Aerosmith® Anchors - SURE-SET ADHESIVES · 2021. 2. 26. · At Aerosmith Fastening Systems, your...

SURE-SET ® ADHESIVES

At Aerosmith Fastening Systems, your health and safety on the construction site, is job one. That’s why we ensure that all the adhesives we sell carry the highly recognized ICC-ES and Iampo Certified Approvals. What this means is that these products have gone through extensive and rigorous testing to not only ensure product quality, but more importantly when used appropriately,

GENERAL APPLICATIONS: Structural Applications in Cracked and Uncracked Concrete • Building Façades • Post Installed Rebar Connections • Crash Barriers • The Attachment of Structural Steel • Railings • Signage • Rebar Doweling • Sill Plate Attachments: Suitable for Horizontal, Vertical and Overhead anchoring applications.

• Can be used with Threaded Rod Diameter Range 3/8” – 1-1/4”

• Can be used with Reinforcing Rebar #3, #4, #5, #6, #7, #8 and #10

• Storage life is two years (24 Months) in dry conditions, when kept attemperatures ranging from 50°F to 77°F

• High Load Capacities (See ICC-ESR 4412) for performance data

• Easy access when using designed nozzle into predrilled holes

• Can be used in wet and or dry environments

• Sure-Set® Pure Epoxy enables the user more working time before adhesive set up

• High Bond Strengths when fully cured

BASE MATERIALS: Concrete • Hard Natural Stone • Solid Rock • Solid Masonry

APPROVALS AND LISTING: ICC-ES ESR-4412 Cracked and Uncracked Concrete Category 1

Code Compliant IBC Listed (International Building Code)

Code Compliant IRC Listed (International Residential Code)

Code Compliant FBC Listed (Florida Building Code)

Code Compliant FRC Listed (Florida Residential Code)

Code Compliant COLA Listed (City of Los Angeles)

Tested in accordance with AC308 and AC58 for use in structural concrete and masonry

REBAR INSTALLATION FOR BRIDGES, HIGHWAY AND TUNNEL REPAIRS

TYPICAL APPLICATIONS

2

AEROSMITH SURE-SET PURE EPOXY®

perform as intended with your safety and the safety of others at the forefront.

With that in mind, Aerosmith® is pleased to introduce its new line of Sure-Set® Pure Epoxy. In this brochure we will highlight proper installation instructions, loading requirements, curing times and all other general Adhesive anchoring guidelines, to help ensure your job goes as smooth as possible.

PRODUCT INFORMATION: Sure-Set® Pure Epoxy is a two-component 1:1 ratio pure epoxy bonded anchoring system for use in cracked and uncracked concrete under normal, as well as, seismic conditions (seismic category C1). Designed for most demanding structural applications and rebar connections, Sure-Set® Pure Epoxy, offers high load capacities when used in conjunction with Threaded Rod or Rebar or Steel Dowels. The Aerosmith ® Adhesive System includes a two part adhesive packaged within plastic cartridges, a mixing nozzle is also packaged in with each tube to ensure proper mixing occurs. Dispensing tools and hole cleaning equipment is also available to ensure proper installation. Sure-Set® Pure Epoxy is a 100% epoxy resin that has been formulated with no MXDA, Phenol, N-Methyl Pyrrolidone, Bisphenol A, Phthalates or VOCs. This formulation exhibits minimal shrinkage which makes it ideal for use with oversized holes. In addition, the extended gel time also allows convenient use in deep holes and when used in high ambient temperatures.

IMPORTANT INFORMATION:

® ®

AEROSMITH SURE-SETTM EPOXY

Resin Cartridge Temperature T Work Base Material Temperature T Load

+50 to +59°F 20 mins +50 to +59°F 24 hours







+104°F 3 mins +104°F 3 hours

CURE TIME

Note: T Work is typical gel time at highest base material temperature in the range. T Load is set at the lowest base material temperature in the range.

