Ahmed Gamil

Ahmed gamil abd-El-khaleQ

- 6st ataah - EL lasalky_ Alharam-Male, Married, Egyptian, -Military service accomplished.-Birth date: April-1st 1988Mob NO: --01064393353-0235647433

Mail: Ahmedgamil679@Gmail.com

Education BSC of Science - Helwan University -Special chemistry (2009) Grade : good BECHTEL APROVAL Certified BGAS-CSWIP painting inspector grade 2/3 Event code ATC88 Customer No.: 683785 Exam Date: 25/12/2015

LanguagesArabic Mother tongueEnglish V. Good Command (write, read and speak)Computer skillsMs-Word &Ms- Excel and Internet Skill

QualificationEl gammal paint school as training level 1Certificates OCIA and AWGCertified BGAS-CSWIPBECHTEL APROVAL

Painting:1. Currently working as a Quality Control Inspector (Painting/Coating) for 5 year from October -2009 in sales and Quality Control Department in Heavy Engineering

Ahmed GamilIndustries

Technical SkillsPainting / coating inspection of steel structural works, pipeline, pressure vessels, offshore vessels, new building & repairing ships.

Responsible for stage wise painting / coating inspection.

Undertake QC painting / coating activities in the work place for daily basis.

Monitor weather condition for surface preparation and painting / coating application.

Hot dip galvanizing coating inspection in galvanizing plant.

To check and monitor all painting / coating related works and ensure all final products meet in accordance with company procedure, client requirement and international codes.

Responsible for incoming coating / painting material inspection and has to ensure whether these materials suits to meets the requirements of project specifications.

Prepare all necessary QA / QC painting / coating documents and handed over to clients review.

To undertake test qualifications for spray painters, brush painter's hydro blasters & abrasive blasters.Co-ordinate with the paint manufacturer technical representative.

Job Responsibility Provide assurance of the quality of the paint application.

Provide unbiased reports and a third party paint inspection.

Verify that all surfaces are in suitable conditions for painting.

Report all surface defects to QA/QC manger at the prep stage, intermediate coat and final finish.

Notify the consultant and owner of any anomalies or irregularities in the specifications.

Execute Painting / coating inspection work as per company / project inspection test plan.

Surface acceptance and substrate testing for painting.

Review all areas in scope of work with paint contractor prior to prep and paint application.

Assure caulking where necessary has been completed satisfactorily.

Typed reports on defects to consultant and/or owner.

Designate a mock-up area for each step in the painting process.

Testing of material for improper thinning.

Acquire color and material draw downs for consultant.

Ahmed Gamil Prepare "inspection & test plan" (ITP) for specific project / company requirements/ surface

preparation and painting / coating procedure

Good knowledge of all international surface standards, painting /coating application standards inspection standards contracts, specification, material technical data sheet, material safety data sheet documentation …etc.

QUALITY & SAFETY RESPONSIBILITIES :

Follow and maintain Company standards of Quality in accordance with Company Quality System requirements.

Maintain standards of safety and comply with Company's Health, Safety and Environment Management System requirements.

Take reasonable care of own health and safety and that of others in the workplace.

Work HistoryFebruary.2010 up to July 2010 (in Egypt )Company: El gammal co.Position: chemistry (Painting and galvanization car)

September 9. 2010up to April 2013 ( in Algeria)Company: Orascom Construction IndustryProject: Sorfret fertilizer plant - AlgeriaClient: Orascom Construction Industry&sonatrach&AWGPosition: QA/ QC Engineer (Painting insulation )

April 2013 up to June 2013: ( in Egypt)

Company: Orascom Construction IndustryProject: Marrasy Sidi Abdel RahmanClient: Orascom & EmaarPosition: QA/QC Engineer (Painting insulation HVAC )

Ahmed Gamil

June 2013 up to july 2014 : ( in Jubail ) (kingdom of Saudi Arabia)

Company: technical contracting company (tcc) Project: Marafiq project (power&water utility company) Client: MARAFIQ Position: QA/ QC Engineer (Painting&insulation)

july 2014 up to December 2014 : ( in Jubail ) (kingdom of Saudi Arabia)

Company: technical contracting company (tcc)Project: KING ABDULLAH SPORT CITY Client: Hundai engineer contracting company& El seif engineer contracting company& SAUDI ARAMCOPosition: QA/ QC Engineer (Painting&insulation)

December 2014up to Aug2015: ( in Jubail ) (kingdom of Saudi Arabia)

Company: technical contracting company (tcc)Project: Marafiq project (power&water utility company)Client: MARAFIQ Position: QA/ QC Engineer (Painting&insulation)

Oct- 2015 up to July 2016 (in Egypt )

Ahmed GamilCompany International (Akzonoble )Project ERC Refinery Project Sup contractor Aresco and GS Engineering & Construction CorpPosition Technical service Company International (Akzonoble )Project 5000125 EG1018, Beni Suef 5000126 EG1020, New CapitalClient SIEMENSSup contractor Aresco and FAIST Position Technical service

july- 2016 up to now (in Egypt )

Company Intertek Project West Nile Delta Gas Development Client BECHTEL& British Petroleum   Sup contractor National Steel Fabrication (NSF) Position QA/ QC Engineer (Painting& insulation)

Ahmed Gamil

Ahmed Gamil

Ahmed Gamil

Ahmed Gamil