_AEML8186 20070928 (1)

ARTICLE DESCRIPTION - LO TechPack reviewed (p)

Status: / Finalisation Sample 26.09.2007

AEML8186 ( 24768 ) Woven Pant / Factory: SINTEX INTERNATIONAL/CHINA

Priority:N Season:Date:Page:

28.09.20070001

08 / 02

R3 Dev.:Sample S.: CAD:Size Page:Sizes (src):

Pattern Info:

Product Type: Gender / Age Group:42;46;50;54;58;62

54 Lyster, Jane Wilton, Tony

(IMO409XF08) INT.MEN´S OUTDOOR PANTS WOVEN ZIP-UP (06.06.2007)

Pants (1/1) Male / Adults

Bottom Front Bottom Back

adidas PROPRIETARY AND CONFIDENTIAL INFORMATION: This document contains proprietary and confidential information belonging exclusively to adidas. If you are not an intended and authorized recipient of this document, you are hereby notified that any dissemination, copying or use of any information in this document is strictly prohibited by law. If you have received this document in error or without authorization, please immediately notify adidas. © by adidas AG, 2007

Detail Sketches:


Status: / Finalisation Sample 26.09.2007AEML8186 ( 24768 ) Woven Pant / Factory: SINTEX INTERNATIONAL/CHINA

Season:

Date:

Page:

28.09.2007

0002

08 / 02

Artwork 7774 - Elelement 101

Print line 1

Detail-Sketch-No.:

Position:

Description:

Artwork 7774 - Element 202

Print line 2

Detail-Sketch-No.:

Position:

Description:


Detail Sketches:



Season:

Date:

Page:

28.09.2007

0003

08 / 02

Artwork 7774 - Element 303

Print line 3

Detail-Sketch-No.:

Position:

Description:

Inner waistband to either side4

Inner elastic adjusters

Detail-Sketch-No.:

Position:

Description:


632936Part - Definition / B.O.M Article No.Q3

CCN1

Season:

Date:

Page:

28.09.2007

0004

08 / 02ARTICLE DESCRIPTION - LO TechPack reviewed (p)


MaterialCaution:does not meet wet crocking standard magnet f08-

rMain body, front and back, waistband, belt loops &010 2.04 yd; !

Ref. No.: 27821 ; woven ; 100% CO ; twill ; 281 g A239pocket weltspeached face ; Tai Yuen (Taiwan) ; #7008S ; 57 "Wp126 x Wt 5420/1 (Carded Yarn) x 10/1 (Open End Yarn)Ref.No: 27821, see Part.No 10 for details rbk redFor piping to outer centre back verticle seam to021 0.05 yd; !

A1Q6yolk. Please see sketch

(! = Special Material Usage Only)(* = Reference Material not yet tested by adidas-lab)

AccessoryRef. No.: 24184 ; button ; plastic button1 button fastening to inner waisband200 1 pcsN - Engraved hard Plastic Button design ; ABS(not visible)W x H: 1.20 x 1.20 cmButton internationalPlease see detailed work sheet foradjuster detail

magnet f08-r

10: main col

A239Ref. No.: 01630 ; button, 4 holes ; plainButtons to adjuster system on the inner202 3 pcsL - Horn - Imitation ; plastic ; W : 12.70 mmwaistband of the garment. 1 buttons toSourced by garment makereither side. 1 spare attached to innerQD05WCLDynastyWyseNung Lai

magnet f08-r

10: main col

A239Ref. No.: 11926 ; elasticPleaced to inner waistband, x1 to either205 2 cmelastic, specific designside of waist to adjust waistbandL - elastic with button holes ; polyesterW : 25.00 mmSourced by garment maker



CCN1

Season:

Date:

Page:

28.09.2007

0005



AccessoryPlease see detailedd sketch.205Ref. No.: 20839 ; hook & bar ; Metal hook and barHook and bar fastening to the CF210 1 pcsL-for ADDC, hook and bar for trouserwaistband.metal - nickel freeSourced by garment makerRef. No.: 16935 ; zipper, coil 3, closed endTo fly opening220 1 pcsautomatic lock ; N - small basic YKK pullenamel finishYKK CFC-36 DA E P12concealedConcealed by fly

magnet f08-r

20: zipper tape & teeth

A239Ref. No.: 26835 ; badge, woven ; woven badgeApplied to back of garment, 2.5cm below230 1 pcsas sample ref7059 ; 100% PESback welt pocket on right hand side asW x H: 25.00 x 25.00 mmwornPaxarAdditional colour 2 (pantone 1) - Coatssylko metallic MT014

black10: backgroundA1R8magnet f08-r

20: add col 1

A239pantone 130: add col 2A0ZB

(all msmts given for sample size only - for production msmts pls see size spec!)