Part ID Product Cartridge size Carton Quanity

PE-10 Sure-Set® PE-10 10 oz (8.5 fluid onces) 12

PE-21 Sure-Set® PE-21 21 oz (21 fluid onces) 12

PURE EPOXY PRODUCT OFFERING

INSTALLATION INSTRUCTIONS

ANCHORING GUARD RAIL TO CONCRETE ANCHORING INTO HOLLOW BASE MATERIALS USING SCREEN TUBES

2x

2x

2x 2x

OR

Anchor Size 3/8 1/2 5/8 3/4 7/8 1 1 1/4

Nominal Diameter da inch 3/8 1/2 5/8 3/4 7/8 1 1 1/4

Characteristic Bond Strength in Uncracked Concrete tRk,uncr psi 1,350 1,350 1,350 1,350 1,350 1,350 1,350

Characteristic Bond Strength in Cracked Concrete

tRk,cr psi 1,150 1,090 1,025 965 900 840 715

Strength Reduction Factor ϕ - 0.65 0.65 0.65 0.65 0.65 0.65 0.65

Effective Embedment Depth Rangehef,min inch 2 3/8 2 3/4 3 1/8 3 1/2 4 4 5 hef,max inch 7 1/2 10 12 1/2 15 17 1/2 20 25

Effectiveness Factor for Uncracked Concrete

kuncrin-lb 24 24 24 24 24 24 24

SI 10 10 10 10 10 10 10

Effectiveness Factor for Cracked Concrete

kcrin-lb 17 17 17 17 17 17 17

SI 7.1 7.1 7.1 7.1 7.1 7.1 7.1

STRENGTH DESIGN VALUES IN TENSION & SHEAR -AEROSMITH PURE EPOXY PE-10/PE-21 ADHESIVE ANCHOR

Characteristic bond strengths are for dry concrete, Max. LTT = 110F (+43C); Max. STT = 130F (+55C).

3

®

Tension Design Strength in Dry Hole Condition inNormal Weight CRACKED CONCRETE

Drilled with Hammer Drill and Carbide BitTemperature Range 110F/130F (+43C/+55C)

1. Values provided are for illustration purposes only and apply to single anchors installed in normal weight concrete without reduction for close edge or anchor spacing.2. Calculations were performed according to ACI 318-14 Ch17 and ICC-ES AC308 for the load levels corresponding to the listed failure modes (Concrete Breakout Strength, Concrete Pryout Strength, and Bond Strength). This must be checked against the corresponding steel strength with the lowest load controlling.3. Tabular values are for static loads only. Periodic Special Inspection must be performed.4. Where anchors are subjected to combined tension and shear loads the interaction of shear and tension must be checked according to ACI 318-14 Ch17.5. Interpolation of tabulated values is not permitted.

Shear Design Strength in Dry Hole Condition inNormal Weight CRACKED CONCRETE


Nominal Size Embed. Depth Minimum Concrete Compressive Strength, f’c (psi)

