RESTRICTED

Prospective AFPR G 131-031

AFP UNIFORM CODE

GENERAL HEADQUARTERS ARMED FORCE

S OF THE PHILIPPINES

RESTRICTED

RESTRICTED

Prospective AFPR G 131-031

AFP UNIFORM CODE

GENERAL HEADQUARTERS

ARMED FORCES OF THE PHILIPPINES (The information contain in this regulation shall not

be communicated, directly or indirectly, to the press or to any person not authorized to receive it.)

RESTRICTED

CHIEF OF STAFF ARMED FORCES OF THE PHILIPPINES Camp General Emilio Aguinaldo, Quezon City

05 May 2005

SUBJECT: Letter of Promulgation TO: All Concerned 1. The AFP Uniform Code was formulated by the Office of the Deputy Chief of Staff for Personnel, J1, GHQ, AFP and the AFP Uniform Board as a ready reference for use of all AFP personnel. The Code was approved on 09 October 2004 by the then Chief of Staff, AFP GEN NARCISO L ABAYA AFP and was declared as Defense Department Circular No. 1 on 14 January 2005 by Defense Secretary Avelino J Cruz Jr. 2. AFP commanders, staff and other personnel who are primarily involved in uniform matters shall ensure that our endeavors are geared towards developing a competent, professional and loyal soldiers committed to serve with excellence. 3. This Code shall be regularly reviewed and updated as necessary. All AFP personnel are therefore enjoined to submit recommendations for the improvement of our soldiers’ uniforms and appearance. 4. This Code is hereby promulgated for the information and guidance of all concerned effective this date.

VICE CHIEF OF STAFF

ARMED FORCES OF THE PHILIPPINES Camp General Emilio Aguinaldo, Quezon City

25 April 2005

F O R E W O R D

The AFP Uniform Code sets forth military uniform policies, rules and regulations for the prescription and proper wearing of AFP uniforms. Its objectives are to provide descriptions of all authorized military uniforms and components, and to establish clear-cut guidance in the use of uniforms to present a respectable image of the AFP. The provisions prescribed herein shall apply to all active military personnel and other authorized persons and shall be treated as AFP Regulations. It shall therefore be the responsibility of all unit commanders/heads of office, personnel officers, Provost Marshals, Inspector Generals, and military police to ensure the widest dissemination of this Code for the understanding and appreciation of all military personnel. All military personnel shall strictly observe all provisions in this Code to make sure that their attire is appropriate and presentable for the given occasion in keeping with the highest standards of military discipline. I encourage all the soldiers and those charged with military uniform matters to send comments and recommendations to the Deputy Chief of Staff for Personnel, J1 to further enhance this Code.

DEPUTY CHIEF OF STAFF

ARMED FORCES OF THE PHILIPPINES Camp General Emilio Aguinaldo, Quezon City

25 April 2005

P R E F A C E

This AFP Uniform Code contains the general and specific provisions obtained from official publications, and various references that address AFP uniform matters to project a united and professional image of the AFP. This Code is therefore published as a basic reference for all military personnel to achieve uniformity in using and wearing authorized AFP uniforms. I enjoin everybody to contribute towards the improvement of this Code by forwarding comments and recommendations to the Office of the Deputy Chief of Staff for Personnel, J1 or the AFP Uniform Board.

DEPUTY CHIEF OF STAFF for PERSONNEL, J1 ARMED FORCES OF THE PHILIPPINES

Camp General Emilio Aguinaldo, Quezon City

25 April 2005 A C K N O W L E D G E M E N T

Inspired by the AFP Human Resource Management 15 – Year Strategic Plan and driven by our unending quest to truly professionalize the military organization, we have deliberately reviewed existing military uniform policies and regulations and compared them with other militaries’ concepts and practices to come out with the first ever AFP Uniform Code. This joint effort by the various uniform boards from the Major Services, selected AFPWSSUs and this Headquarters seeks to provide guidance and direction to all commanders, staff officers and the rank and file on the usage and prescription of military uniforms in order to project a unified, well-disciplined and respectable armed force worthy of our people’s trust and confidence. This Code would not have been realized without the able and sincere leadership of General Narciso L Abaya AFP who provided the initial impetus while still serving as The Deputy Chief of Staff, AFP. Due recognition also goes to Vice Admiral Ariston V Delos Reyes AFP and Major General Edilberto P Adan AFP for their full support in making this project a realization. I also wish to acknowledge the following officers, enlisted personnel and civilian employees who contributed immensely to this project: Rear Admiral Antonio R Siapno AFP, Commodore Emilio C Marayag AFP, Brigadier General Horacio S Tolentino AFP, Colonel Hernanie B Perez PAF (GSC), Colonel Zoilo R Benavidez PA (GSC), Colonel Henry Galarpe PAF (GSC), Colonel Eduardo Sto Domingo PA (GSC), Captain Demetrio B Bidan PN (GSC), Colonel Jose B Vizcarra PA (GSC), Colonel Estela L Yutadco NC (GSC), Colonel Alfredo G Ramirez PAF (GSC), Lieutenant Colonel Jaime U Orsenado PAF (GSC), Lieutenant Colonel Antonio E Endonilla PA, , Lieutenant Colonel Virgilio A Estrella PAF, Lieutenant Colonel Benjamin G Padre PN (M), Commander Amadito L Manzon PN, Major Ricardo D Petrola PN (M), Major Orlando Edralin PA, TSg Joel D Betuing PAF, TSg Zenaida L Otiong PA (WAC), TSg Aeba B Junatas PA (WAC), SSg Aurelio Teodoro Y Suniga Jr PAF, SSg Alexander Y Ellorinco PM, PO3 Joey C Avellano PN, Mrs Carmen F Navarro, Mrs Analisa D Añasco and Mr Alan Ronald G Lamadrid. These personnel unselfishly worked collectively and individually in the conduct of research, discussions, deliberations and attendant actions to finally publish this Code. It has been a very rewarding and fulfilling experience for all of us to see the effort reach its fruition stage.

xi

xii

xiii

AFP UNIFORM CODE

TABLE OF CONTENTS

LETTER OF PROMULGATION i FOREWORD iii PREFACE v ACKNOWLEDGEMENT vii CHAPTER 1 GENERAL POLICIES 1.1 GENERAL 1 1.1.1 Purpose 3 1.1.2 The AFP Uniform Board 3 1.1.3 Definition of Terms 5

1.1.4 Wearing of the Uniform 6 1.1.5 Procedures in Recommendation for Changes

in Military Uniform 9 1.1.6 Responsibilities of DCS for Personnel, J1 10 1.1.7 Responsibilities of DCS for Logistics, J4 11

1.1.8 Responsibilities of TQMG, AFP 12 1.1.9 Responsibilities of the Provost Marshal 12

1.1.10 Responsibilities of Commanders 12 1.1.11 Responsibilities of Personnel Officers 13

1.1.12 Responsibilities of Unit Sergeant Majors and First Sergeants 13

1.1.13 Responsibilities of Military Personnel 13 1.1.14 Alterations 13 1.1.15 Regulation Clothing and Insignia 14

1.1.16 Wearing of Distinctive Shoulder Patches 14 1.2 AUTHORIZED AND OFFICIAL ITEMS OF UNIFORMS 15

1.2.1 General 15 1.2.2 Belts and Buckles 16 1.2.3 Headgears 17 1.2.4 Jackets and Sweaters 18

1.2.5 Coats and Umbrellas 19 1.2.6 Cufflinks and Buttons 20

xiv

1.2.7 Earrings, Necklaces, and Rings 21 1.2.8 Footwear 21

1.2.9 Handbags and Purses 25 1.2.10 Maternity Uniforms 26

1.2.11 Mourning Bands 27 1.2.12 Nameplates and Nametapes or Name Cloths 28

1.2.13 Socks and Hoses 30 1.2.14 Skirts 30

1.2.15 Slacks, Female 31 1.2.16 Undershirts and Undergarments 32 1.2.17 Trousers 33

1.2.18 Suspenders 34 1.2.19 Gloves and Cover Caps 35 1.2.20 Aiguillettes 35 1.2.21 Cummerbunds 38

1.2.22 Sword and Scabbard 38 1.3 INSIGNIA 42 1.3.1 Ranks Insignia 42 1.3.2 Ratings Insignia (Chest) 47 1.3.3 Miniature Insignia 49 1.3.4 List of Occupational Specialty Badge 50 1.3.5 List of Functional / Eligibility Badges 50 1.4 CIVILIAN CLOTHING 51 1.4.1 Wearing of Civilian Clothing 51 1.4.2 Restrictions 53

1.4.3 Civilian Clothes for Military Personnel on Special Duty 54 1.4.4 Wearing Uniform Articles with Civilian Clothes 54

1.4.5 Personnel on Leave and Traveling 55 1.5 GENERAL OFFICE UNIFORMS 55 1.5.1 Prescribed Uniforms 55 1.5.2 Regulations 55 1.5.3 Battle Dress/Field Uniforms 56

1.5.4 Wearing of IDs on Uniform of the Day 58 1.6 BASIC INDIVIDUAL AND ORGANIZATIONAL CLOTHING

AND EQUIPMENT 58 1.6.1 Bag, Duffel 58 1.6.2 Belts and Buckles 58 1.6.3 Headgear 58 1.6.4 Coats 62 1.6.5 Gloves 63 1.6.6 Liners 63 1.6.7 Shirts 63 1.6.8 Sweaters 63 1.6.9 Trunks 64

xv

1.6.10 Raincoats and Ponchos 64 1.6.11 Towels 64 1.6.12 Pouches 64 1.6.13 Canteens and Caps 64 1.6.14 Field Jacket 64 1.6.15 Magazines 65 1.6.16 Shelter Tents 65 1.6.17 Bayonets 65 1.6.18 Backpacks 65 1.6.19 Combat Boots 65 1.6.20 Socks 65 1.6.21 Dog Tags 65 1.6.22 T-Shirts 65 1.6.23 Physical Fitness Uniforms 65 1.7 PERSONAL APPEARANCE AND GROOMING 66 1.7.1 Personal Appearance 66 1.7.2 Grooming, Haircuts, Hairpieces 67 1.7.3 Uniform Appearance, Cuts and Fits 73 1.7.4 Cosmetics 73

1.7.5 Exceptions Based on Religious Practices 73 1.7.6 Wearing of Jewelries 73 1.7.7 Wearing of Sunglasses or Eyeglasses 74 1.7.8 Wearing of Identifications and Tags 74 1.8 RESTRICTIONS ON WEARING UNIFORMS 75 1.8.1 Restriction Policies 75 1.9 OBTAINING MILITARY UNIFORMS 75

1.9.1 Military Supply Item/Standard Issue Clothing 76 1.9.2 Non-Supply System/Optional Clothing 76 1.9.3 Commercial Vendors 76 1.10 MILITARY FEMALE UNIFORM 77 1.11 RELIGIOUS DRESS AND APPEARANCE PRACTICES 78 1.12 RESPONSIBILITY FOR UNIFORM MATTERS 79 1.12.1 General Criteria In the Uniform Recommendations 79

1.12.2 Approving Authority in Uniform Recommendations 80 and Changes

1.12.3 Major Service Commander’s Responsibilities 80 in Uniform Matters

CHAPTER 2 ARMY UNIFORMS 81 2.1 GENERAL 81 2.1.1 Purpose 81 2.1.2 Philippine Army Uniform Board Composition 81 2.2 OFFICIAL AND AUTHORIZED UNIFORMS 82 2.2.1 Formal Dress 82

xvi

2.2.2 Semi-Formal Dress 86 2.2.3 Other Uniforms 93 2.2.4 Authorized Items On Uniforms 100 2.3 UNIFORM ITEMS 103 2.3.1 Headgears and Caps 103 2.3.2 Footwear 106 2.3.3 Belt and Buckle 107 2.4 INSIGNIA AND AWARDS 109 2.4.1 Insignia/Ranks 109

2.4.2 Awards 110 2.5 INDIVIDUAL CLOTHING AND EQUIPMENT 113 2.6 UNIFORM FOR PHILIPPINE ARMY RESERVIST 114 AND ROTC CADETS 2.6.1 Designated Uniforms for Reservist 114 2.6.2 Uniform for ROTC Cadets 115

2.6.3 Items on Uniform 116 2.6.4 Occasions for Wear 117

2.7 CARE AND MARKINGS OF THE UNIFORM 117 2.7.1 Storing 117 2.7.2 Washing/Laundering 117 2.7.3 Ironing 118 2.7.4 Markings 118 2.8 RESTRICTIONS WHEN ON UNIFORM 118 2.9 POLICIES ON ARMY UNIFORMS 119 CHAPTER 3 NAVY UNIFORM 121 3.1 GENERAL GUIDELINES 121 3.1.1 Purpose 122 3.1.2 Officers Off Duty 123 3.1.3 Probationary 123 3.1.4 Civilian Clothing, Officers 123 3.1.5 Retired and Reserve Officers 123 3.1.6 Civilian Clothing, Enlisted Men 124 3.1.7 Uniform of the Day 124 3.1.8 Officer of the Deck 125 3.1.9 Pistol as Sidearm 125

3.1.10 Pins and Jewelry 125 3.1.11 Hair, Beard and Mustache 125

3.1.12 Inspection of Clothing 125 3.1.13 Marine Personnel Serving with Naval Forces 126 3.1.14 Regulation Clothing 126 3.1.15 Transfer or Exchange of Clothing 126 3.1.16 Standard Phraseology 126 3.1.17 Medals, Ribbons and other Decorations 126

xvii

3.1.18 Authorized Non-Military Items on Uniform 128 3.1.19 Personal Appearance and Grooming 129 3.2 OFFICIAL AND AUTHORIZED UNIFORMS 130 3.2.1 Officers Formal Dress Uniform 130 3.2.2 Officers Semi-Formal Dress Uniform 131 3.2.3 Officers Functional Dress Uniform 133

3.2.4 Enlisted Dress Uniform (E-7 To E-9) 135 3.2.5 Enlisted Dress Uniform (E-1 To E-6) 139

3.2.6 PN Distinctive Service General Office Uniform (GOU) for 142 Female Line Personnel

3.2.7 Philippine Marine Corps Uniforms 144 3.3 AUTHORIZED ITEMS AND OCCASIONS 151

FOR WEAR ON UNIFORMS 3.3.1 Navy Officers 151

3.3.2 Navy Enlisted (E-7 to E-9) 153 3.3.3 Navy Enlisted (E-1 to E-6) 155 3.3.4 Marine Officers 157 3.3.5 Enlisted Marines (E-1 to E-9) 161

3.3.6 Headgears and Caps (Officers) 165 3.3.7 Shoes (Footwear) 168 3.3.8 Belts and Buckles 169 3.3.9 Athletic Rubber Shoes (For Officer/CPO and EP) 170 3.4 INSIGNIA AND AWARDS 170

3.4.1 Ranks and Sleeve Markings 170 3.4.2 Rates & Ratings 172 3.4.3 Use of Awards 174

3.4.4 Wearing of Awards and Decorations 174 3.4.5 Command-At-Sea Badge 175 3.4.6 Marine Command Badge 177 3.4.7 Naval Aviation Badges 180 3.4.8 Aircraft Maintenance Officer Badge 182 3.4.9 Aircraft Observer Badge 182 3.4.10 Flight Surgeon Badge 183 3.4.11 Flight Nurse Badge 183 3.4.12 Naval Aircrew Badge 184 3.4.13 UOG / Seal Team Badge 185 3.4.14 Scuba Diver’s Badge 185 3.4.15 Naval Construction Engineers Badge 186 3.4.16 Seabees Badge 187 3.4.17 Philippine Navy Instructor Badges 188 3.4.18 Surface Warfare Operations Badge 191 3.4.19 Marine Enlisted Personnel Badge 192 3.4.20 PN Enlisted Personnel Of The Year Badge 193 3.4.21 PN Civilian Personnel of the Year Badge 193 3.4.22 PN Civilian Supervisor of the Year Badge 194

xviii

3.4.23 Naval Command Staff Course Badge 194 3.4.24 Naval Command General Staff Course Badge 194

3.4.25 Authorized Naval Awards 195 3.4.26 Awards of Societies and other Organizations 195 3.4.27 Decorations, Medals, Ribbons, Lapel Buttons 196

worn on Civilian Clothing 3.4.28 Decorations, Medals, Ribbons, Lapel Buttons 196

worn by Retired or Inactive AFP Personnel 3.4.29 Large and Miniature Medals 196 3.4.30 Medal Box 197 3.4.31 Wearing of Large Medals 197 3.4.32 Wearing of Miniature Medals 197 3.4.33 Wearing of Badges 198 3.4.34 Wearing of Ribbons 198

3.5 UNIFORM FOR RESERVISTS 198 3.5.1 Retired and Reserve Officers 198 3.5.2 Naval ROTC 199 3.6 CARE AND MARKINGS OF UNIFORMS 199

3.6.1 Care 199 3.6.2 Markings 199

3.6.3 Marking of Individual Clothing and Equipment 200 CHAPTER 4 AIR FORCE UNIFORMS 201 4.1 GENERAL POLICIES 201 4.1.1 Concept 201 4.1.2 Purpose 201 4.1.3 Responsibility 202 4.1.4 Philippine Air Force Uniform Board Composition 202 4.2 OFFICIAL AND AUTHORIZED UNIFORMS 202 4.2.1 Formal Dress Uniforms 202 4.2.2 Battle Dress Uniform (BDU) 212 4.2.3 Flight Duty Uniform (FDU) 213 4.2.4 Maintenance Duty Uniform 214 4.2.5 Physical Fitness or Athletic Uniform 214 4.2.6 Military Police Uniform (MPU) 215 4.2.7 Air Force Blue Gala Uniform (AFBGU) 215 4.2.8. Fatigue Duty Uniform 217 4.2.9 Black Coverall 218 4.2.10 Motorcycle Rider Uniform 218

4.2.11 Bikers Uniform 218 4.2.12 Task Force Tulay Uniform 218 4.3 AUTHORIZED ITEMS ON UNIFORMS 219 4.3.1 Mess Jacket 219 4.3.2 White Duck 219

xix

4.3.3 Service Blouse 219 4.3.4 Bush Coat 219 4.3.5 General Office Uniform (GOU) 219 4.3.6 Battle Dress Uniform (BDU) 220 4.3.7 Athletic Uniform 220 4.3.8 Military Police Uniform 220 4.3.9 Air Force Gala Blue 221 4.3.10 Headgears and Caps 221 4.3.11 Footwear 222 4.3.12 Belts and Buckles 223 4.4 INSIGNIA AND AWARDS 224 4.4.1 Ranks 224

4.4.2 Awards 225 4.4.3 Wearing of Large Medals 226 4.4.4 Wearing of Miniature Medals 227

4.5 UNIFORM FOR RESERVIST and ROTC CADETS 227 4.5.1 Designated Uniforms for Reservist 227 4.5.2 Items on Uniforms 228 4.6 RESTRICTION WHEN ON UNIFORM 228 4.7 INDIVIDUAL CLOTHING AND EQUIPMENT 228 4.8 CARE AND MARKINGS OF UNIFORMS 229 4.8.1 Care 229 4.8.2 Markings 229 CHAPTER 5 TECHNICAL AND ADMINISTRATIVE 231

SERVICE UNIFORMS 5.1 GENERAL POLICY 231 5.2 DESIGNATED UNIFORMS AND OCCASIONS FOR 232

THEIR WEAR 5.2.1 Formal Dress Uniform 232 5.2.2 Casual Dress Uniforms 238 5.2.3 Functional Dress Uniform 241 5.2.4 Athletic Uniform 244 5.3 UNIFORM ITEMS 244 5.3.1 Headgears 244 5.3.2 Pershing Cap 245 5.3.3 Black Felt Cap 245 5.3.4 Gray Oversea/Garrison Cap 245 5.3.5 Camouflaged Patrol Cap 245 5.3.6 White Nightingale Cap 245 5.3.7 Raincoat 245 5.3.8 Umbrella 246 5.3.9 Sweater 246

xx

5.3.10 Handbags 246 5.3.11 Nameplates 246 5.3.12 Grade/Rank Insignia 246 5.3.13 Nurse Corps Caduceus 246 5.3.14 Earrings 247 5.3.15 Awards and Decorations 247 5.3.16 Protective Equipment and Clothing 247 5.4 INSIGNIA AND AWARDS 247 5.5 ORGANIZATIONAL CLOTHING AND EQUIPMENT 247 5.6 CARE AND MARKING OF UNIFORMS 247

5.6.1 Care 247 5.6.2 Markings 248 CHAPTER 6 SELECTED AFP WIDE SERVICE SUPPORT UNITS 249

UNIFORMS 6.1 GENERAL POLICIES 249 6.1.1 Purpose 250 6.1.2 Objectives 250 6.2 CADET CORPS ARMED FORCES OF THE PHILIPPINES 250

(CCAFP-PMA) 6.2.1 Brief History 250 6.2.2 Formal Dresses/Ceremonial Uniforms 251 6.2.3 Regular Cadet Uniforms 252 6.2.4 Battle Dress Uniforms/Utility Uniforms 252

6.2.5 Physical Training Uniforms 253 6.2.6 Special Uniforms 253 6.3 PRESIDENTIAL SECURITY GROUP UNIFORMS 254 6.3.1 Background 254 6.3.2 PSG Significant Uniforms 255 6.4 GENERAL HEADQUARTERS AND HEADQUARTERS 258 SERVICE COMMAND, ARMED FORCES OF THE

PHILIPPINES 6.4.1 GHQ and HSC, AFP Gala Gray and White Uniform 258 6.4.2 Miscellaneous Regulation for Wear 260 6.5 INSIGNIA AND AWARDS 261 6.6 ORGANIZATIONAL CLOTHING AND EQUIPMENT 261 6.7 CARE AND MARKING OF UNIFORMS 261 6.7.1 Care 261 6.7.2 Markings 261

xxi

CHAPTER 7 ORGANIZATIONAL CLOTHING AND EQUIPMENT 263

7.1 GENERAL (ORGANIZATIONAL CLOTHING) 263 7.2 INDIVIDUAL CLOTHING 264

7.2.1 Suit, Camouflage, Rip-stop Weave 264 (Battle Dress Uniform)

7.2.2 Battle Dress Uniform, 50-50 Poly-Cotton 264 7.2.3 Philippine Army General Office Uniform 264

(PA GOU) 7.2.4 Philippine Navy General Office Uniform 264

(PN GOU) 7.2.5 Philippine Air Force General Office Uniform 264

(PAF GOU) 7.2.6 T-Shirt, Cotton, Short Sleeves 264 7.2.7 Pants, Short 265 7.2.8 Brief, Poly-Cotton, White/OD 265

7.2.9 Socks, Nylon, Black 265 7.2.10 Socks, Acrylic Nylon 266 7.2.11 Shoes, Rubber, Low Cut 266 7.2.12 Shoes, Rubber, High Cut 266

7.2.13 Shoes, Dress, Black (Clarino) 266 7.2.14 Shoes, Dress, Black, Polyurethane Sole (Lightweight) 267

7.2.15 Boots, Combat (For Field Use Only) 267 7.2.16 Belt, Waist, Web 267 7.3 ARMY UNIFORM CLOTHING AND EQUIPMENT 268

7.3.1 Enlistment Initial Clothing 268 7.3.2 Candidate Officers (OCS) and 269

Candidate Soldiers (CS) 7.3.3 Initial Clothing Allowance (ICA) Male/Female 270 7.3.4 Reenlistment Clothing Allowance (Male) 271 7.3.5 Enlistment Clothing Allowance (Female) 272 7.3.6 Individual Clothing for APC/OCC 273 7.3.7 Individual Equipment for APC/OCC 274 7.4 MARINES UNIFORM CLOTHING AND EQUIPMENT 275 7.4.1 Marines Initial Clothing 275 7.4.2 Marines Authorized Equipment 276 7.5 AIR FORCE ORGANIZATIONAL CLOTHING 277 7.5.1 Initial Clothing Allowance (ICA) Male/Female 277

7.5.2 Individual Equipment (Male/ Female) 277 7.5.3 Enlistment Clothing (Female) 278 7.5.4 Reenlistment Clothing (Female) 278

7.5.5 Authorized Clothing for APC/OCC 279 7.5.6 Air Force Organizational Equipment 280

xxii

CHAPTER 8 AWARDS 281 8.1 GENERAL 281 8.1.1 Purpose 281

8.1.2 Definition of Terms 281 8.1.3 General Policies 284 8.2 DIFFERENT AWARDS AND DECORATIONS 286 8.2.1 Badges and Decorations 288 8.2.2 Command at Sea Badge 293 8.2.3 Command Badge (Philippine Marine Corps) 294 8.2.4 Marksmanship Badge 295 8.2.5 AFP Parachutist Badge (Basic) 295 8.2.6 Inspector General’s Service (IGS) Badge 297 8.2.7 Adjutant General’s Service (AGS) Badge 298 8.2.8 Tanglaw Badge 298 8.2.9 AFP Home Defense Badge 299 8.2.10 Naval Aviation Badge 300 8.2.11 PAF Aviation Badge 302

8.2.12 Avionics/Aircraft Maintenance Officer 303 Specialty Badge

8.2.13 UOG Seal Team Badge 304 8.2.14 UOG/Scuba Diver’s Badge 305 8.2.15 Election Duty Badge 305 8.2.16 Explosive Ordnance Disposal (EOD) Badge 305 8.2.17 Enlisted Personnel Administrative Assistant Course 306 (EPAAC) Badge 8.2.18 Service Medals and Ribbons 306 8.3 AWARDS ORDER OF PRECEDENCE 307 8.3.1 Medal of Valor 307 8.3.2 Distinguished Conduct Star (DCS) 308 8.3.3 Distinguished Service Star (DSS) 308 8.3.4 Gold Cross 309 8.3.5 Philippine Legion of Honor (PLOH) 310 8.3.6 Outstanding Achievement Medal (OAM) 312

8.3.7 Gawad Sa Kaunlaran 312 8.3.8 Kagitingan Sa Barangay 313 8.3.9 Bronze Cross 314 8.3.10 Military Merit Medal 314 8.3.11 Silver Wing Medal 315 8.3.12 Military Commendation Medal 316 8.3.13 Wounded Personnel Medal 316 8.3.14 Military Civic Action Medal 317 8.3.15 Armed Forces Conduct Medal 318 8.3.16 Sagisag ng Ulirang Kawal 318 8.3.17 Long Service Medal 319

xxiii

8.3.18 Anti-Dissidence Campaign Medal and Ribbon 319 8.3.19 Disaster Relief and Rehabilitation Operation Ribbon 320 (DRROR) 8.3.20 Philippine Republic Presidential Unit Citation Badge 320 8.3.21 Distinguished Navy Cross 320

8.4 LARGE AND MINIATURE AWARDS MEDALLIONS 321 8.5 AWARDS OF MILITARY SOCIETIES AND OTHER 321 ORGANIZATION 8.6 MINIATURES 321 8.7 DECORATIONS, MEDALS, RIBBON BARS, AND 322

LAPEL BUTTONS WORN ON CIVILIAN CLOTHING 8.8 WEARING OF MEDALS 323

8.8.1 Medal of Valor 323 8.8.2 Large Medals 323 8.8.3 Wearing Ribbon Bars 323

8.9 WEARING OF BADGES 324 8.9.1 Regulations for Wear 324 8.10 RIBBONS 325

8.10.1 Wearing of Ribbons 325 8.10.2 Ribbons on Women’s Coat 326

CHAPTER 9 CARE AND MARKING OF UNIFORM 327 9.1 CARE OF THE UNIFORM 327

9.1.1 General Policies 327 9.1.2 Service Uniforms 327 9.1.3 General Office Uniforms 328 9.1.4 Battle Dress/Camouflage Uniforms 328 9.1.5 Buttons and Insignia 329 9.1.6 Footwear 329 9.1.7 Undershirts 330 9.1.8 Belts 330 9.1.9 Service Jackets 330 9.1.10 Storing Service Caps 331 9.1.11 Oversea or Garrison Caps 331 9.1.12 Sweaters 331 9.1.13 Maternity Uniforms 331 9.1.14 Sword And Scabbard 331 9.1.15 Preventing Moth Damage 332 9.1.16 Cuts in Cloth 332

9.2 MARKING OF THE UNIFORM 332 9.2.1 General Policies 332 9.2.2 Ownership Markings 333 9.2.3 Locations of Name on Articles 333

xxiv

CHAPTER 10 REQUIRED UNIFORM 335 10.1 GENERAL POLICY 335 10.2 PHILIPPINE ARMY MINIMUM REQUIRED UNIFORMS 335

10.2.1 General Officers (Male/Female) 335 10.2.2 Field Grade Officers (Male/Female) 335 10.2.3 Company Grade Officers (Male/Female) 336 10.2.4 Enlisted Personnel (E-7 to E-9 Male/Female) 336 10.2.5 Enlisted Personnel (E-1 to E-6 Male) 336

10.3 PHILIPPINE NAVY MINIMUM REQUIRED UNIFORMS 336 10.3.1 Flag Officers (Male/Female) 336 10.3.2 Field Grade Officers (Male/Female) 337 10.3.3 Company Grade Officers (Male/Female) 337 10.3.4 Enlisted Personnel (E-7 to E-9 Male) 337 10.3.5 Enlisted Personnel (E-1 to E-6 Male) 338 10.3.6 Enlisted Personnel (E-1 to E-6 Female) 338 10.3.7 Marine Officers 338 10.3.8 Marine Enlisted Personnel 339

10.4 PHILIPPINE AIR FORCE MINIMUM REQUIRED UNIFORMS 340 10.4.1 General Officers (Male) 340

10.4.2 General Officers (Female) 340 10.4.3 Field Grade Officers (O4 to O6) (Male) 340 10.4.4 Field Grade Officers (O4 to O6) (Female) 341 10.4.5 Company Grade Officers (O1 to O3 Male) 341 10.4.6 Company Grade Officers (O1 to O3 Female) 342 10.4.7 Enlisted Personnel (E-7 to E-9 Male/Female) 342 10.4.8 Enlisted Personnel (E-1 to E-6 Male) 342

10.5 TECHNICAL SERVICE MINIMUM REQUIRED UNIFORM 343 10.5.1 General Officers (Male/Female) 343 10.5.2 Field Grade Officers (O4 to O5 Male/Female) 343 10.5.3 Company Grade Officers (O1 to O3 Male/Female) 343 10.5.4 Enlisted Personnel (E-7 to E-9 Male/Female) 344 10.5.5 Enlisted Personnel (E-1 to E-6 Male/Female) 344

ANNEX A (Service Uniforms) 345 ARMY UNIFORMS 345 NAVY UNIFORMS 351 AIR FORCE UNIFORMS 357

TECHNICAL SERVICE UNIFORMS 363 GHQ HSC and PSG UNIFORMS 371 PMA CADET UNIFORMS 377

ANNEX B (Awards) 387 ANNEX C (Service Rank Insignia, Service Equivalent) 397 ANNEX D (Blouse, Dress White (White Duck)/ Service Dress) 399 ANNEX E (General Office Uniforms) 407

xxv

ANNEX F (MP DELINQUENCY REPORT FORM) 413 ANNEX G (Recommendations for Changes) 415 ANNEX H (Record Of Changes) 417 ANNEX I (References) 419 ANNEX J AFP/Major Services Uniform Boards 425

R E S T R I C T E D

R E S T R I C T E D

1

CHAPTER 1

GENERAL POLICIES

“The Army is a uniformed service where discipline is judged, in part, by the

manner in which the individual wears the uniform as prescribed. Therefore, a neat and well-groomed appearance by soldiers is fundamental to the Army and contributes to building the pride and spirit essential to an effective military force.”

1.1 GENERAL POLICIES

1. This Code defines military uniform policies and provides regulations for the usage and prescription of uniform. 2. Commanders may interpret the provisions of this Code to address specific concerns whenever necessary. However, authority for local interpretations does not extend to the institution of policies or practices, which are in contradiction to the provisions of this Code. Exceptions to this policy may only be granted in writing by the Chief of Staff, AFP through the AFP Uniform Board. 3. The military uniform, with appropriate insignia, is designed primarily to show at a glance the branch of service and grade of the individual authorized to wear it. The uniform represents visual evidence of the authority and responsibility vested in the individual. All personnel shall stand at attention at the moment an oath taking takes place. 4. The title “commander”, as used in these regulations, includes those officers titled as Commanding General, Commander, Commanding Officer, Director, Officer-in-Charge, Chief or Head of Offices.

R E S T R I C T E D

R E S T R I C T E D

2

5. When official references are made to the uniform by any person in the Armed Forces, or its official publications, the terms in these regulations will be used. 6. Wearing the uniform should be a matter of personal pride by all military personnel. Military personnel will maintain their uniforms and equipment in a neat and serviceable condition and will, by their appearance, set an example of neatness and strict conformity with these regulations. 7. Component(s) of one uniform will not be worn with components of another except as authorized by these regulations. 8. A commander may authorize military personnel participating in athletics, range instructions, field exercises, and similar activities to wear clothing and equipment other than that prescribed in these regulations only when such activities are held within his/her area of jurisdiction. When inside a camp or base, the camp/base commander shall prescribe the uniform. 9. This Code shall be treated as a set of AFP regulations. Any procedure or component, regarding uniforms not discussed in this Code is prohibited. Violation of the specific provisions and requirements of this Code by military (active and reserve) personnel may result in prosecution under the Articles of War. 10. Applicability. The provisions of this Code apply to all personnel who are authorized to wear the military uniform. It is issued for information and guidance, and requires compliance when wearing military uniforms. This Code is the sole reference for dictating how to correctly wear military uniforms and uniform components. It supersedes all other existing directives on military uniforms. The AFP Uniform Code will be distributed in CD ROM format and will contain revisions and up-dates of the Code. Transition period for the effectivity of this Code shall be six (6) months after publication hereof, hence all military personnel shall be subjected to corrective and disciplinary measure for any violations of the provisions of this Code. Existing uniforms and items of uniforms previously approved but not in accordance with this Code may continue to be used within the six (6) months transition period whence it will become unauthorized. 11. All new members of the AFP shall have at least one set each of all the required service uniforms. The lightweight uniform is recommended.

R E S T R I C T E D

R E S T R I C T E D

3

12. Members in the Armed Forces of the Philippines who have authorized personal decorations, badges, service ribbons and combat patches are encouraged to wear them on the uniform (whenever prescribed). 1.1.1 Purpose The purposes of the AFP Uniform Code are to: (1) provide descriptions of all authorized military uniforms and components; and (2) provide guidance for all military activities prescribing uniform wear in order to present a uniformed image for the whole AFP. 1.1.2 The AFP Uniform Board The Chief of Staff, AFP through the AFP Uniform Board, shall continuously review and implement military uniform matters. Composition, mission, and functions of the AFP Uniform Board are set forth below:

1. Establishment and Organization. The AFP Uniform Board, reports to the Chief of Staff, AFP via The Deputy Chief of Staff, AFP and the Deputy Chief of Staff for Personnel, J1 and assists the CSAFP in discharging his responsibilities on military uniform matters. 2. Composition: a. The Deputy Chief of Staff for Personnel, J1 may recommend to the Chief of Staff, AFP the corresponding composition of the AFP Uniform Board based on the appropriateness of concern on uniform matters. The AFP Uniform Board may convene anytime based on judgment by the designated Chairman, AFP Uniform Board or upon instruction of the Chief of Staff, AFP and the Deputy Chief of Staff for Personnel, J1 in order to deliberate issues on AFP uniform matters. b. The AFP Uniform Board shall consist of the Assistant Deputy Chief of Staff for Personnel (AJ1) as Chairman, the Chairmen of the Major Services’ Uniform Boards, Assistant Deputy Chief of Staff for Logistics (AJ4), Assistant Deputy Chief of Staff for Comptrollership (AJ6), The Provost Marshal General, The Quartermaster General, The Adjutant General, Assistant Inspector General, a female representative from the Technical Services, Military Affairs Branch Chief, Morale and Welfare Division, Office of the Deputy Chief of Staff for Personnel, J1 and the AFP

R E S T R I C T E D

R E S T R I C T E D

4

Sergeant Major as members. The Secretariat will be provided by the Office of Morale and Discipline Division of the Adjutant General’s Office.

c. AFP Working

Committees. The Chairman, AFP Uniform Board is authorized to convene working groups as necessary to perform special functions and studies in carrying out the mission of the AFP Uniform Board.

3. Mission. The mission of the AFP Uniform Board is to advise the CSAFP through J1 in the military uniform policy formulation and oversee the implementation of the AFP Uniform Code and to act or review any matter related to military uniforms where a perceived problem exists or where possible improvements can be made. The AFP Uniform Board will be guided by the uniform goals and policy established by the Secretary of National Defense and the CSAFP. The functions of the Board are to: a. Coordinate matters pertaining to individual clothing. b. Monitor implementation of Uniform Code. c. Review and recommend specification changes concerning design, detail and material of uniform items. d. Coordinate development and testing of proposed uniforms and implementation of approved uniform improvements. e. Monitor procurement, issue, and retail of military uniforms to ensure conformance with uniform regulations. f. Assist in the interpretation of AFP Uniform Regulations. g. Submit individual clothing allowances for CSAFP-approved requirements directly to the Office of the DCS for Personnel, J1 for approval and publication.

R E S T R I C T E D

R E S T R I C T E D

5

h. Maintain close liaison with all the major services and selected AFPWSSUs in all matters concerning uniforms. 4. Policy. Uniform changes shall be kept to a minimum and shall be in consonance with the doctrine, history and traditions of the AFP and other criteria as prescribed herein. A Commander may prescribe the uniform to be worn at special events (e.g., parades, inspection, or any other function he/she desires) during rehearsals only. In no instance shall a Commander authorize the use of non-prescribed uniforms during actual ceremonies without prior clearance from the CSAFP. 5. Other functions: a. In carrying out the responsibilities above, the Chairman, AFP Uniform Board, will - 1) Forward reports and recommendations to the CSAFP via TDCS and J1. 2) Prepare approved changes to AFP Uniform Regulations for inclusion in the Directive CD. 3) Forward recommendations to be considered by the AFP Uniform Board with appropriate comments and recommendations to CSAFP. 1.1.3 Definition of Terms When making official references to the uniforms, insignias, and grooming standards in any official publication, the terms set forth in these regulations shall be used. 1. Basic Uniform Components. Uniform items required as part of the basic uniform. These are the minimum items, which must be worn unless the prescribing authority directs otherwise. 2. Prescribable Items. Uniform items which may be directed or authorized for wear with the basic uniform. Prescribable items may be worn with basic uniforms at the individual’s discretion unless otherwise directed. 3. Optional Items. Uniform items purchased at the wearer’s expense, which may be worn with the basic uniform, but which are not practicable. Optional items may be worn with the basic uniform at the individual’s discretion unless otherwise directed.

R E S T R I C T E D

R E S T R I C T E D

6

4. Conspicuous. Obvious to the eye, attracting attention, striking, bright in color. Should blend with (not stand out from) a professional appearance in uniform. What is conspicuous on one person may not be noticeable on another. If attention is naturally drawn to or distracted from the professional appearance, it is conspicuous. 5. Conservative. Not conspicuous or detracting from the professional appearance while in uniform. 6. Faddish. A style followed for a short period of time with exaggerated zeal. Styles are enduring; fads are generally short in duration and frequently started by an individual or event in the civilian community. Fads are generally conspicuous and detract from a professional appearance. 7. Compliments Skin Tone. A conservative color which contributes to the wearer’s natural skin tone. Conservative colors are generally inconspicuous and do not detract from a professional appearance in uniform. 8. Phase-Out. Discontinue wear.

1.1.4 Wearing of the Uniform

Historically, uniforms have been the product of a soldier’s environment: physical, geographical and technical. Uniforms were provided for protection against the elements or to create distinction among specialist in a growing AFP. Foremost, however, was an element of simplicity providing a uniform that would not interfere with the soldier’s everyday tasks. Women’s uniforms, on the other hand, were designated to duplicate civilian fashion trends. Today’s AFP has narrowed the gap between men’s and women’s career paths. Women now perform many of the same tasks and have the same specialties as their male counterparts. These changes necessitated a more definitive policy to bring the uniforms of both men and women more closely in line with each other. These regulations define the composition of authorized uniforms. Military uniforms are distinctive visual evidence of the authority and responsibility vested on the wearer by the Government. The prescribing authority determines when and where the uniforms prescribed in this Code are appropriate to wear. Uniforms and components shall be worn as described in these regulations. Military personnel must present a proud and professional appearance that will reflect positively on the individual, the AFP and the Philippines.

R E S T R I C T E D

R E S T R I C T E D

7

1. Within the prescribed season, AFP personnel during normal work periods may wear any of the authorized uniforms. 2. For prescribed official functions of a formal or semiformal nature, (e.g., seminars and other functions); the uniform appropriate to the occasion will be worn. 3. Male and female personnel of the AFP may wear coats when prescribed or authorized. 4. Shirts and trousers/skirts or coats and trousers/skirts must match in material, including weight and shade (e.g., do not mix wool and cotton garments). 5. Wearing of civilian clothes is preferred for attendance at unofficial activities off camps, (e.g., service club meetings) unless the individual is representing the AFP in an official capacity. 6. No civilian attire, (e.g., civilian raincoats and jackets/sweaters) will be worn with the military uniform.

7. When walking from point to point while in uniform, it is inappropriate and detracts from military smartness for personnel to be smoking or using tobacco products, or to be eating and/or drinking.

8. Wearing of half-uniform such as trouser without

the prescribed shirt is not allowed. The uniform when worn is always considered as a set and trousers/skirts must always be complemented with the required shirt. 1.1.4.1 Do’s when wearing the uniform: 1. Wear your headgear whenever you go outside the building or office. 2. Men will keep hair neatly groomed and tapered so that it will not fall over the ear or touch the collar. 3. Men will keep sideburns cut no lower than the upper part of the interior ear opening. 4. Men will keep mustache (authorized for medical reasons) trimmed so that it doesn’t extend beyond the edges of the mouth (vertically and horizontally). 5. Men will keep face clean-shaven each day.

R E S T R I C T E D

R E S T R I C T E D

8

6. Keep uniform pressed. 7. Wear a tie/neck tab whenever one wears a long sleeve shirt. 8. Tie the tie with a Windsor knot and fit it properly. 9. Wear your shirt tucked into the pants. Female personnel will wear their shirt’s general office uniform tucked in their skirts or trousers. 10. Wear nametag on the right pocket flap, centered between the top of the button and the top seam of the pocket. Women must wear nametags centered on upper right side of the shirt. 11. Wear (active duty) ribbons and badges with pride on shirts as well as blouse. 12. Keep uniform buttoned and zipped at all times. 13. Polish all brass or wear “stay bright” brass. 14. Wear trousers so that they have no more than a slight break in the front. 15. Wear black socks or neutral shade hose. 16. Wear only black leather or corfam military oxford low quarter shoes (Clariño). 17. Wear the blouse with insignia properly emplaced. 18. Ribbons are centered atop the left pocket or for women centered on the upper left-hand side of the blouse. 19. Badges are centered on each or either pocket 0.30 cm above the top most seam of the pocket if worn without ribbons or 0.30 cm centered above the top most ribbon or other badges. 20. Rank insignia is centered on the right and left shoulder loops and 2.54 cm from the shoulder seam. 21. Military personnel shall wear the authorized web belt with the prescribed Major Service silver buckle.

R E S T R I C T E D

R E S T R I C T E D

9

1.1.4.2 Don’ts when Wearing the Uniform 1. Wear your hat inside offices except when reporting to a senior officer or making a courtesy call on a commander. 2. Carry any bulky items in shirt, blouse or trouser pockets (this includes glasses, cell phones, etc.). 3. Carry pens so that they are exposed especially on shirts and pockets. 4. Wear any part of the uniform unbuttoned or unzipped (shirt, blouse, jacket, or coat). 5. Wear belt buckle or brass that is scratched, tarnished or corroded. 6. Wear uniforms that are frayed. 7. Wear shoes which are unpolished, cracked or worn out. 8. Wear any civilian clothes with the uniform or vice versa. 9. Wear white, blue, green, etc. colored socks. Only black colored socks are correct. 10. Expose fashion necklaces with pendants, wear elegant rings and wristwatches. 11. While in uniform, it is inappropriate and detracts from military smartness for personnel to have their hands in their pockets. 12. Wear uniforms for costume parties and for stage plays. 1.1.5 Procedures in Recommendation for Changes in Military Uniform Procedures in the recommendation for changes in military uniform follow generally the communications in the Chain of Command. However, to be more specific in the procedure, the following steps shall be observed:

R E S T R I C T E D

R E S T R I C T E D

10

1. Unit Commanders shall submit their recommendations to their respective Major Service Commanders (Attn: Ones) who in turn deliberate such recommendations through their respective Major Service Uniform Boards using the guidelines specified in this chapter. 2. The Major Service Uniform Boards then submit its recommendations to their respective Major Service Commanders who in turn forward their own recommendations to the Chief of Staff, AFP (Attn: J1). This recommendation will be transmitted to the AFP Uniform Board, which deliberates on the issue. 3. The Chairman, AFP Uniform Board then recommends the necessary changes to the Chief of Staff, AFP through the Deputy Chief of Staff for Personnel, J1 for approval. 4. All recommendations shall be accompanied by reports on the field-testing of the specific uniform change.

5. Prior to field-testing, however, the Major Service Uniform Boards shall seek the Major Service Commanders request for approval of the testing from the Chief of Staff, AFP. 1.1.6 Responsibilities of DCS for Personnel, J1 The Deputy Chief of Staff for Personnel, J1 through the Chairman, AFP Uniform Board acts as the principal advisor to the Chief of Staff, AFP on all uniform matters, coordinates approval of all clothing allowances, and oversees the development and testing of new and redesigned uniform items. 1.1.6.1 The Chairman, AFP Uniform Board (AFPUB)

The Chairman, AFPUB implements the AFP Chief of Staff’s guidance or “vision” in regard to military uniforms. The Uniform Board functions as advocate for the individual military personnel (user) and develops field concerns (as expressed in official correspondence) into decision issues for the Chief of Staff, AFP. Also, the Chairman, AFPUB supervises the continuous updating of the AFP Uniform Code (AFPUC).

R E S T R I C T E D

R E S T R I C T E D

11

1.1.6.2 Members, AFP Uniform Board The members of the AFPUB provide the necessary assistance to the Chairman, AFP Uniform Board in the execution of his function. They are all responsible in ensuring that necessary recommendations and all other matters pertaining to military uniforms are addressed promptly and fairly. They further ensure that the AFP Uniform Code is updated as necessary as possible through the regular and special board meetings and the conduct of field trips and consultations when warranted.

1.1.7 Responsibilities of DCS for Logistics, J4

The Deputy Chief of Staff for Logistics, J4 addresses problems/inquiries relative to the issue and supply status of standard uniform items, and coordinates to the AFP Logistics Center the supply system and standardization issues. J4 sponsors Individual Clothing Allowance for military personnel. J4 publishes annually the

Individual Clothing Allowances (ICA) for Enlisted Personnel containing all authorized allowances and minimum requirement list. Also, J4 administers Retail Clothing Outlets (RCO), through 72-100 that stock, manage and sell standard issue or “system” items exclusively.

R E S T R I C T E D

R E S T R I C T E D

12

1.1.8 Responsibilities of TQMG, AFP

The Quartermaster General, AFP (TQMG) develops new or redesigned uniform items as directed by the CSAFP through the AFPUB. The TQMG monitors quality control of uniform items through field submission of Quality Deficiency Reports (QDR) and manages the quality control program for optional items.

The clothing designer is responsible for preparation and maintenance of detailed specifications and drawings of all authorized uniform items. Also, TQMG sponsors Technical Manual for Fitting and Alteration, which provides detailed guidance on the correct fitting and repairs of the uniform.

1.1.9 Responsibilities of the Provost Marshal It is the duty of the Provost Marshal to compel all personnel to comply with this Code and be available to teach others the correct wearing of the AFP uniforms. Exemplary military appearance should be the norm for uniformed personnel. It shall be the duty of the Provost Marshal to report all violations in a delinquency report for appropriate corrective measures by concerned individuals’ commanders. 1.1.10 Responsibilities of Commanders The Chief of Staff, AFP exercises jurisdiction on all

uniform matters and is the sole authority in any changes or alterations in the uniform regulations with the recommendations of the AFPUB. All commanders shall see to it that command principle is adhered to by all military personnel in the administration, implementation, and imposing corrective actions for violations of this regulation.

R E S T R I C T E D

R E S T R I C T E D

13

1.1.11 Responsibilities of Personnel Officers All personnel officers shall implement guidelines and provisions aimed at ensuring that this Code is accessible, read and understood by all personnel under their authority. They shall exercise disciplinary matters in the implementation of these regulations as necessary in the absence of the Provost Marshall personnel and according to the articles of war. 1.1.12 Responsibilities of Unit Sergeant Majors and First Sergeants Apart from assisting their respective unit commanders in promoting the welfare of their fellow enlisted personnel, Units’ Sergeant Majors and First Sergeants shall comparably exercise their authority in adhering to this Code, ensuring compliances thereof, and setting an example of smartness and pride in wearing the military uniform. They shall also make themselves available in teaching others on uniform matters and correcting violators of this Code. 1.1.13 Responsibilities of Military Personnel 1. Those who wear the military uniform shall observe strictly regulations on military uniforms and requirements. Military personnel must ensure that their dress or personal appearance is appropriate for the occasion and conforms to required standards. 2. Washing, dry cleaning, alterations, and repairs are the member’s responsibility. Any unusual wear and tear, damage, or loss of various articles may result in out-of-pocket costs. 3. Military personnel are prohibited from disposing military uniforms for civilian use by donating or selling. 1.1.14 Alterations 1. Alterations to uniform clothing to improve fit are authorized; provided such alterations will not change the intended appearance or function of the garment as designed. 2. Care should be taken when contracting alteration services from a commercial vendor so that unauthorized or unneeded alteration procedures are not included in the contract. Uniforms are designed so as to minimize alteration costs. Reports of an excessive number of fitting sessions are an indication that there may be problems with the alteration process.

R E S T R I C T E D

R E S T R I C T E D

14

3. Commanders will ensure that all alterations conform to the spirit and intent of these regulations. Every effort will be made to ensure that proper tailoring facilities are available to all personnel of the command. Personnel will be advised that alterations performed at other than designated military tailoring establishments will be the individual’s responsibility and will conform strictly to these regulations. 4. Wearing improperly altered uniform clothing is prohibited. 1.1.15 Regulation Clothing and Insignia 1. Label. Uniform clothing, equipment and accessories issued or sold through the Military Supply System are regulations and will be labeled. 2. Certification. All other uniform components and accessories will conform to the specifications for regulation items. The purchaser is responsible for ensuring that each garment meets approved specifications. All articles issued to military personnel must conform to the standard sample and its specification. 3. No deviation from the approved specifications is allowed without specific authorization of the CSAFP as recommended by the AFPUB and endorsed by DCS for Personnel, J1.

1.1.16 Wearing of Distinctive Shoulder Patches 1. AFP personnel may wear their distinctive service or unit patches as prescribed in this Code. No patch will be worn on the overcoat. The right sleeve shall be reserved for the patching of the national flag when directed. a. National Flag: 1) The national flag patch will be sewn on the upper right arm sleeve five (5) centimeters from the seam of the shoulder. The national flag patch when worn on the right arm sleeve shall appear horizontally inverted such that the triangle will be pointing to the rear.

7.50 cm

Philippine FlagLeft Sleeve Right Sleeve

5 cm

R E S T R I C T E D

R E S T R I C T E D

15

2) The Philippine Flag measuring 5 cm by 7.50 cm, embroidered flat and plain finish type, shall be sewn when directed on the right arm sleeve of the Battle Dress Uniform when deployed outside the country as part of a coalition with other nations for combined operations or training exercises. 3) The national flag, however, will be sewn on the upper left arm sleeve in case of deployment with the United Nations.

b. Unit Patches: 1) The Major Service patch will be sewn on the upper left arm 5 cm from the seam of the shoulder. 2) The unit patch of Unified Commands, Division to Battalion level, will be sewn centered on the left pocket. 1.2 AUTHORIZED AND OFFICIAL ITEMS OF UNIFORMS

1.2.1 General All uniforms and uniform items are standard as sold/issued through the Military Supply System. Items sold through the Military Supply System or approved commercial sources are considered standard if properly labeled as described. Uniform items that are not approved as conforming to AFP specifications are not authorized for wear and cannot be used to satisfy minimum requirements, except as otherwise stated in this Code. Detailed descriptions are omitted from this chapter for uniform items, which are issued/sold through the Military Supply System and are standard for military personnel. Brief descriptions are provided for official

National Flag (Left Sleeve)

United Nations Patch

Camouflage Shirt

Cloth Rank Insignia

R E S T R I C T E D

R E S T R I C T E D

16

20 cm

and optional items that are sold through other means bearing AFP approval identification. The Quartermaster General, AFP shall provide the uniforms and items’ specifications in separate publications from this Code. Female personnel and staff NCO’s may continue to wear uniforms purchased under previous authorization from non-approved sources until these uniforms require replacement. These items may be used to satisfy minimum requirements.

1.2.2 Belts and Buckles 1. Belts for all uniforms will be worn at the natural waistline with the right edge of the buckle (wearer’s right) in line with the edge of the fly or coat front. 2. Belts for all men’s service coats must match the color and material of the uniform with which they are worn. The buckle will cover the bottom button of the coat. The belt’s tapered end will pass through the buckle to the wearer’s left and will be held in place by a cloth keeper 1.3 cm wide and may be fitted with a snap fastener to secure the belt point more or less 20 cm from the buckle. Buckles will be kept highly polished at all times. 3. The 3.1 cm wide green, khaki or black web belt with the prescribed service buckle will be worn by all military personnel with the Utility (camouflage) and General Office Uniform. Military personnel will wear the green, khaki or black web belt with the service and dress trousers and it may be worn with the white dress trousers. The tip end of the web belt will pass through the buckle to the wearer’s left and will extend about 5 cm beyond the buckle’s center. The metal belt tip and the buckle will be kept highly polished. The buckle will be worn with the buckle tongue depressed into the buckle.

4. The optional white nylon web belt with buckle may be worn by men only with the white dress trousers.

Service and Bush Coats GOU and BDU

5 cm

R E S T R I C T E D

R E S T R I C T E D

17

5. Buckles for all military personnel shall be silver colored with appropriate Major Service seal engraved and centered at the front surface. Buckles for the Technical and Administrative Services shall have their respective service seals at the front surface. Buckles for the Administration and Technical Services shall have their respective service seal at the front surface.

1.2.3 Headgears 1. General. The cap/hat is an integral part of the uniform. Uniform headgear is required to be worn when on specific duties or on ceremonial occasions specified by the commanding officer or higher authority. 2. Outdoor Wear. When outdoors, personnel remain covered at all times unless ordered to uncover, or during religious services not associated with a military ceremony. Personnel remain covered during invocations or other religious military ceremonies such as changes of command, ships’ commissioning and launchings, and military burials, etc. The Chaplain conducting the religious ceremony will guide participants following the customs of his church. 3. Indoor Wear. When indoor, personnel shall remain uncovered at all times unless directed otherwise by higher authority for a special situation/event. Those service members in a duty status and wearing side arms or a pistol belt may only remove headgear indoors when entering a messing or dining area. 4. Special Circumstances. A military cover may be removed when riding a bicycle on or off base. A safety helmet is recommended. Personnel may remove their cap or hat when traveling inside a private automobile or riding a bicycle off base. A cover is mandatory when entering or within a military camp or reservation, unless wearing the cap is impractical or hazardous. Military issued Kevlar or helmet liner shall not be used a substitute to required safety helmet

Army Service Buckle

Air Force Service Buckle

Navy Service Buckle

R E S T R I C T E D

R E S T R I C T E D

18

1.2.4 Jackets and Sweaters

1. Officers’ Jackets

a. Male. The jacket is a

round shell design made of Major Service broadcloth and textile color, fully lined with rayon lining

material, including the collar. Front collar edges of the jacket are pointed as in the GOU’s collar. The jacket, which is usually worn open, extends at the sides to the points of the hipbones, and then curves slightly to the front and at center of the back. It has a standing collar, about 4 cm high, finished all around, and provided with zipper closures. Sleeve flat cuff will be snap button closed. Jackets shall be worn as needed or when prescribed in certain occasions.

b. Female. The jacket is of major service colored polyester-wool tropical fabric the same as that of their male counterparts. The jacket is semi formfitting, waist length, plain shoulder straps upon which embroidered insignia of grade will be worn, and sleeve flat cuff and snap close button. Front collar edges of the jacket are rounded as in their office uniforms. 2. Staff Non-Commissioned Officers’ Jackets a. Male. The jacket is made of major service fabric and textile color. The jacket, with rolled collar and peak cuffs, is worn open, held together at the bottom with two small uniform snap buttons. It is basically the same as that of the officers except that it does not have a shoulder strap for cloth loop rank insignia. The embroidered rank chevrons are sewn on the jacket shoulder sleeves in the same manner as that of their General Office Uniforms. b. Female. The jacket is of major service polyester-wool tropical fabric the same as that of their male counterparts. The jacket is semi formfitting, waist length, peaked cuffs, but without shoulder straps. Front collar edges of the jacket are rounded as in their GOUs. The rank chevrons are sewn on the jacket shoulder sleeves in the same manner as that of their General Office Uniforms.

Officers’ Jacket

R E S T R I C T E D

R E S T R I C T E D

19

3. The Service Sweater The Service Sweater may be worn at the individual’s option as a component of the service uniforms and worn as the uniform of the day, unless the commander determines that the service jacket uniform is more appropriate. Commanders may prescribe the service uniform with sweater for inspections; however, this uniform will not be worn for ceremonial formations or parades on or off the military installation. The service uniform with sweater may be worn on leave or liberty. The sweater shall be made of 100 % polyester wool type material with major service texture color usually olive drab for the Army and Marines, Navy (dark) blue for the Navy, blue for the Air Force and dark gray for the Technical and Administration Service officers. The sweater shall have padding on the shoulders and the elbow part. The Army, Air Force and Technical and Administration Service sweater will be provided with shoulder strap for the cloth rank insignia.

1.2.5 Coats and Umbrellas 1.2.5.1 Coats. Coats if available shall be worn as deemed appropriate and prescribed. The cuts, shape, textile, materials, and colors of which shall be in accordance with the specifications by the Major Services through the Quartermaster. 1.2.5.2 Umbrellas Military personnel may carry an all-black, plain standard or collapsible umbrella at the individual’s option during inclement weather with the service and dress uniforms. Female personnel however may use them as protection from the sun during ordinary days. It will be carried in the left hand so that the hand salute can be properly rendered.

Shoulder Patches

Elbow Patches

Front View Rear View

Shoulder Strap (for Cloth Rank Insignia)

R E S T R I C T E D

R E S T R I C T E D

20

Umbrellas may not be used/carried in formation nor will they be carried with the utility uniform. 1. Description. Plain, solid black, collapsible (in length) umbrella. Use of colored umbrella other than black or with designs or prints is prohibited. 2. Correct Wear. May be carried when weather conditions warrant, provided safety regulations or practices are not violated. 1.2.6 Cufflinks and Buttons 1.2.6.1 Cuff Links Sets 1. The officer or SNCO gold service cuff links set (may include matching tie clasp) will be worn with the French cuff khaki/green/white shirt.

2. The dress cuff links and studs sets will be plain gold or gold-plated, of concave design. Cuff links and stud will be worn with evening dress uniforms and dress uniform. Cuff links that are commercially available may be worn provided they are conservative in style and must conform as much as possible to the regulations prescribed in this Code.

1.2.6.2 Buttons, Insignia 1. The coat of arms should be embossed in clean relief on a convex horizontal alley line surface of the button, which is 2.3 cm in diameter for the big button and 1.5 cm in diameter for the small button. There is no distinction of color of the coat of arms, which has the same color and material used for the button. It shall be gilt, brass or bronze. 2. Gold metal buttons are small (22-line) or large (40-line), and will be worn on the dress uniforms.

Dress Cuff Links Set

R E S T R I C T E D

R E S T R I C T E D

21

3. Only the personnel of the

Air Force are authorized to wear the silvered metal buttons.

1.2.7 Earrings, Necklaces, and Rings 1. Female military personnel may wear earrings with the service and dress uniforms at the individual’s option, according to the following regulations: a. Small, polished, yellow gold color, ball, or round stud earrings, (post, screw-on, or clip), not to exceed six millimeters (about 1/4 inch) in diameter, may be worn with the service, dress, mess dress, and dress white uniforms. b. Small white pearl or pearl-like earrings (post, screw-on, or clip), not to exceed 6 mm (about 1/4 inch) in diameter, shall be worn with evening dress uniforms and with the dress uniforms when worn for social events. 2. When worn, earrings will fit tightly against and will not extend below the earlobe. Only one earring will be worn or in each earlobe. 3. Earrings will not be worn with the utility uniform, nor will they be worn in formation, or while participating in a parade, ceremony, or other similar military functions. 4. Necklaces may be allowed but should not be visible when wearing any uniform. 5. Rings are limited only to the wedding ring and school/class ring. Rings of other kinds should be as conservative as the wedding ring. 1.2.8 Footwear 1.2.8.1 General 1. All military personnel may purchase and wear approved commercial black leather and synthetic leather shoes in semi-gloss or high gloss (patent) finishes on an optional basis. These shoes may

AFP Gilt Buttons

R E S T R I C T E D

R E S T R I C T E D

22

be used to satisfy minimum requirements. Chukka boots are authorized for male officers and SCNO’s only. 2. Double/platform soles or heels or metal heel or toe plates are prohibited. 3. All military personnel may wear clear, smoky gray, or black zipper-closure overshoes or rubbers of plain design with the uniform during inclement weather. In addition, women may wear plain black boots, which do not extend above the knee. Women’s boots with a one-piece sole/heel construction in flat or wedge style may be worn; however, platform soles are prohibited. If boots with separate heels are worn, the heel dimensions will conform to those prescribed for women’s oxfords/pumps. Soles and heels must be black and lining will be inconspicuous. These items will not be worn indoors. 1.2.8.2 Male Dress Shoes

Officer’s black dress shoes will be either oxford or chukka boots in style. Dress shoes are either in a high gloss patent style (Gibson Light type) or the usual standard black thick leather skin type plain finished without ornamental designs and provided they are worn highly polished.

1.2.8.3 Female Dress Shoes 1. All pumps will be of conservative cut with closed toes and heel without ornamental stitching or seams. 2. Fabric pumps will be worn with evening dress uniforms. Heels will measure from 2.50 cm to 6.4 cm in height. The base of the heel will measure from 1 cm by 1 cm to 3.2 cm by 3.8 cm.

Gibson Light type

R E S T R I C T E D

R E S T R I C T E D

23

3. Black pumps (except evening dress) will be smooth leather or synthetic leather. Any elastic binding around the throat of the pump will match the color of the shoe. Heels will measure from 2.5 cm to 6.4 cm in height. The base of the heel will measure from 1 cm by 1 cm to 3.20 cm by 3.8 cm. 4. Black dress flats are authorized for optional purchase and wear with dress and service uniforms instead of black pumps or oxfords under certain conditions. The flats will not be used to satisfy minimum requirements for either the black pumps or oxfords. Black dress flats worn under this authority will be of smooth leather or synthetic leather, with the same general appearance standards as pumps. They will have a maximum heel height of 2.2 cm. The flats will have heels, which are separate and distinct from the sole of the shoe; “wedged” heels are prohibited. 5. Black pump shoes will be worn with the dress, service and maternity uniforms per the following guidance: a. When the skirt is worn as part of the Major Service dress, or service uniform, black pump shoes will be worn. 1) If the skirt is worn for drill, parades, and other occasions, which require functional uniformity, black flat shoes will be the prescribed footwear. 2) Black pump shoes will be worn with the dress or service uniforms with skirt for formal occasions. However, flats may be worn by those engaged in ceremonial details on such occasions. 3) Black pump shoes are authorized for wear when a duty involves prolonged walking or standing, when pumps are considered unsafe, when prescribed for medical reasons, or when otherwise deemed appropriate by the commander. However, low-heeled pumps or flats are encouraged when skirts are worn for duties involving moderate walking or standing.

Female Black Pumps

R E S T R I C T E D

R E S T R I C T E D

24

b. When slacks are worn as part of the dress or service uniform, black pumps shoes 6.4 cm in height will be worn for all occasions. Either dark hose or black socks will be worn at the individual’s option. c. When the maternity service uniform with skirt or slacks is worn, black pump shoes 4 cm in height, or flats will be worn.

1.2.8.4 Combat Boots The standard black leather or black hot weather tropical (jungle) combat boots for wear with the utility uniform will be prescribed as issued/sold through the Military Supply System (72-100). Old style black combat boots (with eyelet lacing) or green hot weather tropical (jungle) boots may also be worn until replacement is required. Unless otherwise prescribed by the commander, either the black/green hot weather tropical or black leather combat boots will be worn at the individual’s option. When uniformity is required, commanders may prescribe the wear of the black leather combat boots. Optional combat boots may be worn per the following guidance: 1. All military personnel may purchase optional commercially available black leather or black hot weather tropical (jungle) combat boots from any source provided they meet criteria set forth in the following paragraph. These items will not be used to satisfy minimum requirements. These boots may be worn at the option of the individual wearer. Combat boots are prescribed/authorized for wear, except that commanders may require the wear of the standard issue boots on specific occasions when uniformity is required, i.e., inspections, parades, ceremonies. 2. An approval process has been instituted to ensure that optional combat boots worn meet appearance standards and are functional combat boots. Military personnel who purchased boots prior to the establishment of the approval process may continue to wear these boots provided they meet the following criteria: a. All optional boots will meet the following general appearance standards. The boots will be all-black leather or, for hot weather boots, all-black leather with black fabric uppers. Boots with a patent leather or glossy finish are not authorized. Speed laces or eyelet lacing is acceptable. The total height of the boots will be from 8 to 12 inches. Lining, insulation, or padding is optional.

R E S T R I C T E D

R E S T R I C T E D

25

b. Boots worn under this authority will be functional and suitable for combat and field wear. Examples of boots, which do not meet these criteria, are lightweight hiking shoes/boots based on running shoe’s latest technology, boots with patent leather and/or zippers, or boots made entirely of canvas and rubber, boots designed for police and SWAT use in urban areas are not acceptable combat boots because they are not suited for load bearing in rough terrain.

1.2.9 Handbags and Purses

1. Women may purchase optional handbags from commercial sources provided they conform to following guidelines: a. The handbag must be made either of calfskin or kid black leather. b. The handbag will be of rectangular design with a flap. The handbag may not have any visible ornamentation, decorative stitching, embossed design, or manufacturer’s logo. The handbag will not be any smaller than 30 cm wide, 18 cm high, and 5 cm thick nor will it be larger than 30 cm wide, 20 cm high, and 9 cm thick. It is provided with 2.5 cm width adjustable strap. c. The strap may be removable or non-removable and may have a black-coated buckle. It will be of the same material as the purse and no part of the strap will be of chain. The strap will be of sufficient length to allow the handbag to be carried properly. 2. The handbag may be carried at the individual’s option with the service dress uniforms. The handbag will not be carried in formation or when the utility or maternity work uniform is worn. 3. The handbag will be carried either over the left shoulder or left arm. The strap will be adjusted so that the bottom of the handbag will be near the bottom of the uniform coat. When carried over the left arm the strap will be adjusted to its shortest length. 4. Officers will procure a clutch purse(s) to wear with dress uniforms. The basic black clutch purse with fabric slip-on covers purchased from commercial sources may be used with appropriate dress uniforms. The clutch purse will be plain, unadorned, rectangular, and will measure 25.4 cm wide, 14 cm high, and 8.08 cm thick. 5. A white clutch purse will be carried when the white service or dress uniform is worn. A black clutch purse (or purse with black slip-on fabric cover) will be carried with evening dress uniforms, and may be

R E S T R I C T E D

R E S T R I C T E D

26

carried with the officer’s service dress uniforms when worn in lieu of the evening dress uniform.