WorkmanshipButton threads400

Cross over thread toapply pt#200 & pt#202 buttons

Thread colour to be Magnet



CCN1

Season:

Date:

Page:

28.09.2007

0006



WorkmanshipwaistbandTo edge of waist410

Pt#10 waistband with extended frontstorm to inner

4cm deep cut & sew waistband with buttonto inside & hook & bar to placket edge

To have internal elastic adjusters with1x button to each side. Please seedetailed sketches

To have a seam at the CB as well as sideseamsbelt loopx4 to back waistband420

x2 to front waistbandconcealed zipper flyTo CF opening430

Standard concealed fly with pt#210 & 200to fasten at waistband & zipper 16935.dartTo inner, back of pant440

Non functional dart starting from Centreback rise seam & exending by 21cm oneach side, so whole dart is 34cmpipingTo outer centre back seam445

pt#21, 0.3cm pipingvertical bartackTo either end of dart (pt#440) at back450lockstitchTo upper part of pt#440 (dart at back)4601,5 mm (edge)

To outer edge of welt pocket to back &front of garment



CCN1

Season:

Date:

Page:

28.09.2007

0007



Workmanshipwelt pocket1x To either side at front (2x in total)470

Back pocket is to finish at same point1x to left hand side at back of garment.as dart on the left hand side as worn.lockstitchTo Hem of pant48025 mm (1")

ArtworkLogo 7244Placed, 2.5cm in from left hand side600

pocket at front as worn, 2.5cm down fromRaised embroidery RBKpocket openingHIGH BUILD EMBROIDERY black10: RBK EMB

A1R820: Foam fill (as per approved quality)

Logo 7906 XS-XXLSize:Printed to whole of inner waistband6104cmHeight:only.

3-Colour print 52cmWidth:Please see ftp site for details

Flat print reflective poolf08-r

10: Print line 1 - Please see detailed sketch

A23EFlat print stucco20: Print line 2 - Please see detailed sketch

A1R4Flat print rbk red30: Print line 3 - Please see detailed sketch

A1Q6Logo 7049 XS-XXLSize:Applied centrally to back neck, 1.5cm620

7.5cmHeight:down from back neck seamBack neck label 4.7cmWidth:matallic print pure silver10: RBK & working

A1TUFlat print black20: Background print

A1R8


Artwork Sketches:

Season:

Date:

Page:

28.09.2007

0008

For size indication please refer to the artwork description in B.O.M.



600 Artwork:Logo 7244Part No.: 610 Artwork:Logo 7906Part No.: 620 Artwork:Logo 7049Part No.:


IMO409XF08 MEN´S PANTS WOVEN

released:CAD Pattern:

Basic Pattern:

Wilton, Tony 24.09.2007 17:05:09 07.09.2007 17:47:14 26.07.2007 13:30:5625.05.2007

ARTICLE DESCRIPTION - LO TechPack …


International ProtoSizeSpec No.: 1

revised:

all msmts in cm

Season:

Date:

Page:

28.09.2007

0010

08 / 02

All main seams 1cm

Shrinkage (incl. in pattern) Length: Width:Pattern:

Size-Spec.:



Basic Pattern:

Wilton, Tony


24.09.2007 17:05:09 07.09.2007 17:47:14 26.07.2007 13:30:5625.05.2007




revised:

all msmts in cm

Season:

Date:

Page:

28.09.2007

0011

08 / 02

German Sizes

Sourcing Sizes



Basic Pattern:

Wilton, Tony


24.09.2007 17:05:09 07.09.2007 17:47:14 26.07.2007 13:30:5625.05.2007

ARTICLE DESCRIPTION - LO …



revised:

all msmts in cm

Season:

Date:

Page:

28.09.2007

0012

08 / 02

German Sizes

Sourcing Sizes





Basic Pattern:

Wilton, Tony 24.09.2007 17:05:09 07.09.2007 17:47:14 26.07.2007 13:30:5625.05.2007 revised:

SizeTabel No.: 1


Measurements Points Sample Size Newmsmt

Diff/1st

Newmsmt

Newmsmt

Diff/2nd

Diff/3rd

Diff/4th

Newmsmt

Season:

Date:

Page:

28.09.2007

0013

08 / 02

Diff/6th

Finalmsmt

Diff/5th

Newmsmt

German Sizes Toleran… 54 54

Sourcing Sizes +/- 54 54

UK Sizes L L

Waistband widthA +2.0/ -1.0 +0.5 +5.093,0 96.0

Waistband heightB +0.5/ -0.5 4,0 4,0

Hip widthC 120.0+2.0/ -1.0 +1.0 -3.0119,0 120.0

Thigh widthD 74.8+1.0/ -0.5 +3.0 +4.071,0 74.8

Leg opening longE 54.0+1.0/ -0.5 +5.022,5 54.0

Side seam longF +2.0/ -1.0 +1.0 -1.0111,0 111,0

Inseam longG 83.0+2.0/ -1.0 +1.179,5 83.0

Front rise (meas. along seam,incl w/b)H 29.5+0.5/ -0.5 +0.533,0 29.5

Back rise (meas.along seam,incl w/b)I: 44.0+0.5/ -0.5 +0.542,0 44.0

Knee width (meas.44,5cm from hem )K 58.6+0.5/ -0.5 +6.050,0 58.6

Front zip lengthL: ----- 0.016,0 16,0

Pocket zip / openingM ----- 0.016,0 16,0

cuff depth 2.5----- +1.51,0 2.5


"+"= too long/too wide"-"= too short/too tight"*"= unequal between left and right

Size Spec differs in above measurements !



Material Information

Season:

Date:

Page:

28.09.2007

0014

08 / 02

27821Ref.No.

100% COComposition:wovenTechnolgy:twillConstruction:

peached faceFinishing:

Coating:Grain:

281Weight: g/sqmThickness: mmHardness:

Reebok EUR - Lifestyle - pilling=grade3. wet crocking2(dark colour), light fastness3Remark:

No.

SupplierSupp.Ref.

WidthYarn TypeDensityGauge

Yarn Count

Reference Fabric1

Tai Yuen (Taiwan)#7008S

57 "

Wp126 …0

20/1 (Carded Yarn) x 10/1 (Open End Yarn)

Supplier Specific Data:

Part No.: 10 / 21

US Rainweartest

Stitch CountUS Customs


Hangtags:



Season:

Date:

Page:

28.09.2007

0015

08 / 02

R0000002 RBKHT.02 (RBK HANGTAG COVER) hangtags to be attached to the underlayer of size label EMEA

R0000002 RBKHT.02 (RBK HANGTAG COVER) hangtags to be attached to the underlayer of size label NAM

R0000002 RBKHT.02 (RBK HANGTAG COVER) hangtags to be attached to the underlayer of size label ASPA

R0000002 RBKHT.02 (RBK HANGTAG COVER) hangtags to be attached to the underlayer of size label Japan

R0000002 RBKHT.02 (RBK HANGTAG COVER) hangtags to be attached to the underlayer of size label LAM

R0000002 RBKHT.02 (RBK HANGTAG COVER) hangtags to be attached to the underlayer of size label CDN


Lyster, Jane 30.05.2007released byAD release Confirmed by: Fong, Christine (SH) 31.05.2007

SINTEX INTERNATIONAL/CHINAfor Development Center:

DE

Season:

Date:

Page:

28.09.2007

0016



Mathieu - AD releasedAttention


Peppel, Edith van de 20.06.2007released byQuota Confirmed by: Zhou, Echo 2007.06.22


CU

Season:

Date:

Page:

28.09.2007

0017



Q (D) upd to: (RC):6Quota


Lyster, Jane 28.06.2007released byAdditional comment Confirmed by: Zhou, Echo (Shanghai) 2007.06.29


DE

Season:

Date:

Page:

28.09.2007

0018



EchoAttention

Artwork added & completeArtwork


Lyster, Jane 30.07.2007released by1st Prototype Confirmed by: Zhou, Echo (Shanghai) 01.08.2007


DE

Season:

Date:

Page:

28.09.2007

0019

08 / 02

CAD Pattern: Wilton, Tony



LARGESizes

*Please see size table for differences and updatesSize Spec

*Please refer to spec and ensure all measurements are within tolerance for PFR samplesSample Measurements

*Spec to be ammended to suit style AEML8168 - please see revisions*This garment is NOT FIT APPROVED.Sample Fitting*Spec to be ammended to suit style AEML8168 - please see revisions

