Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions · Air Thahiti Nui AIRBUS A340-300...
16
Front Over look Side Underside Air Thahiti Nui AIRBUS A340-300 Completed Model (Total length) About 575mm (Scale - About 1:120) (Total width) About 510mm Pattern 18 pages Assembly Instructions 16 pages This model was designed for Papercraft and may differ from the original in some respects. *Bulid the model by carefully reading the Assembly Instractions, in the parts sheet page order. This Air Tahiti Nui AIRBUS A340-300 is a model based on the AIRBUS A340-300 airplane which connects Tahiti and Tokyo's Narita airport, from the French Polynesian airline Air Tahiti Nui. The tail is decorated with a picture of a pure white Tiare flower, the national flower of Tahiti, and each plane is named after one of Tahiti's islands, with names such as "The Bora Bora." Onboard, flight attendants welcome passengers with the wonderful hospitality Tahitian people are known for. The AIRBUS A340-300 measures 63.7m in length, with a wingspan of 60.3m and a height of 16.91m. It has a maximum weight of 275.0 tons, and a flight distance of 10,400km. Assembly Process Attach the parts in order. A1~Q3 No. of Parts *Glue, scissors and other tools may be dangrous to young children so be sure to keep them out of the reach of young children. Assembly Tip Small pieces will be easier to cut out if you fold along the lines first. Cut them out after you have folded them. Before gluing each piece, be sure to compare its shape to the corresponding surface to ensure it is the correct piece. Folds & Marks Glue spot Tools Trace along the folds with a ruler and a used pen (no ink) to get a sharper, easier fold. Mountain fold line Valley fold line Cut out Assemble in the direction indicated by the arrow Each glue spot has a mark indicating how to attach it. Glue to the rear of the other part Glue to the front of the other part Glue within the same part Glue the rear of this part Scissors, glue (We recommend craft glue), ruler, tweezer, stencil pen, used pen (no ink). PAGE01 Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
Transcript of Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions · Air Thahiti Nui AIRBUS A340-300...
Front Over look
Side Underside
Air Thahiti Nui AIRBUS A340-300
Completed Model (Total length) About 575mm (Scale - About 1:120) (Total width) About 510mmPattern 18 pagesAssembly Instructions 16 pages
This model was designed for Papercraft and may differ from the original in some respects.*Bulid the model by carefully reading the Assembly Instractions, in the parts sheet page order.
This Air Tahiti Nui AIRBUS A340-300 is a model based on the AIRBUS A340-300 airplane which connects Tahiti and Tokyo's Narita airport, from the French Polynesian airline Air Tahiti Nui. The tail is decorated with a picture of a pure white Tiare flower, the national flower of Tahiti, and each plane is named after one of Tahiti's islands, with names such as "The Bora Bora." Onboard, flight attendants welcome passengers with the wonderful hospitality Tahitian people are known for.
The AIRBUS A340-300 measures 63.7m in length, with a wingspan of 60.3m and a height of 16.91m. It has a maximum weight of 275.0 tons, and a flight distance of 10,400km.
Assembly ProcessAttach the parts in order.
A1~Q3 No. of Parts*Glue, scissors and other tools may be dangrous to young children so be sure to keep them out of the reach of young children.
Assembly TipSmall pieces will be easier to cut out if you fold along the lines first.Cut them out after you have folded them.
Before gluing each piece, be sure to compare its shape to the corresponding surface to ensure it is the correct piece.
Folds & Marks Glue spot ToolsTrace along the folds with a ruler and a used pen (no ink) to get a sharper, easier fold.
Mountain fold line
Valley fold line
Cut out
Assemble in the direction indicated by the arrow
Each glue spot has a mark indicating how to attach it.
Glue to the rear of the other part
Glue to the front of the other part
Glue within the same part
Glue the rear of this part
Scissors, glue (We recommend craft glue), ruler, tweezer, stencil pen, used pen (no ink).
