AG

RI

PIV

OT

AGRI PIVOT

The articulated vehicle with gre-at capacity and telescopic boom that can meet every need.

Great agility, precise move-ments, excellent visibility, maximum po-wer to the wheels and to the boom, abso-lute comfort: are just some of the rea-sons that make Agri Pivot essential.

The new generation, high perfor-mance ecological engines, with fully electronic control, deliver all the power you need with the lowest consumption of its category.

THE MOST VERSATILE

WHERE THE OTHERS CAN'T ARRIVE

PIVOT

EVOLUTION

COMFORT

HI - TECHNOLOGY

GREEN CORE

COMPACT LINE

50 - 68 - 75 hp3 POSSIBLE ENGINE SIZES

1800 - 2250 KgMAXIMUM CAPACITY4 - 4.72 m

LOADING HEIGHT

RELIABLE AND PRODUCTIVE!6 models, a wide range of dedica-

ted high quality attachments and compo-nents ensure a high performing level in all working conditions.

Compact Flexible and Powerful.All equipped with cutting-edge

Intuitive technologies and large control display that provides all the operational information in real time. Great perfor-mance for Great Results.

CONCEPTHydrostatic transmission, central

double-joint articulation with total stee-ring angle of 80°, oscillating rear axle with a total range of 25°, large output an-gle (>30°) and moment limiter make

50 hp

capacity 1800 -1250 kg

3.07 - 4.00 m

Agri Pivot T 40

mass 4950 kg

68 hp

capacity 2200 -1300 kg

3.43 - 4.46 m

Agri Pivot T 50

mass 5470 kg

75 hp

capacity 2250 -1300 kg

3.55 - 4.72 m

Agri Pivot T 60

mass 6020 kg

HEAVY LINE115 hp

capacity 3000 -1650 kg

3.75 - 5.00 m

Agri Pivot T 70

mass 7150 kg

140 hp

capacity 3500 -2000 kg

3.86 - 5.20 m

Agri Pivot T 80

mass 8000 kg

154 hp

capacity 4000 - 2250 kg

4.60 - 6.00 m

Agri Pivot T 90

mass 9000 kg

The adoption of the latest exha-ust gases treatment technologies such as DPF and SCR with AdBlue allow Agri Pivot to comply with the restrictive anti-pollution standards Stage 3A - 3B/Tier 4i - Stage 4/Tier 4 Final.

DPF and SCR engines with

Fuel consumption is drastically redu-ced thanks to the new engines of latest gene-ration, with fully electronic control.

AdBlueAgri Pivot an extremely handy, reliable and safe machine.

Possibility of coupling different accessories (engine) for the same mo-del.

115 - 140 - 154 hp3 POSSIBLE ENGINE SIZES

3000 - 4000 KgM A X I M U M C A P A C I T Y5 - 5,85 m

LOADING HEIGHT

EVOLUTION

PIVOT SYSTEM

VERSATILITY

40 Km/hFAST MOVEMENTS

INCHINGPEDAL

FULL TRACTIONCONTROL

SPEED

PIVOT SYSTEM

Up to 40 km/h (limited by regu-lations) with high tractive power. Rapid acceleration and maneuvering in total safety.

The ingenious two-pin articula-tion system gives Agri Pivot exceptional stability and robustness.

This particular solution also pro-tects wiring and drive shaft inside the jo-int from accidental impact.

INCHING PEDAL

FULL TRACTION CONTROL

An essential control when move-ments must be slowed right down or stop-ped and maximum hydraulic power is re-quired for the equipment in use.

The servo-assisted service bra-ke ensures safe and modulated braking, while reducing stress on the pedal.

The innovative electronic engi-ne/transmission control system allows progressive speed control in all wor-king conditions.

ISO 24410 UNIVERSAL MOUNTING FRAME

Available as an option, in me-chanical or hydraulic version, it is used to achieve full interchangeability of all the attachments normally used for Skid Loaders (models T40 T50 T60 only).

