Aftermarket Tractor/Skidsteer Attachments Edney ...5)tractor_attach/2014/… · Used on Case, New...
Transcript of Aftermarket Tractor/Skidsteer Attachments Edney ...5)tractor_attach/2014/… · Used on Case, New...
SEQ. #416-713 MINNESOTA PRICING PAGES
(Typed Your Responses Required in Yellow CellsJULY, 2013
Price quote for: Aftermarket Tractor/Skidsteer Attachments
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip
Phone #:
Toll Free #:
Fax #:
Email Address:
1.0 Manufacturer's Name
Attachment Description
Warranty Term (months, years)
Discount to be applied to Price List
Date & I.D. of Price List
2.0 Delivery Charges
(SEE SPECIAL TERMS AND CONDITIONS)
DELIVERY STARTING POINT: City, State, Zip
Price per loaded mile:
Minimum Delivery Charge (if any)
(SEE SPECIAL TERMS AND CONDITIONS)
3.0 Price for additional Service Manual
Price for additional Parts Manual
4.0 Installation Labor Rate - Per HourInstallation services may be requested on a
"as needed" basis. If not available, list 'N/A'
(See Special Terms and Conditions).
No Charge
No Charge
$80.00
N/A
(888) 443-3639
(952) 469-5269
Danuser
Hammer Post Driver (SS and Tractor Loader Mount)
1 Year
5%
4-15-13 Hammer Series Price Sheet
NO FLAT RATE ALLOWED
Fulton, MO, 65251
$0.40
(952) 469-5267
Edney Distributing Co., Inc.
Gary Berger
8485 215th ST W
Lakeville, MN, 55044
SEQ. #416-713 MINNESOTA PRICING PAGES
(Typed Your Responses Required in Yellow CellsJULY, 2013
5.0 New Aftermarket Attachment Rental ProgramIf rental programs are available on the new equipment offered, with the option
to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of
rental fee paid by the purchaser that will be applied to
the purchase price. (See Solicitation Special Terms & Conditions.)
Hourly Rental Rate:
Weekly Rental Rate:
Monthly Rental Rate:
Percent (%) of Rental Fee applied toward purchase price:
6.0 Vendor Owned Rental or Demo Attachment Sales Program (See Solicitation Special Terms and Conditions.)
DEDUCT 'Cost per Used Hour' from the original Contract Price
Warranty Program Options:
(provide details)
N/A
N/A
N/A
N/AN/A
N/A
Page 1 of 4Form No. 3271R 15 April 2013
www.danuser.com
HAMMER SERIES PRICE SHEET
Dimensions given in inches. Weight given in pounds. Dollars are U.S. Dollars
Page 2 of 4Form No. 3271R 15 April 2013
Price Sheet - Hammer
SKID-STEER MOUNTPART NO. DESCRIPTION WT. LIST PRICE
21000 Hammer SM40Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40” stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96” length hoses with flat face couplers.
915 $5,195.00
21001 Hammer SM40 with GrappleGrapple for one-man operation
955 $5,695.00
21002 Hammer SM40 with TiltTilt left or right up to 20°. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery.
1005 $6,995.00
21003 Hammer SM40 with Grapple and Tilt 1045 $7,495.00
PART NO. DESCRIPTION WT. LIST PRICE 21006 Hammer LM40
Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40” stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96” length hoses with flat face couplers. See Front-End Loader Hose Kit below for connection to rear tractor remotes.
946 $5,295.00
21007 Hammer LM40 with GrappleGrapple for one-man operation
986 $5,795.00
21008 Hammer LM40 with TiltTilt left or right up to 20°. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery.
1076 $7,095.00
21009 Hammer LM40 with Grapple and Tilt 1116 $7,595.00
FRONT-END LOADER MOUNT - SKID-STEER QUICK ATTACH
PART NO. DESCRIPTION WT. LIST PRICE 21010 Hammer EM40
Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40” stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96” length hoses with flat face couplers. See Front-End Loader Hose Kit below for connection to rear tractor remotes.
