5/25/2018 AGC 242 Technical Data

1/9

Technical Details of AGC 242 (Advanced Genset Controller)

Advantages of DEIF AGC242 :

1)AGC 242 Island Power Management, up to 16 generators, up to 8 bus tieBreakers.

2)CANBUS communication:

5/25/2018 AGC 242 Technical Data

2/9

Technical Details of AGC 242 (Advanced Genset Controller)

CAN A CAN Share (Quick and Fast Load Share.CAN B Power Management.CAN C External I/O Module or H5 EIC or IOM 230.

External I/O Module.AGC 200 supports external I/O modules from othermanufacturers. Other products connect to the AGC 200 via CANbus if more I/Os are

needed.External I/Os are handled in the same way as if featured by the AGC 200.

2) Remote Operator Panel:

M-Logic in the utility software allows you to decide the functionality of each LED andpush-button.

5/25/2018 AGC 242 Technical Data

3/9

Technical Details of AGC 242 (Advanced Genset Controller)

An advanced remote operator panel, AOP-2, connects to the AGC 200 viaCANbus. The AOP-2 has eight push-buttons and 16 LEDs in three colours. Theirfunctionalities can be programmed with the utility software using M-Logic

3) SD Memory Card:

Life time loging of all events and alarms Download of parameterfiles without use of laptop

4) Fuel Efficient Power Management:

Asymmetrical Load Sharing Priority Selection Manual (Operator Selection)

- Automatic (Running Hrs. Counters)

N

S

EW

G1

G2

G3

G4

G5

G6

G7

G8

G12

G11

G10

G9

Optimiced fuel

setpoint

Power Spinning reserve

5/25/2018 AGC 242 Technical Data

4/9

Technical Details of AGC 242 (Advanced Genset Controller)

5) Measuring Voltage Input:

Generator Voltage Bus Bar Voltage

The Generator and Busbar/Mains voltages are galvanic separated to insure asynchronization who are not influenced by earth failures on the generator or load.The operation range is configurable from 100V to 690V PP

6) Plant Configuration:

Plant configuration. A graphic configuration of your application.The configuration software enables you to draw your application and download it to thecontroller. Setup is done within minutes.

5/25/2018 AGC 242 Technical Data

5/9

Technical Details of AGC 242 (Advanced Genset Controller)

7) CAN Share for Digital Load Sharing (Quick and Fast Load Sharing):

8) Modbus and CANBUS Communication:

CAN A B C CAN Ports are individually galvanic separated.

Dependent of product variant the CAN port have the following function Genetic J1939 or engine specific engine communication including MTU MDEC-

ADEC IOM 200 CAN to analog regulation/ load sharing modules. CAN Share load sharing Additional operator panels External I/O (Beckhoff)

Power management

Modbus RS 485 RTU Galvanic separated Address range from 1 to 247 Communication speed from 9600 bps to 115.2 kbps Data refresh rate better than 300 mS.

5/25/2018 AGC 242 Technical Data

6/9

Technical Details of AGC 242 (Advanced Genset Controller)

9) Communication from the Single Product:

Technical Data of AGC 242:

Protection :

5/25/2018 AGC 242 Technical Data

7/9

Technical Details of AGC 242 (Advanced Genset Controller)

Power Management :

5/25/2018 AGC 242 Technical Data

8/9

Technical Details of AGC 242 (Advanced Genset Controller)

Measuring

Single/Power Management Plant Mode:

General :

5/25/2018 AGC 242 Technical Data

9/9

Technical Details of AGC 242 (Advanced Genset Controller)

Control:

Input/Output:

Benefits of DEIF Product:

A very stable private own company on the market since 1933. Know-how, solution and products from simple AMF application to very advanced

multiple generator application (up to 256 generators). World Wide recognized brand with export to more than 100 countries. Extensive customer care program from product selection to field commissioning. State of the art simulator customer product training. Front runner in Green Power Technology. Controllers with future profe communication. Markets most advantaged Fuel efficient PMS. Safe and redundant controllers. 24x7 Customer Support.