>30° OUTPUT ANGLE

There are no obstacles. In earth moving and off-road operations, the LARGE >30° output angle makes the Agri Pivot unstoppable.

COMFORTROPS-FOPS

A/C

VISIBILITY360°

ON-BOARDCOMPUTER

ABSOLUTE COMFORT

It's the first thing you notice on bo-ard an Agri Pivot. The intelligently desi-gned control layout makes the machine simple, intuitive and comfortable to use.

The two large doors with 180° opening, makes it easier and safer to ac-cess the driver's seat.

Inside the cab everything has be-en designed in order to make work ea-sier for the operator.

The semi-automatic climate control with 7 air vents, the sunroof and the total or partial opening of the 2 do-ors allow better ventilation during work.

Unparalleled technology with the new on-board computer.

The display shows clearly and in real time all the information necessary to operate the vehicle.

Soundproofing, adjustable ste-ering wheel height and depth, storage compartments and various accessories such as radio, sunshade and pneumatic ergonomic seat allow to operate in con-ditions of total comfort.

The front curved glass, the windscreen wiper that cleans the upper section, the large glass surfaces and the raised driver's seat contribute to achieve an unparalleled 360° view also with rai-sed boom.

HANDLING

AGILITY

NEW JOYSTICK

EASY DUMPING

TURNINGRADIUS

EASY RIDE

ALL THE CONTROLS IN ONE HAND with absolute precision.

The 4-in-one joystick, standard equip-ment on all models, provides integrated con-trol of the vehicle. The integral travel direction reversing control (optional) allows rapid shut-tling between forward and reverse.

The compensated flow sharing control valve allows simultaneous operation of all mo-vements.

EASY RIDEDeveloped by DIECI design engi-

neers, the sophisticated pneumo-hydraulic suspension system installed on the boom (optional) drastically reduces oscillation when traveling over rough ter-rain.

AGILITYThe high-efficiency steering

system ensures that even under high lo-ad conditions the steering always feels light and responsive.

The steering is performed by 2 hydraulic cylinders that make the mane-uver uniform and compact in the two di-rections.

EASY DUMPINGThe exclusive and compact swi-

vel mechanism, specifically designed to incre-ase the service angle, is particularly valuable when recalling the bucket to the ground and unloading at maximum height.

FOOTPRINT DIMENSIONS = VEHICLE DIMENSIONS

The central articulation system is craftily and smartly designed by DIECI engineers as it allows excellent control by the operator when maneuvering.

The machine footprint is always determined by the front or rear wheels, ensuring that the operator will never hit obstacles with the vehicle rear when ope-rating.

GREEN CORE

SCR(SELECTIVE CATALYST REDUCTION)

DPF(DIESEL PARTICULATE FILTER)STAGE 3A

STAGE 3B/Tier 4iSTAGE 4 /Tier 4 FinalNEW ENGINES

- 20%FUEL

CONSUMPTION

r

S pply

DOC upstream

temp. sensor

ixe

pipes

intake air

humidity & Airtemp. sensor

filter

DEF

u

Moduleexhaust flap

Engine ECU

NOx

sensor

temp. sensor

NOx

sensor

temp. sensor

SCR upstream

DEF quality

NH3

sensorSCR downstream

SCR+CUC

sensor

DEF

mixer

DEF level &

temp. sensor

DEF tank

DO

C +

m

Do

sin

g

Module

Stage 3A

Stage 3B/Tier 4i

ENGINES:Upon request on T50 and T60 models,

for markets that do not need to comply with the latest anti-pollution regulations.

ENGINESTurbo Diesel Aftercooler Engines

Common Rail with fully electronic control.

DIECI FOR THE ENVIRONMENT

A leap forward into a cleaner, more sustainable future.

Dieci has chosen full electronic ma-nagement of fuel injection, turbo pressure, torque, engine rpm, engine brake, starter safety release, monitoring, diagnostics and the SCR or DPF system for the tre-atment of exhaust emissions.

Enhanced performance, lower fuel consumption, reduced engine oil con-tamination and longer intervals between services.

