Advanced Science. Advanced Grease Lubrication. · Petro-Canada’s Commitment to the Environment...
Transcript of Advanced Science. Advanced Grease Lubrication. · Petro-Canada’s Commitment to the Environment...
A Guide to Petro-Canada’s High-Performing Grease Solutions.
Advanced Science. Advanced Grease Lubrication.
The art and science of crafting grease
Commitment
Your machinery is the heart of your business. You need it to keep running at maximum operating effi ciency. You want to extend the life of your equipment and minimize maintenance costs. At Petro-Canada, we understand. We’ve been manufacturing some of the best greases in the world for over 50 years. In that time, we’ve created a line of greases that exhibit outstanding performance in a variety of situations. There are greases that last longer, resist water washout and deliver superior surface protection. There are greases that are specially designed for the harshest industrial conditions. Whatever your lubrication challenge Petro-Canada has the grease solution.
Purity
Petro-Canada’s greases are free from the impurities that hinder performance. It all begins with 99.9% pure, crystal-clear base oils produced from the patented HT Purity process and results in technically superior lubricants with longer-lasting protection that have the potential to increase your productivity and save you money. Petro-Canada produces over 350 different products and has over 25 years experience producing advanced lubricants from ultra-pure base oils and specialty additives.
Table of Contents
Petro-Canada Greases
Precision Synthetic: Multi-Application, Widest Temperature and Best Protection ..... 4 - 5
Precision XL: Wide Temperature and Great Protection ................................................ 6 - 7
Peerless: High Temperature and Wet Environment ...................................................... 8 - 9
Purity FG: Food and Environment .............................................................................. 10 - 11
Vultrex OGL: Mining and Mill Applications................................................................. 12 - 13
Vultrex MPG: Mining/Heavy Industry/Specialty Applications .................................. 14 - 15
Industry Applications .................................................................................................. 16 - 17
Petro-Canada’s Commitment to the Environment .................................................... 18 - 19
Craftsmanship
Petro-Canada grease crafters combine these ultra-pure base oils with other selected oils, synthetic fl uids, and the highest grade additives in an advanced multiphase batch process that is equal parts art and advanced science. Batch processing is a traditional form of grease manufacture but at Petro-Canada it’s anything but old fashioned. Batch processing lets our grease crafters take advantage of the properties of the ultra-pure base oils. The combination of premium ingredients with years of experience and a commitment to research and development delivers the solutions industry demands: less wear on equipment and tangible savings for your operation.
3
PRECISION* Synthetic
0
20
40
60
80
100
120
PC PRECISION Synthetic’s long life under high temperature provides long-lasting equipment protection
Tim
e (H
our)
ASTM D3527 Bearing Life Performance Test at 160˚C (320˚F), 1000 rpm speed and 111 N thrust load
NLGI Standard ASTM D4950 – Minimum requirement for GC-LB rating
Passed NLGI GC-LB
Failed NLGI GC-LB
CompetitivePremiumProduct
CompetitivePremiumProduct
CompetitivePremiumProduct
PC PRECISIONSynthetic
Advanced science for superior protection and performance.
PREC
ISIO
N SY
NTHE
TIC:
MUL
TI-A
PPLI
CATI
ON, W
IDES
T TEM
PERA
TURE
AND
BES
T PRO
TECT
ION
PRECISION* greases such as Synthetic, XL EP1 and EP2 deliver exceptional protection – whatever the conditions. Whatever the application.
Better long life protection.
• PRECISION greases last up to 3 times longer than other brands, and stay in place even under the most challenging operating conditions. The result is reduced re-greasing frequencies, therefore lower maintenance costs and extended equipment life.
Better water washout protection.
• PRECISION greases provide superior performance that has been demonstrated over leading competitor’s premium multi-application products. High water washout resistance means less re-greasing and maintenance.
Better extreme pressure protection.
• PRECISION greases stand up to the heavy loads and tough industrial conditions in paper machines, presses and mills. They’re also suited for the demands of highway, off-road and farm vehicles.
PRECISION SYNTHETIC
Synthetic EP00 Synthetic
Synthetic Heavy
Synthetic Moly
NLGI Grade /D217* 00 1 1.5 1
Colour /PCM 264*
Timken OK Load, kg/lb /D2509* 25/55 27/60 27/60 27/60
Four Ball Wear scar diam mm scar diam mm /D2266* 0.6 0.54 0.47 0.59
Water Washout % @ 79°C/174°F 8.8 6.7 6.5 4.7
Recommended Operating Temperature Range, °C Temperature Range, °F
-40 to 170-40 to 338
-40 to 170-40 to 338
-30 to 170-22 to 338
-40 to 170-40 to 338
* Test Method
Premium PRECISION Synthetic Greases.