880 $5,370.00
21011 Hammer EM40 with GrappleGrapple for one-man operation
920 $5,870.00
21012 Hammer EM40 with TiltTilt left or right up to 20°. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery.
970 $7,170.00
21013 Hammer EM40 with Grapple and Tilt 1010 $7,670.00
FRONT-END LOADER MOUNT - EURO QUICK ATTACH
PART NO. DESCRIPTION WT. LIST PRICE 21231 Front-End Loader Hose Kit
1/2” hose kit, 25’ long, with flat face ISO couplers and pioneer couplers. Mounting bracket included for welding or attaching with “bolts and nuts.” Hardware not included.
18 $345.00
FRONT-END LOADER HOSE KIT
Recommended 75 HP & above tractors. DO NOT exceed the tractor loader Rated Operating Capacity. Use sufficient counter weights.
Recommended 75 HP & above tractors. DO NOT exceed the tractor loader Rated Operating Capacity. Use sufficient counter weights.
Page 3 of 4Form No. 3271R 15 April 2013
Price Sheet - Hammer
HAMMER SERIES ACCESSORIES
REF. PART NO. DESCRIPTION WT. LIST PRICE A 21004 Grapple
May be added to the Hammer SM40. Grapple for one-man operation65 $600.00
B 21005 TiltMay be added to Hammer SM40. Tilt left or right up to 20°. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery.
200 $1,995.00
C 21149 T-Post AdapterMust be added to Hammer SM40 for driving t-posts.
22 $120.00
D 21212 Plate - Floating Horseshoe Recommended when driving smaller diameter pipe (less than 4”) in difficult conditions. Aids in keeping the post centered in the driver and reduces wear and tear on machine. Does not interfere with operation of the grapple. Works with posts 5” diameter and smaller including “T” post adapter.
20 $60.00
21163 Additional Weight KitSteel shot may be added to Hammer SM40 for additional weight and driving force.
220 $295.00
Contact Danuser if the part you are looking for is not listed.
Dig 26
Dig 25
A B
C D
Page 4 of 4Form No. 3271R 15 April 2013
Price Sheet - Hammer
A B
OPTIONAL WIRING HARNESSES
REF. PART NO. DESCRIPTION LIST PRICE A 21220 Wiring Harness 8-Pin (Allows tilt function operation from joy stick controls)
Used on ASV, Caterpillar, Komatsu, Terex 8 pin$135.00
A 21221 Wiring Harness 14-pin (Allows tilt function operation from joy stick controls)Used on Case, New Holland, Bobcat, Volvo, Takeuchi 14 pin
$135.00
A 21222 Wiring Harness 14-pin Deere (Allows tilt function operation from joy stick controls)Used on John Deere 14 pin
$135.00
B 21223 Cigarette Lighter Adapter (Used with diverter valve, instead of battery connections)Connect universal wiring harness supplied with Hammer to cigarette lighter
$24.00
PN DESCRIPTION LIST PRICE DIG 5 Safety Sign N/CDIG 10 Danuser Decal $2.08DIG 13 Safety Sign N/CDIG 14 Safety Sign N/CDIG 16 Safety Sign N/CDIG 21 Safety Sign N/C
PN DESCRIPTION LIST PRICE DIG 22 Safety Sign N/CDIG 23 Safety Sign N/CDIG 24 Safety Sign N/CDIG 25 Safety Sign N/CDIG 26 Safety Sign N/C
HAMMER DECALS & SAFETY SIGNS
SEQ. #416-713 MINNESOTA PRICING PAGES
(Typed Your Responses Required in Yellow CellsJULY, 2013
Price quote for: Aftermarket Tractor/Skidsteer Attachments
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip
Phone #:
Toll Free #:
Fax #:
Email Address:
1.0 Manufacturer's Name
Attachment Description
Warranty Term (months, years)
Discount to be applied to Price List
Date & I.D. of Price List
2.0 Delivery Charges
(SEE SPECIAL TERMS AND CONDITIONS)
DELIVERY STARTING POINT: City, State, Zip
Price per loaded mile:
Minimum Delivery Charge (if any)
(SEE SPECIAL TERMS AND CONDITIONS)
3.0 Price for additional Service Manual
Price for additional Parts Manual
4.0 Installation Labor Rate - Per HourInstallation services may be requested on a
"as needed" basis. If not available, list 'N/A'
(See Special Terms and Conditions).