(AdBlue)

Significant reduction in fuel consumption and longer intervals between services.

ENGINES:Updated with the latest regulations, re-

duced emissions up to 90% due to particulate removal and 50% less nitrogen oxides.

Stage 4/Tier4 final

Inte

rcoole

r

DOC DPF

air filter

aspiratedair flow

turbo intake

horizontal section

ERG

coole

r

air flow sensor(with pipe)

PIVOTSYSTEM

CENTRAL BOOM

DOUBLE-PINARTICULATED

JOINT

FLAT BOTTOM

REAROSCILLATING

AXLE

REAR OSCILLATING AXLE

This system allows the perfect adaptability to any type of terrain, al-ways ensuring four support points and maintaining maximum lateral stability as on a flat ground.

Rear oscillating axle, >30° out-put angle, boom in central position and with the many stability sensors it is possi-ble to operate in extreme conditions in to-tal safety.

PIVOT SYSTEMExceptional result obtained by

the staff of Dieci engineers for the central double-joint articulation with 80° stee-ring angle.

Two joints with high resistance, grease lubricated pins and bushings,

and guarantee of perfect seal with LONG LIFE gaskets.

Incredible robustness: even in ex-treme situations the joint does not un-dergo deformation. Flat bottom and dri-ve shaft positioned within the joint allow the operator to work any terrain in total peace of mind.

TECHNOLOGY65 - 140 l/1’

QUICK DEP

LONG LIFE PINS1000 HOURS

CAMERA

HYDRAULIC SYSTEM

The new hydraulic pumps, with flow rate from 65 to 140 l/1', ensure gre-ater speed of execution of the maneu-vers and processing times reduction up to 20%.

QUICK DEP

System for depressurising the hydraulic service couplers: makes the connection of implements easy and ef-fortless.

MAINTENANCE

All the available spaces are pro-perly exploited to house the fuel and AdBlue tanks in a safe and accessible po-sition.

Routine maintenance to the engi-ne is facilitated by the hinged hood.

LONG LIFE PINS

All pins and bushings inserted at the jun-ction points of the Pivot are lubricated with grease and sealed by LONG LIFE gaskets.

CAMERAMAXIMUM CONTROL

The cameras (optional) provide a millimetric view on the screen facilita-ting the load and movement operations.

1000 HOURS

Engine oil replacement every 500 hours and periodic maintenance for all components such as filters and moving parts every 1000 hours.

Longer work cycles, less stops, greater productivity.

FORKSPARALLELISM

CYLINDERINSIDE

THE BOOM

COMPACTCAB

COMPUTER

COMPACT CABThe DIECI research and deve-

lopment department designed the lo-west cab of the category keeping the dri-ving seat in raised position and obtai-ning the perfect combination of visibility and compactness.

POWER INSIDEThe boom positioned centrally

with respect to the machine and the ex-tension cylinder arrange inside it ensure better visibility, without risk of accidental impacts.

ON-BOARD COMPUTER

Advanced instrumentation with a large display and intuitive icon-based in-terface that provides comprehensive and detailed information. Constant monito-ring of operating conditions and in-depth diagnostics using real-time data.

ATTACHMENTS PARALLELISMThe compensation system allows

to automatically maintain the attachments parallel to the ground during the boom lif-ting and lowering operations.

SAFETY

ROPS-FOPS

ANTI-TIPPINGSYSTEM

ROPS-FOPS approved cab de-signed with safety cell to prevent defor-mation in the event of vehicle overturn or a heavy load falling on the cab.

STURDY CHASSIS

The chassis, with a strong visual impact, unmistakably characterizes Agri Pivot Dieci, the oversized structure con-fers rigidity and total safety even under the most stressful conditions.

The machine is thus totally free of vibration and flexure.

ANTI-TIPPING SYSTEM

Every Dieci machine is equipped with a torque limiter that analyzes vehi-cle stability in real time and inhibits any aggravating movements when the pre-set safety limits are reached.