PRECISION Synthetic combines premium performance with durability in different applications, and is specially formulated to provide protection over a wide range of operating temperatures.
PRECISION Synthetic also combines outstanding cold weather performance without compromising high temperature lubrication.
PRECISION Synthetic greases are recommended for use in all types of on-highway automotive equipment, as well as off-highway vehicles used in construction, farming, forestry and mining. In addition, they are well suited to lubricate industrial machinery, pulp and paper mills and mineral processing plants.
PRECISION Synthetic meets NLGI Automotive Service Classifi cation GC-LB for wheel bearing and chassis lubrication.
5
PRECISION* XL
0
20
40
60
80
100
120
PC PRECISION XL EP2’s long life under high temperature provides long-lasting equipment protection
Tim
e (H
our)
ASTM D3527 Bearing Life Performance Test at 160˚C (320˚F), 1000 rpm speed and 111 N thrust load
Competitive Premium
Multi-Application EP2
Competitive Premium
Multi-Application EP2
Competitive Reg.Multi-Application
EP2
Competitive Reg.Multi-Application
EP2
Competitive Premium
Multi-Application EP2
PC PRECISION
XL EP2
Passed NLGI GC-LB
Failed NLGI GC-LB
Excellent performance under challenging operating conditions.
PRECISION XL XL EP2 XL EP1 XL EP00 XL EP000 XL EMBXL Heavy
Duty
XL Rail Curve
Grease
NLGI Grade /D217* 2 1 00 000 2 2 1
Colour /PCM 264*
Timken OK Load, kg/lb /D2509* 27/60 27/60 18/40 18/40 NA 27/60 18/40
Four Ball Wear scar diam mm scar diam mm /D2266* 0.5 0.5 0.38 0.41 0.43 0.69 0.54
Water Washout % @ 79°C/174°F 3.8 8.5 NA NA NA 4.2 2.8
Recommended Operating Temperature Range, °C Temperature Range, °F
-20 to 160-4 to 320
-25 to 160-13 to 320
-35 to 100-31 to 212
-25 to 100-13 to 212
-25 to 160-13 to 320
-10 to 16014 to 320
-50 to 120-58 to 248
* Test Method
PRECISION* XL greases are versatile, premium performance, long-life, lithium-complex greases designed to lubricate and protect automotive and industrial equipment over a very wide range of operating conditions. They are perfectly designed for passenger cars, vans, highway truck fl eets and all off-highway vehicles. They are also recommended for all industrial machinery, as well as pulp and paper and steel mills.
PRECISION XL MOLYXL 3
Moly EP1XL 3
Moly EP2XL 3
Moly ArcticXL 5
Moly EP0XL 5
Moly EP1XL 5
Moly EP2
NLGI Grade /D217* 1 2 1 0 1 2
Colour /PCM 264*
Timken OK Load, kg/lb /D2509* 27/60 27/60 18/40 23/50 23/50 20/45
Four Ball Wear scar diam mm scar diam mm /D2266*
0.52 0.6 0.47 0.55 0.5 0.5
Water Washout % @ 79°C/174°F 5.0 2.5 9.0 NA 3.5 3.5
Recommended Operating Temperature Range, °C Temperature Range, °F
-25 to 135-13 to 275
-15 to 1355 to 275
-45 to 135-31 to 275
-50 to 120-58 to 248
-30 to 135-22 to 257
-25 to 135-13 to 257
* Test Method
PRECISION XL Moly greases are lithium greases best suited to tough, heavy duty shock-loaded equipment in industrial and off-highway applications. EP1 and EP2 grades contain medium viscosity oil, and are suitable for truck fi fth wheel application. XL 5 Moly greases are compounded with 5% molybdenum disulphide to meet Caterpillar lubricant specifi cations for its 3130 (7TJ and 5ZL), 5230 (7LL) model mining excavators and 944 (9YF) model wheel loaders.