No Charge
No Charge
$80.00
N/A
(888) 443-3639
(952) 469-5269
Danuser
PRO Series Earth Auger
Mounting/Augers: 1 Year, Drive Unit: 5 Years
5%
1-1-13 PRO Earth Auger Price List
NO FLAT RATE ALLOWED
Fulton, MO, 65251
$0.40
(952) 469-5267
Edney Distributing Co., Inc.
Gary Berger
8485 215th ST W
Lakeville, MN, 55044
SEQ. #416-713 MINNESOTA PRICING PAGES
(Typed Your Responses Required in Yellow CellsJULY, 2013
5.0 New Aftermarket Attachment Rental ProgramIf rental programs are available on the new equipment offered, with the option
to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of
rental fee paid by the purchaser that will be applied to
the purchase price. (See Solicitation Special Terms & Conditions.)
Hourly Rental Rate:
Weekly Rental Rate:
Monthly Rental Rate:
Percent (%) of Rental Fee applied toward purchase price:
6.0 Vendor Owned Rental or Demo Attachment Sales Program (See Solicitation Special Terms and Conditions.)
DEDUCT 'Cost per Used Hour' from the original Contract Price
Warranty Program Options:
(provide details)
N/A
N/A
N/A
N/AN/A
N/A
Page 1 of 12Form No. 3253R 1 January 2013
TO PRICE A COMPLETE UNITDrive Unit (pgs. 2-3) Hoses & Couplers (pg. 2)Mount (pg. 4) Augers (pgs. 5-10) Auger Accessories (pgs. 11-12) Replacement Wear Parts (pg. 12)Freight
TOTAL
______________________________________________________________________________________________________________________________
__________________
www.danuser.com
PRO EARTH AUGER PRICE LIST
Dimensions given in inches. Weight given in pounds. Dollars are U.S. Dollars
Professional strength for extreme applications. Units range from 6 - 60 GPM and up to 3000 and 5000 PSI. Mountings
are available for front-end loader, skid-steer, excavator, mini-excavator, and backhoe.
5-Year Warranty
Page 2 of 12Form No. 3253R 1 January 2013
MODEL 615 $1,849.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox Ratio
2-9/16” Rd. Part No. 2” Hex Part No. Approx. Ship Weight (lbs.)
GPM68
101215
RPM3344556682
PSI200025003000
Ft.-lbs.111513931672
Speed Torque
24”6 - 15 GPM3000 PSI1500 PSI4.08:1
1006110062154
MODEL 1025 $1,849.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox Ratio
2-9/16” Rd. Part No. 2” Hex Part No. Approx. Ship Weight (lbs.)
GPM1014182025
RPM3955707898
PSI200025003000
Ft.-lbs.156919622354
Speed Torque
30”10 - 25 GPM3000 PSI1500 PSI4.08:1
1001010011156
MODEL 1530 $1,999.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox Ratio
2-9/16” Rd. Part No. 2” Hex Part No. Approx. Ship Weight (lbs.)
GPM15202530
RPM45607590
PSI200025003000
Ft.-lbs.204525573068
Speed Torque
36”15 - 30 GPM3000 PSI1500 PSI4.08:1
1001510016157
MODEL 2035 $2,199.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox Ratio
2-9/16” Rd. Part No. 2” Hex Part No. Approx. Ship Weight (lbs.)
GPM20253035
RPM47597182
PSI200025003000
Ft.-lbs.260532563907
Speed Torque
36”20 - 35 GPM3000 PSI1500 PSI4.08:1
1002010021159
PART NO. DESCRIPTION WT. LIST PRICE 10047 Cross Port Relief Valve
(required for pressures exceeding 3000 PSI)7 $345.00
PART NO. DESCRIPTION WT. LIST PRICE 10050 1/2” HOSE KIT with flat face ISO couplers 14 $203.0010051 3/4” HOSE KIT with flat face ISO couplers 19 $281.0010171 3/4” HOSE KIT with flat face ISO couplers
(for models 2545H & 3060H, not to exceed 45 GPM)19 $281.00
10043 1/2” HOSE KIT (includes fittings NOT couplers) 9 $135.0010044 3/4” HOSE KIT (includes fittings NOT couplers) 14 $213.00
Hoses are 96” long with abrasion sleeves3/4” hoses REQUIRED for 20 GPM or more
Flat face ISO couplers
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 3 of 12Form No. 3253R 1 January 2013
MODEL 2545H $3,565.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox RatioNO DRAIN LINE REQUIRED
2” Hex Part No. Approx. Ship Weight (lbs.)