2,500 3,000 4,000 6,000 8,000

(inch) (inch) ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

3/8 2 3/8 2,022 2,091 2,091 2,091 2,091

3/8 3 2,642 2,642 2,642 2,642 2,642

3/8 4 1/2 3,963 3,963 3,963 3,963 3,963

3/8 7 1/2 6,605 6,605 6,605 6,605 6,605

1/2 2 3/4 2,520 2,760 3,061 3,061 3,061

1/2 4 4,420 4,452 4,452 4,452 4,452

1/2 6 6,677 6,677 6,677 6,677 6,677

1/2 10 11,129 11,129 11,129 11,129 11,129

5/8 3 1/8 3,052 3,343 3,861 4,088 4,088

5/8 5 6,177 6,541 6,541 6,541 6,541

5/8 7 1/2 9,811 9,811 9,811 9,811 9,811

5/8 12 1/2 16,352 16,352 16,352 16,352 16,352

3/4 3 1/2 3,618 3,963 4,576 5,173 5,173

3/4 6 8,120 8,868 8,868 8,868 8,868

3/4 9 13,301 13,301 13,301 13,301 13,301

3/4 15 22,169 22,169 22,169 22,169 22,169

7/8 4 4,420 4,842 5,591 6,432 6,432

7/8 6 8,120 8,895 9,649 9,649 9,649

7/8 9 14,473 14,473 14,473 14,473 14,473

7/8 17 1/2 28,142 28,142 28,142 28,142 28,142

1 4 4,420 4,842 5,591 6,847 6,861

1 8 12,502 13,695 13,722 13,722 13,722

1 12 20,584 20,584 20,584 20,584 20,584

1 20 34,306 34,306 34,306 34,306 34,306

1 1/4 5 6,177 6,767 7,814 9,125 9,125

1 1/4 10 17,472 18,251 18,251 18,251 18,251

1 1/4 15 27,376 27,376 27,376 27,376 27,376

1 1/4 25 45,627 45,627 45,627 45,627 45,627


2,500 3,000 4,000 6,000 8,000

(inch) (inch) ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

3/8 2 3/8 1,928 2,112 2,252 2,252 2,252

3/8 3 2,869 3,142 3,629 4,444 5,132

3/8 4 1/2 5,270 5,773 6,666 8,164 8,535

3/8 7 1/2 11,339 12,422 14,226 14,226 14,226

1/2 2 3/4 2,697 2,955 3,412 4,179 4,825

1/2 4 5,100 5,587 6,451 7,901 9,123

1/2 6 9,369 10,263 11,851 14,382 14,382

1/2 10 20,159 22,083 23,970 23,970 23,970

5/8 3 1/8 3,584 3,926 4,534 5,552 6,411

5/8 5 7,969 8,729 10,079 12,345 14,088

5/8 7 1/2 14,639 16,036 18,517 21,132 21,132

5/8 12 1/2 31,498 34,505 35,220 35,220 35,220

3/4 3 1/2 4,590 5,028 5,806 7,111 8,211

3/4 6 11,475 12,570 14,514 17,776 19,099

3/4 9 21,080 23,092 26,665 28,649 28,649

3/4 15 45,358 47,748 47,748 47,748 47,748

7/8 4 6,032 6,608 7,630 9,345 10,791

7/8 6 12,018 13,165 15,201 18,618 20,782

7/8 9 22,769 24,943 28,801 31,172 31,172

7/8 17 1/2 60,613 60,613 60,613 60,613 60,613

1 4 6,279 6,878 7,942 9,727 11,232

1 8 20,399 22,346 25,803 29,556 29,556

1 12 37,476 41,053 44,334 44,334 44,334

1 20 73,890 73,890 73,890 73,890 73,890

1 1/4 5 9,810 10,747 12,409 15,198 17,549

1 1/4 10 31,874 34,916 39,309 39,309 39,309

1 1/4 15 58,556 58,964 58,964 58,964 58,964

1 1/4 25 98,273 98,273 98,273 98,273 98,273

CRACKED CONCRETE

4


2,500 3,000 4,000 6,000 8,000


ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

3/8 2 3/8 2,455 2,455 2,455 2,455 2,455

3/8 3 3,101 3,101 3,101 3,101 3,101

3/8 4 1/2 4,652 4,652 4,652 4,652 4,652

3/8 7 1/2 7,753 7,753 7,753 7,753 7,753

1/2 2 3/4 3,557 3,791 3,791 3,791 3,791

1/2 4 5,513 5,513 5,513 5,513 5,513

1/2 6 8,270 8,270 8,270 8,270 8,270

1/2 10 13,784 13,784 13,784 13,784 13,784

5/8 3 1/8 4,309 4,720 5,384 5,384 5,384

5/8 5 8,615 8,615 8,615 8,615 8,615

5/8 7 1/2 12,922 12,922 12,922 12,922 12,922

5/8 12 1/2 21,537 21,537 21,537 21,537 21,537

3/4 3 1/2 5,107 5,595 6,460 7,236 7,236

3/4 6 11,464 12,405 12,405 12,405 12,405

3/4 9 18,608 18,608 18,608 18,608 18,608

3/4 15 31,013 31,013 31,013 31,013 31,013

7/8 4 6,240 6,836 7,893 9,649 9,649

7/8 6 11,464 12,558 14,473 14,473 14,473

