2003 – 2006 - Finished high school stage (95% final result) ‘’ El ABSIA SECONDARY SCHOOL’’.

2006 – 2011- Bachelor of Science (B.Sc.), ‘’Mechanical Power Department’’, Alexandria University, Egypt,

Total Grade – Good, Final 4th year - very good, Grade of project - excellent.

2013 – till now –‘’ Master student (design) ‘’ at faculty of engineering Alexandria University, Egypt.

2010 - Training course at New Horizons ‘’ AutoCAD 2010 ’’.

2011 - Training course at Knowledge academy ‘’ OSHA Construction standard ’’.

2012 - Training course at integral (Management & Quality Solutions) ‘’ Alignment ’’.

2012 - Training course at integral (Management & Quality Solutions) ‘’ work shop lubrication & bearing

failure ’’.

2012 - Training course at integral (Management & Quality Solutions) ‘’ Problem Solving ’’.

2012 - Online Training course at Cyanodaya India ‘’ Centrifugal Pump troubleshooting and overhaul ’’.

2012 - Online Training course at Cyanodaya India ‘’ Hydraulics – principles & circuits ’’.

2012 - Online Training course at Cyanodaya India ‘’ Gears - overhauls ’’.

2012 -Training course by SKF office in Egypt ‘’ SKF - Bearings ’’.

2013 - Training course at EHS-ACADEMY ‘’ OSHA 30-Hr General Industry ’’.

2013 - Training course at Arab Academy for Science & Technology and Maritime Transport ‘’ EXCEL 2010 ’’.

2013 -Training course at Arab Academy for Science & Technology and Maritime Transport ‘’ AutoCAD 2012 ’’

2013 - Training course at SGS ‘’ ISO / TS ’’

2013 -Training course at Solving International Middle East in Izmit, Turkey ‘’ Quality of maintenance ’’

2014 - Training course at Piero Pirelli Institute MILAN, Italy ‘’ EARLY EQUIPMENT MANAGEMENT’’

2014 - Training Course at Festo Egypt '' pneumatic circuits and troubleshooting ''

2014 - Training course at Pirelli '' Poss system''

2015 - Training course at Piero Pirelli Institute MILAN, Italy ‘’ influencing and persuading ‘’

2015 -Training course at EXXONMOBIL ‘’ oil & Grease ’’

2015 -Training course at Pirelli ‘’ DuPont - Excellence in Safety Project’’

2015 - Preparation course at Amideast ‘’ PMP ’’

2016 – Training course at Beyti factory '' GMP ''

Arabic – First language English – V.Good

Mechanical Maintenance Engineer

Lead maintenance technicians and junior engineers to achieve my departments targets.

Following up maintenance breakdowns daily.

Responsible of maintenance and repair works for all machines in department.

Following up the PM plan and the maintenance works by Setting the Preventive maintenance plan, based

on machine documentation and personal experience, involving periodical replacement of parts, general

checks…etc., and assuring that the plan is applied regularly.

Preparing the set-up and calibration plans and records for all machines and following their application.

Studying and controlling the machine spare parts requirements and placing the order for minimum stock

and any emergency requirements, and following the purchase sequence until they arrive in the company

store.

Preparing all documents, certificates, and records for ISO 9001 or ISO TS 16949 , ISO 14000 and VDA and

presenting them during audition.

Working inventory of spare parts, and makes all the required purchasing requisitions for machines and

related equipment’s using SAP system.

Optimizing & controlling maintenance cost, increasing efficiency of machines.

Responsible for all the improvements and modifications in my department to the machines to improve the

productivity and quality of our products.

Preparing Availability and reliability monthly report including (BD% , N#BD / MC , MTBF , MDT , Availability

% / mc).

Preparing analysis report for major problems by using (8D problem solving report and A3 Report)

Working with quality team in monthly defect analysis report by using quality maintenance system

approach.

Have a very good experience in machining & welding.

Following up the predictive maintenance plan (check alignment & thermal analysis & vibration analysis&

oil analysis)

Ability to drive performance and KPI & OPI metrics.

Lead investment projects, capacity increase projects and improvement projects in my department.

Full knowledge about (BSC – Balanced score card , OEE , machine availability and reliability , Quality

maintenance system , OPL , Microsoft office , 8D problem solving , A3 reports , FMEA , 5S , WCM ,

autonomous maintenance , Communication system (POSS system) , kaizen week , project management ,

spare part management , TBT , VFL , BBS , Risk assessment , machine condition monitoring , machining ,

preventive maintenance , Risk management , early equipment management system and all internet

applications)

Field Service Engineer

Responsible for the inspection, repair, preventive maintenance and trouble shooting at the customer site.

Write the technical reports and record any customer complaints and forwarding to the responsible

department.

Support of the customer staff regarding technical problems.

Ordering of spare parts when required with customer approval.

Installation of modifications when required.

Leading of the personnel at the site when required.

If required installation of filling line.

Hand work skills

Computer skills

AUTOCAD 2D/3D 2010 - Excellent

office applications - Excellent

SAP system – Excellent

Solidworks 2013 – professional

1 Jan 2016 till now

Field Service Engineer (Beyti & Al Maraai)

SIG Combibloc Obeikan FZCO. (Multinational co.)

15 February 2015 to 31 December 2015

Senior Mechanical Maintenance Eng. (Semi Manufacturing Dept.)

Pirelli s.p.a. (Multinational co.)

1 March 2014 to 14 February 2015

Curing Mechanical Maintenance Eng. & Main Workshop Supervisor

Dept.) Pirelli s.p.a. (Multinational co.)

1 November 2012 to 28 February 2014

Mechanical Maintenance Eng. (Semi Manufacturing Dept.)

Pirelli s.p.a. (Multinational co.)

1 October 2011 to 31 October 2012

Preventive Maintenance Engineer (fiber line Dept.)

Alex Fiber – Aditya Birla group. (Multinational co.)