GPM2530354045
RPM56677990
101
PSI200025003000
Ft.-lbs.272734094090
Speed Torque
48”25 - 45 GPM3000 PSI400 PSI23.72:1
10075226
MODEL 3060H $3,775.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox RatioNO DRAIN LINE REQUIRED
2” Hex Part No. Approx. Ship Weight (lbs.)
GPM3040505560
RPM52708796
105
PSI200025003000
Ft.-lbs.350343795255
Speed Torque
48”30 - 60 GPM3000 PSI400 PSI23.72:1
10076235
MODEL HP-3060H $4,335.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox RatioNO DRAIN LINE REQUIRED
2” Hex Part No. Approx. Ship Weight (lbs.)
GPM3040505560
RPM52708796
105
PSI350045005000
Ft.-lbs.613178838759
Speed Torque
48”30 - 60 GPM5000 PSI400 PSI23.72:1
10078245
MODEL HP-2545H $4,135.00
Maximum Auger Diameter Hydraulic FlowMaximum Hydraulic PressureMaximum Hydraulic Back Pressure Gearbox RatioNO DRAIN LINE REQUIRED
2” Hex Part No. Approx. Ship Weight (lbs.)
GPM2530354045
RPM56677990
101
PSI350045005000
Ft.-lbs.477261366817
Speed Torque
48”25 - 45 GPM5000 PSI400 PSI23.72:1
10077242
HOSE KITS ARE NOT AVAILABLE FOR THE HP MODELS. DEALER/CUSTOMER IS RESPONSIBLE FOR PROPER HOSES AND COUPLERS.
HIGH-PRESSURE DRIVE UNITS (UP TO 5000 PSI) LISTED BELOW NO DRAIN LINE REQUIRED
NO DRAIN LINE REQUIRED
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 4 of 12Form No. 3253R 1 January 2013
SKID-STEER QUICK ATTACH
QUICK ATTACH MOUNTING KITS
TLB (BACKHOE) & EXCAVATOR
SMALL BACKHOE & MINI-EXCAVATOR
BOLT-ON BUCKETMounting Kit (includes knuckle and cradle) attaches the Drive Unit to skid-steers with Standard 2-pin system and SAE quick couplers.
PART NO. WT. LIST PRICE10499 129 $385.00
PART NO.
MAKES & MODELS WT. LIST
PRICE10172 Cat 420D & 420E
(pin grabber)75 $668.00
10173 JCB 208S, 803, & 8018
40 $555.00
10174 JD 790ELC 172 $1,036.0010175 JD 135C RTS 82 $639.0010176 YANMAR VIO27 &
VIO35 (quick coupler)45 $552.00
10177 YANMAR VIO40, VIO45, VIO55, & VIO50 (quick coupler)
50 $562.00
20007 KUBOTA KX 161-3 & U45
60 $416.00
20008 KUBOTA KX121 60 $416.0020026 KUBOTA KX057 60 $416.00
PART NO. BUCKET PIN DIA. WT. LIST PRICE
10201 25 mm 42 $257.0010201 1 inch 42 $257.00 10202 30 mm 42 $257.0010203 1-1/4 inch 42 $257.0010204 35 mm 42 $257.0010204 1-3/8 inch 42 $257.0010205 1-1/2 inch 42 $257.0010206 40 mm 42 $257.0010298 1-5/8 inch 42 $257.0010207 1-3/4 inch 46 $257.0010208 45 mm 46 $257.00 10209 50 mm 46 $257.0010210 2 inch 46 $257.00
Less dipperstick pin. For dipperstick widths from 3-1/2” to 8”. Bucket pin diameters listed below.
PART NO.
BUCKET PIN DIA. WT. LIST
PRICE10296 1-5/8 inch 49 $388.0010231 1-3/4 inch 49 $388.0010481 45 mm 50 $388.0010232 50 mm 50 $388.0010233 55 mm 48 $388.00
Welded mount w/ fixed width
50 $490.00
Less dipperstick pin. For dipperstick widths up to 13”.
PART NO. WT. LIST PRICE10248 40 $260.00
Mounting Kit (includes knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware.