Female Handbag

1.2.10 Maternity Uniforms

The appropriate maternity uniform will be worn as the uniform of the day by pregnant women.

1. Maternity uniform will be worn by pregnant

military personnel when the local commander determines that the standard uniforms can no longer be worn. Either the maternity service uniform or the maternity camouflage work uniform, as appropriate, will be worn as authorized herein.

2. The maternity service uniform consists of tunic

top, skirt or slacks, and long or short sleeve maternity shirt. Either the skirt or slacks may be worn at the individual’s option. This uniform may be worn on leave/liberty under the same conditions as the standard service uniform.

3. The maternity camouflage work uniform consists

of a coat and slacks fabricated of 100 percent rip-stop fabric in the woodland camouflage pattern. This uniform is authorized for wear by pregnant military personnel who are required to wear the utility uniform in the performance of their duties. The work uniform will be worn under the same general regulations as the standard utility uniform except that the web belt will not be worn.

4. Name/service tapes or cloth will be worn on the

maternity work uniform with the top of the tapes placed approximately on line with the second button hole from the top of the coat. Placement of the tapes

Front Right Side Rear Left Side

R E S T R I C T E D

R E S T R I C T E D

27

may be adjusted to the individual as necessary to ensure proper appearance and comfort. Each tape will be of the same length, not to exceed 15.24 cm.

5. When the maternity service uniform with skirt is

worn, pumps, or flats with skin tone hose will be worn. Oxfords, with either dark hose or black socks at the individual’s option, will be worn with service slacks. The maternity camouflage work uniform will be worn with green or black hot weather tropical or black leather combat boots and cushion sole socks.

6. Unless otherwise prescribed, other uniform items

(i.e., headgear, scarf, gloves, handbag) not specifically addressed will be worn with maternity uniforms when and as prescribed by current regulations for wear with service or utility uniforms, as applicable. The service sweater and jacket are not authorized with maternity uniforms. 1.2.11 Mourning Bands The band is 7.7 cm wide and made of crepe, long enough to fit around the arm. When wearing the sword, officers also wear a mourning badge 7.7 cm wide and 51 cm long, knotted in the middle at the sword hilt. 1. Officers will only wear mourning bands approved for use. Military personnel will only wear mourning bands issued as organizational clothing through the Military Supply System (72-100). 2. Military personnel will wear mourning bands when serving as an honorary pallbearer at military funerals in an official capacity, and at such times as prescribed by competent authority. Military personnel shall not wear mourning bands to display a protest inside military camps especially after the period of mourning. 3. When directed by competent authority, military personnel will wear mourning bands while stationed in or undergoing a period of national mourning. 4. Mourning bands may be worn for family mourning. 5. The mourning band will be worn by officers on the left sleeve of the outer garment, midway between the shoulder and elbow. Enlisted personnel will wear the mourning band on the right sleeve of the outer garment, halfway between the shoulder and the elbow.

R E S T R I C T E D

R E S T R I C T E D

28

1.2.12 Nameplates and Nametapes or Name Cloths 1.2.12.1 Nameplates 1. The nameplate is made of black plastic material, laminated with white borderline slightly slanted edge about 45 degrees and 2.0 mm thick. It shall be 77 mm in length and 22 mm high with 8 mm white Arial font size 32 letter engraved over the plate. Only the surname will appear on the plate. 2. It shall be worn with the plate centered and between the top seam of the right pocket edge and the right pocket button. 3. Symbols, initials, nickname, or organizational identification will not be placed on the nameplates. Wearing nameplates that do not conform with these provisions, except as noted above, is prohibited. 4. A nameplate will not be worn on the women’s white shirt. Nameplates will not be worn on leave or liberty, but may be worn on off-base events when prescribed by the local commander. 5. The nameplate will be centered in the same general position on the uniforms that do not have pockets. On the women’s service coat with slanted pockets, a horizontal line tangent to the highest point of the pocket will be considered the top of the pocket. Font Size: Arial 32 Black Background/White Borderlines and Font

PETROLA8 mm 20 mm

77 mm

2 mm

1.5 mm

R E S T R I C T E D

R E S T R I C T E D

29

1.2.12.2 Name and Service Cloth

1. Name and service cloth will be worn on the

battle dress or utility camouflage uniforms and maternity camouflage work uniform. They will be of olive green cotton cloth, 2.54 cm or 1 inch wide, with embroidered 1.9 cm or ¾ inch black lettering. If necessary to accommodate longer names, the lettering may be in condensed print, 1.3 cm or ½ inch high. Name cloth will include the individual’s last name only in upper case letters. Service tapes or cloths will be inscribed with “ARMY”, “NAVY”, or “AIR FORCE” in upper case letters 1.90 cm high. 2. Name and service tapes or cloths for BDU utility coats will be long enough to align with the edges of the pocket flaps when the ends of the tapes are turned under and stitched down. Scarves shall not be worn as part of the daily utility uniform, during parades, and whenever uniformity is prescribed.

Name tape/cloth Service tape/cloth placement

Placement of Nameplate

Camouflage Utility Coat

Cloth Rank Insignia

Uniform Size Label

* Nameplate centered on the flap of right pocket * For female uniforms without pockets, the nameplate shall be place in the same general position as that of uniforms with pocket.

* The Philippine tape shall replace the service tape when serving with the United Nations.

R E S T R I C T E D

R E S T R I C T E D

30

1.2.13 Socks and Hoses 1. Black dress socks will be plain, without ornamental stitching. Calf-length, black socks of plain design maybe worn as an optional uniform item and may be used to satisfy minimum requirements. 2. Men will wear black dress socks with all service and dress uniforms, except that white socks will be worn by officers with white shoes. Women may wear black socks when slacks are worn. 3. Black cushion sole socks will be standard as issued and will be worn with the utility camouflage uniform and whenever combat boots are worn. Green cushion sole socks may continue to be worn until replacement is required. 4. Women will wear full-length nylon hose with service and dress uniform skirts. Dark hose or black socks will be worn with slacks as prescribed. 5. Hose should harmonize with the natural skin tone of the individual. Dark nylon hose of gray/smoky shades will be worn with Major Service dress and evening dress uniforms on formal occasions. 6. Hose with seams, designs, pronounced openwork mesh, or fancy heels are not authorized. Snag-proof, run-resistant hose of an inconspicuous mesh may be worn.

1.2.14 Skirts 1. Skirts will be of conventional length and shape appropriate to the appearance of the uniform and the individual. Service and dress uniforms skirts will be knee length. Skirt for Service Dress Whites is 7.5 below the knee. Skirt for Evening Dress is ankle length. 2. Skirts will have a hem or facing from 5 cm to 7.5 cm wide and the seams will be pressed open and flat. 3. The evening dress skirt will be of black polyester-wool tropical material, floor length with center back pleat and fully lined with black rayon lining. The short evening dress skirt will be the same material as the long skirt but will be knee length. The long black skirt will always be worn with the officer’s evening dress uniform. Either the long or short black skirt may be worn with all other officers and SNCO evening dress uniforms, depending on the degree of formality required. The old-style long skirt (without center back pleat) may continue to be worn until replacement is required.

R E S T R I C T E D

R E S T R I C T E D

31

4. Skirts must fit snugly around the waist and the hips, one piece - pencil cut with overlapping back slit and zipper back closure. It has secret side pockets but no back pockets. Service side pipes will be per major service regulation.

1.2.15 Slacks, Female 1. General

a. Slacks will be long enough to break slightly over the shoe in front and to reach the juncture of the welt of the shoe in the rear. A variation of 1.3 cm above the welt is acceptable. The hem on the slacks will be from 5 cm to 7.5 cm wide.

b. Slacks will be pressed to present a smooth vertical crease at about the center front and rear of each leg. The crease will extend from the bottom of the hem to about 5 cm above the crotch. 2. Service Slacks. Slacks may be worn as part of the service uniform. Wearing the service slacks as a working uniform is allowed for some occasions. On specific occasions that require uniformity (i.e.. formations, ceremonies, inspections, parades, social events), commanders at their discretion may direct either the skirt or slacks be worn. Slacks are authorized for wear on leave/liberty.

a. Slacks may be prescribed only for those women required to possess them or who purchase slacks at their option.

Rear ViewFront View Right Side View

Knee Length Skirt

R E S T R I C T E D

R E S T R I C T E D

32

b. Mixed wear of slacks and skirts by women in ceremonial functions, inspections, parades and other ceremonies is not authorized.

3. White Dress Slacks. At commands where the white

dress uniform is authorized, commanders may prescribe the wear of either the white skirt or white slacks. Women will not be required to wear white slacks unless they have been provided with them by the command. 1.2.16 Undershirts and Undergarments 1.2.16.1 Undershirts a. Standard undershirts (white/ green) will be made of cotton with quarter length sleeves and round neck. White V-neck undershirts are optional and are not to be worn as standard undershirt. b. The white round crew-neck undershirt is authorized with men’s service and dress uniforms. Whether the V-neck or crew-neck undershirt is worn is at the individual’s option except that the crew-neck undershirt will be worn at such times when uniformity is considered essential such as at formations, ceremonies, or parades. c. The only undershirt authorized for wear with the BDU or utility uniform is olive green round crew-neck undershirt. Wearing the undershirt with the utility uniform is at the individual’s option, except that the undershirt will be worn when the BDU utility coat is removed. An undershirt may be required by the commander at such times when uniformity is considered essential such as formations, ceremonies, or parades. 1.2.16.2 Drawers/Briefs The standard drawers (boxer or jockey style) are made of plain white cotton. White drawers (same style/design as the standard drawers), as sold through commercial sources, may be purchased, worn and used to satisfy minimum requirements. 1.2.16.3 Undergarments (Female) Female personnel will wear adequate undergarments, (e.g., slip, bra, camisole, girdle, etc.) to ensure the proper fit, appearance, and opaqueness of the uniform. Undergarments will be worn so that they are not conspicuously visible. Undergarments shall be as conservative as possible.

R E S T R I C T E D

R E S T R I C T E D

33

1.2.17 Trousers

1. General a. Service and dress trousers will be full cut, straight hanging, zipper fly front, and without cuffs. Trouser legs will provide easy fit and will be long enough to break slightly over the shoe in front and to reach the juncture of the welt of the shoe in the rear. A variation of 0.6 cm above/below the welt is acceptable. Hems will be from 5 cm to 7.5 cm wide. b. Trousers will be pressed to present a smooth vertical crease at about the center front and rear of each leg. The crease will extend from the bottom of the hem to about 5 cm above the trouser crotch. c. Enlisted service and dress trousers are standard as issued/sold. 2. Officer’s Dress Trousers a. Dress trousers for each Major Service shall be as prescribed with appropriate stripe/piping (if applicable). b. Field and company grade officers are required to wear the dress uniforms with coats and trousers of authorized fabrics, as maybe prescribed. c. White dress trousers are of 100% polyester fabric. Trousers fabricated of the phase-out polyester-rayon gabardine material may continue to be worn until replacement is required. When worn with the white dress uniform, trousers will match the fabric of the coat. d. Evening dress trousers will have a long waist, high in black, fitting snugly and without wrinkles, without hip or side pockets, buckle straps or belt loops; suspender buttons will be inside the waistband. 3. Female Trousers a. Straight cut and without pleats. b. The bottom part of the trousers’ legs rest on top of the pump shoe while the back of the trousers legs extends approximately 1.27 cm longer that the bottom front.

R E S T R I C T E D

R E S T R I C T E D

34

Trouser, Evening Dress High Waist (Army, Navy, Air Force, Marines, Technical Services)

1.2.18 Suspenders The white suspenders will be of plain design as commercially available. They may be worn under the dress coats in lieu of the web belt and may be worn with the evening dress uniforms. Suspenders for the Battle Dress Uniform may also be worn to help maintain a flat and snug wearing of the uniform.

Army, Air Force, Marines, Technical Services

Female Pants/Trouser

Side pockets along the seam but no back pockets

Male Trouser (Service Dress/Dress Whites, Bust Coat, General Office Uniform)

Navy All Services

R E S T R I C T E D

R E S T R I C T E D

35

1.2.19 Gloves and Cover Caps 1. Military personnel may wear gloves when in cold weather areas as part of their uniform. The black gloves may be leather, vinyl, or cloth made. Officers may be required to wear white gloves in attending military occasions. Enlisted personnel may be required to wear white gloves at military funerals if gloves are provided at no cost to the individual. Officers and enlisted personnel may wear white gloves at other occasions but only during the actual ceremonies unless white gloves are authorized part of their uniforms being worn. 2. Cover Caps will be used during occasions where caps require protections such as during rainy days and parade drills or on occasions where commanders deemed it necessary for uniformity. 1.2.20 Aiguillettes 1.2.20.1 General Unless specifically authorized by the Chief of Staff, AFP, officers listed below will wear aiguillettes. 1. Service aiguillettes consist of the number of loops indicated: a. Four loops – Personal aides to the President or Vice President; aides to the Secretary or Undersecretary of National Defense and Military Attaches and Assistant Attaches assigned to an embassy. Military Attaches and Assistant Military Attaches may wear aiguillettes only within areas of accreditation, except when specifically requested and accompanying an Ambassador or Foreign Service Officer to whom accredited at an official function. b. Four loops – Aides to Generals, Admirals, or officials of higher grade. c. Three loops – Aides to Lieutenant Generals or Vice Admirals. d. Two loops – Aides to Major/Brigadier Generals, Rear Admirals/Commodores, or other officers to lower grade entitled to an aide. 2. Aides to top-ranking foreign representatives visiting the Philippines will wear aiguillettes when so ordered. An aiguillette appropriate to the official’s grade to whom attached will be worn.

R E S T R I C T E D

R E S T R I C T E D

36

3. Administrative Assistants to the Deputy Chief of Staff at General Headquarters may wear the aiguillette when acting in the capacity of Aide de Camp. The aiguillette appropriate to the grade of the Deputy Chief of Staff to whom attached will be worn. 4. Aides to the President, Vice President, foreign Heads of State, and aides at the Malacañang Palace will wear aiguillettes on the right shoulder. All other aides will wear aiguillettes on the left shoulder. 5. When the fourragere is worn with an aiguillette, it will be worn under the aiguillette. 1.2.20.2 Dress Aiguillettes 1. Dress aiguillettes are of round gold cord 0.6 cm in diameter, with a core of yellow cotton covered with gold cord or gilt thread. It consists of two cords made with a pencil attachment on the end of each plaited cord, and of two loops of single cord. The rear-plaited cord is 0.8 m long and the front plaited cord is 0.60 m long; the front single cord is 0.50 m long and the rear single cord is 0.70 m long. The two plaited cords and front single loop (after the latter has been passed through rear single loop) are securely fastened together and have a 10 cm loop No. 9 gold braid for attaching aiguillettes to top button coat, collar opening of dress coat, button or hook of jackets; the rear plaited cord passing over the front plaited cord and fastening underneath the front plaited cord at the loop. From the point where the cords are secured together, the two plaited cords extend as a single cord for 5 cm, then they form coils of olive laps, ends passing through coils and extending 5 cm to gilt pencil attachment. The position separating the front and rear plaited cords is fitted with a bar pin about 4.5 cm long and 2 cm wide, covered with a 3.10 cm strip of No. 3 gold braid covering the ends of the cord, and the bar, to allow attaching the aiguillette to the coat or jacket at the shoulder, just inside the armhole seam.

The pencil attachment is gold-plaited brass, 6.5 cm long, the cap is 1 cm long, and the pencil is 5.5 cm long. The smooth surfaces are polished; the cap or upper part is stamped; and the lower part hollow-cast, turned, milled, and knurled.

Dress Aiguillettes

R E S T R I C T E D

R E S T R I C T E D

37

2. Dress aiguillettes are worn on the evening dress, and dress white uniforms. Both plaited cords and the front single loop are worn in the front of the arm, the rear single loop passing from the rear under the arm. 3. Male. On the evening dress jacket, dress aiguillettes worn on the right side will be suspended from a hook at the inside of the base of the collar closure; those worn on the left side will be suspended from the top button. The shoulder straps on the evening dress jacket may be modified, at the individual’s option, to allow the aiguillette to pass under the shoulder strap. Dress aiguillettes will be suspended from the top button of the dress coat. 4. Female. On the evening dress jackets, dress coats, dress aiguillettes will be suspended from a small button attached to the body of the jacket/coat under the extreme inside point of slash between lapel and collar on the side on which the aiguillette is worn. 1.2.20.3 Service Aiguillettes 1. Service aiguillettes are of round gold wire and Major Service Color cord, 0.6 cm in diameter, and consist of two, three, or four loops sewn together all the way round. The lengths of the cords forming loops are: the first/inside loop, 0.68 m; the second loop, 0.72 m, third loop, 0.75 m, and fourth loop, 0.78 m. Where the ends meet, the cords are fitted with a bar pin about 4.50 cm long by 1.0 cm wide and bound together with a 3.10 cm strip of No. 3 gold braid covering the ends of the cord to allow attachment of the aiguillettes to uniform coats at the shoulder, just inside the armhole seam.

The loops are arranged to lie flat in a horizontal position where they are fastened to the armhole seam, continuing thus for about half their length, then twisting obliquely and becoming superimposed vertically around the lower curved.

2. Service aiguillettes are worn on the service and the dress uniforms. Service aiguillettes are not worn on the service sweater, jacket or coat.

Service aiguillettes

R E S T R I C T E D

R E S T R I C T E D

38

3. To prevent the Major Service color from running, service aiguillettes should not be worn outdoors during periods of precipitation. 4. Service aiguillettes will be fastened under the shoulder strap and go around the shoulder just under the armpit, with the longest loop nearest the collar. 5. On the General Office Uniform shirt, service aiguillettes will go around the shoulder just under the armpit, with the longest loop nearest the collar, and fastened at the shoulder just inside the arm hold seam. 1.2.21 Cummerbunds 1. Prescribed cummerbunds will be worn with the male and female officers’ evening dress, and the SNCO’s evening dress. Standard cummerbunds are made of black cloth satin rayon material with a hook on closure at the back. 2. Cummerbunds will be worn with the pleats opening towards the top. 1.2.22 Sword and Scabbard 1.2.22.1 Sword 1. The sword may be prescribed with all uniforms except the evening dress and BDU utility. 2. Sword blade lengths are available in a range from 66 to 89 cm. The regulation sword length for an individual is determined with the sword at the carry position. The tip of the blade will fall not more than 2.54 cm above or below eye level. 3. The sword blade is a cut and thrust blade of stainless or forged steel. The sword blade has prescribed etched ornamentation. The sword blade has a double channel from the bottom of the etching to the point of the blade, and all exposed surfaces are either polished stainless steel or heavily nickel-plated on a copper base, then polished. 4. The grip of metal (with leaves of ivory or ivory-like plastic) is yellow metal rivets secured. The pommel has an eye of yellow metal through which the loop of the sword knot passes and a straight cross with acorn design on the ends.

R E S T R I C T E D

R E S T R I C T E D

39

5. The owner’s name may be engraved on the sword at the individual’s option. If engraved, the owner’s name (reading from point to hilt) will be etched or engraved on the scroll on the left side near the hilt. An officer who inherits/purchases a sword previously engraved with another officers’ name may wear and maintain it as long as the sword remains serviceable. Removing the previous owner’s name is not required. 6. Sword, sword belt and sword knot are prescribable for all commissioned officers on active duty (except chaplains) in the rank of Majors/Lieutenant Commanders and above. The sword is optional for Captains/Navy Lieutenants and below. 1.2.22.2 Scabbard 1. The scabbard is stainless steel or cold-rolled steel, chrome plated brightly polished, and will accommodate the sword blade snugly. 2. The solid brass, highly polished, ornamented metal trimmings consist of a flush fitting mouthpiece, two lockets each with a ring for sling suspensions, and the tip of the scabbard shoe. The scabbard is line with durable material. 1.2.22.3 Leather Sword Sling 1. The leather sword sling is made of black leather or approved synthetic leather in semi gloss or high gloss (patent) finishes. The outer side of the leather is smoothly finished. The inner side of the sling is darkened to present about the same shade as the outer side. The sword sling consist of the following parts: a. A leather tongue, four snap fasteners, and two straps (one strap 47 cm long and other 29.8 cm long). b. The hardware, which is removable to facilitate polishing, consists of the brass snap fastener with sword hook to which the tongue is attached, and two locking snap swivel fasteners attached to the ends of the straps. The tongue is attached to the brass snap fastener by inserting the rounded tip through the squared loop at the bottom of the fastener toward the back, folding the tip down and closing the four button snap fasteners. The locking snap swivels are attached by inserting the tip ends of the straps through the loops of the locking swivels, folding the tip back and inserting a brass button into the two aligned holes of the strap. The tip end of the straps will be on the inner side of the straps. The large face of the button will be on the outside of the strap.

R E S T R I C T E D

R E S T R I C T E D

40

2. The sword will not be worn without the leather sword sling attached to it. 3. The sword is worn hooked up with the hilt inclined to the rear and the sling outside the scabbard. To attach the sword and scabbard, use the following procedure: a. The snap fastener of the leather sling is engaged in the ring of the shoulder sling or the leather frog. b. The scabbard is held in the right hand to the left front, with the scabbard rings to the rear. c. Engage the snap swivel of the short sling strap to the top ring on the scabbard. d. Engage the snap swivel of the long sling strap to the bottom ring of the scabbard. e. Turn the scabbard 180 degrees clockwise, and loop the upper scabbard over the prong protruding from the outside of the snap fastener to the leather sling. 1.2.22.4 Service Sword Frog 1. The service sword frog is worn when the sword is suspended from the leather service belt. 2. The service frog is made of black leather or approved synthetic leather in semi gloss or high-gloss (patent) finish. The frog has polished brass hooked to fit the 2.54 cm slit at stoop (when folded). 3. The frog is attached to the belt at a point over the highest portion of the hipbone, generally along the seam of the trousers/slacks/skirt. The snap hook of the leather sling is engaged in the ring attachment of the frog. 1.2.22.5 Shoulder Sword Sling 1. The shoulder sword sling consists of sliding shoulder pad, an adjusting buckle, and a sword-attaching ring. 2. The sling is worn by male officers only when a coat is worn. It is worn over the coat, over the right shoulder extending across the torso, with the ring attachment over the top of the left

R E S T R I C T E D

R E S T R I C T E D

41

hipbone, at a point where the sword slit is located in the coat. The sling is worn so that the ring attachment protrudes through the sword slit of the coat. 1.2.22.6 Sword Knot Consists of a loop of 1.3 cm gold lace, 60 cm long with slide and tassel. 1.2.22.7 Preparing the Sword Knot While holding the blade handle to the left, pass the lace through the slit in the guard of the hilt. When forming the initial bight of lace the suspended lengths should be somewhat disproportionate. (One end should be 0.6 cm – 1.3 cm longer than the other.) After taking one turn of the remaining lace and knot around the sword handle, pass the sword knot through the protruding initial bight and adjust the lace slide. 1.2.22.8 Wearing the Sword

The sword belt is worn over the coat (under in the Navy) over the right shoulder extending across the torso. The sword belt strap and lock swivels are passed through the coat on the left side and the longer strap hang free. Twist the sword one half turn in a clockwise direction and suspend on the sword hook with the uppermost scabbard ring. The sword handle faces aft when properly worn.

Navy Dress White with Sword

* The sword handle faces aft when properly worn just as this illustration demonstrates.

R E S T R I C T E D

R E S T R I C T E D

42

1.3 INSIGNIA 1.3.1 Ranks Insignia 1.3.1.1 Insignia of Grade, Officers 1. Generals and Flag Officers will wear only the grade insignia prescribed for their grade. Insignia is made of metal with clutch-type fasteners. a. The rank insignia for Generals and Flag Officers is the five-pointed Silver Star. The star is 2 cm in diameter when used on the shoulder strap and 1.3 cm in diameter when used on the collar. The thickness is 0.3 cm. One star represents a Brigadier General or a Commodore, two stars a Major General or a Rear Admiral, three stars a Lieutenant General or a Vice Admiral, and four stars a General or Admiral.

b. The rank insignia for field grade officers is the sun of the Philippine Flag with eight rays, engraved on its center with a blue letter “K” in old Tagalog script. The sun is 2 cm in diameter when used on the shoulder strap and 1.3 cm when used on the collar, except for Major who shall also used the 2 cm design for the collar. The thickness is 0.3 cm. At the center of the flat top is a blue letter “K” in old Tagalog script, which signifies Kalayaan (freedom) and Kasarinlan (Independence). The color is silver. One sun represents a Major or a Lieutenant Commander; two suns a Lieutenant Colonel or a Commander; and three suns arranged in a straight line, a Colonel or a Navy Captain.

c. The rank insignia for company grade officers is a silver equilateral triangle whose sides are slightly curved outward. On the side is 2 cm long when used on the shoulder strap and 1.3 cm long when used on the collar, except for 2nd Lieutenant who shall also use the 2 cm design for the collar. The thickness of the insignia is 0.3 cm and the top is flat. One triangle represents a 2nd Lieutenant or Ensign; two triangles, a 1st Lieutenant or Lieutenant Junior Grade; and three triangles arranged in a straight line, a Captain or a Navy Lieutenant. 2. Descriptions by Grade: a. General/Admiral – Four silver-colored, five pointed, pyramid-shaped stars. Shoulder stars are 2.0 cm in diameter in a circumscribed circle and are either fastened together on a metal holding bar or placed individually with one point of each star in the same line; distance between the centers of adjacent stars will be 2 cm. Collar stars are miniature size 1.3 cm in diameter and will be fastened together on a metal holding bar in a straight line with one ray of each star pointing upward

R E S T R I C T E D

R E S T R I C T E D

43

and at right angles to the holding bar, distance between adjacent stars is 1.5 cm.

b. Lieutenant General/Vice Admiral – Three silver-colored stars, of the same type and arranged in the same manner as for a General, except the distance between centers of the adjacent shoulder stars will be 1.7 cm. c. Major General/Rear Admiral – Two silver-colored stars of the same type and arranged in the same manner as for a Lieutenant General, except the distance between centers of adjacent shoulder stars will be 2 cm. d. Brigadier General/Commodore – One silver-colored star (same type as above). e. Colonel/Navy Captain – Three silver-colored suns with eight rays and etched at the center is an old Tagalog letter “K” colored blue. Two of the suns’ opposite rays are aligned with the other suns opposite rays. Each sun is 2 cm in diameter and 2 mm apart. Miniature suns are 1.3 cm in diameter and 2 cm apart. f. Lieutenant Colonel/Commander – Two silver-colored suns of the same feature as that of a Colonel/Navy Captain collar insignia; flat, the lowest sun is 1.5 cm from the outer sides of the collar. g. Major/Lieutenant Commander – One silver-colored sun pinned 1.5 cm from the outer sides of the collar.

Shoulder Loop Insignia Collar Insignia Metal Rank Insignia

R E S T R I C T E D

R E S T R I C T E D

44

h. Captain/Navy Lieutenant – Three silver-colored triangles 2 cm in diameter in a circumscribed circle and are either fastened together on a metal holding bar or placed individually with one point of each triangle in the same line with the other triangles; distance between the adjacent triangles will be 2 cm. Collar triangles are miniature size 1.3 cm in diameter in a circumscribed circle fastened together on a metal holding bar in a straight line with a point of each triangle pointing towards the shoulder loop button and at right angles to the holding bar, distance between adjacent triangle is 2 mm. i. First Lieutenant / Lieutenant Junior Grade – Two silver-colored triangle of the same type as for a Captain and arranged in the same manner as that of a Captain. j. Second Lieutenant / Ensign – One silver-colored triangle of the same type as for a First Lieutenant. 3. Insignia Placement a. Officers will wear only the insignia prescribed for their grade. Metal grade insignia will be worn on all uniforms except the cloth rank insignia worn as prescribed. b. Shoulder grade insignia will be placed on each shoulder strap of dress jackets, dress/service coats, the jacket, the sweater, and field coat as follows:

Metal Rank Insignia Shoulder Loop Insignia Collar Rank Insignia

Metal Rank Insignia Shoulder Loop Insignia Collar Rank Insignia

R E S T R I C T E D

R E S T R I C T E D

45

1) All officers will wear their insignia so that it is equidistant from the front and rear edges of the shoulder straps. Colonels and below will position their insignia so that the midpoint of the insignia’s outer edge is 2.5 cm from the armhole seam. 2) General officers’ stars will be worn 2.5 cm from the armhole seam. One ray of each star points toward the collar using the armhole seam as the base. 3) Colonels’ suns will be worn with suns’ rays parallel to the sides of the shoulder strap. 4) Company grade triangles will be worn with one point of the triangles pointing to the shoulder strap button with the armhole seam as the base.

c. Collar grade insignia will be worn on both sides of the collar of khaki shirts of the Navy and the Marines. When the service uniform is worn, the wear of collar insignia on the shirt is optional; however, if the coat is removed, insignia will be worn on the shirt collars. The insignia will be 2.50 cm from the front edge of the collar and 2 cm parallel to the side edge. 1) General officers’ stars will be worn with one ray of each star pointing toward the top edge of the collar. 2) Colonels’ suns will be worn with the suns rays parallel to the outer side of the collar 2 cm distant and the lowest sun 2.54 cm distant from the front edge of the collar. 3) Company Grade insignia will be worn with the triangles parallel to the side edge of the collar 2 cm distant and the lowest triangle 2.54 cm distant from the front edge of the collar.

Metal Rank Insignia on Shoulder Strap

(Service Blouse/Bush Coat)

Insignia, Shoulder Loop (General Office Uniform/Jacket)

R E S T R I C T E D

R E S T R I C T E D

46

d. Collar grade insignia will be also worn on the right side of the oversea/garrison cap, opposite to the AFP coat of arms. The insignia shall be 4 cm from its center to the cap’s front edge and 3 cm from the insignia’s center to the cap’s bottom edge. 1) Generals’ stars will be worn with one ray of each star pointing toward the top of the cap, centered along horizontal axis between the cap’s lower edge and the braided cord, and 3 cm from the front edge. 2) Colonels’ suns will be worn parallel to the base of the cap with the two of opposite rays parallel to the front edge. The position will be in the same manner as that of the General’s stars. 3) Field grade suns will be worn as that of the Colonel. 4) Company grade triangles will be worn so that the bases of the triangles are essentially horizontal and parallel to the base of the cap. It shall be place as that of a Colonel.

Collar Rank Insignia worn on the Navy and Marines’ GOU Shirt

Rank Insignia (Miniature)

Insignia Placement on collar

Officers’ Oversea Cap

R E S T R I C T E D

R E S T R I C T E D

47

1.3.1.2 Insignia of Grade, Enlisted 1. General a. Enlisted personnel will wear only the grade insignia prescribed for their grade, as available through the Military Supply Stores or Exchange System (72-100). b. Cloth insignia will be sewn on garments with thread that matches the background material of the insignia using a straight machine stitch. No other style of stitching will be used. c. Broadcloth insignia (major service colors) may be finished with either a whip stitched edge or a cut edge. Insignia of either style may be worn on the same uniform with service stripes of either style. 2. Regulations for Cloth Insignia a. Insignia will be of the design prescribed according to the Major Services and will be worn single point up, centered on the outer half of each sleeve. Insignia will be placed 10 cm below the left and right shoulder seam of long sleeves. b. Insignia will be worn on GOU shirts. On short sleeve GOU shirts, insignia will be centered between the shoulder seam and the bottom edge of the sleeve (men) or the peak of the cuff (women). c. Insignia will be worn on women’s dress white shirts, centered between the shoulder seam and the peak of the cuff. 1.3.2 Ratings Insignia (Chest) 1.3.2.1 General 1. Military personnel qualified or designated as an aviator, flight officer, aerial navigator, aviation observer, naval or combat aircrew member, parachutist, explosive ordnance disposal technician, or scuba diver, medical corps, judge advocates, nurse corps, medical administrative corps, and chaplains whose right to wear the insignia has not been specifically revoked, will wear appropriate breast insignia according to regulations. 2. In addition to the breast insignia authorized in these regulations, medical officers assigned to units who are designated

R E S T R I C T E D

R E S T R I C T E D

48

flight surgeons may wear the metal flight surgeon insignia on Major Service and BDU utility uniforms. 3. Only those breast insignia listed in these regulations are authorized for wear on AFP uniforms. 4. Other service pilot/navigator insignia and foreign pilot insignia may be worn, but only as authorized by the Chief of Staff, AFP. 5. Any other service/foreign/civilian breast insignia may be accepted by an individual, but will not be worn on AFP uniforms. 6. Further details of these awards are discussed in Chapter 8 of this Code. 1.3.2.2 Regulations for Wear 1. Authorized insignia will be worn on the left breast of all service and dress coats. It may be worn at the individual’s option on GOU shirts worn as the outer garment (with or without ribbons), utility coats or the maternity work uniform coats. Miniature insignia, one-fourth of the regular size, will be worn on evening dress jackets. Breast insignia will not be worn on the cloak/cape, jacket, field coat or sweater.

a. When worn alone, the insignia will be worn in the same position a single ribbon would be worn. b. When worn with medals, ribbons, or membership badges, the bottom of the insignia will be centered 0.3 cm above the top row of such awards. When the centering of the insignia presents an unsatisfactory appearance, the insignia may be centered between the outer edge of the coat lapel and the left edge of the vertically aligned ribbon rows.

Command Badge (Non-current)

Functional Eligibility Badge

Occupational Specialty Badge

Uniform Shirt

R E S T R I C T E D

R E S T R I C T E D

49

c. When worn on the BDU camouflage utility coat, the bottom of the insignia will be centered above the name/service cloth. 2. When worn on the camouflage maternity work uniform, the bottom of the insignia will be centered above the service cloth or tape. 3. When worn on male officers’ evening dress jacket, the miniature insignia will be placed on the left front panel on a line 0.30 cm above the second blind buttonhole, and spaced midway between the inner edge and left armhole seam. 4. When worn on evening dress jackets with lapels, the miniature insignia will be centered 0.3 cm above the miniature medals, or if no medals are authorized, the miniature insignia will be centered on the lapel at the position prescribed for the top of the medal bar. 5. Other service pilot/navigator insignia or foreign pilot insignia earned while the individual was a member of the foreign or other services may be worn provided the insignia is a duly authorized qualification insignia. These insignia may be worn on the right breast. 6. When aviation insignia is worn with the basic parachutist insignia, the parachutist insignia will be centered 0.3 cm above any aviation insignia. 7. When EOD insignia is worn with aviation or parachutist insignia, the EOD insignia will be centered 0.3 cm above the other insignias. 8. When SCUBA diver insignia is worn with any other breast insignias, the scuba diver insignia will be centered 0.30 cm above the other insignias. 9. No more than three approved breast insignias will be worn to include one foreign pilot or other U.S. service pilot/navigator insignias will be worn on the right, at any time. 1.3.3 Miniature Insignia Miniature insignias shall be used particularly in the Mess Dress or Mess Jacket uniform and as prescribed by Commanders but they shall not be worn along with the other standard size decorations and badges.

R E S T R I C T E D

R E S T R I C T E D

50

1.3.4 List of Occupational Specialty Badge 1. PAF Aviation Badges / Avionics – Aircraft Maintenance Badges 2. Command at Sea Badges (Navy) 3. Combat Kagitingan Badges (Army) 4. Command Badges (Marine Corps) 5. Naval Aviation Badges 6. Naval Surface Warfare Badges 7. UOG / SEAL / Scuba Badges 8. EOD Badges 9. Army Aviation Badges 10. AFP Parachutist Badges 1.3.5 List of Functional / Eligibility Badges 1. Adjutant General Service Badge 2. Inspector General Service Badge 3. Logistics

4. Quartermaster Service Badge 5. Finance Service Badge 6. Infantry Badges 7. Cavalry Badges 8. Field Artillery Badges 9. Signal Corps Badges 10. Engineers Badges 11. Ordnance Badges

R E S T R I C T E D

R E S T R I C T E D

51

12. Comptrollership Badge

13. Civil Relations Service Badges 14. Seabees Badges, PN

1.4 CIVILIAN CLOTHING 1.4.1 Wearing of Civilian Clothing 1.4.1.1 General 1. The Chief of Staff, AFP extends the privilege of wearing civilian clothing to officers and enlisted personnel within the limitations of these regulations.

2. Military personnel may well be associated and identified with the AFP even when not wearing a uniform. Therefore when civilian clothing is worn, military personnel will ensure that their dress and personal appearance are conservative and commensurate with the high standards traditionally associated with the AFP. No eccentricities of dress will be permitted. The wearing of earrings by male personnel, under any circumstances, is prohibited.

3. When civilian clothing has been authorized

by competent authority for wear in a duty status in lieu of uniform, the civilian clothing will be of the same comparable degree of formality as the uniform prescribed for such duty. Standards of dress and appearance will be conservative and meet the same high standards established for personnel in uniform.

4. No part of a prescribed uniform, except

those items, which are not exclusively military in character, will be worn with civilian clothing.

a. Items authorized for wear with civilian clothing by men are restricted to the gold cuff links, studs, tie bar, mourning band, footwear, socks, gloves, undergarments, black bow-tie, service sweater, green wool scarf, general purpose trunks, and the jacket without insignia of grade.

b. Uniform items authorized for wear with civilian clothing by women are restricted to the white shirt without insignia grade, footwear, gloves, handbag, clutch purse, mourning band,

R E S T R I C T E D

R E S T R I C T E D

52

service sweater, green wool scarf, general purpose trunks, and the jacket without insignia of grade.

c. Uniform items that have been

declared obsolete may be worn with civilian clothing, when appropriate, provided such items contain no distinctive insignia or buttons. 1.4.1.2 Within the Philippines Military personnel may wear civilian clothing when in off-duty status, when directed by competent authority, and as otherwise authorized herein. Within the confines of a military base, civilian clothing will be worn subject to local regulations. 1.4.1.3 Aboard Ships and Aircrafts 1. Officers and enlisted personnel are permitted to possess civilian clothing when aboard ship. Unless otherwise prescribed by competent authority, such clothing may be worn while going or leaving the ship, while awaiting transportation after being given permission to leave the ship, while on authorized leave of absence, liberty or in any off-duty status ashore. 2. Officers and enlisted personnel will wear appropriate military uniform when traveling as passengers aboard military aircraft and naval ships. 1.4.1.4 Outside the Philippines 1. Military personnel stationed outside the Philippines will wear the appropriate uniform when on duty unless civilian clothing is required by the laws of foreign country, prescribed by competent authority, or necessary in performing specialized duties. 2. Personnel on leave and traveling in a foreign country should normally wear civilian clothing. When civilian clothing is worn, it will be in good taste and not in conflict with accepted attire in the country visited. 1.4.1.5 Special Assignments/Requirements 1. Military personnel in special billets whose offices are separate from other military activities, and whose duties require them to associate principally with civilians, may wear civilian clothing when so stated in their orders or as otherwise authorized by the Commander.

R E S T R I C T E D

R E S T R I C T E D

53

2. Officers under instruction at civilian educational institutions and in civilian industrial establishments may wear civilian clothing for such duty.

1.4.1.6 Uniform when Assigned in Malacañang or Congress/Senate Civilian attire may not be worn at the Malacañang Palace or Congress except as follows: 1. While attending or participating in conferences, working group sessions, etc., at the Executive Office Building when the President or his senior advisers will not be present. 2. When explicitly called for in an invitation. 3. When assigned billet requires civilian attire. 4. While visiting the Malacañang Palace or Congress as a tourist. 1.4.1.7 Standard of Dress

“The Army is a uniformed service where discipline is judged, in part, by

the manner in which the individual wears the uniform as prescribed. Therefore, a neat and well-groomed appearance by soldiers is fundamental to the Army and contributes to building the pride and spirit essential to an effective military force.”

US Army Uniform Regulations

As it is clearly described in the above excerpt, it is the duty of those men in the world of arms to ensure pride and dignity in the wearing of the uniform and not to defile its professional image and military virtues by which it represents. 1.4.2 Restrictions. As prescribed by Major Service Commanders concerned.

R E S T R I C T E D

R E S T R I C T E D

54

1.4.3 Civilian Clothes for Military Personnel on Special Duty 1. Chief of Staff, AFP establishes the requirement for enlisted personnel to wear civilian clothing in the performance of their official duties. Commanding Officers will not direct enlisted personnel to wear civilian clothing in the performance of official duties unless a civilian clothing allowance has been authorized. 2. Prescribing authorities within the Philippines may authorize personnel in special billets whose offices are separate from other military activities and whose duties require them to associate principally with civilians, to wear civilian clothes while performing assigned duties. 3. Personnel under instruction at civilian educational institutions and in civilian industrial establishments may wear civilian clothes at all times. Medical and Dental officers assigned to duty with veterans administration may wear civilian clothes while performing such duty. 4. Medical officers serving as interns at civilian hospitals may wear civilian clothes. 1.4.4 Wearing Uniform Articles with Civilian Clothes 1. Military personnel may wear the military uniform articles listed below with civilian clothing: a. Coat/Raincoat (w/o insignia) b. Belts with civilian buckles c. Cap, Knit watch d. Command/Ball Cap (w/o insignia) e. Gloves f. Handbag g. Jacket, (w/o insignia) h. Necktie i. Shoes j. Socks/Hosiery k. Sweaters l. Underwear 2. Military personnel may wear any other articles of the uniforms as long as they are not visibly and obviously considered part of the military uniform and its characteristics are similar to that of the civilian clothes.

R E S T R I C T E D

R E S T R I C T E D

55

1.4.5 Personnel on Leave and Traveling 1. Personnel on leave and traveling in a foreign country should normally wear civilian clothing. When civilian clothing is worn, it will be in good taste and not in conflict with accepted attire in the country visited. 2. Official visits will always be made in the appropriate uniform. Unofficial visits should always be made in civilian clothing. 1.5 GENERAL OFFICE UNIFORMS 1.5.1 Prescribed Uniforms Prescribing authorities select uniforms, the individual does not. It is essential that suitable uniforms for stations, dress and work are prescribed. Each designated camp, base or station should consider its unique work environments, tenant commands and missions, climatic conditions, geographic location and public exposure. Generally, there will be only one uniform of the day authorized for wear at a given time and location. All military personnel must wear either the uniform of the day or appropriate civilian attire prescribed by the activity’s prescribing authority. Military and civilian attire must present a neatly groomed and socially acceptable appearance. When warranted by local circumstances, the prescribing authority may prescribe an alternate uniform. A specific uniform will be prescribed for functions involving the civilian community. Local commands including those detailed overseas may address special uniform requirements to the prescribing authority if a waiver is necessary. 1.5.2 Regulations Each prescribing authority shall publish uniform guidelines. They must be punitively enforceable with the force of a general order and thus are recommended for review by the cognizant Judge Advocate to ensure enforceability. 1. Guidance. The following guidance is for preparing uniform directives: a. When a departure from former uniform policy is planned, review the new policy with AFP uniform boards to ensure adequate availability. b. Consider potential financial impact, which could occur from an abrupt shift in policy. Transition period must be taken into account.

R E S T R I C T E D

R E S T R I C T E D

56

c. Area directives should specifically address uniform requirements for personnel in medical, industrial, or other unique jobs. d. Wearing non-standard accouterments, unauthorized combinations of uniform components, and low quality designed uniform components is prohibited. e. Special situations – request waivers from the Chief of Staff, AFP via the Chain of Command for any uniform requirements of training commands or officer accession commands that deviate from these regulations. f. Organizational clothing, i.e. jackets, green flight jackets, coveralls, etc., is authorized for wear with working uniforms only during actual performance of special work or duties for which organizational clothing is designed. g. Optional items may be worn but not required. 1.5.3 Battle Dress/Field Uniforms 1. The Camouflage Utility/BDU is the authorized wear when in the field, field-type exercises, or in those work conditions where it is not practical to wear the service office uniform or General Office Uniforms, or in cases of heightened alert conditions. 2. When the Camouflage Utility/BDU is prescribed as the working uniform, military personnel may wear it to and from their domicile, unless otherwise prohibited by the commander. Commanders may authorize the wear of the BDU utility uniform for brief and appropriate stops off base during duty hours or while commuting. Defining appropriate and necessary stops is a command responsibility requiring the exercise of sound judgment and common sense. Preventing abuse of the privilege demands that commanders know where their personnel are to ensure that stops are in fact brief, appropriate and in keeping with the spirit of regulations. In no case will the utility/BDU be treated or regarded as a leave or liberty uniform except when prescribed by commanders to meet special (normally overseas/deployed/etc.) requirements to include certain emergency leave situations. 3. To achieve uniformity and a strong sense of identity among the military personnel of the AFP, the following guidelines are hereby prescribed in the wearing of the Battle Dress Uniform (BDU).

R E S T R I C T E D

R E S T R I C T E D

57

a. The BDU shall be adopted as the authorized standard camouflage uniform for AFP personnel with the following appurtenances: 1) The rank insignia shall be embroidered in black with olive drab background (subdued) sewed on both sides of the collar. 2) The name cloth or nametape shall likewise be embroidered black with olive drab background (subdued) sewed tangent to the upper portion of the right pocket. 3) On the upper portion of the left pocket will be service tape indicating the branch of service. 4. The appurtenances will be the same as those of the former tropical fatigue uniform such that insignias of the collar will be the embroidered cloth insignia in black with olive drab background (subdued). Other appurtenances shall be in the same manner embroidered in black with olive drab background (subdued). 5. Enlisted personnel shall also have the cloth-embroidered rank insignia sewn on both collars and other appurtenances according to specification prescribed by their major services. 6. Camouflage battle dress uniforms shall not be worn in Metro Manila area except for personnel of special action units, which habitually wear camouflage uniforms such as the Marines, the Army Rangers and Special Forces while on authorized troop movements. In any case, wearing of camouflage uniforms is strictly prohibited in Malacañang area. General exception is when the AFP is put on red alert status.

Cloth Rank Insignia Name Cloth/Tape

Major Unit Emblem

Camouflage Shirt

Occupational Specialty Badge

R E S T R I C T E D

R E S T R I C T E D

58

7. The Navy Working Khaki in place of the BDU shall be worn on occasions requiring BDU wearing while on shipboard duty status. Navy personnel, however, shall wear the prescribed battle dress uniform during red alert status or when so directed.

1.5.4 Wearing of IDs on Uniform of the Day All military personnel in any headquarters shall wear their Office IDs as prescribed by the Commander. The ID shall be pinned on the inner side of the left pocket. ID’s with cords around the neck is not authorized when wearing military uniforms. 1.6 BASIC INDIVIDUAL AND ORGANIZATIONAL CLOTHING AND EQUIPMENT 1.6.1 Bag, Duffel. Duffel Bags shall be part of the initial individual combat equipment. It shall be used for transporting personnel belongings, equipments, and supplies. It is made of canvass material with snap button and carry handle. 1.6.2 Belts and Buckles. Belts and Buckles shall be as prescribed in this Code. Belts for all officers and enlisted personnel shall be standard green web (green, khaki, black) while the buckle of all personnel of all grades is silver colored engraved on the surface with appropriate Major Service seal. 1.6.3 Headgear 1.6.3.1 General 1. Pershing caps will be worn centered and straight with the tip of the visor in line with the eyebrows. Leather chinstraps and visors will be kept polished. The cap shall be worn so that it will fit snugly and comfortably around the largest part of the head. The lower band of the frame rests high enough on the head to preclude the top of the head forcing the cover above its natural tautness. Garrison/Oversea caps will be worn centered squarely with the top unbroken, and with the base of the sweatband about 2.54 cm above the eyebrows. The Garrison cap shall be worn so that the fit around the head is adequate to place the cap on the head and will not cause the top or front rear contour of the cap to break. 2. Men’s cap crowns should fit on the frame and be free of wrinkles. Male officers’ cap crowns will have a quatrefoil centered on the top panel and an outer band of mohair braid. 3. When outdoors, military personnel should remain covered, including during invocations and other religious portions of

R E S T R I C T E D

R E S T R I C T E D

59

military ceremonies (i.e., changes of command, ship commissioning, military burials, etc.). Military personnel will uncover outdoors when so ordered or during religious services not associated with a military ceremony. Chaplains will be guided by the customs of their respective churches with respect to wearing head coverings. 4. Headgear is normally removed indoors. Military personnel in a duty status and wearing side-arms or a pistol belt will remain covered indoors except when entering a space where a meal is in progress or religious services are being conducted. Headgear will be worn in Government vehicles, and in privately owned vehicles on base, except when doing so would present a hazard to safe driving. 5. Men may wear a rain cap cover to protect service or Pershing caps in inclement weather with or without the coat. Women may wear the umbrella in inclement weather. 6. The oversea or garrison cap shall be the standard headgear of all military personnel whenever traveling abroad for seminars, conferences, schoolings, tours, and such other occasions whereby such use is more convenient to the wearer. The cap, however, shall not be used in the Navy’s Dress White and Marines Dress Blue. 1.6.3.2 Pershing Cap 1. Pershing Cap a. Male 1) Cap Frame a) Field Grade/ General Officers, black clot-covered visor with gold bullion or synthetic ornamentation as prescribed. b) Company Grade Officers/enlisted, black leather/synthetic leather (high gloss) visor. 2) Dress chinstrap (officers), or black leather/synthetic leather (high gloss) chinstrap (enlisted). 3) Two AFP coat of arms gold uniform screw post buttons. 4) Dress cap AFP coat of arms insignia (officers), or gold colored service insignia (enlisted).

R E S T R I C T E D

R E S T R I C T E D

60

b. Female The felt cap shall be the equivalent of the male’s Pershing cap, hence, it shall be worn whenever the Pershing cap is prescribed. The Army shall have the Army Green Felt Cap as the standard female cap. The Navy shall use the White Felt Cap with a black felt visor and crown while the Air Force shall have Blue Felt Cap as the standard service cap. 1) Field grade officers will wear the felt cap with synthetic gold strap and visor ornamentation as prescribed. The AFP coat of arms shall be centered in front of the cap. 2) Company grade officers will have a plain black felt cap with synthetic gold strap but without visor ornamentation. The same AFP coat of arms shall be centered in front of the cap. 3) Enlisted personnel caps shall have plain felt cap with major service seal centered on the front of the cap.

Enlisted Cap Device

Enlisted Felt Cap Officer Felt Cap

Officer Cap Device

Service Cap (O1-O3) (Without ornaments)

Service Cap (Field Grade) (With ornaments)

Service Cap (Flag/General Officer)

(With ornaments)

R E S T R I C T E D

R E S T R I C T E D

61

6 cm

1.6.3.3 Oversea Caps/Garrison Caps 1. Male a. Oversea/Garrison caps of distinctive major service fabric or summer weight polyester/wool fabric (for Technical and Administrative Services) may be worn with service uniforms of any fabric. b. Male personnel will wear the oversea/garrison cap with the service uniform except when the service cap is authorized/required. c. The oversea/garrison cap will normally be worn in formation with the service uniform, except when the Pershing cap is prescribed by the commander for specific occasions. 2. Female

a. Oversea caps of distinctive major

service fabric or summer weight polyester/wool fabric (for Technical and Administrative Services) may be worn with service uniforms of any fabric. b. The oversea cap shall always be worn on the general office uniform except when the felt cap is prescribed for specific occasions. 3. The AFP Parachutist canopy patch may be worn on the front right side of the oversea/garrison cap by qualified airborne military personnel. The black canopy is embroidered on an olive drab embroidered background 5 cm in diameter. The patch is sewn 6 cm from its center to the caps’ front edge and 4 cm from its center to the vase.

Oversea/Garrison Cap

AFP Parachutist Canopy Patch

AFP Coat of Arms

R E S T R I C T E D

R E S T R I C T E D

62

1.6.3.4 Utility Caps

The camouflage utility cap will be worn with the utility/BDU, except when another type of headgear is specifically authorized by these regulations or as directed by the commander. It will also be worn with the maternity work uniform.

1.6.4 Coats 1.6.4.1 General 1. Camouflage BDU/utility coats will only be worn as a part of the camouflage BDU/utility uniform, and will have the prescribed name tapes/cloths and service cloths. 2. Buttons on all service/dress coats may be detachable with worked eyelets provided for them. 1.6.4.2 Male 1. Service coats are semi-formatting garments and will not be fitted to present a tight or formfitting appearance. Approximately 5 cm of freedom should be allowed through the chest and 2.54 cm at the waist, with the belt of sufficient length to fit the coast waist rather than pulled snugly against the waist of the individual. A properly fitted service coat will ride freely up and down the body when the arms are raised/lowered. 2. Service coats are not formfitting garments and will be fitted and altered accordingly. 3. Only the sleeves, collars, and lapels of the service coat will be creased and pressed flat. Creases in the back skirt of the coats are prohibited. 4. The length of all coats will extend about 2.5 to 5 cm above the second/large joint of the thumb. 1.6.4.3 Female 1. The service dress coats will be worn at all times with the service uniforms, except that the service coat may be removed within the confines of offices. 2. Service and dress coats are semi-formfitting garments and will be fitted and altered accordingly. The coat

R E S T R I C T E D

R E S T R I C T E D

63

should fit smoothly but not tightly across the bust and shoulders with sufficient looseness to permit both arms to move freely. 3. Coat sleeve/lapels will be roll pressed. 1.6.5 Gloves The white cotton gloves are the standard hand gloves to be used by all military personnel in all service dress uniforms. However, black leather gloves may also be used when in cold weather areas. Black cotton hand gloves may be used as prescribed by the Commander. 1.6.6 Liners Liners shall be part of the individual equipment issued as prescribed by Major Services. 1.6.7 Shirts 1. Military personnel may purchase and wear shirts with approved identification from commercial sources on an optional basis. Enlisted personnel use these shirts (with the exception of the French cuff shirt), to satisfy minimum requirements.

2. The Marines’ cotton-blend shirts will be pressed with

military creases. Military creases are formed by pressing two vertical creases in the front of the shirt, from the shoulder seam to the top of each pocket and from the bottom of the shirt downward, and three evenly spaced vertical creases in the back of the shirt, from the yoke seam to the bottom of the shirt. 3. Women’s shirts will be worn tucked in the skirts/slacks, to include those women who are required to wear a duty/sword belt will tuck their shirts into their slacks/skirts. The sleeves of the shirt will be creased and lapels roll-pressed; however, shirts will not be pressed with military creases. 1.6.8 Sweaters 1. The major service sweater is of 100 percent wool, in a heavy ribbed knit crew-neck design with shoulder and elbow patches. An acrylic knit sweater of the same design may be purchased and worn at the individual’s option in lieu of the wool sweater. The service sweater may be worn as component of the General Office and utility uniforms only. The short sleeve shirt may be worn with the service sweater at those locations and during period authorized.

R E S T R I C T E D

R E S T R I C T E D

64

2. When the sweater is worn with the service uniform, the shirt collar will be worn outside the sweater without necktie/neck tab and the shirt collar button will be unbuttoned. The waistband of the sweater may be turned under; however, the sweater should cover the trousers/skirt/slacks waistband. When worn with the camouflage BDU utility uniform, the sweater will be worn under the utility coat. 3. Commanders may prescribe the service uniforms with sweater for inspection; however, it will not be worn in ceremonial formations or parades on or off the military installation. The sweater will not be worn on occasions for which the commander determines the service uniform more appropriate. The sweater may be worn with service uniform for leave and liberty and commuting to and from work. 1.6.9 Trunks

As prescribed in the standard battle dress uniform and as part of the individual clothing. 1.6.10 Raincoats and Ponchos Raincoats and ponchos shall be standard issues to individual military personnel and as prescribed by Major Service Commanders. Standard colors will be olive green or black and worn with the Pershing cap with cover, garrison/oversea cap, helmet, or black umbrella. 1.6.11 Towels Towels are standard white for recruits and officer candidates with black markings on one end representing the initials of the institution or unit they are stationed. Standard issue for regulars shall be 100% cotton olive drab green colored with black markings on one end representing the initials of the major services and/or major commands they are stationed. 1.6.12 Pouches. As prescribed in the individual combat equipment issues and shall be subject to constant evaluation. 1.6.13 Canteens and Caps. As prescribed in the individual combat equipment issues. 1.6.14 Field Jacket

As prescribed in the individual combat equipment issues. The camouflage field jacket may be used with the General Office Uniform in lieu of the service sweater or jacket during inclement weather. It may also be used with the Bush Coat.

R E S T R I C T E D

R E S T R I C T E D

65

1.6.15 Magazines

As prescribed in the individual combat equipment issues. M16A1 Magazines are issued in accordance with the basic load of ammunition distributed to individual soldier. 1.6.16 Shelter Tents. As prescribed in the individual combat equipment issues. 1.6.17 Bayonets. As prescribed in the individual combat equipment issues. 1.6.18 Backpacks. As prescribed in the individual combat equipment issues. 1.6.19 Combat Boots

As prescribed in the individual combat equipment issues. Standard all black-leather and canvass is the authorized combat boots. 1.6.20 Socks

Socks shall be standard white cotton wool with sole cushion for

athletic use and black cotton wool with sole cushion material for combat wear. 1.6.21 Dog Tags

Dog Tags shall be initially issued to all individual military personnel where it shall contain the full name, serial number, blood type, and religion of the individual wearing it. Dog tags shall be worn compulsorily when on field duty, area assignments, or foreign deployments. 1.6.22 T-Shirts The standard undershirt to be worn on all service and general office uniform shall be plain cotton white round neck. Undershirt for camouflage utility Battle Dress Uniform shall be plain olive drab green round neck. 1.6.23 Physical Fitness Uniforms 1. The standard physical fitness (PF) uniform consists of the green or camouflage general-purpose trunks and the standard brown or olive drab green undershirt. The wear of footwear or headgear with this

R E S T R I C T E D

R E S T R I C T E D

66

uniform will be as prescribed by the commander. No unit distinguishing marks or other ornamentation will be placed on the uniform. 2. This uniform will be prescribed for all command physical fitness activities except on those specific occasions when the commander determines that the wear of another uniform or other clothing is more appropriate. 3. The physical fitness shirts shall have the respective service bold print marks on the chest part such as “ARMY”, “NAVY”, “AIR FORCE” and “MARINES”. 1.7 PERSONAL APPEARANCE AND GROOMING 1.7.1 Personal Appearance 1. Because it is impossible to provide examples of very appropriate or unacceptable hairstyle of “conservative” or “eccentric” grooming, the good judgment of leaders at all levels is key to enforcement of AFP grooming policy. Therefore, hair/grooming standards while in uniform shall present a neat, professional appearance. 2. The AFP’s uniform regulations for standards of personal appearance and grooming are as specific as practicable in order to establish the parameters with which military personnel must comply. AFP Uniform Code standards of grooming do not allow faddish styles of hair, jewelry, or eyeglasses, eccentricities in individual appearance that detract from uniformity and team identity. 3. Articles that are not authorized for wear as a part of a regulation uniform will not be worn exposed with the uniform. Examples of such articles include but are not limited to the following: Pencils, pens, watch chains, fobs, pins, jewelry (except as authorized herein), handkerchiefs, combs, cigarettes, pipes, barrettes, hair ribbons/ornaments, flowers (corsages/boutonnieres, etc.) or other similar items. Cellular phones, pagers, etc. are also not authorized. 4. Subject to temporary revocation due to health, safety, or mission requirements, military personnel may wear neat and conservative: a. Articles of religious apparel, which are not visible or apparent when worn with the uniform. b. Visible articles of religious apparel with the uniform while attending or conducting divine services or while in a chapel or other house of worship.

R E S T R I C T E D

R E S T R I C T E D

67

c. Visible articles of religious apparel with the uniform, which do not interfere with or replace required uniform articles. 5. Articles that may be worn while in uniform include inconspicuous wristwatches and rings. Eyeglasses/sunglasses, when worn, will be conservative in appearance. Eccentric or conspicuous eyepieces are prohibited. 1.7.2 Grooming, Haircuts, Hairpieces 1.7.2.1 Male Grooming 1. No eccentricities in the manner of wearing head, facial, or body hair will be permitted. If applied, dyes, tints, bleaches and frostings, which result in natural colors, are authorized. The hair color must complement the person’s complexion tone. Color changes that detract from a professional image are prohibited. Fingernails will be kept clean and neatly trimmed so as not to interfere with performance of duty, it must not detract from military image or present a safety hazard. 2. Men will be well groomed at all times and will abide by the following: a. Keep hair neat, clean and well groomed. Hair above the ears and around the neck shall be tapered from the lower natural hairline upwards at least 1.9 cm and outward not greater than 1.9 cm to blend with hairstyle. Hair on the back of the neck must not touch the collar. Hair shall be no longer than 10 cm and may not touch the ears, collar, extend below eyebrows when headgear is removed, show under front edge of headgear, or interfere with properly wearing military headgear. The bulk of the hair shall not exceed approximately 5 cm. Bulk defined as the distance that the mass of hair protrudes from the scalp. Hair coloring must look natural and complement the individual. Faddish styles and outrageous multicolored hair are not authorized. The unique quality and texture of curled, kinked, waved, and straight hair are recognized, and in some cases, the 1.9 cm taper at the back of the neck may be difficult to attain. In those cases, hair must present a graduated appearance and may combine the taper with a line at the back of the neck. One (cut, clipped or shaved) natural, narrow, fore and aft part is authorized. Varying hairstyles, including Afro, are permitted if these styles meet the criteria of maximum length and bulk, tapered neck and sides, and do not interfere with proper wearing of military headgear. Plaited or braided hair shall not be worn while in uniform or in a duty status. Keep sideburns neatly trimmed and tailored in the same manner as the haircut. Sideburns shall not extend below a point

R E S T R I C T E D

R E S T R I C T E D

68

level with the middle of the ear, shall be of even width (not flared) and shall end with a clean-shaven horizontal line. b. Hair will be neat and closely trimmed. The hair may be clipped at the edges of the side and back; will be evenly graduated from zero length at the hairline in the lower portion of the head to the upper portion of the head; and will not be over 7.5 cm in length fully extended on the upper portion of the head; the back and sides of the head below the hairline may be shaved to remove the body hair. c. Sideburns will not be styled to taper or flare. The length of an individual hair of the side burn will not exceed 0.3 cm when fully extended. d. Head hair will be styled so as not to interfere with the proper wearing of headgear and it should not be in an unsightly manner as it can be considered excessive, regardless of length. 3. No male personnel will be required to have his hair clipped to the scalp except while he is undergoing recruit training or when such action is prescribed by a medical officer for health reasons. 4. Members of the selected AFP Reserve will comply with these regulations, except that wigs are authorized for periods of inactive duty for training. If worn, wigs will comply with the above grooming regulations. 5. The face will be kept clean and shaved. Shaving each day will suffice the minimum requirement of good grooming. 6. Except for a mustache, eyebrows, and eyelashes; hair may be grown on the face only when a medical officer has determined that shaving is temporarily harmful to the individual’s health. 7. No male personnel will be required to have his chest hair clipped except that which is so long as to protrude in an unsightly manner above the collar of the shirt.

R E S T R I C T E D

R E S T R I C T E D

69

1.7.2.2 Female Grooming 1. Hairstyles shall not be outrageously multicolored or faddish, to include shaved portions of the scalp (other than the neckline), or have designs cut or braided into the hair. Hair coloring must look natural and complement the individual. Haircuts and styles shall present a balanced appearance. Lopsided and extremely asymmetrical styles are not authorized. Ponytails, pigtails, widely spaced individual hanging locks, and braids, which protrude from the head, are not authorized. Multiple braids are authorized. 2. Braided hairstyles shall be conservative and conform to the guidelines listed herein. When a hairstyle of multiple braids is worn, braids shall be of uniform dimension, small in diameter

(approx. 0.60 cm) and tightly interwoven to present a neat, professional, well-groomed appearance. Foreign material (i.e., beads, decorative items) shall not be braided into the hair. Short hair may be braided in symmetrical fore and aft rows (corn rowing), which minimize scalp exposure. Cornrow ends shall not protrude from the head, and shall be secured only with inconspicuous rubber bands that match the color of the hair.

GROOMING STANDARDS FOR MEN ------ INDICATES SCALP LINE Sideburns shall not extend below a point level with the middle of the ear, as indicated by line “A”. Hairstyle properly groomed shall not be greater than approximately 5 cm in bulk. Bulk is the distance that the mass of hair protrudes from the scalp. No individual hair will measure more than 10 cm in length.

Grooming Standard for Men

R E S T R I C T E D

R E S T R I C T E D

70

3. Appropriateness of a hairstyle shall also be judged by its appearance when headgear is worn. All headgear shall fit snugly and comfortably around the largest part of the head without distortion or excessive gaps. Hair shall not show from under the front of the brim of the combination hat, garrison, or command ball caps. Hairstyles which do not allow headgear to be worn in this manner, or which interfere with the proper wear of protective masks or equipment are prohibited. When in uniform, the hair may touch, but not fall below a horizontal line level with the lower edge of the back of the collar. With jumper uniforms, hair may extend a maximum of 3.14 cm below the top of the jumper collar. 4. Long hair, including braids, which fall below the lower edge of the collar shall be neatly and inconspicuously fastened, pinned, or secured to the head. No portion of the bulk of the hair as measured from the scalp will exceed approximately 5 cm. A maximum of two small barrettes/combs/clips, similar to hair color, may be used in the hair. Additional bobby pins or rubber bands matching hair color may be used to hold hair in place, if necessary. Fabric elastics bands are not authorized. Hair ornaments shall not present a safety or hazard. Hairnets shall not be worn unless authorized for a specific type of duty. 5. The requirement for hair regulations is to maintain uniformity within a military population. Women’s hairstyles require non-eccentric styles. Female personnel will be well groomed at all times and when in uniform will abide by the following: a. Hair may touch the collar, but will not fall below the collar’s lower edge. Hair that would fall naturally below the collar’s lower edge will be neatly and inconspicuously fastened or pinned. During physical training periods in which physical training clothing is worn, hair will be allowed to fall naturally, without being fastened or pinned. This does not apply when conducting physical training in the utility uniform. b. Hair will be styled so as not to interfere with the proper wear of the uniform headgear. All headgear will fit snugly and comfortably around the largest part of the head without distortion or excessive gaps. Hairstyles, which do not allow the headgear to be worn in this manner, are prohibited. c. Faddish and exaggerated styles to include shaved portions of the scalp other than the neckline, designs in the hair, unsecured ponytails and styles which are distinctly unbalanced or lopsided are prohibited. Multiple braiding is authorized. If hair extensions are used in the braiding of the hair, the extensions must have the same general appearance as the individual’s natural hair. Braided hairstyles will be conservative, and conform to other guidelines listed herein.

R E S T R I C T E D

R E S T R I C T E D

71

d. Barrettes, combs, rubber bands, etc. are authorized, if concealed by the hair. Inconspicuous hairpins and bobby pins, if required, are authorized. Hairnets will not be worn unless authorized for a specific type of duty. Wigs, if worn in uniform, must look natural and conform to the above regulations. 1.7.2.3 Hairpieces Wigs or hairpieces shall be of good quality and fit, present a natural appearance and conform to the grooming standards set forth in these regulations. They shall not interfere with the performance of duty nor present a safety or hazard. 1. Men. Wigs or hairpieces may be worn by active duty personnel while in uniform or duty status only for cosmetic reasons to cover natural baldness or physical disfigurement. 2. Women. Wigs or hairpieces meeting women’s grooming standards are authorized for wear by personnel while in uniform or duty status.

GROOMING STANDARDS FOR WOMEN Haircuts and styles shall present a balanced appearance. Lopsided and extremely asymmetrical styles are not authorized. Ponytails, pigtails, widely spaced individual hanging locks, and braids, which protrude from the head, are not authorized. Multiple braids are authorized. No portion of the bulk of the hair as measured from the scalp shall exceed approximately 5 cm. Hair shall not fall below a horizontal line level with the lower edge of the back of the collar as indicated by line A. when wearing jumper uniforms, hair can extend a maximum of 3.14 cm below the top of the jumper collar.