PRECISION GENERAL PURPOSE
General Purpose EP1
General Purpose EP2
General Purpose Moly
EP2
NLGI Grade /D217* 1 2 2
Colour /PCM 264*
Timken OK Load, kg/lb /D2509* 18/40 18/40 18/40
Four Ball Wear scar diam mm scar diam mm /D2266*
0.58 0.59 0.56
Water Washout % @ 79°C/174°F 9.25 3.8 1.8
Recommended Operating Temperature Range, °C Temperature Range, °F
-30 to 135-22 to 275
-20 to 135-4 to 275
-30 to 135-22 to 275
* Test Method
Petro-Canada also has a line of PRECISION General Purpose greases that are good quality, cost-effective, lithium-based extreme pressure greases for wide operating temperature ranges and water resistance. This line is ideal for operations requiring a general multi-application grease.
Precision General Purpose Greases
PRECISION XL EP2 and EP1 meet NLGI Automotive Service Classifi cation GC-LB for wheel bearing and chassis lubrication.
PREC
ISIO
N XL
: WID
E TE
MPE
RATU
RE A
ND G
REAT
PRO
TECT
ION
7
PEERLESS*
PC PEERLESS OG Plus’ high resistance to water washout requires less re-greasing
% R
emai
ning
PC PEERLESS
OG Plus
CompetitivePremiumProduct
CompetitivePremiumProduct
CompetitivePremiumProduct
ASTM D1264 Determining the water washout at 79°C (174°F), 5.0 mL/sec. water flow rate and 600 rpm bearing speed
97.5
99.5
99
98.5
98
100
97
PEERLESS LLG* provides excellent service life under the most extreme temperatures. PEERLESS LLG is recommended for:
• Sealed-for-life bearings found on automotive and industrial equipment.
• Other life pack applications, such as constant velocity joints.
• Bearings and slide-ways operating continuously at temperatures up to 200°C/392°F.
PC PEERLESS LLG with the highest operating temperatureprovides extended service life for customers
Tem
pera
ture
(°C
)
PC PEERLESS
LLG
CompetitivePremiumProduct
CompetitivePremiumProduct
200
205
195
190
185
180
175
170
165
Premium protection under high temperatures.
PEERLESS OG line-up of greases is a true multi-application long life grease, formulated for the lubrication of loaded bearings, universal joints and chassis in industry, transport, marine and off-shore applications operating in very severe wet, dusty and/or dry conditions.
PEERLESS SVG 102 valve grease is specially formulated for the lubrication of the internal parts of valves employed in the production and distribution of sour gas in natural gas plants.
PEERLESS LLG OG0 OG1 OG2 OG2 Red OG Plus SVG 102 XCG Flex
NLGI Grade /D217* 2 0 1 2 2 2.5 1 1
Colour /PCM 264*
Timken OK Load, kg/lb /D2509* 27/60 23/50 27/60 27/60 27/60 27/60 27/60 30/65
Four Ball Wear scar diam mm scar diam mm /D2266*
0.45 0.42 0.38 0.52 0.42 0.54 0.51 0.41
Water Washout % @ 79°C/174°F 1.5 NA 2.75 2.24 2.75 0.5 1.5 1.5
Recommended Operating Temperature Range, °C Temperature Range, °F
-20 to 200-4 to 392
-35 to 163-31 to 325
-30 to 163-22 to 325
-25 to 163-13 to 325
-25 to 163-13 to 325
-20 to 163-4 to 325
-35 to 163-31 to 325
-20 to 163-4 to 325
* Test Method
PEERLESS XCG FLEX is an ideal choice for use in high-speed fl exible couplings, where severe centrifugal forces are generated.
PEERLESS LLG and OG2 meet NLGI Automotive Service Classifi cation GC-LB for wheel bearing and chassis lubrication.
PEER
LESS
: HIG
H TE
MPE
RATU
RE A
ND W
ET E
NVIR
ONM
ENT
9
PURIT Y* FG
20
40
60
80
100
Resistance to water spray lossASTM D4049
% R
emai
ning
aft
er W
ater
Spr
ay
PC PURITY FG
Specialty Food Grade Competitor
Leading World Wide Competitor
ASTM D4049 to determine the water spray loss at operating conditions of 38˚C (100˚F) and 124 kPa (18 psi)
0
Food grade performance without compromise.
