AIR Accessories Mounting HW 3 Sector Clamp Kit
of 2
Transcript of AIR Accessories Mounting HW 3 Sector Clamp Kit
-
Nuts M10 => Torque MA = 40 Nm
Torque MA = 25 Nm
Torque MA = 25 Nm
Torque MA = 7 Nm
Torque MA = 7 Nm
1)
1)
1)
1)
Nuts M10 => Torque MA = 40 Nm
1)Attention!Do not remove the self-locking nut.For the azimuth adjustment range loosen only the self-locking nut (one or two rotations) and afterwards tighten it with a torque MA = 40 Nm.2)All M10 nuts have the same AF 17.
low
er c
lam
p(20
)(40
)upp
er c
lam
p
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973www.kathrein.de
936.
4397
/a
Sub
ject to
alter
ation
.AIR AccessoriesMounting Hardware3 Sector Clamp Kit
Type No. 85010073 85010074Name AIR 3 Sector Clamp Kit AIR 3 Sector Clamp KitSuitable for mast diameter 114.3 mm 139.7 mmAntenna mast distance F 173 mm 168 mmNumber of pieces 1 x lower 3 sector clamp
1 x upper 3 sector clamp2 x mounting support clamp
1 x lower 3 sector clamp1 x upper 3 sector clamp2 x mounting support clamp
Material AIR 3 Sector Clamp Mounting support clamp Screws Nuts
Hot-dip galvanized steelAluminium
Hot-dip galvanized steel/Stainless steel
Hot-dip galvanized steelAluminium
Hot-dip galvanized steel/Stainless steel
Weight 10.2 kg 10.2 kg
Clamp
Type No. A B C D E F (0) G H85010073 453 mm 74 mm 94 mm 114.3 mm 110 mm 173 mm 396 mm 3085010074 466 mm 74 mm 94 mm 139.7 mm 110 mm 168 mm 409 mm 30
Please note: Kathrein does not recommend to use counter nuts.
85010073, 85010074 Page 1 of 2
D
F
H
G
A
E
(40)C
upper clamp
D
(20)B
lower clamp
-
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973www.kathrein.de
936.
4397
/a
Sub
ject to
alter
ation
.
Mounting InstructionsClamps85010073, 85010074
Page 2 of 2 85010073, 85010074
First installation Replacement of antenna
3)
4)
3)
4)
3) upper clamp4) lower clamp
