AEROSPACE ALUMINUM SOLUTIONS

2 www.aleris.com

ABOUT ALERIS

With more than 50 years of experience and know-how, we serve a variety of end-use industries, and are among the world’s leading suppliers of high-quality aluminum rolled products to the Aerospace industry.

In the Aerospace industry we specialize in the production of rolled aluminum plate and sheet materials for fuselage and wing structure components according to standard or customized specifi cations.

Aleris is a global leader in the manufacture and sale of aluminum rolled products, with manufacturing facilities across Europe, China and North America.

Sustainable solutions and closed loop recycling

www.aleris.com 3

GLOBAL FOOTPRINT WITH SUPPLY REDUNDANCY

GLOBAL PRESENCE TO ENABLE EFFICIENT SUPPLY CHAINS

ZHENJIANG,

CHINA

KOBLENZ,

GERMANY

Strategic growth platform in China

Global logisticsand supply chain

Aleris is helping our customers meet regional demand through two Aerospace industry certifi ed plants in Koblenz, Germany and Zhenjiang, China.

Aleris supplies the global Aerospace industry with advanced aluminum materials of the highest quality, which meet not only the industry’s high standards but also all conceivable individual customer specifi cations.

ALERIS’ ADVANTAGES AND CAPABILITIES INCLUDE

• Broad standard and advanced alloy portfolio

• Plate and sheet in a broad dimensional range

• Specialties: ultra-thick plates, wide sheets, wing plates

• Local production in Asia and Europe• Value added services: contour sawing,

pre-cutting/machining, drilling, sheet polishing, closed loop recycling

4 www.aleris.com

AEROSPACE ALUMINUM PLATE

Dimensional capabilities plateThickness up to 11.8” up to 300 mm

Width up to 138” up to 3,500 mm

Length up to 945” up to 24,000 mm

Other dimensions on request

The foundation of our Aerospace plate expertise resides in Koblenz, Germany, where Aerospace plate production started more than 30 years ago. Seizing the opportunity of projected growth in demand in Asia Pacifi c, we built our Zhenjiang facility in 2012. This investment also enables us to minimize supply risks due to the redundancy of both Aleris sites.

Since then, our dimensional and specifi cation capabilities were continuously extended. As an example Aleris is operating one of the world’s most powerful hot rolling mills in both sites, in Koblenz and Zhenjiang.

IMPROVED BUY-TO-FLY RATIO VIA CUT-TO-SIZE SHAPES AND CLOSED LOOPShape cutting and pre-machining can be offered to optimize cost effi ciency and to minimize metal yield at the customer site. Closed loop recycling concepts are available upon request.

WING PLATESBased on our capability to produce wide and long plates and our deep processing know-how Aleris offers high strength upper wing and high damage tolerant lower wing alloys in plates of various sizes and gauges for integral and built-up wing solutions. As a complementary service, wing plates can be supplied in shaped, surface machined or even tapered format.

ADVANTAGES OF ALERIS’ ALUMINUM ROLLED PLATES

• High strength and ductility

• Extremely low level of porosity for excellent fatigue performance

• Minimal residual stresses, practically no distortion after machining

2014

AMS 4029BS 2 L.93DMS 1580TH 5.313

2024

AIMS 03-02-004ABM 1-1005AIR 9048AMS 4035AMS 4037AMS 4041AMS 4462AMS-QQ-A-250/4AMS-QQ-A-250/5ASN-A3011BS 2 L.97BS 2 L.98CMS-AL-103DGQT 1.1.0.0036DAN 422EN 2419MEP02-035SMS 3204TH 5.312WL 3.1354YS-X-9001

2024 ALCLAD

AIMS 03-04-009AIMS 03-04-010AIMS 03-04-011AIMS 03-04-012AIMS 03-04-013AIMS 03-04-014AIMS 03-04-037AMS 4040AMS 4041AMS 4461AMS-QQ-A-250/5BAMS 516-026SMS 3200YS-X-9001

