Air handling systems new
-
Upload
ceutics1315 -
Category
Documents
-
view
364 -
download
0
Transcript of Air handling systems new
Mallareddy college of Pharmacy
AIR HANDLING SYSTEMS
guided by: Presented By Dr. Satyabrata Bhanja Aslesha.E
M.Pharmacy 1st yr
AIR HANDLING SYSTEMS
CONTENTS
HVAC systems Air handling units Air filteration systems Dust collectors Humidity and temperature control
HVAC systems
Heating Ventilation and Air Conditioning systems are the integral part of environmental control system design.
Basic components of HVAC:1. Air Handling Unit2. Air distribution
Dust network Insulator Dampers/valves Return lower & grills.
3. Air filters
Air Handling Unit AHU is a device used to condition and
circulate air as part of a heating ventilating and air-conditioning (HVAC) system.
It is a large metal box containing a blower, heating or cooling elements, filter racks or chambers, humidity & temperature control loops.
Air Handling Unit
Temperature and humidity control
Temperatures in the 68-74 F (19-23 C) range is comfortable for working environment.
Temperature control is important in the areas where autoclaves, ovens, dry heat strerilization tunnels are present.
Humidity comfort levels are in the 45-55% RH range.
Air dryers can be used to maintain lower than normal humidity levels.
AIR FILTERATION SYSTEMS
CONTENTS
Introduction Types of filteration Mechanisms of filteration Types of air filters
Introduction
Filteration is an important aspect of environmental control in Pharmaceutical industry.
The main aim of filteration is to produce dust free atmosphere.
It is required in areas like spray drying, coating, granulating, milling, packaging etc.
Filters are selected based on the required environment.
Mechanisms of air filteration
Air filteration involves the removal of unwanted particles due to collision of particles with the filter.
Such removal of particles due to collisions are governed by forces called as
a) Impingementb) Diffusionc) Interception
Mechanisms of air filteration
Impingement It is also called as Inertial impaction.
Particle inertia causes it to leave the flow streamlines and impact on the fiber. This is called as spraining effect.
This is not suitable for particles of size <5 microns.
Mechanisms of air filteration
Diffusion This is also known as Brownian Movement
resulting in the movement of particles from molecular collisions.
Efficient method for particles of size <1 microns.
Mechanisms of air filteration
Interception The particle/droplet collides to the one of the
filter’s fibre after coming close enough to it.
Oil metal plates/mesh are used. Affects the particles above 4 microns.
Air filter efficiency
Air filter efficiency is
Maximum – impingement in low velocity diffusion at high velocities
Minimum – impingement in high velocity diffusion at low velocities
Air filters
Air filters are made up of fibre glass, sinter glass, charcoal, glass wool, dry fabric, oil wetting fabric.
Arrangement: sandwichflatdiskpleatedbox
Purpose: final filterpost filterfine filterintermediate filter
Types of air filters
1. Ultra low penetration and high efficiency particulate air filters (ULPA & HEPA)
2. Packed towers3. Membrane filter catridges4. Hydrophobic filters
HEPA FILTER
HEPA is an acronym for “High Efficiency Particulate Air”
This type of air filter can remove at least 99.97% of dust, pollen, mold, bacteria and any airborne particles with a size of 0.3 micrometres (μm)
HEPA FILTER Media is the filtering material.
Eg: glass fiber, synthetic fiber, non-woven fiber Sealant is the adhesive material that creates a
leak-proof seal between the filter media and the frame.
Frame is where the filter media is inserted.Eg: aluminum, stainless steel, plastic or wood.
Faceguard is a screen attached to the filter to protect the filter media during handling and installation.
Gasket is a rubber or sponge like material used to prevent air leaks between the filter and its housing by compressing the two together.
HEPA FILTER
Construction: HEPA filter is constructed of borosilicate
microfibres in the form of pleated sheet Sheet is pleated to increase the overall
filtration surface area. The pleats are separated by serrated
aluminum baffles or stitched fabric ribbons, which direct airflow through the filter
This combination of pleated sheets and baffles acts as filtration medium.