PART NO. DESCRIPTION WT. LIST PRICE20656 Quick Attach Plate Offset
w/ hardware74 $345.00
20657 Euro/Global Offset w/ hardware
86 $370.00
OFFSET FRONT-END LOADER QUICK ATTACHMounting kit (includes knuckle and cradle) attaches Drive Unit to skid-steers or front-end loaders with a skid-steer or euro/global quick attach system.
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 5 of 12Form No. 3253R 1 January 2013
DIA. LIST PRICE WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
4” $285.00 58 20600 20601 20602
6” $360.00 86 20603 20604 206059” $550.00 122 20606 20607 20608
4’ Length
WOBBLE AUGERSPatent Pending
Danuser’s Dirtless Digging Solution• Pushes through
Dirt Sand Clay Asphalt Compacted Rock Embedded Rock
• No loose dirt in the bottom of the hole
• No excess dirt to fall back into the hole
• No dirt to remove around the top of the hole
• Compacted hole ready for concrete
• Suggested mounting to skid-steers, front-end loaders, backhoes, excavators, mini-excavators, telescopic handlers, articulated loaders, and integrated tool carriers
• Requires down force for correct operation
• Not for 3-point hitch mounted diggers
• Spiral & Checkered Hardfacing
• Hardened Fishtail Point
PART NO. DESCRIPTION LIST PRICE10331 Dirt $28.0010332 Hardfaced $61.0010335 Carbide $106.00
POINTS
To be used with Danuser PRO and EP units.
NOTE: The 9” Wobble Auger should be used on a machine with an Operating Load or Rated Operating Capacity of 2250 lbs. or greater, utilizing an auger drive with 2000 ft.-lbs. of torque or greater
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 6 of 12Form No. 3253R 1 January 2013
FABRICATED AUGERSLight to Moderate Ground Conditions
• Fabricated Boring Head • Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
4” $210.00 0 42 10600-3 10601-3 10602-36” $220.00 2 42 10603-3 10604-3 10605-38” $310.00 2 57 10606-3 10607-3 10608-39” $320.00 3 62 10609-3 10610-3 10611-3
10” $340.00 3 69 10612-3 10613-3 10614-312” $355.00 4 78 10615-3 10616-3 10617-315” $470.00 5 87 10618-3 10619-3 10620-316” $500.00 5 93 10621-3 10622-3 10623-318” $525.00 6 106 10624-3 10625-3 10626-320” $610.00 6 134 10627-3 10628-3 10629-324” $720.00 8 153 10630-3 10631-3 10632-330” $920.00 9 208 10633-3 10634-3 10635-336” $1,150.00 11 275 10636-3 10637-3 10638-3
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
4” $215.00 0 42 10600 10601 106026” $229.00 2 46 10603 10604 106058” $330.00 2 78 10606 10607 106089” $342.00 3 85 10609 10610 10611
10” $378.00 3 98 10612 10613 1061412” $390.00 4 115 10615 10616 1061715” $540.00 5 135 10618 10619 1062016” $558.00 5 146 10621 10622 1062318” $630.00 6 170 10624 10625 1062620” $780.00 6 182 10627 10628 1062924” $810.00 8 211 10630 10631 1063230” $1,038.00 9 272 10633 10634 1063536” $1,319.00 11 365 10636 10637 10638
3’ Length Augers
4’ Length Augers- STANDARD
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 7 of 12Form No. 3253R 1 January 2013
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
4” $260.00 0 51 10600-5 10601-5 10602-56” $310.00 2 51 10603-5 10604-5 10605-58” $415.00 2 101 10606-5 10607-5 10608-59” $420.00 3 111 10609-5 10610-5 10611-5
10” $480.00 3 126 10612-5 10613-5 10614-512” $485.00 4 145 10615-5 10616-5 10617-515” $660.00 5 164 10618-5 10619-5 10620-516” $755.00 5 177 10621-5 10622-5 10623-518” $825.00 6 207 10624-5 10625-5 10626-520” $910.00 6 254 10627-5 10628-5 10629-524” $975.00 8 268 10630-5 10631-5 10632-530” $1,475.00 9 445 10633-5 10634-5 10635-536” $1,615.00 11 501 10636-5 10637-5 10638-5