86
88
90
92
94
96
98
100
Resistance to water washoutASTM D1264
% R
emai
ning
PC PURITY FG
Leading World WideCompetitor
Specialty Food GradeCompetitor
ASTM D1264 Determining the water washout at 79°C (174°F), 5.0 mL/sec. water flow rate and 600 rpm bearing speed
PURITY FG GREASES FG FG 00FG
SyntheticFG Extreme
FG Clear FM
NLGI Grade /D217* 2 00 2 2 2
Colour /PCM 264* White White White Clear
Timken OK Load, kg/lb /D2509* 16/35 16/35 27/60 23/50 9/20
Four Ball Wear scar diam mm scar diam mm /D2266* 0.55 0.56 0.51 0.58 0.49
Water Washout % @ 79°C/174°F 0.25 2.8 1.5 2.4 0.75
Recommended Operating Temperature Range, °C Temperature Range, °F
-20 to 160-4 to 320
-35 to 120-31 to 248
-40 to 200-40 to 392
-20 to 160-4 to 320
-20 to 160-4 to 320
* Test Method
PURITY* FG Food Grade greases are specially formulated to deliver exceptional performance demanded in tough food processing operation, anywhere in the plant. They maintain their consistency and lubrication even when subjected to food acids, juices, by-products and temperature swings.
In fact, PURITY FG greases resist water washout, water jet spray and most sterilizing chemicals used in cleaning better than most competitive greases. That means less re-greasing and downtime for your plant.
Whether it’s a heavy load, or a wide range of temperatures, PURITY FG will not run from bearings near ovens, remains pumpable at low temperatures and is ideal for heavily loaded bearings operating under wide temperature swings.
PURITY FG also delivers better wear protection which can mean fewer production disruptions, higher productivity and lower maintenance costs.
Meeting the highest standards.
PURITY FG products carry a complete set of food credentials including NSF H1, Canadian Food Inspection Agency, Kosher and Pareve, Halal, Allergen free and GMS free. They fi t perfectly into your HACCP or GMP plan. Petro-Canada’s food grade lubricants are designed to exceed the toughest performance expectations while delivering peace of mind.
• PURITY FG greases provide better resistance to water washout than most competitive products.
• PURITY FG greases resist water spray loss, meaning less re-greasing after cleaning.
PURI
TY FG
: FOO
D AN
D EN
VIRO
NMEN
T
11
VULTREX* OGLGear Lubricants
P&H Standard Rating
LeadingCompetitiveProduct
P&H #464 Open Gear
Lubrication Std.
P&H #520 Multi-Service
Lubrication Std.
4 8
PC VULTREX OGL Synthetic All Season
SpecialtyCompanyCompetitiveProduct
The results of four tests (Timken OK Load, Timken Retention, Four Ball Weld and Four Ball Wear) are compared against the P&H 464 and P&H 520 standard. For each test, 1 point is assigned if it meets the requirements of P&H 464, and 2 points if it meets P&H 520.
VULTREX OGL Synthetic All Season beats major competitors in head-to-head comparisons.
VULTREX* – A solvent-free formulation.
This next-generation gear lubricant is designed for use on large, heavy duty, open and enclosed gear drives, as well as bearings and exposed sliding surfaces. Just the kind of applications you’ll fi nd in open-pit mining operations, using large mining shovels, excavators and draglines.
These multi-service lubricants provide excellent wear protection and exceptional water spray-off resistance and meet or exceed major OEM requirements for open gear lubricants.
The VULTREX OGL line of greases are open gear lubricant greases designed with a darkening agent that allows mining operators to more easily identify that gears have adequate grease applied. VULTREX OGL Synthetic All Season, Synthetic 2200 and Heavy greases all meet the P&H 520 specifi cation for mining equipment, and are also on the Bucyrus International Certifi ed Lubricant Listing for the SD 4713 specifi cation.
Outstanding protection in the toughest mining applications.
VULTREX Synthetic All Season extends BI 395B shovel component life by an average of 25,000 hours†
Hoist Pinion & Bull Gear Component LifeActual (Forged Gears) 50,000 HrsTypical Programmed Replacement Life 30,000 Hrs
Difference 20,000 Hrs (67%)
Lower Roller Pin Component LifeActual 20,000 HrsTypical Programmed Replacement Life 15,000 Hrs
Difference 5,000 Hrs (33%)
Swing Gear Component LifeActual 100,000 HrsTypical Programmed Replacement Life 50,000 Hrs
Difference 50,000 Hrs (100%)
† In a Canadian customer location under oil sand mining conditions.
VULTREX OGL Synthetic All Season extended BI 395B shovel component life by an average of 25,000 hours†
† In a Canadian customer location under oil sand mining conditions.