Grooming Standards For Women

A A

5 cm

R E S T R I C T E D

R E S T R I C T E D

72

1.7.2.4 Shavings

1. The face shall be clean-shaven unless a shaving waiver is authorized by the Commanding Officer. Mustaches are authorized for health reasons but shall be kept neatly and closely trimmed. No portion of the mustache shall extend below the lip line of the upper lip. It shall not go beyond a horizontal line extending across the concerns of the mouth and no more than 0.6 cm beyond a vertical line drawn from the corner of the mouth. The length of an individual mustache hair fully extended shall not exceed approximately 1.3 cm. Handlebar mustaches, goatees, beards or eccentricities are not permitted. If a shaving waiver is authorized, no facial/neck hair shall be shaved, neither manicured, styled or outlined nor exceed 0.6 cm in length. Supervisors of individuals with shaving waivers shall actively monitor and ensure treatment regimen is followed. The following personnel are not authorized to wear any facial except for valid medical reasons: a. Stockade prisoners. b. Awardees stockade. c. Personnel in a disciplinary hold status (i.e., who are serving restriction or hard labor without confinement or extra duties as a result of a court-martial). d. Personnel assigned to a transient personnel unit who are awaiting separation: 1) By reason of a court martial sentence. 2) For the benefit of the service. 3) Pursuant to the recommendation or waiver of an administrative discharge board, for misconduct. 1.7.2.5 Fingernails 1. Male. Fingernails shall not extend past fingertips. They shall be kept clean. No nail polish of any kind is allowed for male personnel. 2. Female. Fingernails shall not exceed 0.6 cm measured from the fingertip. They shall be kept clean. Nail polish may be used, but colors shall be conservative and complement the skin tone.

R E S T R I C T E D

R E S T R I C T E D

73

Fingernails with multiple colors and decorative ornamentation that detracts from a standard conservative appearance are prohibited. 1.7.3 Uniform Appearance, Cuts and Fits The uniform appearance, cuts and fits should be prescribed in a manner as to represent a dignified and high esteemed style of dress without loose, long or disproportionate made of the uniform. When such appearance exists, the individual military personnel concerned is responsible in having it altered in an officially designated dress shop. 1.7.4 Cosmetics Cosmetics, if worn, will be applied conservatively and will complement the individual’s complexion tone. Exaggerated or faddish cosmetic styles are inappropriate with the uniform and will not be worn. Non-eccentric lipstick and nail polish colors, to include colorless nail polish, may be worn with all uniforms. Care should be taken to avoid an artificial appearance. Lipstick colors shall be conservative and complement the individual natural appearance. Long false eyelashes shall not be worn when in uniform.

1.7.5 Exceptions Based on Religious Practices

Practices involving religious activities should be done privately. However, whenever uniformity is required in the uniform aspect, individual concerned should abide by the prescribed regulation. 1.7.6 Wearing of Jewelries 1.7.6.1 Jewelry 1. Article that may be worn while in uniform includes inconspicuous wristwatches and rings. Conservative jewelry is authorized for all personnel and shall be in good taste while in uniform. Eccentricities or faddishness are not permitted. Jewelry shall not represent a safety hazard. Jewelry shall be worn within the following guidelines: a. Rings. While in uniform, only two rings are authorized, such are the wedding and the institution rings. Rings are not authorized for wear on thumbs. b. Earrings 1) Male. Not authorized at any time.

R E S T R I C T E D

R E S T R I C T E D

74

2) Female. Earrings are not authorized in civilian attire when in a duty status or while in/aboard any ship, craft, aircraft, or in any military vehicle or within any base or other place under military jurisdiction, or while participating in any organized military recreational activities. One earring per ear (centered on earlobe) may be worn while in uniform. Earrings shall be 4 mm – 6mm ball (approximately 1/8 – ¼ inch), plain with shiny or brushed matte finish, screw-on or with post. Gold for officers, and silver for enlisted personnel. Small single pearl earrings are authorized for wear with Dinner and Formal Dress uniforms. c. Body Piercing. Not authorized while in uniform. No articles, other than earrings for female specified above, shall be attached to or through the ear, nose, or any other body part. Additionally, body piercing is not authorized in civilian attire when in a duty status or while in/aboard any ship, craft, aircraft, or in any military vehicle or within any base or other place under military jurisdiction, or while participating in any organized military recreational activities. d. Necklaces/Choker. While in uniform, only one necklace may be worn however it shall not be visible when in uniform. e. Wristwatch/Bracelets. While in uniform, only one of each may be worn. Faddish or extravagant styles are not authorized. 1.7.7 Wearing of Sunglasses or Eyeglasses 1. Sunglasses may be worn on leave, liberty, and in garrison but not in formation with troops, unless the need to wear sunglasses has been certified by medical authorities. When authorized for wear in formations, sunglass lenses will be of standard green or dark green shade or may be the type commonly referred to as “photosensitive”. Eyeglasses/sunglasses, when worn, will be conservative in appearance. Eccentric or conspicuous eyepieces are prohibited. 2. Chains, bands, or ribbons will not be attached to eyeglasses; however, eyeglass restraints are authorized for safety purposes. 1.7.8 Wearing of Identifications and Tags ID’s shall be used in military establishments and offices and should be pinned on the right edge of the left breast pocket flap. ID’s with cord are not authorized when wearing military uniform. Dog Tags are standard issue and should be worn anytime in combat status.

R E S T R I C T E D

R E S T R I C T E D

75

1.8 RESTRICTIONS ON WEARING UNIFORMS 1.8.1 Restriction Policies 1. Members of the AFP including retired personnel are prohibited from wearing the AFP uniform while engaged in any of the following activities, functions, or circumstances unless specifically authorized by the Chairman, AFP Uniform Board. a. Soliciting funds for any purpose from the public outside of a military base or establishment.

b. Participating in any type of show or event, which is commercially sponsored for advertising purposes, where it could be implied or construed that the AFP “endorses” the product being advertised. c. “Endorsing” commercial products in such ways to involve the uniform, title, grade, or rate, or in any established or imply their military affiliation with such products. d. Appearing or participating in any event in public that would compromise the dignity of the uniform. 2. Whenever any doubt exists as to the propriety of wearing the uniform under circumstances similar to those enumerated above, specific requests should be directed to the Chairman, AFP Uniform Board. 1.8.1.1 Authorized Places to Wear Uniform

As prescribed by commanders concerned, military personnel may wear uniform when in an official function in places such as nightclubs, restaurants, groceries, shopping malls outside the base, business establishments and the likes.

1.8.1.2 Disposing Uniforms Caution must be exercised when disposing uniforms in order not to tarnish the image of the organization it represents. Also, for health reason, they should be discarded in accordance to the quartermaster regulation. 1.9 OBTAINING MILITARY UNIFORMS There are two distinct categories of uniforms and therefore two separate systems for obtaining.

R E S T R I C T E D

R E S T R I C T E D

76

1.9.1 Military Supply Item/Standard Issue Clothing 1. The first category is standard issue or clothing items which constitute minimum required uniforms and accessories for military personnel. These items are known as “system” items because they are obtained through the AFP Logistics Center and are made available through the military supply system. 2. The AFP Logistics Center is responsible for procuring standard uniform items for all services. They use the “best value” concept to evaluate contractor-clothing samples in order to make cost-saving multi-year buys. AFPLC is responsible to the Chief of Staff, through the DCS for Logistics, J4 in this matter and shall report the positive and effective qualities in the wear of uniform. 3. Retail Clothing Outlets (RCO’s) and Military Clothing Sales Stores (MCSS’s) buy standard issue items from AFPLC using normal Military Supply System procedures. Commands can purchase authorized organizational and/or supplemental clothing using this same procedure. 1.9.2 Non-Supply System/Optional Clothing 1. The second category of uniforms is commercial “non-system” or optional clothing items. These items are not available through the Military Supply System and therefore must be procured from commercially available sources. Optional uniforms and accessories to include all officer items can be procured through the commercial vendors. 2. Military personnel who purchase defective uniform clothing items from commercial vendors should report the purchase of defective clothing by letter to the Commanding Officer at the base where they are stationed, enclosing the defective item. Ensure that the following information is contained in the letter: name and address of store from which item was purchased, description of article, price, date purchased, name of manufacturer, and description of defect. 1.9.3 Commercial Vendors 1. Unit/Station/Base commanders will prohibit vendors from entering the confines of their activities for the purpose of displaying and/or selling uniform items/accessories without proper identification to indicate that specific uniform items/accessories have been approved by the AFPUB. All clothing items must be properly labeled to include Chairman, AFP Uniform Board approval identification, the fiber content of the garment and proper care and cleaning instructions. Instances

R E S T R I C T E D

R E S T R I C T E D

77

of nonconformance by an approved source will be reported to the Chairman, AFP Uniform Board. 2. Unless specifically authorized by these regulations, items purchased outside the Military Supply System and which do not bear approval identification are non-regulation, and wearing such items is prohibited. If an emergency makes it necessary to temporarily wear non-regulation clothing obtained from other sources, such clothing will be procured at the commander’s direction and conform as closely as possible to items prescribed herein. 3. Military personnel who purchase defective clothing items from authorized commercial vendors, other than the Military Supply System, are urged to report the purchase of defective clothing directly to the Chairman, AFPUB. When desirable, forward a sample defective item by registered mail. Ensure that the following information is contained in the report: name and address of authorized vendor from which the item was purchased, description of the article, price, date purchased, name of manufacturer, and description of defects. After examination and evaluation, the C, AFPUB will return the article via registered mail, annotated with the action taken on behalf of the individual.

4. Purchase of Uniform of Foreign Services

a. Military personnel are authorized to purchase uniforms of Foreign Services but are prohibited from using it with authorized AFP Uniforms. b. Commanders will ensure that uniforms purchased conform to AFP Uniform specifications and these regulations. Articles procured, manufactured, or issued will conform in every respect to the standard samples, and no change will be permitted without Chief of Staff, AFP approval. 1.10 MILITARY FEMALE UNIFORM 1. Female personnel shall wear their distinctive service uniform textiles, colors, and shades but the cuts and shape shall be that of the Technical Services to present a feminine appearance of female personnel. 2. All female military personnel shall wear their respective major service two-piece ensemble General Office Uniform consisting of the blouse and skirt from Monday to Friday, during office hours, flag-raising/morning colors and flag retreat/sunset colors, formal military occasions and other military ceremonies, and during official calls. Likewise, skirts shall be worn when inside military camps and in other places that requires formal attire.

R E S T R I C T E D

R E S T R I C T E D

78

3. Wearing of pants is only authorized during blue and red alert status or when in transit in connection with official travel and during Saturdays, Sundays and holidays. 4. WAC personnel shall wear their distinctive administrative service uniform when assigned/detailed at the General Headquarters, AFP. 5. As a general rule, when in doubt as to what type of uniform to wear, the skirt will have to be used. 6. Female personnel shall wear the prescribed headgear of a particular uniform. The Felt Cap (Green for the Army, Blue for the Air Force and White for the Navy) shall be the equivalent of the Pershing Cap. Oversea Cap is authorized for their use as that of the male personnel only on general office uniform or when traveling abroad. The standard headgear of the BDU shall also be authorized for their use. 7. Female personnel shall wear the prescribed shoes of the Technical Service that is the pump shoes. 8. Female personnel shall have their hair cut and groomed as prescribed in this Code. 9. Female personnel shall adhere to the regulations prescribed in this chapter in other matters relating to female personnel. 1.11 RELIGIOUS DRESS AND APPEARANCE PRACTICES 1. Definition of Religious Apparel. Religious apparel is defined as articles of clothing worn as part of the doctrinal or traditional observance of the religious faith practiced by the member. Hair and grooming practices required or observed by religious are not included within the meaning of religious apparel.

2. Organized Worship Services. Service members may wear any required religious apparel distinct to their faith group with the uniform while in attendance at organized worship. 3. Chaplains. Chaplains may wear any religious apparel required by their faith groups with the uniform while conducting worship service and during the performance of rites and rituals distinct to their faith groups. 4. Jewelry. Jewelry bearing religious inscriptions or otherwise indicating religious affiliation or belief may be worn subject to the same uniform regulations prescribed for jewelry that is not of a religious nature.

R E S T R I C T E D

R E S T R I C T E D

79

5. Religious Items During Ceremonial Details. Visible items of religious apparel shall not be worn while wearing historical or ceremonial uniforms; participating in similar ceremonial details and functions. 6. Normal Duty Hours. Religious items or articles not visible or otherwise apparent may be worn with the uniform, provided they do not interfere with the performance of the member’s military duties, or interfere with the proper wearing of any authorized article of the uniform. Commanding officers may approve individual requests for wear of authorized visible religious apparel (skullcaps) with the uniform. 7. Authorized Visible Religious Apparel. A black or hair colored yarmulke is the only authorized visible religious item or article, which may be approved for wear with the uniform. 1.12 RESPONSIBILITY FOR UNIFORM MATTERS 1.12.1 General Criteria in the Uniform Recommendations 1.12.1.1 Uniform Review and Development The Chief of Staff, AFP delegates to the AFP Uniform Board the review of military uniform matters and authorizes the use of the following specific qualitative criteria and factors, applicable to all uniforms, to evaluate suitability of current uniforms and those proposed for replacement. These criteria are not limited to the following: 1. Versatility. Flexibility and adaptability in terms of: (a) Number of personnel wearing uniforms, (b) Varied climates. 2. Safety. The ability to protect and not present any hazard to personnel or unit. 3. Ease of Maintenance. Laundering, cleaning, upkeep, and tailoring requirements. 4. Storage. Amount of space required for stowage for proper keeping. 5. Cost. Purchase price and maintenance costs should be considered par with durability. 6. Durability. Ability to present a neat appearance over a long period of time.

R E S T R I C T E D

R E S T R I C T E D

80

7. Tradition. Historical acceptance and longevity within the military service. 8. Recognition. The ease with which observers recognize the uniform and the wearer’s rank. 9. Military Appearance. How well the uniform displays a smart, crisp image. 10. Compatibility. Interchangeability among other uniform components. 11. Contemporary Appearance. Attitude of military members towards the uniform. 12. Comfort. Perceived physical satisfactions during wear especially longer wear. 1.12.2 Approving Authority in Uniform Recommendations and Changes The Chief of Staff, AFP exercises jurisdiction on all uniform matters and is the sole authority in any changes or alterations in the uniform regulations as recommended by the Chairman, AFPUB. The AFP Uniform Board will continually review the uniform situation in the AFP. Significant changes in styles, technical improvements in fabrics, problems reported by field commanders, and wearer’s views shall be considered in the review. 1.12.3 Major Service Commander’s Responsibilities in Uniform Matters All Major Service Commanders, Unified Command Commanders, and Commanders of the different AFP Wide Support Service Units down to the lowest AFP units are held responsible in the implementation of rules and regulations prescribed in this Code. They shall exercise wide role through the Provost Marshall as supervised by the different personnel staff officers in ensuring the widest dissemination and understanding of this Code.

R E S T R I C T E D

R E S T R I C T E D

81

CHAPTER 2

ARMY UNIFORMS

“A vital ingredient of the Army’s strength and military effectiveness is the pride and self-discipline that Army soldiers bring to their service.” 2.1 GENERAL 2.1.1 Purpose This chapter prescribes the authorized Philippine Army uniforms to be worn by the officers and enlisted personnel of the active and reserve components of the army. 2.1.2 Philippine Army Uniform Board Composition: Adjutant General, Philippine Army Chairman Quartermaster, Philippine Army Vice Chairman Provost Marshal, Philippine Army Member Deputy G1, Philippine Army Member Deputy G3, Philippine Army Member Deputy G4, Philippine Army Member Commanding Officer, 72-100 Member Chief, Morale & Welfare, G1, Philippine Army Member Chief, Morale & Welfare, Adjutant General, Member/ Philippine Army Secretary (Non- Voting) Sergeant Major, Philippine Army Member

R E S T R I C T E D

R E S T R I C T E D

82

2.2 OFFICIAL AND AUTHORIZED UNIFORMS 2.2.1 Formal Dress 2.2.1.1 Army Mess Jacket Uniform (AMJU) / Evening Dress – is composed of the Army black / white jacket, black high waist trousers, white pleated dress shirt, black cummerbund (sash). Male officers shall have the black jacket in their dinner dress uniform while female officers shall have the white jacket as their standard blouse. Description: 1. Materials a. Jacket – Fabric 100% polyester gabardine, black / white color. b. Trousers – Commercial, black, tuxedo type of light materials. 2. Jacket, Army Mess, White a. Design – The jacket shall be made from an approved specification or pattern. b. General Description – The jacket, which is cut on the lines of an evening dress coat, descends to the point of the hips and is slightly curved to a peak in back and in front. Two AFP regulation small brass button, joined by a small gold or gold color chain about 4 cm long may be worn in the upper buttonholes. The shoulders are provided with a means of attaching shoulder board on the officer uniforms. c. Jacket Sleeve Ornamentation – The cuff of sleeve shall have a black/white mercerized cotton braid, 1.5 cm wide sewn on each sleeve, with the lower edge parallel to and 7.5 cm above the bottom edge of each sleeve. 3. Trouser, Black a. Design – The trousers shall be made from an approved specification or pattern. b. General Description – The black trousers shall be cut along the lines of civilian dress trousers with a high waist, without pleats, cuffs, and hip pocket.

R E S T R I C T E D

R E S T R I C T E D

83

c. Trousers Leg Ornamentation – The trouser leg ornamentation shall have a black satin braid no less than 2 cm wide sewn on the outer seam of the trouser leg from the bottom of the waistband to the bottom of the trouser leg. 4. Cummerbund, Black a. Design – The cummerbund shall be made from a commercial design, made of silk or satin material with four pleats running the entire length of the cummerbund. b. Wear – All officers are to wear the black cummerbund with the Army Mess Jacket uniform. The cummerbund shall be of the same material as the bow tie. It shall be worn with pleats facing upward. 5. Shirts, White, Dress A commercial white long sleeve dress shirt with a soft bosom, French cuffs, and standard turndown collar shall be worn with Army mess jacket uniform. 6. Headgear The Army Service Cap is the authorized headgear for wear with Army Mess Evening Jacket uniform. The Army Green Felt Cap is the standard headgear for female officers in the mess uniform. 7. Shoulder Board The shoulder board for this uniform shall be similar to Army White Duck and Army Green Uniform. 8. Occasions for Wear a. Formal Evening Socials b. When performing attaché positions c. As prescribed by the Commander 2.2.1.2 Army White Duck Uniform (AWDU) – is composed of Army white coat and trousers, white shirt and black tie.

R E S T R I C T E D

R E S T R I C T E D

84

Descriptions: 1. Materials a. Coat and Trousers. The material for this uniform is gabardine, 100% polyester, white. b. Headgear. Wool felt, green shade. c. Shoulder Board. Green Shoulder Board. 2. Coat, Army White Duck a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The white coat is a single-breasted, peaked lapel, four (4) button as per regulation extending below the crotch, fitting easily over the chest and shoulders with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and no prominent flare. c. Coat Sleeve Ornamentation – The sleeve shall have a band of white mercerized cotton braid, 1.5 cm wide. Sewn on each sleeve, with the lower edge parallel and 7.5 cm above the bottom edge of each sleeve. 3. Trousers, Army White Duck a. Design - The trousers shall be made from an approved specification or pattern. b. General Description – The trousers are straight legged, without cuffs, and white side and hip pockets cut in civilian style. Trousers made from 100% polyester should be lined. There shall be no ornamentation on the Army white trousers. 4. Shirt, White A commercial long sleeve white shirt with barrel of French cuff and standard turn down collar shall be worn.

R E S T R I C T E D

R E S T R I C T E D

85

5. Service Cap, Army White Duck

a. Design – The service cap shall be made as specified in Chapter 1 of this Code. b. General Description – The cap shall be of a standard Army service (green) cap design. (See Headgear Chapter 1)

c. Visor and Visor Ornamentation –

The visor shall be of plain black leather. The visor ornamentation is as follows: 1) General and Field Grade Officer – The top of the visor shall be black cloth with two arcs of laurel leaves in group of two, embroidered in gold bullion or synthetic metallic gold colored yarn or manufactured form anodized aluminum in 24 karat gold color. 2) Company Grade Officers – The top of the visor shall be of plain black shell cordovan or shell cordovan finish leather, resin treated, with a waterproof edge. d. Hatband – Hatband shall be of black nylon braid, 4.4 cm in width, around the entire outside rim of the cap. e. Wear – The Army White Duck Service Green Cap shall be worn by all officers with the Army White Duck, Mess Jacket and Army Service Green Uniforms. 6. Occasions for Wear a. Weddings b. New Year’s Call (Malacañang) c. Oath-taking d. Awarding Ceremonies as a Recipient e. AFP Day when prescribed

Service Cap, Army

R E S T R I C T E D

R E S T R I C T E D

86

f. State of the Nation Address (SONA) of the President g. Principal/Host during Send-Off/Arrival of the President/VP h. Independence Day i. Pallbearers 2.2.2 Semi-Formal Dress 2.2.2.1 Army Service Blouse Descriptions: 1. Composition Army Service Blouse is composed of coat and trousers, and green long sleeve and a green four-in-hand necktie. 2. Materials Coat and Trouser – the fabric for coat and trouser shall be gabardine twill weave, 100% polyester army green. 3. Coat and Service Blouse a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The coat shall be single-breasted, peak-lapel, four (4) AFP Regulation big buttons, coat extending below the crotch, fitting easily over the chest and shoulder, with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and with no prominent flare. c. Coat Sleeve Ornamentation 1) Officers – The sleeve shall have a band of black mesmerized cotton braid, 2 cm wide, sewn on each sleeve with the lower edge parallel to and 7.5 cm above the bottom edge of each sleeve. 2) Enlisted Personnel – The sleeve shall have a chevron and service stripes corresponding to the rank and branch of service.

R E S T R I C T E D

R E S T R I C T E D

87

4. Trousers, Service Blouse a. Design – The trouser shall be made from an approved specification or pattern. b. General Description – The trouser shall be straight legged, without cuffs and with side and hip pockets. c. Trouser, Leg Ornamentation – Braid or black satin piping, 0.5 cm will be sewn on each outside seam of the bottom of the trouser leg. 5. Headgear – The Army service cap is the standard headgear in this uniform. Female officers shall have the Army green felt cap. The cap shall be made from an approved specification or pattern. Materials: Officers – wool felt, green color. Enlisted Personnel – same as the coat or trouser material. 6. Rank Insignia – Metallic rank insignia fastened on the shoulder straps. 7. Occasions for Wear a. Major Service Anniversary b. Witnessing Honors for President/VP c. Courtesy Calls d. New Year’s Call at GHQ/DND e. As maybe prescribed by the Commander 2.2.2.2 Army Bush Coat 1. Materials a. Coat and Trouser – The fabric for coat and trousers shall be gabardine, twill weaves, 100% polyester green.

R E S T R I C T E D

R E S T R I C T E D

88

b. Army Green Shirt – The fabric shall be twill weave, 100% polyester shade-mint green. 2. Coat, Bush Coat a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The coat is single-breasted, midsection button is hidden with built-in belt, and sleeves side pressed fitting easily over the chest and shoulder, with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and with no prominent flare. 3. Trouser, Bush Coat a. Design – The trouser shall be made from an approved specification or pattern. b. General Description – The trouser shall be straight legged, without cuffs and with side and hip pockets. c. Trouser, Leg Ornamentation – Braid or black satin. Piping shall be sewn on each outer seam of the trouser leg 3.14 cm width. 4. Headgear The Army Service Cap is the standard headgear in this uniform. Female officers shall have the Army Green Felt Cap. The cap shall be made from an approved specification and pattern. Materials: Officers – Wool felt, green color. Enlisted Personnel – same as the coat or trouser material. 5. Undershirt – White, cotton fabric, round-neck shape. 6. Rank Insignia – metallic rank insignia fastened on the straps.

R E S T R I C T E D

R E S T R I C T E D

89

7. Occasions for Wear a. Unit/Office Anniversary b. Graduation/Commencement Exercises c. Testimonial Parades d. Social Functions (Lower than President/VP) e. Send-off to the President, as directed by the CSAFP f. Funeral /Burial Ceremonies g. As maybe prescribed by the Commander . 2.2.2.3 Working Uniforms As prescribed by the Commander when inside own camp. 2.2.2.4 General Office Uniform (GOU) Descriptions: 1. Composition GOU Green Uniform is composed of Army green trousers and mint green short sleeve. 2. Materials a. Shirt, GOU Green – The fabric shall be twill weave, 100% polyester shade-mint green. b. Trousers – The fabric shall be gabardine, twill weave, 100% polyester shade-dark olive drab. 3. Design a. Trouser, GOU

1) Design – The trouser shall be made from an approved specification or pattern. 2) General Description – The trouser shall be straight legged, without cuffs and with side and hip pockets.

R E S T R I C T E D

R E S T R I C T E D

90

3) Trouser, Leg Ornamentation – Braid or black satin piping, 0.5 cm will be sewn on each outer seam of the trouser leg. b. Shirt, GOU – The shirt is a dress type with shoulder straps (for officers), seven buttons, front, and two pleated pockets with button down flaps, and short sleeve. Enlisted shirt shall have no shoulder strap. The shirt has a convertible collar and may be worn with or without a green four-in-hand necktie.

4. Headgear – Oversea / Garrison Cap, both male and female personnel, is the standard headgear for this type of uniform. a. Design – The cap shall be made from an approved specification or pattern. Materials: Officers – wool felt, green color. Enlisted Personnel – same as the coat or trouser material. b. Ornamental Braid – Garrison / Oversea cap braid refers to the piping used for additional identification purposes that is sewed to the tip of the curtain of the garrison cap.

Officers’ GOU Shirt (With Shoulder Strap)

Enlisted GOU Shirt (Without Shoulder Strap)

Shirt (Back)

Shoulder Strap

R E S T R I C T E D

R E S T R I C T E D

91

5. Undershirt – White, cotton fabric, round-neck shape. 6. Shoulder Loop – Shoulder loops shall have silver rank insignia. 7. Occasions for Wear a. The GOU green is acceptable as semiformal uniform and can be used during social functions as prescribed by the commander. b. GOU Green is a duty uniform for garrison or installation. 2.2.2.5 Battle Dress Uniform (BDU) Descriptions: 1. Composition Composed of a camouflage coat, trousers and beret/lousy hat, camouflage cap. 2. Materials a. The fabric is 100% cotton, rip stop, in a four-color camouflage pattern. b. Coat, Camouflage Pattern – The coat is a single breasted “bush type” design with a black yoke, collar, four patch below type pockets with flaps (two upper and two lower). The coat has a straight cut bottom, waist take-up tabs on both sides, and cuffed sleeves with reinforcement patches at the elbows. c. Trousers, Camouflage Pattern – The trousers contain four standard type pockets. Reinforcement patches have been added at knees and buttocks. The trousers have adjustable straps at waist and leg hem draw cords. d. The beret, utility cap and lousy hat, camouflage 100% cotton shall be the authorized headgears for Battle Dress Uniform. The use of lousy hat is more convenient than the utility cap or commonly called ball cap and functionally designed for ease and comfort. It can be placed inside the pocket or combat pack. However, to maintain

R E S T R I C T E D

R E S T R I C T E D

92

uniformity regarding their proper usage, these headgears shall be used for the following: 1) Beret – used within garrisons (Brigade level and higher or its equivalent) and during parade/ceremonies. 2) Lousy Hat / Utility Cap Camouflage – used only in field/combat operations, field training exercises, fatigue duties and by candidate soldiers under training. 3. Undershirt – It should be olive drab green, cotton fabric, round-neck shape and with Army marking printed on the left breast. 4. Occasions for Wear BDU may only be worn on duty when prescribed by the Commander. This uniform is used as utility, field training, or combat uniform and is not to be worn as an all-purpose uniform when other uniforms are more appropriate. This may also be used by parading elements during ceremonial activities and during red alert status. Variations in the combination with other uniforms may however be prescribed by Commanders. 2.2.2.6 Physical Fitness or Athletic Uniform Descriptions: 1. Composition a. Olive drab green, cotton fabric, round-neck shape and with Army marking printed on the left breast. b. Olive drab short pants with “Army” marking printed on the lower right thigh. c. Dominant white rubber shoes

d. White Socks 2. Occasions for Wear The physical fitness or athletic uniform may be worn on and off duty when authorized by the Commander when engaged in physical training both on and off the military installation. This uniform may be worn in transit between the individual’s common quarters and duty station.

R E S T R I C T E D

R E S T R I C T E D

93

Soldiers may wear all or parts of the athletic uniform at their discretion, when not in the installation. 2.2.3 Other Uniforms 2.2.3.1 Army Black Uniform (ABU) Descriptions: 1. Composition Composed of black coat and trousers and black beret. 2. Materials a. The fabric is 65% polyester and 35% cotton, twill weave, black for coat and trousers. b. Coat Black – The coat is a single breasted “bush type” design with a back yoke, collar, four patches below type pockets with flaps (two upper and two lower). The coat has a straight cut bottom and waist take-up tabs on both side. c. Trousers, Black – The trousers contain four standard type pockets and two leg below type pockets. Reinforcement patches have been added at buttocks. The trousers have adjustable straps at waist and leg hem draw cords. d. Beret, Black – is wool knitted outer shell lined with silica interlining and with a sweatband. A rayon adjusting ribbon is threaded through the binding. The beret is equipped with a stiffener on the left front and has two eyelets with an eyelets protector on the right side. Except for color, all classes of organizational berets are the same. 3. Occasions for Wear a. The black uniform is authorized for year round wear on duty by all personnel assigned with the Scout Ranger units and may also be worn as prescribed by the Commander. b. The ABU is a field or combat uniform and is not to be worn as an all-purpose uniform when other uniforms are more appropriate.

R E S T R I C T E D

R E S T R I C T E D

94

2.2.3.2 Combat Vehicle Crewman Uniform (CVCU) Descriptions: 1. Composition The Coverall – is a one-piece design that has a front entry zipped closure; drop seat; extraction strap located on the left sleeve, chest, right and left sides, right-left front hips, right-left upper thigh and right-left lower legs. All pockets have slide fastener closures. 2. Materials a. The fabric is 100% cotton, rip stop, in a four-color camouflage. b. Black Organizational Beret – is the standard headgear for the CVC uniform when CVC helmet is not being worn. 3. Occasions for Wear a. The Combat Vehicle Crewman (CVC) uniform is authorized for year-round wear on duty by all personnel assigned with the armor unit and may also be worn as prescribed by the Commander. b. The CVCU is a field or combat uniform and is not to be worn as an all-purpose uniform when other uniforms are more appropriate. 2.2.3.3 Military Police Uniform (MPU) Descriptions: The MPU is composed of coat, trousers (BDU or Army Green) and white service cap (Pershing Cap or White Helmet). 1. Class C2 (GOU/Green) and Class D (BDU) are the types of uniform authorized for military police personnel. 2. Description of MP accessories: a. White Sam Brown belt with complete accessories.

R E S T R I C T E D

R E S T R I C T E D

95

b. Blue brass and with white letters “MP” c. Police nightstick d. Whistle, brass with brass chain e. Blue lanyard f. MP Strip White Service (Pershing cap) OD g. White helmet liner with letters “MP” 3. The above articles listed above are authorized to wear with GOU Green and BDU by MP personnel while performing MP duties. When wearing combat boots with service uniform trousers, the trousers will be tucked-in. 4. Occasions for Wear The Military Police (MP) uniform is authorized for year-round wear on police duty by all personnel assigned with the Military Police unit or when performing military police activities or functions. 2.2.3.4 Army Gala Green Uniform (AGGU) Descriptions: 1. Composition Composed of green coat, white trousers, service blouse with Pershing cap and white gloves. 2. Materials a. Coat – Gabardine, twill weave, green 100% polyester. b. Trousers – Gabardine, twill weave, white, 100% polyester.

R E S T R I C T E D

R E S T R I C T E D

96

3. Coat, Gala Green a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The coat shall be single-breasted, peak-lapel, stand-up collar, five-button coat extending below crotch and neck, fitting easily over the chest and shoulders with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and no prominent flare. c. Shoulder Aiguillette – Officers and Enlisted Personnel shall attach the aiguillette on the gala green coat depending on the position in which the aiguillette is worn as prescribed in Chapter 1 of this Code. d. Coat Sleeve Ornamentation – Ornamentation or band shall be worn on both sleeves of the Gala green. The band shall measure 8.5 cm in width and 16 cm in length. Gold color nylon or rayon braid is authorized for Officers and Enlisted Personnel. The band on the neck and the coat sleeve shall be of the same material. The bottom of the sleeve band shall be positioned parallel to and 6 cm above the bottom of each sleeve. 1) Officers – The band shall have arcs of laurel leaves in-group around the edge of the band, 2.5 cm in width embroidered gold or synthetic metallic gold colored braid. 2) Enlisted Personnel – The band shall be plain gold color nylon or rayon with embroidered infantry service insignia. e. Coat Neck Ornamentation – Ornamentation band shall be worn on both edge tip of stand-up collar of Gala green. The band shall measure 4 cm in width and 9 cm in length. The band shall be placed parallel to the tip of the collar. 1) Officers – The band shall have arcs of three pairs of laurel leaves at the center of the band, 2.5 cm in width embroidered gold or synthetic metallic gold colored braid. 2) Enlisted Personnel – The band shall be plain gold color nylon or rayon.

R E S T R I C T E D

R E S T R I C T E D

97

4. Trousers, Gala Green a. Design – The trousers shall be made from approved specification or pattern. b. General Description – The trouser shall be straight legged without cuffs and with hip pocket. The hip pocket has a buttonhole tab and button. c. Trouser Leg Ornamentation – Braid, gold color shall be sewn on each outside seam of the trouser leg from the bottom of the waistband to the bottom of the trouser leg as follows: 1) Officers – Each trouser leg shall have two 1 cm wide gold mercerized cotton or satin braid sewn 1 cm apart. 2) Enlisted Personnel – Each leg shall have one 1 cm wide gold mercerized cotton braid. 5. Service Cap, Gala Green a. Design 1) Officers – The service cap shall be of a standard Army design in accordance with approved specification or pattern. 2) Enlisted Personnel – Material shall be made of the material listed for coat, Gala Green. The chinstrap shall be of plain black leather matching the visor in appearance with rounded ends. The top of the visor shall be of plain black cordovan finish leather with a waterproof edge. Cap insignia shall be worn on the service cap, secured through the front eyelet provided thereon. 6. Occasions for Wear The Army Gala Green Uniform shall be the authorized and official uniform of the Security and Escort Battalion of the Philippine Army while attending or performing ceremonial activities i.e. parade and honor. The Commanders shall prescribe other occasions for wear of the uniform.

R E S T R I C T E D

R E S T R I C T E D

98

2.2.3.5 Army Gala Rayadillo Uniform (AGRU) Descriptions: 1. Composition Composed of light gray coat, dark gray trouser, white gloves and two classes of headgear – Katipunan Hat and Bustipol Hat. 2. Materials a. Coat – Fabric, nylon cord, light gray color. b. Trousers – Fabric, palm beach or oxford, 100% polyester, dark gray color. c. Band/Ornamentation – Fabric, water repellant, maroon color. 3. Coat, Gala Rayadillo a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The coat is single-breasted “bush type” design, stand-up collar, and no pocket, fitting easily over the chest and shoulders with a slight draped effect in front and back. The coat shall be fitted slightly and conforming to the figure without tightness and no prominent flare. c. Shoulder Aiguillette – Officers and Enlisted Personnel shall attach the aiguillette on the left shoulder seam of the Gala Rayadillo coat. d. Shoulder Loops for Officers – On each shoulder, a shoulder loop of the same material as used for the coat will be attached. Shoulder loops are not necessary for the Enlisted Personnel Rayadillo coat. e. Coat Sleeve and Neck Ornamentation – Ornamentation or band shall be worn on both sleeves, and neck tip collar of the Army Gala Rayadillo. The sleeve band shall act as a cuff of the coat for Officers and Enlisted Personnel and shall measure 9 cm

R E S T R I C T E D

R E S T R I C T E D

99

wide and 12 cm at the embroidered service insignia. The bottom of the sleeve band will be positioned parallel to the edge of each sleeve. 1) Officers – The cuffs or band shall have arcs of laurel leaves in group of two and infantry service insignia, embroidered in silver or synthetic metallic silver yarn. 2) Enlisted Personnel – The cuffs or band shall have an infantry service insignia, embroidered in silver or synthetic metallic silver yarn. 4. Trousers, Gala Rayadillo a. Design – The trousers shall be made from an approved specification or pattern. b. General Description – The trousers shall be straight legged without cuffs and with hip pockets. The hip pocket shall have buttonholes tab and buttons. c. Trouser Leg Ornamentation – Braid maroon color shall be sewn on each outside seam of the trouser leg from the bottom of the waistband to the bottom of the trouser as follows: 1) Officer – Each trouser shall have two 1 cm wide maroon mercerized cotton or satin braids sewn 1 cm apart. 2) Enlisted Personnel – Each trouser leg shall have one 1 cm mercerized cotton or satin braid. 5. Headgear, Service Hat, Gala Rayadillo a. Design – The service hat (Katipunan and Bustipol) shall be made from an approved specification or pattern. b. Materials – Local “buri” or “banig” weave shall be the materials of Katipunan and Bustipol hat. c. General Description 1) Katipunan Hat – The hat shall be round shaped. The center of the brim of flap will be snapped and appropriate cap insignia coat of arms for Officers and Enlisted Personnel shall be attached to the center of the folded flap.

R E S T R I C T E D

R E S T R I C T E D

100

2) Bustipol Hat – The hat is oval shaped with band made of water repellant material, olive drab color with five pleats facing up running the entire length of the band shall be fastened and centered at the wearer’s head. The hat shall have a round shaped brass crown 5 cm in diameter at the top of the hat. Black leatherette piping shall be attached to the edge of the hat. Appropriate cap insignia, coat of arms for Officers and Enlisted Personnel, shall likewise be attached to the center of the hat. 6. Occasions for Wear The Army Gala Rayadillo uniform shall be the authorized and official gala uniform of the Security and Escort Unit of the Philippine Army while attending or performing ceremonial activities, i.e. parade and honors. 2.2.4 Authorized Items On Uniforms 2.2.4.1 Mess Jacket 1. Shoulder board with rank insignia 2. Miniature Awards and Decorations 2.2.4.2 Army White Duck 1. Shoulder board with rank insignia 2. Coat of Arm 3. Eligibility / AFOS insignia 4. Military badges 5. Military awards and decorations 6. Nameplate

2.2.4.3 Army Service Blouse 1. Metal rank insignia pinned on shoulder strap with corresponding metal buttons, shoulder strap is 15.24 cm in length, 4.44 cm wide at button base, 3.81 cm wide at base, 3.81 cm wide at tip and rank insignia 2.54 cm from base. 2. Coat of Arms 3. Eligibility / AFOS Insignia 4. Military Badges 5. Nameplate

R E S T R I C T E D

R E S T R I C T E D

101

2.2.4.4 Bush Coat 1. Metal rank insignia pinned on shoulder strap with corresponding metal buttons, shoulder strap is 15.24 cm in length, 4.44 cm wide at button base, 3.81 cm wide at base, 3.81 cm wide at tip and rank insignia 2.54 cm from base. 2. Eligibility / AFOS insignia 3. Military badges 4. Military awards and decorations 5. Nameplate For White Duck, Army/GOU Green, Bush Coat, Army Gala and Military Police Uniforms, the nameplate is made of plastic with white borderline 77 mm in length and 20 mm in width with 8 mm lettering in black background (See Chapter 1, Nameplate). Ribbons should be made of silk moiré fabric and worn above the left breast pocket in rows, metal rank insignia fastened on the shoulder strap is worn except for GOU Green/MP uniforms that require shoulder loop. 2.2.4.5 General Office Uniform (GOU) 1. Shoulder loop with rank insignia for officer 2. Eligibility / AFOS insignia 3. Military badges 4. Military awards and decorations 5. Nameplate 2.2.4.6 Battle Dress Uniform 1. Officer a. Rank insignia b. Eligibility / AFOS insignia c. Service patch d. Unit patch e. Service cloth/ tape f. Name cloth or tape g. Military badges (cloth) 2. Enlisted Personnel a. Eligibility / AFOS insignia b. Service patch c. Unit patch d. Army strip or service cloth/tape

R E S T R I C T E D

R E S T R I C T E D

102

e. Name cloth/tape f. Military badges (cloth) g. Coat of Arm h. Chevron rank insignia 2.2.4.7 Athletic Uniform 1. Olive drab, cotton fabric t-shirt, round-neck shape and with Army marking printed on the left breast and olive drab pants with “Army” marking printed on the lower part of the thigh. 2. Dominant white rubber shoes and white socks. 2.2.4.8 Army Black Uniform 1. Eligibility / AFOS insignia 2. Service patch 3. Unit emblem patch (Ranger) 4. Army strip or Service cloth/tape 5. Name cloth/tape 6. Military badges (cloth) 7. Coat of Arm (for EP) 8. Rank insignia (Officer)/Chevron rank insignia (EP) Army strip and name cloth for BDU, Combat Vehicle uniforms shall be made of cloth from BDU (back side) with black borderline and black letters except for Army Black which shall have red borderline, letters sewn in red and in black background. Unit patch shall be placed on the left upper sleeve and service patch on the upper right sleeve of the uniform. 2.2.4.9 Combat Vehicle Crewman Uniform 1. Name cloth 2. Army strip or service cloth/tape 3. Eligibility insignia 4. Unit patch 5. Badges (cloth) 2.2.4.10 Military Police Uniform 1. Rank shoulder loop (Officer)/chevron rank insignia (EP) 2. Military ribbon and badges

R E S T R I C T E D

R E S T R I C T E D

103

3. Nameplate 4. MP strip 5. Lanyard white (Officer)/ Lanyard blue (EP) – shall be placed on the right shoulder extending under the armpit. 6. White Sam Brown Belt with complete accessories. 7. Holster with pistol 8. Collar insignia (EP) 9. Brassard (EP) – shall be placed on the left shoulder. 10. Police nightstick, white 11. Brass whistle 2.2.4.11 Army Gala Green 1. Shoulder board with rank insignia (Officer) 2. Awards and decorations 3. Black Sam Brown Belt (Officer)/White belt with buckle (EP). 4. Army seal 5. Nameplate 6. White gloves 7. Aiguillette 8. Unit seal 2.3 UNIFORM ITEMS 2.3.1 Headgears and Caps 2.3.1.1 Mess Jacket 1. Green Wool Pershing Cap (male officer). 2. Green Felt with AFP coat of arms (female officer). 2.3.1.2 White Duck 1. Green Wool Pershing Cap (male). 2. Green Felt with AFP coat of arms (female). 2.3.1.3 Service Blouse 1. Green Wool Pershing Cap (male). 2. Green Felt with AFP coat of arms (female).

R E S T R I C T E D

R E S T R I C T E D

104

2.3.1.4 Bush Coat

1. Green Wool Pershing Cap (male/female). 2. Green Felt Cap with AFP coat of arms (female). 2.3.1.5 General Office Uniform (GOU) for Officers and EP 1. Officer a. Green Wool Pershing Cap (male) / Green Felt Cap (female). b. Oversea Cap with AFP coat of arms (male / female). c. Beret, Green with black rank insignia (male/female) assigned SEB, MP, LABde and SOCOM.

d. Green Felt Cap with coat of arms (female). 2. Enlisted Personnel a. Oversea Cap (male/female). b. Green Felt (female). c. Beret Green (male/female). d. Helmet Liner, white with “MP” letter for MP unit.

Camouflage/Utility Cap, BDU

Service Cap, Formal/Semi-formal Dresses

R E S T R I C T E D

R E S T R I C T E D

105

2.3.1.6 Battle Dress Uniform (BDU) 1. Officer a. Beret, Green with black rank insignia (male/female) b. Camouflage/Utility Cap (male/ female). c. Lousy Hat, camouflage (male/ female). 2. Enlisted Personnel a. Beret, green with PA seal (male/female). b. White Service Pershing Cap for MP units. c. Camouflage/Utility Cap (male/ female).

d. Lousy hat, camouflage (male/ female). 2.3.1.7 Army Gala Uniform 1. Green Wool Pershing Cap (male). 2. Black Cap with AFP coat of arms (female). 2.3.1.8 Army Gala Rayadillo Uniform Katipunan Hat. 2.3.1.9 Combat Vehicle Crewmen Uniform 1. Combat Vehicle Crew Helmet. 2. Beret, Green with unit logo. 2.3.1.10 Army Black Uniform Beret, Black with unit logo. 2.3.1.11 Athletic Uniform As prescribed by Commanders.

R E S T R I C T E D

R E S T R I C T E D

106

2.3.2 Footwear 2.3.2.1 Mess Jacket 1. Shoes, Dress, Low Cut, Clarino with regulation socks. 2. Pump shoes with regulation hose (female). 2.3.2.2 White Duck 1. Shoes, Dress, Low Cut, Clarino with regulations sock. 2. Pump shoes with regulation hose (female). 2.3.2.3 Service Blouse 1. Shoes, Dress, Low Cut, Clarino with regulation socks. 2. Pump shoes with regulation hose (female). 2.3.2.4 Bush Coat 1. Shoes, Dress, Low Cut, Clarino with regulation socks. 2. Pump shoes with regulation hose (female). 2.3.2.5 GOU for Officer and EP 1. Shoes, Dress, Low Cut, Clarino with regulation socks. 2. Pump shoes with regulation hose (female). 3. Boots, Combat, Field Use for SOCOM, LABde, and SEB (tuck-in-pants). 4. Boots, Combat, Field Use for MP, with white shoelace (tuck-in-pants).

Male Shoe, Gibson Type Lightweight

Pump Shoe, Female Without ornamentations

Boots, Combat (Male, Female)

R E S T R I C T E D

R E S T R I C T E D

107

2.3.2.6 Battle Dress Uniform (BDU) 1. Boots, Combat, Field Use, tuck-in with regulation socks. 2. Boots, Combat, Field Use with white shoelace (MP Unit). 2.3.2.7 Army Gala Green Uniform 1. Shoes, Dress, Low Cut, Clarino with regulation socks. 2. Pump shoes with regulation hose (female). 2.3.2.8 Army Gala Rayadillo Uniform Boots, Combat, Leather Clarino. 2.3.2.9 Combat Vehicle Crewmen Uniform Boots, Combat, and Field Use. 2.3.2.10 Army Black Uniform Boots, Combat, and Field Use. 2.3.2.11 Athletic Uniform Dominant white rubber shoes or as prescribed by the Commanders. 2.3.3 Belt and Buckle 2.3.3.1 Army White Duck Stainless buckle with army logo and olive drab (OD) garrison web belt. 2.3.3.2 Army Service Blouse Stainless buckle with army logo and olive drab (OD) garrison web belt.

R E S T R I C T E D

R E S T R I C T E D

108

2.3.3.3 Army Bush Coat Stainless buckle with army logo and olive drab (OD) garrison web belt. 2.3.3.4 General Office Uniform (GOU) 1. Stainless buckle with army logo and garrison web belt olive drab (OD).

2. Pistol Belt, White with Holster for MP. 2.3.3.5 Battle Dress Uniform (BDU) 1. Pistol Belt – when an officer carries his pistol. 2. Suspender Belt – when things are being supported (i.e. Pistol, Ammo etc). 3. Garrison web belt olive drab (OD) and stainless buckle with army logo. 4. Sam Brown Belt, white for MP. 5. Pistol belt, white with holster for MP. 2.3.3.6 Army Gala Uniform 1. Garrison web belt, olive drab (OD) and stainless buckle with PA logo. 2. Sam Brown Belt, black, officer. 3. White belt, brass buckle with PA seal (EP). 2.3.3.7 Army Rayadillo Uniform 1. Garrison web belt, olive drab (OD) and stainless buckle with PA logo. 2. Sam Brown belt, black. 2.3.3.8 Combat Vehicle Crewmen Uniform As prescribed by the commanders.

Army Service Buckle

Service Seal Sliver/Chrome Plated or Stainless

R E S T R I C T E D

R E S T R I C T E D

109

2.3.3.9 Army Black Uniform Garrison web belt, olive drab (OD) and stainless buckle with PA logo. 2.3.3.10 Athletic Uniform With belt / garterized – without belt. 2.4 INSIGNIA AND AWARDS 2.4.1 Insignia/Ranks 2.4.1.1 Mess Jacket For officer, a metal rank insignia shall be placed on both shoulder boards. Coat of Arms on both upper collar lapels. 2.4.1.2 White Duck 1. For officer, a metal rank insignia shall be placed on both shoulder boards of the uniform. AFP Coat of Arms shall be placed on both side of upper collar lapel while eligibility insignia shall be at the lower lapel. 2. For enlisted personnel, the rank insignia shall be placed on the lower lapel while eligibility insignia shall be at the lower lapel. 2.4.1.3 Service Blouse For officer, the usual metal rank insignia pinned on shoulder strap with corresponding metal buttons. Shoulder strap is 15.24 cm in length, 4.44 cm wide at base, 3.81 cm wide at tip and rank insignia 2.54 cm from base. AFP coat of arms shall be placed on both side of upper collar lapel while eligibility insignia shall be at the lower lapel. 2.4.1.4 Bush Coat 1. For officers, the usual metal rank insignia pinned on shoulder strap w/ corresponding metal buttons. Shoulder strap is 15.24 cm in length, 4.44 cm wide at base, 3.81 cm wide at tip and rank insignia 2.54 cm from base. The eligibility insignia shall be on the left center pocket.

R E S T R I C T E D

R E S T R I C T E D

110

2. For enlisted personnel (Sgt Majors only), no insignia shall be placed on both shoulders of the uniform. Coat of Arms on both collars. 2.4.1.5 GOU Green 1. For officer, rank insignia with shoulder loop shall be placed on both shoulders of the uniform. The eligibility insignia shall be placed at the center of the left breast pocket. 2. For enlisted personnel, rank chevrons shall be placed on both shoulder sleeves of the uniform. 2.4.1.6 Battle Dress Uniform (BDU) 1. For officer, a rank insignia (cloth) shall be placed on the right collar while eligibility badge will be on the left collar. The occupational specialty badge shall be atop the service cloth/tape on the left pocket. 2. For enlisted personnel, a rank insignia shall be placed on the right collar while eligibility badge will be on the left collar. The occupational specialty badge shall be atop the service cloth/tape on the left pocket. 2.4.1.7 Ratings/Specializations 1. Insignias such as Ranger and Special Forces are eligibility badges hence shall be placed on the left center pocket of all military uniforms.

2.4.2 Awards 2.4.2.1 Authorized Army Awards 1. Decorations a. Medal of Valor (MOV) b. Distinguished Conduct Star (DCS) c. Distinguished Service Star (DSS) d. Gold Cross (GC) e. Philippine Legion of Honor (PLOH) 1) Chief Commander 2) Commander 3) Officer 4) Legionnaire

R E S T R I C T E D

R E S T R I C T E D

111

f. Outstanding Achievement Medal (OAM) g. Gawad sa Kaunlaran (GSK) h. Bronze Cross (BC) i. Military Merit Medal (MMM) j. Silver Wing Medal (SWM) k. Military Commendation Medal (MCM) l. Wounded Personnel Medal (WPM) m. Military Civic Action Medal (MCAM) n. AFP Conduct Medal (AFPCM) o. Sagisag ng Ulirang Kawal (SUK) 2. Service Medals and Ribbons a. Long Service Medals (LSM) b. United Nations Service Medal & Ribbon (UNSMR) c. Anti-Dissidence Campaign Medal & Ribbon (ADCMR) d. Luzon Anti-Dissidence Campaign Medal & Ribbon (LADCMR) e. Visayan Anti-Dissidence Campaign Medal & Ribbon (VADCMR) f. Mindanao Anti-Dissidence Campaign Medal & Ribbon (MADCMR) g. Disaster Relief and Rehabilitation Operation Ribbon (DRROR) 3. Badges a. Philippine Republic Presidential Unit Citation Badge (PRPCUB) b. AFP Enlisted Personnel of the Year Badge c. Combat Commander’s (Kagitingan) Badge (CC (K) B) d. Marksmanship Badge e. AFP Parachutist Badge f. Inspector General Service (IGS) Badge

g. Adjutant General Service (AGS) Badge h. All other occupational specialty and functional or eligibility badges listed in Chapter 1 of this Code.

R E S T R I C T E D

R E S T R I C T E D

112

4. Streamers a. Presidential Streamer b. Secretary of Defense Streamer c. Chief of Staff, AFP Streamer d. Commanding General, PA Streamer 5. Other Forms of Award a. Letter and Plaques – Commendation, Appreciation, Major Service Commander’s Plaque. b. Certificates – Special, Honorable Service, Peace and Order Campaign Certificate and Certificate of Merit. c. Trophies – CSAFP’s, Major Service Commander’s and Staff Trophies. 2.4.2.2 Wearing of Miniature Medals Wearing of miniature medals on civilian clothes shall be limited to ceremonial occasions only. Miniature medals may be worn on mess jacket, Barong Filipino and evening clothes and shall be one-fourth (1/4) of the actual size of the prescribed medals and ribbons. 2.4.2.3 Wearing of Large Medals Medals may be worn on the formal attire or the service uniform, but will not be worn on the uniform together with their corresponding ribbons. 1. These decorations, however, may be worn on uniforms during occasions as follows: a. On state occasions, local or abroad. b. When receiving or calling or acting as escort or aide to the President of the Republic of the Philippines. c. In all official and social functions in Malacañang Palace, when attending other ceremonies and social functions elsewhere given for Secretaries of different departments or ranking officers of the AFP and other friendly foreign countries.

R E S T R I C T E D

R E S T R I C T E D

113

2. Commanding Officers may prescribe the wearing of large medals on the following occasions: a. Parades, reviews, inspections. b. Ceremonial and social occasions. c. Regular duty when the general office uniform is worn. d. Funerals. 3. These decorations may also be worn at the option of the wearer on the above occasions unless not prescribed and prohibited on the following occasions: a. Holiday, when not on duty with troops. b. Social occasions of a private nature. 4. Conversely, these decorations shall not be worn on the following occasions: a. On service shirt, overcoat as when equipped for combat or simulated combat. b. By officers while suspended from command or rank or facing court martial or efficiency separation board. c. By enlisted personnel while serving sentence of confinement. d. When wearing civilian clothing, except for civilian decorations. 2.5 INDIVIDUAL CLOTHING AND EQUIPMENT 1. To be prepared for deployment in the combat area requires that individual soldier must possess the required combat clothing and equipment. The individual clothing and equipment issued to individual military personnel cost the government sum of money, hence it is the obligation of every soldier to keep his clothing and equipment properly cared and maintained to its serviceability. The manner by which a soldier cares and maintains his issued clothing and equipment reflects on his state of discipline and dedication to his duties.

R E S T R I C T E D

R E S T R I C T E D

114

2. Troops undergoing training are regularly required to display

their uniform and equipment either in field inspection or in their locker in a neat and orderly manner. Clothing and equipment inspection may also be conducted to ensure that our soldiers maintain their prescribed clothing and equipment and such are properly given necessary care. 2.6 UNIFORM FOR PHILIPPINE ARMY RESERVIST AND ROTC CADETS 2.6.1 Designated Uniforms for Reservist 1. Battle Dress Uniform a. Battle Dress Uniform (BDU) for Reserve Force is the same as the BDU used by the Regular Force. b. The headgear shall be the same as that used by the officers and enlisted personnel of the Regular Force, which is Green Beret and Camouflage and Lousy cap. c. A reservist seal with rank insignia is attached on the left front portion of the beret for officers and plain Army reservist seal for enlisted reservist. d. The reserve unit seal shall be attached on the center of the left breast pocket. e. The RCDG seal shall be attached on the center of the right breast pocket. f. Army seal is sewn on the right shoulder sleeve 2.5 cm from the shoulder seam. g. ARESCOM seal on the left shoulder sleeve. 2. General Office Uniform (GOU) a. GOU Uniform will be the same as that of the uniform worn by the regular troops. b. The reservist seal (metal) shall be pinned on the center of the right pocket.

R E S T R I C T E D

R E S T R I C T E D

115

c. The reserve unit seal shall be pinned on the center of the left pocket. d. The shoulder loop for officer reservist shall be the same as that used by the regular force officers. e. The rank insignia for all grades shall be silver in color. f. Use of headgear shall be the same as that of the regular force officers. 2.6.2 Uniforms for ROTC Cadets 1. Type A – Cotton twill fatigue coat and trousers. a. Headgear – Ball Cap fatigue w/ ARESCOM seal for male and Oversea Cap for female. b. Trouser design without side pocket (tucked-in). c. School insignia at the left center pocket. d. RCDG patch at left shoulder sleeve. e. ARESCOM patch at the right shoulder sleeve. f. Garrison, belt with PA seal. g. Footwear – combat boots, field use. 2. Type B – White T-shirt (round neck)/fatigue trouser. a. Headgear – ball cap, fatigue with ARESCOM seal for male and oversea cap for female cadet. b. School insignia printed at the left breast. c. Trouser design without side pocket (tuck-in). d. Surname in black printed at the back of the shirt. e. Footwear - combat boots, field use.

R E S T R I C T E D

R E S T R I C T E D

116

2.6.3 Items on Uniform 2.6.3.1 Battle Dress Uniform (BDU) 1. Unit Seal – place on the left breast pocket indicating therein what unit he/she belongs (Ex: 1301st RRBn). 2. RCDG seal (Cloth) – place at the right breast pocket. 3. Headgear a. Green Beret shall be the same with Army reservist seal and black rank insignia for officers. Plain Army reservist seal for enlisted personnel. b. Lousy, Hat Camouflage 4. Philippine Army Seal at the right shoulder sleeve. 5. ARESCOM Seal on the left shoulder sleeve. 6. Embroidered black rank insignia for officers and enlisted reservist on both collars. 7. Pistol Web Belt. 2.6.3.2 General Office Uniform (GOU) 1. Headgear a. Oversea Cap with Army Reservist Seal (metal) for officers and plain for reservist enlisted personnel. b. Green Beret with Army reservist seal (cloth) with black metal rank insignia for officers and Army reservist seal plain for enlisted reservist. 2. Shoulder loop – same with the Regular Force for officers.

R E S T R I C T E D

R E S T R I C T E D

117

3. Chevrons (maroon) for enlisted reservist.

4. Garrison belt, green with buckle.

2.6.4 Occasions for Wear 2.6.4.1 Battle Dress Uniform (BDU) 1. During mobilization of reservist. 2. Annual Active Duty Training (AADT). 3. Other occasions as directed or prescribed by CG/CO ARESCOM. 2.6.4.2 General Office Uniform (GOU) – During occasions similar to regular force and as prescribed by commanders. 2.7 CARE AND MARKINGS OF THE UNIFORM The Army marking systems is a prescribed uniform system of permanent markings for military supplies and equipments. The markings prescribed are intended to provide a convenient means, consistent with security, of identifying military property. All government property will be marked according to prescribed method as discussed in this AFP Uniform Code. 2.7.1 Storing 1. Uniforms must be hanged in a clothes hanger and stored in a closet/locker as protection from dust and dirt. 2. Clean and neatly folded uniforms must be kept in a closet/locker. 2.7.2 Washing/Laundering 1. Regular washing/laundering is required of the uniform to keep it free from stain, dirt and foul smell. 2. Hand or machine wash can be made, provided that all soap is thoroughly rinsed out. Uniforms like White Duck can be laundered preferably thru steam wash/dry clean.

R E S T R I C T E D

R E S T R I C T E D

118

3. Avoid too much exposure to sunlight when drying. 4. Philippine Army uniforms must not be starched/bleached. 2.7.3 Ironing Ironing of uniform is necessary to press and straighten out its wrinkled part to make the uniform smart crisp and presentable. Uniforms like White Duck and other formal uniforms must be ironed-out preferably thru steam press. 2.7.4 Markings 1. A marking of the uniforms is necessary to prevent losses or unintentional use by other personnel. Normally, markings are made on the inner side of the uniforms such that t-shirt’s marks are made under the lowest inner portion while that of the pants are made on the inner waist part. 2. Markings should be placed so as to make it hidden when normally worn. The markings should follow this form: LAST NAME AND INITIALS: STO DOMINGO EB Rank COL 3. Methods of Marking – should be done with black ink waterproof marking. 4. The size of letters and numerals should be suitable to the available space, but should not exceed 3.0 cm in height, nor on the other hand be so small as not to be readily distinguishable. 5. Textile of dark color such as olive drab (OD) should be marked in white; those of a light color should be marked in black. 2.8 RESTRICTIONS WHEN ON UNIFORM The wearing of Army Uniforms is prohibited on the following events or occasions: 1. In connection with the furtherance of any political or commercial interest or when engaged in off-duty civilian employment.

R E S T R I C T E D

R E S T R I C T E D

119

2. When participating in public speeches, interviews, picket lines, marches, rallies, or public demonstrations, except as authorized by competent authority. 3. When attending any meeting or event, which is a function of, or is sponsored by an extremist organization. 4. When wearing the uniform, smoking while walking, which would bring discredit upon the Army. 2.9 POLICIES ON ARMY UNIFORMS 1. Only uniforms, accessories and insignia prescribed shall be worn by personnel in the Army, unless prescribed in this Code, wear policies for organizational clothing and equipment. No item governed by this Code shall be altered in any way that changes the basic design as prescribed in specification. 2. No person unless otherwise authorized by law, except a member of the Army, may wear the uniform or a distinctive part of the uniform of the Army; or a uniform of any part of which is similar to a distinctive part of the uniform of the Army with or on civilian clothes. 3. The Army is a uniformed service where discipline is judged, in part, by the manner in which the individual wears the uniform as prescribed. Therefore, a neat and well-groomed appearance by soldiers is fundamental to the Army and contributes to building the pride and spirit essential to an effective military force. A vital ingredient of the Army’s strength and military effectiveness is the pride and self-discipline that Army soldiers bring to their service. It is the responsibility of commanders to ensure that military personnel under their command present a neat and soldierly appearance. It is the duty of all soldiers to take pride in their appearance at all times. 4. All personnel shall maintain a high standard of dress and appearance. Uniforms shall be properly fitted (trousers or pants and skirts should not be tight), clean, serviceable and dressed as necessary. Personnel must project a military image that leaves no doubt that they live by a common military standard and are responsible to military order and discipline. 5. Personnel shall ensure that when articles are carried in pocket; i.e., wallets, combs and keys, these articles do not protrude from the pocket or present a bulky appearance. Items such as keys, key chains and cell phones shall not be attached to belt loops, or belts unless; i.e., in charge of quarters or armor while in uniform.

R E S T R I C T E D

R E S T R I C T E D

120

6. Personnel shall not place their hands in their pockets except momentarily to place or retrieve objects. 7. Uniforms shall be kept buttoned, zipped and snapped; metallic devices such as metal insignia, belt buckles, and belt tips shall be kept in proper luster and free of scratches, and corrosion; medals and ribbons shall be clean and not frayed; and shoes and boots shall be cleaned and shined. The insignia shall be replaced when it becomes unserviceable or no longer conforms to standard.

R E S T R I C T E D

R E S T R I C T E D

121

CHAPTER 3

NAVY UNIFORM

“Wearing of the naval uniform shall be a matter of personal pride to all Philippine Navy personnel. The manner by which the Navy uniform is worn is a reflection of the state of discipline, morale and efficiency of the Philippine Navy” 3.1 GENERAL GUIDELINES 1. Wearing of the naval uniform shall be a matter of personal pride to all Philippine Navy personnel. All officers and enlisted men shall provide themselves with the correct uniform as prescribed by these regulations and are forbidden to wear any other than the regulation uniforms, insignia, and devices of their respective rank or rating. The uniform promotes a feeling of unity while adding smartness to the appearance of an individual or group. Furthermore, the uniform makes it possible to distinguish readily between seniors and juniors, thus facilitating the rendition of correct recognition. Insignias worn according to regulations upon the uniform indicate the rank, rate and specialty as well as other distinguishing features, such as awards, campaign ribbons and service stripes. 2. It shall be the duty of those entrusted with authority to enforce the provisions of these regulations. Violations of provisions in this Code shall be reported to concerned Commanders/authorities through MP Delinquency Report for appropriate corrective measures and disciplinary actions.

R E S T R I C T E D

R E S T R I C T E D

122

3. The uniform with its

various insignia and devices is designed primarily to indicate on sight those belonging to the naval service; to show at a glance their rank or rating. And hence, the authority and responsibility imposed by law rest upon those wearing the uniform.

4. Uniform shall be kept scrupulously clean, with laces, devices and insignia bright and free from tarnish and corrosion. 5. The Blue when specified to designate the color of a material for a garment shall be interpreted to mean Navy blue, which has a shade of blue-black in the international color chart. 6. All types of female uniforms shall be of the prescribed standard female design prescribed in this Code. 3.1.1 Purpose The Philippine Navy Uniform with its various insignia and devices stands for the Philippine Navy as one organization. The manner by which the Navy uniform is worn is a reflection of the state of discipline, morale and efficiency of the Philippine Navy. Like in any other organization, the navy uniform is worn with dignity and pride. Consequently, it is the duty of the navy personnel not to allow any one to degrade the uniform and what it stands for.

3.1.1.1 Philippine Navy Uniform Board Composition

Naval Adjutant Chairman Assistant N4 Vice Chairman Representative, ONA, HPN & HSG Member Assistant, TNPM Member Adjutant, PMC Member Adjutant, NISF Member Adjutant, NLC Member Adjutant, NRC Member Adjutant, NCBde Member Representatives (OESPA) Member Adjutant, PHILFLT Member Adjutant, NSSC Member Adjutant, NETC Member

R E S T R I C T E D

R E S T R I C T E D

123

PN Sgt Majors (O/CMCPO) Member Admin Officer (O/NA) Member/Secretary

3.1.2 Officers Off Duty – Officers on official leave, pass or liberty may not wear uniform if they choose during such off-duty periods. However, should they call at a military unit for certain official purposes, it is preferred that the uniform be worn, notwithstanding his off-duty status. Officers in charge of units engaged in intelligence work shall supplement this paragraph in order to regulate the wearing of civilian clothing by personnel under them. 3.1.3 Probationary Officers – Probationary Ensigns so appointed and called to active duty as such in the Philippine Navy are authorized to wear the uniforms prescribed for a commissioned ensign. When detailed to a Philippine Navy training school as student officers, these probationary officers may be required by the school superintendent to wear other items of uniform that will properly distinguish them as student officers. The school superintendent shall supplement this paragraph with appropriate uniform instructions for student personnel under him. 3.1.4 Civilian Clothing, Officers – Officers maybe permitted to wear civilian clothing when off duty. No part of the prescribed uniform or equipment shall be worn at the same time that civilian clothing are worn, except articles which do not present a distinct naval appearance, such as raincoats, underclothing socks and shoes. 3.1.5 Retired and Reserve Officers – Retired and reserve officers (inactive) may wear the prescribed uniform on the following occasions: 1. Military ceremonies. 2. Formal gatherings of military character. 3. When engaged in the military instruction of cadet corps, school teachers or similar organizations. 4. When responsible for the military discipline at an educational institution. 5. As instructors in the Citizens’ Military Training (CMT) in high schools during the period they are actually holding classes or conducting military instruction; and 6. When visiting a military camp, post or station, including commercial vessels for the purpose of participating in military drills or exercises or when assembled thereat for purposes of instruction.

