confirm material features when placing orders. This product contains components, software, and / or firmware exported from the United States in accordance with U.
S. export administration regulations. Diversion contrary to U.S. law is prohibited. Customers are responsible for verifying all applicable regulatory approvals for use in their country and / or the country of
final shipment or use.
Printer
3e-523S-1
Wireless Mesh/Bridge Network
EnterpriseNetwork
RADIUS/Security Server
SD
4 5 6 7 8 9 1 0 11
10/1 00 BA SE TX
1 2
3
54 11 Ent erp ris eS wit ch
P OW E R
M G MT
4 5 6 7 8 9 10 11 1
1
2
2
3
3
3
3
3R
R
10 00B AS EX
A MB ER =
G RE EN =FLA SH ING G RE EN =
AC TI VIT Y
LI NK OKDI SA BLE D
EthernetSwitch
Username ___Password ___
WirelessLaptops
3e-523S-13e-523S-1
Wireless Mesh/Bridge Modes
Client–Bridge Mode
Wireless AP Mode
29000376-001 D
Flexible Deployment Models