VULTREX
OGLSynthetic
All Season
OGLSynthetic
Arctic
OGLSynthetic
2200OGL
HeavyEGF
1000
NLGI Grade /D217* 0/00 NA 0 0 000
Colour /PCM 264*
Base Fluid Viscosity,
cSt @ 40°C/D445*700 226 2200 3600 411
Timken OK Load,
kg/lb /D2509*25/55 23/50 25/55 25/55 23/50
Four Ball Wear scar
diam, mm /D2266*0.63 0.64 0.62 0.59 0.58
Four Ball Weld,
kg /D2596*500 400 800 800 400
Recommended Operating** Temperature Range, °C Temperature Range, °F
-40 to 40-40 to 104
-50 to 10-58 to 50
-25 to 5013 to 122
-15 to 1505 to 302
-30 to 100***
-22 to 212
* Test Method ** Based on pumpability test, but is dependent on the design and type of the dispensing systems, length and diameter of lines,
the mode of application and rate of pressurization*** Once the gear case is full, the grearing system can operate at temperatures as low as -40 °C/°F based on actual operation
VULT
REX
OGL:
MIN
ING
AND
MIL
L APP
LICA
TION
S
13
VULTREX*
Industrial Lubricants
5
10
15
20
25
30
35
40
45
ASTM D217 at 10,000 strokes, 25˚C (77˚F)
PC VULTREX MPG EP2 with the lowest break-down under low shear conditions provides extended service life for customers
Pene
trat
ion
chan
ge, 6
0 to
10
,000
str
okes
(m
m/1
0)
PC VULTREX MPG
EP2
CompetitivePremiumProduct
CompetitivePremiumProduct
CompetitivePremiumProduct
0
PC VULTREX MPG EP2’s high resistance to water washout requires less re-greasing
% o
f Res
ista
nce
94
96
98
92
100
PC VULTREX MPG
EP2
CompetitivePremiumProducts
CompetitivePremiumProducts
CompetitivePremiumProducts
CompetitivePremiumProducts
CompetitivePremiumProducts
ASTM D1264 Determining the water washout at 79°C (174°F), 5.0 mL/sec. water flow rate and 600 rpm bearing speed
90
VULTREX* – Because not all work is done under ideal conditions.
That’s where Petro-Canada’s VULTREX greases take over. VULTREX provides excellent lubrication performance for
off-road equipment – the tough jobs in construction, mining, forestry and heavy duty equipment.
VULTREX MPG, G-123 and G-124 greases are formulated to revert back to their original consistency after
over-heating and re-cooling, ideal for bearings subjected to high pressures or heavy shock loading.
The result is outstanding service life and equipment protection even under extreme operating conditions.
Other mining specialty greases.
Gear LubricantsDesigned for maximum gear protection.
• VULTREX Gear Dressing EP• VULTREX Gear Shield† P, NC
Drilling Compounds and GreasesDesigned for the lubrication and prevention of galling on drilling equipment.
• VULTREX Drill Rod Heavy Grease• VULTREX API Modifi ed Thread Compound • VULTREX Tool Joint Compound
Cam CompoundsDesigned for the lubrication of the walking cam mechanisms on Bucyrus International draglines.
• VULTREX Rolling Cam/Slide Cam Compounds
Specialty Rock/Drill GreasesDesigned for “mist-free” lubrication of rock drills and in-line pneumatic systems.
• VULTREX Rock Drill EP000
Exceptional protection in extreme operating conditions.