7/8 9 21,060 21,709 21,709 21,709 21,709

7/8 17 1/2 42,213 42,213 42,213 42,213 42,213

1 4 6,240 6,836 7,893 9,667 11,027

1 8 17,649 19,334 22,054 22,054 22,054

1 12 32,424 33,081 33,081 33,081 33,081

1 20 55,135 55,135 55,135 55,135 55,135

1 1/4 5 8,721 9,553 11,031 13,510 15,600

1 1/4 10 24,666 27,020 31,200 34,459 34,459

1 1/4 15 45,314 49,639 51,689 51,689 51,689

1 1/4 25 86,148 86,148 86,148 86,148 86,148


2,500 3,000 4,000 6,000 8,000


ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

3/8 2 3/8 1,928 2,112 2,439 2,644 2,644

3/8 3 2,869 3,142 3,629 4,444 5,132

3/8 4 1/2 5,270 5,773 6,666 8,164 9,427

3/8 7 1/2 11,339 12,422 14,343 16,700 16,700

1/2 2 3/4 2,697 2,955 3,412 4,179 4,825

1/2 4 5,100 5,587 6,451 7,901 9,123

1/2 6 9,369 10,263 11,851 14,514 16,760

1/2 10 20,159 22,083 25,499 29,688 29,688

5/8 3 1/8 3,584 3,926 4,534 5,552 6,411

5/8 5 7,969 8,729 10,079 12,345 14,255

5/8 7 1/2 14,639 16,036 18,517 22,679 26,187

5/8 12 1/2 31,498 34,505 39,843 46,388 46,388

3/4 3 1/2 4,590 5,028 5,806 7,111 8,211

3/4 6 11,475 12,570 14,514 17,776 20,527

3/4 9 21,080 23,092 26,665 32,658 37,710

3/4 15 45,358 49,687 57,373 66,798 66,798

7/8 4 6,032 6,608 7,630 9,345 10,791

7/8 6 12,018 13,165 15,201 18,618 21,498

7/8 9 22,769 24,943 28,801 35,274 40,731

7/8 17 1/2 61,737 67,629 78,092 90,920 90,920

1 4 6,279 6,878 7,942 9,727 11,232

1 8 20,399 22,346 25,803 31,603 36,492

1 12 37,476 41,053 47,404 58,058 67,039

1 20 80,636 88,332 101,997 118,752 118,752

1 1/4 5 9,810 10,747 12,409 15,198 17,549

1 1/4 10 31,874 34,916 40,318 49,379 57,018

1 1/4 15 58,556 64,145 74,069 90,715 104,749

1 1/4 25 125,993 138,019 159,371 185,550 185,550

Tension Design Strength in Dry Hole Condition inNormal Weight UNCRACKED CONCRETE


1. Values provided are for illustration purposes only and apply to single anchors installed in normal weight concrete without reduction for close edge or anchor spacing.2. Calculations were performed according to ACI 318-14 Ch17 and ICC-ES AC308 for the load levels corresponding to the listed failure modes (Concrete Breakout Strength, Concrete Pryout Strength, and Bond Strength). This must be checked against the corresponding steel strength with the lowest load controlling.3. Tabular values are for static loads only. Periodic Special Inspection must be performed.4. Where anchors are subjected to combined tension and shear loads the interaction of shear and tension must be checked according to ACI 318-14 Ch17.5. Interpolation of tabulated values is not permitted.

Shear Design Strength in Dry Hole Condition inNormal Weight UNCRACKED CONCRETE


UNCRACKED CONCRETE

5

GENERAL APPLICATIONS: For use in Structural Applications in Cracked and Uncracked Concrete (category 1) for Threaded Rod, Reinforcing Bars, & Steel Dowels • Suspended Ventilation Systems • Safety Barriers • Machinery & Heavy Machinery • Rolling Cranes • Structural Steel to Concrete Applications

• Is approved and listed for Cracked and Uncracked Concrete Category 1

• Can be used in Low and High Strength Concrete

• Product is Styrene Free

• Can be used in Dry and Wet Environments

• Can be used overhead with Epoxy resin stoppers

• Product has been Seismic Tested

• Product is Fire Resistant

• Product has a low odor formulation and can be use in both indoor and outdoor applications