2124

AIMS 03-02-032AMS 4101AMS-QQ-A-250/29FMS 3002FMS 3008MMS 149MEP 02-029YS-X-9002YS-X-9004

2214

AIR 9048CR 1.1.031

2219

A5-SA-121-1039A5-SA-1331100-C-0019-MTAAMS 4031AMS 4295AMS-QQ-A-250/30DSN 1719.01MPS/2219/S&P/01SA-MU-42.549.04SMS 11920455 LV 09 003TS-AA2219

2219 ALCLAD

AMS 4096

2618

ABM 1-1006AIMS 03-02-021AIR 9048ASN-A 3355BAEM 1103DAN 422MEP02-020WL 3.1924

6061

AIR 9048AMS 4025AMS 4026AMS 4027AMS-QQ-A-250/11DAN 422WL 3.3214

7010

ABM 3-1029ABM 3-1030AMS 4204AMS 4205ASN-A3098ASN-A3101BAEM 1213BAEM 1218DAN 422DGQT 1.1.0.87D.T.D. 5120D.T.D. 5130EN 2684EN 2687OFWN 4017OFWN 4038SM 9102SMS 3206STD 113644TSM 42.03.66TSM 42.03.67TSM 42.03.71WL 3.4394

7020

AIR 9048

7050

AIMS 03-02-019AIMS 03-02-022AIMS 03-02-029ABM 3-1029ABM 3-1030AMS 4050AMS 4201ASNA 3048BAEM 1213BAMS 516-001BAMS 516-003BMS 7-323 Type IBMS 7-323 Type IIICMMP 010DAN 26FDAN 422DGQT 1.1.0.97DGQT 1.1.0.0098DMS 2233DMS 2459DON 45DSN 1106EAC-MS-1004EAC-MS-MP-0162EN 3982EN 3983KMB-SK2102MEP02-014 Std TypeMEP02-036

PLATE AND SHEET – BROAD SPECIFICATION PORTFOLIO

www.aleris.com 5

AEROSPACE ALUMINUM SHEET

From its Koblenz facility, Aleris offers a broad range of Aerospace sheet alloys and specifi cations, including wide sheets and further fabrication such as polishing.

HIGH QUALITY STANDARDS COMBINED WITH UNIQUE STATE-OF-THE-ART CAPABILITIES ENABLES ALERIS TO PROVIDE:

• Broad portfolio (dimensions and alloys)• Excellent surface properties (mill fi nished, bare, one side clad,

both sides clad, polished skin quality)

• High formability• Best chemical milling quality• Minimum residual stress-quality

(MRS)

Dimensional capabilities sheetWide sheet O/F-Temper T-Temper

Thickness 0.100”– 0.472” 2.5 –12.00 mm 0.100”– 0.472” 2.5 –12.00 mm

Width up to 136” up to 3,460 mm up to 130” up to 3,300 mm

Length up to 590” up to 15,000 mm up to 590” up to 15,000 mm

Standard coil sheet and wide coil sheet O/F-Temper T-Temper

Thickness 0.032”– 0.158” 0.8 – 4.00 mm 0.032”– 0.183” 0.8 – 4.64 mm

Width 36”– 102” 914 – 2,600 mm 36”– 89” 914 – 2,250 mm

Length 39”– 472” 1,000 – 12,000 mm 39”– 590” 1,000 – 15,000 mm

Other dimensions on request

MFM 0017MMS 1420MMS 1439M3184MM3184OFWN 4029OFWN 4037OFWN 4040STD 113643STM 0887TSM 42.03.69TSM 42.03.70WL 3.4144YS-X-9005YS-X-9006

7075

AIR 9048AMS 4044AMS 4045AMS 4078AMS 4315AMS-QQ-A-250/12AMS-QQ-A-250/13AMS-QQ-A-250/24ASN-A3009BS 2 L.95DAN 422EN 2126MMS 159STD 113627TH 5.316/3TH 5.316/5WL 3.4364