VULTREX
MPGSynthetic
ArcticMPGEP1
MPGEP2 G-123 G-124
NLGI Grade /D217* 0 1 2 1 2
Colour /PCM 264*
Base Fluid Viscosity, cSt @ 40 °C/D445* 137 460 460 220 220
Timken OK Load, kg/lb /D2509* 23/50 23/50 23/50 23/50 23/50
Four Ball Wear scar diam mm scar diam mm /D2266* 0.63 0.5 0.48 0.5 0.46
Four Ball Weld point, kg /D2596* 400 400 400 315 315
Recommended Operating Temperature Range, °C Temperature Range, °F
-45 to 120-49 to 248
-25 to 160-13 to 320
-20 to 160-4 to 320
-25 to 160-13 to 320
-20 to 160-4 to 320
* Test Method
VULTREXRock Drill
EP000RollingCam
Rolling Cam Light
SlideCam
Slide Cam Light
Gear Shield†
NC
Gear Shield†
P
GearDressing
EP
NLGI Grade /D217* 000 1 0 00 00 ** *** 1.5
Colour /PCM 264*
Timken OK Load, kg/lb /D2509* 40 50 50 50 55 40 45 45
Four Ball Wear scar diam mm scar diam mm /D2266* 0.43 0.43 0.75 0.68 0.84 0.40 0.42 0.53
Four Ball Weld point, kg /D2596* 200 800 800 800 620 400 400 315
Recommended Operating** Temperature Range, °C Temperature Range, °F
-30 to 100-22 to 212
-20 to >100-4 to >212
-35 to >100-31 to >212
-25 to >100-13 to >212
-35 to >100-31 to >212
-5 to 9323 to 200
-9 to 12115 to 250
20 to 8068 to 176
Minimum Dispensing Temperature, °C/ °F -30/-22 -15/+5 -30/-22 -20/-4 -30/-22 -5/23 -18/0 20/68
*Test Method †Gear Shield is a registered trademark of Petron Corp.; Petro-Canada is a registered user.**No NLGI grade specifi ed – typical pen is 395 (NLGI 0/00)***No NLGI grade specifi ed – typical pen is 447 (NLGI 000)
VULTREXAPI Modifi ed Thread
Compound Drill Rod Heavy Tool Joint Compound
NLGI Grade /D217* 1 3 2
Colour /PCM 264*
Base Fluid Viscosity 103.3 155.5 103.3
* Test MethodVU
LTRE
X M
PG: M
ININ
G/HE
AVY
INDU
STRY
/SPE
CIAL
TY A
PPLI
CATI
ONS
15
Petro-Canada Greases – meeting the needs of industry.
Petro-Canada is the largest Canadian grease manufacturer, researching and developing grease products for every condition and application.
Whether it’s the sub-Arctic conditions of a northern mine, or the plant floor where applications can be just as challenging, Petro-Canada has a product specifically formulated for your industry.
GC = Grease Colour W = White
GC General Manufacturing:Precision XL EP2: For premium service, wider
temperature range and general purpose plant use.
Precision XL EP1: For centralized automated lubrication systems.
Precision XL EP00:
Precision GP EP1:
Precision XL3 Moly EP2: For plant machinery requiring good EP and shock resistance.
Precision GP Moly EP2:
Precision XL EMB: For electric motor bearing application.
Precision XL EP000: For leaky gear cases and chains.
Precision GP EP2: For regular service, general purpose plant use.
Peerless OG: For applications where water or wet conditions prevail.
Peerless LLG: For elevated temperature application such as kilns, ovens, and high temp exhaust fan systems.
GC Food Industry:
WPurity FG Food Machinery Grease FG:
For general plant use. NSF H1 registered.
WPurity FG Food Machinery Grease 00:
For leaky, enclosed gear cases and auto lube systems. NSF H1 registered.
Purity FG Synthetic Food Machinery Grease:
For heavier loads, and wider temperature extremes. It can be used as an “All Plant” product/lubricant. NSF H1 registered.
Peerless OG: For non incidental contact applications. NSF H2.
Precision Synthetic: For conveyors/equipment for refrigeration systems.
Purity FG Synthetic:
WPurity FG Extreme, Purity FG Clear FM:
GC Fleet (Trucking), Construction Industry, Off-road:Precision XL EP1, EP2: For wheel bearing and chassis
lubrication.Precision Synthetic:
Peerless OG1, OG2 (NLGI GC/LB):
Precision XL3 Moly, Precision Synthetic Moly, Precision GP Moly EP2:
For General Purpose, shock loading applications, heavy duty trucking chassis, bushings, kingpins, etc.
Precision XL5 Moly EP0, EP1, EP2:
Meets Caterpillar specifications for Excavators and Wheel Loaders requiring 5% Moly.
Precision XL EP00: For centralized “on-board” chassis lubrication systems on trucks and mobile equipment.
Precision XL3 Moly EP1, Precision XL3 Moly EP2:
For fifth wheel applications.
Peerless OG2:
Precision Synthetic EP00:
For trailer end hub axle bearings.
Precision GP EP1, EP2: For wheel bearing and chassis lubrication.
Vultrex G-123, G-124: For fleet applications requiring a red grease.
GC Forestry:Precision Synthetic: For wider temperature range
applications.Precision Synthetic Moly:
Precision XL3 Moly EP1, EP2:
Vultrex G-123, G-124: For good water resistance applications and trucking.
Precision XL3 Moly Arctic:
For the all-season lubrication of joints on tree harvesting equipment.