HEPA FILTER
It is installed into an outer frame made of fire-rated particle board, aluminum, or stainless steel
The frame-media junctions are permanently glued or ‘‘pot-sealed’’ to ensure a leak proof
HEPA FILTER
HEPA filter performance is dependent upon th following characteristics:
Air flow Temperature Pollutant loading Dust holding capacity Filter media Contruction of HEPA Operating conditions etc.
Testing of HEPA filters There are 2 separate tests for HEPA and ULPA filter
collection efficies. HEPA efficeincy is rated using a thermal di octyl
phthalate (DOP) test. The test dust for HEPA filters is mono-sized, DOP particles, generated by vapourization and condensation. Photometer measures particle penetration by sensing the scattered light.
ULPA efficiency is tested using a particle counter upstream & downstream of filter. Automizer injects DOP,alcohol & mineral oil in hexane to generate particles.
Mono disperse particles
Poly disperse particles
Types of air filters
2.Packed towers
Packed towers are custom designed to provide removal efficiencies in the range of 95% to 99% for acid and toxic gases with a low pressure drop
Types of air filters
3. Membrane filter catridgesoThese are compact, easily handled and can be manufactured as fully disposal form.oThese are available as either pre filter (particulate and liquid aerosal) or sterilizing filter (bacterial contaminents).
Types of air filters
4. Hydrophobic filters These are generally used as vent filters. They protect the contents of the containers
against contamination in the air which enters or leaves them.
Dust collectors
Dust collectors are used for equipment maintanance.
Air pollution is controlled.
Main features Low cost & maintainance Most commonly used for all type of medium
from coarse to fine except <5 microns particles.
Collection efficiency of 10 to 100 microns with multiclones.
Dust collectors
Types of dust collectors
1) Dry mechanical collectors2) Wet collectors & scrubbers3) Fabric collectors4) ESP
Types of dust collectors
1.Electrostatic precipitators(ESP)Mechanism: Ionizing the gas Charging the dust particles Transporting the particles to the collecting
tube Neutralizing the dust particles Removing the dust from the collecting
surface
ESP
TYPESi. Cottrell or single stage – combines
ionization and collection in a single stageii. Penny or Two stage – ionization and
collection in different stages
Advantages: Large gas volumes & high collection
efficiency for small particles.Disadvantages: This is a costly method
ESP
Dust collectors
2.Fabric collectors
Collection mechanism: Impaction Interception Diffusion
Advantages: can handle varying exhaust gas flow rates
& particle loading
Fabric collectors
The amount of filter area depends on:
Release characteristics of dust Porosity of dust cake Conc. Of dust in carrier gas stream Type of fabric & surface Airflow patternn within the collector Temperature & humidity within the gas
stream
Fabric collectors
Dust collectors
3. Wet collectorsCollection mechanism: Collect the droplets Contact particles with water or another
liquid
Advantages: Can handle high temperature & moisture Dust which represent explosion or fire
hazards in the dry form can be wetted and collected
Wet collectors
Types: Spray dryer Packed towers Wet centrifugal collectors Wet dynamic precipitator Venturi type Orifice type
Dust collectors
4. Dry centrifugal collectors
Collection efficiency is influenced by size, shape, weight of the particles Conc. Of dust & inlet velocityTypes Gravity seperators Inertial seperators Cyclone collectors High efficiency centrifugals
Cyclone filter
Inspecting the air handling plant
1. Verification of design documentation, including description of installation and functions specification of the requirements
2. Operating procedures
3. Maintenance instructions
4. Maintenance records
5. Training logs
6. Environmental records
7. Walking around the plant
Conclusion
Air handling systems:
Play a major role in the quality of pharmaceuticals
Must be designed properly, by professionals
Must be treated as a critical system
References
L.Lachman, The theory and practice of industrial pharmacy
Bentleys textbook of pharmaceutics Dust collectors – learning guide for
dust collectors [Internet] Handbook of heating, ventilation &
air-conditioning.