• Product Mixes through dispensing nozzle, no premixing required

BASE MATERIALS: Concrete • Solid & Hollow Masonry (If using in hollow base material applications a Stainless Steel or Nylon Screen tube is needed to encapsulate the adhesive) • Hard Natural Stone • Solid Rock • Voided Stone or Rock

APPROVALS AND LISTING: IAPMO ER-668 For use in Cracked and Uncracked Concrete category 1

IBC Listed (International Building Code)

IRC Listed (International Residential Code)

FBC Listed (Florida Building Code)

FRC Listed (Florida Residential Code)

COLA Listed (City of Los Angeles)

Tested in accordance with AC308 and AC58 for use in structural concrete and masonry

REBAR DOWELING ON TRANSPORTATION PROJECTS

TYPICAL APPLICATIONS

AEROSMITH SURE-SET EPOXY ACRYLATE (

ACRYLIC)

6

® ®

At Aerosmith ® Fastening Systems, your health and safety on the construction site, is job one. That’s why we ensure that all the adhesives we sell carry the highly recognized ICC-ES and IAPMO

Certified Approvals. What this means is that these products have gone through extensive and rigorous testing to not only ensure product quality, but more importantly when used appropriately,

perform as intended with your safety and the safety of others at the forefront.

With that in mind, Aerosmith ® Fastening Systems is pleased to announce its new line of Sure-Set® Epoxy Acrylate (Acrylic), available in both 10 Ounce and 28 Ounce Cartridge sizes.

In this brochure we will highlight proper installation instructions, loading requirements, curing times and all other general Adhesive anchoring guidelines to help ensure that your job goes as smoothly as possible.

PRODUCT INFORMATION: The Sure-Set® Epoxy Acrylate (Acrylic) is the most environmentally friendly resin system within our range, at the same time it exhibits outstanding performance in concrete, masonry, and other sbase materials. It is ideally suited for high load/heavy duty structural anchoring applications. It can be used with Threaded Rod, Reinforcing bar, and Steel Dowels in solid base materials or in conjunction with an Aerosmith ® screen tube for hollow based anchoring applications. It is free of styrene’s, the Sure-Set® Epoxy Acrylate (Acrylic) formulation has a very low odor and is well suited for use indoors and in confined spaces. It also has a very low VOC content and no hazard symbols are required to be displayed on the product label, nor it is hazardous for any mode of transportation.The Sure-Set® Epoxy Acrylate (Acrylic) has not only been evaluated by Iampo, it has also been fire tested and has received fire resistance classification F120 (for use with threaded bars) & F240 (for use with rebars). For those operating in markets where American building codes are recognized, Epoxy Acrylate (Acrylic) can offer Evaluation Service Report from IAPMO ER-668.

IMPORTANT INFORMATION:

REBAR DOWELING ON TRANSPORTATION PROJECTS

AEROSMITH SURE-SETTM EPOXY ACRYLATE (ACRYLIC)

HIGH SPEED RAIL PROJECTS POST INSTALLED THREADED ROD AND REBAR APPLICATIONS

INSTALLATION INSTRUCTIONS

2x

2x

2x 2x

OR

CURE TIMEResin Cartridge Temperature T Work Base Material Temperature T Load

min 41°F 12 mins +23 to 32°F 24 hours

min 41°F 12 mins +32 to +41°F 180 minutes

+41 to +50°F 8 mins +41 to +50°F 100 minutes




+86°F 1 mins +86°F 40 minutes

+104°F 3 mins +104°F 3 hours

EPOXY ACRYLATE (Acrylic) PRODUCT OFFERINGPart ID Product Cartridge size Carton Quanity

ACR-10 Sure-Set® ACR-10 10 oz (8.5 fluid onces) 12

ACR-28 Sure-Set® ACR-28 28 oz (27.9 fluid onces) 8

Anchor Size 3/8 1/2 5/8 3/4 1 1 1/4

Nominal Diameter da inch 3/8 1/2 5/8 3/4 1 1 1/4

Characteristic Bond Strength in Uncracked Concrete tRk,uncr psi 1,320 1,237 1,154 1,070