Precision XL EP: For wheel bearings and chassis on-board truck lubers.
Precision XL3 Moly EP2: For fifth wheel on trucks.
Precision GP Moly EP2: For general purpose lubrication in off-highway equipment.
GC Sawmills:Precision GP EP: For general purpose
applications.
Precision XL EP: For wider temperature range, general purpose applications.
Precision Synthetic: For multi-season, multi-service applications.
Peerless LLG: For kiln exhaust fan bearings.
GC Paper Mills:Peerless OG: For very wet or damp conditions
(mills) and Vultrex for paper machine central systems.
Precision Synthetic Heavy:
For heavy duty applications at higher temperatures, (dry felt roller bearings).
Precision XL EP: For general purpose applications.
Precision XL EMB: For electric motor bearings.
“”
GC Steel Industry:Precision XL Heavy Duty: For the lubrication of steel
rolling mill bearings using a centralized lubrication system.
Vultrex MPG EP2: For wider temperature range applications in the lubrication of steel rolling mill bearings.
GC Offshore/Marine:Peerless OG2: For premium service and
general purpose use, for lubrication on deck, wire ropes, or any application that is exposed to moisture and sea water.
Precision XL EP2: For premium service and general purpose use.
Precision XL EP1, Precision XL EP00:
For centralized automated lubrication systems.
Precision GP EP1,Precision GP EP2:
For regular service, general purpose use.
GC Mining Industry– Mobile Equipment:Precision XL EP: For multi-purpose service, wider
temperature range applications.Precision Synthetic:
Precision XL EP00: For centralized lubrication systems on mobile equipment.
Precision XL3 Moly Arctic, Precision XL3 Moly, Precision Synthetic Moly,Precision GP Moly EP2:
For general purpose, shock loading applications, heavy duty truck chassis, bushings, kingpins, etc.
Precision XL5 Moly EP0, EP1, EP2:
To meet Caterpillar spec of 5% moly.
Precision GP EP: For general purpose lubrication.
Vultrex Rolling Cam: For the lubrication of the walking cam mechanisms on Bucyrus International draglines.Vultrex Slide Cam:
Vultrex OGL Synthetic All Season, OGL Synthetic Arctic, Synthetic 2200, and Heavy:
For heavy duty lubrication of open gears on-board mining shovels and draglines, bearings and other sliding/rolling surfaces found on open pit mining equipment.
Vultrex EGF 1000: For the lubrication of enclosed gears in the drive mechanism of mining equipment.
Vultrex MPG Synthetic Arctic, EP1:
For heavy duty bearing lubrication and centralized lubrication system on shovels, draglines and haul trucks at lower temperatures.
Vultrex MPG EP2: For heavy duty bearing lubrication of shovels, draglines and haul trucks at higher temperatures.
Precision XL EP000: For the lubrication of gear cases of continuous miners.
GC Mining Industry– Drilling:Vultrex API Modifi ed Thread compound:
For the lubrication and prevention of galling on casing, tubing, and line pipe threads.
Vultrex Tool Joint compound:
For the lubrication and prevention of galling of pipe joints and collars.
Vultrex Drill Rod Heavy Grease:
For the lubrication of diamond drill rods.
Vultrex Rock Drill EP000:
For the “mist-free” lubrication of rock drills and in-line pneumatic systems.
GC Mining Industry– Mill / Stationary Equipment:Precision XL EP: For multi-service, wider
temperature range applications.
Precision Synthetic: For all-season (outdoor) applications.
Precision XL EMB: For electric motor bearings.
Precision GP EP: For general purpose lubrication.
Vultrex Gear Shield† NC: For lubrication of Mill open gear sets, SAG and Ball Mills.
Vultrex Gear Shield† P: Synthetic, for lubrication of Mill open gear sets.
Vultrex EGF 1000: Open gears of tumblers and enclosed gear lubrication.
Vultrex Gear Dressing EP:
For slow moving gears and chains, clutch mechanism on hoists, head frame.
Precision XL3 Moly EP1, EP2:
For the lubrication of mining, quarrying equipment (jaw crushers).
†Gear Shield is a registered trademark of Petron Corp.; Petro-Canada is a registered user.
GC Plastics Manufacturing:Precision XL EP2: For premium service, wider
temperature range.
Peerless OG2: For slide-ways on extruders and molding units.
Peerless LLG:
Precision XL EMB: For electric motor bearings.
Precision GP EP2: For regular service, general purpose plant use.