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
4” $290.00 0 60 10600-6 10601-6 10602-66” $400.00 2 60 10603-6 10604-6 10605-68” $485.00 2 128 10606-6 10607-6 10608-69” $500.00 3 141 10609-6 10610-6 10611-6
10” $560.00 3 160 10612-6 10613-6 10614-612” $610.00 4 186 10615-6 10616-6 10617-615” $805.00 5 193 10618-6 10619-6 10620-616” $915.00 5 208 10621-6 10622-6 10623-6
18” $990.00 6 244 10624-6 10625-6 10626-620” $1,135.00 6 296 10627-6 10628-6 10629-624” $1,315.00 8 325 10630-6 10631-6 10632-630” $1,855.00 9 527 10633-6 10634-6 10635-636” $2,095.00 11 615 10636-6 10637-6 10638-6
6’ Length Augers
5’ Length Augers
FABRICATED AUGERSLight to Moderate Ground Conditions
• Fabricated Boring Head • Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 8 of 12Form No. 3253R 1 January 2013
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
6” $348.00 2 48 10657 10658 106598” $499.00 4 83 10660 10661 106629” $540.00 4 89 10663 10664 10665
10” $558.00 4 102 10666 10667 1066812” $576.00 4 117 10669 10670 1067115” $725.00 6 139 10672 10673 1067416” $778.00 6 148 10675 10676 1067718” $854.00 6 168 10678 10679 1068020” $1,190.00 6 231 10681 10682 1068324” $1,226.00 8 210 10684 10685 1068630” $1,567.00 10 280 10687 10688 1068936” $1,832.00 12 376 10690 10691 1069242” $2,628.00 16 460 10693 10694 10695
48” $3,063.00 18 550 10696 10697 10698
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
6” $335.00 2 40 10657-3 10658-3 10659-38” $455.00 4 67 10660-3 10661-3 10662-39” $485.00 4 70 10663-3 10664-3 10665-3
10” $490.00 4 74 10666-3 10667-3 10668-312” $515.00 4 81 10669-3 10670-3 10671-315” $650.00 6 90 10672-3 10673-3 10674-316” $685.00 6 96 10675-3 10676-3 10677-318” $770.00 6 108 10678-3 10679-3 10680-320” $1,035.00 6 122 10681-3 10682-3 10683-324” $1,080.00 8 154 10684-3 10685-3 10686-330” $1,370.00 10 209 10687-3 10688-3 10689-336” $1,495.00 12 276 10690-3 10691-3 10692-342” $2,410.00 16 416 10693-3 10694-3 10695-3
48” $2,775.00 18 306 10696-3 10697-3 10698-3
3’ Length Augers
4’ Length Augers- STANDARD
• Cast Steel Boring Head • Hardened Drive-in Teeth - Std. Incl. Gage Teeth in Outside Positions Chisel Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting
CAST HEAD AUGERSDifficult Ground Conditions
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 9 of 12Form No. 3253R 1 January 2013
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
6” $435.00 2 62 10657-5 10658-5 10659-58” $560.00 4 121 10660-5 10661-5 10662-59” $590.00 4 125 10663-5 10664-5 10665-5
10” $670.00 4 143 10666-5 10667-5 10668-512” $685.00 4 158 10669-5 10670-5 10671-515” $790.00 6 167 10672-5 10673-5 10674-516” $810.00 6 180 10675-5 10676-5 10677-518” $900.00 6 209 10678-5 10679-5 10680-520” $1,235.00 6 241 10681-5 10682-5 10683-524” $1,365.00 8 269 10684-5 10685-5 10686-530” $1,720.00 10 374 10687-5 10688-5 10689-536” $1,915.00 12 502 10690-5 10691-5 10692-542” $3,185.00 16 611 10693-5 10694-5 10695-5
48” $3,910.00 18 765 10696-5 10697-5 10698-5
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
6” $475.00 2 70 10657-6 10658-6 10659-68” $625.00 4 138 10660-6 10661-6 10662-69” $655.00 4 140 10663-6 10664-6 10665-6