R E S T R I C T E D

R E S T R I C T E D

124

3.1.6 Civilian Clothing, Enlisted Men 1. Enlisted men shall not be allowed to wear civilian clothing on board PN ships or inside PN shore installations, except as provided below: a. When they are staying in enlisted housing areas and are off duty. b. When attending social activities of their club and they are off duty. c. When actually engaged in intelligence work and are authorized by their officer-in-charge to wear civilian clothes. 2. Enlisted belonging to units in the field or ships on operation shall be in uniform at all times. 3. No part of the uniform shall be worn with civilian clothing, except articles that do not present a distinct naval appearance. 3.1.7 Uniform of the Day 1. The uniform to be worn for the season, day or occasion shall be prescribed by the senior officer present with due regard to the duty to be performed and the state and variation of the weather. 2. The uniform of the day shall be regulated by the senior officer present to insure that the dress for officers and men are the same for all in the same locality. The senior officer present afloat shall inquire of the station commander or senior officer present ashore what uniform is being prescribed, in order to preserve the desired uniformity for liberty and groups. 3. When afloat, the uniform of the day prescribed by the senior officer present shall be worn by officers of the watch; by all petty officers, signalmen, and other details on watch above deck and by boat crew (while at anchor); by all hands when going in or out of port; and generally by all officers and men above deck and in common living spaces; but commanding officers may prescribe or permit the working uniform for other hands as may be most suitable to the exercise of duty aboard at the time. 4. When embarked on transports, those of the naval service shall wear the uniform prescribed by the senior naval line officer embarked.

R E S T R I C T E D

R E S T R I C T E D

125

5. Prescribed uniform shall be designated in numerical codes as provided for in this Code. 6. When white uniform or uniforms, any part or parts of which are white, are designated, they shall be so prescribed that officers and men of all branches shall be similarly clothed as far as practicable. 3.1.8 Officer of the Deck The Officer of the Deck (OOD) in port shall wear prescribed uniform and carry appropriate side arms as prescribed by competent authority. When at sea, he shall carry binoculars. 3.1.9 Pistol as Sidearm When the pistol is carried, the belt shall be worn outside of every coat, including the overcoat, the pistol being worn slightly in front of the right hip. The cartridge pouch shall be worn at the left of the buckle.

3.1.10 Pins and Jewelry

No watch or fob chains, pins or other form of jewelry shall be worn exposed upon the uniform by any officer or enlisted man except regulation cravat clasp, name plate, sleeve buttons and shirt studs when prescribed, and the authorized decorations, medals and ribbons.

3.1.11 Hair, Beard and Mustache

The hair, beard and mustache shall be neatly trimmed. The face shall be kept clean-shaven except that the beard or mustache may be worn for health reasons and as authorized by medical doctors. No eccentricities in the manner of wearing them shall be permitted. 3.1.12 Inspection of Clothing 1. Commanding officers shall cause their men’s clothing and bedding to be inspected by the Staff officers periodically. They shall encourage their men to keep their uniforms clean and neat, and do everything possible to facilitate the proper care, cleaning, fitting and preservation of the uniform and equipment. 2. Division officers shall inspect the clothing and bedding of the men in their respective divisions to insure that they have the prescribed outfit at all times. They shall make inspections regularly to determine that these are clean, properly marked and strictly in accordance with existing regulations.

R E S T R I C T E D

R E S T R I C T E D

126

3.1.13 Marine Personnel Serving with Naval Forces The senior officer present shall prescribe the uniform worn by officers and men of the Marines when serving afloat or ashore under naval command. 3.1.14 Regulation Clothing Clothes made by the men for themselves, made by the post or ship’s tailors for them or received in material, shall be patterned and made with those issued by the government. 3.1.15 Transfer or Exchange of Clothing No transfer and/or exchange of clothing shall be made without the authority of the Commanding Officer. When these are authorized, the Commanding Officer shall require the old markings to be obliterated with a stamp marked “VOID” and the new owner’s marks to be placed above or below it as soon as possible. 3.1.16 Standard Phraseology When official references are made to the uniform by any person in the Navy, or the Marine Corps, by any office or in any official publication, the terms set forth in these Regulations shall be used. 3.1.17 Medals, Ribbons and other Decorations will be worn in the manner prescribed by AFPRG 131-053 as follows: 1. Decorations and service medals are not worn in uniforms together with their corresponding ribbons. Decorations and service medals will not be worn on the service shirt, overcoat, or when equipped for the field. Officers suspended from rank or from command or enlisted personnel serving sentence of confinement are prohibited from wearing decorations, medals or substitutes thereof. 2. Decorations and service medals and badges will be worn when in uniform on the following occasions, unless specifically prescribed otherwise: a. On state occasions at home and abroad. b. When receiving or calling or acting as escort or aide to the President of the Republic of the Philippines.

R E S T R I C T E D

R E S T R I C T E D

127

c. At all official and social functions elsewhere; other ceremonies and social functions, given by or for members of the Cabinet or by ranking officers of the Armed Forces. d. As escort of the color. 3. Decorations and service medals may be prescribed by the commanding officers for wear on the following occasions: a. On ceremonial and social occasions of a general or formal nature. b. For parades, reviews, inspections and funerals. 4. Decorations and service medals may be worn at the option of the wearer on social occasions of a private nature, and on holidays when not on duty with troops under arms. 5. On mess jacket and on evening clothes, miniatures may be worn. 6. Authorized badges not to exceed three in number may be worn on the service uniform, but not on the mess jacket nor on civilian clothes. Badges of societies will not be worn with decorations, service medals, or substitutes. 7. Decorations and service medals or ribbons are worn on the uniform above the left breast pocket in rows of three. Line of medals is about 10 cm below the middle point of the top of the shoulder. The highest award should be to the right in the upper row, the lowest in the lower row to the wearer’s left. All ribbons that are multi-colored should be worn such that the blue colors are placed towards the wearer’s right. Decoration and service medals or ribbons when worn will be in the following order of precedence: a. Individual decorations of the Armed Forces of the Philippines in the order of precedence b. Individual decorations of the United States Army in the order of precedence c. Long Service Medals d. Philippine Constabulary Campaign in the order earned. e. World War I Victory Medal f. Philippine Defense Ribbon g. Philippine Liberation Ribbon h. American Defense Ribbon i. Asiatic Pacific Ribbon

R E S T R I C T E D

R E S T R I C T E D

128

j. World War II Victory Ribbon. k. Philippine Independence Ribbon. l. Korean Campaign Ribbon. m. Anti-Dissidence Campaign Ribbon. 8. The precedence among the decorations of the Armed Forces of the Philippines and relative equivalence between decorations of the United States Army are as follows: Armed Forces of the Philippines: a. Medal of Valor b. Distinguished Conduct Star c. Distinguished Service Star d. Gold Cross e. Philippine Legion of Honor f. Distinguished Aviation Cross g. Bronze Cross h. Military Merit Medal i. Silver Wing Medal j. Military Commendation Medal

k. Wounded Personnel Medal US Armed Forces: a. Medal of Honor b. Distinguished Service Cross or Navy Cross c. Distinguished Service Medal d. Silver Star e. Legion of Merit f. Distinguished Flying Cross g. Soldier’s Medal or Navy Marine Corps Medal h. Bronze Star Medal i. Air Medal j. Commendation Ribbon k. Purple Heart 3.1.18 Authorized Non-Military Items on Uniform 1. Sunglasses may be worn while in uniform when driving, traveling or in an open area but not during ceremonies like parades, morning colors, etc. Eyeglasses maybe worn only when prescribed by a doctor. 2. No pens, cellular phones, keys and other unauthorized paraphernalia should be attached or displayed visibly on any uniform.

R E S T R I C T E D

R E S T R I C T E D

129

3. Unauthorized patches or unit emblem should not be sewn as specified in the uniform particularly camouflage uniform. 3.1.19 Personal Appearance and Grooming 1. Haircut must be proper and trimmed without unduly obstructing the headgear. a. Male: Keep hair neat, clean and well groomed. Hairstyle properly groomed shall not be greater than approximately 2.54 cm in bulk. Bulk is a distance that the mass of hair protrudes from the scalp. No individual hair will measure more than 2.54 cm in length. The maximum tolerable haircut is measured about 5 cm from the top of the ears and 10 cm based on the lower natural hairline. Colored hair dyes except black are not authorized. b. Female: Haircut and style shall present a balance appearance. Lopsided and extremely asymmetrical styles widely spaced individual hanging locks and braids, which protrude from the head, are not authorized. Appropriateness of a hairstyle shall also be judged by its authorized appearance when headgear is worn. 2. Every Philippine Navy personnel must maintain a clean and shaven face at all time in uniform. Mustache and beard are not authorized except by medical reason. 3. Proper ironing of uniform must be the standard preparation of all types of uniform. Khaki green shirt must have three (3) equally distributed ironed folds at the back and two (2) evenly distributed ironed folds in front, which are, aligned with the breast pocket buttons. No folds should appear in the breast pockets. Likewise, trousers should be properly ironed along its folds and must be worn without the horizontal folds due to packing or storage in cabinets/lockers. 4. T-shirt with printed advertisement of commercial products other than military in nature is strictly prohibited. Henceforth, only regulation white round-neck T-shirts shall be the only authorized shirts to be worn when in uniform. 5. All military must at all times be in complete uniform and with headgear when outdoors or moving around in open space. In no case shall military personnel be moving outdoor in half uniform. 6. Wearing mixed civilian military uniform when outdoor or moving around inside camp regardless whether on board a military vehicle is strictly prohibited.

R E S T R I C T E D

R E S T R I C T E D

130

3.2 OFFICIAL AND AUTHORIZED UNIFORMS 3.2.1 Officers Formal Dress Uniform 3.2.1.1 Evening Dress Uniform (Mess Jacket, Blue) 1. Description/Specification: Black Dress Jacket, a short body coat, with notched lapels, wearing slightly over the hips, back tapered to a point, inside bosom pocket, braided closing matching high waist trouser with side seam pockets, hook and eye closing, straight leg styling white formal wing collar. Worn over white long sleeved shirt with pleated or ruffled front and black round buttons, black pre-tied butterfly bow tie. The coat is worn open, but held together in front by two lined buttons. The trouser is a standard black tuxedo cloth, close fitting around the buttocks, bottom is without cuffs, no side or hip pockets, with black piping 2 cm silk lace centered on outer seams of the trousers. The female skirt is of the same color and material as that of the male trouser, ankle length, pencil cut with no flare from hip to seam, overlapping back slit 38 to 46 cm. Black piping 2 cm sewn on the outer seams of the skirt. 2. Material Used: 100% wool (Tropical WT), blend of 55% polyester / 45% wool (Tropical WT), 100% wool gabardine, blend of 55% polyester / 45% wool gabardine. 3. Accoutrements/Accessories: Four large and two small gold tone AFP buttons, miniature medals, shoulder boards, cummerbund (12.7 cm wide waist band in black satin). 4. Headgear: White Pershing Cap, all leather cap frame, vinyl covered visor, gold tone buttons. White felt cap for female officers. (Chins strap cap cover and cap insignia additional)

5. Footwear Service Dress Shoes – black leather oxford with plain toe, rubber soles and heels (government issue). Uniform socks cotton hose with nylon-reinforced heel and toes (black).

R E S T R I C T E D

R E S T R I C T E D

131

3.2.1.2 Dress White 1. Description/Specification: Singled-breasted jacket, choker, collar hook and eye closing, patch/slap button pockets, matching trousers with seam pockets. Straight leg cut styling. 2. Materials Used: 65% polyester/35% cotton blend 100% gabardine. 3. Accoutrements/Accessories: Shoulder Board of corresponding rank, AFP decorations and service ribbons, nameplate and various authorized insignias, gold tone buttons. Navy sword and gloves during parades or occasions as prescribed. Marines: Marine insignia type III, metal rank insignia, solid brass AFP buttons, nameplate, ribbons and badges. 4. Headgear: White Pershing cap, all-leather cap frame, vinyl covered visor and gold tone buttons (chin strap, cap cover and cap insignia additional). White felt cap for female. 5. Footwear: Dress shoes, white oxford with rubber sole and nylon reinforced heels and toes, dull finish. Uniform dress sock is white. Marines: Dress shoes, black oxford, black socks. 3.2.2 Officers Semi-Formal Dress Uniform 3.2.2.1 Dress Blue 1. Description/Specification: Double breasted jacket with notched collar, double row of three gilt buttons down each forepart welt pockets, semi-fitting, seam back, no vent, reaching 2.5 cm below crotch line, matching trouser with side seam pocket and two back pockets, hook-eye closing, straight leg styling over a white long-sleeved shirt with straight collar.

R E S T R I C T E D

R E S T R I C T E D

132

2. Materials Used: 100% wool (Tropical WT), blend of 55% polyester/45% wool (Tropical WT), 100% wool gabardine, or blend of 55% polyester 45% wool gabardine. 3. Accoutrements/Accessories: Gold tone large buttons, sleeve rank insignia with Philippine sun, nameplate, AFP decorations and service ribbons, various AFP authorized insignias and black necktie. 4. Headgear: White Pershing cap, all leather cap-frame, vinyl covered visor and gold tone buttons (chin strap, cap cover insignia additional). White felt cap for female. 5. Footwear: Service Dress Shoes – black leather oxford with plain toe, rubber soles and heels (government issue). Uniform socks cotton hose with nylon-reinforced heel and toes (black). Pump shoes for female. 3.2.2.2 Undress White 1. Description/Specification: White shirt with short sleeves, button front, patch/flap button pockets. Matching trousers with side seam pockets, two back pockets, hook and eye closing, straight styling. 2. Materials Used: 100% wool (Tropical WT), blend of 55% polyester/45% wool gabardine. 3. Accoutrements/Accessories: Shoulder board of corresponding rank, nameplate, AFP decorations and service ribbons, white belt with silver buckle.

R E S T R I C T E D

R E S T R I C T E D

133

4. Headgear: White Pershing cap, all leather cap frame, vinyl covered visor and gold tone buttons (chip strap, cap cover, and insignia additional). White felt cap for female. 5. Footwear: Dress shoes, white oxford, with rubber sole and heels, dull finish. Uniform dress sock is white. Pump shoes for female. 3.2.3 Officers Functional Dress Uniform 3.2.3.1 Service Khaki (Working Khaki) 1. Description/Specification: Khaki shirt with short sleeves, conventional cut, button front and patch/flat button pockets with matching khaki trousers with side seam pockets and straight leg styling.

2. Materials Used: 100% wool (Tropical WT), blend of 55% polyester/45% wool gabardine. 3. Accoutrements/Accessories: Nylon brown web belt with silver buckle, nameplate, various AFP authorized ribbons and insignias (optional).

Officers’ Shirt Front

Officers’ Shirt, Back

Officers’ Shirt, Service Khaki

R E S T R I C T E D

R E S T R I C T E D

134

4. Headgear: Khaki Oversea / Garrison Cap (for male and female) as the standard headgear. Khaki Pershing Cap all leather cap-frame, vinyl covered visor and gold tone buttons (chin strap, cap cover insignia additional); or Ball cap. 5. Footwear: Service Dress Shoes – black leather oxford with plain toe, rubber soles and heels (government issue) or safety shoes when aboard ship. Uniform socks-cotton hose with nylon reinforced heel and toes, (black). Pump shoes for female. 6. Occasions: Used as General Office Uniform or as prescribed by the Commander. 3.2.3.2 Battle Dress Uniform (Camouflage) Same as that of the camouflage uniform of the Marine Corps without the Marine patches. The headgear shall also be the standard Marine HBT or utility camouflage cap but without the front Marine Emblem.

3.2.3.3 Blue Coverall

1. Description/Specifications: Dark blue male coveralls. Long sleeved, unrolled or rolled up. Two back pockets below elastic waistband worn with undershirt.

2. Materials Used: Fire retardant of 65% polyester fiber, 35% cotton. 3. Accoutrements/Accessories: Embroidered rank insignia on collar. Qualifying parch atop left breast pocket and name cloth atop right breast pocket.

R E S T R I C T E D

R E S T R I C T E D

135

4. Headgear: Black ball cap. 5. Footwear: Black service dress shoes or safety shoes, black socks. 3.2.3.4 Athletic Uniform 1. Description/specification, materials used, accoutrements/accessories: As prescribed by Commanding Officer. 2. Headgear: Maybe prescribed by Commanding Officer, usually ball cap. 3. Footwear: Dominant white rubber shoes and white socks.

3.2.4 ENLISTED Dress Uniform (E-7 To E-9) 3.2.4.1 Dress White 1. Description/Specifications: Single-breasted jacket, choker, collar hook and eye closing, patch/flap button pockets, matching trousers with seam pockets, straight leg cut styling.

2. Materials Used: Blend of 65% polyester and 35% cotton, 100% gabardine. 3. Accoutrements/Accessories: Shoulder board of corresponding rating, AFP decorations and service ribbons, nameplate, authorized insignia, gold tone buttons. 4. Headgear: White Pershing cap, all leather cap frame, vinyl-covered visor, CPO insignia. White felt cap for female personnel.

R E S T R I C T E D

R E S T R I C T E D

136

5. Footwear: Black leather service shoes. Pump shoes for female personnel. 3.2.4.2 Dress Blue 1. Description/Specification: Same as for Officers Dress Blue. 2. Materials Used: Blend of 65% polyester and 35% cotton, 100% gabardine. 3. Accoutrements/Accessories: Shoulder board of corresponding rating, AFP decorations and service ribbons, nameplate, authorized insignia, gold tone buttons. The color is per Navy regulations blue. 4. Headgear: White Pershing cap, all leather cap frame, vinyl-covered visor, CPO insignia. White felt cap for female personnel. 5. Footwear: Black leather service shoes. Pump shoes for female.

3.2.4.3 Undress White (Summer White) 1. Description/Specifications: Shirt with short sleeves, button front and patch/flap button pockets with matching white trousers, with side seam pockets, straight leg styling for CPO’s, bell bottom cut for other EP, shoulder board with corresponding rating for CPO. 2. Materials Used: Gabardine for CPO and ramie for other EP.

R E S T R I C T E D

R E S T R I C T E D

137

3. Accoutrements/Accessories: Nylon white web belt with silver buckle, nameplate, rating badge, (ribbons optional). 4. Headgear: White Pershing cap with CPO insignia and black thin strap for CPO. White felt cap for female. 5. Footwear: Dress shoes-black leather oxford with plain toe, rubber soles and heels (government issue). Uniform socks-cotton hose with nylon reinforced heel and toes (black). Pump shoes for female. 3.2.4.4 Service Khaki (Working Khaki) 1. Description/Specification: Tucked in khaki shirt with short sleeves, patch/flap button pockets with matching khaki trousers with side seam pockets and straight leg styling. Khaki shirts and skirts for female shall be of standard female design. 2. Materials used: Blend of 55% polyester and 45% gabardine. 3. Accoutrements/Accessories: Nylon khaki web belt with silver buckle, nameplate, authorized AFP ribbons, and insignia (optional).

4. Headgear: Khaki Oversea / Garrison cap. 5. Footwear: Black leather service shoes or safety shoes. Pump shoes for female.

R E S T R I C T E D

R E S T R I C T E D

138

3.2.4.5 Blue Coverall

1. Description/Specifications: Dark blue male coveralls. long sleeved, unrolled or rolled up. Two back pockets below elastic waistband worn with white round neck undershirt. 2. Materials Used: Fire retardant of 65% polyester fiber, 35% cotton. 3. Accoutrement/Accessories: Embroidered rank insignia on collar. Qualifying parch atop left breast pocket and name cloth atop right breast pocket. 4. Headgear: Black ball cap. 5. Footwear: Black service dress shoes or safety shoes, black socks. 3.2.4.6 Athletic Uniform 1. Description/specification, materials used, and accoutrements/accessories: As prescribed by Commander. 2. Headgear: As specified or prescribed by Commander. 3. Footwear: Dominant white rubber shoes and white socks.

R E S T R I C T E D

R E S T R I C T E D

139

3.2.5 Enlisted Dress Uniform (E-1 To E-6)

3.2.5.1 Service Dress White Jumper (White Alpha) 1. Description/Specification: Straight jumper with square collar and hemmed sleeves. Welt breast pockets. Finished hem, matching trousers with inside pockets and inverted side creases, bell-bottom leg styling. 2. Material Used: 100% Wool. Blend of 55% polyester and 45% wool. 3. Accoutrements/Accessories: Ribbons, neckerchief and rating badge, nameplate, nylon white belt with silver buckle. 4. Headgear: Enlisted man’s service hat (white hat). 5. Footwear: Dress Shoe – black leather oxford with plain toe, rubber soles and heels (government issue). Uniform socks-cotton hose with nylon reinforced heel and toes (black). Pump shoes for female. 3.2.5.2 Service Dress Blue Jumper 1. Description/Specification: Same as for White Jumper. 2. Materials Used: Same as for White Jumper. 3. Accoutrements/Accessories: Same as for White Jumper except that the color is per Navy Regulation blue. 4. Headgear: Same as for White Jumper. 5. Footwear: Same as for White Jumper.

R E S T R I C T E D

R E S T R I C T E D

140

3.2.5.3 Undress White (Summer White) 1. Description/Specifications: Shirt with short sleeves, button front and patch/flap button pockets with matching white trousers, with side seam pockets, bell-bottom cut. White shirts and skirts for female shall be of standard female design. 2. Materials Used: Ramie fabric. 3. Accoutrements/Accessories Nylon white web belt with silver buckle, nameplate, rating badge, (ribbons optional). 4. Headgear: Service hat (white hat). 5. Footwear: Dress shoes-black leather oxford with plain toe, rubber soles and heels (government issue). Uniform socks-cotton hose with nylon reinforced heel and toes, (black). 3.2.5.4 Dungaree Pants/ Chambray Shirts 1. Description/Specification: Blue denims with patch front pockets, two back pockets inverted side creases. Chambray shirt with long or short sleeves, button front, patch/flap button pockets. Dungaree skirts and Chambray shirts for female shall be of standard female design. 2. Materials Used: Ramie fabric. 3. Accoutrements/Accessories: Nameplate, rating badge.

R E S T R I C T E D

R E S T R I C T E D

141

4. Headgear: Service hat (white cap). 5. Footwear: Dress shoes, black leather. Pump shoes for female. 3.2.5.5 Blue Coverall 1. Description/Specifications: Dark blue coveralls. Long sleeved, unrolled or rolled up. Two back pockets below elastic waistband, worn with white round neck undershirt. 2. Materials Used: Fire retardant of 65% polyester fiber, 35% cotton. 3. Accoutrements/Accessories: Embroidered rank insignia on collar. Qualifying parch atop left breast pocket and name cloth atop right breast pocket. 4. Headgear: Black ball cap. 5. Footwear: Black service dress shoes or safety shoes, black socks. 3.2.5.6 Athletic Uniform 1. Description/specification, materials used, and accoutrements/accessories: As prescribed by Commanders. 2. Headgear: As prescribed by Commanders, usually ball cap.

R E S T R I C T E D

R E S T R I C T E D

142

3. Footwear: Dominant white rubber shoes and white socks.

3.2.6 PN Distinctive Service General Office Uniform (GOU) for Female Line Personnel

3.2.6.1 Female Officers and CPOs

1. Description: It is a two-piece ensemble consisting of the khaki blouse and skirt, the same material and fabric as that of their male counterparts. a. Skirt: Semi-pencil cut, one-piece front with slide fastener closure at the back and two (2) secret pockets on both sides. It is knee length with overlapping closed slit 15.24 cm from the hemline.

b. Blouse: Single breasted without shoulder straps, semi formfitting, tailored, closed with five (5) small buttons in French button holes which are equally spaced with last button below the waistline, tucks on each side, the length of the blouse shall not be less than 15.24 cm and not more than 20.32 cm from the waistline. The fold of the seam is 3.8 cm wide. The back has straight horizontal cut with two (2) vertical tucks on each side. Collar and lapels shall be flat, semi-rounded collar lapel type with pointed corners. Collars are 7cm wide, tapering 5.7 cm wide. Sleeves are short and the length is approximately 5 cm from the inside of the forearm

Front Back Left Side

Skirt, Female

R E S T R I C T E D

R E S T R I C T E D

143

when bent with 5 cm overlap from the end. Skirt is straight cut, knee-length and fits snugly around the waist and hips. Metal rank insignia is use on the collar as on the male khaki shirt.

c. Trousers The design shall be the same as that of the Technical Service.

2. Materials Used: a. Shirt – Khaki woven fabric. b. Trousers – Same as the khaki shirt.

3. Accouterments/Accessories: a. Collar Ornament – collar insignia shall be worn.

b. Nameplate.

c. Rank Insignia – worn on both sides of the collar. d. Cap, hosiery and shoes – Oversea Cap equivalent of male officers, nylon hose. e. Hand Bag – Black, plain design of the calfskin or kid leather, fold overlap with plain clasp fastener. Either handbag is carried over the lower arm or in the handbag by the shortened strap over shoulder during formation and as prescribed by the commander.

Shirt, Female Officer/Chief Petty Officer

R E S T R I C T E D

R E S T R I C T E D

144

4. Occasion: The uniform shall be worn from Tuesday thru Thursday, on special occasions, or as prescribed.

3.2.6.2 Enlisted Women, Chambray/Dungaree (E1-E6) 1. Description: The same as for female officer’s uniform, its only distinction are the collar ornaments and the chevron. The female enlisted shirt has no shoulder strap. For WAC personnel, the AFP Coat of Arms shall be worn by enlisted women at the right side of the collar while the WAC insignia shall be placed on the left whenever appropriate. The chevron as prescribed shall be used.

2. The female skirt design is the same as that of the officers’ skirt except the materials and fabrics that follows that of the navy enlisted.

3.2.7 Philippine Marine Corps Uniforms 3.2.7.1 Evening Dress Uniform (Mess Jacket, Black / White) 1. Description/Specification: Black Dress Jacket / White, a short body coat, with notched lapels, wearing slightly over the hips, back tapered to a point, inside bosom pocket, braided closing matching high waist trouser with side seam pockets, hook and eye closing, straight leg styling white formal wing collar, shoulder strap. Worn over white long sleeved shirt, trench cuff, with pleated or ruffled front and black round buttons, black pre-tied butterfly

Shirt, Female Enlisted

R E S T R I C T E D

R E S T R I C T E D

145

bow tie. The coat is worn open, but held together in front by two lined buttons. 2. Materials Used: 100% wool (Tropical WT), blend of 55% polyester / 45% wool (Tropical WT). 3. Accoutrements/Accessories: Four large and two small gold tone AFP buttons, miniature medals, metal rank insignia, marine insignia, cummerbund (12.7 cm wide waist band in black satin). 4. Headgear: White Pershing cap, all leather cap frame, vinyl covered visor, gold tone buttons. Chins strap cap cover and cap insignia additional. White felt cap for female officers. 5. Footwear Service Dress Shoes – black leather oxford with plain toe, rubber soles and heels (government issue). Uniform socks cotton hose with nylon-reinforced heel and toes (black). Black pump shoes for female. 3.2.7.2 Dress Blue (Gala) 1. Description: The uniform shall be single-breasted, buttoned to neck stiff standing collar form fitting reaching to about 2.54 cm below the crotch line. 2. Materials Used: 65% polyester / 35% cotton blend 3. Accoutrements/Accessories: Metal rank insignia, AFP decorations and service ribbons, nameplate and various authorized insignias, gold tone buttons, Navy sword and gloves during parades or other occasions as prescribed, Marine insignia type III.

R E S T R I C T E D

R E S T R I C T E D

146

4. Headgear: White Pershing cap, all-leather cap frame, vinyl covered visor and gold tone buttons (chin strap, cap cover and cap insignia additional). White felt cap for female. 3.2.7.3 Service Blouse (Khaki Green) 1. Description: Single breasted with large gilt buttons for front closure pointed collar with notched lapels, and 5 cm belt of same fabric as coat, sewn waist round. Sleeves and cuffs closed without buttons, easy fitting, and length reaching 2.54 cm below crotch line, worn button. 2. Materials Used: 65% polyester / 35% cotton blend 3. Accoutrements/Accessories: Front closure large gilt buttons, small gilt buttons for pocket flaps, Marine black bronze insignia placed vertically on each lapel, shoulder straps provided with metal rank insignia. 4. Headgear: OD Pershing cap, all-leather cap frame, vinyl covered visor and gold tone buttons (chin strap, cap cover and cap insignia additional). White felt cap for female. 3.2.7.4 Bush Coat 1. Materials a. Coat and Trouser – The fabric for coat and trousers shall be gabardine, twill weaves, 100% polyester olive drab green. b. Shirt – The fabric shall be twill weave, 100% polyester olive drab green. 2. Coat, Bush Coat a. Design – The coat shall be made from an approved specification or pattern.

R E S T R I C T E D

R E S T R I C T E D

147

b. General Description – The coat is single-breasted, midsection button is hidden with built-in belt, and sleeves side pressed fitting easily over the chest and shoulder, with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and with no prominent flare. 3. Trouser, Bush Coat a. Design – The trouser shall be made from an approved specification or pattern. b. General Description – The trouser shall be straight legged, without cuffs and with side and hip pockets. Skirts for female. c. Trouser, Leg Ornamentation – Maroon braid. Piping shall be sewn on each outer seam of the trouser leg 3 cm width. 4. Headgear The White Service cap is the standard headgear in this uniform. Female officers shall have the White Felt Cap. The cap shall be made from an approved specification and pattern.

Materials: Officers – Wool felt, green color. Enlisted Personnel – same as the coat or trouser material. 5. Undershirt – White, cotton fabric, round-neck shape. 6. Rank Insignia – Metallic rank insignia fastened on the straps. 7. Occasions for Wear a. Social Functions (Lower than President/VP) b. Send-off to the President, as directed by the CSAFP c. Testimonial Parades d. Unit/Office Anniversary e. Graduation/Commencement Exercises

R E S T R I C T E D

R E S T R I C T E D

148

f. Funeral /Burial Ceremonies g. As maybe prescribed by the Commander 3.2.7.4 Khaki Green (Short Sleeve) 1. Description/Specification: Tucked in khaki shirt with short sleeves, turn down collar and stiff bosom, patch/flap button pockets with matching olive drab trousers/skirts of matching fabric with side seam pockets and straight leg styling.

2. Materials used: Blend of 55% polyester and 45% cotton. 3. Accoutrements/Accessories: Nylon green web belt with marine buckle, nameplate, authorized AFP ribbons, and insignia (optional). 4. Headgear: Green Oversea / Garrison cap. 5. Footwear: Black leather service shoes or safety shoes. Pump shoes for female.

Khaki Shirt, Short Sleeves (Male Officer)

Khaki Shirt, Short Sleeves (Back)

R E S T R I C T E D

R E S T R I C T E D

149

3.2.7.5 Camouflage, BDU Descriptions: 1. Composition Composed of a camouflage coat, trousers and HBT hat, camouflage. 2. Materials a. The fabric is 100% cotton, rip stop, in a four-color camouflage pattern. b. Coat, Camouflage Pattern – The coat is a single breasted “bush type” design with a black yoke, collar, four patch below type pockets with flaps (two upper and two lower). The coat has a straight cut bottom, waist take-up tabs on both sides, and cuffed sleeves with reinforcement patches at the elbows. Marine patch sewn centered on the left pocket. c. Trousers, Camouflage Pattern – The trousers contain four standard type pockets. Reinforcement patches have been added at knees and buttocks. The trousers have adjustable straps at waist and leg hem draw cords. 3. Undershirt –olive drab green, cotton fabric, round-neck shape. 4. Occasions for Wear a. The camouflage uniform may only be worn on duty when prescribed by the Commander.

b. This uniform is used as utility, field, training, or combat uniform and is not to be worn as an all-purpose uniform when other uniforms are more appropriate.

c. It is worn during Fridays, Saturdays, Sundays and holidays. Variations in the combination with other uniforms may however be prescribed by Commanders.

R E S T R I C T E D

R E S T R I C T E D

150

3.2.7.6 Camouflage, BDU Coverall 1. Composition/Descriptions: The Camouflage Coverall is a one-piece design that has a front entry zipped closure; drop seat; extraction strap located on the left sleeve, chest, right and left sides, right-left front hips, right-left upper thigh and right-left lower legs. All pockets have zipper closures. 2. Materials/ Accoutrements/Accessories: The fabric is 100% cotton, rip stop, in a four-color camouflage. Name cloth/tape, marine patch, cloth rank, authorized badges. 3. Undershirt – olive drab green, cotton fabric, round-neck shape. 4. Occasions for Wear The Camouflage Coverall uniform is authorized for year-round wear by all personnel assigned with the armor and maintenance units and may also be worn as prescribed by the Commander. 3.2.7.7 Athletic Uniform Standard athletic uniform shall be camouflage short pants and brown t-shirt on OD green shirt.

Marine Emblem Name Tape/Cloth

Airborne Badge Cloth Rank Insignia

Camouflage Utility Coat

R E S T R I C T E D

R E S T R I C T E D

151

3.3 AUTHORIZED ITEMS AND OCCASIONS FOR WEAR ON UNIFORMS 3.3.1 Navy Officers

3.3.1.1 Evening Dress Uniform (Mess Jacket, Blue/White)

1. Authorized Items

a. Coat, Dinner Dress Blue / White Jacket

b. Shirt, White, Formal c. Trousers, Blue, Evening d. White Service Cap / Felt Cap e. Shoes, Dress, Black/ Pump (female) f. Socks, Black g. Undershirt, White h. Cuff Links, Gold i. Cummerbund, Black j. Necktie, Bow, Black/Crescent k. Miniature Awards and Decorations

2. Occasion for wear Worn when attending official functions when civilians normally wear black tie or coat and tie such as formal dinner. 3.3.1.2 Dress Blue 1. Authorized Items

a. Coat, Service Dress Blue b. Shirt, White Dress c. Trousers/Skirt, Blue, Dress d. Service Cap, Combination, White /

Felt e. Shoes, Dress, Black / Pump f. Socks, Black g. Undershirt, White h. Belt, Black i. Necktie, Black / Crescent j. Buckle, Silver

R E S T R I C T E D

R E S T R I C T E D

152

2. Occasion for Wear It is prescribed as wear year-round to all official functions when formal dress, dinner dress or full dress uniforms are not prescribed and civilian equivalent dress is coat and tie. 3.3.1.4 Undress White 1. Authorized Items

a. Shirt, White, Summer b. Trousers, White c. Service Cap, Combination, White /

Felt d. Shoes, Dress, White / Black Pump

shoes (female) e. Socks, White/Nylon Hose f. Undershirt, White g. Belt, White, w/ Gold Clip h. Buckle, Silver i. Shoulder Boards (Hard) j. Ribbons

2. Occasion for Wear Worn for semi-formal occasion where dress uniforms are inappropriate. It is the prescribed uniform during Mondays. 3.3.1.5 Coverall Blue 1. Authorized Items

a. Coveralls b. Cap, Ball, Black c. Shoes, Safety, Black d. Socks, Black e. Undershirt, White Crew Neck f. Collar Insignia

2. Occasion for Wear Worn when other uniforms would be unsafe or become unduly soiled. The coverall uniform is designed to be the principal underway uniform of the day. When worn in port, coveralls may be worn on the pier in the immediate vicinity of the ship.

R E S T R I C T E D

R E S T R I C T E D

153

3.3.1.6 Athletic Uniform – As prescribed by the Commander.

3.3.2 Navy Enlisted (E-7 to E-9)

3.3.2.1 Dress White

1. Authorized Items

a. Coat, Service Dress White b. Trousers, White c. Service Cap, Combination, White /

Felt d. Shoes, Dress, Black / Pump e. Socks, Black / Nylon Hose f. Undershirt, White g. Belt, White, w/ Gold Clip h. Buckle, Silver i. Shoulder Boards (Hard) j. Ribbons

2. Occasion for Wear

It is prescribed as wear year-round to all official functions when formal dress, dinner dress or full dress uniforms are not prescribed and civilian equivalent dress is coat and tie. 3.3.2.2 Dress Blue 1. Authorized Items – same as in Dress White. 2. May be used as alternate to Dress White. 3.3.2.3 Undress White (Summer White) 1. Authorized Items

a. Shirt, White, Summer b. Trousers, White c. Service Cap, White / Felt d. Shoes, Dress, Black / Pump e. Socks, Black / Nylon Hose f. Undershirt, White g. Belt, White, w/ Silver Clip h. Buckle, Silver

R E S T R I C T E D

R E S T R I C T E D

154

i. Rating Badge j. Ribbons

2. Occasion for Wear Worn for semi-formal occasion where dress uniforms are inappropriate. It is the prescribed uniform during Mondays. 3.3.2.4 Service Khaki (Working Khaki) 1. Authorized Items

a. Shirt, Khaki Service b. Trousers, Khaki, Service / Skirt c. Cap, Oversea, Khaki or Ball Cap d. Shoes, Dress, Black / Pumps e. Socks, Black / Nylon Hose f. Undershirt, White g. Belt, Khaki, w/ Silver Clip h. Buckle, Silver i. Collar Rank Insignia

2. Occasion for Wear Worn for office work, watch standing, or business ashore when prescribed as uniform of the day. 3.3.2.5 Blue Coverall 1. Authorized Items

a. Coveralls b. Cap, Ball, Khaki c. Shoes, Safety, Black d. Socks, Black e. Undershirt, White Crew Neck f. Collar Insignia

2. Occasion for Wear Worn when other uniforms would be unsafe or become unduly soiled. The coverall uniform is designed to be the principal underway uniform of the day. When worn in port, coveralls may be worn on the pier in the immediate vicinity of the ship.

R E S T R I C T E D

R E S T R I C T E D

155

3.3.2.6 Athletic Uniform – As prescribed by the Commanders.

3.3.3 Navy Enlisted (E-1 to E-6) 3.3.3.1 Service Dress White Jumper (White Alpha) 1. Authorized Items

a. Jumper, White Dress b. Trousers, White Jumper / Skirt c. Hat, White d. Shoes, Dress, Black / Pump e. Socks, Black / Nylon Hose f. Undershirt, White Crew Neck g. Belt, White, w/ Silver Clip h. Neckerchief i. Buckle, Silver j. Rating Badge/Service Stripes k. Ribbons or Medals (depending on

occasions) 2. Occasion for Wear A formal uniform for Philippine Navy enlisted personnel in all official functions. 3.3.3.2 Service Dress Blue Jumper – Same as in Service White Jumper. 3.3.3.3 Undress White (Summer White) 1. Authorized Items

a. Shirt, White, Summer b. Trousers, White / Skirt c. Cap, White d. Shoes, Dress, Black / Pump e. Socks, Black / Nylon Hose f. Undershirt, White g. Belt, White, w/ Silver Clip h. Neckerchief i. Buckle, Silver j. Rating Badge/Service Stripes k. Ribbons or Medals (depending on

occasions)

R E S T R I C T E D

R E S T R I C T E D

156

2. Occasion for Wear A formal uniform for Philippine Navy Enlisted Personnel in all official functions. 3.3.3.4 Dungaree / Chambray 1. Authorized Items

a. Shirt, Chambray, Short Sleeve b. Trousers, Dungaree / Skirt c. Cap, White d. Shoes, Safety, Black /Pump e. Socks, Black / Nylon Hose f. Undershirt, White Crew Neck g. Belt, Black h. Buckle, Silver i. Rating Badge

2. Occasion for Wear Worn for office work, watch standing, or business ashore when prescribed as uniform of the day. Also worn when other uniforms would be unsafe or become unduly soiled. 3.3.3.5 Blue Coverall 1. Authorized Items

a. Coveralls b. Cap, Ball, Khaki c. Shoes, Safety, Black d. Socks, Black e. Undershirt, White Crew Neck f. Collar Insignia

2. Occasion for Wear Worn when other uniforms would be unsafe or become unduly soiled. The coverall uniform is designed to be the principal underway uniform of the day. When worn in port, coveralls may be worn on the pier in the immediate vicinity of the ship. 3.3.3.6 Athletic Uniform – As prescribed by commanders.

R E S T R I C T E D

R E S T R I C T E D

157

3.3.4 Marine Officers 3.3.4.1 Evening Dress Uniform (Mess Jacket, Black / White) 1. Authorized Items

a. Marine Insignia Type III both lapels b. Metal Rank Insignia c. Black Tuxedo Dress Shirt d. Black Bow Tie / Crescent e. White Service Cap / Felt f. Black Tuxedo Trousers / Skirts g. Black Sash h. Black Patent-Uniform Shoes / Pump i. Black Socks / Nylon Hose j. Gilt Buttons k. Miniature Medals l. Connecting Waistline Gilt Buttons

2. Occasion for Wear For use during formal evening socials and all other functions when formal wear with mess jacket is prescribed and the civilian equivalent is the coat and tie. 3.3.4.2 Dress Blue with Sword (Gala) 1. Authorized Items

a. Close Collar, Blue Coat b. Marine Insignia Type III on both

sides of collar. c. Metal Rank Insignia fastened on

both shoulder straps. d. Nameplate e. Gilt Buttons f. White Trousers / Skirts g. Black Shoes / Pump h. Black Socks / Nylon Hose i. White Pershing Cap / Felt White j. White Gloves k. White Quarter Sleeve

l. Round Neck T-Shirt m. Sam Brown Belt n. Sword with Scabbard o. Medals and Lanyard

R E S T R I C T E D

R E S T R I C T E D

158

2. Occasion for Wear Dress Blue with sword: for special ceremonies and parades. Equivalent to Navy’s Dress White with sword. 3.3.4.3 Service Blouse (Khaki Green) 1. Authorized Items a. Olive Drab Green Coat b. Marine Insignia Type IV on both Lapels c. Metal Rank Insignia fastened on both shoulder straps d. Bronze Buttons e. Khaki Shirt Long Sleeve w/ Miniature Metal Rank Insignia on both sides of the collar

f. Khaki Tie w/ Cravat Clasp g. Green Trouser w/ Maroon Trimming h. Black Shoes / Pumps i. Black Socks / Nylon Hose j. Olive Drab Green Pershing Cap

/Felt White k. White Quarter Sleeves Round Neck

T-Shirt l. Marine Buckle (Type I and II)

2. Occasions for Wear Major Service Anniversary, Witnessing Honors for Pres/VP, Courtesy Call, New Year’s Call at GHQ/DND.

Marine Emblem Pershing Cap Device, Enlisted

Marine Emblem Collar Device

Marine Emblem

R E S T R I C T E D

R E S T R I C T E D

159

3.3.4.4 Bush Coat 1. Authorized Items a. Olive Drab Pershing Cap b. Metal Rank Insignia on shoulder straps c. Gilt Buttons

d. Olive Drab Coat e. Ribbons and Badges f. Shoulder Tab g. Marine Buckle (Type 1) h. Olive Drab Trouser with Maroon

Trimming i. Green Web Belt with Marine Buckle

(Type 11) j. Black Low Cut Shoes k. Black Nylon Socks / Nylon Hose

2. Social functions, send-off to the President as prescribed by CSAFP, Unit/Office Anniversary, and Graduation or Commencement Exercises. 3.3.4.5 Khaki Green (Short Sleeve) 1. Authorized Items

a. Khaki Shirt Short Sleeve b. Miniature Metal Rank Insignia on

both collars c. Nameplate d. Green Web Belt e. Olive Drab Trouser with maroon

Trimming/Skirt for female f. Black Shoes / Pump g. Black Socks / Nylon Hose h. Cap White / Felt i. Badges j. Without Ribbons k. White Quarter Sleeves with Round

Neck T-Shirt 2. Occasion for Wear General Office Uniform from Tuesday to Thursday; Equivalent to PN Working Khaki.

R E S T R I C T E D

R E S T R I C T E D

160

3.3.4.6 Camouflage, BDU 1. Authorized Items

a. Coat Camouflage Long Sleeves b. Collar Rank Insignia (Embroidered-

Black) c. Marine Emblem Patch d. Green Web Belt e. Black Combat Boots f. Black Socks g. Utility Cap or HBT (Marine Seal,

Rank Insignia at Front Center) h. Olive Drab Green Round-neck T-

Shirt 2. Occasion for Wear General Office Uniform on Fridays, Saturdays, and Sundays, field day, inclement weather, or on condition red alert, parades and rehearsals, or as the Commander may prescribe. 3.3.4.7 Camouflage, BDU Coverall 1. Authorized Items

a. Coat Coverall Camouflage Long Sleeves

b. Collar Rank Insignia (Embroidered-Black)

c. Name Cloth/Tape (Family Name Embroidered Black, Green Background)

d. Marine Emblem Patch e. Black Combat Boots f. Black Socks g. Utility Cap or HBT (Marine Seal,

Rank Insignia at Front Center) h. Olive Drab Green Round-neck T-

Shirt 2. Occasion for Wear General uniform of personnel assigned with Armor BN and utility uniform for Motor Transport Battalion.

R E S T R I C T E D

R E S T R I C T E D

161

3.3.4.8 Athletic Uniform (MO-D1) 1. Authorized Items

a. Camouflage Short Pants b. Light Brown/Olive Drab Green

Round-neck T-Shirt c. White Socks d. Rubber Shoes

3.3.5 Enlisted Marines (E-1 to E-9)

3.3.5.1 Dress Blue (Gala) 1. Authorized Items

a. Marine Insignia Type III on both sides of collar

b. Collar Clips and Pieces Cuff (White) c. Chevrons with Red Stripes and

yellow background (For E1 to E6) sewed on both sleeves d. Gilt Buttons e. White Web Belt with Big Marine

Insignia attached to the dress buckle. f. Nameplate g. Black Shoes / Felt h. Black Socks Nylon Hose i. White Frame Cap /Felt Cap j. Hash Mark/Service Stripes

2. Occasion for Wear For special ceremonies, parades, escorts, requiring the use of gala. 3.3.5.2 Service Blouse (Khaki Green) 1. Authorized Items

a. Marine Insignia Type IV on both lapels, chevrons on both sleeves (Red Stripes and OD Background)

b. Nameplate c. Bronze Buttons d. Shirt Long Sleeve (Khaki) with

Marine Insignia on both side of collar e. Khaki Tie with Cravat Clasp

R E S T R I C T E D

R E S T R I C T E D

162

f. Green OD Trousers/Skirts g. Black Shoes / Pump h. Black Socks / Nylon Hose i. White Frame Cap / Felt

2. Occasion for Wear For use in colder regions, during cold weather season or as the Commander may prescribe. 3.3.5.3 Bush Coat 1. Authorized Items

a. Pershing Cap White / Felt b. Metal Rank Insignia c. Gilt Buttons d. Olive Drab Coat e. Ribbons and Badges f. Marine Shoulder Tab g. Nameplate h. Marine Buckle (Type 1) i. Olive Drab Green Trouser w/

Maroon Stripes/Skirts for female j. Green Belt Buckle (Type 11) k. Black Low Cut Dress Shoes / Pump l. Black Socks / Nylon Hose

2. Occasion for Wear Worn on Mondays or as the Commandant may prescribe. 3.3.5.4 Khaki Green (Long Sleeve) 1. Authorized Items

a. Marine Insignia on both collar b. Khaki Tie with Cravat

Clasp/Crescent for female c. Khaki Shirt Long Sleeve d. Chevrons on Both Sleeves e. Nameplate f. Green Trousers w/ Maroon

Stripes/Skirts for female g. Green Web Belt

R E S T R I C T E D

R E S T R I C T E D

163

h. Black Shoes / Pumps i. Black Socks/Nylon Hose j. White Frame Cap/Felt Cap

2. Office uniform (for MSEG personnel only) on Monday or as the Commander may prescribe. For others, as the Commandant and Commander may prescribe. 3.3.5.5 Khaki Green (Short Sleeve) 1. Authorized Items

a. Marine Insignia on both sides of collar

b. Shirt Short Sleeve (Khaki) c. Chevrons on both sleeves d. Nameplate e. Belt Waist Web (Green) f. Green Trousers w/ Maroon

Stripes/Skirt for female g. Black Shoes / Pump h. Black Socks / Nylon Hose

2. Occasion for Wear Worn during Mondays to Thursdays. Used as General Office Uniform. 3.3.5.6 Camouflage, BDU 1. Authorized Items

a. Coat Camouflage Long Sleeve b. Collar Rank Insignia (Embroidered) c. Name Cloth/Tape (Family Name

Embroidered) d. Marine Emblem Patch e. Green Web Belt f. Black Combat Boots g. Black Wool Socks h. Utility Cap or HBT (Marine Seal,

Rank Insignia At Center) i. T-Shirt, Olive Drab Green Round

Neck 2. Occasion for Wear

R E S T R I C T E D

R E S T R I C T E D

164

General uniform on Fridays, field day, inclement weather, or on condition red alert, parades and rehearsals, or as the commander may prescribe. 3.3.5.7 Camouflage, BDU Coverall 1. Authorized Items

a. Coverall Camouflage Shirt Long Sleeve

b. Collar Rank Insignia (Embroidered-Black)

c. Name Cloth (Family Name Embroidered-Black, Green Background)

d. Marine Emblem Patch e. Black Combat Boots f. Black Socks g. Utility Cap or HBT (Marine Seal,

Rank Insignia at Front Center) h. Olive Drab Green Round Neck T-

Shirt 2. Occasion for Wear General uniform of armor personnel and utility uniform for Maintenance Battalion personnel. 3.3.5.8 Athletic Uniform 1. Authorized Items

a. Camouflage Short Pants b. Brown / Green T-Shirt c. White Socks

d. Rubber Shoes 2. Occasion for Wear For use during athletic day or as prescribed by Commanders.

R E S T R I C T E D

R E S T R I C T E D

165

3.3.6 Headgears and Caps (Officers) 3.3.6.1 Service Cap 1. A combination type cap with visor. The frame shall be constructed that a khaki (olive drab green for Marines) or plain white cloth cover may be fitted. It shall be stiff, standing and fleering throughout its circumference to give the outer edge of the cover a rolled or rounded effect, rather than one having a thin edge. In general, the measurement with cover on should be as follows: a. Length of crown at grommet – 27 cm

b. Width – 25 cm c. Extended height in rear from bottom of frame to top of grommet – 3.14 cm d. In front and from visor to top – 8.9 cm e. Hat to be fitted with a grommet of non-rust, non-magnetic material about 3.6 cm wide secured into the binding at the top. 2. For officers of flag rank, the top of the visor shall be embroidered full in gold double braid of sampaguita clusters.

3. For Lieutenant Commanders to Captains (Majors to Colonels in the Marines), the top of the visor shall be embroidered along the edge with a single braid of gold sampaguita clusters. 4. For Lieutenants (Captain in the Marines) and below, the visor shall have a polish black plain finish.

LCDR / MAJ to CAPT / COL COMMO to ADM

R E S T R I C T E D

R E S T R I C T E D

166

5. A gold and adjustable strap in the top of visor 1.3 cm in width and 24 cm in length is fastened at each end of visor with small regulation cap buttons. 6. The AFP cap devise for commissioned officers is mounted on the black cap band. 7. The rain cap cover is to be used with the service caps during inclement weather. It shall be made of waterproof, transparent plastic. The cover shall fit closely over the cap devise. For caps with embroidered visor, there shall be an extension of the cap cover to protect the visor. 3.3.6.2 Headgears and Caps (Chief Petty Officers) 1. The same in design and construction as those authorized for officers (Lieutenants and below) except that the chinstrap shall be of patent black leather and that the cap devise shall be that of the Chief Petty Officer consisting of two crossed gold foul anchors with a super-imposed silver shield. The devise may be made of solid metal or embroidered.

2. Rain Cap Cover – Same as for Officers. 3.3.6.3 Headgears and Caps (Enlisted Personnel) 1. Hat, White – Shall be made of bleached cotton twill with rounded crown and full stitched brim.

Chief Petty Officer Headgear

Oversea Cap Service Frame Cap

R E S T R I C T E D

R E S T R I C T E D

167

2. Cap, Watch – This garment shall be made of dark blue knitted wool, conical in shape, 24.5 cm long with 6.35 cm in diameter. To be used aboard ship by enlisted only. 3.3.6.4 Headgears and Caps (Marines, Enlisted) 1. The Marine Service Cap shall be the same as that of Marine Lieutenants except that the chinstrap shall be of patent black leather and the cap device shall be the Marine Seal type IV. 2. Rain Cap Cover – Same as for officers.

3.3.6.5 Female Officers / Enlisted 1. Female officers standard headgear is the white felt cap. The white felt cap is worn whenever the service Pershing cap is prescribed except on the office uniform where oversea / garrison cap is the standard headgear. 2. The enlisted white felt cap is the standard headgear for all uniforms except on the office uniform where oversea / garrison cap is the standard headgear. 3.3.6.6 Oversea / Garrison Caps 1. The oversea/garrison cap is the standard headgear when wearing the office uniform except when prescribed otherwise.

Hat, White (E1 to E6)

Cap Device Marine Seal

Marine Service Frame Cap

R E S T R I C T E D

R E S T R I C T E D

168

2. It is also the standard headgear for all uniforms when traveling abroad except on the Navy Dress White and the Marines Dress Blue.

3.3.6.7 Camouflage Utility Cap HBT (Officers/Enlisted)

The Herring Bone Twil (HBT) cap, camouflage 100% cotton shall be the authorized headgears for Camouflage Uniform. The visor is half oblong, line on both sides with same material served in to the front center of the crown. The visor shall have a support of no. 2 canvass and at its broadest part shall be 7 cm wide. Sweatband shall be of same material. Crown piece shall have 8 darts.

3.3.7 Shoes (Footwear) 1. Black Shoes – Shall be low-cut style of black leather, wet-look with oil resistant and non-skid sole laced.

2. White Shoes – Shall be low-cut style, white polished leather and laced. Soles and heels shall be white. 3. Pump Shoes – shall be conservative cut with closed toes and heel without ornamental stitching on seams, smooth or synthetic leather. 4. Safety Shoes – Shall be low-cut style, black leather, reinforced with steel toe, oil resistant and non-skid sole, laced.

Marine Patch

Rank Insignia (Cloth)

Dress Shoes (Male) Pump Shoes (Female)

HBT Cap

Crown

R E S T R I C T E D

R E S T R I C T E D

169

5. Rain Boots – Shall be half knee high, rubberized, black with oil resistant and non-skid sole. 6. Socks – Shall be plain knitted material and undecorated. At all times, the color of the socks shall match the color of the shoes being worn. 3.3.7.1 Chief Petty Officer 1. Black Shoes – Same as for officers. 2. Safety Shoes – Same as for officers. 3. Rain Boots – Same as for Officers. 4. Socks – Same as for Officers. 3.3.7.2 Enlisted Personnel 1. Black Shoes – Shall be black low-cut style, laced and of black leather material with oil-resistant and non-skid sole. 2. Pump Shoes – same as for the officers. 3. Safety Shoes – Same as for officers. 4. Rain Boots – Same as for officers. 5. Socks – Same as for officers. 3.3.8 Belts and Buckles 3.3.8.1 Officers – A 3.8 cm belt of web material and color as the trousers and equipped with the plain silver buckle 5 cm in length with PN logo at the center of the buckle shall be used. 3.3.8.2 Chief Petty Officer’s Belts and Buckles – Same as for officers. 3.3.8.3 Enlisted Personnel Belts and Buckles – Shall be webbed cotton and is either black or white, approximately 3.8 cm wide, to be worn with dungaree or white uniforms, respectively. To be fitted with non-tarnishing metal slip buckle and end tip with PN logo at the center of the buckle.

R E S T R I C T E D

R E S T R I C T E D

170

3.3.8.4 For Marine Officers / Enlisted Personnel - It shall be the green web belt, 3.8 cm in width. The Marine buckle shall be the common waist belt buckle in all of uniform trousers. The buckle shall be made of chrome plating or silver colored metals.

3.3.9 Athletic Rubber Shoes (For Officer/CPO and EP) Athletic Rubber Shoes – All types of athletic shoes, white in color, to be worn with white athletic socks or as prescribed by Commanders. 3.4 INSIGNIA AND AWARDS The Philippine Navy practices the same customs and traditions as that of the United States Navy. Ranks, rates and ratings were likewise conceived in the same manner. Since the Philippine Navy wanted to fit these customs and traditions historically, geographically, and economically in the Philippine settings, some were omitted and new ones formulated. Grades for Navy and Marine officers are O-1 to O-10 while the enlisted rates are from E-1 to E-9. All Navy personnel have rates (ranks) and specializations or ratings.

3.4.1 Ranks and Sleeve Markings

Hereunder are illustrations of the Philippine Navy’s ranks, rates and ratings: 3.4.1.1 Collar / Shoulder Insignia

Collar insignia Shoulder Board/Marks

Rank Navy/Marines Navy Marines

ENS / 2LT

Navy Buckle Marine Buckle

R E S T R I C T E D

R E S T R I C T E D

171

LTJG / 1LT

LT / CPT

LCDR / MAJ

CDR / LT COL

CAPT / COL

COMMO / BGEN

R/ADM / MAJ GEN

VADM / LT GEN

ADM / GEN 3.4.1.2 Sleeve Markings ENS

LCDR

COMMO

LTJG

CDR

RADM

R E S T R I C T E D

R E S T R I C T E D

172

Shoulder Board

LT

CAPT

VADM

ADM

3.4.2 Rates & Ratings

3.4.2.1 Rates Collar Insignia Chevron Rates Navy Marines Navy Marines

ASN / PVT N/A

SN2 / PFC N/A

SN1 / CPL N/A

PO3 / SGT N/A

PO2 / SSGT N/A

PO1 / TSGT N/A

CPO / MSGT

R E S T R I C T E D

R E S T R I C T E D

173

SCPO / SMSGT

MCPO / SGT MAJOR 3.4.2.2 Ratings

R E S T R I C T E D

R E S T R I C T E D

174

3.4.3 Use of Awards

Philippine Navy awards are used and worn as prescribed in AFP Regulation G 131-053 and as amended by Changes 1-5. Decorations and service medals are not worn in uniforms together with their corresponding ribbons. Officers suspended from rank or command or enlisted personnel serving sentence or confinement are prohibited form wearing decorations, medals or substitutes therefore. 3.4.4 Wearing of Awards and Decorations 1. Policies: a. Military awards and decorations serve as the Command’s tangible recognition to an individual or unit’s act of heroism and exemplary or meritorious services or performance of duties. As such, they provide the appropriate encouragement towards greater efforts in more intense dedication to their duties and foster higher morale and esprit de corps within the entire Command. b. For a military award and/or decoration to be truly meaningful, such an award and/or decoration must be beyond any doubt, deserved and timely. c. Military awards and decorations bestowed for meritorious acts exclude service medals and ribbons, and other professional badges and emblems such as Command, parachutist, marksmanship, air observer, etc. 2. Authorized Badges, Ribbons and Decorations a. The General Office Uniform shall be worn without the ribbons and decorations, but with only a maximum of three (3) badges. The occupational specialty badge is 0.3 cm above the top seam left breast pocket while the Eligibility Badge is placed on the center of the left breast pocket. The highest military career-schooling badge earned is placed on the center of the right breast pocket whenever practicable. However, the ribbons and decorations maybe worn on the following occasions: 1) TV Talk shows interviews 2) Speaking engagements 3) Individual calls to public officials 4) Appearing to Board interviews

R E S T R I C T E D

R E S T R I C T E D

175

b. The authorized badges, ribbons and other decorations may be worn as part of the Bush Jacket/Undress White, Major Service Blouse, White Duck/Dress White and Mess Jacket in accordance with the existing regulations. c. Ribbons should be made of silk moiré fabric and worn above the left breast pocket in rows of three atop the left breast pocket. The highest award should be to the right in the upper row and the lowest award in the lowest row to the wearer’s left. d. Honorary Badges shall be placed centered on the left pocket flap or as prescribed. 3.4.5 Command-At-Sea Badge 3.4.5.1 Command-At-Sea Badge 3.4.5.2 Senior Command-At-Sea Badge 3.4.5.3 Senior Command-At-Sea Badge With Stars 3.4.5.4 Flag Rank Command Badge/Honorary 1. Eligibility a. Upon recommendation by the PN Command-At-Sea Selection Board, the Command-At-Sea Badge or the Senior Command-At-Sea Badge is awarded by the Flag Officer-In-Command, PN as the case may be in an appropriate order to a naval officer who has satisfied the minimum requirements as prescribed in para 5 of AFPR G 132-051 GHQ AFP dated 04 September 2001. b. Incumbent Commanding Officers of PN commissioned vessels shall be authorized to wear the Command-At-Sea Badge, on an interim basis, until such time that this authority is revoked for cause or affirmed by the PN Command-At-Sea Selection Board upon successful completion of Command. c. Incumbent Naval Task Force, Task Groups/Squadron Commanders shall be authorized to wear the Senior Command-at-Sea badge, on an interim basis, until such time that this authority is revoked for cause or affirmed by the PN Command-At-Sea Selection Board upon successful completion of Command. d. Officers shall be authorized to wear the Flag Rank Command-At-Sea Badge upon assuming command of any of the following PN Units: Philippine Fleet, Naval Forces and such other Forces with Commanders having the TO position of O7 and with organic or operationally controlled commissioned vessels.

R E S T R I C T E D

R E S T R I C T E D

176

e. Flag Rank Officers shall be authorized to wear the Flag Rank Command-At-Sea Badge upon assuming Command of a PN Support Command or unit with a rank requirement of O7 or higher. 2. Description a. Command-At-Sea Badge – A circular sampaguita garland with an anchor at the center, over which a sea lion engarde is superimposed measuring 2.30 cm in diameter and is made of bronze. b. Senior Command-At-Sea Badge – the same as the Command-At-Sea Badge but is made of silver instead of bronze. c. Senior Command-At-Sea Badge with Stars – the same as the Command-At-Sea Badge that is made of gold with one star fixed at each tip and another on top of the ring linkage of the anchor. d. Flag Rank Command Badge/Honorary Flag Rank Command Badge – oblong in shape measuring 2.2 cm X 3.8 cm with three (3) stars aligned at the top and is made of gold. 3. Manner of Wearing a. The PN Command-At-Sea Badge shall be worn at all times by the eligible officer when in uniform. The badge is worn 0.3 cm centrally above the right breast pocket while in actual Command. It is worn 0.3 cm above the left breast pocket or line of medals, ribbons, or other AFP and PN badges when no longer in command. b. The Senior Command-At-Sea Badge with stars supersedes the Senior Command-At-Sea Badge, while the Flag Rank Command-At-Sea Badge supersedes the Senior Command-At-Sea Badge with stars. Hence, only the highest command badge earned shall be worn. c. Command badges shall take precedence over all other badges, hence, it shall be placed 0.30 cm above all other badges.

R E S T R I C T E D

R E S T R I C T E D

177

3.4.6 Marine Command Badge 3.4.6.1 Bronze Command Badge without Star 1. Eligibility a. At least two (2) years active commissioned service. b. At least, one (1) year continuous duty assignment with the Philippine Marine Corps. c. Satisfactory service as Platoon Commander for at least ten (10) continuous months; or eight (8) continuous months in an operational area; or six (6) continuous months in a combat area. 2. Description Oxidized bronze device consisting of a straight anchor and crossed rifles. 3.4.6.2 Bronze Command Badge with Star 1. Eligibility a. At least, three (3) years active commissioned service. b. At least, two (2) years continuous duty assignment with the Philippine Marine Corps. c. Satisfactory service as Commanding Officer of a Company for at least one (1) continuous year; or ten (10) continuous months in an operational area; or six (6) continuous months in a combat area. 2. Description Oxidized bronze device consisting of a straight anchor and crossed rifles with a five-pointed star.

R E S T R I C T E D

R E S T R I C T E D

178

3.4.6.3 Silver Command Badge 1. Eligibility a. At least, seven (7) years active commissioned service. b. At least, five (5) years continuous service as a Marine Officer. c. Satisfactory service as Commanding Officer of a Battalion for at least two (2) continuous years; or one (1) continuous year in an operational area; or eight (8) continuous months in a combat area. 2. Description Sterling silver device similar in design to the Bronze Command Badge with star. 3.4.6.4 Silver Command Badge with Sampaguita Garland 1. Eligibility a. At least, fifteen (15) years active commissioned service. b. At least, ten (10) years continuous service as a Marine Officer. c. Satisfactory service as Commanding Officer of a Brigade/Group of two or more Battalions for at least two (2) continuous years; or one (1) continuous year in an operational area; or eight (8) continuous months in a combat area. 2. Description Sterling silver device similar in design to the Bronze Command Badge with a garland of sampaguita leaves formed around the star.

R E S T R I C T E D

R E S T R I C T E D

179

3.4.6.5 Gold Command Badge with Sampaguita Garland 1. Eligibility a. Awarded for command of the Philippine Marine Corps regardless of the size of the organization. b. Awarded for command of two (2) or more Brigades/Groups of two (2) or more Battalions or equivalent Marine Units. c. At least, fifteen (15) years active commissioned service. d. At least, fifteen (15) years continuous service as a Marine Officer. e. Satisfactory service as Commanding Officer for at least two (2) continuous years; or one (1) continuous year in an operational area; or eight (8) continuous months in a combat area. 2. Description Gold-plated device similar in design to the Silver Command Badge with Sampaguita Garland. 3. Manner of Wearing a. For incumbent Platoon Commanders and Commanding Officers, the badge shall be worn 0.30 cm above the center of the right breast pocket, 0.3 cm above other badges or line of ribbons. b. For non-incumbent Platoon Commanders or Commanding Officers, the badge shall be worn 0.30 cm centered above the left breast pocket or 0.30 cm above other badges or line of ribbons. c. Only the highest Marine Command Badge earned may be worn at any time. d. Newly designated commanders may wear the command badges required of their command on interim basis until revoked for cause or confirmed by the Commandant, Marine Corps.

R E S T R I C T E D

R E S T R I C T E D

180

e. Command badges shall take precedence over all other badges, hence, it shall be placed 0.30 cm above all other badges. 3.4.7 Naval Aviation Badges 3.4.7.1 Naval Aviation Badge (Naval Pilot Rating Badge) 1. Eligibility a. Must be a commissioned naval officer and in the active service of the AFP. b. Must be a graduate of basic pilot training in a PN recognized aviation/flying school. c. Must have been checked-out as a First Pilot in any type of aircraft in the inventory of the PN. d. Must have logged at least 175 flying hours in any fixed wing aircraft or 150 flying hours in any rotary wing type aircraft in the inventory of the PN as Pilot-in-Command. 2. Description A gold plated badge consisting of a fouled anchor 2.54 cm high and a pair of wings attached to the shank displayed 7.7 cm in span. The seal of the Republic in the relief and in enameled colors measuring 1 X 1.4 centimeters is placed at the center of the shank and wings. 3.4.7.2 Senior Pilot Rating Badge 1. Eligibility a. Must be an awardee of the Naval Aviation Badge as a rated First Pilot. b. Must have the rank of LT or above. c. Must have logged a total flying time of at least 1,500 flying on a fixed wing aircraft or at least 1,250 flying hours on a rotary wing aircraft as Pilot-in-Command.

R E S T R I C T E D

R E S T R I C T E D

181

2. Description A gold plated badge, the size and shape of which is similar to the First Pilot Rating Badge with an 8.4-millimeter high gold plated star placed above the stock of the anchor. 3.4.7.3 Command Pilot Rating Badge 1. Eligibility a. Must be an awardee of the Naval Aviation Badge with a Senior Pilot Rating. b. Must have the rank of CDR or above. c. Must have logged a total flying time of at least 2,500 hours on a fixed wing aircraft or 2,000 hours on a rotary wing aircraft as Pilot-in-Command. d. The Flag Officer In Command, PN upon appointment as such, or a Flag Officer in the PN, upon promotion as such, or a Commander of a naval aviation organization shall be automatically rated as a Command Pilot provided he holds a valid aeronautical rating of at least First Pilot. 2. Description A gold plated badge, the size and shape of which is similar to the Senior Pilot Rating Badge with a circular gold plated sampaguita garland placed around the star. 3.4.7.4 Honorary Naval Aviation Badge 1. Eligibility a. Individual military or civilian personnel who have contributed to the training and development of the naval aviation. b. Foreign dignitaries who have contributed to the development of aerospace technology. c. Civilian dignitaries who have contributed to the development of the aerospace technology.