Hydraulic servo brake as stan-dard on all models to assist the vehicle stopping in the most extreme conditions.

The Joystick is equipped with a capacitive deadman sensor which, combined with the operator presence sensor in the seat, prevents accidental operation.

MADE IN ITALY

FOR THE WORLD

DIECI, with more than half a cen-tury of experience and continuous deve-lopment, achieves the perfect vehicle for every need.

Our Technical Assistance Service maintains a world-wide pre-sence through an extensive network of authorized service centers and dea-lers.

The automated spare parts ware-houses and the direct assistance with the user, provide a very short time of inter-vention.

DIECI, within a few hours, can provide worldwide both spare parts and qualified staff.

WarrantyDIECI offers customized war-

ranty extension packs for components and durability.

T40 T50 T60

4950

0,75

4075

60%

3400

22

5470

0,85

4550

70%

4200

30

6020

0,95

4800

80%

4700

30 (40 Opt)

T40 T50 T60

7,3

3,8

2,5

1,4

2,2

1,6

5,0

2,7

2,3

1,1

1,9

1,3

5,2

2,8

2,4

1,3

1,8

1,3

T40 T50 T60Kubota

Stage 3B / Tier 4i

65

260

102

260

T40 T50 T6098

260

T40 T50 T60

T40 T50 T60

12.5 - 18

365/70R18

405/70R18

500/45 - 20

14.5 - 20

405/70R20

500/45 - 20

600/40 - 22,5

405/70 - 20

420/75R20

500/45 - 20

600/40 - 22,5

COMPACT LINECOMPACT LINE

OptionalStandard •

2-2

No

•

•

2-2

No

•

•

2-2

No

•

•

4-4

•

•

51,5 (69)

2500

2615

230

12

Kubota

36,5 (50)

2700

2615

235

12

Stage 4 / Tier 4 final

Kubota

Stage 3B / Tier 4i

55,4 (74,3)

2600

3331

247

12

T50 T60Yanmar

50 (68)

2500

3319

248

12

Yanmar

55 (75)

2500

3319

254

12

T40 T50 T60

T40 T50 T60

70

75

78

100

80

100

•

•

25°

•

•

80°

•

•

•

25°

•

•

80°

•

•

•

25°

•

•

80°

•

A1

B1

C1

D1

E1

F1

1350

1675

1700

2120

3830

4370

1430

1880

1900

2060

4010

4570

1430

1880

2000

2060

4010

4670

T40 T50 T60

Stage 3A / Tier 3 Stage 3A / Tier 3Stage 3A / Tier 3 Stage 3A / Tier 3

TECHNICALSPECIFICATIONS

PERFORMANCE

Operating load with standard bucket and quick coupling (kg)

Standard bucket capacity (m3)

Pull-out force (daN)

Maximum climb angle

Breakout force (daN)

Maximum speed (km/h)

BOOM

Times: (in seconds)

Lifting

Descent

Extension

Retraction

Swivel (Recall)

Swivel (Unloading)

Patented compensation system

Gear pump with max. capacity (l/1')

Max operating pressure (bar)

HYDRAULIC SYSTEM

TRANSMISSION

Hydrostatic transmission with variable displacement pump

and hydrostatic engine with automatic adjustment

Number of speeds, forward-reverse

Servo controlled 2-speed gearbox

Inching pedal for controlled forward movement

TIRES

Tires

Alternative

Alternative

Alternative

DIFFERENTIAL AXLES - STEERING

Rigid axles: 2, with planetary reduction gears

Front axle ixed to the frame

Oscillating rear axle with total range

Service brake in oil bath on the front servo controlled axle

Negative action parking brake

Articulated frame steering, total steering angle

Servo controlled steering through hydraulic power steering (Load Sensing)

REFUELING (liters)

Hydraulic system (total)

Diesel tank

DIMENSIONS

Dimensions in millimeters

Brand

Maximum power kW (hp)

Speed setting (rpm)

Operation

Injection

Number and arrangement of cylinders

Displacement (cm3)