PAGE01
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
A1 A2 A3 A4
A5 A6
A7
A8
M4
M5
M3
If making an in-flight model
A9
A9
A9
A10
A10
A10
A13
M7
M7
M8
M8
M6
M6
If making a grounded model
2. Choose whether to make a grounded model or in-flight model.
Cut out the parts indicated in red before use
PAGE02
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
If making a grounded model If making an in-flight model Choose whether to make a grounded model or in-flight model.
Cut out the parts indicated in red before use
C9
D3
D3D4
D3
D4
D4
A11
B3
A12
C5
C6 C8
C7
B1 B2 M9
M11
M10
PAGE03
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
M1
M2
J6
J5
J3
J4
J2
J1
L3
L4
L6
L5
J3
L3
If making a grounded model, cut out the parts indicated in red before use
PAGE04
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
J7
J7
G25
G24G23 G20
G21 G22
G17
G18 G19
G16G15
G14
K1
If making a grounded model, cut out the parts indicated in red before use
PAGE05
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
H1
H3
H4
H5
H6H10
H11
H12
H7
H2
H9
H8
I2
F15
F11F12
F13
F3
F4
F5
F6
F7
F10F9
F8
F14
PAGE06
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
Parts made during step 9Parts made during step 10
If making a grounded model
If making an in-flight model
Parts made during step 6Parts J1-J6
Parts made during step 6Parts J1-J6
K1
K4
H13
H14
J7
J7
I3
PAGE07
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
If making a grounded model, cut out the parts indicated in red before use
I6
I6
G37
G36G35 G29
G30G31
G32
G33G34
G28G27
G26
L1
PAGE08
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
H15
H17
H18
H19
H20 H24
H25
H26
H21
H16
H22
H23
I1
G13
G12 G6
G10
G1
G2
G7
G3
G4
G5
G9G8
G11
PAGE09
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
I4
I6
I6
L1
H28H27
K3
Parts made during step 17
Parts made during step 16
If making a grounded model
If making an in-flight model
Parts made during step 6Parts L3-L6 M1 M2
Parts made during step 6Parts L3-L6 M1 M2
PAGE10
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
C1
I5
K2
L2
N1
N2
N3
N4N5
N6
C2C3
D1
D2
PAGE11
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
C4
N7
N8
N9
N10
N12N11
D5 D6
D7
D8
E11
E2
E1
PAGE12
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
D9
D10
E8
E9 E10
E3
E4E5
O2O3O4
N13
N15N14
O1
Top
Bottom
PAGE13
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
F2
F1E6
E7
O9 O11O10
O15 O16 O17 O18 O19
O6
O5
O8
O7
O12O14O13
O20 O21 O22 O23 O24
Carry out this step if making a grounded model
PAGE14
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
O40
O41
O42
O43 O44 O45
O25
O26
O27
O28
O29
O30
O30
O33
O33,
O34
O34O101
O101
O100
O100,
O31
O31
O32
O32
O25
O26
O27
O28
O29
O36
O36
O37
O37
O39
O39
O35
O35
O38
O38
Carry out this step if making a grounded model Carry out this step if making a grounded model
Carry out this step if making a grounded model Carry out this step if making a grounded model Make 10 pieces of parts 040-087.
Parts made during step 31
Parts made during step 31
Parts made during step 31 Parts made
during step 31
Parts made during step 31
Parts made during step 31
Parts made during step 31
Parts made during step 31
Parts made during step 31
Parts made during step 31
Side viewFront view Side view Front view
Side view
PAGE15
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
P1
P2
P3
P4
P5
Q1
Q2
Q3
P6
A15
I8
I7
I9
I10
A14
Attach the parts made during steps 30, 32, 33, and 34 first. Then, attach the other parts.
Carry out this step if making a grounded model
Parts made during step 30
Parts made during step 32
Parts made during step 33 Parts made during step 34
PAGE16
Air Thahiti Nui AIRBUS A340-300 : Assembly Instructions
