AIRBUS A380 Cut-Out - Wing · PDF fileAIRBUS A380 Cut-Out 1. Carefullycutoutbodyfuselage...
1
3. Fold tail piece along dotted lines - centre fold first (downward), followed by lower tails (upward). FLYING TIPS • Hold plane behind wings and glide in a straight line. • Improved performance can be gained through slight adjustment of wings and tail. • Longer flying distances can be achieved by attaching a paper clip to the aircraft nose. D C A B 6. Straighten out wings and tail plane until level. Fold engines vertically down and winglets up. 2. Fold main body of plane along centre fold line. 45° angle A.G.- 8050-13 CAUTION Do not throw at people, animals or breakable objects. AIRBUS A380 Cut-Out 1. Carefully cut out body fuselage and tail piece along thick black lines, including the tail and fuselage slots. CUT TAIL SLOTS FOLD ➚ FOLD FOLD FOLD FOLD CUT SLOT ➚ ➚ ✃ ✃ FOLD 5. Fold flat parts A , B and C between the two sides of the plane (printed side out). Insert tab D into corresponding slot. Main body of plane should now be flat. A B C D 4. Whilst holding tail piece flat between finger and thumb, gently insert at a 45°angle into corresponding tail slots on fuselage body. Firmly pull up and back.
Transcript of AIRBUS A380 Cut-Out - Wing · PDF fileAIRBUS A380 Cut-Out 1. Carefullycutoutbodyfuselage...
3. Fold tail piece along dotted lines -centre fold first (downward),
followed by lower tails (upward).
FLYING TIPS
• Hold plane behind wings and glide in astraight line.
• Improved performance can be gainedthrough slight adjustment of wings and tail.
• Longer flying distances can be achieved byattaching a paper clip to the aircraft nose.
D
C
A
B
6. Straighten out wings and tail planeuntil level. Fold engines vertically
down and winglets up.
2. Fold main body of plane alongcentre fold line.
45°angle
A.G
.-80
50-1
3
CAUTION Do not throw at people, animals or breakable objects.
AIRBUS A380Cut-Out1. Carefully cut out body fuselageand tail piece along thick black
lines, including the tail and
fuselage slots.
CUTTAIL
SLOTS
FOLD
�
FOLD
FOLD
FOLD
FOLD
CUT
SLOT�
��
�
FOLD
5. Fold flat parts A , B and C between
the two sides of the plane (printed side
out). Insert tab D into corresponding slot.
Main body of plane should now be flat.
A B C
D
4. Whilst holding tail piece flat betweenfinger and thumb, gently insert at a
45°angle into corresponding tail slots on
fuselage body. Firmly pull up and back.
![SinGAPORE AIRLInES A380* 456 ! A380] 333 A380 E 1531 …singapore airlines a380* 456 ! a380] 333 a380 e 1531 a330 [1-2-1 singapore airlines](https://static.fdocuments.net/doc/165x107/5f1f304da44bc1238e46c157/singapore-airlines-a380-456-a380-333-a380-e-1531-singapore-airlines-a380-456.jpg)