Specific consumption (g/kWh)

Intake

Cooling system

Starting VOLTS

ENGINE

* at maximum power

EN

GIN

E (

Worl

d v

ers

ion)

4-stroke Diesel

Natural

Liquid

Direct mechanical

4, vertical in line

Turbo compressor

4-stroke Diesel

Direct Electronic

4, vertical in line

Liquid

Turbo compressor

Liquid

Natural

4-stroke Diesel

Direct Electronic

4, vertical in line

Liquid

Turbo compressor

Liquid

A

B

C

D

E

F

G

H

I

L

M

N

O

P

Q

R

T40 T50 T60

4315

3460

3405

2550

40°

435

785

40°

1605

2100

2150

1400

5650

300

30°

2420

4745

3890

3720

2860

40°

565

960

40°

1680

2240

2200

1450

5890

365

31°

2490

5010

4155

3840

2990

40°

610

1060

40°

1805

2365

2200

1450

6015

356

31°

2490

A

B

C

D

E

F

G

H

I

L

M

N

O

P

Q

R

S

T

T40 T50 T60

4000

3070

710

365

500

910

2290

1910

1315

990

500

2420

1400

2150

1485

5035

300

30°

4460

3430

830

340

355

750

2500

2100

1400

1070

500

2490

1450

2200

1630

5280

365

31°

4720

3550

830

435

405

850

2780

2365

1530

1190

500

2490

1450

2200

1750

5400

365

31°

T40 T50 T60

3600

3200

2100

1850

3850

3400

2450

2000

4050

3575

2350

2050

T40 T50 T60

1800

1500

1250

950

2200

1600

1300

1000

2250

1725

1300

1050

DIMENSIONS

Dimensions in millimeters

Tipping load with aligned machine (retracted boom) (Kg)

Tipping load in max articulated position (retracted boom) (Kg)

Tipping load with aligned machine (extended boom) (Kg)

Tipping load in max articulated position (extended boom) (Kg)

Data for machines with quick coupling

PERFORMANCE

Dimensions in millimeters

Operative load EN474.3 (80%) retracted (Kg)

Operative load EN474.3 (60%) retracted (Kg)

Operative load EN474.3 (80%) extended (Kg)

Operative load EN474.3 (60%) extended (Kg)

Data for machines with quick coupling

DIMENSIONS

PERFORMANCE

Due to constant evolution and research, specifications and images are subject to change without notice.

T70 T80 T90

Kubota

85 (115)

2600

3769

227

12

Stage 3B/Tier 4i

FPT

129 (175)

2200

4500

209

12

Stage 4/Tier 4 final

7150

1,10

6000

80%

6000

40

8000

1,20

6700

80%

6500

36

9000

1,50

7200

80%

8500

40

HEAVY LINE

T70 T80 T90

5,3

3,0

2,3

1,2

2,1

1,3

5,3

3,0

3,2

1,8

2,4

1,6

5,2

3,3

3,1

1,7

2,0

1,4

T70 T80 T90FPT

105 (140)

2200

4500

205

12

Stage 4/Tier 4 final

-

114

230

140

-

265

T70 T80 T90-

114

240

T70 T80 T90-

•

4-4

•

•

-

•

2-2

•

•

-

•

2-2

•

•

T70 T80 T90

T70 T80 T90

405/70x24

460/70x24

600/50-22.5

-

15,5x25

460/70x24

500/70x24

600/50-22.5

17,5x25

15,5x25

500/70x24

600/55-26.5

T70 T80 T90

110

140

-

120

165

27

160

125

27

•

•

25°

-

•

•

80°

•

•

•

25°

•

•

•

80°

•

•

•

25°

•

•

•

80°

•

DIMENSIONS

Brand

Maximum power kW (hp) @

Speed setting (rpm)

Operation

Injection

Number and arrangement of cylinders

Displacement (cm3)

Specific consumption (g/kWh)

Intake

Cooling system

Starting VOLTS

ENGINE

PERFORMANCE

Operating load with standard bucket and quick coupling (kg)