R E S T R I C T E D

R E S T R I C T E D

182

d. Other personages whose achievements have directly or indirectly contributed to the advancement of aerospace technology. 2. Description A gold plated badge consisting of a fouled anchor 2.54 cm high and a pair of wings attached to the shank displayed 7.7 cm in span. A 1.3 cm diameter Philippine Navy Seal without the anchor in relief and in enameled color is set at the center of the shank and wings. The navy seal is bordered by rope. 3.4.8 Aircraft Maintenance Officer Badge 1. Eligibility a. Must be a commissioned officer in the active service of the AFP. b. Must be assigned to a naval aviation organization and performing the Aircraft Maintenance Officers Rating for at least two (2) years. c. Must be a graduate of a four-year Aeronautical Engineering Course or a graduate of aircraft maintenance officers’ course from a recognized military/civilian school. 2. Description A silver-plated badge with the pair of wings displayed 7.7 cm in span. Fouled anchor 2.0 cm high is embossed over a 21-tooth gear set at the center of the wings. The gear has 2.0 cm outside diameter and 1.7 cm inside diameter. 3.4.9 Aircraft Observer Badge 1. Eligibility a. Must be a commissioned officer in the active service of the AFP who has completed Basic Pilot Training, Aerial Navigation and Flight Training, Radar Intercept Officer Training or Anti-Submarine Warfare Officer Training in accordance with a duly prescribed PN training directive. b. Must be physically qualified for flying duty in accordance with AFPR F 161-121 DND, GHQ AFP dated 21 January 1954.

R E S T R I C T E D

R E S T R I C T E D

183

2. Description A silver-plated badge with the pair of wings displayed 7.7 cm in span. A fouled anchor 2.0 cm high is embossed over the white enameled circular disc 2.0 cm in diameter set at the center of the wings. The white diameter circular disc is bordered by rope. 3.4.10 Flight Surgeon Badge 1. Eligibility a. Must be a commissioned officer in the Medical Corps. b. Must be a graduate of an aero medical course from a civilian or military school of aerospace medicine recognized by the PN. c. Must be physically qualified for flying duty in accordance with AFPR F 161-121 DND, GHQ AFP dated 21 January 1954. 2. Description A silver-plated badge consisting of a fouled anchor 2.54 cm high and a pair of wings attached to the shank displayed 7.7 cm in span. At the center of the shank and wings is the caduceus, the universally accepted symbol of the medical profession with two (2) serpents facing each other. Around the caduceus is an oval shaped entwined macabuhay plant. The caduceus with the oval measures 1 cm X 1.4 cm. 3.4.11 Flight Nurse Badge 1. Eligibility a. Must be a commissioned officer in the Nurse Corps. b. Must have successfully completed a course for flight nurse at a civilian or military school of aerospace medicine recognized by the PN. c. Must be physically qualified for flying duty in accordance with AFPR F 161-121 DND, GHQ AFP dated 21 January 1954.

R E S T R I C T E D

R E S T R I C T E D

184

2. Description A silver plated badge, the size and shape of which is similar to the Flight Surgeon Badge but with only one serpent. 3.4.12 Naval Aircrew Badge 1. Eligibility a. Must be assigned with the naval aviation organization. b. Must be a graduate of a two-year Aircraft Maintenance or Engineering Course or the Basic Aircraft Maintenance Course from a recognized civilian/military school. c. Must be professionally and physically qualified to perform the skills required by appropriate and current naval aviation job classification. d. Must have logged at least seventy-five (75) flying hours as an aviation mechanic. 2. Description A silver-plated badge with the pair of wings displayed 7.7 cm in span. A 2.0 cm diameter Philippine Navy Seal in relief, in enameled colors and bordered by rope is set at the center of the wings. 3. Manner of Wearing a. Naval Aviation Badges shall be worn at all times by the specifically authorized officers and enlisted personnel when in uniform. It is worn 0.3 cm centrally above the top seam of the left breast pocket, line of medals, ribbons or any other AFP badge. b. Senior Pilot Rating Badge with a gold plated star supersedes the First Pilot Rating Badge and the Command Pilot Rating Badge with a circular gold plated sampaguita garland placed around the star supersedes the Senior Pilot Rating Badge. Hence, only one naval aviator badge shall be worn at a time. c. Naval personnel who are awarded two or more naval aviation badges shall wear only the badge corresponding to the aeronautical rating he is presently performing.

R E S T R I C T E D

R E S T R I C T E D

185

d. A miniature replica of the naval aviation badge is to be worn on occasions requiring the wearing of the miniature medals and ribbons. The size of miniature replica is four (4) centimeters in span. The height is correspondingly reduced proportionally. 3.4.13 UOG / Seal Team Badge 1. Eligibility a. Must be a regular member of the PN. b. A graduate of the Basic Underwater Operations/Seal Course. c. Must be physically, psychologically and professionally fit to perform diving skills and combat duties. 2. Description The badge is a gold-plated spherical triangle with horizontal base and Silver Star on each side. A pair of silver wings superimposed the triangle at the center and crowned shark rests horizontally on the center of the spread pair of wings. The trident and an M16 are crossed at 90 degrees and superimposed by the shark. 3. Manner of Wearing a. Worn 0.3 cm above the top seam of the left breast pocket or on top of the ribbons (whenever worn) by graduates of Basic Underwater Operations/Seal Course.

b. Worn centered on the flap of the left breast pocket

by recipient of honorary UOG/SEAL TEAM BADGE. 3.4.14 Scuba Diver’s Badge 1. Eligibility a. Must have completed and graduated from the prescribed UOG Scuba Diver’s Course. b. Must be a qualified scuba diver. c. Must be physically, psychologically and professionally fit to perform scuba diving.

R E S T R I C T E D

R E S T R I C T E D

186

2. Description The badge is in the form of a facemask and rubber hood in silver. The double hose regulator connected to the mouthpiece forms a circular pattern at the left and right flanks of the badge. 3. Manner of Wearing a. Worn above the left breast pocket by graduates of UOG/SCUBA DIVER’S BADGE. b. Worn centered on the left pocket flap by recipients of honorary UOG/SCUBA DIVER’S course. 3.4.15 Naval Construction Engineers Badge 3.4.15.1 Naval Construction Company Command Badge 1. Eligibility a. Must have had an aggregate command of the Naval Construction Company for not less than one (1) year including command in acting capacity. b. Must have an accumulated Naval Construction Service of not less than three (3) years. c. Seabees service must be rated “Efficient” and “Honorable”. 2. Description A bronze-plated circular laurel wreath. An anchor is superimposed at the center.

3.4.15.2 Naval Construction Battalion Command Badge

1. Eligibility Must have commanded a Naval Construction Battalion for an accumulated period of not less than six (6) months.

R E S T R I C T E D

R E S T R I C T E D

187

2. Description A circular laurel wreath with an anchor at the center over which a castle is superimposed, all of which is bronze-plated. 3.4.15.3 Naval Construction Brigade Command Badge 1. Eligibility Must have commanded a Naval Construction Brigade for a period of not less than three (3) months. 2. Description A circular laurel wreath with an anchor at the center over which a castle is superimposed, all of which is silver-plated. 3. Manner of Wearing a. The Naval Construction Engineers Command Badge shall be worn by the specifically authorized officers when in uniform. The badge is worn 0.3 cm centrally above the right breast pocket or line of other badges when in actual command. It is worn 0.30 cm centrally above the left breast pocket or line of medals, ribbons, nameplate or any other AFP badges, if no longer in command. b. Only the highest degree of Naval Construction Engineers Command Badge earned may be worn at any one time. 3.4.16 Seabees Badge 1. Eligibility Worn by organic personnel of the Naval Construction Brigade. 2. Description The badge is a disc in bronze consisting of the helm at the center superimposed with a bee pointing a rifle 45 degrees downward to the left while atop a castle. Inscribed at the base of the castle is the word, “SEABEES” and underneath the castle is the year, “1967”. On top of the helm is the word, “PN”. The disc has two concentric rings of ropes and in between is a group of words, “NAVAL CONSTRUCTION BRIGADE”.

R E S T R I C T E D

R E S T R I C T E D

188

3. Manner of Wearing Worn at the center of the left breast pocket. 3.4.17 Philippine Navy Instructor Badges 3.4.17.1 Basic Instructor Badge 1. Eligibility a. Must be in the active naval service and assigned in any of the training units enumerated in para 3b of HPN Circular Number 05 dated 26 April 1994, Subject: Philippine Navy Instructor Badge. b. Must have rendered at least 150 instructional hours with the school or any creditable AFP institutions of learning provided he shall have been assigned with the school for at least three (3) months. c. Must have performed satisfactorily as an instructor. d. Included in the instructors eligibility list to be maintained by the respective schools. 2. Description A copper bronze badge consisting of a fouled anchor 2.20 cm in height with a stock of 0.70 cm in width; an opened hook 1.70 cm in width; an owl 1.50 cm in height and 0.60 cm in width holding a pointer directed upward at the center and perched on the book and two laurel strings link at the bottom, each with a span of 3.60 cm circled on both sides. 3.4.17.2 Senior Instructor Badge 1. Eligibility a. Must be an awardee of the Basic Instructor Badge. b. Must have rendered at least 300 instructional hours.

R E S T R I C T E D

R E S T R I C T E D

189

c. Must have been consistently rated excellent as an instructor. 2. Description The same as the Basic Instructor Badge except that it is colored silver. 3.4.17.3 Command Instructor Badge 1. Eligibility a. Must be an awardee of the Senior Instructor Badge. b. Must have rendered at least 500 instructional hours. c. Must have served as a Course Director to at least one class. d. Must have served in any or a combination of the following positions for a cumulative period of at least one (1) year: School Director; Commander, TDC; Commandant, TG; School Superintendent or higher position at NETC; Superintendent or Director of the school for the other training units. 2. Description The same as the Basic Instructor Badge except that is colored gold.

3.4.17.4 Command Instructor Badge with Star

1. Eligibility a. Must be a Flag/General Officer. b. Must be an awardee of Command Instructor Badge. 2. Description The same as the Command Instructor Badge with the number of stars arranged symmetrically on top of the badge corresponding to the rank of the awardee.

R E S T R I C T E D

R E S T R I C T E D

190

3.4.17.5 Honorary Instructor Badge 1. Eligibility Awarded to any military personnel who has satisfied the following: a. Has served as guest instructor in any of the training units enumerated in para 3b of HPN Circular Number 05 dated 26 April 1994, Subject: Philippine Navy Instructor Badge. b. Has served as resource speaker/lecturer on at least four (4) sessions. c. Has contributed significantly to the faculty or training development. d. Has directly or indirectly contributed significantly to the achievement of naval education. 2. Description The same as the Senior Instructor Badge except that the laurel strings are replaced with chain loop. 3. Manner of Wearing a. The PN Instructor Badge shall be worn on the left breast pocket if the awardee is currently assigned with the school or otherwise performing instructor duty. In all other cases, the badge shall be worn on the right breast pocket; this includes the Instructor Badge (Ad Interim) for instructors and training supervisors who have not yet fully satisfied the eligibility requirements. b. The Honorary Instructor Badge shall be worn centered on the left breast pocket flap for active military personnel in uniform.

R E S T R I C T E D

R E S T R I C T E D

191

3.4.18 Surface Warfare Operations Badge 1. Eligibility a. Officers 1) Must have served sea duty aboard a commissioned vessel of the Philippine Navy, with at least 365 days minimum of level II (Mission Ready) operational status. 2) Must have satisfied a minimum of 1,095 hours Total Steaming Time (TST) or Total Miles Covered (TMC) of 13, 140 NM for Patrol Ships or 8,760 NM for Service and Auxiliary Ships. 3) Must have completed the minimum requirements for Surface Warfare Officer Task Book for minimum skill and experience on Naval Surface Warfare Operations. 4) Must be a qualified watch stander (OOD in port and OOW underway). 5) Must be recommended by his/her ship’s Commanding Officer. b. Enlisted Personnel 1) Must have served a total sea duty of at least eight (8) years aboard a commissioned vessel of the Philippine Navy, with at least 365 days minimum of level II (Mission Ready) operational status. 2) Must have satisfied a minimum of 1,095 hours Total Steaming Time (TST) or Total Miles Covered (TMC) of 13,140 NM for Patrol ships or 8,760 NM for Service and Auxiliary ships. 3) Must be a qualified watch stander (on respective rating, in port and underway). 4) Must have passed Specialization Course (on respective rating). 5) Must have qualified with the minimum requirements for Surface Warfare Enlisted Personnel Task Book for minimum skill and experience on Naval Surface Warfare Operations. 6) Must be recommended by his/her ship’s Commanding Officer.

R E S T R I C T E D

R E S T R I C T E D

192

2. Honorary Surface Warfare Operations Badge a. The honorary PN Surface Warfare Operations Badge maybe awarded to any Commissioned Officer or Enlisted Personnel of the regular force of the Armed Forces of the Philippines who had accomplished extra-ordinary or very exceptional accomplishment in the fields of Doctrines Development and Platform Acquisitions and Designs which had contributed in one way or the other to the betterment of the Surface Warfare Operations of the Philippine Navy provided that his/her accomplishment was properly recognized by the Philippine Fleet. b. The display of the PN Surface Warfare Operations Badge is authorized at all times as part of the uniform and to be worn by any eligible officer and enlisted personnel when in uniform. The badge is worn 0.30 cm centrally above the left breast pocket or line of medals or ribbons. c. The wearing of the miniature replica of the PN Surface Warfare Operations Badge is authorized on occasions requiring the display of the miniature medals or ribbons as part of the uniform. 3. Descriptions A modern warship, with the PN seal super-imposed on the bow, making her way through the ocean as waves form on both sides, with two (2) swords crossed at the back. a. Gold plated for officers with the cross sword symbolizing authority in the naval service. b. Silver plated for enlisted personnel of same design, size and definition as that of officers. c. Wave symbolizes the grace of nature and the danger every sailor must face every time they set sail out into the sea. 3.4.19 Marine Enlisted Personnel Badge 1. Eligibility Must be selected as Marine EP of the Year.

R E S T R I C T E D

R E S T R I C T E D

193

2. Description It is a three-layer silver disc 3.8 cm in diameter. The first layer has two laurels forming a circle. The second layer is the curved rectangular shield. The third layer is the Marine Insignia.

3. Manner of Wearing The badge shall be worn on the right pocket of the uniform. If selected as PN EP of the Year, the Marine EP Badge shall be worn on the left pocket of the uniform. 3.4.20 PN Enlisted Personnel of the Year Badge 1. Eligibility Must be selected as Navy EP of the Year. 2. Description The same as the AFP Enlisted Personnel of the Year Badge. Inscribed on the scroll in Gothic letters, is the phrase: PN Enlisted Personnel of the Year. On top of the scroll is the year of the award. 3. Manner of Wearing The badge shall be worn centered on the right pocket of the uniform. 3.4.21 PN Civilian Personnel of the Year Badge 1. Eligibility Must be selected as PN Civilian Personnel of the Year. 2. Description The same as the AFP Civilian Personnel of the Year Badge but is silver-plated, 1.3 cm in diameter with the inscription, “PN Civilian Personnel of the Year” and the year of the award. 3. Manner of Wearing The badge shall be worn on the left collar for male and shirt breast for female.

R E S T R I C T E D

R E S T R I C T E D

194

3.4.22 PN Civilian Supervisor of the Year Badge 1. Eligibility Must be selected as PN Civilian Supervisor of the Year. 2. Description The same as the AFP Model Supervisor of the Year Badge but is silver-plated. 1.3 cm in diameter with the inscription, “PN Civilian Supervisor of the Year” and the year of the award. 3. Manner of Wearing The badge shall be worn on the left collar for male and left shirt breast for female. 3.4.23 Naval Command Staff Course Badge 1. Eligibility Must be a graduate of Naval Command Staff Course. 2. Description An eagle with widespread wings on top of a circular laurel with an open book at the center all of which are gold-plated and super imposed over a silver sun. Inscribed below the feet of the eagle are the letters “NCSC”. 3. Worn at the center of the right pocket, whenever appropriate, practicable or required. 3.4.24 Naval Command General Staff Course Badge 1. Eligibility Must be a graduate of Naval Command General Staff Course. 2. Description The Navy Seal is superimposed over a silver sun. 3. Worn at the center of the right pocket whenever appropriate, practicable, or required.

R E S T R I C T E D

R E S T R I C T E D

195

3.4.25 Authorized Naval Awards

1. Medal of Valor 2. Distinguished Conduct Star 3. Distinguished Service Star 4. Gold Cross 5. Philippine Legion Of Honor

a. Degree of Chief Commander b. Degree of Commander c. Degree of Officer d. Degree of Legionnaire

6. Outstanding Achievement Medal 7. Gawad Sa Kaunlaran 8. Distinguished Aviation Cross 9. Distinguished Navy Cross 10. Bronze Cross 11. Military Merit Medal 12. Silver Wing Medal 13. Military Commendation Medal 14. Wounded Personnel Medal 15. Military Civic Action Medal 16. Armed Forces Conduct Medal 17. Sagisag Ng Ulirang Kawal 18. Long Service Medal 19. United Nations Service Medal And Ribbon 20. Anti-Dissidence Campaign Medal And Ribbon 21. Luzon Anti-Dissidence Campaign Medal And

Ribbon 22. Visayan Anti-Dissidence Campaign Medal And

Ribbon 23. Mindanao Anti-Dissidence Campaign Medal

And Ribbon 24. Disaster Relief & Rehabilitation Operation

Medal

3.4.26 Awards of Societies and other Organizations

1. UN Medal 2. Medal from Philippine Coast Guard 3. Medal from Friendly Foreign Armed Forces 4. Badges from Foreign Schooling 5. Badges from Friendly Foreign Armed Forces 6. Red Cross Badge

R E S T R I C T E D

R E S T R I C T E D

196

3.4.27 Decorations, Medals, Ribbons, Lapel Buttons worn on Civilian Clothing

Only miniature awards and decorations are authorized

for wear on civilian clothing by active personnel. Policies, procedures and regulation pertaining to wearing of awards and decorations on civilian clothing will be as prescribed in Chapter 8 of this Code. 3.4.27.1 Medals Awarded to AFP Civilian Employees 1. Philippine Legion Of Honor (Degree Of Officer) 2. Philippine Legion Of Honor (Degree Of Legionnaire)

3. Outstanding Achievement Medal 4. Gawad Sa Kaunlaran 5. Bronze Cross 6. Wounded Personnel Medal 7. Military Civic Action Medal

8. Civilian Employee’s Honorary And Incentive Award

a. Distinguished Honor Medal b. Superior Honor Medal c. Civilian Merit Medal

3.4.28 Decorations, Medals, Ribbons, Lapel Buttons worn

by Retired or Inactive AFP Personnel 1. Replicas of decorations, service medals and ribbons in miniature are authorized for wear on Barong Filipino or evening clothes. It shall be one-fourth (1/4) of the actual size of the prescribed medals and ribbons. The wearing of the miniatures on civilian clothes shall be limited to ceremonial occasions only. 2. The upper line of the medals, three (3) in a row are to be placed on top of the left breast in the order of precedence beginning from the top.

3.4.29 Large and Miniature Medals 1. Dimensions and design of large medal shall conform to existing regulations. Miniature medals shall be an exact replica of large medals but one-fourth in size. 2. It shall be worn as prescribed by regulations.

R E S T R I C T E D

R E S T R I C T E D

197

3.4.30 Medal Box 1. Awarded by FOIC, PN to retiring senior officers with the grade of O-6 and above. 2. A rectangular narra box with glass cover, mounted on the upper left corner is the AFP coat of arms. On the upper right corner is the Navy Seal. In between is the 5R size, colored picture of the retiring officer in undress white or PMC equivalent enclosed in a picture frame. Underneath is a brass plate with the rank, name serial number and branch of service. Arranged vertically on the right side are the rank insignias with a brass plate indicating the promotion dates for every rank. The medals are arranged such that the highest award is placed in the left at the upper row. For O-7 and above, every individual medals are displayed. At the bottom are the badges. All of these are mounted on the blue felt paper for white caps officers and red felt paper for marine officers.

3.4.31 Wearing of Large Medals 1. Decorations, service medals and ribbons are worn on the uniform above the left breast pocket in rows of three. Line of medals is about 10 cm below the middle point on the top of the shoulder, the highest award shall be to the right in the upper row, the lowest in the lower row to the wearer’s left. All ribbons that are multi-colored shall be worn such that the blue colors are placed towards the wearer’s right. 2. Multiple rows of ribbons should be grouped with the same number of medals in each row, with the lesser number in the top row if necessary. A maximum of three medals may be worn side by side in a single row with no overlap. Arrange four or more medals (maximum of five in a single row). Overlapping shall be proportional and the inboard medal shall show in full. Mount the medals so they cover the suspension ribbons of the medals below. 3. Arrange medals in order of precedence in rows from top down, inboard to outboard, within rows.

3.4.32 Wearing of Miniature Medals 1. Replicas of decorations, service medals and ribbons in miniature authorized for wear on mess jacket, Barong Filipino or evening clothes, shall be one-fourth (1/4) of the actual size of the prescribed medals and ribbons. The wearing of miniature on civilian clothes shall be limited to ceremonial occasions only.

R E S T R I C T E D

R E S T R I C T E D

198

2. Each row of miniatures is 7.0 cm long, from top of the suspension ribbons to bottom of medals, so the bottom of medals dress in a horizontal line. Position medals so they cover the suspension ribbons of the medals in the rows below. 3. Wear up to five miniature medals in a row with no overlap. Arrange medals in order of precedence in rows from top down, inboard to outboard, within rows.

3.4.33 Wearing of Badges Badges not exceeding three may be worn at all times on the uniform. The occupational specialty badge is worn above the left breast or above the line of medals and ribbons. The eligibility badge is worn centered on the left breast pocket and the highest educational badge on the right breast pocket as appropriate.

3.4.34 Wearing of Ribbons 1. The ribbon is worn in lieu of an authorized decoration and service (campaign) medal. One ribbon for each decoration or medal is authorized. 2. An appurtenance is added or attached to the ribbon to distinguish each deed and succeeding deeds of achievements falling under the same category of the decoration. 3.5 UNIFORM FOR RESERVISTS 3.5.1 Retired and Reserve Officers Retired and reserve officers (inactive) may wear the prescribed uniform on the following occasions:

1. Military ceremonies. 2. Formal gatherings of military character.

3. When engaged in the military instruction of cadet corps,

school teachers or similar organizations.

4. When responsible for the military discipline at an educational institution.

R E S T R I C T E D

R E S T R I C T E D

199

5. As instructors in the Citizens’ Military Training in high schools during the period they are actually holding classes or conducting military instruction. 6. When visiting at military camp, post or station including aboard commercial for the purpose of participating in military drills or exercises or when assembled thereat for the purposes of instruction. 3.5.2 Naval ROTC Students enrolled in Basic Naval ROTC shall provide for their own uniform. The prescribed uniform for the incoming 1st year Basic Naval ROTC midshipmen shall be fatigue uniform with combat boots and oversea cap while midshipmen taking Naval Science (NS) 21 or NS 22 and those taking the Special Program shall be allowed to wear their Major Service GOU uniform. 3.6 CARE AND MARKINGS OF UNIFORMS

3.6.1 Care The longest service of the various uniform articles can be attained only by proper care and maintenance. This information is presented to help prolong the useful life and distinguished appearance of uniforms and equipment. Even new, properly fitted uniforms will not continue to look their best or keep their shape unless proper care is given. Carrying large or heavy objects in pockets will quickly destroy the shape of the best uniform. Uniforms should be stored in hangers. If uniforms are to be stored for a long time, they should be cleaned thoroughly, then packed in an airtight plastic bag with a packet of desiccant for maximum preservation. 3.6.2 Markings A marking on the uniforms is necessary to prevent losses or unintentional use by other personnel. Normally, markings are made on the inner side of the uniforms such that t-shirt’s marks are made under the lowest inner portion while that of the pants are made on the inner waist part. Markings should be placed so as to make it hidden when normally worn. The markings should follow this form: LAST NAME AND INITIALS: BIDAN DB Rank: CAPT

R E S T R I C T E D

R E S T R I C T E D

200

3.6.3 Marking of Individual Clothing and Equipment Articles of individual clothing and equipment must be legibly marked in accordance with the above, using black marking fluid in marking white and khaki material and white marking fluid in marking blue, green and black material. All markings shall be made with 1.3 cm letters (all capital) and numbers (in block style) using stencil whenever available. Whether the word “right” or “left” means when wearing the garment, on towels, beddings, etc., it means the owner’s “right” or “left” when standing behind the articles laid out for inspection, will appear up right to the inspecting officer.

R E S T R I C T E D

R E S T R I C T E D

201

CHAPTER 4

AIR FORCE UNIFORMS

“The military uniform is a distinct symbol of the military organization. It shows the state of discipline of an organization by the way its personnel carry themselves when they are in uniform.” 4.1 GENERAL GUIDELINES 4.1.1 Policy The military uniform is a distinct symbol of the military organization. It shows the state of discipline of an organization by the way its personnel carry themselves when they are in uniform. The men who were given the privilege to wear the uniform have the duty and responsibility to wear it with dignity and glamour to attain the respect that it deserves. The uniform must be worn accordingly as to reflect credit upon it and the organization it represents. 4.1.2 Purpose The Philippine Air Force prescribes this Uniform Code to require all military personnel to adhere strictly to uniform regulations. This Uniform Code prescribes the different types of uniform for PAF military personnel in and out of the Command. It also prescribes the different types of uniform to be worn for the various duties and functions of the Air Force.

R E S T R I C T E D

R E S T R I C T E D

202

4.1.3 Responsibility All Air Force personnel are responsible for the strict adherence to this Code. They are required to have the complete sets of uniforms with the necessary accoutrements, decorations, and accessories prescribed for each type of uniform. 4.1.4 Philippine Air Force Uniform Board Composition:

Executive Officer, AC of AS, A-1 Chairman Executive Officer, AC of AS, A-3 Member Chief, Historical Affairs Member Executive Officer, AC of AS, A-4 Member Executive Officer, AC of AS, A-6 Member Assistant AFIG Member Executive Officer, AFPM Member Assistant Air Adjutant Member Command Sergeant Major Member Chief, Board Secretariat Recorder

4.2 OFFICIAL AND AUTHORIZED UNIFORMS 4.2.1 Formal Dress Uniforms The Formal Dress Uniforms are the standard uniforms of the Air Force personnel for formal, semi-formal and informal functions and occasions. They include the following:

1. Evening Dress Uniform or the Mess Jacket 2. Dress White or the White Duck 3. Dress Blue 4. PAF Service Bush Coat

4.2.1.1 Mess Jacket Uniform (AFMJU) – is composed of the Air Force black jacket, black high waist trousers, white pleated dress shirt, black bow tie, cummerbund (sash). Female officers shall wear the white jacket. 1. Materials a. Jacket – Fabric 100% polyester gabardine, black/white color. b. Trousers – Commercial, black, tuxedo type of light materials.

R E S T R I C T E D

R E S T R I C T E D

203

2. Jacket, Evening Dress a. Design – The jacket shall be made from an approved specification or pattern. b. General Description – The jacket, which is cut on the lines of an evening dress coat, descends to the point of the hips and is slightly curved to a peak in the back and in front. Two AFP regulation brass button, joined by a small gold or gold color chain about 4 cm long may be worn in the upper buttonholes. The shoulders are provided with a means of attaching shoulder board. c. Jacket Sleeve Ornamentation – The cuff of sleeves have black/silver mercerized cotton braid, 1.5 cm wide, sewn on each sleeve, with the lower edge parallel to and 7.5 cm above the bottom edge of each sleeve. 3. Trouser, Black a. Design – The trouser shall be made from an approved specification or pattern. b. General Description – The black trousers shall be cut along the lines of civilian dress trousers with a high waist, without pleats, cuffs, and hip pocket. c. Trouser Leg – The trouser leg will be straight to the bottom without pleats on waist. d. The female skirt is of the same color and material as that of the male trouser. The skirt is ankle length, pencil cut with no flare from hip to seam. At the back is an overlapping slit 38 to 46 cm. 4. Cummerbund, Black a. Design – The cummerbund shall be made from a commercial design made of silk or satin material with four pleats running the entire length of the cummerbund. b. Wear – All officers are to wear the black cummerbund with the Air Force evening dress / mess jacket uniform. The cummerbund shall be of the same material as the bow tie/crescent moon. It shall be worn with pleats facing upward.

R E S T R I C T E D

R E S T R I C T E D

204

5. Shirts, White Dress A commercial white long sleeve pleated dress shirt with a soft bosom, French cuffs, and standard turndown collar shall be worn with Air Force mess jacket uniform. 6. Headgear – The Air Force Service Pershing Cap or Air Force Blue Felt Cap for female officers. 7. Shoulder Board The shoulder board shall be the same as that worn on the Air Force Dress White or White Duck. 8. Occasions for Wear Formal evening mess or socials whose civilian equivalent is the coat and tie. 4.2.1.2 White Duck Uniform (AFWDU) – is composed of Air Force white coat and trousers and white shirt and black necktie / crescent moon tie. 1. Materials a. Coat and Trousers. The materials for this uniform is gabardine, 100% polyester, white. b. Headgear, Wool felt, Blue Shade. c. Shoulder Board, Blue, Metal Rank Insignia. 2. Coat, Air Force White Duck a. Design – The coat shall be made from an approved specification or pattern. The coat for female officers shall follow the standard design of uniform for women prescribed in this Code. b. General Description – The white coat is a single breasted peaked lapel, four (4) button coat as per regulation extending below the crotch, fitting easily over the chest and shoulders with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and no prominent flare.

R E S T R I C T E D

R E S T R I C T E D

205

c. Coat Sleeve Ornamentation – The sleeve shall have a band of white mercerized cotton braid, 1.5 cm wide. Sewn on each sleeve, with the lower edge parallel to and 7.5 cm above the bottom edge of the sleeve. 3. Trousers, Air Force White Duck a. Design – The trousers or skirts shall be made from an approved specification or pattern. b. General Description – The trousers are straight legged without cuffs, and white side and hip pockets cut in civilian style. Trousers made from 100% polyester should be lined. There shall be no ornamentation on the Air Force white trousers. c. Skirt for female is of matching shade and material as the coat. It is knee length, and should fit snugly around the waist and hips. It has secret side pockets and with overlapping back slit and back zipper closure. 4. Shirt, White A commercial long sleeve white shirt with barrel or French cuff and standard turn down collar shall be worn. 5. Service Cap, Air Force White Duck The service or Pershing cap is the prescribed headgear for the Service White. For female officers, the blue felt cap shall be worn. a. Design – The service cap shall be made from an approved specification or pattern. b. General Description – The cap shall be made of a standard Air Force service blue cap design. c. Visor and Ornamentation – The visor shall be of plain black leather. The visor ornamentation is as follows: 1) General and Field Grade Officer – The top of the visor shall be black cloth with two arcs of laurel leaves in group of two, embroidered in gold bullion or synthetic metallic gold colored in 24 karat gold color.

R E S T R I C T E D

R E S T R I C T E D

206

2) Company Grade Officers – The top of the visor shall be of plain black cordovan or cordovan finish leather, resin treated, with a waterproof edge. d. Chinstrap and Chinstrap Ornamentation – The chin strap shall be two strap, each 1.3 cm in width by 25 cm in length, with one end of each strap forming a slide and the other end of each strap fastened to the cap at each end of the visor. The chinstrap shall be covered with gold wire lace, or synthetic metallic gold colored lace, or one-piece strap manufacture from anodized aluminum 24-karat gold color. e. Hatband – Hatband shall be of black nylon braid, 4.4 cm in width, around the entire outside rim of the cap. f. Wear – The Air Force White Service Blue/Felt cap shall be worn by all officers with the Air Force White Duck, Air Force Service Blouse, Air Force Bush Coat, and smart General Office Uniform. 6. Occasions for Wear

a. Weddings b. Principal/Host during Send

Off/Arrival for President/VP. c. New Year’s Call d. Oath-Taking e. Awardees f. AFP Day g. Pallbearers 4.2.1.3 Service Blouse 1. Composition Air Force Service Blouse is composed of coat and trouser, and blue long sleeve and a blue four-in-hand-necktie / crescent tie. 2. Materials Coat and Trouser – the fabric for coat and trousers shall be gabardine, twill weave, 100% polyester blue.

R E S T R I C T E D

R E S T R I C T E D

207

3. Coat, Service Blouse a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The coat shall be single-breasted, peak-lapel, four (4) AFP Regulation buttons, coat extending below the crotch, fitting easily over the chest and shoulder, with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and with no prominent flare. c. Coat Sleeve Ornamentation 1) Officers – The sleeve shall have a band of blue mercerized cotton braid, 2 cm wide, sewn on each sleeve with the lower edge parallel to and 7.5 cm above the bottom edge of each sleeve. 2) Enlisted Personnel – The sleeve shall have a chevron and service stripes. 4. Trouser Service Blouse a. Design – the trouser and skirts shall be made from an approved specification or pattern. b. General Description – The trouser shall be pleated straight legged, without cuffs and with side and hip pockets. The female skirt is of matching color and material as that of the blouse, of same design as that of the Dress White Skirt. 5. Headgear - The service Pershing cap shall be made from an approved specification or pattern. 6. Blue Felt Cap for female. 7. Occasion for Wear a. Major Service Anniversary

b. Witnessing Honors for President/VP c. Courtesy Calls to the President/VP

New Year’s Call at GHQ/DND

R E S T R I C T E D

R E S T R I C T E D

208

4.2.1.4 Bush Coat The PAF Service Bush Coat is the standard uniform of officers and Sergeant Majors of the Command for informal functions or occasions of less formal nature. 1. Materials a. Coat and Trouser – The fabric for coat and trousers shall be gabardine, twill weave, 100% polyester blue. b. Air Force Blue Shirt – The fabric shall be twill weave, 100% polyester. 2. Bush Coat a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The coat is single-breasted, midsection button is hidden with built-in-belt, and sleeves side pressed fitting easily over the chest and shoulder with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and with no prominent flare. 3. Trousers, Bush Coat a. Design – The trouser or skirts shall be made from an approved specification or pattern. b. General Description – The trouser shall be straight legged, without cuffs and with side and hip pockets. c. The skirt is of same material as the coat. The design shall be that of standard female cut and shape for the service white or dress white. 4. Service Cap Bush Coat, (Blue) wool Pershing cap. The Pershing cap is the prescribed headgear for the PAF Service Bush Coat. For female officers, Blue Felt cap will be worn. The oversea or garrison cap shall be worn with the uniform when abroad. 5. Occasion for Wear a. Parades and review, other than to celebrate AFP and Major Service anniversaries.

R E S T R I C T E D

R E S T R I C T E D

209

b. Graduation and Commencement Exercises of established AFP educational/training institution, except for the graduating students who will wear formal uniforms. c. Within the premises of Malacañang Palace, the Senate, the House of Representatives and Courts of Law, unless other uniforms are specially prescribed. d. Indoor ceremonies inside military camps/bases and ceremonies outside military camps when the Senate President, Speaker of the House, Chief Justice of the Supreme Court, or the Secretary of National Defense is the Guest of Honor/Speaker. e. Informal reception or social functions hosted by Cabinet Secretaries, Senators, Congressman or foreign dignitaries/officials. f. When attending informal receptions or social functions on board naval vessels, or PM-hosted functions where the Navy Undress White is the prescribed uniform. g. When designated as escort officer/Aide-de-Camp/Liaison Officer (Officer-in-Attendance) to foreign dignitaries on official visit to the Philippines, unless another uniform or attire is prescribed. h. When hosting or witnessing military arrival and departure honors for dignitaries lower than the President or Vice President. i. Funerals and interments, except for pallbearers.

4.2.1.5 General Office Uniform (GOU)

The Casual Dress Uniform, known as the General Office Uniform (GOU), is the standard military uniform for general office works and day-to-day routine activities of the Command. On the other hand, during special occasions and functions, Smart General Office Uniform (SGOU) is worn with all the decorations and accoutrements. Pershing Cap is the prescribed headgear for SGOU worn during flag raising/retreat ceremonies, reporting to board interviews and other occasions as prescribed by higher authorities. GOU is also worn with only the basic accouterments (Nameplate and Specialty Badge) and without the display of decorations and honorary badges, except the occupational specialty insignia, which shall be placed atop the left breast pocket, eligibility badge at the center of the left

R E S T R I C T E D

R E S T R I C T E D

210

pocket and the highest military education whenever appropriate shall be placed on the right center pocket of all military uniform. Nameplate is placed at the flap of the right pocket between the top seam and the button. Female military personnel, in addition to the skirt, are also prescribed with the trousers for use when traveling or attending formation duties.

1. Composition GOU Blue Uniform is composed of blue trousers / skirts and blue shirt short sleeve.

2. Materials a. Shirt, GOU Blue – The fabric shall be twill weave, 100% polyester blue shade.

b. Trousers / Skirts – The fabrics shall be gabardine, twill weave, 100% polyester dark blue. 3. Design a. Trouser 1) Design – the trouser shall be made from an approved specification or pattern. 2) General Description – The trouser shall be straight legged, without cuffs and with pleats below the waist. 3) Skirt – the female skirt is of matching material and color with the shirt, the same as that of the male trouser. The skirt is knee length and should fit snugly around the waist and hips. It has secret side pockets and with overlapping back slit and back zipper closure. b. Shirt, GOU – The shirt is a dress type with shoulder strap (for officers), six buttons, front and two pleated pockets with button down flaps, and short sleeve. The shirt has a convertible collar and may be worn with or without a blue four-in-hand necktie. Enlisted personnel shirt shall have no shoulder strap. c. The female shirt shall follow the standard cuts and shapes required on the female uniform. The material and fabric is the same at that of the male shirt.

R E S T R I C T E D

R E S T R I C T E D

211

4. Occasions for Wear a. The GOU blue is acceptable as semi-formal uniform and can be used during social functions as prescribed by the host. b. GOU Blue is a duty uniform or general office uniform for garrison or installation. c. Cold weather GOU (Long Sleeved Version) – Standard uniform during and in cold weather and when on schooling abroad. Basic accoutrements are needed. d. Tactical GOU – It is worn during tactical ceremonies and parade duties, trousers tucked-in- with the combat boots as footwear and the blue beret as the headgear. 5. The overseas cap is the prescribed headgear for both male and female personnel of the command when in GOU. a. Design – The oversea cap shall be made from an approved specification or pattern. The service cap may be worn as prescribed by the commanders. Materials: Officers – wool felt, blue color. Enlisted Personnel – same as the coat or trouser material. b. Ornamental braid – Garrison/Oversea braid refers to the piping used for additional identification purposes that is sewed to the tip edge of the curtain of the garrison/oversea cap. 1) Officers – The cap shall have a cord edge braid of gold bullion or synthetic metallic gold yarn with black rayon or black polyester intertwined. 2) Enlisted Personnel – The cap shall have a cord edge braid of the same material as the cap. 6. Enlisted personnel of the Command, not designated as Sergeant Majors, shall wear the Smart GOU in lieu of the PAF Service Bush during informal occasions.

R E S T R I C T E D

R E S T R I C T E D

212

7. Pregnant female officers and enlisted women are allowed to wear maternity uniform (loose fitting top shirt) for their GOU with the proper accoutrements. 4.2.2 Battle Dress Uniform (BDU) The prescribed Battle Dress Uniform (BDU) is the standard combat, tactical and practical training uniform for both male and female military personnel of the Air Force. The camouflage cap is the standard headgear for the Battle Dress Uniform. The cap shall contain the service seal and the rank insignia centered on the front part of the cap. The wearing of the Air Force beret for the BDU shall be prescribed as necessary by the Commander.

1. Composition Composed of camouflage coat, trousers and camouflage cap. 2. Material a. The fabric is 100% cotton, rip stop, in a four-color woodland camouflage pattern. b. Coat Camouflage Pattern – The coat is a single breasted “bush type” design with a black yoke, collar, four patches below type pockets with flaps (two upper and two lower). The coat has a straight cut bottom, waist take-up tabs on both sides, and cuffed sleeves with reinforcement patches at the elbows. c. Trousers, Camouflage Pattern – The trousers contain four standard type pockets. Reinforcement patches have been added at knees and buttocks. The trousers have adjustable straps at waist and leg hem draw cords.

Air Force Service Seal Placement

Rank Insignia Placement

BDU Camouflage Cap

R E S T R I C T E D

R E S T R I C T E D

213

d. The camouflage cap 100% cotton is the authorize headgear for BDU Uniform. The beret will be as prescribed by commanders. 3. Occasions for Wear BDU is the standard combat, tactical and practical training uniform worn for maximum cover and concealment; field formation uniform for drills and ceremonies and training exercises; disaster relief and rescue and security/operations; for guarding duties, red alert conditions and during weekends and holidays; parades and ceremonies. 4.2.2.1 Camouflage Short with Combat Boots

1. Enlisted personnel are also prescribed with the use of camouflaged-pattern short pants and worn with the camouflaged pattern tee shirt. The enlisted personnel, in lieu of the camouflaged trousers, can wear this uniform when performing fatigue duties when prescribed by the Commanders. Other tactical field activities like road runs with rifles, physical training, CMO activities, and other command related activities may require the wearing of this uniform. 2. The camouflaged patrol cap is the prescribed headgear. The camouflaged athletic uniform is worn during field calisthenics. 4.2.3 Flight Duty Uniform (FDU) 1. The Flight Duty Uniform is the one-piece, olive drab flying suit coverall used by military personnel of the Air Force while engaged in flight, line, and aircraft and vehicle maintenance supervision duties. Personnel assigned/engaged in Search and Rescue Units/operations may wear FDU in tangerine or orange. 2. It is worn with the flying/combat boots or high-ankle shoes as footwear. The Flight Duty Uniform can be worn as the office uniform only when about to go or just immediately coming from flight, flight line or aircraft and vehicle maintenance duties. It may also be worn by officers of the Air Force as substitute for the BDU during alert conditions, as guard details, and on weekends and holidays when required to report for duty. 3. The Oversea Cap is the prescribed headgear for the Flight Duty Uniform. The Oversea Cap should not be kept in pockets so as to maintain its proper appearance and form.

R E S T R I C T E D

R E S T R I C T E D

214

4. One piece, olive drab flying suit coverall used by military personnel engaged in flight line, aircraft and vehicle maintenance duties. This can be worn in place of BDU during red alert conditions as guard details and on weekends and holidays. 5. The Wing/Group patch will be sewn above the right pocket while the squadron patch will be sewn on the right sleeve 5 cm inches from the pencil pocket. 6. The national flag will only be displayed on the upper right sleeve of the FDU over the pencil pocket when on foreign mission or engaged in combined exercises with armed forces of other nations. 4.2.4 Maintenance Duty Uniform The maintenance duty uniform is a one-piece coverall used by maintenance duty personnel in performance of their flight line maintenance duty. The round neck undergarment t-shirt is the same as that prescribed in the BDU. It should be worn with the combat boots or the high ankle safety shoes. 4.2.5 Physical Fitness or Athletic Uniform The Athletic Uniform is the standard uniform for military personnel of the Command when engaged in controlled athletics and physical fitness activities. It is also the prescribed uniform during declared athletic periods. It consists of the PAF regulation blue short pant with white tee shirt with collar for officers, and collarless white round neck tee shirt for enlisted personnel. The shirt is tucked-in to the pants. 1. Composition a. White T-shirt (with Air Force marking) with collar for officers and without collar for enlisted personnel. b. Blue short pants. c. Dominant white rubber shoes. 2. Occasions for Wear It is the standard uniform for military personnel in controlled athletics and physical fitness activities.

R E S T R I C T E D

R E S T R I C T E D

215

4.2.6 Military Police Uniform (MPU) The MPU is composed of coat, trousers (BDU) and white service (Pershing Cap or White Helmet). 1. The type of uniforms authorized for Military Police personnel are Class C2 (GOU Blue) and Class D (BDU). 2. Description of MP accessories: a. White Sam Brown belt with complete accessories b. White letter “MP” c. Police nightstick d. Whistle, brass with brass chain e. White Lanyard f. MP strip white service (Pershing Cap) OD g. White helmet liner with letters “MP” h. Beret i. Combat Boots with white shoelace tucked-in 3. The articles listed above are authorized for wear with Class C type and Class D uniforms by MP personnel while performing MP duties. When wearing combat boots with service uniform trousers, the trousers will be tucked-in. 4. Occasions for Wear The Military Police (MP) uniform is authorized for year-round wear on police duty by all personnel assigned with the Military Police Unit. 4.2.7 Air Force Blue Gala Uniform (AFBGU) 1. Composition Composed of blue coat, white trousers, service blouse with Pershing cap (Blue Felt Cap for female personnel) and white gloves.

R E S T R I C T E D

R E S T R I C T E D

216

2. Materials a. Coat – Gabardine, twill weave, blue 100% polyester. b. Trousers – Gabardine, twill weave, white 100% polyester. 3. Coat, Gala Blue a. Design – The coat shall be made from an approved specification or pattern. b. General Description – The coat shall be single-breasted, peak-lapel, stand-up collar, and five-button coat extending below crotch and neck, fitting easily over the chest and shoulders with a slight draped effect in front and back. The coat shall be fitted slightly at the waist conforming to the figure without tightness and no prominent flare. c. Shoulder Aiguillette – Officers and enlisted personnel shall attach the aiguillette on the shoulder seam of the gala blue coat depending on the position in which aiguillette is worn as prescribed in Chapter 1. d. Coat and Sleeve Ornamentation – Ornamentation or band shall be worn on both sleeves of the gala blue. The band shall measure 8.5 cm in width and 16 cm in length. Silver color nylon or rayon braid is authorized for officers and enlisted personnel. The band on the neck and the coat sleeve shall be the same material. The bottom of the sleeve band shall be positioned parallel to and 6 cm above the bottom of each sleeve. 1) Officers – The band shall have arcs of laurel leaves in group around the edge of the band, 2.5 cm in width embroidered gold or synthetic metallic silver color braid. 2) Enlisted Personnel – The band shall be plain silver color nylon or rayon with embroidered Air Force Service Insignia. e. Coat Neck Ornamentation – Ornamentation band shall be worn on both edge tip of stand-up collar of Gala Blue. The band shall measure 4 cm in width and 9 cm in length. The band shall be placed parallel to the tip of the collar.

R E S T R I C T E D

R E S T R I C T E D

217

4. Trousers, Gala Blue a. Design – The trousers shall be made from an approved specification or pattern. b. General Description – The trouser shall be straight legged without cuffs and with hip pocket. The hip has a buttonhole tab and button. c. Trouser Leg Ornamentation – Braid silver shall be sewn on each outside seam of the trouser leg from the bottom of the waistband to the bottom of the trouser leg as follows: 1) Officers – Each trouser leg shall have two 1 cm wide silver gold mercerized cotton or satin braid sewn 1 cm apart. 2) Enlisted Personnel – Each leg shall have one 1 cm silver mercerized cotton braid. 5. Service Cap, Gala Blue Design: a. Officers – The service cap shall be of a standard Air Force design in accordance with approved specification or pattern. b. Enlisted Personnel – Material shall be made of the material listed for coat, Air Force Blue. The chinstrap shall be of plain black leather matching the visor in appearance with rounded ends. The top of the visor shall be of plain black or cordovan finish leather with a waterproof edge. Cap insignia shall be worn on the service cap, secured through the front eyelet provided thereon. 6. Security and Honor Escort AFBGU is the authorized and official uniform of the Security and Honor Escorts of the Philippine Air Force while attending or performing ceremonial activities i.e. parade and honor. 4.2.8. Fatigue Duty Uniform

The Fatigue Duty Uniform is always worn with olive drab, green round t-shirt as undergarment tucked-in to the pants. The pants secured to the waist by a PAF-regulation blue belt and stainless buckle. When a Fatigue Duty Uniform is worn without the prescribed camouflaged-pattern coat,

R E S T R I C T E D

R E S T R I C T E D

218

leaving the green undershirt tucked-in to the camouflaged pants, it is configured into the Fatigue Duty Uniform for enlisted personnel of the Air Education and Training Command. The Fatigue Duty Uniform is worn for fatigue duties in other related field works. It is also worn for technical shop and aircraft and vehicle maintenance duties. The camouflaged cap is the prescribed headgear. 4.2.9 Black Coverall Used and worn by EOD personnel while conducting paneling of the area to be used by VIPs. 4.2.10 Motorcycle Rider Uniform Used in escorting the President of the Philippines, other VIPs and foreign dignitaries visiting the country.

4.2.11 Bikers’ Uniform

Used in enforcing traffic/patrol inside the base and four way stops. It shall consist of: 1. Blue long sleeve sweatshirt with ABW Logo and Military Police lettering printed at the back. 2. Blue short pants or blue long pants with gold long sleeve. 3. White rubber shoes with white socks. 4. Helmet. 4.2.12 Task Force Tulay Uniform

Used in enforcing traffic control at Villamor-Fort Bonifacio Interchange and other areas inside camp as directed. The use of the following uniform/paraphernalia is authorized: 1. Black sweatshirt with yellow marking Military Police “TF TULAY”. 2. Black/Camouflage pants with combat boots tucked-in. 3. Black ball cap, black pistol belt.

R E S T R I C T E D

R E S T R I C T E D

219

4. Traffic Violation Receipt (TVR) is always carried during their tour of duty. 4.3 AUTHORIZED ITEMS ON UNIFORMS 4.3.1 Mess Jacket 1. Shoulder Board 2. Miniature Medals / Awards 4.3.2 White Duck 1. Shoulder Board 2. Coat of Arms 3. Eligibility Badge 4. Military Badges 5. Military Awards and Decorations 6. Nameplate 4.3.3 Service Blouse 1. Metal Rank Insignia 2. Coat of Arms 3. Eligibility Badges 4. Military Badges 5. Military Awards and Decorations 6. Nameplate 4.3.4 Bush Coat 1. Metal Rank Insignia 2. Coat of Arms 3. Eligibility (AFOS) Insignia 4. Military Badges 5. Military Awards and Decorations 6. Nameplate 4.3.5 General Office Uniform (GOU) 1. Metal Rank Insignia for officer 2. Eligibility AFOS Insignia 3. Military Badges 4. Military Awards and Decorations 5. Nameplate

R E S T R I C T E D

R E S T R I C T E D

220

For White Duck, Air Force GOU Blue, Bush Coat, Air Force Gala and Military Police uniforms, the nameplate shall be made of plastic with white borderline 77 mm in length and 20 mm in width with 8 mm lettering in black background. Ribbons shall be made of silk moiré fabric and worn above the left breast pocket in rows of three. Shoulder board with metal rank insignia shall be worn except for Bush Coat and GOA Blue Uniforms. 4.3.6 Battle Dress Uniform (BDU) 4.3.6.1 Officers 1. Service patch 2. Unit patch 3. Service cloth / tape 4. Name cloth / tape 5. Military badges 4.3.6.2 Enlisted Personnel 1. Eligibility 2. Service patch 3. Unit Patch 4. Air Force strip or service cloth 5. Name cloth / tape 6. Military Badges 7. Coat of Arms 8. Chevron rank insignia 4.3.7 Athletic Uniform 1. Camouflage T-shirt/shorts pants, jogging pants 2. Dominant white rubber shoes and white socks 4.3.8 Military Police Uniform 1. Rank shoulder loop (Officer)/Chevron rank insignia (EP) 2. Military ribbon and badges 3. Nameplate 4. MP strip 5. Lanyard white (Officer)/Lanyard blue (EP) – shall be placed on the right shoulder extending under the armpit 6. White Sam Brown belt with complete accessories 7. Holster with pistol 8. Collar insignia (EP) 9. Brassard (EP) – shall be placed on the left shoulder

R E S T R I C T E D

R E S T R I C T E D

221

10. Police nightstick, white 11. Brass whistle 4.3.9 Air Force Gala Blue 1. Shoulder board with rank insignia (Officer) 2. Miniature medal 3. Black Sam Brown belt (Officer), white belt with buckle (EP) 4. Air Force Seal 5. Nameplate 6. White Gloves 7. Aiguillette 8. Unit seal 4.3.10 Headgears and Caps 4.3. 10.1 Mess Jacket 1. Blue wool Pershing Cap (Male) 2. Blue Felt Cap with AFP coat of arms (female) 4.3. 10.2 White Duck 1. Blue wool Pershing Cap (Male) 2. Blue Felt Cap with AFP coat of arms (female) 4.3. 10.3 Service Blouse 1. Blue Wool Pershing Cap (Male) 2. Blue Felt Cap with AFP coat of arms (female) 4.3. 10.4 Bush Coat

1. Blue Wool Pershing Cap (male) 3. Blue Felt Cap (Female)

4.3. 10.5 Air Force Gala Uniform 1. Air Force Pershing Cap (male) 2. Blue Felt Cap with AFP coat of arms (female)

R E S T R I C T E D

R E S T R I C T E D

222

4.3.10.6 General Office Uniform 1. Oversea / Garrison Cap as the standard headgear. 2. Service / Blue Felt Cap as prescribed by commanders 4.3. 10.7 Battle Dress Uniform 1. Utility Camouflage Cap 2. Beret as prescribed 4.3.11 Footwear 4.3.11.1 Mess Jacket – Shoes, Dress, Low Cut, Clarino with Regulation socks. Pump shoes with hose for female. 4.3.11.2 White Duck – Shoes, Dress, Low Cut, Clarino with Regulation socks. Pump shoes with hose for female. 4.3.11.3 Service Blouse – Shoes, Dress, Low Cut, Clarino with Regulation socks. Pump shoes with hose for female. 4.3.11.4 Bush Coat – Shoes, Dress, Low Cut, Clarino with regulation socks. Pump shoes with hose for female. 4.3.11.5 GOU for Officers and EP 1. Shoes, Dress, Low Cut, regulation socks. Pump shoes for female personnel. 2. Boots, Combat, Field Use for MP, with white shoelace, tucked-in-pants. 4.3.11.6 Air Force Gala Uniform – Shoes, Dress, Low Cut, Clarino with Regulation socks. Pump shoes with hose for female. 4.3.11.7 Battle Dress Uniform (BDU) 1. Boots, Combat, Field Use, tuck-in with regulation socks. 2. Boots, Combat, Field Use with white shoelace (MP Unit).

R E S T R I C T E D

R E S T R I C T E D

223

4.3.12 Belts and Buckles 4.3.12.1 Air Force Evening Dress or Mess Jacket Black satin sash with pleats facing upward. 4.3.12.2 Air Force White Duck Stainless buckle with Air Force logo and blue web garrison belt. 4.3.12.3 Air Force Service Blouse Stainless buckle with Air Force logo and blue web garrison belt. 4.3.12.4 Air Force Bush Coat Stainless buckle with Air Force logo and blue web garrison belt. 4.3.12.5 General Office Uniform (GOU) 1. Stainless buckle with Air Force Logo and blue web garrison belt. 2. Pistol Belt, White with holster for Military Police. 4.3.12.6 Battle Dress Uniform (BDU) 1. Pistol Belt – when an officer carries his pistol. 2. Suspender Belt – when things are being supported (i.e. Pistol, Ammo, etc.). 3. Garrison Web Belt Olive Drab (OD) and stainless buckle with Air Force Logo. 4. Sam Brown Belt, White for MP. 5. Pistol Belt, White with Holster for Military Police. 4.3.12.7 Air Force Gala Uniform 1. Garrison web belt, blue and stainless buckle with PAF Logo. 2. Sam Brown Belt, Black, Officer

R E S T R I C T E D

R E S T R I C T E D

224

3. White belt, silver buckle with PAF seal (EP). 4.3.12.8 Athletic Uniform As prescribed by commanders. 4.4 INSIGNIA AND AWARDS 4.4.1 Ranks 4.4.1.1 Mess Jacket Shoulder boards with metal rank insignia shall be placed on both shoulders. Miniature decorations are used. 4.4.1.2 White Duck A shoulder board with rank insignia shall be placed on both shoulders of the uniform. AFP Coat of Arms shall be placed on both side of upper collar lapel. 4.4.1.3 Service Blouse A metal rank insignia shall be placed on both shoulder straps of the uniform. AFP Coat of Arms shall be placed on both sides of upper collar lapel while eligibility (AFOS) insignia shall be at the lower lapel. 4.4.1.4 Bush Coat 1. For officer, metal rank insignia shall be placed on both shoulder strap of the uniform and the occupational specialty badge shall be above the left pocket. 2. For enlisted personnel (Command Sergeant Major/Asst Command Sergeant Major), metal rank insignia shall be placed on both shoulder strap of the uniform and Coat of Arms on both collars. 4.4.1.5 GOU Blue 1. For officers, rank insignia with shoulder loop shall be placed on both shoulders of the uniform. The eligibility (AFOS) insignia shall be placed at the center of the left breast pocket.

R E S T R I C T E D

R E S T R I C T E D

225

2. For enlisted personnel, rank chevrons shall be placed on both shoulder sleeves of the uniform. 4.4.1.6 Battle Dress Uniform (BDU) 1. For officer, cloth rank insignia shall be placed on both collars. 2. For enlisted personnel, cloth rank chevrons shall be placed on both collars. 4.4.1.7 Rating/Specialization Insignia such as highest professional military education attained shall be placed on the right center pocket on the military uniform as appropriate or required. Ratings or skills acquired shall be placed on the left pocket or above the topmost ribbon as prescribed in this Code.

4.4.2 Awards 4.4.2.1 Authorized Air Force Awards 1. Medal of Valor (MOV) 2. Distinguished Conduct Star (DCS) 3. Distinguished Service Star (DSS) 4. Gold Cross Medal (GCM) 5. Philippine Legion of Honor (PLOH) a. Degree of Chief Commander b. Degree of Commander c. Degree of Officer

d. Degree of Legionnaire 6. Outstanding Achievement Medal (OAM) 7. Gawad Sa Kaunlaran (GSK) 8. Distinguished Aviation Cross (DAC) 9. Bronze Cross Medal (BCM)

10. Military Merit Medal (MMM) 11. Silver Wing Medal (SWM) 12. Military Commendation Medal (MCM) 13. Wounded Personnel Medal (WPM) 14. Military Civic Action Medal (MCAM) 15. AFP Conduct Medal (AFPCM) 16. Sagisag ng Ulirang Kawal (SUK)

R E S T R I C T E D

R E S T R I C T E D

226

4.4.3 Wearing of Large Medals Medals may be worn on the formal military uniform or

the service uniform, but shall not be worn together with their corresponding ribbons.

1. These decorations, however, may be worn on

uniforms during occasions as follows: a. On state occasions, local or abroad. b. When receiving or calling or acting as

escort to the President of the Republic of the Philippines. c. In all official and social functions at

Malacañang, when attending other ceremonies and social functions elsewhere given for secretaries of different departments or ranking officers of the AFP and other foreign friendly countries.

2. Commanding Officers may prescribe the wearing of decorations on the following occasions.

a. Parades, reviews and inspection. b. Ceremonial and social occasions. c. Regular duty when the general office

uniform is worn. 3. These decorations may also be worn at the option

of the wearer on the above occasions unless not prescribed and prohibited on the following circumstances:

a. Holiday, when not on duty with troops. b. Social occasions of a private nature. 4. These decorations shall not be worn on the

following: a. On service shirt, overcoat as when

equipped for combat or simulated combat. b. Officers suspended from Command or

facing Court Martial or Efficiency Separation Board.

R E S T R I C T E D

R E S T R I C T E D

227

c. Enlisted personnel serving sentence or confinement.

d. When wearing civilian clothing, except for

civilian decorations. 4.4.4 Wearing of Miniature Medals

1. Wearing of miniature medals on civilian clothes should be limited to ceremonial occasions only. 2. Miniature medals may be worn on mess jacket, Barong Filipino and evening clothes and shall be one-fourth (1/4) of the actual size of the prescribed medals and ribbons. 4.5 UNIFORM FOR RESERVIST and ROTC CADETS 4.5.1 Designated Uniforms for Reservist 4.5.1.1 Battle Dress Uniform 1. Battle Dress Uniform (BDU) for Reserve Force must be the same as the BDU used by the Regular Force. 2. The headgear shall be the same as that used by the officers and enlisted of the Regular Force, which is woodland camouflage patrol cap. 3. A reservist seal with rank insignia is attached on the left front portion of the beret for officer and plain Air Force reservist seal for enlisted personnel. 4. The reserve unit seal shall be attached on the center of the left breast pocket. 5. The reservist seal shall be attached on the center of the right breast pocket. 6. Air Force seal on the right shoulder sleeve. 7. ARC Seal on the left shoulder sleeve. 4.5.1.2 General Office Uniform (GOU) 1. GOU will be the same as that of the uniform worn by the regular troops.

R E S T R I C T E D

R E S T R I C T E D

228

2. The reservist seal (metal) shall be pinned on the center of right pocket. 3. The reserve unit seal shall be pinned on the center of the left pocket. 4. The shoulder board for officer reservist shall have the same color as that used by the regular force officers. 4.5.2 Items on Uniforms 1. Type A – Cotton twill blue coat and trouser.

2. Aeronautical and Chaplain Badges are mandatory and others are optional. Center Aeronautical, operational specialty badge is 0.3 cm above first one. Such items should be highly polished at all times. 4.6 RESTRICTIONS WHEN ON UNIFORM The wearing of Air Force uniforms is prohibited on the following events or occasions. 1. In connection with the furtherance of any political or commercial interest or when engaged in off-duty. 2. When participating in public speeches, interviews, picket lines, marches, rallies, or public demonstration, except as authorized by competent authority. 3. When attending any meeting or event that is a function of or is sponsored by an extremist organization. 4. When wearing the uniform, walking outdoor/driving military vehicle, smoking is strictly prohibited. 4.7 INDIVIDUAL CLOTHING AND EQUIPMENT In addition to uniforms, Air Force personnel are issued clothing and equipment for their use throughout their military career. It is every Air Force personnel’s responsibility to see that such issues are in good hands, ready, and serviceable. Air Force personnel are also issued individual equipment comprising other items that one needs to perform his duty as airmen and as a soldier. These issued items are on memorandum receipt issued by their units and are recovered or exchanged as necessary. Some major items of individual

R E S T R I C T E D

R E S T R I C T E D

229

equipment are back pack, bayonet, magazine pouches, mess gear, cartridge belt, canteen and cup, poncho, first aid packet, shelter half, cover, and others. Air Force personnel’s responsibility is the same as that of those for their clothing. It is a matter of constant supervision and inspection. Therefore, every airman should exercise the desired standard of maintenance according to prescribed regulations on such issues and that carelessness and negligence toward these issued articles will reduce the effectiveness and efficiency of his unit. Articles issued to Air Force personnel are itemized in Chapter 7 of this Code. 4.8 CARE AND MARKINGS OF UNIFORMS 4.8.1 Care Care of the uniforms in the Air Force is essentially an individual responsibility and concern. Since basic training, Air Force personnel are taught the proper handling of issued sets of uniforms in order to prolong the uniforms lifespan and preserve its presentable appearance and promote smartness and pride in the organization that it represents. Such care includes the proper cleaning, washing or laundering of specific uniforms and other items of uniforms. The maintenance should be prepared in such a way as to prevent fading and unnecessary break-up of the fabric. Another consideration is the proper hanging and storage of the uniforms; selected spaces should be chosen to prevent insects from damaging uniforms. Proper ironing should be in the proper level of temperature to avoid overheating which could lead to impairment of parts of the uniform. Further guidelines in the care of uniform are provided for in chapter 9 of this Code. 4.8.2 Markings A marking of the uniforms is necessary to prevent losses or unintentional use by other personnel. Normally, markings are made on the inner side of the uniforms such that t-shirt’s marks are made under the lowest inner portion while that of the pants are made on the inner waist part. Markings should be placed so as to make it hidden when normally worn. The markings should follow this form: LAST NAME AND INITIALS: RAMIREZ AG Rank COL

R E S T R I C T E D

R E S T R I C T E D

230

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

231

CHAPTER 5

TECHNICAL AND ADMINISTRATIVE SERVICES UNIFORMS

5.1 GENERAL POLICY The Technical and Administrative Services were created with a specific mission of providing administrative and service support to the Armed Forces. The Technical and Administrative Services long and colorful history is attributed to those who significantly constituted and served the service with quality, competence, loyalty, discipline and professionalism. The same distinguishing attribute is evident in today’s organization not only in their performances and achievements but also through their everyday appearances. The officers of present Technical and Administrative Services are therefore encouraged to maintain uniformity and strong sense of identity and pride as members of the AFP by adhering to common uniform regulations prescribed and to strictly observed and implement such regulations with pride and respect. All Technical and Administrative Service officers shall wear their distinct and required uniform and rank insignia of their respective services in the same way military personnel of the three major services do. Military personnel detailed from one service to another shall wear the uniform and rank insignia pertaining to their basic service. This also applies to all personnel on DS status.

“The Technical and Administrative Services long and colorful history is attributed to those who constituted the service and served with quality, competence, loyalty, discipline and professionalism”.

R E S T R I C T E D

R E S T R I C T E D

232

5.2 DESIGNATED UNIFORMS AND OCCASIONS FOR THEIR WEAR 5.2.1 Formal Dress Uniform 5.2.1.1 Evening Dress Uniform (Mess Jacket) 1. Also known as Black and White uniform, the mess jacket is the standard formal evening uniform for the Technical and Administrative Service officers of the AFP. Male officers shall wear the black jacket while the female officers shall wear the white jacket blouse. 2. Occasions for Wear – This is worn during formal military evening dinners, receptions and balls and such other functions that call for the wearing of the mess jacket, equivalent to the civilian formal coat and tie attire. 3. Description – It is a three-piece ensemble consisting of a black / white coat jacket, a black long pants/ankle length skirt, and white inner long sleeves shirt/blouse. a. Jacket – The shade is black/white made of 55% polyester and 45% tropical wool, fully lined, straight back, single breasted with 6 big AFP brass buttons attached on both sides, and 2 small AFP brass buttons connected to a 5 cm chain for front closure. b. Trouser – The trouser is in deep black shade of matching material with the jacket. It is high-waist without pockets. The bottom of the male trousers’ legs rests on the front of the shoes with a slight break in creases. The back of the trousers legs is extended to approximately 1.27 cm longer than the front. c. Shirt 1) For male personnel, the shirt is long sleeves, trubenized-style, conventional clear white soft dress with standing turn down collar and French cuffs. It is front-pleated with open edge of pleats facing inward. The front opening is secured with black rounded buttons. 2) For female personnel, the inner blouse is the same as for the male, except that the pleats are replaced by 3 rows of ruffles with gold trimming at the edge. The buttons at the center are rounded black buttons.

R E S T R I C T E D

R E S T R I C T E D

233

3) Approximately 0.6 cm of the cuffs protrudes from the sleeves of the jacket when the hand hangs naturally on the side. The shirt is tucked-in to the skirts. d. Skirt – The skirt is of deep black shade of matching material with the jacket. The skirt is ankle length, pencil cut with no flare from hip to hem. The over lapping slit at the back should measure from 38 to 46 cm. e. Head Gear – Pershing Cap for male and Black Felt Cap for female. f. Tie – For female personnel, a black satin crescent neckband is attached under the front collar of the inner shirt. For male, deep black, silk satin, pre-tied bow tie. g. Cummerbund – A sash 12.7 cm wide, in deep yellow, satin shade, pleated without design for female officers and black sash for male officers. It is worn with open edge of pleats facing upward, and joined by a hook at the back. h. Footwear – The male personnel use the low quarter black dress shoes. For female personnel, the shoes are of tapered heel not more than 7.62 cm and not less than 5.10 cm in height in black shade, light gloss leather and skin tone nylon hosiery. i. Bag – Plain black patent leather clutch bag. j. Accoutrements: 1) Shoulder boards with rank insignias. 2) Miniature service specialty rating or service command badge. 3) Miniature medals worn centered on the left lapel with the top of the holding bar at the lapel’s widest part. 4) Deep yellow, satin, pleated cummerbund in an upward position.