Characteristic Bond Strength in Cracked Concrete

tRk,cr psi 598 817 769 720 623 518

Strength Reduction Factor ϕ - 0.55 0.55 0.55 0.55 0.55 0.45

Effective Embedment Depth Rangehef,min inch 2 3/8 2 3/4 3 1/8 3 1/2 4 5 hef,max inch 7 1/2 10 12 1/2 15 20 25

Effectiveness Factor for Uncracked Concrete

kuncrin-lb 24 24 24 24 24 24 24

SI 10 10 10 10 10 10 10

Effectiveness Factor for Cracked Concrete

kcrin-lb 17 17 17 17 17 17 17

SI 7.1 7.1 7.1 7.1 7.1 7.1 7.1

Note: Cartridge must be conditioned to minimum 41°F

STRENGTH DESIGN VALUES IN TENSION & SHEAR -AEROSMITH ACRYLIC ACRYLATE ACR-10/ACR-28 ADHESIVE ANCHOR

Characteristic bond strengths are for dry concrete, Max. LTT = 122F (+50C); Max. STT = 176F (+80C).

7

®

Shear Design Strength in Dry Hole Condition inNormal Weight CRACKED CONCRETE

Drilled with Hammer Drill and Carbide BitTemperature Range 122F/176F (+50C /+80C)