Standard bucket capacity (m3)

Pull-out force (daN)

Maximum climb angle

Breakout force (daN)

Maximum speed (km/h)

BOOM

Times: (in seconds)

Lifting

Descent

Extension

Retraction

Swivel (Recall)

Swivel (Unloading)

Patented compensation system

* at maximum power

Variable displacement piston pump with max. capacity (l/1')

Gear pump with max. capacity (l/1')

Max operating pressure (bar)

HYDRAULIC SYSTEM

4-stroke Diesel

Direct Electronic

4, vertical in line

Turbo compressor intercooler

Liquid

A1

B1

C1

D1

E1

F1

1560

1980

2100

2400

4450

5000

Dimensions in millimeters

1660

2070

2200

2560

4630

5250

1790

2300

2400

2800

5100

5700

T70 T80 T90

TRANSMISSION

Single speed hydrostatic transmission Vario System EVO2

with electronic control

Hydrostatic transmission with variable displacement pump

and hydrostatic engine with automatic adjustment

Number of speeds, forward-reverse

Servo controlled 2-speed gearbox

Inching pedal for controlled forward movement

DIFFERENTIAL AXLES - STEERING

Rigid axles: 2, with planetary reduction gears

Front axle ixed to the frame

Oscillating rear axle with total range

Service brake in oil bath on the 4 servo controlled wheels

Service brake in oil bath on the front servo controlled axle

Negative action parking brake

Articulated frame steering, total steering angle

Servo controlled steering through hydraulic power steering (Load Sensing)

TIRES

Tires

Alternative

Alternative

Alternative

REFUELING (liters)

Hydraulic system (total)

Diesel tank

AdBlue tank

TECHNICALSPECIFICATIONS

A

B

C

D

E

F

G

H

I

L

M

N

O

P

Q

R

T70 T80 T90

5250

4300

4015

3060

40°

400

880

40°

1670

2300

2400

1550

6250

410

31°

2690

5450

4510

4140

3200

40°

500

990

40°

1750

2400

2550

1675

6625

400

30°

2700

6075

5100

4600

3610

40°

500

1020

40°

1950

2600

2800

1640

7040

420

32°

2830

A

B

C

D

E

F

G

H

I

L

M

N

O

P

Q

R

S

T

T70 T80 T90

5000

3750

900

630

100

550

2625

2000

1300

900

500

2690

1550

2400

1570

5520

410

31°

5200

3865

1500

430

145

640

2825

2350

1445

1030

500

2700

1675

2550

1670

5895

400

30°

5800

4280

1680

520

160

710

3230

2720

1640

1200

500

2830

1640

2800

1850

6290

420

32°

T70 T80 T90

4800

4250

2500

2350

6100

5400

3200

2800

6500

5700

3800

3350

T70 T80 T90

3000

2300

1650

1300

3500

2600

1800

1400

4000

3000

2200

1650

Dimensions in millimeters

Dimensions in millimeters

Tipping load with aligned machine (retracted boom) (Kg)

Tipping load in max articulated position (retracted boom) (Kg)

Tipping load with aligned machine (extended boom) (Kg)

Tipping load in max articulated position (extended boom) (Kg)

Data for machines with quick coupling

Operative load EN474.3 (80%) retracted (Kg)

Operative load EN474.3 (60%) retracted (Kg)

Operative load EN474.3 (80%) extended (Kg)

Operative load EN474.3 (60%) extended (Kg)

Data for machines with quick coupling

DIMENSIONS

DIMENSIONS

PERFORMANCE

PERFORMANCE

Due to constant evolution and research, specifications and images are

subject to change without notice.

design and photos LORENZ Studio Grafico by www.masterservicelorenz.it

ww

w.d

ieci

.com

REV. 2015 03 05

Dieci S.r.l. - Via E. Majorana, 2-4 - Montecchio Emilia (RE) ITALY - Tel. +39 0522 869611 - Fax +39 0522 869798 - E-mail: info@dieci.com