Measurements to be brought back to spec for future samplesPt#21 has been added into AD. This is for piping to back seamMaterialPt#20 has been removed (contrast colour inner waistband)- Pt#205 has been added in as a internal adgusterAccessory- Pt#200 quantity have been reduced- Pt#202 has been added in for adjuster & spare button- Front fastning at waist is incorrect. This should extend more on the inside so the inner storm toWorkmanshipplacket is 7cm deep. The button should be on the inner & the Hook & bar should be on the edge of theplacket (opposite to PPR sample).- Contrast colour piping has been added into centre back seam- Contrast colou inner waistband has been amended to be self colour- Pocket to back should only be 14cm long. Please amend on PFR samples- Adjusters to outer waistband have been taken off & adjusters to inner have been added in (pleasesee AD & detailed sketch)- Please ensure that top threads are the correct coats colour- Belt loops have been added to front & back of pant x4 to back, x2 to front. Please see AD & sketch- Thread colour to apply buttons has been amended to be dyed to match instead of tonal


Lyster, Jane 30.07.2007released by1st Prototype Confirmed by: Zhou, Echo (Shanghai) 01.08.2007


DE

Season:

Date:

Page:

28.09.2007

0020

08 / 02




All logos missing. Please submit all outstanding logos.Artwork

Please apply all PPR & Fit comments to PFR samples. Please submit all logos & ensure that they areRemarksapplied to PFR samples.


Sweeney, Ed 31.07.2007released byQuota Confirmed by: Zhou, Echo (Shanghai) 01.08.2007


CU

Season:

Date:

Page:

28.09.2007

0021



Q (US) upd to: (RC):347Quota


Lyster, Jane 26.09.2007released byFinalisation Sample Confirmed by: Zhou, Echo (Shanghai) 27.09.2007


DE

Season:

Date:

Page:

28.09.2007

0022

08 / 02




EchoAttention

Article #632936, colourway magnet reviewedArticle no´s

- size 54Sizes

- Please see updated spec for any ammendmentsSize Spec

- All measurements to be brought back to spec for future samples.Sample Measurements

- Please check the patterns for measurements as the sample is not measuring to spec. If alterationsneeded please see sketch as to were we wish the ammendment to be made.- This garment is NOT FIT APPROVED.Sample Fitting

- Please ensure that piping to back yolk is a good colour match to lab dipMaterial- Please ensure that waistband is 4cm deep- Pt#210, badge #7029, fill colour shoule be magnet & RBK lettering should be matallic thread.AccessoryPlease re-look at work sheets & resubmit- Button to inner waist adjuster - Please ensure that spare button is attached to wash care label- Please ensure that the correct coats recommended thread colour is used & the same is used for theWorkmanshipbar tacs- Please ensure that dart seams are as neat as possible- Adjuster to inner waistband is not quite right. End of elastic should entre back into waistband.Please relook at sketch & I will send seperate photo to demonstrate- Piping to back yolk should be 0.3mm not 0.8mm- Back neck print #7049 Missing from sample. This is approved as per strike off sent 6/9/07ArtworkItem#633342.- RBK Raised emb #7422 Approved as per strike off sent 26/7/07 Item#6480 But this is not confirmedas PVC free fill. This must use a PVC free fill. Please submit


for sketches / measurement table please see next page

Lyster, Jane 26.09.2007released byFinalisation Sample Confirmed by: Zhou, Echo (Shanghai) 27.09.2007


DE

Season:

Date:

Page:

28.09.2007

0023

08 / 02




- Logo 7906 Inner waistband print is missing off sample. Please apply to new fit sample- Hang tag is missing. Please see Hang tag information on RMSHangtag

- Global back neck label should be in side seam, not back neckLabeling and Packaging- Size label should be in back neck, not side seam & this should be the global size label- Please ensure that the correct wash care info & fabric comp is applied onto wash care label inside seam

*Please see L&P on RMS for correct label information & ensure that this is correct for furthersampies*Please apply all fit & PFR comments to further samplesRemarks

- Waistband print is high. Please re-cost for new designCosting Remark


Lyster, Jane 26.09.2007released:Finalisation Sample Confirmed by LO-User: Zhou, Echo (Shanghai) 27.09.2007



DEV:


Season:

Date:

Page:

28.09.2007

0024

08 / 02


_AEML8186 20070928 (1)

Documents

Transcript of _AEML8186 20070928 (1)