2,500 3,000 4,000 6,000 8,000


ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

3/8 2 3/8 920 920 920 920 920

3/8 3 1,162 1,162 1,162 1,162 1,162

3/8 4 1/2 1,744 1,744 1,744 1,744 1,744

3/8 7 1/2 2,906 2,906 2,906 2,906 2,906

1/2 2 3/4 1,941 1,941 1,941 1,941 1,941

1/2 4 2,823 2,823 2,823 2,823 2,823

1/2 6 4,235 4,235 4,235 4,235 4,235

1/2 10 7,058 7,058 7,058 7,058 7,058

5/8 3 1/8 2,595 2,595 2,595 2,595 2,595

5/8 5 4,152 4,152 4,152 4,152 4,152

5/8 7 1/2 6,228 6,228 6,228 6,228 6,228

5/8 12 1/2 10,381 10,381 10,381 10,381 10,381

3/4 3 1/2 3,266 3,266 3,266 3,266 3,266

3/4 6 5,598 5,598 5,598 5,598 5,598

3/4 9 8,397 8,397 8,397 8,397 8,397

3/4 15 13,996 13,996 13,996 13,996 13,996

1 4 4,306 4,306 4,306 4,306 4,306

1 8 8,612 8,612 8,612 8,612 8,612

1 12 12,918 12,918 12,918 12,918 12,918

1 20 21,529 21,529 21,529 21,529 21,529

1 1/4 5 4,577 4,577 4,577 4,577 4,577

1 1/4 10 9,154 9,154 9,154 9,154 9,154

1 1/4 15 13,731 13,731 13,731 13,731 13,731

1 1/4 25 22,885 22,885 22,885 22,885 22,885


2,500 3,000 4,000 6,000 8,000


ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

3/8 2 3/8 1,171 1,171 1,171 1,171 1,171

3/8 3 2,830 2,959 2,959 2,959 2,959

3/8 4 1/2 4,438 4,438 4,438 4,438 4,438

3/8 7 1/2 7,397 7,397 7,397 7,397 7,397

1/2 2 3/4 2,559 2,804 3,237 3,965 4,578

1/2 4 4,839 5,301 6,121 7,187 7,187

1/2 6 8,890 9,739 10,780 10,780 10,780

1/2 10 17,967 17,967 17,967 17,967 17,967

5/8 3 1/8 3,136 3,435 3,966 4,858 5,609

5/8 5 7,253 7,945 9,174 10,569 10,569

5/8 7 1/2 13,324 14,596 15,854 15,854 15,854

5/8 12 1/2 26,424 26,424 26,424 26,424 26,424

3/4 3 1/2 3,724 4,079 4,710 5,769 6,662

3/4 6 9,981 10,934 12,625 14,250 14,250

3/4 9 18,336 20,086 21,375 21,375 21,375

3/4 15 35,626 35,626 35,626 35,626 35,626

1 4 4,462 4,888 5,644 6,912 7,981

1 8 17,038 18,664 21,552 21,921 21,921

1 12 31,301 32,881 32,881 32,881 32,881

1 20 54,802 54,802 54,802 54,802 54,802

1 1/4 5 6,520 7,142 8,247 10,101 11,663

1 1/4 10 26,080 28,479 28,479 28,479 28,479

1 1/4 15 42,718 42,718 42,718 42,718 42,718

1 1/4 25 71,196 71,196 71,196 71,196 71,196

Tension Design Strength in Dry Hole Condition inNormal Weight CRACKED CONCRETE

Drilled with Hammer Drill and Carbide BitTemperature Range 122F/176F (+50C /+80C)

1. Values provided are for illustration purposes only and apply to single anchors installed in normal weight concrete without reduction for close edge or anchor spacing.2. Calculations were performed according to ACI 318-14 Ch17 and ICC-ES AC308 for the load levels corresponding to the listed failure modes (Concrete Breakout

Strength, Concrete Pryout Strength, and Bond Strength). This must be checked against the corresponding steel strength with the lowest load controlling.3. Tabular values are for static loads only. Periodic Special Inspection must be performed.4. Where anchors are subjected to combined tension and shear loads the interaction of shear and tension must be checked according to ACI 318-14 Ch17.5. Interpolation of tabulated values is not permitted.

CRACKED CONCRETE

8

Tension Design Strength in Dry Hole Condition inNormal Weight UNCRACKED CONCRETE


1. Values provided are for illustration purposes only and apply to single anchors installed in normal weight concrete without reduction for close edge or anchor spacing.2. Calculations were performed according to ACI 318-14 Ch17 and ICC-ES AC308 for the load levels corresponding to the listed failure modes (Concrete Breakout Strength, Concrete Pryout Strength, and Bond Strength. This must be checked against the corresponding steel strength with the lowest load controlling.3. Tabular values are for static loads only. Periodic Special Inspection must be performed.4. Where anchors are subjected to combined tension and shear loads the interaction of shear and tension must be checked according to ACI 318-14 Ch17.5. Interpolation of tabulated values is not permitted.


2,500 3,000 4,000 6,000 8,000


ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

ϕNa orϕNcb (lbs)

3/8 2 3/8 2,031 2,031 2,031 2,031 2,031

3/8 3 2,566 2,566 2,566 2,566 2,566

3/8 4 1/2 3,849 3,849 3,849 3,849 3,849

3/8 7 1/2 6,415 6,415 6,415 6,415 6,415

1/2 2 3/4 2,939 2,939 2,939 2,939 2,939

1/2 4 4,275 4,275 4,275 4,275 4,275

1/2 6 6,412 6,412 6,412 6,412 6,412

1/2 10 10,687 10,687 10,687 10,687 10,687

5/8 3 1/8 3,894 3,894 3,894 3,894 3,894

5/8 5 6,231 6,231 6,231 6,231 6,231

5/8 7 1/2 9,347 9,347 9,347 9,347 9,347

5/8 12 1/2 15,578 15,578 15,578 15,578 15,578

3/4 3 1/2 4,853 4,853 4,853 4,853 4,853

3/4 6 8,320 8,320 8,320 8,320 8,320

3/4 9 12,480 12,480 12,480 12,480 12,480

3/4 15 20,799 20,799 20,799 20,799 20,799

1 4

Not Applicable1 8

1 12

1 20

1 1/4 5

Not Applicable1 1/4 10

1 1/4 15

1 1/4 25

Shear Design Strength in Dry Hole Condition inNormal Weight UNCRACKED CONCRETE



2,500 3,000 4,000 6,000 8,000


ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

ϕVcp orϕVcb (lbs)