10” $700.00 4 146 10666-6 10667-6 10668-612” $715.00 4 189 10669-6 10670-6 10671-615” $870.00 6 196 10672-6 10673-6 10674-616” $1,025.00 6 212 10675-6 10676-6 10677-618” $1,040.00 6 246 10678-6 10679-6 10680-620” $1,375.00 6 284 10681-6 10682-6 10683-624” $1,530.00 8 327 10684-6 10685-6 10686-630” $2,020.00 10 529 10687-6 10688-6 10689-636” $2,235.00 12 616 10690-6 10691-6 10692-642” $4,030.00 16 791 10693-6 10694-6 10695-6
48” $5,385.00 18 994 10696-6 10697-6 10698-6
6’ Length Augers
5’ Length Augers
• Cast Steel Boring Head • Hardened Drive-in Teeth - Std. Incl. Gage Teeth in Outside Positions Chisel Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting
CAST HEAD AUGERSDifficult Ground Conditions
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 10 of 12Form No. 3253R 1 January 2013
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
4.5” $786.00 4 73 10700 10701 107026” $1,177.00 6 66 10703 10704 107057” $1,213.00 8 80 10706 10707 107088” $1,332.00 8 94 10709 10710 107119” $1,351.00 8 103 10712 10713 10714
10” $1,387.00 10 113 10715 10716 1071712” $1,520.00 12 135 10718 10719 1072014” $1,718.00 14 160 10721 10722 1072316” $1,778.00 16 183 10724 10725 1072618” $1,916.00 18 208 10727 10728 1072924” $2,283.00 22 291 10730 10731 1073230” $2,523.00 24 340 10733 10734 1073536” $2,859.00 30 395 10736 10737 10738
4’ Length Augers
BULLET ROCK AUGERSRock, Concrete, Asphalt, and Frozen Ground
Bullet Rock Pilot PN 10758 List Price: $370.00
Bullet Rock ToothPN 10759List Price: $10.25
DIA. LIST PRICE
NO. OF TEETH WT. 2” HEX
PN2-9/16” RD PN
2” RD PN
18”-9” $589.00 7 130 10639 10640 1064124”-12” $781.00 10 186 10642 10643 1064430”-15” $972.00 11 228 10645 10646 1064736”-18” $1,168.00 13 304 10648 10649 10650
4’ Length Augers
TREE AUGERSTree and Shrub Planting
• Fabricated Boring Head • Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions • Hardened Fishtail Point • 5/16” Heavy-Duty Double Flighting
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 11 of 12Form No. 3253R 1 January 2013
VARIABLE LENGTH EXTENSIONS FIXED LENGTH EXTENSIONS
LENGTH LIST PRICE WT. PART
NO.24” $205.00 32 10900
48” $282.00 56 1090172” $367.00 84 10902
LENGTH LIST PRICE WT. PART
NO.12” $148.00 20 10910
24” $180.00 32 10911
48” $252.00 56 1091272” $331.00 84 10913
Variable length auger extensions store inside the column of 10” diameter or larger augers. Extension increments are every 6” on 12” - 24” auger extensions and every 12” on 48” - 72” auger extensions.
Do not use with HP models.
Fixed length auger extensions extend the auger’s digging depth by the length of the extension.
2” Hex 2” Hex
LENGTH LIST PRICE WT. PART
NO.12” $150.00 22 10903
24” $210.00 38 10904
48” $290.00 73 1090572” $385.00 84 10906
2-9/16” Round
LENGTH LIST PRICE WT. PART
NO.24” $150.00 24 10907
48” $210.00 46 1090872” $289.00 66 10909
2” Round
LENGTH LIST PRICE WT. PART
NO.12” $148.00 38 10914
24” $180.00 40 10915
48” $252.00 76 1091672” $349.00 110 10917
2-9/16” Round
LENGTH LIST PRICE WT. PART
NO.24” $139.00 25 10918
48” $193.00 47 1091972” $265.00 68 10920
2” Round
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639
Page 12 of 12Form No. 3253R 1 January 2013
ADAPTERS
DRIVE UNIT
AUGER COLLAR
LIST PRICE WT. PART
NO.2” Hex 2-9/16” Rd. $210.00 18 10921
2” Hex 2” Rd. $193.00 18 109222-9/16” Rd. 2” Hex $127.00 14 109232-9/16” Rd. 2” Rd. $134.00 12 109242” Rd. 2” Hex $115.00 12 109252” Rd. 2-9/16” Rd. $127.00 11 10926
Connect Danuser drive units to other augers or Danuser augers to other drive units.
Price Sheet - PRO Auger Systems www.edneyco.com888.443.3639