AIC SAS 6G Expander Firmware update procedure 6G SAS Expander... · AIC SAS 6G Expander Firmware...
Transcript of AIC SAS 6G Expander Firmware update procedure 6G SAS Expander... · AIC SAS 6G Expander Firmware...
AIC SAS 6G Expander Firmware update procedure Sep-22nd-2011
To understand AIC SAS 6G expander series product Expander firmware version from
FW0.6.1.9 to FW 0.6.2.1 (V060201-20118041643) and 307 MFG updating procedures
Please select right FW and MFG file carefully for AIC SAS 6G expander products SAS 6G
expander FW and FANs for AIC JBOD/Server configuration tables list
Item PHY/FAN No. 6.2.1 Firmware
Name MFG file Name AIC products
1 28P /0FAN v060201-20118041643.fw std6G_2U12_2x28x0FANV01000307.mfg
RSC-2EG2 12x
3.5”HDD Server
Chassis
2 28P /0FAN v060201-20118041643.fw std6G_3U16_2x28x0FANV01000307.mfg
RSC-3EG2 16X
3.5”HDD Server
Chassis
3 28P/ 2FAN v060201-20118041643.fw std6G_2U12_2x28x2FANV01000307.mfg XJ3000-2123 2U12x
3.5” HDD JBOD
4 28P/3FAN v060201-20118041643.fw std6G_3U16_2x28x3FANV01000307.mfg XJ3000-3163 3U16X
3.5” HDD JBOD
5 36P/0FAN v060201-20118041643.fw std6G_2U24_2x36x0FANV01000307.mfg
RSC-2AG 2U24x 2.5”
HDD Server
Chassis
6 36P/0FAN v060201-20118041643.fw std6G_4U24_2x36x0FANV01000307.mfg RSC-4EG2 4U24X 3.5”
HDD Server Chassis
7 36P/2FAN v060201-20118041643.fw std6G_2U24_2x36x2FANV01000307.mfg XJ3000-2242 2U24X
2.5” HDD JBOD
8 36P/3FAN v060201-20118041643.fw std6G_4U24_2x36x3FANV01000307.mfg XJ3000-4243 4U24X
3.5” HDD JBOD
Firmware update operation
1] Connect the specific serial cable (RS-232C) with expander board
2] Connect the serial cable with PC
3] Start Hyper Terminal. In order to use Hyper Terminal via 6G Expander, please choose
Bits per second to “38400”, Data bits to “8” Parity to “None”, Stop bits to “1” and Flow
control to “None”
Check current firmware version by typing the “rev” command.
3-1] Download the new firmware to Expander board.
Please transfer the new firmware from terminal soft by XMODEM protocol. Type the
command “fdl e0 0”. Click on “Transfer” tab, and choose “Send File”, a Send File pop-up
will open.
Choose the firmware file as below “v060201-20118041643.fw”
After the firmware is downloaded, type “reset” to reset expander without power cycling.
Then type “rev” again, to double check the up-to-date firmware.
3-2] Download MFG file.
Download the MFG by typing the command “fdl 83 0”. Then click on “Transfer” tab and
choose “Send File”, a Send File pop-up will open.
Please transfer the new MFG file from terminal soft by XMODEM protocol. Select the
correct MFG file. (Every 6G JBOD has different MFG file)
After the MFG file is downloaded, the MFG version will be displayed “01.00.03.07”. Please
type the command “reset” to restart the expander without power cycling.