3/8 2 3/8 1,903 2,084 2,407 2,585 2,585

3/8 3 2,830 3,100 3,580 4,385 5,063

3/8 4 1/2 5,199 5,696 6,577 8,055 9,301

3/8 7 1/2 11,188 12,255 14,151 16,328 16,328

1/2 2 3/4 2,559 2,804 3,237 3,965 4,578

1/2 4 4,839 5,301 6,121 7,497 8,657

1/2 6 8,890 9,739 11,245 13,773 15,903

1/2 10 19,129 20,955 24,196 27,203 27,203

5/8 3 1/8 3,136 3,435 3,966 4,858 5,609

5/8 5 7,253 7,945 9,174 11,236 12,974

5/8 7 1/2 13,324 14,596 16,854 20,642 23,792

5/8 12 1/2 28,669 31,405 36,264 39,653 39,653

3/4 3 1/2 3,724 4,079 4,710 5,769 6,662

3/4 6 9,981 10,934 12,625 15,462 17,854

3/4 9 18,336 20,086 23,194 28,406 31,766

3/4 15 39,453 43,219 49,905 52,944 52,944

1 4

Not Applicable1 8

1 12

1 20

1 1/4 5

Not Applicable1 1/4 10

1 1/4 15

1 1/4 25

CRACKED CONCRETE UNCRACKED CONCRETE

9

AEROSMITH SURE- SETTM ACCESSORIES

SCREEN TUBES - STAINLESS STEEL

Part ID Description Box Quanity

386SCREEN 3/8 x 6 300 Stainless Steel Screen 25






PURE EPOXYDISPENSING TOOLS

Part ID Description Box Quantity

DT10 Sure-Set Manual Dispensing Tool 10 oz 1


DTHD10 Sure-Set Heavy Duty Dispensing Tool 10 oz 1

DT10 DT28

DTHD10Part ID Description Box Quanity

716BRUSH 3/8 Brush - 7/16 Hole 1




1BRUSH 7/8 Brush - 1 Hole 1

118BRUSH 1 Brush - 1 1/8 Hole 1

138BRUSH 1 1/4 Brush - 1 3/8 Hole 1


HOLE CLEANING BRUSHES

PURE EPOXY MIXING NOZZLES

Part ID Description Bag Quanity Carton Quanity

MN1021Mixing Nozzle for 10 and

21 ounce Pure Epoxy 5 25

MN1021LMixing Nozzle for 10 and 21

ounce Purer Epoxy (Deep Holes)5 25 EPOXY STOPPERS

Part ID Description Box Quanity Carton Quanity

ES18 18MM Epoxy Stoppers overhead 10 100



EXTENSION TUBES


ET38 3/8 inch Extension Tubing 1 12


10

®

®

®

®

AEROSMITH SURE-SETT

SET ACCESSORIESEPOXY ACRYLATE (ACRYLIC)

SCREEN TUBES - STAINLESS STEEL








DISPENSING TOOLS

Part ID Description Box Quantity



DTHD10 Sure-Set Heavy Duty Dispensing Tool 10 oz 1

DTHD22 Sure-Set HD Manual Dispensing Tool 22 oz 1

DT10 DT22

DTHD10DTHD22

ACRYLIC MIXING NOZZLES

Part ID Description Bag Quanity Carton Quanity

MNA10Mixing nozzle for 10 Ounce

Acrylic Adhesive 5 25

MNA28Mixing nozzle for 28 Ounce

Acrylic Adhesive 5 25

EPOXY STOPPERS










1BRUSH 7/8 Brush - 1 Hole 1

118BRUSH 1 Brush - 1 1/8 Hole 1



HOLE CLEANING BRUSHES

EXTENSION TUBES




11

®

®

®

®

®

Revised 02/2021

www.aerosmithfastening.comToll Free (844) 373-2666

Aerosmith Fastening System5621 Dividend Road, Indianapolis, Indiana 46241

(317) 390-6980

[email protected]

Aerosmith® Anchors - SURE-SET ADHESIVES · 2021. 2. 26. · At Aerosmith Fastening Systems, your...

Documents

Transcript of Aerosmith® Anchors - SURE-SET ADHESIVES · 2021. 2. 26. · At Aerosmith Fastening Systems, your...