R E S T R I C T E D

R E S T R I C T E D

234

5.2.1.2 Dress White 1. Known as the White Duck, is a formal daytime uniform for all officers. 2. Occasions for Wear – It is worn during formal daytime military receptions and weddings, formal calls, ceremonies, during daytime state functions and formal affairs, and when serving as pallbearers during interments and or necrological services. 3. Descriptions – It is a three-piece ensemble consisting of a white single-breasted coat, a white long pants or pencil-cut knee-length skirt and white long sleeves inner shirt or blouse. a. Coat – The coat is of traditional tailored design with collar and lapel. It is made of clear white 55% polyester and 45% tropical wool material. The coat for females is single-breasted and conforms to the contour of the body but allows ease of movement. It has 2 hanging lower pockets without flaps and with arms hanging naturally, the sleeves end approximately 1.27 cm from the heel of the thumb. The coat is fully lined, with white sleeve braid, 1.27 cm wide for company grade officers and 1.9 cm wide for field grade officers. The length of the coat is proportionate to the height. b. Trousers – The trousers is of matching shade and material with the coat. The trouser for males is full-cut, straight hanging, with two side and back pockets and belt loops, cuff less and without pleats. The two back pockets are covered with flaps. The bottom front of trousers legs rests on top of the shoe with a slight break in the creases. The bottom front of trousers’ legs rests on the front of the shoe with a slight break in the creases. The bottom front of trousers’ legs extends approximately 1.27 cm longer than the front. c. Skirt – The skirt is of matching shade and material as the coat. It is knee-length, and should fit snugly but not tightly around the waist and hips. It has secret side pockets and with overlapping back slit and back closed by zipper. d. Shirt – The shirt is clear white, plain woven, commercial trubenized-type and secured with small transparent plastic buttons. It has short pointed standing, turndown collar without button. When hanging naturally, approximately 0.6 cm of the cuffs of the sleeves protrude from the sleeves of the coat. The shirt is tucked-in to the pants/skirt. e. Head Gear – Pershing cap for male personnel and Black Felt Cap for female personnel.

R E S T R I C T E D

R E S T R I C T E D

235

f. Tie – The tie for female personnel is black satin crescent neckband with 5.1 cm width attached under the front collar of the shirt. The tie for male personnel is black satin and plain woven. It is a 4-hand tie without decoration and when worn, should hang naturally from the neck collar down to the waist. It is secured to the shirt with an AFP regulation cravat clasp. g. Footwear – The male personnel use the low quarter black dress shoes. For female personnel, the shoes is of tapered heel not more than 7.62 cm and not less than 5.1 cm in height in black shade, light gloss leather and skin tone nylon hosiery. h. Bag – Plain black patent leather bag. i. Accoutrements: 1) Shoulder boards with rank insignias. 2) AFP Coat of Arms 3) Awards and Decorations 4) Service and special badges 5) Flight Badge 6) Nameplate 7) Highest military schooling badge 5.2.1.3 Technical Service Blouse 1. The standard semi-formal day and evening uniform for all Technical Service officers. 2. Occasions for Wear – it is worn during semi-formal day and night military functions and receptions, and on parades and reviews in honor of retiring Generals and higher ranks. It is also worn during the AFP and Major Service anniversaries and in other traditional military ceremonies, which honor or have as principal guests as the President and Vice President or Heads of States or government of other countries.

R E S T R I C T E D

R E S T R I C T E D

236

3. Description – It is a three-piece ensemble consisting of a dark-gray single-breasted coat, a dark-gray pants/pencil cut knee-length skirt and an inner off-white long sleeves shirt/blouse. A black crescent neckband is attached under the front collar of the inner blouse for female and black tie for the male. a. Coat – The coat is of traditional tailored design, made of dark gray 55% polyester and 45% tropical wool. The coat is single-breasted tailored design, with no breast pockets, and conforms to the contour of the body but allows ease of movement. It is also closed with 4 large gilded brass AFP buttons and has 2 hanging pockets without flaps. With arm hanging naturally on the side, the sleeves will end approximately 0.6 cm from the heel of the thumb. The coat is fully lined, with black sleeve braid 1.27 cm wide for company grade officers and 1.9 cm wide for field grade officers. The length of the coat is proportionate to the height. b. Trousers and skirt – The trouser and skirt for the Technical and Administrative Service Blouse are of matching shades and material with the coat. The design and cut of the trouser and skirt are the same as prescribed for the Dress White. There is, however, a 0.30 cm black stripping along the outer seams of the trousers and the skirt of the Technical Service Uniform. c. Shirt – The shirt for the Technical Service Blouse is of the same design and material as prescribed for the Dress White but shade is off white. d. Head Gear – Pershing Cap for male personnel and Black Felt Cap for female personnel. However, for foreign schooling, traveling purposes and other special occasions as prescribed, the oversea cap is the standard headgear for male and female personnel. e. Tie – The tie for female personnel is black satin crescent neckband with 5.1 cm width attached under the front collar of the shirt. The tie for male personnel is black satin and plain woven. It is a 4-hand tie without decoration and when worn, should hang naturally from the neck collar down to the waist. It is secured to the shirt with an AFP regulation cravat clasp. f. Footwear – The male use the low quarter black dress shoes. For female, the pump shoes is of tapered heel not more than 7.62 cm in height in black shade, light gloss leather and skin tone nylon hosiery.

R E S T R I C T E D

R E S T R I C T E D

237

g. Accoutrements: 1) Metal rank insignias fastened on shoulder strap 2) AFP Coat of Arms 3) Awards and Decorations 4) Service and specialty badges 5) Flight badge 6) Nameplate 7) Highest military schooling badge 5.2.1.4 Bush Coat 1. Same as prescribed by higher headquarters except that the color is dark gray and that female officers wear skirt with 2.54 cm black cloth piping at the sides and overlapping slit is prescribed. 2. Occasions for Wear – Use in lieu of semi-formal dress on as prescribed. 3. Description: a. Head Gear – Pershing cap for male and Black Felt Cap for female. b. Footwear – The male use the low quarter black dress shoes. For female, the pump shoes is of tapered heel not more than 7.62 and not less than 5.1 cm in height in black shade, light gloss leather and skin tone nylon hosiery. c. Accoutrements: 1) Metal rank insignias on the shoulder strap 2) Awards and Decorations 3) Service and Specialty badges

R E S T R I C T E D

R E S T R I C T E D

238

4) Flight badge 5) Nameplate 6) Highest military schooling badge 5.2.2 Casual Dress Uniforms 5.2.2.1 General Office Uniform (GOU) 1. The GOU is the standard military uniform for general office work and day-to-day duties and activities. It is worn only with the basic accoutrements and without the display of decorations and honorary badges on the shirt. 2. Occasions for Wear – It is worn on occasions and functions of casual nature. 3. Description – It consists of a two-piece ensemble made of an off white short sleeves polyester and dark gray tropical wool long pants/skirt. a. Trousers – a full-cut, straight hanging, coffles and without pleats. It has 0.31 cm black stripping along outer seams. The bottom front of the trousers legs rest on the top of the shoe with a slight break in the creases. The back of the trousers legs extends approximately 1.27 cm longer than the bottom front. b. Skirt – The shirt is knee-length, which fits snugly, but not tightly around the waist and the hips. It is one-piece semi-pencil cut, with overlapping back slit and the back closed by zipper. There is a 0.31 cm black stripping along the outer seams of the skirt. c. Shirt – The male shirt is short sleeve of 55% polyester and 45% cotton material and off-white shade. The shirt is of commercial type, short sleeves, with standing turndown collar secured in front by six 1.27 cm round transparent 2 holed plastic buttons. It has shoulder straps and two breast pockets with flaps secured by matching plastic buttons. It is tucked-in to the pants when worn. d. Blouse – The female blouse is of same material and shade as the male shirt. It has a round collar and short sleeves and five (5) round off-white plastic buttons to close the front opening.

R E S T R I C T E D

R E S T R I C T E D

239

It has shoulder straps secured by matching plastic buttons. It has no pockets, with level bottom and worn under the skirt. e. Headgear – Oversea Cap. Pershing and Black Felt Cap are as prescribed. f. Belt and Buckle – The black web belt is worn along the waistline over the shirt. The insignia/logo for respective Technical and Administrative Services should be embossed on the silver buckle front surface. g. Footwear – The male use the low quarter black dress shoes. For female, the shoes is of tapered heel not more than 7.62 cm in height and not less than 5.1 cm in height, in black shade, light gloss leather and skin tone nylon hosiery. h. Bag – Plain black patent leather bag. i. Accoutrements: 1) Shoulder loop 2) Service and specialty badges 3) Flight badge 4) Nameplate 5) Badges

6) Awards and decorations (as prescribed) 5.2.2.2 Office/Hospital Maternity Uniform 1. This is another modification of the office uniform and shall be worn by female members who are pregnant while on duty in office. 2. Occasions for Wear – use during maternity period when the use of standard uniforms is deemed inappropriate. 3. Description: a. Blouse – Off-white polyester 55% and tropical wool 45%. Round collar and short sleeves with horizontal cut both front and back. Front has 2.54 cm two way pleats meeting at the center

R E S T R I C T E D

R E S T R I C T E D

240

each on both sides and another one at the center of the back. The length is up to the end of the torso. b. Skirt – Dark gray semi-pencil cut, with 20 cm overlapping slit at the back. Front upper portion is replaced by a stretchable dark gray cotton cloth. c. Paraphernalia and accessories are the same as that on the General Office Uniform. 5.2.2.3 Cold Weather Uniform 1. The cold weather uniform is the long sleeve version of the General Office Uniform. 2. Occasions for Wear – It is worn with the prescribed regulation necktie. Cold weather uniform is worn in cold areas, particularly when on schooling or assigned in cold weather countries. 3. Description: a. Shirt – The shirt is long sleeve, with French cuff, off shade, as prescribed for the shirt of the General Office Uniform, made of 55% polyester and 45% tropical wool. It is of commercial type, trubenized style with standing turn down and shoulder strap and secured in front by small transparent plastic buttons. It has two breast pockets with flaps and closed by matching plastic buttons. The female personnel wear the same shirt material as that of the male personnel. The shirt is tucked-in to the pants or the skirt. b. Trousers and skirts – The same as prescribed for the GOA. c. Headgear – Oversea cap is the prescribed headgear, when worn with basic accoutrement while Pershing cap for males and Black Felt Cap for female personnel when worn with complete accoutrements and as prescribed. d. Tie – The tie for female personnel is black crescent neckband with 5.1 cm width attached under the front collar of the shirt. The tie for male personnel is black satin and plain woven. It is a 4-hand tie without decoration and when worn, should hang naturally from the neck collar down to the waist. It is secured to the shirt with an AFP regulation cravat clasp.

R E S T R I C T E D

R E S T R I C T E D

241

e. Belt and Buckle – The same as prescribed for the GOU. f. Footwear –The same as prescribed for the GOU. 5.2.2.4 Cold Weather Jacket 1. Black tailored and patterned using the same materials of the Major Service jacket. It has flat cuffs with two snapped buttons. 2. Occasions for Wear – When assigned in places requiring the use of additional clothing such as during colder weather seasons and while in regions of colder climate. 5.2.3 Functional Dress Uniform 5.2.3.1 Battle Dress Uniform (BDU) 1. The BDU shall be the standard combat uniform for both male and female military personnel of the Technical and Administrative Services. 2. Occasions for Wear – It is normally worn for maximum concealment in hostile environment. It is also worn as a field formation uniform for practiced drills and ceremonies and field training exercises. It is also the standard uniform in disaster relief, search and rescue operations and on red alert status. 3. The Battle Dress Uniform consists of the following: a. Trousers – The rip-stop trouser is made of 100% cotton fabric in woodland camouflage pattern. It is full-cut, straight hanging and cuff less. Aside from the normal seam pockets and 2 back pockets with flaps, the trouser has also 2 patch pockets secured with flaps below the seam pockets. The trouser has belt loops. When worn, the lowest part of the trunks must be secured with a garter on top of the upper edge of the combat boots. b. Shirt – The shirt is of the same material and camouflaged pattern as the trousers. It is long-sleeved, single breasted, with 2 breast patch pockets and 2 bottom patch pockets, all covered with flaps. It has a straight cut bottom sleeve tabs, and side body panels with take-up tabs. It may be worn with rolled-up sleeves during

R E S T R I C T E D

R E S T R I C T E D

242

ordinary occasions or unrolled sleeves when situations require protection. The patch of respective Technical Service is sewn on the left upper arm sleeve. The name cloth shall be secured above the right breast pocket. c. Headgear – The camouflage cap with cloth rank insignia sewn centered on the front of the cap. d. Belt and Buckle – The olive drab web belt is worn along the waistline over the shirt. The respective Technical and Administrative Service insignia/logo shall be embossed on the silver buckle front surface. e. Footwear – The tropical combat boots with black upper canvas and black woolen socks shall be worn. 5.2.3.2 Flight Duty Uniform 1. Standard uniform of Technical Service officers on flying status as flight nurse/surgeon shall be the Flight Duty Uniform (FDU). 2. Occasions for Wear – The Flight Duty Uniform is worn by flight surgeons and flight nurses while engaged in flight duties performing aero medical evacuation functions and during flight alert days. Flight wings, name and rank will be printed on plain black leather patch and shall be attached above the right breast pocket. 3. Description – Men’s lightweight; polyamide; sage green, AF shade 1565; fire resistant, slide fastener body closure at center front; two slide fastener closures extending below the knee to the bottom of cuffs; with half belt; one bellows pocket with slide fastener closure at left sleeve, one patch with two pencil compartments superimposed on bellows pocket; one patch knife pocket with flap and snap fastener closure at inner left thigh, six patch pockets with slide fastener, closures at left and right breast, left and right thighs and outer left and right; bi-swing back with half belt and waist band with elastic webbing and hook and pile tape fasteners; slide fastener pass-through opening below the waist on back of trousers beside left and right leg seams; with protective front fly; with sleeves adjusted with hook and pile tape fasteners; with static electricity reducing feature; set in sleeves with wrist and cuff straps; without ankle straps; without suspenders. a. Headgear – oversea/garrison cap. b. Footwear – the tropical combat boots with black upper canvas and black woolen socks.

R E S T R I C T E D

R E S T R I C T E D

243

5.2.3.3 Hospital Duty White Uniform (For Nurses) 1. There are two (2) types of Duty White Uniform for Nurses; one for male nurses, and the other for female nurses. 2. Occasions for Wear – The Nurse’s Duty White Uniform is the standard uniform for nurses while on hospital duties. 3. Description: a. Shirt – The shirt is of clear white shade, made of 55% polyester and 45% cotton, with quarter length sleeves and open collar. It has one left breast slit pocket and 2 lower patch pockets. The bottom is level, and the shirt is worn outside the trousers. b. Trousers – The trousers for male nurses is the same as prescribed for the General Office Uniform. c. One-piece Dress – One Piece-Dress is prescribed for female nurses. It is made of 55% polyester and 45% clean white cotton, one-piece material, open from neckline to hem and overlapping towards the left. The upper half of the uniform has shoulder yoke with 5 cm pleats on each side. It is closed with 3 large white plastic buttons, equally spaced, and detachable 5 cm waistband, buttons set 12.5 cm apart. The collar is tailored notched lapel with pointed corners, while the sleeves are short with pointed cuffs and fastened with small white round plastic back-to-back buttons equally spaced. The slit pockets are set diagonally on both sides of skirts panels. d. Headgear – White nightingale cap for females. There is no prescribed headgear for male nurses when wearing the uniform. e. Footwear – The male nurses shall wear the low quarter black dress shoes and plain black cotton socks. Female nurses shall wear white-laced soft leather shoes, plain rounded toe without perforations and decorations; white nylon hosiery. 5.2.3.4 Dental Service Clinical Uniform 1. The clinical uniform shall be 80% cotton for comfort, 20% polyester for durability and stiffness. 2. The uniform is worn during routine clinical operations with GOU pants and authorized white round neck T-Shirt. During civic action activities, the BDU trouser is worn with the prescribed undershirt.

R E S T R I C T E D

R E S T R I C T E D

244

a. The color is Aquamarine, which has soothing and comforting effect for the eyes. Aesthetically the color conforms well in surrounding including a cooling blend in the area. It is worn as short sleeves with collar and secured in front with zipper. A horizontal pocket slit is made at the upper right breast pocket. Side slits is made at the lower sides of the uniform for easy access with pocket pants. The metal rank insignia is placed at the right collar while on the left collar is the Dental Service Branch insignia. b. Trousers – is the same as prescribed for the GOU and BDU. 5.2.4 Athletic Uniform 5.2.4.1 Physical Fitness Uniform 1. General use for athletics as prescribed. 2. Occasions for Wear – Use when engaged in athletic activities. 3. Description: a. Shirt – Plain white short sleeves with sports collar. b. Shorts – Plain white mid thigh in length. c. Footwear – White rubber shoes and white socks. 5.2.4.2 Sports Competitions Uniform – As prescribed by commanders. 5.3 UNIFORM ITEMS 5.3.1 Headgears The headgear prescribed for officers are the Pershing cap, oversea/garrison cap and camouflage patrol cap for males; and the Black Felt Cap, oversea/garrison cap, camouflaged patrol cap and white nightingale cap for females.

R E S T R I C T E D

R E S T R I C T E D

245

5.3.2 Pershing Cap

The cap is a black visor-type, the crown in matching shade and material. It has a braid of open mesh construction chinstrap running on top of the visor and connected to the side, together with the black plastic back strap, by 2 small gild buttons. The mesh-constructed braid and the gild buttons are of brass shade. The AFP coat of arms is placed at the front-center of the crown. For Pershing cap of field grade officers (Major to Colonel), the visor and side strap is adorned with gold shaded laurel bullion. 5.3.3 Black Felt Cap The Black Felt Cap is the counterpart of the Pershing cap for female military personnel. It is made of black felt material and rounded crown with rolled sides forming a front brim. For black felt cap of field grade officers (Major to Colonel), the visor and side strap is adorned with gold shaded laurel bullion. 5.3.4 Gray Oversea/Garrison Cap The Gray Oversea/Garrison Cap is made of 55% polyester and 45% tropical wool in matching service color with the brass AFP Coat of Arms pinned on the left front side and the miniature metal rank on the right front side. 5.3.5 Camouflaged Cap

It shall be the same as that issued with the Battle Dress Uniform and normally worn when using the said uniform or as prescribed by the commander. 5.3.6 White Nightingale Cap

Secured at the back by three small white plastic back-to-back buttons and used when on duty in hospitals. 5.3.7 Raincoat The raincoat is made of black waterproof, polyvinyl nylon, loose fitting with bottom coat extending to between kneecap and midcap, and the sleeves extending to the base forefinger. It is 6-button double-breasted with matching belt and plastic clip buckle, button throat closure and shoulder and sleeve strap.

R E S T R I C T E D

R E S T R I C T E D

246

5.3.8 Umbrella It shall be plain black for all military personnel. For male military personnel, it is only authorized during rainy days. 5.3.9 Sweater It shall be plain white for hospital duty uniform. 5.3.10 Handbags Both the clutch bag and shoulder bag are prescribed for female officers only. 1. Clutch Bag – It is plain black leather clutch bag. It measures 25.4 cm long, 14 cm wide, and 5.08 cm thick. 2. Shoulder Bag – It is plain black made either of calfskin or kid leather, with fold over flap and plain fastener. It measures 25.4 cm long, 17.5 cm wide and 6.4 cm thick. It is provided with 2.5 cm width adjustable strap. 5.3.11 Nameplate The standard nameplate on the military uniform is as prescribed in chapter 1of this Code. For hospital duty uniform, the surname in black letters is 1 cm embroidered on white cloth measuring 8.3 cm long, and 2 cm wide background, and is sewn above the right breast pocket. 5.3.12 Grade/Rank Insignia For hospital duty uniform, it shall be embroidered on white cloth background and sewn on the right collar; both male and female NC officers shall wear each as prescribed in this Code. For flight nurses, the grade/rank insignia shall be sewn on both left and right collar, the same as that of the Air Force officers. 5.3.13 Nurse Corps Caduceus For hospital duty uniform, it shall be embroidered on white cloth background and sewn on the left collar. For flight nurses, the embroidered flight badge shall be sewn above the name cloth.

R E S T R I C T E D

R E S T R I C T E D

247

5.3.14 Earrings The standard material and size of earring to be worn with all types of female uniforms are made of pearl and must only be 0.6-0.7 cm in diameter. 5.3.15 Awards and Decorations Military personnel shall wear their medals and ribbons as prescribed in this Code. 5.3.16 Protective Equipment and Clothing Military personnel are authorized to wear protective or reflective items (vest, jackets, armbands, or other occupations health or safety equipment) with the uniform when safety or health consideration makes it appropriate. 5.4 INSIGNIA AND AWARDS

Being part of the military organization, it is inherent that officers of the Technical and Administrative Services are likewise awarded with the same medals and other decorations awarded to the Major Services. The standard rank insignia is the same as that worn by the Army, Air Force and the Marines and follows the same patterns and procedures when wearing the insignia. Such wearing of awards is as prescribed in this Code.

Military awards shall be as prescribed in Chapter 8 of this Code. 5.5 ORGANIZATIONAL CLOTHING AND EQUIPMENT The Technical and Administrative Services are generally provided with the organizational clothing and equipment in the same way the Army, the Air Force and the Navy do. Technical and Administrative Service officers are likewise charged of taking care of their issued organizational clothing and equipment to ensure that government issues are in operational status. It shall be as prescribed in Chapter 7 of this Code. 5.6 CARE AND MARKING OF UNIFORMS

5.6.1 Care Care of the uniforms in the Technical and Administrative Services is particularly an individual responsibility and concern. Since basic training, Technical and Administrative Services personnel are taught of the

R E S T R I C T E D

R E S T R I C T E D

248

proper handling of issued sets of uniforms’ in order to prolong the uniforms lifespan and preserve its presentable appearance and promote smartness and pride in the organization that it represents. Furthermore, extending the life of uniforms would mean saving enough money for other purposes. Such care includes the proper cleaning; washing or laundering of specific uniforms and other items of uniforms should be prepared in such a way as to prevent fading and unnecessary break-up of the fabric. Another consideration is the proper hanging and storage of the uniforms; selected spaces should be chosen to prevent insects from damaging uniforms. Proper ironing should be in the level of temperature to avoid overheating which could lead to impairment of parts of the uniform.

Further guidelines in the care of uniforms are prescribed in Chapter 9 of this Code. 5.6.2 Markings A marking of the uniforms is necessary for identifying individual’s property and belongings. This will prevent losses or unintentional use by other personnel. Normally, marking are made on the inner side of the uniforms such that t-shirt’s marks are made under the lowest inner portion while that of the pants are made on the inner waist part. Markings should be placed so as to make it hidden when normally worn. The markings should follow this form: LAST NAME AND INITIALS: YUTADCO EL Rank COL

R E S T R I C T E D

R E S T R I C T E D

249

CHAPTER 6

SELECTED AFP WIDE SERVICE SUPPORT UNITS UNIFORMS

“Well-dressed soldiers are usually well-behaved soldiers.” 6.1 General Policies This chapter discusses the different uniforms being utilized by all AFP Wide Service Support Units (AFPWSSUs) more particularly that of the members of the Cadet Corps Armed Forces of the Philippines (CCAFP, PMA), the General Headquarters and Headquarters Service Command, Armed Forces of the Philippines (GHQ & HSC, AFP), and Presidential Security Group (PSG). The PSG and GHQ and HSC, AFP, being part of the AFPWSSUs whose personnel components are generated from among the Major Services, do on all occasions and instances use the basic uniforms being implemented by their respective Major Services. Thus, whether in social, administrative and operational, garrison or field duty functions, the equivalent uniforms in each Major Services are applied for by military personnel. However, peculiar ceremonial uniforms are used when rendering honors to both local and foreign dignitaries and when forming part of parades and ceremonies in honor of both active and retiring General and Flag Officers, the Commander-in-Chief, AFP and local and foreign dignitaries. On the part of the Cadet Corps Armed Forces of the Philippines, however, several sets of uniforms are issued and used in order to suit the occasions and conform to its desired functions as required. These sets of uniforms of the CCAFP are prescribed in the furtherance of the Philippine Military Academy’s mission. A thorough discussion for the AFPWSSUs uniforms will be discussed on the following sub-chapters as specified in this Code.

R E S T R I C T E D

R E S T R I C T E D

250

5. For the CCAFP, at any time from reveille to taps, cadets are required to be in their prescribed uniforms. The manner that cadets wear and carry their uniform is one attribute that distinguishes them from among others. The pride and dignity discerned from the cadets while in uniforms are clearly evident and could never be overlooked. For cadets, the uniform is not just pieces of garments and mere clothing. Profoundly, the uniform more accurately symbolizes the rich traditions and the lofty ideals and principles espoused by their most cherished institution – the Philippine Military Academy. 6.1.1 Purpose The purpose of this chapter is to serve as a guide and set a standard procedure on the peculiar uniforms used by selected AFPWSSUs more particularly that of the CCAFP, PSG, and GHQ & HSC, AFP. 6.1.2 Objectives 1. To standardized the uniforms used by all AFPWSSUs. 2. To provide a thorough appreciation and guide on the uniforms used by AFPWSSUs. 3. To provide distinction on the uniforms used by AFPWSSUs. 6.2 CADET CORPS ARMED FORCES OF THE PHILIPPINES (CCAFP-PMA) 6.2.1 Brief History The evolution of PMA from the Philippine Constabulary Academy in 1905 up to its present name as the Philippine Military Academy in 1936 has undoubtedly brought with it the transformation of the various uniforms of the cadets. Pre-war cadet uniforms were similar to the field and garrison uniforms prescribed for officers except that cadet non-commissioned officers and privates did not wear the Sam Brown belt when in field uniform. When in garrison, they wore in their uniform belts without the cross strap. Woolen puttees were worn instead of the leggings. Basically, the dress uniforms of the cadets, after having been patterned from Foreign Service academies most especially the United States Military Academy at West Point, have remained essentially the same

R E S T R I C T E D

R E S T R I C T E D

251

throughout the years except for some alterations in order to conform with the present circumstances and requirement. 6.2.2 Formal Dresses/Ceremonial Uniforms 6.2.2.1 Full Dress White Under Arms 1. For cadet officers, it consists of a shako with white cotton pants, black socks and black shoes. 2. For cadet privates and non-commissioned officers, this uniform consists of the shako with pompom, full dress coat, cross strap with ammunition pouch, breast plate, waist belt with waist plate, gun gloves, white cotton pants, black socks, black shoes and arms prescribed. 3. This uniform is the official parade uniform of the Cadets Corps. It is also worn during Saturday Inspections and honor guard ceremonies. 6.2.2.2 Full Dress Gray Under Arms This uniform is essentially similar to the full dress white under arms except that the gray woolen high-waist trouser is used instead of the white pants. Cadets normally wear this during afternoon or evening parades. 6.2.2.3 Full Dress White This uniform is composed of the dress cap, full dress coat, waist belt, waist plate, white gloves, white cotton pants, black socks and black shoes. This uniform is used during formal ceremonies like awarding rites and in attending mass services. 6.2.2.4 Full Dress Gray Basically similar to the full dress white except that the gray woolen high-waist trousers are worn instead of the white cotton pants. Female cadets when prescribed can wear the long gray skirt in lieu of the trousers. This uniform is usually used during formal occasions like formal hops, Superintendent’s reception and Ring Hop ceremony.

R E S T R I C T E D

R E S T R I C T E D

252

6.2.2.5 Dress White/Dress Gray Under Arms This uniform consists of the dress cap, dress coat, cross straps with ammunition pouch, breast plate, waist belt and plate, gloves, white pants or gray pants, black socks and shoes, and arms as prescribed. Cadets wear this uniform during silent drill exhibitions. 6.2.3 Regular Cadet Uniforms 6.2.3.1 Dress White This uniform is composed of the dress cap, dress coat, white cotton pants, black socks and black shoes. Usually worn during weekends, holidays and on Mondays and Fridays. 6.2.3.2 Drill A This consists of the dress cap, gray gabardine short sleeve polo, gray gabardine pants with black lining, black web belt, black socks and shoes. During trips outside the Academy, the oversea cap is used instead of the dress cap. This uniform is used during Corps drills, and on Tuesdays and Thursdays. The Corps jacket could also be worn with this uniform for added warmth during cold weather season. 6.2.4 Battle Dress Uniforms/Utility Uniforms 6.2.4.1 Battle Dress Uniform (BDU) The uniform is almost similar to the BDU being used by the regular force in the armed services. Worn during Wednesdays by the cadets, it consists of the camouflage cap, camouflage trousers, camouflage coat, green round neck undershirts, belt, black socks and combat boots. 6.2.4.2 Combat Uniform This uniform in addition to the BDU consists of the helmet, camouflage suit, suspenders, web belt, combat pack and arms as prescribed. This is usually worn during combat and field exercises outside the PMA like the Joint Training and Field Training Exercises. 6.2.4.3 Fatigue Duty Uniform This uniform includes the BDU trousers, athletic shirts underneath, gray sweater, black belt and black wool socks and combat boots. Generally worn during fatigue duties like tree planting and fire fighting

R E S T R I C T E D

R E S T R I C T E D

253

exercises. However, during the conduct of club workouts and practices, the athletic socks and rubber shoes may be used vice the combat boots.

6.2.5 Physical Training Uniforms 6.2.5.1 Athletic Uniform This consists of the gray athletic shirt with PMA seal, athletic supporters for male cadets and black cycling shorts for female cadets, gray shorts, white athletic socks and rubber shoes. This uniform is normally worn during athletic activities. However, company athletic uniforms are colored according to their respective company colors and used during inter-company intramural competition. 6.2.5.2 General Athletic Uniform This consists of the gray athletic shirt, gray sweatshirt, jogging pants, athletics socks and rubber shoes. This is usually used during athletic formations. When worn inside the barracks, the uniform can be worn with slippers during the cadet’s free time. 6.2.5.3 Jogging Suits The jogging suit is worn during Corps squad practices and events especially during competitions outside the Academy. It consists of the gray jogging suit, athletic shirt and athletic socks and rubber shoes. 6.2.6 Special Uniforms 6.2.6.1 Dress Gray The dress gray is the privilege uniform, entertaining and visiting uniform. It is composed of the dress cap, dress coat, gray woolen trousers, black socks, and black shoes. 6.2.6.2 Study Uniform The study uniform is worn during study period from evening call-to-quarters at 1900H to tattoo at 2130H. It consists of the white polo, black tie, black sweater or Corps jacket gray side out, black belt, gray gabardine pants, black socks and shoes.

R E S T R I C T E D

R E S T R I C T E D

254

6.2.6.3 Picnic Uniform This consists of the white polo, Corps jacket blue side out, gray woolen trousers, black socks and shoes and generally worn during picnics and cadet hops. 6.3 PRESIDENTIAL SECURITY GROUP UNIFORMS 6.3.1 Background 1. Most history books written by known historians point to dates and events of the revolution but without mentioning the role of the forerunner of the Presidential Security Group in the revolution. Due to the limited materials and documents at the National Archives, the most significant date that the Corps of Presidential Guards was established is June 23, 1898 (Ref: Sentinels of Freedom – One Hundred of Presidential Security, pp 30-39). 2. An undated document, sourced from the Philippine Revolutionary Papers (previously known as the Philippine Insurgent Records) called for the creation of “EL CUERPO DE LA GUARDIA PRESIDENCIAL”. 3. Thus, the above-mentioned presidential security force of the first Philippine Republic was formally organized. The Corps had also to design its uniform as follows: a. A KHAKI COAT, with a marine collar; angled cuffs; the epaulettes and the pocket are of navy blue. Instead of buttons, they use (alamares) of the same color to close up the coat. The cuffs and the shoulder pads are studded with a double line of golden cords, and these remain attached to the coat, and its vertex, is a golden button similar to those actually used in the Revolutionary Army. 1) Khaki pants with the double strip of navy blue. 2) A Ross with a khaki lining, with a black shiny visor, and with a golden metal placed over a navy blue band which goes around the Ross in its lower outside part. In the upper part, which is more conspicuous, a tuff (crest of horsehair/bristles) or abaca of the navy blue color, attached by a golden metal declaration in the form of a sphere crowned by a tube of the same metal. In the middle front part of the Ross, the seal of the Republic is placed.

R E S T R I C T E D

R E S T R I C T E D

255

3) On solid piece of botitos (boots) of dark almond color. 4) In the third upper part of the left sleeve, a copper plate, designed in particular for the Corps. 5) Kid (leather) gloves of the same color as the uniform if possible. 6) Arms composed of alabarda (halberd), and a machete, straight with three and a half centimeters in width and with the length of a bar, double edge, with a point and cruceta of white metal. The machete is suspended from a cord of the same make, attached to a belt that is tightly winded inside. b. The GALA UNIFORM consist of a white drill casaca (cassock) with red cloth lapels and connected in its extremes by gold buttons, and covering the chest is a bid/breast-plate of white pique collar and cuffs (encarnados). For the shoulder pads, a double golden cord is attached with a button of the same metal. Studded to the cuffs are double golden cords. Woolen navy blue pants with double white strips. 1) Black Boots A white shiny capacete is studded by an Iloron or cimera de cerdas (bristles). The barbuguejo is of white metal. In the middle of the front part is the insignia of the corps, but in golden metal but more detailed and finely made so that it could adjust perfectly to the capacete. 2) White algodon gloves. 6.3.2 PSG Significant Uniforms As a support unit of the Armed Forces of the Philippines, the Presidential Security Group uses the prescribe uniforms of the Major Services such as the White Duck/Dress White, Bush Coat/Undress White, General Office Uniform, and many others. However, due to the peculiarity of its mission, PSG has designed its exclusive uniform that evolved from the history of “EL CUERPO DE LA GUARDIA PRESIDENCIAL” and from its past experiences during the attempts to overthrow the seat of government by the rightist.

R E S T R I C T E D

R E S T R I C T E D

256

6.3.2.1 Rayadillo 1. Description and wearing: a. Rayadillo is a gray gala uniform worn by the Troop Commander and Staff during Parades and Ceremonies. b. Worn with shaku and plume; formal aiguillette is used and placed at the right shoulder; an Igorot sash; a shoulder board; nameplate; miniature medals; sword strap with breast plate; sword; white gloves; and a black hop shoes with black socks. 2. When worn: During Parades and Ceremonies or as prescribed by the commander. 6.3.2.2 Gala Blue Uniform 1. Description and wearing: a. A dark blue gala both worn by officers and enlisted personnel of PSG usually those who are assigned with Presidential Guard Battalions (PGB) of PSG. Enlisted women of PSG also wear this uniform during parades and honors that require a WAC Platoon. b. Officers – wear shaku and plume; miniature medals; nameplate; formal aiguillette at the right shoulder; shoulder board; sword strap with breast plate; sword; igorot sash; white gloves; black hop shoes with black socks. c. Enlisted Men – wear shaku; nameplate; informal aiguillette at the left shoulder; igorot sash; white gloves; black shoes with black socks; and under arms with M14 Rifles. d. Enlisted Women – wear knee-length skirt instead of long pants; shaku; nameplate; informal aiguillette at the left shoulder; igorot sash; white gloves; black shoes; and knee-length black socks with yellow tassel. 2. Occasions for wear: a. During parades and ceremonies. b. Rendering honors to visiting Heads of States and Ambassadors.

R E S T R I C T E D

R E S T R I C T E D

257

c. Duty foyer honors at Malacañang Palace entrance. 6.3.2.3 Urban Camouflage Battle Dress Uniform 1. Description and wearing: a. Battle Dress Uniform with camouflage colors of black, white, and gray. b. Worn with black beret with PSG seal, black undershirt, and black combat boots. 2. When worn: a. Red alert status. b. Weekends and weekend duties. c. Parades. d. Presidential engagements. e. As prescribed by commanders. 6.3.2.4 Black Uniform (Special Reaction Unit) 1. Description and wearing: This is a uniform worn by members of Special Reaction Unit of Presidential Security Group (Reaction Force, Convoy Security, Snipers, and K-9 Handlers). There are two types of SRU Black Uniform: the black T-Shirt and long pants and the cover-all black. Convoy Security and Reaction Team at the engagement area wear helmets and bulletproof vest; with radio; short firearm; and combat boots. 2. When worn: a. Convoy security. b. Presidential engagements. c. As prescribed by commanders.

R E S T R I C T E D

R E S T R I C T E D

258

6.3.2.5 PSG Weekly Uniform 1. Monday Officers – Major Service Bush Coat/Undress White EP – Major Service GOU 2. Tuesday/Thursday Officers & EP – Service GOU 3. Wednesday/Friday Officers & EP – Barong Tagalog 4. Saturday/Sunday/Holiday/Red Alert Officers & EP – Urban Camouflage 6.4 GENERAL HEADQUARTERS AND HEADQUARTERS SERVICE COMMAND, ARMED FORCES OF THE PHILIPPINES 6.4.1 GHQ and HSC, AFP Gala Gray and White Uniform This uniform is the standard ceremonial uniform used by the GHQ & HSC, AFP Security and Escort Group (SEG) when rendering honors for both local and foreign dignitaries.

1. Symbolization

a. Gray color – signifies dignity and formality and millennium color. b. Three (3)-color stripes on the pants – these colors represent the Major Services; Green stripe represents the Army; Sky Blue stripe represents the Air Force; and the Navy Blue stripe represents the Navy. c. AFP Seal – Symbolizes and represents our zeal to uphold and achieve the AFP Mission. d. Gray Pants – for ordinary honors. e. White Pants – for Presidential honors.

R E S T R I C T E D

R E S T R I C T E D

259

2. The GHQ & HSC, AFP gala uniform is composed of the following accessories and paraphernalia: a. Pershing Cap – It is composed of a gray cloth cover, black visor, yellow chinstrap and AFP Coat of Arms. b. Gala Blouse – it is made of gray gabardine soft weaved cloth. It is a four-pocket gala blouse with yellow embroidered laurel leaves on its collar, coat of arms on its two (2) sleeves, 1.30 cm light gray cotton border placed at least 7.62 cm from the tip of the sleeves and with the following uniform paraphernalia: 1) Shoulder Board – a standard major service shoulder board is specifically worn with the officer’s gala uniform. 2) Nameplate – a black background plastic with white letterings bearing the surname of the person wearing the uniform. Worn centered at the flap of the right pocket. 3) Lanyard – a yellow tubular nylon lanyard (1.3 cm diameter) is worn on the left shoulder properly looped and its end hanged on the third middle button of the blouse. a) Brass Buckle and White Cotton Belt – it is worn with the blouse wrapped around the waist and fitted for the comfort of the wearer. b) Brass Button with Coat of Arms – small size for the pockets and bigger size on the blouse closure.

c) Awards and Decorations, Unit Seal and AFPOS worn with the uniform to give due recognition for the accomplishments of the bearer as prescribed. 4) Gloves – black leather gloves for officers and white cotton gloves for EP are worn during parades and ceremonies. 5) Sabers – chromed sabers are worn by officers as a symbol of their authority. 6) White/Gray Pants – it is made up of soft weaved gabardine cloth with three stripes on both sides of the outer seam representing the major services thru its distinct colors. It is worn with a corresponding garrison belt with silver metal buckle with seal.

R E S T R I C T E D

R E S T R I C T E D

260

7) Black Shoes – it is a low cut wet look shoes properly shined and cleaned used for parades and ceremonies. 6.4.2 Miscellaneous Regulation for Wear 1. Military personnel wearing uniform should always be under cover when outdoor. 2. Military personnel wearing the uniform should always walk by buddy or by group duly led by a designated marcher. The person in uniform is not authorized to walk in half uniform especially when outdoor. 3. The uniform is always worn with buttoned buttons. 4. Military personnel wearing the uniform are not authorized to stand on one (1) leg or slouch. 5. The uniform should not be worn during costume party or any other activities other than parades and ceremonies. 6. The uniform should always be properly pressed and dry cleaned before using. 7. The uniform should not be worn in going to Disco house, beer houses, gambling dens, and the like. 8. The uniform should always be worn with a prescribed black pair of nylon socks. 9. Military personnel wearing the uniform underarms should always be at right shoulder arms when walking especially when outdoor. 10. Military personnel are not authorized to ride on a motorcycle outside military camp or hitch outside a vehicle when wearing the uniform. 11. Sunglasses should not be worn in formations and ceremonies except for medical reasons. 12. Person wearing the uniform should avoid loitering outside the engagement/ceremonial area. 13. It is strictly prohibited to smoke when wearing the gala uniform and it is improper to smoke in uniform outdoors. 14. The person wearing the uniform should always be in authorized haircut.

R E S T R I C T E D

R E S T R I C T E D

261

6.5 INSIGNIA AND AWARDS

The standard rank insignia is the same as that worn by the Army, Air Force and the Navy and follows the same patterns and procedures when wearing the insignia. Such wearing shall be as prescribed in this Code.

Military awards is as prescribed in Chapter 8 of this Code. 6.6 ORGANIZATIONAL CLOTHING AND EQUIPMENT

The basic issues to personnel assigned to AFPWSSUs are the same as that issued to their respective major service, hence it shall be as prescribed in Chapter 7 of this Code. 6.7 CARE AND MARKING OF UNIFORMS

6.7.1 Care Military uniforms shall be given extra care in order to prolong

and maintain it’s presentable and neatly appearance. Added treatment procedures and techniques may be required in the laundering and drying of all types of uniforms so as to ensure their longevity of services and promote satisfaction in wearing them. Ironing of uniforms will add value in terms of preserving military uniforms and thereby avoiding unnecessary replacement that is costly for military personnel. Stowage of military uniform coats must be through hanging if possible while other types of uniforms shall need proper folding and wrapping in plastics if they are to be stored for longer period. 6.7.2 Markings Just like the major services, marking of the Technical and Administrative Uniforms is necessary for identifying individual’s property and belongings. This will prevent losses or unintentional use by other personnel. Normally, marking are made on the inner side of the uniforms such that t-shirt’s marks are made under the lowest inner portion while that of the pants are made on the inner waist part. Markings should be placed so as to make it hidden when normally worn. The markings should follow this form: LAST NAME AND INITIALS: EDRALIN OD Rank MAJOR

R E S T R I C T E D

R E S T R I C T E D

262

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

263

CHAPTER 7

ORGANIZATIONAL CLOTHING AND EQUIPMENT

“The individual clothing and equipment issued to individual military personnel cost the government sum of money, hence it is the obligation of every soldier to keep his clothing and equipment properly cared and maintained to its serviceability.”

7.1 ORGANIZATIONAL CLOTHING Organizational clothing is defined, as any clothing issued to an individual for which there is a requirement above and beyond authorized military uniforms. It remains the property of the military and is returned to the issuing authority when the individual is transferred. Organizational clothing is worn with working uniforms only while performing duties for which the garments are designed. The Armed Forces initially provides combat clothing and individual equipment and enlistment allowances, hence this makes it impossible for military personnel to have excuse for not having required and serviceable uniforms. It shall be the individual’s responsibility to insure he or she has the required serviceable items of combat clothing and that equipment issued are properly taken cared and maintain for it to function in excellent condition. Military personnel are also held responsible in replacing individual clothing when worn or have become unserviceable. Commanders and those charged with responsibilities must ensure that individual equipments are accounted for and operational since the battlefield is very unforgiving of neglect in this regard, to which lives’ depend.

R E S T R I C T E D

R E S T R I C T E D

264

7.2 INDIVIDUAL CLOTHING 7.2.1 Suit, Camouflage, Rip-stop Weave (Battle Dress Uniform) 1. QM SPEC NR C-55BDAC Approved for use on 13 July 2000 2. Basic Materials: 100% cotton, mercerized, of suitable grade and staple length, rips-top weaves. 7.2.2 Battle Dress Uniform, 50-50 Poly-Cotton 1. QM SPEC NR C-55BDA-PC Approved for use on 13 July 2000 2. Basic Material: 50% polyester and 50% cotton, of suitable grade and staple length, rips-top weaves. 7.2.3 Philippine Army General Office Uniform (PA GOU) 1. QM SPEC NR C-55GOU-PA Approved for use on 18 January 1994 2. Basic Material: 100% polyester shade mint green 7.2.4 Philippine Navy General Office Uniform (PN GOU) 1. QM SPEC NR C-55GOU-PN Approved for use on 11 July 2001 2. Basic Materials: 55% polyester and 45% wool cotton 7.2.5 Philippine Air Force General Office Uniform (PAF GOU) 1. QM SPEC NR C-55GOU-PAF Approved for use on 11 July 2001 2. Basic Material: 100% polyester blue shade 7.2.6 T-Shirt, Cotton, Short Sleeves 1. QM SPEC NR C-55TS Approved for use on 09 June 1993 Superseded QM SPEC NR C-55TS dated 10 December 1978

R E S T R I C T E D

R E S T R I C T E D

265

a. Type I – Round Neck Crew b. Type II – V-Shaped Neck (Optional – not required) 2. Colors: White, Olive Drab Green, Brown and Camouflage 3. Basic Material: 100% cotton fabric 7.2.7 Pants, Short 1. QM SPEC NR C-55PS Approved for use on 21 December 1999 Superseded QM SPEC NR C-55PS dated 22 June 1988 and QM SPEC NR C-55PSC Amendment 1 dated 09 February 1992 2. Color: White, Camouflage, Navy Blue, Black and Gray 3. Basic Materials: 50% cotton and 50% polyester 7.2.8 Brief, Poly-Cotton, White/OD 1. QM SPEC NR C-55BC1

Approved for use in February 1995 Superseded QM SPECS NR C-55BC 28 January 1988

2. Basic Materials: 50% cotton and 50% polyester

7.2.9 Socks, Nylon, Black 1. QM SPEC NR C-55B

Approved for use on 1 March 1975 a. Type I – Plain Khaki b. Type II – Rib Knit (1 X 1) 2. Basic Material: Knitted out of nylon yarns, 2 ply of acrylic and 2 ply of nylon yarns

R E S T R I C T E D

R E S T R I C T E D

266

7.2.10 Socks, Acrylic Nylon 1. QM SPEC NR C-553

Approved for use on 1 March 1976 2. Color: White, Black and Olive Drab Green (OD) 3. Basic Materials: Knitted out of acrylic with nylon yarns, 2 ply of acrylic and 2 ply of nylon yarns. 7.2.11 Shoes, Rubber, Low Cut 1. QM SPEC NR C-72SRL

Approved for use on 03 January 2000 Superseded QM SPEC NR C-72C3

2. Color: White, Green, Sky Blue, Black and Gray 3. Basic Materials: Leather. The leather for the toecap, front eyelet stay, inner side reinforcement, back tap, and back counter shall be polyester-cotton fiber reinforced synthetic leather (PFCRSL). 7.2.12 Shoes, Rubber, High Cut 1. QM SPEC NR C-72SRH

Approved for use on 03 January 2000 Superseded QM SPEC NR C-72C2 Amendment 1 dated

25 August 1976. 2. Color: White, Green, Sky Blue, Navy Blue, Black and Gray. 3. Basic Materials: Leather. The leather for the vamp, vamp ornament, quarters, side guard, toecap, eyelet stay and back counter shall be polyester-cotton fiber reinforced synthetic leather (PFCRSL). 7.2.13 Shoes, Dress, Black (Clarino) 1. QM SPEC NR C-72J-1

Approved for use on 24 March 1997

2. Basic Material: The upper part shall be made of imported synthetic leather (Clarino).

R E S T R I C T E D

R E S T R I C T E D

267

7.2.14 Shoes, Dress, Black Polyurethane Sole (Lightweight) 1. Color: The color for the finished dress shoes shall be black. 2. Basic Material: Leather 7.2.15 Boots, Combat (for Field Use Only) 1. QM SPEC NR C-72BTF

Approved for use on 07 October 1998 Superseded US MIL-B43154K (Adapted) dated 06

August 1998, as amended. 2. Basic Material: All Leather / Upper Canvass, Black 7.2.16 Belt, Waist, Web 1. QM SPEC NR C-74B2

Approved for use on 01 March 1975

2. Basic Material: Cotton or ramie yarns, vat dyed

R E S T R I C T E D

R E S T R I C T E D

268

7.3 ARMY UNIFORM CLOTHING AND EQUIPMENT

7.3.1 Enlistment Initial Clothing

The following initial clothing items are to be issued in kind to enlisted personnel and to trainees during the first six (6) months of trainee instruction service. ITEM NOMENCLATURE UNIT OF

ISSUE EM EW TRAINEE

Cap, Green Felt Ea 1 Beret, OD/Equivalent Ea 2 1 3 Cap, BDU/Equivalent Camouflage Ea 2 1 Suit, BDU, Equivalent Suit 4 3 Suit, GOU/Equivalent/ W/ Accessories Suit 4 3 1 T-Shirt, White/OD Round Neck Ea 8 6 6 Dog Tag Ea 1 1 1 Pants, Athletic, White/OD Ea 2 1 1 Brief, White/OD Ea 14 6 Panties, White Ea 12 Brassieres, White Ea 6 Half-Slip, White Ea 4 Hose, Flesh Color Ea 4 Belt, Waist, Web, Black Ea 2 2 1 Buckle, Belt, Silver Ea 1 1 1 Socks For Boots Pr 4 4 4 Socks, Black Pr 4 6 6 Sock For Rubber Shoes, White Pr 4 4 3 Boots, Combat (FU) Pr 1 1 2 Shoes, Dress, Low Cut Pr 1 1 Shoes, Rubber, Low/High Cut Pr 1 1 1

Shoes, Pump, 2” Heels, Blk Pr 1 Shoes, Svc, Low Cut, Black Pr 1

Poncho/Raincoat Ea 1 1 1 Towel, Bath, White/OD Ea 4 2 2 Towel, Face, White/OD Ea 2 Insignia, Collar, Svc, EP Pr 2 1 1 Bag, Shoulder, Carry, Blk Ea 1 Pillow, Foam Ea 1 2 1 Case, Pillow, White/OD Ea 2 2 2 Blanket, Pillow, White/OD Ea 2 2 1 Bar, Mosquito, White/OD Ea 2 1 1

R E S T R I C T E D

R E S T R I C T E D

269

7.3.2 Candidate Officers (OCS) and Candidate Soldiers (CS). During the period of military instruction/training, the following items of individual clothing and equipment shall be issued in kind to Candidate Officers (OCS) and Candidate Soldiers (CS). 7.3.2.1 Individual Clothing

OCS

CS

ITEM NOMENCLATURE

UNIT MALE

FEMALE

MALE

FEMALE

Cap, Beret, OD/Equivalent Ea 2 2 2 2 Blouse & Skirt, (Svc Color) Suit 2 Suit, BDU, OD/Equivalent Suit 3 3 3 3 Suit, GOU/Equivalent Suit 2 T-Shirt, White/OD Ea 6 6 6 6 Pants, Athletic Ea 2 2 2 2 Supporter Ea 2 2 Brief, White/OD Ea 6 6 Brassiere Ea 6 6 Half-Slip, White Ea 2 2 Hose, Flesh Color Ea 2 Belt, Waist, Web, Black Ea 1 1 2 2 Buckle, Belt, Silver Ea 1 1 1 1 Socks For Boots Pr 4 4 6 6 Socks, Cotton, Black Pr 4 4 Socks For Rubber Shoes, White

Pr 6 6 6 6

Boots, Combat, Tropical Pr 3 3 3 3 Shoes, Low Cut, Leather Pr 1 Shoes, Rubber, Low/High Cut Pr 2 2 2 2 Shoes, Pump, 2” Heels, Black Pr 1 Shoes, Svc, Low Cut, Black Pr 1 Sandals, Rubber Pr 1 1 1 1 Poncho/Raincoat Ea 1 1 1 1 Handkerchief, White/OD Ea 6 6 6 6 Towel, Bath, White/OD Ea 2 2 2 2 Towel, Face, White/OD Ea 2 2 2 2 Shaving Kit (W/ Blade) Ea 1 1 Sewing Kit Ea 1 1 1 1 Pillow, Foam Ea 1 1 1 1 Case, Pillow, White/OD Ea 2 2 3 2 Blanket, White/OD Ea 2 2 2 2 Bar, Mosquito, White/OD Ea 1 1 1 1

R E S T R I C T E D

R E S T R I C T E D

270

7.3.2.2 Individual Equipment

Bag, Duffle Ea 1 1 1 1 Bag, Laundry Ea 1 1 1 1 Bag, Field Ea 1 1 Belt, Pistol Ea 1 1 1 1 Belt, Suspender Ea 1 1 1 1 Bayonet, W/ Scabbard Ea 1 1 1 1 Can, Meat Ea 1 1 1 1 Canteen, Water Ea 1 1 1 1 Cup, Canteen Ea 1 1 1 1 Fork, Field Mess Ea 1 1 1 1 Spoon, Field Mess Ea 1 1 1 1 Helmet, Steel Ea 1 1 1 1 Liner, Helmet Ea 1 1 1 1 Holster, Pistol Ea 1 1 1 1 Knife, Field Mess Ea 1 1 1 1 Mat, Canvass Ea 1 1 1 1 Pack, Jungle Ea 1 1 1 1 Pouch, Medical Ea 1 1 1 1 Pouch, Magazine, Pistol Ea 1 1 1 1 Pouch, Magazine, Rifle Ea 2 2 2 2 Pouch, Canteen Ea 1 1 1 1 Tag, Id W/ Necklace Ea 1 1 1 1 Tent, Shelter Half Complete w/ Pins Poles & Guy Rope

Ea 1 1 1 1

Tool, Entrenching w/ Carrier Ea 1 1 1 1

7.3.3 Initial Clothing Allowance (ICA) Male/Female

L/I NOMENCLATURE U/I QTY/ INDV’L

COMBAT CLOTHING 1 Bar, Mosquito Nylon, Warp Knit White/OD Ea 1 2 BDU Suit w/o Cap, 100% Cotton Pr 3 3 Belt Waist, Nylon, OD Ea 1 4 Blanket, for Garrison Use Ea 2 5 Boots, Combat Pr 2 6 Buckle, Stainless w/ Army Logo Ea 1 7 Handkerchief, White Ea 6 8 Hat, Lousy, Camouflage Ea 1 9 Panties/Brief Ea 6

10 Pants, Athletic, Camouflage (100% Cotton) Pr 2 11 Pillow case, White Ea 2

R E S T R I C T E D

R E S T R I C T E D

271

12 Pillow Foam Ea 1 13 Poncho, Multi-Purpose, Camouflage Ea 1 14 Shoes, Rubber, Low-cut Pr 1 15 Sock for Combat Boots, Black Pr 6 16 Socks, Athletic, Acrylic, White Pr 6 17 Towel, Bath, Cotton, White Ea 2 18 T-Shirt, Green OD w/ Army Print, Round Neck Ea 6 INDIVIDUAL EQUIPMENT

19 Bag, Duffle, OD Ea 1 20 Belt, Piston Nylon, OD Ea 1 21 Belt, Suspender, Nylon, OD Ea 1 22 Can Meat, Aluminum Ea 1 23 Canteen, Water Aluminum Ea 1 24 Cup, Canteen, Aluminum Ea 1 25 Fork, Field, Mess Ea 1 26 Spoon, Field Mess Ea 1 27 Knife, Field Mess Ea 1 28 Mat Canvas, Polyester, OD Ea 1 29 Pack, Jungle, Camouflage w/ Frame Ea 1 30 Pouch, Ammunition, Camouflage Ea 2 31 Pouch, Canteen, Camouflage Ea 1

7.3.4 Reenlistment Clothing Allowance (Male)

L/I NOMENCLATURE U/I QTY/INDV’L1 Bar, Mosquito Ea 1 2 BDU, Suit w/o Cap (100% Cotton) Pr 4 3 Belt, Pistol, OD Ea 1 4 Belt, Suspender, OD Ea 1 5 Belt, Waist, OD Ea 1 6 Beret w/ PA Patch Ea 1 7 Blanket, OD (Field Use) Ea 1 8 Boots, Combat, HW, Black Pr 3 9 Brief, White Ea 8

10 Buckle, Stainless w/ Army Logo Ea 1 11 Cloth, GOA Green Set 1 12 Case, Pillow, White Ea 6 13 Handkerchief, White Ea 6 14 Pants, Athletic, Camouflage (100% Cotton) Ea 2 15 Pillow Foam Ea 1 16 Poncho, Tent, OD (New Specs) Ea 1 17 Shoes, Rubber, White, Low-cut Ea 1 18 Shoes, Low Cut, Clarino Pr 1

R E S T R I C T E D

R E S T R I C T E D

272

19 Socks for Boots, OD Pr 12 20 Socks, Athletic, White Pr 9 21 Towel, Bath Ea 2 22 T-Shirt Green OD Ea 12 23 Hat, Lousy, Camouflage Ea 1

7.3.5 Reenlistment Clothing Allowance (Female)

L/I NOMENCLATURE U/I QTY/INDV’L

1 Bag, Shoulder, Black Ea 1 2 Bar, Mosquito Ea 1 3 BDU Suit w/o Cap (100% Cotton) Ea 1 4 Belt, Waist, OD Ea 1 5 Beret w/ PA Patch Ea 1 6 Blanket, OD (Field use) Ea 2 7 Blouse and Skirt, GOU Pr 3 8 Boots, Combat, (Field Use) Pr 1 9 Brassiere, Form Support Ea 6 10 Buckle, Stainless w/ Army Logo Ea 1 11 Cap, Flight Black Ea 1 12 Case, Pillow, White Ea 2 13 Half-Slip, White Ea 4 14 Handkerchief, White Ea 6 15 Hat, Lousy, Camouflage Ea 1 16 Insignia, Collar, Service, EP Ea 1 17 Pants, Athletic, camouflage (100% Cotton) Ea 1 18 Panty, Cotton, White Ea 12 19 Pillow, Foam Ea 1 20 Poncho, Tent, OD (New Specs) Ea 1 21 Raincoat, Camouflage, EP Ea 1 22 Shoes, Pump, Leather, Black Pr 1 23 Shoes, Rubber, Low-cut Pr 1 24 Shoes, Service, Low-cut, Clarino Pr 1 25 Socks, Nylon, Black Pr 6 26 Socks, Athletic, White Pr 4 27 Socks, Woolen, Black Pr 4 28 Stocking, Panty Hose Ea 4 29 Towel, Bath Ea 2 30 T-Shirt, Green OD w/ Army Print Ea 6

R E S T R I C T E D

R E S T R I C T E D

273

7.3.6 Individual Clothing for APC/OCC

L/I NOMENCLATURE U/I QTY

1 Beret w/ Army Patch Ea 1 2 BDU Suit (100% Cotton) w/o Cap Pr 3 3 GOU Green Suit Pr 3 4 Field Jacket, Camouflage (100% Cotton) Ea 1 5 T-Shirt, Cotton, White, Round Neck Ea 6 6 T-Shirt, Cotton, White, w/ Collar Ea 2 7 T-Shirt, Cotton, Green OD, Round Neck Ea 6 8 Pants, Short, Camouflage Ea 2 9 Supporter Ea 1 10 Brief, Panty, White Ea 6 11 Belt Waist, Nylon (OD) Ea 2 12 Buckle, Stainless w/ Army Logo Ea 2 13 Socks for Boots Acrylic, Nylon, Blk Rib Knit

(Stretchable) Pr 6

14 Socks, Nylon, Black (Stretchable) Pr 6 15 Socks, Athletic, Acrylic, White Pr 6 16 Boots, combat, HW (Field Use) Pr 2 17 Shoes, Dress, Low Cut Lightweight

(POLYURETHANE) Pr 1

18 Shoes, Rubber, Low Cut Pr 1 19 Sandals, Rubber Pr 1 20 Poncho, Tent (New Spec) Ea 1 21 Raincoat, Camouflage, Officer Ea 1 22 Handkerchief White Ea 6 23 Hat, Lousy, Camouflage Ea 1 24 Towel, Bath, Cotton, White Ea 2 25 Towel Face, Cotton White Ea 2 26 Pillow Foam Ea 1 27 Pillow, Case, White Ea 2 28 Blanket, OD Garrison Use Ea 2 29 Bed Sheet, White Ea 2 30 Bar Mosquito, Nylon, Warp Knit, White Ea 1

R E S T R I C T E D

R E S T R I C T E D

274

7.3.7 Individual Equipment for APC/OCC

L/I

EQUIPMENT

U/I

QTY

1 Bag, Duffle, Polyester, OD Ea 1 2 Bag, Barracks, OD Ea 1 3 Bag, Deployment Extendable, Camouflage Ea 1 4 Bayonet w/ Scabbard Ea 1 5 Belt, Pistol, Nylon, OD Ea 1 6 Belt, Suspender, Nylon, OD Ea 1 7 Can, Meat, Aluminum Ea 1 8 Canteen, Water, Aluminum w/ Cup Ea 1 9 Entrenching Tool w/ Carrier Ea 1 10 Fork, Field Mess Ea 1 11 Spoon, Field Mess Ea 1

12 Helmet Liner, Kevlar Type w/ Net Cover Camouflage

Ea 1

13 Holster, Pistol Cal. 45 Black, Leather Ea 1 14 Knife, Field Mess Ea 1 15 Mat Canvas Ea 1 16 Pack, Field, camouflage w/ Frame Ea 1 17 Pouch, First Aid, Pocket, Nylon, OD Ea 1 18 Pouch, Magazine for Pistol Cal. 45 Ea 2 19 Pouch, Magazine, M16, Nylon, Camouflage Ea 1 20 Pouch, Canteen, Camouflage Ea 1 21 Tent, Shelter, Half, Polyester Ea 1

R E S T R I C T E D

R E S T R I C T E D

275

7.4 MARINES UNIFORM CLOTHING AND EQUIPMENT 7.4.1 Marines Initial Clothing Items/Designation U/I QTY 1 Blanket, Ilocano Ea 1 2 Boots, Combat Pr 2 3 Belt, Waist (Web) Green Ea 1 4 Buckle, Belt (Solid Brass) Marine Type 1 Ea 1 5 Cap, HBT (Camouflage) Utility Ea 1 6 Cap, Oversea/Garrison Ea 1 7 Cap, Khaki Green Uniform Ea 1 8 Handkerchief, White Ea 6 9 Insignia Collar (2 pcs/Set) Sets 3 10 Net, Mosquito (Green) Ea 2 11 Nameplate Ea 2 12 Pants, Short (Camouflage/OD) Ea 1 13 Pillow, Foam w/ case Ea 1 14 Polish, Shoe Metal (GLO) Ea 1 15 Polish, Shoe (KIWI) Ea 1 16 Shoe, Rubber (High Cut) Black Pr 1 17 Shoe, Low Cut (Wet Look/Leather) Black Pr 1 18 Sock, Athletic (White) Pr 3 19 Sock Wool (Black/OD) Pr 3 20 Camouflage Uniform (Ser 2000) Ea 2 21 Khaki Green Uniform Ea 2 22 Towel, Bath (Green) w/ Marines Markings Ea 1 23 Towel, Face (OD/White) Ea 1 24 T-Shirt, Green OD Ea 6 25 T-Shirt, White, Round Crewneck Ea 6 26 Underwear, Brief (Cotton/White) Ea 6 27 Sweater, Wool OD Ea 1 28 Bonnet, Wool OD Ea 1 29 Sandals, Rubber Pr 1 30 Dog Tag Ea 2

R E S T R I C T E D

R E S T R I C T E D

276

7.4.2 Marines Authorized Equipment Items/Description U/I QTY 1 Bag, Duffle (OD) Ea 1 2 Bayonet w/ Scabbard Ea 1 3 Belt, Pistol (Brass/Metal Buckle) Ea 1 4 Belt, Suspender (OD) Ea 1 5 Canteen, Water (Plastic Alum) Ea 1 6 Cup, Canteen (Alum) Ea 1 7 Fork, Field-mess (Stainless) Ea 1 8 Spoon, Field-mess (Stainless) Ea 1 9 Helmet, Steel/KEVLAR Ea 1 10 Helmet, Liner Ea 1 11 Helmet Cover Camouflage Ea 1 12 Mat, Canvas (OD) Ea 1 13 Meat, Can Field-mess (Alum) Ea 1 14 Pack, Jungle (OD) Light Marching/with Frame Ea 1 15 Poncho, Taffeta (OD) Ea 1 16 Pouch, Canteen (OD) Ea 1 17 Pouch, Magazine (Long) (OD) Ea 2 18 Pouch, Magazine (Short) (OD) M16 Rifle Ea 2 19 Sling, Rifle (M16 (Black/OD) Ea 1

R E S T R I C T E D

R E S T R I C T E D

277

7.5 AIR FORCE ORGANIZATIONAL CLOTHING 7.5.1 Initial Clothing Allowance (ICA) Male/Female

L/I NOMENCLATURE U/I QTY/IND’L1 Bar, Mosquito Nylon, Wrap Knit White/OD Ea 1 2 BDU Suit w/o Cap, 100% Cotton Pr 3 3 Belt Waist, Nylon, OD Ea 1 4 Blanket, for Garrison Use Ea 2 5 Boots, Combat, Black Canvass Pr 2 6 Buckle, Stainless w/ Air Force Logo Ea 1 7 Handkerchief, White Ea 6 8 Hat, Lousy, Camouflage Ea 1 9 Panties/Brief Ea 6 10 Pants, Athletic, Camouflage (100% Cotton) Pr 2 11 Pillow Case, White Ea 1 12 Pillow Foam Pr 1 13 Poncho, Multi-Purpose, Camouflage Pr 1 14 Shoes, Rubber, Low-Cut Pr 1 15 Socks for Combat Boots, Black Pr 6 16 Socks, Athletic, Acrylic, White Pr 6 17 Towel, Bath, Cotton, White Ea 2 18 T-Shirt, Green OD w/ Air Force Print, Round Neck Ea 6 19 T-Shirt, White, Round Neck Ea 6

7.5.2 Individual Equipment (Male/ Female)

L/I NOMENCLATURE U/I QTY/IND’L

1 Bag, Duffle, OD Ea 1 2 Belt, Piston Nylon, OD Ea 1 3 Belt, Suspender, Nylon, OD Ea 1 4 Can Meat, Aluminum Ea 1 5 Canteen, Water Aluminum Ea 1 6 Cup, Canteen, Aluminum Ea 1 7 Fork, Field, Mess Ea 1 8 Spoon, Field Mess Ea 1 9 Knife Field Mess Ea 1 10 Mat Canvas, Polyester, OD Ea 1 11 Pack, Jungle, Camouflage w/ Frame Ea 1 12 Pouch, Ammunition, Camouflage Ea 1 13 Pouch, Canteen, Camouflage Ea 1

R E S T R I C T E D

R E S T R I C T E D

278

7.5.3 Enlistment Clothing (Female) L/I NOMENCLATURE U/I QTY/IND’L 1 Bar Mosquito Ea 1 2 BDU Suit w/o Cap, 100% Cotton Pr 3 3 Belt Pistol, OD Ea 1 4 Belt Suspender, OD Ea 1 5 Belt, Web, Blue Ea 1 6 Beret w/ Air Force Patch Ea 1 7 Blanket, OD (Field use) Ea 1 8 Boots, Combat, HW, Black Pr 3 9 Panties, White Ea 8

10 Buckle, Stainless w/ Air Force Logo Ea 1 11 Cloth, GOU Blue Set 1 12 Case, Pillow, White Ea 2 13 Handkerchief, White Ea 6 14 Pants Athletic, Camouflage (100% Cotton) Ea 2 15 Pillow Foam Ea 1 16 Poncho, Tent, OD (New Specs) Ea 1 17 Shoes, Rubber, White Low Cut Ea 1 18 Shoes, Low Cut, Clarino Pr 1 19 Sock for Boots, OD Pr 12 20 Socks, Athletic, White Pr 9 21 Towel, Bath Ea 2 22 T-shirt White Round Neck Ea 12 23 Hat, Lousy, Camouflage Ea 1

7.5.4 Reenlistment Clothing (Female) L/I NOMENCLATURE U/I QTY/IND’L 1 Bag, Shoulder, Black Ea 1 2 Bar, Mosquito Ea 1 3 BDU w/o Cap (100% Cotton) Ea 3 4 Belt, Web, OD Ea 1 5 Beret w/ PAF Patch Ea 1 6 Blanket, OD (Field use) Ea 2 7 Blouse and Skirt (GOU Svc Color) Pr 3 8 Boots, Combat, (Field Use) Pr 1 9 Brassiere, Form Support 6 Ea 6

10 Buckle, Stainless w/ Air Force Logo Ea 1

R E S T R I C T E D

R E S T R I C T E D

279

7.5.5 Authorized Clothing for APC/OCC

L/I NOMENCLATURE U/I QTY/IND’L1 Beret w/ Air Force Patch Ea 1 2 BDU suit (100% Cotton) w/o Cap Pr 3 3 GOU Blue Suit Pr 3 4 Field Jacket, Camouflage (100% Cotton) Ea 1 5 T-shirt, Cotton, White Ea 6 6 T-shirt, Cotton, White, w/ Collar Ea 2 7 T-shirt, Cotton, Green OD w/ Air Force Print Ea 6 8 Pants, Short, Camouflage Ea 2 9 Supporter Ea 1

10 Brief / Panty, White Ea 6 11 Belt, Waist, Web (OD) Ea 2 12 Buckle, Stainless w/ Air Force Logo Ea 2 13 Socks for Boots Acrylic, Nylon, Black Ribbon

Knit (Stretchable) Pr 6

14 Socks, Nylon, Black (Stretchable) Pr 6 15 Socks, Athletic, Acrylic, White Pr 6 16 Boots, Combat, HW (Field Use) Pr 2 17 Shoe, Dress, Low Cut Light Weight

(POLYURETHANE) Pr 1

18 Shoes, Rubber, Low Cut Pr 1 19 Sandals, Rubber Pr 1 20 Poncho, Tent (New Spec) Ea 1 21 Raincoat, Camouflage, Officer Ea 1 22 Handkerchief White Ea 6 23 Hat, Lousy, Camouflage Ea 1 24 Towel, Bath, Cotton, White Ea 2 25 Towel, Face, Cotton, White Ea 2 26 Pillow Foam Ea 1 27 Pillow, Case, White Ea 2 28 Blanket, OD Garrison Use Ea 2 29 Bed Sheet, White Ea 2 30 Bar Mosquito, Nylon, Wrap Knit, White Ea 1

R E S T R I C T E D

R E S T R I C T E D

280

7.5.6 Air Force Organizational Equipment

L/I NOMENCLATURE U/I QTY 1 Bag, Duffle, Polyester, OD Ea 1 2 Bag, Barracks, OD Ea 1 3 Bag, Deployment Extendable, Camouflage Ea 1 4 Bayonet w/ Scabbard Ea 1 5 Belt, Pistol, Nylon, OD Ea 1 6 Belt Suspender, Nylon, OD Ea 1 7 Can Meat, Aluminum Ea 1 8 Canteen, Water, Aluminum w/ Cap Ea 1 9 Entrenching Tools w/ Carrier Ea 1 10 Fork, Field Mess Ea 1 11 Spoon, Field Mess Ea 1 12 Helmet Liner, Kevlar Type w/ Net Cover

Camouflage Ea 1

13 Holster, Pistol Cal. 45, Black, Leather Ea 1 14 Knife Field Mess Ea 1 15 Cap, Flight, Black Ea 1 16 Case Pillow, White Ea 2 17 Half Slip, White Ea 4 18 Handkerchief, White Ea 6 19 Hat, Lousy, Camouflage Ea 1 20 Insignia, Collar, Service, EP Ea 1 21 Pants, Athletic, Camouflage (100% Cotton) Ea 1 22 Panty, Cotton, White Ea 12 23 Pillow, Foam Ea 1 24 Poncho, Tent, OD (New Specs) Ea 1 25 Raincoat, Camouflage, EP Pr 1 26 Shoes, Pump, Leather, Black Pr 1 27 Shoes, Rubber, Low Cut Pr 1 28 Shoes, Service, Low Cut, Clarino Pr 1 29 Socks, Nylon, Black Pr 6 30 Socks, Athletic, White Pr 4 31 Socks, Woolen, Black Pr 4 32 Stocking, Panty Hose Ea 4 33 Towel, Bath Ea 2 34 T-shirt, Green OD w/ Air Force Print Ea 6 35 Pouch, Canteen, Camouflage Ea 1 36 Tent, Shelter, Half, Polyester Ea 1

R E S T R I C T E D

R E S T R I C T E D

281

CHAPTER 8

AWARDS

“Uncommon valor was a common virtue.” Admiral Nimitz 8.1 GENERAL 8.1.1 Purpose This chapter prescribes the policies, rules and regulations pertaining to awards and decorations in the Armed Forces of the Philippines and such other awards from other government agencies, private organizations, and foreign states and institutions that are accorded to military personnel and civilian employees. The coverage set forth in this Code are those of the definitions, descriptions, who, when, and where awards and decorations are bestowed and does not include the procedures and related details in the processing of such awards and decorations in the Armed Forces of the Philippines where as such is established in the AFP Regulation G 131-052. Awards discussed in previous chapters in part are supplementary hereof. All other awards not covered in this Code shall be referred to AFPR G 131-052 to include recent changes.

8.1.2 Definition of Terms 1. Award. Award is derived from the old French word “ESTWAR” which means something that is conferred or bestowed upon a person. It is an all-inclusive term covering any decoration, medal, badge, ribbon bar, or attachment bestowed on an individual, anything tangible or intangible granted to an individual in recognition of acts of gallantry or heroism, meritorious services or skill and proficiency.

R E S T R I C T E D

R E S T R I C T E D

282

2. Military Award. It is a reward given by the command to deserving units or individuals in recognition of extraordinary, exceptionally meritorious or conspicuously outstanding acts of heroism and other acts or services which are above and beyond the normally expected and which distinguishes the unit or individual from among those performing similar acts or services. 3. Attachment. Any appurtenance such as the anahaw leaf, spearheads, equilateral triangle and service star device, each of which is further categorized into bronze, silver and gold, worn on the suspension ribbon of a medal or on the ribbon bar. Appurtenance is a device added or attached to the basic decoration to distinguish each deed and succeeding deeds of achievements falling under the same category of the decoration. 4. Badge. An award to an individual for some special proficiency or skill, which consists of a medallion hang from a bar or bars. An award to an individual for special proficiency, occupational specialty, eligibility, training, schooling or outstanding achievements. It may consist of medallion, disc, rectangular metal plate, wings or other shapes of metal. 5. Conspicuous. It is an observed act that distinguishes an individual above others in the performance of duty. 6. Decoration. “Decoration” originates from the Latin word “decoratus” which means the act of adoring and honoring. An award bestowed on an individual for a specific individual act or acts of gallantry or for meritorious service. A piece of metal/material representing an award. Military decorations are physical devices bestowed upon a unit or individual by virtue of military award. 7. Eminently. High in merit characterized by high degree in the performance of one’s duty. 8. Enemy. A person or group of persons opposed to duly constituted authority through violence and whose objective is to injure or destroy lives and property. 9. Exemplary. A commendable deed or act or service that sets a sample or illustrations. 10. Heroism. Specific acts of bravery or outstanding courage, or closely related series of heroic acts performed within a short period of time. 11. Honorable. A praiseworthy accomplishment of duties or services, showing a sense of what is right, proper and noble.

R E S T R I C T E D

R E S T R I C T E D

283

12. Lapel Button. A miniature enameled replica of the ribbon bar. 13. Major Responsibility. Duty of such a character that exceptional/meritorious service therein has contributed in a high degree to the success of major command, activity, agency, installation or project. Such duty should significantly influence the accomplishment of the primary mission of a major command or a military activity contributory to the realization of major objectives of the AFP and the government. 14. Medal. An award issued to an individual for performance of certain duties, acts or services, consisting of a medallion hanging from a suspension ribbon of distinctive colors. The distinctive physical device of metal and ribbon, which constitutes the tangible evidence of an award. 15. Meritorious achievement. Praiseworthy execution of duties over a period of time or accomplishment with an easily discernible beginning and end, carried to completion. 16. Meritorious Service. Praiseworthy execution of duties over a period of time. 17. Military Decoration. An award given on a restricted individual basis in recognition of and as a reward for heroic, extraordinary, outstanding, and meritorious acts, achievements or services. 18. Miniature Medal. A replica of a standard size medal, made to one-fourth from the original scale. Foreign miniature medal will not exceed the size of American miniature medal. The award is authorize for wear on mess jacket, barong tagalog or evening dress. The wearing of miniature on civilian clothes shall be limited to ceremonial occasions only. The Medal of Valor will NOT be worn in miniature. 19. Outstanding. A performance of duty standing out from others or services that exceeds normal expectations. 20. Position of Major Responsibility. The office or position duly created at Major Services, AFPWSSUs, Unified Commands, or at higher levels given the responsibility of initiating and involving major plans, activities, programs or projects in the pursuit of AFP missions and objectives. Definitely, such office or position has the inherent authority and capability to accomplish such major plans, activities, programs or projects. Secondary or subordinate positions assigned functionally supportive roles in furtherance of the Command’s own initiative is not included within the context of this definition.

R E S T R I C T E D

R E S T R I C T E D

284

21. Ribbon Bar. A portion of the suspension ribbon of a medal worn in lieu of the medal. The dimensions of all ribbons shall be 3.5 cm by 1 cm. Ribbon bars are also authorized for certain awards which have no medals; e.g., Presidential Unit Citation, Martial Law, EDSA Revolution, People Power II, etc. 22. Service Medal. An award given generally in recognition of honorable performance of duty during designated campaign of conflicts. An award issued to an individual to denote participation in a campaign, war, national emergency or expedition, or to denote service requirements fulfilled in a creditable manner.

23. Campaign Medal. It is an award to military personnel who participated in the campaign and operations in any of the specific areas for at least six months. 24. Service Ribbon. A replica of the suspension ribbon of the service medal, attached to a bar equipped with a suitable attaching device. A service ribbon is issued with each service medal. 25. Unit Award. An award made to an operating unit for outstanding heroism or achievement and worn only by members of that unit who participated in the cited action. Military personnel who were assigned to the cited unit must be specifically included by name in the recommendation or citation to be eligible to wear the award on the uniform. 26. Valuable. A performance of duty or service having estimable importance. 27. Wound. An injury on any part of the body, which requires treatment by a medical officer/ aidman. 8.1.3 General Policies 1. Military personnel may wear those awards prescribed in the AFP Awards manual, but only when authorized by competent authority. 2. Military personnel who receive awards from other departments of the Philippine government; or from foreign governments or other agencies may wear such awards on the AFP uniform only as authorized herein. 3. Military personnel who served in or attached to other branch of service other than their own and received a decoration, unit citation award, or service award may wear the award, unless otherwise prohibited by regulations.

R E S T R I C T E D

R E S T R I C T E D

285

4. Officers suspended from grade and command and enlisted personnel serving sentence of confinement will not wear awards. 5. Military personnel will not wear awards on the cape, jacket, service sweater, utility uniform or the maternity work uniform. 6. Aviators, parachutist, combat infantry men’s badge may be worn at all times when in uniform or when equipped for combat or simulated combat. These badges are worn above the line of medals or ribbons on the left breast pocket. 7. Command Badges shall take precedence over all other badges, hence, it shall always be placed 0.30 cm above other badges. Incumbent commanders shall wear their command badges 0.30 cm above the right pocket or 0.30 cm above the lines of ribbons or other badges. Non-current commanders authorized to wear command badges shall wear their badges 0.30 cm above the left pocket or 0.30 cm above the left pocket or above the line of ribbons. 8. Badges for marksmanship, etc. for any weapon, only the badge for qualification at the time will be worn. Badges attained by individual personnel as a result of qualification in weapon designated as their principal arm may be worn from the date the qualification or re-qualification is announced in order until their next opportunity to qualify. Badges attained in weapons other than those designated as their principal arm may be worn during the period of their current enlistment and until they are again tested for qualification. 9. The Philippine Republic Presidential Unit Citation Badge, Martial Law Badge, EDSA and other distinguished badges are parts of the uniform and must always be worn on the service coat or shirt above the right breast pocket with the Philippine Republic Presidential Unit Citation Badge on the right of the Distinguished Unit Badge. 10. Foreign Decorations and Service Medals: a. The wearing of foreign decorations and medals and the corresponding service ribbon is optional. b. No person is authorized to wear any foreign decoration or any regalia so nearly resembling the same as to be calculated to deceive unless such wearing thereof may be authorized by such state, nation or government.

R E S T R I C T E D

R E S T R I C T E D

286

c. Precedence of foreign decorations when authorized for wear. Foreign decorations and service medals when worn shall be in the following order of precedence: 1) Individual decorations of the Armed Forces of the Philippines. 2) Individual decorations of the US Army. 3) Individual decorations of any foreign nation. 4) Service medals authorized by the Armed Forces of the Philippines. 5) Service medals authorized for wear by foreign countries. 11. Service ribbons, bronze stars and miniatures – The announcement in General Orders of the award of any decoration shall be the authority for subject individual to wear the service ribbon of the award pending the actual presentation of the decoration itself. a. Service ribbons may be worn on the service or white coat. They will not be worn on the Mess Jacket, or camouflage uniform or on civilian clothes, or overcoat. They should be worn in the same order and precedence as prescribed for service medals and decorations. b. Bronze Stars – Bronze stars are worn on the service ribbons to indicate the number of times of participation in a regional campaign or battle. c. Miniatures – Miniatures of decorations, service medals, and ribbons are worn attached to a bar or chain on the left lapel of evening clothes, military and civilian. Miniature anahaw leaf cluster will be worn on the appropriate ribbon for each cluster awarded. 8.2 DIFFERENT AWARDS AND DECORATIONS 1. Personal decorations, unit awards, non-military decorations, campaign and service awards, foreign personal decorations, foreign unit awards, foreign service awards, marksmanship badges, and awards of military societies and other organizations will be given precedence in the order listed.

R E S T R I C T E D

R E S T R I C T E D

287

2. All ribbons and medals must be mounted and worn according to the precedence listed herein. 3. Awards shall be worn in order of precedence from top down and from the wearer’s right to left, unless otherwise specified herein. 4. Personal Decorations’ Order of Precedence:

a. Medal of Valor (MOV) b. Distinguished Conduct Star (DCS) c. Distinguished Service Star (DSS) d. Gold Cross (GC) e. Philippine Legion of Honor (PLOH)

1) Degree of Chief Commander 2) Degree of Commander 3) Degree of Officer 4) Degree of Legionnaire

f. Outstanding Achievement Medal (OAM) g. Gawad Sa Kaunlaran (GSK) h. Distinguished Aviation Cross i. Distinguished Navy Cross j. Bronze Cross k. Military Merit Medal l. Silver Wing Medal m. Military Commendation Medal n. Wounded Personnel Medal o. Military Civic Action Medal p. Armed Forces Conduct Medal q. Sagisag Ng Ulirang Kawal r. Civilian Employees Honorary and Incentive Award

1) Distinguish Honor Medal 2) Superior Honor Medal 3) Civilian Merit Medal

s. Long Service Medal t. United Nations Service Medal And Ribbon u. Anti-Dissidence Campaign Medal And Ribbon v. Luzon Anti-Dissidence Campaign Medal And

Ribbon w. Visayan Anti-Dissidence Campaign Medal and Ribbon x. Mindanao Anti-Dissidence Campaign Medal and Ribbon y. Disaster Relief & Rehabilitation Operation Medal

5. Foreign Personal Decorations. Military personnel who have been specifically authorized by law to accept decorations from foreign governments may wear them after all local campaign and service awards in the order of their receipt. When an individual is authorized to wear more than

R E S T R I C T E D

R E S T R I C T E D

288

one award from the same country, the order of precedence of those particular awards will be determined by the rule of the country concerned. 8.2.1 Badges and Decorations 8.2.1.1 Philippine Republic Presidential Unit Citation Badge (PRPUCB) This is awarded by the President of the Republic of the Philippines to: 1. Any unit of the Armed Forces of the Philippines that distinguished itself with exceptional loyalty and fidelity, extraordinary accomplishment in the field of law enforcement in maintaining the security of the land, participation in relief and rehabilitation and for advancement of socio-economic and political goals. 2. All members of the AFP including members of the Philippine Merchant Marine, and all members of the Armed Forces of the United States and allied nations or associated with the United States in the war against the Japanese Empire during the period 7 December 1941 to 10 May 1942, inclusive and during the Philippine Campaign of Liberation in 1944-1945. 3. All members of the AFP including members of the Philippine Merchant Marine for campaign against an enemy of the Philippines; or participation in the unit massive operations within a definite period of time. 4. Units of friendly foreign nations for humanitarian service to the Filipino people. 5. Description: The badge is a rectangular metal plate with three enamel colored stripes and bordered with a golden frame ornamented with palm leaves with the tip leaves meeting in the center. The color at the dexter flank is blue; the center, white; and the sinister flank, red. The Blue color stands for nobility; white for sincerity and purity; red for bravery; gold for honor and prestige; and palm leaves signify triumph and glory. 8.2.1.2 Barangay Presidential Unit Citation Badge (BPUCB) 1. This is awarded by the President of the Republic of the Philippines to any paramilitary unit that has rendered exceptionally outstanding service in peace and order campaign upon the recommendation of the Chief of Staff, AFP.

R E S T R I C T E D

R E S T R I C T E D

289

2. To earn this award, the unit must have distinguished itself in combat and achieved extraordinary accomplishment, which sets it apart from the other units. 3. Description: The badge is rectangular in shape with three equal horizontal stripes of blue, white and red arranged in the order from top to bottom. It is bordered by ornamental Narra leaves in gold. 4. The red, white and blue color symbolizes the national colors of the Philippine Flag and the Narra leaves signify strength and unity against armed enemy. 8.2.1.3 AFP Enlisted Personnel of the Year Badge 1. This is awarded by the Chief of Staff, AFP to Enlisted Personnel of the Year for having an outstanding achievement and performance of duties and possessing good traits and characteristics to be determined by a board created by GHQ AFP. 2. Description: The badge is a disc in gold consisting of the sun, triangle, scroll, wreath and caption. The Philippine sun is gold superimposed on the triangle that is placed in normal position on the center. The scroll in gold occupies the lower portion of the disc, with its end supporting the tendrils of the wreath. Three golden stars are embossed in the upper portion of the badge. Inscribed on the scroll in gothic letters is the phrase: “AFP Enlisted Personnel of the Year; GHQ Enlisted Personnel of the Year; PA Enlisted Personnel of the Year; PAF Enlisted Personnel of the Year; PN Enlisted Personnel of the Year. 3. The sun symbolizes the Philippines and the first eight (8) provinces that revolted against Spain; the triangle and the three stars represent the three major islands of the Philippines; and the scroll and wreath symbolize honor of the service for outstanding achievements. 8.2.1.4 AFP ROTC Cadet of the Year Badge 1. This is awarded by the Chief of Staff, AFP and Commanders of Major Services to ROTC Cadet/Cadette of the Year for outstanding achievements for the year as student, cadet/cadette or as private citizen; outstanding performance of duties as cadet/cadette; high scholastic records as cadet/cadette for the last three semesters, to include 4th year high school; and with traits and characteristics on personal appearance, oral communicative ability, and general knowledge.

R E S T R I C T E D

R E S T R I C T E D

290

2. Description: The badge is gold-plated disc with a triangle and sunburst at the center and bordered by three stars, sampaguita garland and a scroll. Below the triangle base is the year of the award. A scroll at the base extends halfway on both flanks, with an inscription: AFP ROTC Cadet/Cadette of the Year. 8.2.1.5 AFP Civilian Personnel of the Year Badge 1. This awarded to any AFP civilian personnel by the Chief of Staff, AFP and the Commanders of Major Services, for rendering at least five years continuous service with the nominative agency on the following bases: efficiency – 40 points; achievement, resourcefulness and creativity – 40 points; length of service – 10 points; and traits and characteristics – 10 points. Selected civilian personnel of the year should never receive a score less than 80 points. 2. Achievement, resourcefulness and creativity shall include, among others, an idea, suggestion, or invention for improvement to effect economy in operation, to increase production, to improve working condition or service, or otherwise benefit the government; performance of extraordinary exceptional act; the courageous handling of an emergency situation; outstanding scientific, technical and executive abilities, which contributed or resulted in efficiency and economy in government operations. 3. Employees with pending administrative cases or with derogatory records shall not be considered for nomination. 4. Description: The badge is gold-plated disc with the AFP seal centered and embossed with the inscription “AFP Model Supervisor/Employee” along the border. 5. The sun signifies the Philippines and the first eight (8) provinces that revolted against Spain; the triangle and three stars represent the three major islands of the Philippines; and the scroll and wreath symbolize outstanding achievements. 8.2.1.6 COMBAT COMMANDER’S (KAGITINGAN) BADGE (CC (K) B) 1. This awarded by the Commanding General, PA to army officers and enlisted personnel who have commanded combat and combat support units for at least one cumulative year; all other PA military personnel who have rendered at least one cumulative year of combat duty regardless of their assignment, including those engaged in combat service support operations. Corresponding honorary badges may be awarded to all other personnel from the Air Force, Navy and Marine Corps

R E S T R I C T E D

R E S T R I C T E D

291

who have been assigned to units engaged in combat, combat support, and combat service support operations for at least one cumulative year, regardless of duty assignment or position. 2. Depending on the category of the individual awards, a bronze or silver star(s) is/are placed on the badge, indicating that the wearer has been recipient of the following military awards earned in combat; wounded personnel medal – one bronze star, military commendation medal – two bronze stars; military merit medal with bronze spearhead device – three bronze stars; gold cross – one silver star; distinguished conduct star – two silver stars; and medal of valor – three silver stars. The highest equivalent bronze or silver star(s) may be attached to combat commander’s (K) badge to provide that the corresponding medal was earned by a military person as a commander, regardless of level of command. 3. Description: The badge is ovate in shape and an old Tagalog alphabet “K” in red is placed at the center of the badge superimposing a tabak with its blade in silver and its handle in black, placed in horizontal position. Surrounding the tabak are two tendrils of laurel leaves in elliptical pattern. The background of the badge is moss green and its center contains yellow stripe(s). 4. The old tagalog letter K stands for “Kagitingan”, the Filipino word for valor; red stands for bravery; tabak represents the traditional weapon used by the Filipino people in their struggle for freedom; silver blade stands for firm determination of the Filipinos; black handle represents the carabao horn which reflects the sturdiness of the character of the Filipino people; the laurel leaves signify greatness; olive drab tendrils stand for field uniform used in combat; and bronze star indicates that the wearer is a recipient of a service medal earned in combat. 5. Accordingly, the badge has traditional features corresponding to the level of command: a. For Squad Leader – the badge is the basic form with no combat award (without star). b. For Platoon Leader and awardee of wounded personnel medal – the badge will have two gold stripes and one bronze star superimposed on the stripes. c. For Company Commander and awardee of MCM for bravery – three gold stripes and two bronze stars.

R E S T R I C T E D

R E S T R I C T E D

292

d. For Battalion Commander and awardee of MMM with bronze spearhead device – four gold stripes and three bronze stars. e. For Tactical Brigade/Area Commander – one gold stripe. f. For Division Commander/Separate Brigade Commander and awardee of distinguished conduct star – two gold stripes and two silver stars. g. For Unified Command Commander and awardee of medal of valor – three gold stripes and three silver stars. 8.2.1.7 PAF Gold Wings Badge 1. This is awarded by the Commanding General, PAF to PAF officers, pilots, Chiefs of States and Chiefs of Air Force of friendly foreign nations under the following category: a. Category I – Designated Commanding General/Officer of the PAF. b. Category II – Attains the rank of Brigadier General or higher. c. Category III – Permanent Colonel who has been designated or has held at least an aggregate total of one year or combination of the positions: Vice Commander, PAF; Chief of Air Staff; Chief of a Coordinating Air Staff at HPAF level; and Commander of a combat wing. d. Category IV – A pilot must have attain of total 6,000 flying hours, provided that 2,000 hours are logged in fighter craft and 4,000 hours in other types of aircraft; 7,500 flying hours provided that 1,500 hours are logged in fighter aircraft and another 6,000 hours in other types of aircraft; and 9,000 flying hours provided that 500 hours are logged in fighter aircraft and 8,500 hours in other types of aircraft. 2. A pilot who has flown light aircraft may be awarded the PAF Gold Wings provided he has logged a total of flying time of 12,000 hours in such aircraft. 3. A pilot who has only flown a transport, gunship or amphibious aircraft may be awarded the badge provided he has logged a total of 10,000 flying hours in such aircraft.

R E S T R I C T E D

R E S T R I C T E D

293

4. Description: The badge has the golden figure of a monkey-eating eagle in touch down position with an equivalent triangle, consisting of Philippine sun and three stars, superimposed on the eagle. Sampaguita leaves in circular formation are placed above the wings with a big golden star in its center. 5. The triangles stands for liberty, equality and fraternity while the three stars signify the three major islands of the Philippines; the big star represents the Republic of the Philippines; and the eagle symbolizes air defense of the country. 8.2.2 Command at Sea Badge This is awarded by the Flag Officer-in-Command, PN to Naval Officers under the following category: 8.2.2.1 Command at Sea Badge 1. Must have an aggregate of 365 days RFS with at least two years of command. 2. Must have an accumulated sea duty service of not less than six (6) years, excluding detached service. 3. Sea duty must be rated “efficient” and “honorable”. The officer’s tour of duty as a unit CO afloat may be considered efficient and honorable if the ship under his command has not been grounded nor involved in any accident or incident due to his own fault, negligence or incompetence; during his incumbency, the unit has passed all Annual General Inspections and Operational Readiness Evaluation; his integrity is unquestionable; and he has successfully accomplished all missions assigned to his unit. 8.2.2.2 Senior Command at Sea Badge 1. Must be an awardee of the Command at Sea Badge. 2. Must have commanded any of the naval organizations for an accumulated period of not less than six (6) months. 8.2.2.3 Senior Command at Sea Badge with Star(s) 1. Must be an awardee of the Senior Command at Sea Badge.

R E S T R I C T E D

R E S T R I C T E D

294

2. Occupying a TO position for which a Flag rank is authorized. 3. Description: The badge consists of two tendrils of sampaguita leaves forming a circular pattern with the anchor set in upright position at the center. A sea lion holding a dagger at the right hand, facing the left flank, superimposed the anchor. One silver star is fixed at each tip and another on top of the ring linkage of the anchor for Senior Command at Sea Badge and the Senior Command at Sea Badge with star(s). The whole badge is gold-plated for the Command at Sea Badge and silver-plated for the other badges. 4. The sea lion over an anchor is the international symbol of the sea-borne people; sampaguita garland signifies the dignity and nobility of the commander; and the three stars symbolize the three major islands of the Philippines. 8.2.3 Command Badge (Philippine Marine Corps) This is awarded by the Commandant, Philippine Marine Corps to officers of the Philippine Marine Corps under the following categories: 8.2.3.1 Marine Basic Command Badge (With and Without Star) 1. Completed a continuous tour of six (6) months in an operational area or one (1) year of meritorious service in garrison as Commanding Officer of a marine platoon or company or equivalent units. 2. Served a continuous tour of six (6) months notwithstanding the size of the organization at the time. 8.2.3.2 Marine Senior Command Badge (With Star) 1. Completed a continuous tour of six (6) months in operational area or one (1) year of meritorious service in garrison as Commanding Officers of marine battalions or equivalent units. 2. May also be awarded to former Commanding Officers/Commandants of the Philippine Marine Corps since 07 November 1950, provided they have served a continuous tour of duty of six (6) months as such, notwithstanding the size of the organization at the time.

R E S T R I C T E D

R E S T R I C T E D

295

3. Honorary Award of Marine Command Badge is given to those officers who, in one way or another, assisted in the growth and development of the Philippine Marine Corps. 4. Description: The badge is in the form of an anchor relief in gold superimposed by the cross rifles, star and garland. The garland consists of sampaguita leaves formed around the star in the case of senior command badge. 5. The anchor symbolizes the naval service; cross rifles signify infantry of the naval service; the star stands for command; and the garland signifies the senior command level. 8.2.4 Marksmanship Badge 1. This is awarded to officers, enlisted personnel, trainees and cadets of the AFP by the Commanders of Major Services, Unified Commands, AFPWSSUs, Divisions/Brigades and equivalent units in the PAF and in the PN. 2. The award is given to the qualified personnel for his ability and proficiency in the handling of arms. Initially, the badge and the additional bar shall be awarded to military personnel who may acquire any qualification in the marksmanship training. And for each qualification, an additional bar shall be attached to the badge. The bar denotes the weapon and the corresponding degree of qualification, which may be a marksman, sharpshooter or an expert. 3. The badge is a circular target consisting of three concentric circles in black lines against white background. The wreath of sampaguita leaves occupies the edge of the disc in circular pattern. 4. The target stands for marksmanship; the arrows for shooting; and the wreath for proficiency. 8.2.5 AFP Parachutist Badge (Basic) The parachutist badge is an oxidized silver pin 4 cm long and 2.5 cm in height consisting of an open parachute flanked on either side by wings curving up and inward so that the tips join the edge of the parachute canopy. At the center of which is the Philippine coat of arms. This is awarded by the Chief of Staff, AFP and Commanders of Major Services to military personnel of the AFP and friendly foreign nations under the following categories:

R E S T R I C T E D

R E S T R I C T E D

296

8.2.5.1 Basic Parachutist Badge 1. Have satisfactorily completed the Basic Airborne Course prescribed by GHQ AFP or Major Service Training Directives. 2. Have performed at least five (5) parachute jumps. 8.2.5.2 Senior Parachutist Badge 1. Must be an awardee of the Basic Parachutist Badge. 2. Have satisfactorily completed an advance Airborne (Jump Master) Course as prescribed by GHQ AFP or Major Service Training Directives. 3. Have performed at least thirty (30) parachute jumps, of which five (5) are simulated combat (tactical) jumps with combat equipment, and at least two (2) night jumps. 8.2.5.3 Master Parachutist Badge 1. Must be an awardee of the Senior Parachutist Badge. 2. Have satisfactorily completed the Advance Airborne (Jump Master) Course as prescribed by GHQ AFP or Major Service Training Directives. 3. Have performed as jumpmaster on at least one (1) combat jump. 4. Have performed at least sixty-five (65) parachutist jumps, of which twenty (20) are simulated combat (tactical) jumps with combat equipment, and at least four (4) night jumps, and at least two (2) combat jumps. 5. Description: The badge consists of the seal of the Republic of the Philippines with the standard colors and placed in the center between the pair of wings and under the parachute. A star is added to the Basic Parachutist Badge when the recipient is authorized to wear a Senior Parachutist Badge. A wreath is added to the Senior Parachutist Badge when the recipient is authorized to wear a Master Parachutist Badge.

R E S T R I C T E D

R E S T R I C T E D

297

6. The RP seal means that the risk of life of an airborne is done for the Republic of the Philippines; the pair of wings signifies airborne performance of duties; parachute signifies the outfit of being an airborne; the star symbolizes the higher degree or category of the badge; and the wreath, the highest category among the rest of airborne qualifiers. 8.2.5.4 AFP Parachutist Canopy Patch 1. Must be an awardee of at least the AFP Basic Parachutist Badge. 2. The patch may be sewn on the front right side of the oversea / garrison cap by all airborne qualified military personnel to include those from the Cadet Corps Armed Forces of the Philippines and those undergoing OCS Training. 3. Description: The Parachutist Canopy Patch consist of a black embroidered canopy 4 cm in height while the canopy’s edge is 3.5 cm spanned. The canopy has a background of olive drab embroidered cloth 5 cm in diameter with a dark green embroidered circumferential edge. 8.2.6 Inspector General’s Service (IGS) Badge 1. This is awarded by the Chief of Staff, AFP to IGS officers and enlisted personnel of the AFP. 2. To earn the badge, one must belong to the IGS; must be included in the IGS Eligibility List; and officers and enlisted personnel must have taken IGS training and performing IGS function. 3. Description: The badge is a sampaguita wreath in circular pattern with tip leaves meeting at the top of the badge. It superimposes a bolo and a spear that cross each other. A golden scroll rests on the sampaguita all the way from the left and right bases, with an inscription “Pagsisiyasat”, “Katarungan”, “Pagsusuri”. 4. The spear represents power and authority; the bolo stands for industry and labor; and the sampaguita wreath symbolizes purity, honesty, and integrity. The blades portion depicts cutting of red tape in the accomplishment of IGS tasks.

R E S T R I C T E D

R E S T R I C T E D

298

8.2.7 Adjutant General’s Service (AGS) Badge 1. This is awarded by The Adjutant General, AFP to all members of the AFP performing AGS functions. 2. For officers to be qualified for the badge, they should have taken AGS training and performing AGS functions, or for those who have not taken the AGS training but performing AGS function for at least one year. 3. For enlisted personnel to be qualified, they should have taken administrative course, NCO Course and performing other activities related to administrative functions for at least two (2) years or those who have no formal training but performed AGS functions for at least two (2) years. 4. Description: The badge is in the form of shield divided into three parts wherein in the upper portion is white superimposed by three stars in gold, the right flank is blue and the left flank is red. A plume in anodized silver is superimposed by the shield, with its quill and tail extended beyond the left and right edges of the badge. The wreath, made of laurel leaves, has its tendril crossed at the center base and laid upward convexly at the top portion of the shield. 5. The shield symbolizes the Adjutant General’s Service which is an accepted insigne of authentication; the three stars represents the three major Philippine regions; the gold color denotes majesty of thought and loftiness of ideals which AGS personnel are imbued; the white represents service, the blue for loyalty to principles; and the red for formal courage to do right and withstand pressure; the plume stands for AGS as a competent authenticating authority of the AFP; and the laurel leaves symbolize the authoritative and authentic general administrative services being rendered by the AGS personnel. 8.2.8 Tanglaw Badge 1. This is awarded to military and civilian personnel of the AFP by the Chief of Staff, AFP, Commanders of the Major Services, Unified Commands, Divisions, AFPWSSSUs, Separate Brigades and similar size units with TO rank of Brigadier General.

R E S T R I C T E D

R E S T R I C T E D

299

2. The personnel who fall under any of the following are eligible to wear the badge: a. Graduate of a TANGLAW course conducted under the auspices and supervision of the CRS AFP of not less than four (4) weeks in accordance with GHQ approved program of instructions (POI). b. Graduate of a TANGLAW course conducted by the Major Service Schools and AFPHDTC of not less than four (4) weeks in accordance with GHQ approved program of instructions (POI). c. Completed TANGLAW Mini Course of Echo Seminar under the auspices and supervision of the CRSAFP, Major Services and other AFPWSSUs and further actively participated in TANGLAW activities and projects for six (6) months. d. Actively participated with competence in policy formulation, planning, direction, supervision and/or implementation of TANGLAW activities, projects and programs for at least one (1) year. 2. Description: The medal is a disc bearing the Philippine flag, torch and enclosed by a ring in blue color with a caption “Tanod at Gabay ng Lahi ng Watawat”, all in white. The torch is placed vertically in the center of the lower half of the disc, partially superimposing the Philippine flag with five rays of the sun in gold. 3. The torch stands for enlightening the mind of the public; the Philippine flag symbolizes the country; the blue ring signifies the dignity of purpose; and the laurel leaves stands for honor. 8.2.9 AFP Home Defense Badge 1. This is awarded to military and civilian personnel of the AFP by the Chief of Staff, AFP, Commanders of Major Services and other units authorized to grant awards. 2. For military personnel, they must fall under any of the following: graduates of a Home Defense Course of not less than two (2) months duration conducted at Major Service level or higher; must have at least one (1) year satisfactory service with the Office for Home Defense Units, Office for Community Relations or Home Defense Centers/Community Relations Units; regular instructors in Home Defense courses; and others recommended for meritorious or outstanding achievement in home defense activities.

R E S T R I C T E D

R E S T R I C T E D

300

3. For civilians, they must have participated in a joint civic action or home defense activities with the AFP, whose services contributed substantially to the accomplishment of the AFP missions. 4. Description: The badge is circular, silver coated with blue enamel background. A wheel with twelve sprockets is placed centrally on the disc. An orange torch is placed at the middle of the disc. The wreath consisting of laurel leaves is placed in arc pattern at the base of the badge. The badge (for officer) is of the same design, except that the seal is superimposed on eight-pointed sunbursts. 5. The wheel stands for progress, the twelve sprockets signify the year-round and country-wide effort in attaining the objective; the torch stands for knowledge and communication; the shield refers to the military’s lofty ideals of ensuring the security of the state and its people; and the laurel leaves stand for meritorious and outstanding service. 8.2.10 Naval Aviation Badges 1. The Naval Aviation Badges are awarded by the PN Flag Officer-in-Command to commissioned officers of the Philippine Navy; to any military personnel assigned with the Naval Air Group; and to any military and civilian personnel, foreign and civilian dignitaries as recognized by the naval service.

2. On the Naval Aviation Badges, the wings symbolize aviation and air activities; the anchor signifies that awardees are under the naval command, while the seal of the Republic of the Philippines signifies that such deed is in honor to the country. Basic Naval Aviation badges are gold-plated metal wings 7 cm from tip to tip. Centerpieces vary to distinguish aviation specialties. 3. The naval aviation badge has three categories: 8.2.10.1 Naval Aviation Badge (Pilot Rating) 1. To earn this badge, one must be a Commissioned Naval Officer; must be a graduate of Basic Pilot Training conducted by the Philippine Navy or any Aviation/Flying School or Academy recognized by the PN; must have been checked out in any PN type aircraft; must be on flying status; and must have logged at least 175 flying hours in any fixed-wing type aircraft or 245 hours in any rotary winged type of aircraft.

2. Description: The Naval Aviation badge consists of the seal of the Republic of the Philippines in relief superimposing an anchor placed at the center. A gold-plated pair of wings is

R E S T R I C T E D

R E S T R I C T E D

301

placed on both sides of the seal. The anchor is an upright gold-plated relief resting midway at the span of the wings.

3. The badge is a bronze, gold-plated metal consisting of a fouled anchor surmounted by a shield, centered on the basic wings. The fouled anchor is 2.2 cm long. The height and width of the shield is 1.25 cm. 8.2.10.2 Naval Aircrew Badge 1. To earn this award, one must be assigned with the Naval Air Group; must be professionally and physically qualified to perform the skills required by appropriate and current naval aviation job qualification, must be required by orders to participate in regular and frequent aerial flights.

2. Description: The naval aircrew insignia is a gold-colored metal pin consisting of the basic wings with a circular center design and anchor with the block letter “AC” superimposed. The circle diameter is 1.9 cm; anchor height is 1.3 cm.

3. The Naval Aircrew Badge has a golden rope around the ring where a seal of the PN is placed at the center; while the Honorary Aviation Badge has an anchor superimposing on the ring surrounded by a rope. 8.2.10.3 Honorary Aviation Badge 1. This is awarded to individual military or civilian personnel who have contributed to the development and training of the Naval Air Group; to foreign dignitaries who are known exponents of aerospace science; to civilian dignitaries who have contributed to the development of aerospace technology; and to other personages whose achievements have directly or indirectly contributed to the advancement of aerospace technology. 2. Description: The same as that awarded to navy personnel. 4. Other categories of naval aviation badges:

8.2.10.4 Naval Flight Officer Badge

The naval flight officer badge is a bronze, gold-plated metal pin of two crossed fouled anchors surcharged with a shield,

R E S T R I C T E D

R E S T R I C T E D

302

centered on the basic wings. The fouled anchors are 2.2 cm long. The height and width of the shield is 1.5 cm. 8.2.10.5 Aerial Navigation Insignia

The aerial navigation insignia is a bronze, gold-plated metal pin consisting of the basic wings with a central device of two fouled anchors surmounted by a replica of a mariner’s compass, superimposed on a silver-colored disk. The fouled anchors are 1.6 cm; diameter of the disk 1.3 cm; diameter of the compass, 0.95 cm. 8.2.10.6 Naval Aviation Observer Insignia

The naval aviation observer insignia is a bronze, gold-plated metal pin consisting of the basic wings with a central device of an “O” circumscribing an erect plain anchor, both in bold relief, the outside diameter of the “O” is 1.9 cm; inner diameter, 1.4 cm; height of the anchor, 1.3 cm. 8.2.10.7 Combat Aircrew Insignia 1. To earn this award, one must be assigned with the Naval Air Group; must be professionally and physically qualified to perform the skills required by appropriate and current naval aviation job qualification, must be required by orders to participate in regular and frequent aerial flights. 2. The combat aircrew insignia is an oxidized silver-colored, winged metal pin; with a gold-colored circular shield with a superimposed fouled anchor; the word “AIRCREW” in raised letters on a silver-colored background below the circular shield; above the shield is a silver-colored scroll; the insignia measures 5 cm from wing tip to wing tip; circle on the shield, 0.8 cm in diameter. Gold stars, up to a total of three, as merited, will be mounted on the scroll; necessary holes being pierced to received them. A silver star may be worn in lieu of three gold stars.

8.2.11 PAF Aviation Badge 1. This is awarded by the Commanding General, PAF to members of the Philippine Air Force for requirements as prescribed in the Philippine Air Force Manual 17-1, dated July 1978, Aircrew Management. 2. Description: The Command Pilot Badge has the figure of an eagle in airborne position, superimposed by an equilateral triangle consisting of sun at the center and three stars placed in each corner. On both

R E S T R I C T E D

R E S T R I C T E D

303

tops of the wings stand laurel leaves in circular pattern with five-pointed stars at the center.

3. The Senior Pilot Badge is almost the same as the Command Pilot Badge, but does not have laurel leaf and five-pointed stars. For the Pilot Badge, it does not have the laurel leaf and five-pointed star. The Service Pilot Badge has an equilateral triangle, the sun, three stars and the wing of the eagle only. 8.2.12 Avionics/Aircraft Maintenance Officer Specialty Badge 1. This is awarded by the Commanding General, PAF to officers of the Philippine Air Force and to members of the other armed services as recognized by the Philippine Air Force.

2. The badge has five (5) categories: 8.2.12.1 Qualified Avionics/Aircraft Maintenance Officer Specialty Badge 1. This is warded to an officer who has satisfied the specialty qualifications for qualified level. To earn the Qualified Avionics/Aircraft Maintenance Officer Specialty Badge, an officer must have been duly awarded a primary AFSC 4344 or its USAF equivalent AFSC 4024 or 4944, respectively; completion of an aircraft maintenance course or avionics system maintenance course; must have been assigned to a unit involved in aircraft/avionics maintenance activities for a minimum of 18 months and designated aircraft maintenance or avionics officer; bachelor degree, preferably engineering or management; and with a grade spread from Captain to Major.

2. Description: The badge for Qualified Avionics is a basic silver wing, which denotes involvement in flying activities, with a gear representing maintenance; lightning streak representing avionic system and lozenge representing PAF. 8.2.12.2 Senior Avionics/Aircraft Maintenance Officer Specialty Badge Awarded to an officer who has satisfied the specialty qualifications for staff level. For Senior Avionics/Aircraft Maintenance Officer Specialty Badge, an officer must have been awarded a primary AFSC 4316 or 3216, or its USAF equivalent AFSCs 4016 or 4036, respectively; must have 5 years experience in aircraft/avionics maintenance assignment as aircraft or Avionics Staff Officer; must have completed an

R E S T R I C T E D

R E S T R I C T E D

304

advance aircraft maintenance or advance avionics course; and must have a grade from Major to Lt Col. 8.2.12.3 Command Avionics/Aircraft Maintenance Officer Specialty Badge Awarded to an officer designated as director or commander and who has satisfied the specialty qualifications for commander/director level. For Command Avionics/Aircraft Maintenance Officer Specialty Badge, an officer must have been awarded the Aircraft Maintenance or Avionics Staff Level Specialty Badge; must have been awarded primary AFSC 4316 or occupying positions only designated as Commander/Director of large consolidated maintenance unit, or serving as Director of Material, AFSC 0046, also as Senior Maintenance/Avionics Advisor Commanders, and Air Staff chiefs from wing level and above; must have a minimum of 12 months experience in aerospace maintenance director assignment, including directing and monitoring aerospace maintenance and related material program; must have completed an Avionics/Aircraft Maintenance Staff Course or of a senior professional military education; and must have a grade from Lt Col to Col. 8.2.12.4 The Senior Avionics Badge

It is a basic silver wing with a star atop the gear. 8.2.12.5 The Command Avionics

It is a basic silver wing with sampaguita crown around the star on top of the gear in the middle of the wings. 8.2.13 UOG Seal Team Badge 1. This is awarded by the Flag Officer-in-Command, PN to military and civilian personnel of the AFP. 2. To earn the badge, the personnel must be a regular member of the PN; a graduate from the Basic Underwater Operations/Sea course; and must be physically, psychologically and professionally fit to perform diving skills and combat duties. 3. Description: The badge is gold-plated spherical triangle with horizontal base and silver star on each side. A pair of silver wings superimposed the triangle at the center and crowned shark rests horizontally on the center of the spread pair of the wings. The trident and an M16 are crossed at 90 degrees and superimposed by the shark.

R E S T R I C T E D

R E S T R I C T E D

305

4. The triangle represents the three major islands of the country; the wings stand for professionalism in the performance of duty; the crown for superiority in the field; the trident for naval power; the M16 means its counterpart as guardian of the sea; and the shark stands for sea activities. 8.2.14 UOG/Scuba Diver’s Badge 1. This is awarded by the Flag Officer-in-Command, PN to officers and enlisted personnel of the Philippine Navy. 2. To qualify for the badge, a military personnel must have completed and graduated from the prescribed UOG Scuba Diver’s Course; professionally fit to perform scuba diving. 3. Description: The badge is in the form of facemask and rubber hood in silver. The double hose regulator connected to the mouthpiece forms a circular pattern at the left and right flanks of the badge. 4. The hooded mask symbolizes the diver’s ability to explore the depth of the ocean; the hose and mouthpiece stand for the stamina of the diver to sustain life underwater. 8.2.15 Election Duty Badge 1. This is awarded by the Chief of Staff, AFP to AFP personnel and to ROTC Cadets/Cadette who are duly deputized by COMELEC for election duty, or for service rendered that contributes to the honest, orderly and peaceful election. 2. Description: The badge is made up of brass embossed with four distinct colors namely: blue represents honest election, green represents orderly election, white represents peaceful election and red represents the election process. The rising sun on the top of the rectangular brass depicts the vision of the deputized in choosing national leaders envisioned to bring hope to the social, political and economic stability in the country. 8.2.16 Explosive Ordnance Disposal (EOD) Badge 1. This is awarded to graduates of the Explosive Ordnance Disposal Course from the major service training commands. He must be physically and professionally fit to perform EOD functions.

2. Description: The basic EOD insignia is an oxidized silver pin consisting of a 2.5 cm high shield with a conventional drop bomb, point down, and four lightning bolts, all in front of a laurel wreath 4.4 cm wide.

R E S T R I C T E D

R E S T R I C T E D

306

3. The Senior EOD insignia is the same as the Basic EOD insignia, but with a 0.55 cm star on the drop bomb. 4. The Master EOD insignia is the same as the Senior EOD insignia with a star in a laurel wreath above the shield.

8.2.17 Enlisted Personnel Administrative Assistant Course (EPAAC) Badge 1. This is awarded by the Chief of Intelligence Service, AFP to enlisted personnel who graduated from the course at Special Intelligence Training School, ISAFP and have been posted at various ODAFA offices. 2. Description: The badge is in the form of earth globe with a sphinx occupying the center of tri-color triangle representing the three major services surrounded by a garland of laurel leaves representing pride, honor, and distinction. The three stars inside the triangle stand for the three geographical areas of the archipelago. The earth globe stands for the strategic location of the ODAFA posts distributed worldwide while the sphinx means intelligence. 8.2.18 Service Medals and Ribbons 1. Ribbons for ribbon bars will be of the same material as the medal’s suspension ribbon. Ribbon bars authorized for awards that have no medal such as the Presidential Unit Citation, Martial Law, EDSA Revolution and People Power II will be of the material prescribed in applicable military specifications. 2. Each ribbon bar will be 1 cm high and 3.5 cm wide (same as the width of the medal’s suspension ribbon). Foreign ribbon bars (including those with devices) which have been authorized by regulation may be worn only if they can be adapted to meet regulation height requirement and of the standard ribbon bar. 3. Ribbon bars will not be impregnated with preservatives that change the appearance of the ribbon, nor will they be worn with any type of transparent coverings. 4. Ribbons bonded to a flat frame instead of a metal bar are approved for wear at the option of the individual. These ribbon bars lie flatter than the standard ribbon bars and may include magnetic fasteners in lieu of clutches for attaching to the uniform.

R E S T R I C T E D

R E S T R I C T E D

307

5. Anahaw leaves, spearhead devices, stars and other attachments will be worn as prescribed in the regulations. 8.3 MILITARY AWARDS AND THEIR ORDER OF PRECEDENCE 8.3.1 Medal of Valor 1. To whom awarded: Military personnel of the AFP including recognized guerilla. 2. By whom awarded: President of the Philippines. 3. Requirements: Action involving actual conflict with enemy where the awardee distinguished himself conspicuously by gallantry and intrepidity at the risk of his life above and beyond the call of duty. In order to justify an award for the Medal of Valor, an officer or enlisted man must have performed an action or a deed of personal bravery or self-sacrifice above and beyond the call of duty so conspicuous as to distinguish himself above his comrades. 4. Symbolism and Significance a. Sea Lion. Represents the awarding authority. b. Philippine Sun. Represents the eight provinces of the Philippines that fought for our freedom and independence. c. Four Blue Ripples. Signify GHQ and three (3) Major Services of the AFP. d. Crossed Swords. Symbolize conflict with an enemy in the defense of the nation. e. Three Stars. Represent Luzon, Visayas, and Mindanao. f. Wreath of Sampaguita Buds and Leaves. Symbolizes highest honor for the courage and gallantry displayed in the achievement of a meritorious act. g. Red. Signifies bravery. h. White. Stands for sincerity in the performance of duty. i. Green. Represents nobility in the service.

R E S T R I C T E D

R E S T R I C T E D

308

8.3.2 Distinguished Conduct Star (DCS) 1. To whom awarded: Military personnel of the Armed Forces of the Philippines and friendly allied forces. 2. By whom awarded: Chief of Staff, AFP. 3. Requirements: For acts of conspicuous courage and gallantry in the face of an armed enemy. To warrant an award of DCS, a person must perform an act of heroism so notable and involving the risk of life so extraordinary as to set himself apart from his comrades. 4. Symbolism and Significance: a. Bow and arrows and cannons supporting the Sea Lion on a disc, signify strong defense made by the awardees for the welfare of the nation. b. Red Star. Symbolizes heroism and gallantry displayed in the face of an armed enemy. c. Garland of Sampaguita Buds and Leaves. Represents high honors for acts displayed. d. Wreath of Sampaguita Buds and Leaves. Stand for glorious victory/accomplishments conspicuously done. 8.3.3 Distinguished Service Star (DSS) 1. To whom awarded: Officers of the Armed Forces of the Philippines. 2. By whom awarded: Chief of Staff, AFP. 3. Requirements: For eminently meritorious and valuable service in a position of major responsibility. The performance of duty must be such as to merit recognition by the service as exceptional. A superior performance of duties normal to the grade, branch, specialty of assignment, and experience of an individual are not adequate basis for this award. The accomplishment of the duty should have been completed prior to submitting a recommendation or, if the person being recommended has been transferred prior to completion, the accomplishment must have progressed to what may clearly be determined to be exceptional or significant.

R E S T R I C T E D

R E S T R I C T E D

309

4. Symbolism and Significance: a. Ring. Circumscribing the seal symbolizes eminently meritorious and valuable services to the Republic of the Philippines. b. Star. Stands for the conspicuously meritorious achievement. c. Wreath. Signifies the glory for such endeavor. 8.3.4 Gold Cross 1. To whom awarded: Military personnel of the Armed Forces of the Philippines. 2. By whom awarded: Chief of Staff, AFP, Commanders, Major Services and Unified Command. 3. Requirements: For gallantry in action not warranting the award of DCS. 4. Symbolism and Significance: a. Head of Manuel L Quezon. Means that the achievement is worth a presidential endeavor. b. Blue Background. Represents sincerity and devotion to duty. c. Laurel Garland. Stands for the honor given for such gallantry and courage displayed. d. Golden Cross. Symbolizes the risk of life and sacrifices in rendering a conspicuous act or acts. e. Grooved Border. Signifies the brilliantly shining performance.

R E S T R I C T E D

R E S T R I C T E D

310

8.3.5 Philippine Legion of Honor (PLOH) 1. Degree of Chief Commander To whom awarded: a. President of the Republic of the Philippines and high-ranking foreign military officers. b. Foreign Chief of State, Prime Minister or Head of Government, other persons holding high and respectable positions whose accomplishments can seldom be surpassed such as jurist, parliamentarian, statesman, diplomat, journalist and scientist. 2. Degree of Commander To whom awarded: a. Chief of Staff, Vice Chief of Staff, and commanders of Major Services, AFP or their equivalent in the Armed Forces of friendly foreign nations. b. Presiding Officer of Congress/Senate, the Chief Justice of the Supreme Court and the Heads of Departments or their equivalent in friendly foreign nations. 3. Degree of Officer To whom awarded: a. Commissioned and non-commissioned officers and their equivalent in friendly foreign nations. b. Civilian personages of utmost prestige whether in or outside the government service. 4. Degree of Legionnaire To whom awarded: a. All other military personnel of the AFP and friendly foreign nations. b. All Filipino or foreign civilian.

R E S T R I C T E D

R E S T R I C T E D

311

5. By whom awarded – President of the Republic of the Philippines. 6. Requirements: a. Degree of Chief Commander 1) Military – Eminently meritorious and valuable service rendered in a position of major responsibility. The performance of duty must merit exceptional recognition. A superior performance of the moral duties of a position shall not alone justify the award. 2) Civilian – Eminently meritorious and valuable service rendered to the Philippines that merit official recognition by the government. b. Degree of Commander – Eminently meritorious and valuable service rendered in a position of major responsibility but in a lesser degree of category not warranting the award of the Degree of the Chief Commander. c. Degree of Officer 1) Military – Exceptionally meritorious conduct in the performance of outstanding service below that for which the DSS is usually awarded. 2) Civilian – Outstanding service to the Philippines that merits official recognition by the government. d. Degree of Legionnaire 1) Military – Exceptionally meritorious conduct in the performance of outstanding service but to a lesser extent not warranting the award of the Degree of Officer or for meritorious service of more value than that for which the MMM is usually awarded. 2) Civilian – Outstanding service to the Philippines that merits official recognition by the government but to a lesser category not warranting the award of the Degree of Officer.

R E S T R I C T E D

R E S T R I C T E D

312

8.3.6 Outstanding Achievement Medal (OAM) 1. To whom awarded and requirement: Military and civilian personnel of AFP and citizens of the Philippine Republic, members of the Armed Forces and civilian personages of friendly foreign nations for distinguished or extraordinary achievement or service in the advancement of science, socio-economic, technical and/or military fields related to national defense and for public service of the highest order. 2. By whom awarded: Secretary of National Defense. 3. Symbolism and Significance: a. Star – gold-plated conventionalized star having a ridge between pendants. Each vertex is attached to the wreath. b. Wreath – is gold and each tendril has twelve (12) pairs of laurel leaves. It encircles the star. 8.3.7 Gawad Sa Kaunlaran 1. To whom awarded: Any citizen of the Republic of the Philippines. 2. By whom awarded: Chief of Staff, AFP, Commanders of Major Services and Unified Commands. 3. Requirements: a. For conspicuously meritorious and valuable achievement in the pursuit of socio-economic and other non-combat activities or conspicuously exceptional service, which have contributed immensely in accomplishing the peaceful objectives of the AFP or in improving the quality of life of the people within the military establishment. b. It shall be awarded neither without regard to position held nor to the duration within which the cited achievements or service is accomplished. Severance from or actual completion of an enterprise is not a consideration, rather, the conspicuity of the achievement is deemed to be end in itself deserving recognition. 4. Symbolism and Significance: a. Star – Stands for the achievement of service.

R E S T R I C T E D

R E S T R I C T E D

313

b. Sun rays – Symbolize the conspicuity of the achievement. The eleven (11) rays represent also the eleven (11) basic needs of man to any of which the achievement or service might have been directed. c. Blue Background – Signifies nobility of purpose, which though subdued and intrinsic in nature, certainly adds to the conspicuity of any achievement whenever such nobility is made known.

d. Laurel leaves – Stand for the peaceful nature of the achievement or service – the leaves also number eleven (11), this number having the same connotation as the sunrays.

8.3.8 Kagitingan sa Barangay

1. To whom awarded: Members of the CAFGU Active Auxiliary or other civilian officials.

2. By whom awarded:

a. Lakan - President of the Philippines.

b. Datu - Secretary of National Defense.

c. Maginoo - Chief of Staff, AFP.

3. Requirements:

a. Lakan. For participation in action involving actual conflict with an enemy, distinguishing oneself conspicuously by gallantry and at the risk of life beyond the call of duty. One must perform a deed of personal bravery or self-sacrifice so conspicuous as to clearly distinguish him from other members.

b. Datu. Acts of conspicuous courage and gallantry in the face of an armed enemy. He must perform an act of heroism so notable involving risk of life as to set him apart from the other members.

c. Maginoo. For gallantry in action not warranting the award of Lakan and Datu. Awarded to recognize a single act of merit or meritorious service accomplished with distinction by any civilian official either in duty responsibility or in direct support of military operations.

4. Symbolism and Significance:

a. Silver Shield. Symbolizes protection from evils of peace.

R E S T R I C T E D

R E S T R I C T E D

314

b. Conventionalized Sun. Represents the first eight (8) provinces that took up arms against Spain.

c. Three (3) Stars. Represent Luzon, Visayas and Mindanao.

d. Narra Leaves. Stand for national strength.

8.3.9 Bronze Cross

1. To whom awarded: Military and civilian personnel of the AFP and Armed Forces of friendly nations.

2. By whom awarded: Chief of Staff, AFP, Commanders of Unified Commands, Commanders of Major Services/AFPWSSUs, Division, Brigades and equivalent in the PAF and PN.

3. Requirements:

a. Heroism not involving actual conflict with an enemy.

b. Performance or act of heroism involving risk of life under conditions other than those of conflict with the enemy.

4. Symbolism and Significance:

a. Red – stands for courage/bravery in the performance of duties.

b. White – stands for sincerity to service.

c. Blue – stands for nobility of ideals.

8.3.10 Military Merit Medal

1. To whom awarded: Military personnel of the Armed Forces of the Philippines.

2. By whom awarded: Chief of Staff, AFP, Unified Commands Commanders, Major Services Commanders, and major subordinate units with TO rank of Brigadier General or higher.

3. Requirements:

a. Heroic or meritorious achievement for service not involving participation in combat in connection with military operations against an enemy of the Philippines.

R E S T R I C T E D

R E S T R I C T E D

315

b. For single act of meritorious service either in a duty responsibility or in direct support of military operations.

c. The required achievement or service for award of MMM is less than that required for award of DSS, nevertheless it should be accomplished with distinction.

d. It maybe posthumously awarded to members of the AFP, who while serving in any capacity in the AFP, are killed in action by the enemy of the Philippines or in direct result of an act by the enemy after performing meritorious services to the AFP.

4. Symbolism and Significance:

a. Conventionalized Philippine Sun. Represents the Philippine Island.

b. Three Stars. Represent the three (3) major islands of the Republic of the Philippines.

c. Wreath. Signifies the honors received for such display of acts and accomplishments.

8.3.11 Silver Wing Medal

1. To whom awarded. Military personnel of the Armed Forces of the Philippines.

2. By whom awarded: Chief of Staff, AFP, Major Service Commanders, Unified Command Commanders.

3. Requirements: Meritorious achievement while participating in aerial flight and single act of merit or for participation in sustained operational activities against the enemy while in an aerial flight.

4. Symbolism and Significance:

a. Airborne Hemet – It is a relief with paraphernalia in silver and placed at the center reckoning from the nombril point. It superimposes the three (3) arched bands at the center base and center of the diamond field.

b. Pair of Silver Wings – It is a relief in silver wherein each wing occupies the dexter and sinister flanks, respectively. Each wing consists of seven (7) feathers. It superimposes the diamond field.

R E S T R I C T E D

R E S T R I C T E D

316

c. Diamond fields – Each nombril field in silver is bounded by an embossed borderline. The smaller diamond field is placed over the bigger one.

d. Stars – Three (3) silver stars in relief occupy the chief of the medal in an inverted triangular formation. The middle star superimposes the borderline’s vertex of the smaller diamond field and two (2) stars occupy the dexter and sinister chiefs, respectively.

8.3.12 Military Commendation Medal

1. To whom awarded: Military personnel of the Armed Forces of the Philippines.

2. By whom awarded: Unified Command Commanders, Major Service Commanders, Commanders of AFPWSSUs, Divisions, Brigades or equivalent units in the PAF and PN.

3. Requirements:

a. Demonstrated exemplary efficiency, devotion and loyalty to duty assignments.

b. Five letters of commendation of different accomplishments and within the same command line are convertible to one (1) MCM.

4. Symbolism and Significance:

a. Star. Symbolizes a single notable achievement in line of duty.

b. Three (3) Discs. Represents the three (3) major islands of the Philippines.

c. Wreath. Stands for the high appraisal of the good deed.

8.3.13 Wounded Personnel Medal

1. To whom awarded: Military personnel of the Armed Forces of the Philippines and civilians serving with the Armed Forces of the Philippines.

2. By whom awarded: Commanders of Major Subordinate Units of Major Services down to Battalion Commanders or its equivalent units in the PAF and PN. In the case of combat patient evacuated to AFP hospitals, the CO is authorized to award this medal.

R E S T R I C T E D

R E S T R I C T E D

317

3. Requirements:

a. Wounded in action against an enemy or as direct result of an act of the enemy provided such wound necessitates treatment by a medical officer.

b. For having been killed in an action against an enemy of the Philippines or as direct result or an act of the enemy.

c. No more than one award shall be made for more than one wound or injury received at the same instant or from the same missile, force explosion or agents.

d. A wounded personnel medal shall be issued to the next of kin of each person entitled to the posthumous award. It shall be automatically made by the Adjutant concern upon receiving a report of death indicating entitlement notwithstanding presentation of a wounded personnel medal to the deceased prior to death.

4. Symbolism and Significance:

a. Disc with the relief head of General Gregorio del Pillar. Represents the achievement that resulted in the wounding of the awardee by an enemy.

b. Cross. Signifies the risk of life while in combat.

c. Wreath. Symbolizes the honor for such an endeavor.

d. Green. Stands for nobility and devotion to duty.

8.3.14 Military Civic Action Medal

1. To whom awarded: Military and civilian personnel of the Armed Forces of the Philippines and friendly foreign nations.

2. By whom awarded: Chief of Staff, AFP, Unified Command Commanders and Commanders of Major Services, AFPWSSU’s, Divisions/Brigades or equivalent units in the PAF and PN.

3. Requirements: Meritorious achievement in the field of civic action in a duty responsibility or in direct support of military operations.

4. Symbolism and Significance:

a. Blue. Lofty ideals of security and represents the Philippine skies.

R E S T R I C T E D

R E S T R I C T E D

318

b. Red. Emblem of knowledge and communication.

c. White. Emblem of progress and represents beauty and aspiration.

d. Green. Emblem of hope and represents richness of the nation.

8.3.15 Armed Forces Conduct Medal

1. To whom awarded: Enlisted personnel of the Armed Forces of the Philippines.

2. By whom awarded: Unified Command Commanders, Major Service Commanders, Commanders of AFPWSSUs, Divisions/Brigades and/or equivalent units in the PAF and PN.

3. Requirements: Must have served two (2) successive enlistment terms with no records of punishment, conviction or derogatory remarks whatsoever.

4. Symbolism and Significance:

a. Philippine Sun. Signifies the Philippines and the first eight (8) provinces that revolted against Spain.

b. A triangle and three stars. Represent the three major islands of the Philippines.

c. Wreath – Stands for meritorious and outstanding achievements.

8.3.16 Sagisag ng Ulirang Kawal

1. To whom awarded: Military personnel of the Armed Forces of the Philippines.

2. By whom awarded: Chief of Staff, AFP, Unified Command Commanders and Major Service Commanders.

3. Requirements: For having distinguished ones’ self conspicuously in the performance of non-military activities and community development programs and other related activities, which merit public recognition.

4. Symbolism and Significance:

a. Bust of the Soldier. Indicates that the awardee is a model soldier.

R E S T R I C T E D

R E S T R I C T E D

319

b. Clasped Hands. Symbolizes the effort in winning the confidence of the civilians on the trustworthiness of the military.

c. Heart. Symbolizes the concern of the military in its sincere and honest effort in extending assistance to fellowmen who may be peace loving citizens or misguided elements of the society.

d. Triangle. Symbolized by the luminous sparkle of the three (3) bronze stars depict Luzon, Visayas and Mindanao.

8.3.17 Long Service Medal

1. To whom awarded. Military personnel of the Armed Forces of the Philippines.

2. By whom awarded: Chief of Staff, AFP and Major Service Commanders.

3. Requirements: Upon completion of twenty (20) years of faithful and honorable service with the AFP, and for each additional five (5) years, one bronze star shall be affixed to the ribbon. Computation of service with the AFP shall be in accordance with the provisions of PD 1638, as amended.

4. Symbolism and Significance: The cross supporting the RP seal represents the services rendered by the individual to the Republic of the Philippines.

5. Requisition of medals for twenty years of active service and giving name of officer/enlisted person for whom the medal is intended should be made to the Quartermaster General, AFP. The date of appointment of officer or the date of enlistment of the individual and the date on which twenty years of active service was completed should be stated.

8.3.18 Anti-Dissidence Campaign Medal and Ribbon

1. Eligibility. For AFP personnel in the active service who have participated with a unit undertaking an operation, campaign or move against the dissidents between 30 June 1946 and terminal date to be designated later.

2. Symbolism and Significance. Battle Stars on the Campaign ribbon shall be affixed or participation in each major battle engagement announced in General Orders as entitled to an additional award, a small bronze star of the QM issue type.

R E S T R I C T E D

R E S T R I C T E D

320

8.3.19 Disaster Relief and Rehabilitation Operation Ribbon (DRROR)

1. For AFP personnel in the active service who have participated in undertakings involving rescue of relief and rehabilitation operations connected with typhoons, floods, earthquakes, conflagration and other disasters or calamities for any period during and after said disaster or calamities.

2. Symbolism and Significance:

a. Violet – Signifies calamity/disaster.

b. Red – stands for noble objective that characterizes the relief and rehabilitation operations conducted during and immediately after the calamity and disaster.

c. Green – Signifies restoration of everything to normal condition as shown by the growth of vegetation, reconstruction of houses and public works and bringing life to normal.

8.3.20 Philippine Republic Presidential Unit Citation Badge

1. To whom awarded: Units of the Armed Forces of the Philippines.

2. By whom awarded: President of the Republic of the Philippines.

3. Requirements: The unit must have distinguished itself with exceptional loyalty and fidelity, extraordinary accomplishment in the field of law enforcement in maintaining the security of the land, participation in relief and rehabilitation and advancement of socio-economic and political goals.

8.3.21 Distinguished Navy Cross 1. Eligibility a. Awarded by the Chief of Staff, AFP, Unified Command and Major Service Commanders to military personnel of the AFP who are serving in any capacity with the Philippine Navy, for distinguished heroism or extraordinary achievement while participating in naval operations. b. To justify the award for heroism, the deed must be evidenced by voluntary action in the face of great danger above and beyond the call of duty. For extraordinary achievement, the deed must be so exceptional and outstanding.

R E S T R I C T E D

R E S T R I C T E D

321

2. Description a. The medal has the replica of sea lion holding a dagger in its right hand and sampaguita in the left, wholly superimposed on the anchor in relief and in gold. Encircling the blue disc is a garland consisting of the laurel leaves superimposing the cross, which is in gold with sharp edges at the end of its flange. The grooved border is in gold and placed between the flanges below the level of the garland. The sea lion over an anchor is the national symbol of the sea-borne people. Sampaguita stands for dignity; the navy blue background is for sincerity and devotion, the garland for gallantry; the golden cross stands for risk of life and sacrifice; and the grooved border stands for shining performance. b. The ribbon has three white stripes in the center interlined alternately against the light blue background.

8.4 LARGE AND MINIATURE AWARDS MEDALLIONS

1. With the exception of those decorations worn pendent from the neck, medals will be arranged in horizontal line in order of precedence from the wearer’s right. The bottom edge of all medallions will be aligned.

2. Miniatures of all medals entitled are required for officers/SNCO’s when evening dress uniforms are worn. The Medal of Honor will NOT be mounted or reproduced in miniature.

3. A person in receipt of an award from a foreign government which includes stars, sashes, orders, or devices similar to, or required to be worn differently than AFP awards, may wear the medal or ribbon bar as a courtesy to that country. Foreign medals and ribbon bars will be worn as nearly as is practicable to the foreign country’s regulations; however, at least one local award must be worn when a foreign award is worn.

8.5 AWARDS OF MILITARY SOCIETIES AND OTHER ORGANIZATION

Miscellaneous awards and badges may be worn on military personnel uniform at the holder’s option, unless otherwise ordered, and provided no awards, decorations, badges, or breast insignia are worn at the same time. Honorary badges are worn centered on the left pocket flap or as prescribed in the regulations.

8.6 MINIATURES

1. The Medal of Valor and miniature medals will be worn on all evening dress uniforms. When miniature medals are worn, no ribbons will be worn.

R E S T R I C T E D

R E S T R I C T E D

322

2. On male officers’ evening dress jackets, miniature medals will be centered on the left front panel of the jacket midway between the inner edge and the left armhole seam, with the top of the holding bar on line with the second blind buttonhole.

3. On the male SNCO’s evening dress jacket, the miniature medals will be centered on the left lapel with the top of the holding bar approximately 2.5 cm below the left notch. If regulation size holding bars will not fit on the lapel, medals may extend beyond the lapel edge onto the jacket’s left breast.

4. On the women’s evening dress jacket, miniature medals will be placed centered on the left lapel with the top of the holding bar at the lapel’s widest part. If regulation size holding bars will not fit centered on the lapel, medals may extend beyond the lapel’s edge onto the jackets left breast.

5. Wear on Civilian Evening Clothes

a. Male. Miniature medals may be worn on the left lapel of the civilian evening coat on ceremonial occasions, but only when strictly appropriate to the occasion. On the tuxedo coats, miniatures will be worn centered on the wearer’s left lapel, placed horizontally and 2.5 cm below the end of the collar gorge. The top edge of the holding bar will completely cover the buttonhole. If current styles preclude wearing on the lapel, miniatures will be placed in the same relative position as if there was a lapel.

b. Female. Miniature medals may be worn on civilian evening attire on ceremonial occasions, but only when strictly appropriate to the occasion. Miniatures will be worn in approximately the same position where they would be worn on the uniform. If current styles preclude the wearing of miniatures in a place approximating the position where they would be worn on the uniform, miniatures will not be worn.

c. If a second row of miniatures is worn, it will be placed 2.5 cm below the first row. In no case will more than two rows of miniatures be worn on civilian attire.

8.7 DECORATIONS, MEDALS, RIBBON BARS, AND LAPEL BUTTONS WORN ON CIVILIAN CLOTHING

1. Decorations, medals, appropriate ribbon bars, or lapel buttons may be worn on civilian clothes at the individual’s discretion. Individuals should ensure that the occasion and the manner of wearing would not reflect discredit on the award.

2. Miniature medals may be worn with civilian evening dress.

R E S T R I C T E D

R E S T R I C T E D

323

3. The Medal of Valor may be worn with civilian evening dress. It will be worn around the neck with the ribbon under the coat jacket and the medallion hanging about 2.5 cm below the bow tie.

4. Miniature replicas of ribbons made in the form of enameled lapel buttons, or ribbons made in rosette form, may be worn on the left lapel of civilian clothes except civilian evening dress.

8.8 WEARING OF MEDALS

8.8.1 Medal of Valor

On the officer’s evening dress and all other dress uniforms, the Medal of Valor will be worn around the neck with the ribbon under the coat or jacket collar. The medallion will emerge at the opening between the collar hook and the top button of the coat or jacket, and hang below the bottom edge of the collar. On the SNCO evening dress uniform, the Medal of Valor will be worn around the neck with the ribbon under the jacket collar. The medallion will hang below the men’s bow tie.

8.8.2 Large Medals

1. On the men’s dress coats, large medals will be worn centered above the left breast pocket with the upper edge of the holding bar on a line midway between the first and second buttons of the coats.

2. On the women’s dress coats, one row of large medals will be placed centered over the left breast pocket with the top of the holding bar about 2.5 cm above a horizontal line tangent to the highest part of the pocket. When two or more rows of medals are worn, the top of the holding bars of the bottom row of the medals will be approximately 0.6 to 2.5 cm above a horizontal line tangent to the highest point of the pocket. The holding bars of the top row of medals will be at least 0.3 cm below the collar. If necessary the medals may be shifted from center towards the armhole seam between 0.6 and 1.3 cm so that no more than one-third of any medal is covered by the coat lapel.

8.8.3 Wearing Ribbon Bars

Ribbons bars shall be grouped in rows of three with the highest award at the top row occupying the rightmost portion and the lowest award at the lowest row occupying the leftmost part. Ribbon bars shall be positioned in their order of precedence from the wearer’s right to the left, the highest medal placed at the right part and lowest medal at the leftmost part. The bottom edge of the lowest row shall be 0.30 cm above the top edge of the left pocket. Women will wear these ribbons on the left side of the coat front in about the same vertical position as worn with dress and service uniforms. Military personnel who were not yet awarded large medals, but who are

R E S T R I C T E D

R E S T R I C T E D

324

entitled to wear a ribbon(s) for which no medal is authorized will wear such ribbon(s) over the left breast pocket as described above. The wearing shall be further discussed below.

8.9 WEARING OF BADGES

8.9.1 Regulations for Wear

1. Marksmanship badges will not be worn with the evening dress, utility, and camouflage maternity work uniforms. Commanders may prescribe marksmanship badges for wear on all other uniforms. Unless otherwise prescribed by the commander, wearing marksmanship badges is at the option of the individual.

2. Badges are centrically placed above the left pocket with 0.30 cm spacing between the holding bars of each badge (0.30 cm for women to ensure proper alignment with the ribbons and the edges of the pocket). There is no order of precedence of badges except those badges whose placement are prescribed in this Code.

3. On women’s coats with horizontal pockets, ribbons will be worn as prescribed above. To determine the proper location for marksmanship badges on women’s coats with slanted upper pockets, a horizontal line tangent to the highest point of the pocket is considered the top of the pocket. On women’s shirts, badges are placed even with or up to 5.1 cm above the first visible button and centered so that they are in about the same position as on the coat. On the maternity tunic, badges are placed so that they are in about the same position as on the service coat. On the maternity shirt, badges are worn in the same manner as on the standard shirt, except they are placed 1.3 to 2.5 cm above the horizontal yoke seam stitching and may be adjusted to the individual to present a military appearance.

4. Only one badge for a specific type may be worn at any time. No more than three badges will be worn at anytime. Military personnel entitled to more than three awards may select only three to be worn.

5. When ribbon bars are worn with badges, the lowest row of ribbons is 0.30 cm above the top edge of the marksmanship.

6. Badges are worn on the left breast, above the decorations and service medals. Substitutes are not authorized in lieu of badges. Occupational Specialty Badges shall be worn 0.30 cm atop the line of the ribbons or other badges or 0.30 cm above the top seam of the left pocket if worn without ribbons and other decorations. Eligibility Badges shall be worn centered on the left pocket while the highest educational badge shall be centered on the right pocket whenever appropriate, necessary or required.

R E S T R I C T E D

R E S T R I C T E D

325

7. Honorary Badges are worn centered on the left breast pocket flap or as prescribed in this Code.

8.10 RIBBONS

8.10.1 Wearing of Ribbons

1. Military personnel will wear all ribbons to which they are entitled on service and dress coats. Ribbons will be worn on the dress coats only as authorized.

2. When the dress or service uniforms are worn, the wearing of ribbons on shirts is at the individual’s option unless the commander prescribes that ribbons be worn. If ribbons are worn on these uniforms, all ribbons, or personal decorations and the good conduct medal, may be worn at the individual’s option.

3. Ribbon bars will be worn on a bar or bars and pinned to the coat or shirt. No portion of the bar or pin will be visible.

4. Ribbon bars are normally worn in rows of three; however; rows of four may be worn when displaying a large number of awards. Two-ribbon rows may be worn when ribbon bars are worn in successively decreasing rows. Two-ribbon rows may also be worn by female personnel when a three-ribbon row would not lay flat or would extend too close to the armhole seam.

5. When more than one row of ribbon bars is worn, all rows except the uppermost will contain the same number of ribbons. If the number of ribbons worn causes the ribbons to be concealed by the service coat lapel (one-third or more of a ribbon concealed), ribbon bars will be placed successively in decreasing rows; e.g., 4-ribbon rows, 3-ribbon rows, 2-ribbon rows, single ribbon. The left (outer) edge of all decreasing row will be in line vertically; except that when the top row represents an unsatisfactory appearance (usually centered over the row immediately below it).

6. Parallel rows of ribbon bars will either be spaced 0.3 cm apart or placed together without spacing at the individual’s option.

7. Ribbon bars will be centered 0.3 cm above and parallel to the top edge of the upper left pocket of dress coats, service coats, and shirts. When marksmanship badges are worn, ribbon bars will be centered above the pocket with the bottom edge of the ribbon bar 0.3 cm above the widest holding bar of the marksmanship badge(s).

R E S T R I C T E D

R E S T R I C T E D

326

8.10.2 Ribbons on Women’s Coat

On women’s coats with horizontal pockets, ribbons will be worn as prescribed above. On women’s coats with slanted upper pockets, a horizontal line tangent to the highest point of the pocket will be even with or up to 5.1 cm above the first visible button and centered so that they are in about the same position as when worn on the coat. On women’s shirts, ribbon bars will be placed in the same position as when worn on the coat. On the maternity tunic, ribbon bars will be placed so that they are in about the same position as when worn on the services coats. On the maternity shirt, when worn as an outer garment, ribbon bars will be worn in the same manner as on the standard shirt, except they will be placed 1.3 to 2.5 cm above the horizontal yoke seam stitching and may be adjusted to the individual to present a military appearance.

R E S T R I C T E D

R E S T R I C T E D

327

CHAPTER 9

CARE AND MARKING OF UNIFORM

“No matter how well fitting the uniform is when new, it will not continue to look its best unless it’s well cared during wear and when not in use.”

9.1 CARE OF THE UNIFORM

9.1.1 General Policies

1. The following information is presented to help prolong the useful life of uniforms and accessories so that they may be worn with justifiable pride, which distinguishes the military in uniform.

2. No matter how well fitting the uniform is when new, it will not continue to look its best unless it’s well cared during wear and when not in use. A uniform should be put on carefully and kept buttoned. Large or heavy objects carried in the pockets could destroy the shape of the uniform. When not in use, carefully place uniforms on hangers and keep in a well-ventilated storage place. Well-constructed wooden or plastic hangers shaped to fit the shoulder contour, with locking trouser bar or clips, are recommended. When uniforms are folded in duffel bags or other containers for storage or shipment, fold them carefully to preserve their original shape.

3. Hang all dress uniforms as much as possible to avoid wrinkles. Proper ironing is needed to insure the shape and spick-and-span appearance of all uniforms. Arrange uniforms in a locker or drawer of moderate room temperature. Do not use perfumes as the chemicals may damage the fabrics of the uniform. Inspect uniforms that are keep for longer period.

9.1.2 Service Uniforms

1. The same care required for dress uniforms is applicable to service uniform; however, due to more constant use, some additional measures may prove beneficial. As heat, friction and pressure have a deteriorating effect on materials, service uniforms generally show more wear

R E S T R I C T E D

R E S T R I C T E D

328

at creased areas. This may be partially off-settled by periodically pressing out old creases and reforming them slightly to either side of the previous crease. Sleeve cuffs and trousers/slacks/skirts hems should be periodically examined and turned if material permits.

2. Dry-cleaning preserves the original appearance and finish of wool and polyester/wool garments and is recommended over hand laundering. However, when dry-cleaning facilities are not available, and only as a last resort, wool and polyester/wool uniforms may be hand laundered. Hand launder with a neutral soap and fresh lukewarm water 21 to 27 degrees (If hard water is used, add small amount of water softener to the water.)

3. Do not use chlorine bleach. In laundering, thick suds are necessary for best results. The soap should be thoroughly dissolved in warm water and added to the cool water to reach a temperature of approximately 21 to 27 degrees.

4. In order to preserve the fabrics and clothes materials used, rubbing should be minimized. Rinse thoroughly to remove all traces of the soap. Avoid high temperature, friction, and pressure as much as possible.

5. Never run through a wringer or never twist to remove the excess water before drying.

6. After washing the garments, squeeze gently to remove surplus water, shape garment by hand, and dry in open air.

7. Colored garments should not be hung in the sun to dry. If this is unavoidable, garments should be turned inside out to dry.

8. Uniform items manufactured of polyester/cotton should not be bleached or starched.

9.1.3 General Office Uniforms

General office uniforms maybe hand washed in warm water or machine washed on the gentle cycle with mild detergent and allowed to dip dry. Do not bleach and wash with other dark clothes. Iron the uniform in same manner done on the other standard uniform. Creases will be applied as prescribed.

9.1.4 Battle Dress/Camouflage Uniforms

Washing instructions, to preclude shrinking of the camouflage utility uniform, are as follows: During the washing, drying, and finishing cycles, use the lowest possible temperature setting so that at no time will the garment be exposed to temperatures greater than 55 degrees centigrade.

R E S T R I C T E D

R E S T R I C T E D

329

Some laundry facilities may not press utilities due to potential damage from automated presses. Thus, any pressing required will be the individual’s responsibility. When hand washing is preferred, gently apply brushing method using warm water with mild detergent and allowed to dip dry. Although the use of starch or sizing is authorized as an individual option, it may adversely affect the comfort and durability of the uniform.

9.1.5 Buttons and Insignia

9.1.5.1 Buttons and Insignia

1. Gold buttons are plated to prevent tarnishing and should not be polished with abrasives or polishing cloths containing chemicals. Clean gold buttons with a weak solution of household ammonia and water.

2. Gold-plated buttons that have had the plating removed are likely to turn green due to exposure to moist air. This can be removed by rubbing gently with acetic acid or any substance containing this acid, such as vinegar, followed by a thorough washing in fresh water and drying.

3. The gold-filled parts and the sterling silver rhodium-finished parts of metal insignia are cleaned by washing with soap and water. Avoid using silver polish or abrasive.

9.1.5.2 Insignia

Service insignia will not be polished. If the plane silver or gold finish wears off, replace the insignia or keep polishing with approved liquid, necessary protective coating as sold through commercial stores may be applied. Use of paints or other coloring agents is prohibited.

9.1.6 Footwear

1. Maintenance of leather footwear is necessary to ensure maximum wear and to protect the healthy and sanitary condition of the feet. When not in use, the shape of the shoes should be maintained using shoetrees. Foot powder should be liberally sprinkled inside the shoe to absorb moisture. Constant inspection is necessary to ensure prompt repair to avoid breakdown of the upper leather.

2. Shoes should be kept as sand, dirt, grit, etc., have a deterioration action on shoe threads and shoe leather. Clean leather uppers periodically with saddle soap, which is leather preservative. Dubbing should never be used on footwear as such compounds seal the pores of the leather and cause excessive perspiration.

R E S T R I C T E D

R E S T R I C T E D

330

3. Synthetic leather shoes. For normal care, these shoes may be cleaned by wiping with a damp cloth or sponge. Occasional polishing with paste wax or cream polishes may be required; however, excess dust and dirt should be removed before polishing. Use liquid polish with care to avoid streaking. For white synthetic shoes, use a good polish in moderate amounts. To cover abrasion or scuff marks, apply a paste wax shoe polish, and then paste wax. Stains should be wiped off as quickly as possible, and then cleaned. For stubborn stains, try a little amount of lighter fluid. On white synthetic shoes, a mild abrasive cleaner may be used if rubbed gently. Do not use chlorinated cleaners, bleaches, or harsh abrasives. For cleaning, never use acetone, nail polish remover, chlorinated dry cleaning solvents, or alcohol. When in doubt about a cleaner or polish, try a little on the instep, close to the sole.

9.1.7 Undershirts

1. Although the dyed cotton material used in brown, green or camouflage undershirts has a strong tendency to fade, proper laundering and care will eliminate or reduce the probability of this occurring. However, fading/discoloration alone does not render the undershirt unserviceable.

2. Launder the green or camouflage undershirts using the permanent press cycle or hand wash in cold or warm water. Do not use bleach or detergents, which contain bleaching agents. Tumble dry on the permanent press cycle, drip dry on a rustproof hanger, or line dry out of the sun’s direct rays. Allowing the undershirt to come in contact with oxidizing agents, such as benzoyl peroxide (used in most acne medications) may cause spots, which cannot be removed without ruining the shirt.

3. Avoid hanging or ironing the undershirt on the neck side. This will prevent disfiguration or stretching of the round neck seam.

9.1.8 Belts

1. When belts are laundered, shrinkage is a normal reaction of untreated webbing. To compensate for shrinkage, the belts are manufactured three inches longer than the waist size; e.g., size 34 belts are 37 inches long. Belts should be washed at least three times before cutting to normal waistline size.

2. To prevent excess shrinkage after laundering, hand stretch the belts while wet.

9.1.9 Service Jackets

The service jacket maybe hand laundered or if possible dry-cleaned. A water repellency treatment if necessary may be applied after four or five dry cleanings. If dry cleaning is not possible, service jackets maybe

R E S T R I C T E D

R E S T R I C T E D

331

washed in a cold or warm water and hang dried inside out to avoid fading. Do not bleach jackets. Service jackets may be ironed to flattened wrinkles and restore its presentable appearance.

9.1.10 Storing Service Caps

Utilize the packaging material (tissue paper and chipboard cylinder) as it was originally used to prevent shifting of the cap and to support the crown. The chipboard cylinder should be placed flat (not on edge) within the crown to afford additional support.

9.1.11 Oversea or Garrison Caps

Wool oversea cap or garrison should be dry-cleaned only if possible. Alternative washing by hand will be restricted to soft rubbing to prevent damage on the cloth material. Hang dry away from sun’s direct rays. Do not bleach. Ironing may not be necessary.

9.1.12 Sweaters

Dry-cleaning the sweaters is recommended. However, the sweaters may be hand laundered using warm water with mild detergents. Hang dry away from the sun’s rays. Do not bleach or iron. Avoid twisting the sweater when removing excess water. Avoid overstretching the sweater.

9.1.13 Maternity Uniforms

The maternity tunic, slacks, and skirts may be dry-cleaned or washed in warm water on the gently cycle with mild detergent and allowed to drip-dry. Items may be tumble-dried if the dryer has an air cycle with no heat. Do not bleach. The maternity uniform should not be washed with other dark clothes. If touch-up pressing is desired, a cool iron should be used. Maternity shirts and the camouflage work uniform will be maintained in the same manner as the equivalent standard uniform items.

9.1.14 Sword and Scabbard

1. The sword blade and scabbard with chrome plating have been plated to prevent rust; however, should the plating be removed by use of abrasives or as a result of scratches or misuse, rust is likely. When not in use, the blade and the scabbard should be kept in a dry place and should be coated with a film of light oil.

2. The grip should be cleaned by wiping with a damp cloth and drying thoroughly.

3. The mountings on the sword and scabbard, including the hilt, are usually made of solid brass, highly polished or gold-plated. For best

R E S T R I C T E D

R E S T R I C T E D

332

results, clean all mountings with a cloth moistened with soapsuds to which a few drops of household ammonia have been added. Do not use abrasives or polishing cloths containing chemicals. Wipe with a cloth moistened with clear water and dry thoroughly.

4. The scabbard of the sword is covered with chrome, metal plating or hard plastics and should be cleaned with dry cloth. The sword blade and the gold-plated brass mountings should be maintained as indicated above.

9.1.15 Preventing Moth Damage

Frequent brushing and exposure to sunlight and fresh air will effectively prevent moths. If uniforms are to be put away for a long time and left attended, they should be thoroughly cleaned and packed in an airtight plastic bag or protected from moth damage with camphor balls, naphthalene, cedar wood, or paradichlorobenzene. Constant inspection of items kept for longer period should be done to prevent damages due to insects and chemical reactions. Replaced mothballs as necessary.

9.1.16 Cuts in Cloth

A clean cut in a cloth uniform can be repaired by being rewoven with threads drawn from the material in another part of the garment. This must be done by an experienced tailor and is an expensive process; however, a well-rewoven cut cannot be noticed, hence, replacement may not be needed.

9.2 MARKING OF THE UNIFORM

9.2.1 General Policies

1. Military personnel will plainly and indelibly mark every article of uniform clothing with the owner’s name and initials and the rank. Marks will be of a size appropriate to the article and the space available for marking and will consists of block letters not more than 1.3 cm in height. Marking machines, stencil, marking tape or labels, or stamp, as appropriate, may be used. Names will be marked in black on light-colored material inside the utility/camouflage uniform and in white on dark-colored materials. Marks will be placed so that they do not show when the uniform is worn normally except that nametapes/cloths will be worn on the outside of the utility uniform. When a marking tape or label is used, it should either be commercial or one made by printing or stamping the name on white tape, other than adhesive tape. In order to standardize and prevent variation, no elaboration of the following guide for marking will be made, nor will any greater preciseness of location be prescribed.

R E S T R I C T E D

R E S T R I C T E D

333

2. Articles marked with another individual’s name will have the first owner’s name obliterated by blocking out the name or using commercial eradicator. The new owner’s name will be remarked according to these instructions.

3. If military personnel have clothing marked according to previously published instructions, re-marking is not required until the markings becomes illegible. If a military personnel’s name is legally changed, re-marking with the new name is not required until the old marking becomes illegible. 4. Markings should be placed so as to make it hidden when normally worn. The markings should follow this form: LAST NAME AND INITIALS: PETROLA RD Rank MAJOR

9.2.2 Ownership Markings

1. Stencil. Uniform components of military personnel shall have ownership markings. Markings shall be a stencil consisting of owner’s surname, initials and ranks placed inside the garment. Stencil letters shall be approximately 1.3 cm high blocked letters.

2. Embroidery. Embroidered letters on camouflage utility shirts and trousers and field jackets shall be approximately 1.9 cm high blocked letters. Embroidered letters on coveralls shall also be approximately 1.9 cm high blocked letters. Name/breast insignia tape shall match color and fabric as uniform component and shall have the length of the width of the pocket.

9.2.3 Locations of Name on Articles

1. Bag, Duffel. On the outside of the bottom of the bag.

2. Belts (Except Trousers Belts). On the underside, near the buckle end.

3. Belts, Trousers, Web. On one side only, as near the buckle end as possible.

4. Caps. Inside on the sweatband.

5. Coats. Inside the neckband.

6. Crown, Cap. Inside the band.

R E S T R I C T E D

R E S T R I C T E D

334

7. Drawers. Outside, immediately below the waistband, near the front.

8. Gloves. Inside the wrist.

9. Handbag. On the space provided.

10. Liner (All-weather Coat). Centered near the top.

11. Necktabs. On the underside near left end.

12. Neckties. On the inside of the neck loop. (Hook-on ties: On the inside, near the top.)

13. Shirts. Inside the neckband.

14. Shoes/Boots. Inside near the top.

15. Socks. Outside on the side of the boots.

16. Sweater. Stamped on manufacturing label or use marking tape/label sewn inside the back of sweater, below the neckband, with thread to match the sweater.

17. Trousers; Skirts; Slacks. Inside near top.

18. Trunks. Inside, immediately below the waistband.

19. Undershirts. Inside back, near the neckband.

R E S T R I C T E D

R E S T R I C T E D

335

CHAPTER 10

REQUIRED UNIFORM

10.1 GENERAL POLICY

All military personnel are required to possess the minimum required uniforms prescribed in this Chapter and it shall be their responsibility to ensure that such uniform requirement shall be of good appearance and serviceability at all times. Not appearing in the prescribed uniform in any occasion or appearing with the un-prescribed uniform because of non-possession of the uniform shall be subject to corrective measure by the commander.

10.2 PHILIPPINE ARMY MINIMUM REQUIRED UNIFORMS

10.2.1 General Officers (Male/Female)

1. Mess Jacket – 1 set

2. White Duck – 1 set

3. Service Blouse – 1 set

4. Bush Coat – 1 set

5. GOU Green – 3 sets

6. Battle Dress Uniforms – 3 sets

7. Service Jacket – 1 each

10.2.2 Field Grade Officers (Male/Female)

1. Mess Jacket – 1 set

2. White Duck – 1 set

3. Service Blouse – 1 set

4. Bush Coat – 1 set

5. GOU Green – 3 sets

6. Battle Dress Uniform – 3 sets

7. Service Jacket – 1 each

R E S T R I C T E D

R E S T R I C T E D

336

10.2.3 Company Grade Officers (Male/Female)

1. White Duck – 1 set

2. Service Blouse – 1 set

3. Bush Coat – 1 set

4. GOU Green – 3 sets

5. Battle Dress Uniform – 3 sets

6. Service Jacket – 1 each

10.2.4 Enlisted Personnel (E-7 to E-9 Male/Female)

1. Service Blouse – 1 set

2. Bush Coat – 1 set

3. GOU Green – 2 sets

4. Battle Dress Uniform (BDU) – 3 sets

10.2.5 Enlisted Personnel (E-1 to E-6 Male)

1. GOU Green – 1 set

2. Battle Dress Uniform (BDU) – 3 sets

10.3 PHILIPPINE NAVY MINIMUM REQUIRED UNIFORMS

10.3.1 Flag Officers (Male/Female)

1. Mess Jacket – 1 set

2. Dress White – 1 set

3. Dress Blue – 1 set

4. Undress White – 2 sets

5. Working Khaki – 3 sets

6. Service Jacket – 1 each

7. Athletic Uniform – 2 each

8. Rain Coat (black) – 1 each

R E S T R I C T E D

R E S T R I C T E D

337

10.3.2 Field Grade Officers (Male/Female)

1. Mess Jacket – 1 set

2. Dress White – 1 set

3. Dress Blue – 1 set

4. Undress White – 2 sets

5. Working Khaki – 3 sets

6. Jacket – 1 each

7. Athletic Uniform – 2 sets

8. Rain Coat – 1 each

9. Battle Dress Uniform – 1 set

10.3.3 Company Grade Officers (Male/Female)

1. Dress White – 1 set

2. Dress Blue – 1 set

3. Undress White – 2 sets

4. Working Khaki –3 sets

5. Jacket – 1 each

6. Athletic Uniform – 2 sets

7. Rain Coat – 1 each

8. Battle Dress Uniform – 1 set

10.3.4 Enlisted Personnel (E-7 to E-9 Male)

1. Dress White – 1 set

2. Undress White – 2 sets

3. Working Khaki – 2 sets

4. Rain Coat – 1 each

5. Athletic Uniform – 2 sets

R E S T R I C T E D

R E S T R I C T E D

338

6. Battle Dress Uniform – 1 set

10.3.5 Enlisted Personnel (E-1 to E-6 Male)

1. White Alpha – 1 set

2. Summer White – 1 set

3. Dungaree/chambray – 2 sets/4 for aboard ship

4. Rain coat (black) – 1 each

5. Athletic Uniform – 2 sets

6. Battle Dress Uniform – 1 set

10.3.6 Enlisted Personnel (E-1 to E-6 Female)

1. White Alpha – 1 set

2. Summer White – 1 set

3. Dungaree/chambray – 2 sets

4. Athletic Uniform – 2 sets

5. Rain Coat (black) – 1 each

6. Battle Dress Uniform – 1 set

10.3.7 Marine Officers

10.3.7.1 General Officers (Male / Female)

1. Mess Jacket – 1 set

2. Dress Blue Gala – 1 set

3. Service Green – 1 set

4. Khaki Green (GOU) – 3 sets

5. Camouflage BDU– 3 sets

6. Service Jacket – 1 each

R E S T R I C T E D

R E S T R I C T E D

339

10.3.7.2 Field Grade Officers (Male / Female)

1. Mess Jacket – 1 set

2. Dress Blue Gala – 1 set

3. Service Green – 1 set

4. Khaki Green (GOU) – 3 sets

5. Camouflage BDU – 3 sets

6. Service Jacket – 1 each

10.3.7.3 Company Grade Officers (Male / Female)

1. Dress Blue Gala – 1 set

2. Service Green – 1 set

3. Khaki Green (GOU) – 3 sets

4. Camouflage BDU – 3 sets

5. Service Jacket – 1 each

10.3.8 Marine Enlisted Personnel

10.3.8.1 Top Enlisted (E7 to E9)

1. Dress Blue Gala – 1 set

2. Service Green – 1 set

3. Khaki Green (GOU) – 3 sets

4. Camouflage Uniform – 3 sets

10.3.8.2 Enlisted Personnel (E1 to E6)

1. Dress Blue Gala – 1 set

2. Khaki Green – 2 set

3. Camouflage Uniform – 3 sets

R E S T R I C T E D

R E S T R I C T E D

340

10.4 PHILIPPINE AIR FORCE MINIMUM REQUIRED UNIFORMS

10.4.1 General Officers (Male)

1. Mess Jacket – 1 set

2. Dress White – 1 set

3. Dress Blue (Maj Svc Blouse) – 1 set

4. Safari Bush Coat (Blue Color) – 2 sets

5. General Office Uniform (GOU) – 3 sets

6. Battle Dress Uniform (Camouflage) – 1 set

7. Flying Suit (For Rated Officers) – 3 sets

8. Athletic Uniform – 2 sets

9. Service Jacket – 1 each

10.4.2 General Officers (Female)

1. Mess Jacket – 1 set

2. Dress White – 1 set

3. Dress Blue (Maj Svc Blouse) – 1 set

4. Safari Bush Coat – 2 sets

5. General Office Uniform – 3 sets

6. Battle Dress Uniform (Camouflage) – 1 set

7. Flying Suit (for Rated Officers) – 2 sets

8. Athletic Uniform – 2 sets

9. Service Jacket – 1 each

10.4.3 Field Grade Officers (O4 to O6) (Male)

1. Mess Jacket – 1 set

2. White Duck – 1 set

3. Dress Blue (Maj Svc Blouse) – 1 set

R E S T R I C T E D

R E S T R I C T E D

341

4. Safari Bush Coat (Blue Color) – 1 set

5. General Office Uniform (GOU Blue) – 3 set

6. Battle Dress Uniform (Camouflage) – 1 set

7. Flying Suit (for Rated Officers) – 1 set

8. Athletic Uniform – 1 set

9. Service Jacket – 1 each

10.4.4 Field Grade Officers (O4 to O6 Female)

1. Mess Jacket – 1 set

2. Dress White – 1 set

3. Dress Blue (Maj Svc Blouse) – 1 set

4. Safari Bush Coat (Blue Color) – 1 set

5. General Office Uniform (GOU Blue) – 3 sets

6. Battle Dress Uniform (Camouflage) – 1 set

7. Flying Suit (for Rated Officers) – 1 set

8. Athletic Uniform – 1 set

9. Service Jacket – 1 each

10.4.5 Company Grade Officers (O1 to O3 Male)

1. White Duck – 1 set

2. Dress Blue (Maj Svc Blouse) – 1 set

3. Safari Bush Coat (Blue Color) – 1 set

4. General Office Uniform (GOU Blue) – 3 sets

5. Battle Dress Uniform (Camouflage Fatigue) – 1 set

6. Flying Suit (for Rated Officers) – 2 sets

7. Athletic Uniform – 2 sets

8. Service Jacket – 1 each

R E S T R I C T E D

R E S T R I C T E D

342

10.4.6 Company Grade Officers (O1 to O3 Female)

1. Dress White – 1 set

2. Dress Blue (Maj Svc Blouse) – 1 set

3. Safari Bush Coat (Blue Color) – 1 set

4. General Office Uniform (GOU Blue) – 3 sets

5. Battle Dress Uniform – 1 set

6. Flying Suit (for Rated Officers) – 2 sets

7. Athletic Uniform – 2 sets

8. Service Jacket – 1 each

10.4.7 Enlisted Personnel (E-7 to E-9 Male/Female)

1. Dress Blue (Maj Svc Blouse) – 1 set

2. Safari Bush Coat (Blue Color) – 2 sets

3. General Office Uniform (GOU Blue) – 3 sets

4. Battle Dress Uniform – 1 set

5. Flying Suit (for Air Crew/Maintenance only) – 2 sets

6. Athletic Uniform – 2 sets

10.4.8 Enlisted Personnel (E-1 to E-6 Male / Female)

1. Dress Blue (Maj Svc Blouse) – 1 set

2. General Office Uniform (GOU Blue) – 3 sets

3. Battle Dress Uniform (Camouflage Fatigue) – 1 set

4. Flying Suit (for Air Crew/Maintenance only) – 2 sets

5. Athletic Uniform – 2 sets

R E S T R I C T E D

R E S T R I C T E D

343

10.5 TECHNICAL SERVICE MINIMUM REQUIRED UNIFORM

10.5.1 General Officers (Male/Female)

1. Mess Jacket – 1 set

2. White Duck – 1 set

3. Service Blouse – 1 set

4. Bush Coat – 1 set

5. General Office Uniform – 3 sets

6. Battle Dress Uniform – 2 sets

7. Technical Service Jacket – 1 set

8. Athletic Uniform – 2 sets

10.5.2 Field Grade Officers (O4 to O5 Male/Female)

1. Mess Jacket – 1 set

2. White Duck – 1 set

3. Service Blouse – 1 set

4. Bush Coat – 1 set

5. General Office Uniform – 3 sets

6. Battle Dress Uniform – 2 sets

7. Technical Service Jacket – 1 set

8. Athletic Uniform – 2 sets

10.5.3 Company Grade Officers (O1 to O3 Male/Female)

1. White Duck – 1 set

2. Service Blouse – 1 set

3. Bush Coat – 1 set

4. General Office Uniform – 3 sets

5. Battle Dress Uniform – 1 set

R E S T R I C T E D

R E S T R I C T E D

344

6. Technical Service Jacket – 1 each

7. Athletic Uniform – 2 sets

10.5.4 Enlisted Personnel (E-7 to E-9 Male/Female)

1. General Office Uniform – 3 sets

2. Battle Dress Uniform – 1 set

3. Athletic Uniform – 2 pairs

4. Clinical Working Uniform – 3 sets (for Medical and Dental personnel only)

10.5.5 Enlisted Personnel (E-1 to E-6 Male/Female)

1. General Office Uniform – 3 sets

2. Battle Dress Uniform – 1 set

3. Athletic Uniform – 2 sets

4. Clinical Working Uniform – 3 sets (for Medical and Dental personnel only)

R E S T R I C T E D

R E S T R I C T E D

345

ANNEX A (Service Uniforms)

PHILIPPINE ARMY UNIFORMS

R E S T R I C T E D

R E S T R I C T E D

346

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

347

Army White Duck Army Service Blouse

Army Bush Coat General Office Uniform

R E S T R I C T E D

R E S T R I C T E D

348

Battle Dress Uniform

Combat Vehicle Crewman Uniform Army Black Uniform

General Office Uniform

R E S T R I C T E D

R E S T R I C T E D

349

Army Gala Uniform Army Gala Rayadillo Uniform

Army Gala Rayadillo Uniform (EP) Army Gala Uniform (Female)

R E S T R I C T E D

R E S T R I C T E D

350

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

351

PHILIPPINE NAVY UNIFORMS

R E S T R I C T E D

R E S T R I C T E D

352

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

353

Undress White Uniform

Service Khaki Uniform

Dress White Uniform Navy Dress Blue Uniform

R E S T R I C T E D

R E S T R I C T E D

354

Battle Dress Uniform Blue Coverall Uniform

Service Dress White Jumper (White Alpha)

Summer White

R E S T R I C T E D

R E S T R I C T E D

355

Summer White Uniform

Dungaree/Chambray Uniform

General Office Uniform

Undress White (Officers/Female)

R E S T R I C T E D

R E S T R I C T E D

356

Dress Blue (Enlisted) Dress Blue (Officers)

Battle Dress Uniform (Camouflage) General Office Uniform

R E S T R I C T E D

R E S T R I C T E D

357

PHILIPPINE AIR FORCE UNIFORMS

R E S T R I C T E D

R E S T R I C T E D

358

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

359

White Duck Uniform Service Blouse Uniform

Bush Coat Uniform Academic Instructor Uniform

R E S T R I C T E D

R E S T R I C T E D

360

Flight Duty Uniform Battle Dress Uniform

Air Force Gala Uniform Air Force Gala Uniform

R E S T R I C T E D

R E S T R I C T E D

361

Black Coverall Uniform General Office Uniform (GOU)

Honor Escort Gala Blue Uniform Air Police Bikers

R E S T R I C T E D

R E S T R I C T E D

362

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

363

TECHNICAL and ADMINISTRATIVE

SERVICES UNIFORMS

R E S T R I C T E D

R E S T R I C T E D

364

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

365

Dress White Uniform Dress White Uniform

Evening Dress Uniform Mess Jacket

R E S T R I C T E D

R E S T R I C T E D

366

Technical Service Blouse Uniform Technical Service Blouse Uniform

Bush Coat Uniform Bush Coat Uniform

R E S T R I C T E D

R E S T R I C T E D

367

General Office Uniform General Office Uniform

Dental Service Clinical UniformDental Service Clinical Uniform

R E S T R I C T E D

R E S T R I C T E D

368

Battle Dress Uniform (BDU) Battle Dress Uniform (BDU)

Hospital Maternity Uniform Hospital Duty Uniform

R E S T R I C T E D

R E S T R I C T E D

369

Athletic Uniform

Athletic Uniform

Office Maternity Uniform

R E S T R I C T E D

R E S T R I C T E D

370

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

371

GHQ HSC and PSG UNIFORM

R E S T R I C T E D

R E S T R I C T E D

372

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

373

Gala White (Officers) Gala White (EP)

Gala Gray (Officer) Gala Gray (EP)

R E S T R I C T E D

R E S T R I C T E D

374

Rayadillo Rayadillo

Rayadillo Rayadillo

R E S T R I C T E D

R E S T R I C T E D

375

Urban Camouflage

Black Uniform (SRU)

Urban Camouflage

PSG Blue Uniform

R E S T R I C T E D

R E S T R I C T E D

376

PSG Blue Uniform Athletic Uniform

R E S T R I C T E D

R E S T R I C T E D

377

PMA CADET UNIFORM

R E S T R I C T E D

R E S T R I C T E D

378

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

379

Full Dress White Underarms Full Dress White Underarms

Dress White Underarms Dress Gray Underarms

R E S T R I C T E D

R E S T R I C T E D

380

Full Dress Gray Underarms Full Dress Gray Underarms

Full Dress White Full Dress White

R E S T R I C T E D

R E S T R I C T E D

381

Dress Gray Full Dress Gray

Dress White Dress White

R E S T R I C T E D

R E S T R I C T E D

382

Drill A Dress Gray Underarms

Study Uniform Picnic Uniform

R E S T R I C T E D

R E S T R I C T E D

383

Battle Dress Uniform Battle Dress Uniform

Combat Uniform

R E S T R I C T E D

R E S T R I C T E D

384

Fatigue Duty Uniform Fatigue Duty Uniform

Athletic Uniform Athletic Uniform

R E S T R I C T E D

R E S T R I C T E D

385

General Athletic Uniform Jogging Suit

R E S T R I C T E D

R E S T R I C T E D

386

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

387

ANNEX B (Awards)

Medal of Valor (MOV)

Distinguished Conduct Star (DCS)

Distinguished Service Star (DSS)

Gold Cross (GC)

Philippine Legion of Honor Degree of Chief Commander

Philippine Legion of Honor Degree of Commander

R E S T R I C T E D

R E S T R I C T E D

388

Philippine Legion of Honor (PLOH) (Degree of Officer)

Philippine Legion of Honor (PLOH) (Degree of Legionnaire)

Outstanding Achievement Medal (OAM)

Distinguished Navy Cross

Distinguished Aviation Cross (DAC)

Bronze Cross

R E S T R I C T E D

R E S T R I C T E D

389

Military Merit Medal (MMM) Military Commendation Medal (MCM)

Gawad sa Kaunlaran (GSK)

Military Civic Action Medal (MCAM)

Wounded Personnel Medal (WPM)

Silver Wing Medal (SWM)

R E S T R I C T E D

R E S T R I C T E D

390

Superior Honor Medal

Distinguished Honor Medal Civilian Merit Medal

AFP Conduct Medal Sagisag ng Ulirang Kawal

Long Service Medal

R E S T R I C T E D

R E S T R I C T E D

391

Kagitingan sa Barangay (Category of Maginoo)

Kagitingan sa Barangay (Category of Lakan)

Kagitingan sa Barangay (Category of Datu)

Anti-Dissidence Campaign Medal and Ribbon

Luzon Anti-Dissidence Campaign Medal and Ribbon

Visayas Anti-Dissidence Campaign Medal and Ribbon

R E S T R I C T E D

R E S T R I C T E D

392

Mindanao Anti-Dissidence Campaign Medal and

Ribbon

Disaster Relief & Rehabilitation Operation

Ribbon

United Nations Service Medal and Ribbon

World War II Victory Medal and RibbonPhilippine Republic Presidential Unit Citation Badge

Election Duty Badge

R E S T R I C T E D

R E S T R I C T E D

393

Marine Command Badge

Navy Command at Sea BadgeAFP Parachutist Badge

Naval Aviation Badge

PAF Aviation Badge

PAF Gold Wings Badge

R E S T R I C T E D

R E S T R I C T E D

394

Avionics Aircraft Maintenance Officer Specialty Badge

UOG Scuba Diver's Badge

UOG Seal Team Badge

Inspector General Service (IGS) Badge

Adjutant General Service (AGS) Badge

AFP Home Defense Badge

R E S T R I C T E D

R E S T R I C T E D

395

Army Combat Commanders Kagitingan Badge Marksmanship Badge

AFP ROTC Cadet of the Year Badge

Tanglaw Badge

AFP Civilian Personnel of the Year Badge AFP Enlisted Personnel of the Year Badge

R E S T R I C T E D

R E S T R I C T E D

396

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

397

ANNEX C (Service Rank Insignia, Service Equivalent)

RANK ARMY NAVY AIR FORCE MARINES

2LT/ENS

1LT/LTJG

CAPT/LT

MAJ/LCDR

LTCOL/CDR

COL/CAPT

BGEN/COMMO

MGEN/RADM

LTGEN/VADM

GEN/ADM

R E S T R I C T E D

R E S T R I C T E D

398

CMS/MCPO E9

SMS/SCPO E8

MSGT/CPO E7

TSGT/PO1 E6

SSGT/PO2 E5

SGT/PO3 E4

CPL/SN1 E3

PFC/SN2 E2

PVT/ASN E1

ARMY NAVY AIR FORCE MARINES

R E S T R I C T E D

R E S T R I C T E D

399

ANNEX D (Blouse, Dress White (White Duck)/ Service Dress)

Blouse, Dress White (White Duck)/ Service Dress, Male Officers (Army, Air Force, Technical

Services)

Blouse, Dress White (White Duck)/ Service Dress, Male Enlisted (Army, Air Force, Technical

Services)

Blouse, Evening Dress, Male Officers (Army, Navy, Air

Force, Technical Services)

Blouse, Evening Dress, Male Officers (Marines)

R E S T R I C T E D

R E S T R I C T E D

400

Blouse, Dress Blue, Male Officers (Navy)

Blouse, Dress White, Male Officers (Navy/Marines)

Blouse, Dress White, Male Chief Petty Officers (Navy)

Blouse, Dress Blue, Male Chief Petty Officers (Navy)

R E S T R I C T E D

R E S T R I C T E D

401

White Jumper, Male Enlisted (Navy)

Front Back

Blue Jumper, Male Enlisted (Navy)

Front Back

R E S T R I C T E D

R E S T R I C T E D

402

Blouse, Dress Blue, Male Officers (Marines)

Blouse, Dress Blue, Male Enlisted (Marines)

Blouse, Khaki Green, Male Officers (Marines)

Blouse, Khaki Green, Male Enlisted (Marines)

R E S T R I C T E D

R E S T R I C T E D

403

Pants/Trouser, Front, Male Officers (Army, Navy, Air Force,

Marines, Technical Services)

Pants/Trouser, Back, Male Officers (Army, Air Force,

Marines, Technical Services)

Pants/Trouser, Back, Male Officers (Navy)

R E S T R I C T E D

R E S T R I C T E D

404

Blouse, Dress White (White Duck)/ Service Dress, Female

Officers (Army, Air Force, Technical Services)

Blouse, Dress White (White Duck)/ Service Dress, Female

Enlisted (Army, Air Force, Technical Services)

Blouse, Dress White (White Duck)/ Dress Blue, Female

Officers (Navy)

Blouse, Dress White (White Duck)/ Dress Blue, Female

Enlisted (Navy)

R E S T R I C T E D

R E S T R I C T E D

405

`

Blouse, Dress White (White Duck)/ Dress Blue, Female

Officers (Marines)

Blouse, Dress White (White Duck)/ Dress Blue, Female

Enlisted (Marines)

Skirt, Female, Dress White (White Duck)/ Service Dress (Army, Navy, Air Force, Marines, Technical Services), Dress Blue (Navy, Marines)

* Skirt is knee length for all types of uniforms except for Navy Dress White, which is 7.5 cm below the knee. Side piping and web belts are as per major service regulation. Closed slit is at the back.

Front Back Side, Right

R E S T R I C T E D

R E S T R I C T E D

406

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

407

ANNEX E (General Office Uniforms)

Shirt, Front, Male Officers (Army, Air Force, Technical

Services)

Shirt, Front, Male Enlisted (Army, Air Force, Technical

Services)

Shirt, Back, Male Officers/Enlisted (Army, Air Force, Technical Services)

R E S T R I C T E D

R E S T R I C T E D

408

Shirt, Front, Male Officers (Navy)

Shirt, Front, Male Enlisted (Navy)

Shirt, Back, Male Officers/Enlisted (Navy)

R E S T R I C T E D

R E S T R I C T E D

409

Shirt, Front, Male Officers (Marines)

Shirt, Front, Male Enlisted (Marines)

Shirt, Back, Male Officers/Enlisted (Marines)

R E S T R I C T E D

R E S T R I C T E D

410

Shirt, Female Officers (Army, Navy, Air Force, Technical Services, Marines)

Shirt, Female Enlisted (Army, Air Force, Technical Services, Marines)

R E S T R I C T E D

R E S T R I C T E D

411

Skirt, Female, General Office Uniform (Army, Navy, Air Force, Marines, Technical Services)

* Skirt is knee length for all service office uniforms. Side piping and web belts are as per major service regulation. Closed slit is at the back. Trousers will have side pockets as that of the male but there shall be no back pockets.

Shirt, Female Enlisted (Navy)

R E S T R I C T E D

R E S T R I C T E D

412

Pants/Slacks, Front, Female Officers/Enlisted (Army, Navy, Air Force, Marines, Technical

Services)

Pants/Slacks, Back, Female Officers/Enlisted (Army, Navy, Air Force, Marines, Technical

Services)

R E S T R I C T E D

R E S T R I C T E D

413

ANNEX F (MP DELIQUENCY REPORT FORM)

MP REPORT OF DELINQUENCY A No. 181060 1. Data on Offender ____________________________________________ (Name/Rank or Grade) AFPSN/Br of Svc ______________________________

Unit/Orgn ___________________________________

Station _____________________________________

2. Offense (s): _________________________________ ____________________________________________

____________________________________________

Place Committed _____________________________

Date – Time _________________________________

3. Witness(es) to Commission Address (a) _____________________ _________________ (b) _____________________ _________________

4. Reporting MP. Name/Rank or Grade __________________________ Orgn & Stn __________________________________ 5. Traffic Offense Space: License Nr ____________ Date Issued: ____________

License Rec’d by ______________________________

AFP PMG Form Nr 1-A Replaces AFP PMG Form NR 1 (30 Jan 1957) (30 Sep 54)

(ORIGINAL)

OFFENDER’S COPY 67063-2

R E S T R I C T E D

R E S T R I C T E D

414

1. This D/R serves as a Temporary Operator Permit for returning vehicle to station and/or motor pool only. Offender is directed to report the delinquency to his unit CO within 24 hours. 2. Any disrespect or improper performance of duty by any member of the Military Police will be reported by the offended party to the former’s Commanding Officer of TPMG, AFP for disciplinary action. No person apprehended shall take action himself the right of a Commanding Officer to reprimand a military policeman on duty. The Military Policeman is under order by his superior officers to report or apprehend any violator, but he is not authorized to decide the merits of a case. 3. When any violator is apprehended by any member of an MP unit of the AFP, the CO of the apprehending unit will forward a duplicate copy of the report to the Adjutant General, GHQ, AFP (ATTN: TPMG).

R E S T R I C T E D

R E S T R I C T E D

415

ANNEX G (Recommendations for Changes)

From: To: Deputy Chief of Staff for Personnel, J1 Subj: Recommendations for Changes 1. The following recommendations are submitted for the improvement of the AFP Uniform Code. a. Unit: b. Item: c. Comment: d. Recommendation: 2. For information.

Originating Unit

(Date)

(Name; Rank; Signature)

R E S T R I C T E D

R E S T R I C T E D

416

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

417

ANNEX H (RECORD OF CHANGES)

RECORD OF CHANGES

Identification of Change of Correction Date Entered

By whom entered (Name: Rank/Grade/Rate)

Designation Name of Unit

R E S T R I C T E D

R E S T R I C T E D

418

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

419

ANNEX I (References) 1. Commonwealth Act Nr. 1 dated 21 December 1935 re Creation of Philippine Army including Off-Shore Patrol using Khaki uniform. 2. Executive Order No. 94 dated 24 October 1947 re Off-Shore Patrol Elevated to Philippine Naval Patrol (PNP) and Brought About Alterations of the PNP Personnel Uniform. 3. GHQ Circular Nr 49 dated 13 July 1955 re Shedding of Uniform by the AFP Personnel in Operations against Dissidents. 4. GHQ Circular Nr 54 dated 05 August 1955 re Amendment to AFP Rank Insignia and Coat of Arms. 5. HPN Circular Nr 37 dated 14 December 1955 re Wearing of Naval Uniforms by all Philippine Navy officers and enlisted personnel. 6. GHQ Circular Nr 24 dated 20 November 1956 re Changes in PAF Uniform. 7. GHQ Circular Nr 37 dated 06 January 1958 re Amendment of Circular Nr 22, GHQ AFP s-55 “AFP Rank Insignia and Coat of Arms” 8. GHQ Circular Nr 11 dated 24 October 1963 re Wearing of Civilian Attire by Military Personnel. 9. GHQ Circular Nr 10 dated 23 December 1971 re Non-Use of Collar Insignia and Use of Branch of Service Insignia. 10. GHQ Letter Directive dated 11 January 1973 re Imitation of the Military Uniforms, Ranks and/or Insignias. 11. AFPRG 131-482 dated 23 February 1973 re Prohibition on the Wearing of the AFP Uniform by Retired and Reserve Officers not on active duty. 12. GHQ Letter Directive dated 05 February 1974 re Use of Sam Brown Belt with Pistol Holder. 13. GHQ Circular Nr 3 dated 24 February 1977 re Uniform and Rank Insignia of Military Personnel detailed or assigned to other Major Services.

R E S T R I C T E D

R E S T R I C T E D

420

14. GHQ Letter Directive dated 04 November 1981 re Use of Pershing Cap. 15. GHQ Circular Nr 7 dated 04 October 1982 re Amendment to Circular Nr 4, GHQ AFP dated 15 November 1976 re Common Uniform for Female Officers and of the AFP. 16. GHQ Letter Directive # 59-83 dated 11 Jun 83 re Wearing of Nameplate and Ribbons on General Office Attire (GOA). 17. GHQ Letter Directive dated 28 February 1987 re AFP Fatigue Uniform and Patches. 18. GHQ Personnel Directive dated 25 November 1988 re Implementation of Haircut and Use of Regulation T-Shirt. 19. Approved SDF dated 06 February 1990 re Uniform when Attending Hearings at Congress. 20. Cir # 5, GHQ AFP dated 08 February 1990 re Authorized Clothing Allowance of Military Personnel, Reservist and Para-Military Forces. 21. Approved SDF dated 27 June 1990 re Pin for AFP Student Attending Foreign Course. 22. J2 initiated DF dated 19 December 1990 re Logo, Uniforms and Rank Insignias of the AFP’s Tri-Service Commands. 23. GHQ AFP SOP Nr 1 dated 14 February 1991 re Authorized Military Uniforms at Military Camps within Metro Manila Area. 24. GHQ AFP SOP Nr 9 dated 02 May 1991 re Amendment to SOP Nr 1 GHQ AFP dated 14 February 1991 re Authorized Military Uniform at Military Camps within Metro Manila Area. 25. GHQ Letter Directive dated 13 March 1992 re Appearance of AFP Personnel in Press Releases. 26. GHQ Letter Directive dated 02 June 1992 re Flight Nurse Uniform. 27. GHQ Letter Directive dated 26 August 1992 re PAF Blue Uniform. 28. GHQ Letter Directive dated 17 July 1992 re Use of Pershing Cap.

R E S T R I C T E D

R E S T R I C T E D

421

29. GHQ Letter Directive dated 04 December 1992 re New GOA/Blouse for the PA. 30. HPA Letter Directive dated 14 April 92 re New Battle Dress Uniform for PA Personnel. 31. GHQ Letter Directive dated 26 August 1992 re PAF Blue Uniform. 32. GHQ Letter Directive # 51-92 dated 04 December 92 re New GOU Blouse for Philippine Army. 33. GHQ Letter Directive dated 02 April 1993 re Wearing of Distinctive Service Uniforms. 34. GHQ Letter Directive dated 29 April 1993 re Wearing of Uniforms During Summer Season. 35. GHQ Letter Directive dated 02 April 1993 re Wearing of distinctive service uniform AFP Wide, GOU Khaki. 36. GHQ Letter Directive dated 16 March 1994 re PN General Office Uniform (GOU) Working Khaki. 37. HPA Letter Directive dated 08 March 95 re GOA of the Philippine Army. 38. GHQ Letter Directive dated 12 April 1995 and HPN Memo dated 13 September 2001 re PN Distinctive Service General Office Attire (GOA), Black and White. 39. HPA Letter Directive dated 18 December 1995 re Amendments in PA Green Blouse Uniforms. 40. GHQ Letter Directive # 28-96 dated 25 March 1996 re Shades of Uniforms. 41. HPA Letter Directive dated 09 May 1996 re Textile Materials for Distinctive GOU Uniform. 42. HPA Letter Directive dated 28 August 1996 re Wearing of Service Jacket, Green Garrison Belt and Green Necktie with Service Pin. 43. GHQ Letter Directive dated 17 January 1997 re Uniform for EP (Senior Master Sergeant and Chief Master Sergeant included).

R E S T R I C T E D

R E S T R I C T E D

422

44. GHQ Letter Directive # 35-97 dated 06 August 1997 re Beret as Standard Headgear for BDU and GOU Uniform. 45. GHQ AFP Letter Directive # 39-97 dated 18 August 1997 re Wearing of Uniforms. 46. GHQ Letter Directive # 55-97 dated 19 November 97 re Use of Chevrons and Shoulder Loops for AFP/Maj Svcs/GHQ, AFPWSSU’s, AC Sgt Major. 47. GHQ Letter Directive # 06-98 dated 14 February 1998 re Wearing of Headgears. 48. GHQ Letter Directive # 40-99 dated 10 September 1999 re Wearing of Oversea Cap and Beret. 49. PAF Letter Directive dated 09 August 2000 re General Office Uniform (GOU) Blue Uniform. 50. GHQ Letter Directives dated 02 April 2001 re Military Officer Uniform for Different Occasions. 51. HPAF Letter Directive dated 23 July 2001 re Wearing of Ribbons/Decorations on GOA Uniform. 52. GHQ Letter Directive # 37-01 dated 15 August 2001 re Military Officer’s Attire for Different Occasions. 53. Memo from SJS dated 04 March 2002 re Wearing of Ribbons/Badges/Nameplate in GOU. 54. Memo from CS, AFP dated 07 March 2002 re Wearing of Prescribed Uniform. 55. HPA Letter Directive dated 15 April 2002 re Wearing of Army GOA. 56. HPA Letter Directive dated 30 July 2002 re Proper Wearing of Uniforms. 57. GHQ Letter Directive Number 75 dated 27 November 2002 re New Battle Dress Uniform for PAF Personnel. 58. HPAF Letter Directive dated 01 February 2002 re Service Blouse for the Enlisted Personnel.

R E S T R I C T E D

R E S T R I C T E D

423

59. Memo from SJS dated 04 March 2002 re Wearing of Ribbons/Badges/Nameplates in GOU. 60. Memo from CSAFP dated 07 March 2002 re Wearing of Prescribed Uniforms. 61. Memo from CSAFP dated 22 February 2003 re Authorized AFP Female Military Personnel Uniform. 62. GHQ Letter Directive dated 12 March 2003 re Placement of Nameplate in AFP Uniform. 63. HPA Letter Directive dated 10 December 2003 re Changes in Service Blouse and Bush Coat Uniforms. 64. Memo from CSAFP dated 26 January 2004 re Changes in Pershing Cap Appurtenances. 65. Memo from CSAFP to CG, PA dated 04 May 2004 re Changes in Uniform.

R E S T R I C T E D

R E S T R I C T E D

424

This page is intentionally left blank.

R E S T R I C T E D

R E S T R I C T E D

425

ANNEX J (AFP and Major Services Uniform Board Members )

AFP Uniform Board Members

Name Designation COMMO EMILIO C MARAYAG O-7216 AFP Chairman BGEN ZOILO R BENAVIDEZ O-6544 AFP Member COL EDUARDO B STO DOMINGO O-6790 PA (GSC) Member CAPT DEMETRIO B BIDAN JR O-103879 PN (GSC) Member COL BENITO ANTONIO T DE LEON O-8282 PA (GSC) Member COL HENRY A GALARPE O-7174 PAF (GSC) Member COL ALFREDO G RAMIREZ O-6951 PAF (GSC) Member COL ESTELA L YUTADCO O-6651 NC (GSC) Member CDR AMADITO L MANZON O-109515 PN Member LTCOL RODOLFO V DE JUAN JR O-116877 PA (AGS) Member MAJ MATEO T DOCTOR PAF Member MAJ RICARDO D PETROLA O-10239 PN (M) Member /Secretary CMSGT MARIO M GABRIEL 575923 PA Member

AFP Uniform Code Working Committee

Name Designation CDR AMADITO L MANZON O-109515 PN Chairman MAJ RODRIGO V QUINTILLA O-115693 PA Member MAJ ADRIANO S PEREZ JR O-9950 PA Member MAJ RICARDO D PETROLA O-10239 PN (M) Member

Philippine Army Uniform Board

Name Designation COL EDUARDO B STO DOMINGO O-6790 PA (GSC) Chairman COL RAUL J AVELINO O-105062 PA (GSC) Member COL FRANCIS R ABELLA O-102643 PA (GSC) Member LTC DANTE D BALAO O-8153 PA (GSC) Member LTC DANTE G TALINO O-8121 PA (GSC) Member LTC RAFAEL A SERRA JOSE O-8992 PA Member MAJ REYNALDO G GETUABAN PA (QMS) Member MAJ RICARDO G MARIANO O-117103 PA Member CMS Reynaldo A Aribon 602584 PA Member

R E S T R I C T E D

R E S T R I C T E D

426

Philippine Navy Uniform Board

Name Designation CAPT DEMETRIO B BIDAN JR O-103879 PN (GSC) Chairman LTC BERNARDO C FERRER O-112047 PN (M) Member MAJ ARTHUR M BIYO O-9645 PN (M) Member LCDR ADELIUS S BORDADO O-9846 PN Member CPT ELIAS C JUSON O-120525 PN (M) Member LT JOSE D PELEO O-116801 PN Member LT ELPIDIO B CARINO O-118150 PN Member LT ENRIQUITO C NAMI O-116571 PN Member LT GLORIA M PASTOR O-115629 PN Member LT JOY DAVE T GABUELO O-116834 PN Member LT SILVESTRE L RUBITE O-126405 PN Member LT CLIFFORD A BATTUNG 0-11734 PN Member ENS ROMEO R OLIVA JR O-12930 PN Member MCPO Leonardo R Apruebo PN Member

Philippine Air Force Uniform Board

Name Designation COL ALFREDO G RAMIREZ O-6951 PAF (GSC) Chairman COL JAIME E LARGO O-7330 PAF (GSC) Member COL DOMINGO E DIMAPILIS JR PAF (GSC) Member COL ARTHUR P MANCENIDO O-7456 PAF (GSC) Member LTC ALEXANDER O FLORES O-7605 PAF (GSC) Member LTC LORENZO S GUMBA PAF (GSC) Member LTC ARTHUR A ABADILLA O-106712 PAF (GSC) Member LTC ROMEO R ABAD O-107538 PAF Member MAJ NICOMEDES A ALONZO O-111685 PAF Member

Technical and Administrative Services Uniform Board

Name Designation COL ESTELA L YUTADCO O-6651 NC (GSC) Chairman COL RODOLFO O SANTOS O-106649 MAC (GSC) Member COL AURELIO C SALLE O-119151 DS Member LTC ROSALINDO C ACACIO JR O-9820 CHS (GSC) Member LTC ARTHUR A ABADILLA O-106712 PAF (GSC) Member LTC ROMEO R ABAD O-107538 PAF Member MAJ EDITHA D CALLANTA O-109881 WAC Member P2LT ANTONIO ARTURO M GALIT JAGS Member

R E S T R I C T E D

R E S T R I C T E D

427

AFPWSSUs Uniform Board

Name Designation LTC ANTONIO E ENDONILLA O-106073 PA Chairman LTC DAN A BAGAPURO O-8484 PAF Member MAJ ORLANDO D EDRALIN O-10556 Member CPT ARNEL N AGARPAO O-10814 PAF Member LTJG ELVIRA S RODRIGUEZ O-12588 PN Member

Sub- Committee on Awards

Name Designation LTC RODOLFO V DE JUAN O-116877 PA (AGS) Chairman MAJ CRESENCIANO A MARQUEZ O-10139 PAF Member LTJG MATEO G CARIDO O-10139 PAF Member

Sub- Committee on Organizational Clothing and Equipment

Name Designation BGEN ZOILO R BENAVIDEZ O-6544 AFP Chairman MAJ CRESENCIANO A MARQUEZ O-10139 PAF Member LTJG MATEO G CARIDO O-12196 PN Member

Former AFP Uniform Board Members

Name COL HERNANIE B PEREZ O-7766 PAF (GSC) COL JOSE B VIZCARRA O-7916 PA (GSC) COL ALFREDO G RAMIREZ O-6951 PAF (GSC) COL ESTELA L YUTADCO O-6651 NC (GSC) LTC ANTONIO E ENDONILLA O-106073 PA LTCOL DAN M BAGAPORO PAF LTCOL BENJAMIN G PADRE-104274 PN (M) LTCOL VIRGILIO A ESTRELLA O-108494 PAF MAJ ANTONIO O TANAMOR JR PAF O-9676 MAJ ADRIANO S PEREZ JR O-9950 PA MAJ RODRIGO V QUINTILLA O-115693 PA MCPO Benjamin A Rosario 596854 PN

Participants in the AFP Uniform Seminar Workshop

Name GEN NARCISO L ABAYA AFP RADM ANTONIO R SIAPNO AFP COMMO EMILIO C MARAYAG AFP

R E S T R I C T E D

R E S T R I C T E D

428

BGEN HORACIO S TOLENTINO AFP BGEN ZOILO R BENAVIDEZ AFP COL HERNANIE B PEREZ PAF (GSC) COL HENRY A GALARPE PAF (GSC) COL EDUARDO B STO DOMINGO (INF) (JSSC) PA COL ALFREDO G RAMIREZ PAF (GSC) COL RAUL J AVELINO PA (GSC) COL FRANCIS R ABELLA (JCSC) PA CAPT DEMETRIO B BIDAN JR PN (GSC) COL ALFREDO G RAMIREZ PAF (GSC) COL JAIME E LARGO PAF (GSC) COL DOMINGO E DIMAPILIS JR PAF COL ARTHUR P MANCENIDO PAF (GSC) COL ESTELA L YUTADCO NC (GSC) COL RODOLFO O SANTOS MAC (GSC) COL AURELIO C SALLE DS (GSC) COL GUALBERTO M GRUSPE PA (GSC) COL JOSE B VIZCARRA PA (GSC) COL JOVITA J FERRER WAC CAPT GERONIMO L AGANON PN (GSC) LTC VIRGILIO A ESTRELLA PAF LTC DANTE D BALAO (INF) (GSC) PA LTC RAFAEL G TALIÑO (INF) (GSC) PA LTC RAFAEL A SERA JOSE (QMS) PA LTC ANDRE M COSTALES PN (M) CDR AMADITO L MANZON PN CDR EFREN S TEDOR PN (GSC) LTC BERNARDO C FERRER PN (M) LTC ANDRE COSTALES PN (M) LTC ROBERTO M LANTIN PAF LTC ALEXANDER O FLORES PAF (GSC) LTC LORENZO S GUMBA PAF (GSC) LTC ROMEO R ABAD PAF LTC ROSALINDO C ACACIO JR CHS (GSC) LTC ANTONIO E ENDONILLA (CAV) PA LTC DAN M BAGAPURO PAF LTC EDGARDO A ADAJAR PROF LTC ROMEO P PAJARITO PAF CDR VIRMIE P TORRALBA PN LTC CLAUDIO L YUCOT PA LTC LUIS VINCENT A TACDERAS PA CDR OTHELLO P LOPEZ PN MAJ REYNALDO G GETUABAN PA (QMS) MAJ ARTHUR M BIYO PN (M) MAJ RICARDO D PETROLA PN (M)

R E S T R I C T E D

R E S T R I C T E D

429

MAJ RODYER B DELA PENA PN (M) LCDR ADELIUS S BORDADO PN MAJ NICOMEDES A ALONZO PAF MAJ EDITHA D CALLANTA (WAC) MAJ ORLANDO D EDRALIN PA LT TEDDY G QUINZON PN CPT ELIAS C JUSON JR PN (M) CPT ARNEL N AGARPAO PAF LTJG MATEO G CARIDO PN LTJG NASSER T MACABUAT PN LTJG ELVIRA S RODRIGUEZ PN LT ELPIDIO B CARIÑO PN LT ENRIQUITO C NAMI PN LT GLORIA M PASTOR PN LT JOY DAVE T GABUELO PN LT SILVESTRE L RIBITE PN LT CLIFFORD A BATTUNG PN ENS ROMEO R OLIVA JR PN ENS BERNARDO S CARPIO PN 2LT ANTONIO A ABARRALOSO PAF P2LT ANTONIO ARTURO M GALIT JAGS CMSG Florante A Hatulan PAF CMS Eusebio M Alunan (INF) PA CMS Reynaldo A Aribon (OS) PA MCPO Leonardo R Apruebo PN

R E S T R I C T E D

R E S T R I C T E D

430

This page is intentionally left blank.