7075 ALCLAD

AMS 4048AMS 4049AMS-QQ-A-250/13AMS-QQ-A-250/25

7150

ABM 3-1031AMS 4252BAEM 1219BAMS 516-006DMS 2308

7175

AIMS 03-02-008ASN-A3050CR 1.1.0.88DAN 26HDAN 422OFWN 4033SMS 003WL 3.4364

7475

AIMS 03-02-009AIR 9048AMS 4089AMS 4090AMS 4202BAMS 516-002DAN 422DMS 2184DMS 2234DON 45FMS-3004MEP 02-013 Std. TypeMEP 02-013 Type IM3188MM3188OFWN 4057STD 113637TSM 42.03.68WL 3.4384YS-X-9003199-19-005

7475 ALCLAD

AIMS 03-04-029AMS 4085DMS 2234

6 www.aleris.com

YOUR RELIABLE PARTNER

Aleris Process Control (APC), one of our key elements of operational excellence, sets the basis for continuous improvement and ensures that production takes place under controlled conditions. This is essential to meet our goal to remain the reliable partner for the industry.

Certifi cations for the plants in Koblenz and Zhenjiang:

• DIN EN ISO 9001• EN 9100 / AS 9100 • DIN EN ISO 14001• NADCAP – Heat Treating• NADCAP – Non-destructive Testing

OUR HEALTH, SAFETY AND ENVIRONMENT SYSTEM

Our Safety and Environment Policy and Principles are implemented within our company and are also subject to continuous improvement. Certifi cations include ISO 14001 for both plants in Koblenz and Zhenjiang, as well as EMAS for the Koblenz plant.

RESEARCH & DEVELOPMENT: THE BASIS FOR INNOVATION

With focused research and development work we ensure that new products are continually introduced in order to help our customers achieve their performance targets.Aleris has concentrated its research and development work in fi ve innovation centers in Europe, Asia and North America, with our center at the Koblenz plant specifi cally dedicated to the Aerospace sector.

SUSTAINABILITY AND CLOSED LOOP RECYCLING

At Aleris, sustainability has always been core to our business. With both the know-how and the experience to partner with customers, we are helping to drive sustainable solutions.

To reduce the need for primary aluminum as well as manufacturing waste, Aleris works with customers to create closed loop processes, in which customers send their waste back to Aleris to be recycled into new products. Please refer to our Closed Loop brochure for further details.

Aleris can develop and test all major production and processing stages as pilot processes at the production scale.

SAFETY. QUALITY. EXCELLENCE. INTEGRITY.

www.aleris.com 7

THICK. STRONG. TOUGH. POLISHED. MACHINED.

Care has been taken to ensure that this information is accurate. Although any information or recommendation contained herein is given in good faith, we make no warranty or guarantee, express or implied, (i) that our products meet your specifi c requirements, and (ii) that the results described herein will be obtained under end-use conditions, and (iii) as to the effectiveness or safety of our products, services or recommendations. Except as provided in our general terms of sale and delivery, we shall not be responsible for any loss resulting from use of our products or services described herein. The materials, products and services described herein are sold subject to our general terms of sale and delivery, which can be found at https://www.aleris.com/locations and are available upon request.

© 2017, Aleris CorporationIssue 05/17 · 12th release

Sales Contact AsiaAleris (Shanghai) Trading Co., Ltd.Suite 3601-3602, SOHO Donghai PlazaNo. 299 Tongren RoadShanghai, 200040 · China T +86 21 2231 8000

Sales Contact Europe and AmericaPlant KoblenzAleris Rolled Products Germany GmbHCarl-Spaeter-Straße 1056070 Koblenz · GermanyT +49 261 891 7476

aerospace@aleris.comwww.aleris.com

Aleris Global Headquarters25825 Science Park Drive - Suite 400Cleveland, OH 44122-7392 · USAT +1 216 910 3400