GC Auto Parts Manufacturing:Precision XL EP2: For premium service, wider
temperature range.
Precision XL EP2: For lubrication of bearings on robot turrets.
Peerless OG:
Peerless OG2: For lubrication of bearings in milling, grinding, machining areas using coolants.Peerless LLG:
Precision XL EMB: For electric motor bearings.
Precision GP EP2: For regular service, general purpose plant use.
By choosing a Purity food grade grease, Vitto Brand Foods is using a grease that works, is better than the competitive product, and is completely safe for contact with food. “It’s the only solution that makes sense for us.”
JERRY GILBANKMAINTENANCE MANAGER
VITTO BRAND FOODS
INDU
STRY
APP
LICA
TION
S
17
Petro-Canada’s commitment to quality and the environment.Now more than ever, integrity is the foundation on which trust and success are built. For more than 20 years, we’ve abided by a strict code of conduct and built a reputation as a responsible and ethical corporate citizen. We understand that operating a business means doing more than simply meeting legal and regulatory requirements. We must balance economic growth with environmental stewardship and local community support.
“”With Peerless OG greases, there is more resistance to corrosion and the water resistance is the best. That helps the machinery stay in good condition and last longer which is very important in my business. When my sons eventually take over the business, they will also use Petro-Canada’s Peerless OG products.
JEAN-GUY ROBICHAUD
OWNER AND FOREMAN,
JEAN-GUY ROBICHAUD ET FILS INC.
“”In our area of the rainforest, we deal with wide temperature ranges and a lot of rain – about 18 feet each year ... because of these weather conditions, we have to be especially meticulous about the protection of the tram’s bearings. Rain can destroy bearings that aren’t protected with the proper grease, and if a bearing breaks it has to be replaced, which is quite expensive. With Peerless OG2, we save money because of less maintenance time and labour required. We’re very happy with the results we experience with Petro-Canada’s Peerless OG2.
DANIEL TORRES
OPERATIONS MANAGER
RAIN FOREST AERIAL TRAM ATLANTIC
What customers are saying:
“”Usually, after a few months, the equipment was just not running its best, but since switching to PRECISION XL EP2, the equipment is running really smoothly all the time. The machine parts are not as slack as they used to be and they’re not wearing down as often. My maintenance costs have gone down by about 20% because of the switch to PRECISION XL EP2.
STEVE RACCO
GENERAL MANAGER,
RACCO IRON AND METALS
“”PRECISION SYNTHETIC is the best because it retains its fl uidity within the wide temperature range of the trip, and works well in hot and cold temperatures. One year and 1,000,000 kilometres later, the bearings were all right. I cleaned them, put on new seals, lubricated them with new grease and used the same bearings. I didn’t need to change them. They were just like new.
CLAUDE LAPORTE
DIRECTOR OF RESEARCH AND DEVELOPMENT
DANFREIGHT SYSTEMS INC.
For more information, visit www.petro-canada.com
Pr
inte
d i
n C
an
ad
a
Pr
inte
d o
n r
eC
yC
led
Pa
Pe
r L
UB
20
06
E (0
6.1
0)
* Marque de commerce de Petro-Canada - Trademark
Minimize downtime. Maximize uptime.Petro-Canada’s No-nonsense Warranty: “Petro-Canada will repair damaged equipment,
or replace damaged equipment parts resulting from a failure due to defects of the Petro-Canada lubricant, as long as the lubricant is used in accordance with
your equipment manufacturer’s and our recommendations.”
our business is keepingyour business going.
If you would like to know more about Petro-Canada’s line of high quality greases please contact us at:
Head Office: Petro-Canada Lubricants 2310 Lakeshore Road West Mississauga, Ontario Canada L5J 1K2
Canada – West .................................... Phone 1-800-661-1199 – East (English) ...................... Phone 1-800-268-5850 (French) ...................... Phone 1-800-576-1686United States ........................................... Phone 1-888-284-4572 Europe ..................................................... Phone +44 (0) 2476-247294 Other Areas ............................................. Phone (416) 730-2408 E-mail ....................................................... [email protected] Internet ................................................... www.petro-canada.com
Petro-Canada America Lubricants Petro-Canada Europe Lubricants 980 North Michigan Avenue The Manor, Haseley Business Centre Suite 1400, #1431 Warwick, Warwickshire Chicago, Illinois CV35 7LS USA 60611 United Kingdom
CERTIFIED
Authorized Lubricants Distributor: