ADVANCED EMERGENCY MEDICAL TECHNICIAN• Automotive heating, ventilation, and air conditioning •...
Transcript of ADVANCED EMERGENCY MEDICAL TECHNICIAN• Automotive heating, ventilation, and air conditioning •...
ADVANCED EMERGENCY MEDICAL TECHNICIAN
davistech.edu/advanced-emergency-medical-technician
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $783* (pay as you go)• Books/Materials: $510
• High School Students• Estimated Total Cost: $367
• Licensure Cost: $223• Financial Aid Available: Scholarships, GI Bill• Schedule: See davistech.edu/programs for dates and
times• Length of Training: 4 months (148 hours)• Accredited: Council on Occupational Education,
Utah Department of Health – Bureau of Emergency Medical Services (BEMS)
• Utah Average Annual Job Openings: 240
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Advanced Emergency Medical Technician (4 months)
CREDENTIALS AVAILABLE• Davis Technical College Certificate of
Program Completion – Advanced Emergency Medical Technician
• National Registry of Emergency Medical Technicians - AEMT Certification
TRANSFER OPTIONSTransfer credits toward an Associate of Applied Science degree at the following:• Weber State University
EMPLOYER RELATIONSHIPS • Bureau of Emergency Medical Services • Clinton City Fire Department• Davis County Sheriff’s Office• Davis Hospital Medical Center• Farmington Fire Department• Kaysville Fire Department• Layton City Fire Department• North Davis Fire Department• Riverdale Fire Department• South Davis Metro Fire Agency• Syracuse Fire Department• Weber Fire District
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
adva
nced
-eme
rgen
cy-m
edica
l-tec
hnici
an |
801
.593.2
500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
ADVANCED EMERGENCY MEDICAL TECHNICIAN
ARCHITECTURAL ANDENGINEERING DESIGN
More program information on reverse >
Renderings by Jordan Dunn, Davis Technical College
Student.WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,319* (pay as you go)• Books/Materials: $1,644
• High School Students• Estimated Total Cost: $40/year
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 220• Placement Rate: 100%
davistech.edu/architectural-and-engineering-design
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Computer aided drafting with AutoCAD and blueprint reading• Architectural, residential, and commercial drafting and detailing• 3D parametric solid modeling with SolidWorks• Portfolio development• Modeling and drafting composites• Machine design and production drafting (GD&T)• Design thinking in response to real-world problems• Collaborative attitude with critique and iteration• Modeling making, hand-sketching, and 3D printing• Research, problem solving skills, and the iterative process• Analogue and digital visual communication skills• Sustainability, accessibility, historical preservation, health,
and social justice
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion - Architectural and Engineering Design• Autodesk Revit• Autodesk AutoCAD• Certified SolidWorks Associate (CSWA)
TRANSFER OPTIONSTransfer credits toward an Associate of Applied Science degree at the following:
• Dixie State University• Ensign College• Utah State University• Utah Valley University• Southern Utah State University• Salt Lake Community College• Weber State University
EMPLOYER RELATIONSHIPS• Borsight • Chevron• Gerhart Cole• Grace Company• Hill Air Force Base• Method Studio• Rocky Mountain Rebar• Ore Design • PPM/Precision Property
Measurements • Maverik• VCBO Architecture• WesTech Engineering
ARCHITECTURAL ANDENGINEERING DESIGN
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
arch
itect
ural
-and
-eng
ineer
ing-d
esign
| 8
01.59
3.250
0
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,382* • Books/Materials: $715
• High School Students• Estimated Total Cost: $60
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 4:30-9 pm• Enrollment: Start anytime• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 400• Placement Rate: 98%
AUTOMATION ANDROBOTICS
davistech.edu/automation-and-robotics
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Industrial controls• Mechanical and fluid power• Industrial networking • Unmanned Aerial Vehicle (UAV)/
drone technology• HVAC/refrigeration• Electronics assembly and
soldering• Programmable Logic Controllers
(PLCs)
• Renewable energy• Electrical equipment basics• Building automation• Electrical motor controls• Industrial robotics• Human machine interface• Microcontroller/microprocessor
programming• Industrial vision systems
EQUIPMENT• Automated manufacturing lines• Variable frequency drives• Instrumentation process control
equipment• Belt and chain drives• Bearing lubrication and
installation• Opto-22 Programmable
Automation Controllers• Shaft alignment and pump
installation • ABB robotics
• Hydraulic and pneumatic equipment
• Fanuc robotics• Electrical motor controls• Solar/wind renewable energy• Allen Bradley, GE, Schneider
Electric and Siemens Programmable Logic Controllers
• FANUC iRVision Systems• Cognex Vision Systems
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion - Automation and Robotics ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Airgas USA, LLC• Albertsons Distribution• Autliv• Amazon• BD Medical• Compass Minerals• Davis School District• Dematic• FedEx• Futura Industies• G-Build Green Home Building• Great Salt Lake Minerals• Hill Air Force Base
• HollyFrontier Refining Co.• Hunt Electric• Inline Plastics• Intermon Wind and Solar• Lagoon• Lifetime Products• Kroger Dairy• Kroger Bakery• North Davis Sewer District• EMS Solutions• Resource Manufacturing Co. • Stadler Rail• T.D. Williamson
8/20
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
auto
matio
n-an
d-ro
botic
s | 8
01.59
3.250
0 AUTOMATIONAND ROBOTICS
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $3,323* • Books/Materials: $181
• High School Students• Estimated Total Cost: $45
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 13 months (1200 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 1020• Placement Rate: 93%
AUTOMOTIVE TECHNOLOGY
davistech.edu/automotive-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Safety and shop equipment• Maintenance and light repair• Engine repair• Automatic transmission and
transaxles• Manual drive train and axles• Steering and suspension• Electrical/electronic systems
• Automotive heating, ventilation, and air conditioning
• Engine performance• Light vehicle diesel engines• EPA section 609 technician
certification• Utah vehicle safety
inspection
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion
• Mobile Air Conditioning Society Section 609• ASE Automobile and Light Truck Certificates:
- A1 Engine Repair- A2 Automatic Transmission/ Transaxle- A3 Manual Drive Train & Axles- A4 Suspension & Steering
- A5 Brakes- A6 Electrical/Electronic Systems- A7 Heating and Air Conditioning- A8 Engine Performance
ACADEMIC AGREEMENTS Transfer credits toward an Associate of Applied Science degree at the following:
• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• AutoZone• Discount Tires• Ed Kenley Ford• Extreme Auto Service• Fat Bob’s Garage• Felt Auto Parts and Machine Shop• Hyundai Motor Company• Larry H. Miller• Mike Hale Acura• Murdock Auto Team• Snap-on Tools• Strong Volkswagen• Young Automotive Group
8/20
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
auto
motiv
e-te
chno
logy
| 8
01.59
3.250
0 AUTOMOTIVETECHNOLOGY
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,471* (pay as you go)
• Books/Materials: $462• High School Students
• Estimated Total Cost: $60• Schedule: M-F 8-11am and 12-3pm• Enrollment: Open enrollment, year round• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 2,030
BUILDINGCONSTRUCTIONTECHNOLOGY
davistech.edu/building-construction-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Basic electrical• Basic HVAC• Basic plumbing• Blueprint reading• Concrete/masonry• Cost estimating• Framing/carpentry• Job site safety• Tool safety• Computer aided drafting and AutoCAD• Architectural and residential architectural drafting• Architectural 3D modeling and Revit• Blueprint reading
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Building Construction Technology
• OSHA 10 (available as an online course for an additional fee)
• OSHA 30ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at: • Weber State University
EMPLOYER RELATIONSHIPS• Hughes Construction• Peterson Builders• US Development, Inc.• Strategic Builders• Henry Walker Homes
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
build
ing-c
onst
ruct
ion-te
chno
logy
| 8
01.59
3.250
0 BUILDING CONSTRUCTIONTECHNOLOGY
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,384* (pay as you go)• Books/Materials: $481
• High School Students• Estimated Total Cost: $68
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 3,880• Placement Rate: 92%
BUSINESS ADMINISTRATIVESERVICES
davistech.edu/business-administrative-services
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Keyboarding and ten-key• Operating systems, email, word processing,
spreadsheets, presentations, and database applications
• Customer service• Business writing and communication• Accounting• QuickBooks• Payroll• Personal finance
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion - Business Administrative Services• Microsoft Office Specialist Outlook 2016• Microsoft Office Specialist Word 2016• Microsoft Office Specialist Excel 2016• Microsoft Office Specialist PowerPoint 2016• Microsoft Office Specialist Access 2016• Microsoft Office Expert Word 2016• Microsoft Office Expert Excel 2016• Intuit QuickBooks Certified User
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Citigroup• Davis Chamber of
Commerce• Elwood Staffing Services• Gold Plating Services• H&R Block• Home Depot• Ignite Spot Outsourced
Accounting
• Peregrine Accounting and Consulting
• US Bank• Time Share Ware• Wells Fargo
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
busin
ess-
admi
nistra
tive-
serv
ices
| 80
1.593
.2500
BUSINESS ADMINISTRATIVE SERVICES
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,011* • Books/Materials: $343
• High School Students• Estimated Total Cost: $189
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 4:30-9 pm
• Enrollment: Open enrollment, year round• Length of Training: 8 months (735 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 500• Placement Rate: 97%
CNCMACHINING
davistech.edu/cnc-machining
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
More information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Blueprint reading• Surface plate
inspection techniques• Lathe operations• Geometric
dimensioning and tolerancing
• Vertical mill operations• CNC operations• CNC programming• CAD/CAM• 3D parametric
modeling
EQUIPMENT • Manual Knee Mills• Manual Lathes• CNC Mills and Lathes• CAD/CAM Workstations CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – CNC MachiningACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:
• Weber State University
EMPLOYER RELATIONSHIPS• Albany• BD Medical• Boeing• Cornerstone Machine• Dynamic Balance• Hartwig• Innovative
Precision LLC.• Janicki Industries, Inc.• LeanWerks• Newport Tool• Orbit Irrigation
Products, Inc.• Quality Machine and
Automation• Skydandee
Manufacturing• Smith Machinery
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
cnc-
mach
ining
| 8
01.59
3.250
0 CNCMACHINING
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?
• Adult Students• College Admission Fee: $45• Total Tuition and Fees: $2,434* • Books/Materials: $723
• High School Students• Estimated Total Cost: $100
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Start anytime• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 100• Placement Rate: 86%
COMPOSITEMATERIALSTECHNOLOGY
davistech.edu/composite-materials-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Hand lay up• Mold preparation and
tooling• Non-vacuum and vacuum
bag fabrication• Prepreg material
laminations• Composite repair• Resin Infusion
• Part finish• Core materials• Blueprint reading• Composites machining• Autoclave operation• Filament Winding• Introduction to Computer
Aided Design (CAD)
EQUIPMENT AND FACILITIES• Taricco autoclave• Flowjet water jet cutter• Gerber cutting table• McClean Anderson
filament winder• 3D printer• Walk-in industrial
freezers• Industrial ovens• Sanding and finishing
room• Paint spray booths
• Debulk tables• Two classrooms/computer
labs• STM-100KN United
compression/tensile testing
• Radius Engineering resin injection system
• Rolling Table• Snowboard Press
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Composite Materials Technology• American Composites Manufacturers Association
(ACMA) Certified Composites Technician
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS • Albany Engineered
Composites• Boeing• Composites One• Eclipse Composites
Engineering• ENVE Composites• Hexcel• Hill Air Force Base• General Atomics• Janicki Industries, Inc.• Kihomac• Nammo Composite
Solutions
• Northrop Grumman Innovation Systems
• SpaceX• Lockheed Martin• Advanced Composites• Rockwest Composites• Fillauer• Stadler Rail• Freedom Innovations• Bean Trailer/Sterling ATM• WCI
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
comp
osite
-mat
erial
s-te
chno
logy
| 8
01.59
3.250
0 COMPOSITEMATERIALSTECHNOLOGY
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $4,428* • Books/Materials: $3,050
• High School Students• Estimated Total Cost: $3,304
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: See davistech.edu/cosmetology for dates and times
• Enrollment: Seven training start dates per year• Length of Training: 17 months (1600 hours)• Accredited: Council on Occupational Education• Approved: Utah Division of Occupational and
Professional Licensing• Utah Average Annual Job Openings: 880• Placement Rate: 96%
COSMETOLOGY
davistech.edu/cosmetology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Beginning to advanced
haircutting• Beginning to advanced
hair coloring• Beginning to advanced
hair styling• Beginning to advanced
makeup• Chemical texturing• Sanitation and safety• Anatomy and physiology
• Chemistry and electricity• Nail technology• Basic esthetics• Hair design• Scalp care• Hair braiding• Social media marketing• Salon business• Eyelash extensions
(elective course)• Hattori Hanzo Shears
FACILITIES• Full-service salon and spa: - 54 hair stations - retail store - 13 esthetics tables - 20 nail stations - 4 + private spa roomsStudents are required to bring in models for services. The materials cost must be paid by the model or student.
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Cosmetology• Utah Division of Occupational and Professional
Licensing: Cosmetologist/Barber (must have social security number to license in Utah)
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:
• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Borboleta• Butterfly Jac• Creative Nail Design• Dollar Cuts• Embellish Salon• Eminence Organic Skincare
• Glymed• Great Clips• Jane Iredale • KIN• Salon 801• Salon Bleu• YG Laboratories
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
cosm
etol
ogy
| 80
1.593
.2500
COSMETOLOGY
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $3,311* • Books/Materials: $529
• High School Students• Estimated Total Cost: $276
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8 am-3 pm• Enrollment: Open enrollment, year round• Length of Training: 12 months (1,080 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 1,630• Placement Rate: 96%
CULINARY ARTS
davistech.edu/culinary-arts
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Food safety and
sanitation• Knife skills• Culinary fundamentals• Sauces and soups• Vegetables and starch
cookery
• Garde Manger• Baking and pastry
fundamentals• Meat and fish
fabrication• Fast casual cooking• Catering
Team up with fellow students to create gourmet meals for exciting campus events
EQUIPMENT AND FACILITIES• Commercial kitchen and
classroom space• Professional Hobart
mixers• Stack oven• Combi oven• Immersion circulator• Blast chiller
• Steam kettles• Tilt skillet• Dough sheeter• Buffalo chopper• Vacuum packing
machine• Slicers
Work with Professional Chefs while learning the fundamentals of the Culinary Arts profession using the tools of the trade
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Culinary Arts• ServSafe Food Production ManagerVisit local farms, restaurants, resorts, and food operations while learning the craft of the professional kitchen
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Salt Lake Community College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Intermountain
Healthcare• Grand America Hotel• Little America Hotel• Marriott Hotel• McKay-Dee Hospital• Nicholas and Company
• Oakridge Country Club• Snowbasin Resort• St. Regis, Deer Valley• Twiggs Bistro and Martini
Bar
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
culin
ary-
arts
| 8
01.59
3.250
0
CULINARY ARTS
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,994* (pay as you go)• Books/Materials: $1,792
• High School Students• Estimated Total Cost: $1,315
• Financial Aid Available: Pell Grants, Scholarships, GI Bill• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 12 months (1080 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 250• Placement Rate: 86%
CYBERSECURITY
davistech.edu/cybersecurity
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• General information
technology• Windows, Linux, and Mac Operating Systems• Android and iOS configuration• Patch and update management• Building and maintaining PC/
server hardware• Cloud computing• Virus and malware removal• HTML5, CSS3• Webserver installation and
management• Python and PowerShell• IT project management• TCP/IP networking (IPv4
and IPv6)• Firewalls and VPNs• Wireless network installation and
management• System and network
troubleshooting• System and network
management• White hat ethical hacking• Enterprise security• Computer forensics• Pen testing/vulnerability
assessment• Security policy/security
compliance• Information assurance• Ethernet LANs/VLANs• Multi-layer switch configuration• Cisco iOS and enterprise routing• VMware/virtualization
CREDENTIALS AVAILABLE• Davis Technical College
Certificate of Program Completion - Cybersecurity
• Cisco CCNA Routing and Switching• CISCO CCNA Security• CompTIA A+ Essentials • CompTIA A+ Practical Application• CompTIA Project+• Linux Essentials• CompTIA Network+• CompTIA Security+• CompTIA IT Fundamentals+
• Microsoft Technology Associate (MTA) Networking Fundamentals
• Microsoft Technology Associate (MTA) Security Fundamentals
• Microsoft Technology Associate (MTA) Administration Fundamentals
• AWS Cloud Practitioner• CompTIA Cloud Essentials• MTA Microsoft Server
Administration Fundamentals
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Sciencedegree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University• Western Governors
EMPLOYER RELATIONSHIPS• BAE• CenturyLink• Davis School District• Executech• TEK Systems• Unisys Corporation• Robert Half Technology
• DISA• NexOne
CYBERSECURITYDA
VIS T
ECHN
ICAL
COLL
EGE
| 55
0 Eas
t 300
Sout
h, K
aysv
ille,
UT 84
037
| da
viste
ch.ed
u/cy
bers
ecur
ity |
801
.593.2
500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,930* (pay as you go)• Books/Materials: $513
• High School Students• Estimated Total Cost: $293
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm• Enrollment: Open enrollment, year round• Length of Training: 11 months (1,005 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 810• Placement Rate: 93%
DENTAL ASSISTANT
davistech.edu/dental-assistant
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Dental terminology• Dental front office management• Dental office procedures and coding• Dental clinical laboratory procedures• Chairside assisting including four-handed dentistry• Dental specialties• Dental materials• Dental radiology• Externship experience of 300 hours in dental offices
EQUIPMENT AND FACILITIES • Ten fully equipped dental
operatories• Autoclaves• Cone-beam (3-D) digital
panoramic x-ray machine• Intraoral x-ray machines• Digital x-ray sensors• Dental laboratory
equipment
• Instrument and tray set-ups
• Dental laboratory equipment
• Electronic dental management systems
CREDENTIALS AVAILABLE• Davis Technical College Certificate of
Program Completion – Dental Assisting• Utah Division of Occupational and Professional Licensing
R156-69-604 Radiology Certification
ACADEMIC AGREEMENTS Transfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Utah State University• Southern Utah University• Weber State University
EMPLOYER RELATIONSHIPS • Dr. Grant Brough, DDS• Dr. Reve Chaston, DDS• Fairfield Dental• Layton Smiles
• Legacy Pediatric Dentistry• Monarch Dental• Oakridge Dental• 4 Dental Health
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
dent
al-a
ssist
ant
| 80
1.593
.2500
DENTALASSISTANT
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,810* • Books/Materials: $390
• High School Students• Estimated Total Cost: $95
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 420• Placement Rate: 100%
DIESEL/HEAVYDUTY TECHNOLOGY
davistech.edu/diesel-heavy-duty-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Introduction to diesel/heavy duty technology• Heavy-duty brakes• Preventative maintenance inspection• Electricity and electronics• Drive train• Diesel engines• Suspension and steering• Heavy-duty ventilation and air conditioning• Hydraulics• Truck diagnostics
EQUIPMENT AND FACILITIES • Fully-equipped diesel
shop including welding station, maintenance pit, and overhead crane
• Freightliner 2014• Freightliner 2009• Mack 2013• GMC 2004• Ford F-350 Power
Stroke 1999
• Volvo 2001, 2004• Volvo Day Cabs 2006• Wabash 53 Ft. Trailer 2008• Standalone engines,
transmissions, differentials, and boards
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Diesel/Heavy Duty Technology• EPA 609 Certification• Mobile Air Conditioning Society Section 609
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Salt Lake Community College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Albertsons• Crete Carriers• C.R. England - Global
Transportation• Carrier Transicold of Utah• Crown Equipment• Cummins Rocky Mountain• FedEx• Firestone Complete Auto
Service• Geneva Rock• Hill Air Force Base
• Prime, Inc.• Penske• Peterbuilt of Utah• Ralph Smith Company• Swift Transportation• Thermo-King Company• Utah Transit Authority• Wanship Transportation• Hughes General
Contractors• Weber State University
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
diese
l-hea
vy-d
uty-
tech
nolo
gy |
801
.593.2
500
DIESEL/HEAVYDUTY TECHNOLOGY
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,472* (pay as you go)• Books/Materials: $1,097
• High School Students• Estimated Total Cost: $90.00
• Licensure Cost: $164.00• Financial Aid Available: Scholarships• Schedule: M-F 8-11 am and 12 -3 pm• Enrollment: Program starts in August and
January each year• Length of Training: 720 hours (48 months while
working full-time in the field)• Utah Average Annual Job Openings: 1,310• Placement Rate: 98%
ELECTRICIANAPPRENTICE
davistech.edu/electrician-apprentice
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
REQUIREMENTSStudents (adult) must be employed in a related field and licensed by the Division of Occupational and Professional Licensing prior to enrolling in Electrical 1B.
SKILLS AND CONCEPTS TAUGHTThe Electrician Apprentice program prepares students for the journeyman qualifying examination by teaching them the following:• Electrical fundamentals and theory• National Electrical Code (NEC) residential and
commercial requirements• Construction and electrical safety• Residential and commercial electrical blueprint
reading• Single and three-phase AC power systems• Grounding, bonding, and motor calculations• Function of DC and AC motors and generators• Basic and complex electrical motor control systems• Skills for becoming crew leader and managing
electrical hazards
EQUIPMENT AND FACILITIES• Residential and commercial wiring labs• Motor control lab
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Electrician Apprentice• Eligible to take the Utah State Journeyman Electrician
License Test upon completion of coursework and OJT requirements
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at:• Weber State University (or AAS in Apprenticeship
(Electrician)• Salt Lake Community College (or AAS in Apprenticeship
(Electrical Independent Technology)
EMPLOYER RELATIONSHIPS• BDB Electric• G & L Electric
Services, Inc.• GSL Electric• Hawk Electric, Inc.
• Lynn Woodward Electric• Platt Electric Supply• Scott Willey Electric• Shupe Electric• Simplure, LLC
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
elec
tricia
n-ap
pren
tice
| 80
1.593
.2500
ELECTRICIANAPPRENTICE
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $773* • Books/Materials: $339
• High School Students• Estimated Total Cost: $424
• Licensure Cost: $188• Financial Aid Available: Scholarships, GI Bill• Schedule: See davistech.edu/programs for dates
and times• Length of Training: 3 months (136 hours)• Accredited: Council on Occupational Education,
Utah Department of Health – Bureau of Emergency Medical Services
• Utah Average Annual Job Openings: 240
EMERGENCY MEDICAL TECHNICIAN
davistech.edu/emergency-medical-technician
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Emergency Medical Technician (3 months)
CREDENTIALS AVAILABLE• Davis Technical College Certificate of
Program Completion – Emergency Medical Technician
• National Registry of Emergency Medical Technicians - EMT Certification
ACADEMIC AGREEMENTS Transfer credits toward an Associate of Applied Science degree at the following:
• Weber State University
EMPLOYER RELATIONSHIPS • Bureau of Emergency Medical Services • Clinton City Fire Department• Davis County Sheriff’s Office• Davis Hospital Medical Center• Farmington Fire Department• Kaysville Fire Department• Layton City Fire Department• North Davis Fire Department• Riverdale Fire Department• South Davis Metro Fire Agency• Syracuse Fire Department• Weber Fire District
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
emer
genc
y-me
dical
-tech
nician
| 8
01.59
3.250
0
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
EMERGENCY MEDICAL TECHNICIAN
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,295* • Books/Materials: $1,242
• High School Students• Estimated Total Cost: $2,132
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: See davistech.edu/esthetician for dates and times
• Enrollment: Seven training start dates per year• Length of Training: 9-12 Months (600 hours)• Accredited: Council on Occupational Education• Approved: Utah Division of Occupational and
Professional Licensing• Placement Rate: 89%
ESTHETICIAN
davistech.edu/esthetician
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Structure and composition of skin• Maintenance of healthy skin• Basic skin care procedures including: - Facials - Facial massage - Basic hair removal - Basic chemical peels - Basic makeup application - Pedicures – natural nails - Manicures – natural nails - Gel polish - Body treatments - Eyelash extensions (elective course)
Students are required to bring in models for services. The materials cost must be paid by the model or student.
EQUIPMENT• High frequency/iontophoresis
machine/desincrustation• Facial steamers• Fergulator• Lucas sprayer• Galvanic machine
CREDENTIALS• Davis Technical College Certificate of Program
Completion - Esthetician• Utah Division of Occupational and Professional
Licensing - Esthetician (must have social security number to license in Utah)
EMPLOYER RELATIONSHIPS• Benefit Cosmetics• Beyond Spa• Borboleta• Eminence Organic
Skincare• Glymed• Grand America• Image Skin Care• Jane Iredale • Main Attractions Day Spa• M’Lis • New Image Day Spa• Ogden Clinic
• Phazes Salon and Spa• Platinum Image Salon and
Day Spa• Profiles Salon and Day Spa• Pureza Spa• Salon & Spa Fifth Avenue• True Beauty Forever• Ulta Farmington Station• Urban Esthetics• Waxing Studio• Waxing the City• YG Laboratories
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
esth
etici
an |
801
.593.2
500
ESTHETICIAN
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,375* • Books/Materials: $239
• High School Students• Estimated Total Cost: $1,811
• Financial Aid Available: Scholarships, GI Bill• Schedule: Go to davistech.edu/firefighter for dates
and times• Enrollment: Go to davistech.edu/firefighter for
start dates• Length of Training: 6 months (340 hours)• Accredited: Council on Occupational Education,
Utah Fire and Rescue Academy• Utah Average Annual Job Openings: 250
FIREFIGHTER
davistech.edu/firefighter
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Hazardous materials awareness and
operations• Firefighting
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Firefighter• Utah Fire and Rescue Academy (UFRA) - Firefighter I - Firefighter II - Hazardous Materials: Awareness - Hazardous Materials: Basic Operation
EMPLOYER RELATIONSHIPS • Clinton City Fire Department• Davis County Sheriff’s Office• Farmington City Fire Department• Kaysville City Fire Department• Layton City Fire Department• North Davis Fire Department• Riverdale Fire Department• South Davis Fire Department• Syracuse Fire Department• Utah Fire and Rescue Academy• Weber Fire DistrictDA
VIS T
ECHN
ICAL
COLL
EGE
| 55
0 Eas
t 300
Sout
h, K
aysv
ille,
UT 84
037
| da
viste
ch.ed
u/fir
efigh
ter
| 80
1.593
.2500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
FIREFIGHTER
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $3,280* • Books/Materials: $935
• High School Students• Estimated Total Cost: $1,329
• Financial Aid Available: GI Bill, Pell Grants & Scholarships
• Schedule: See davistech.edu/hair-designer for dates and times
• Enrollment: See davistech.edu/hair-designer for start dates and schedules
• Length of Training: 13 months (1200 hours)• Approved: Utah Division of Occupational and
Professional Licensing• Utah Average Annual Job Openings: 880
HAIR DESIGNER
davistech.edu/hair-designer
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Beginning to advanced hair cutting• Beginning to advanced hair coloring• Beginning to advanced hair styling• Chemical texturing• Sanitation and safety• Anatomy and physiology• Chemistry and electricity• Hair design• Face shaving/Barbering• Scalp care• Hair braiding• Social media marketing• Salon business
FACILITIES• Full-service salon and spa with:
- 54 Hair Stations - Retail Store
Students are required to bring in models for services. The materials cost must be paid by the model or student.
CREDENTIALS• Davis Technical College Certificate of
Program Completion - Hair Designer• Utah Division of Occupational and Professional Licensing -
Hair Designer (must have social security number to license in Utah)
ACADEMIC AGREEMENTSTransfer credits toward an Associate of
Applied Science degree at the following: • Utah State University - Eastern • Weber State University
EMPLOYER RELATIONSHIPS• Butterfly Jac• Dollar Cuts• Embellish Salon• Great Clips• KIN• Loma• Mane Events• Salon 801• Salon Bleu• Salon on Main
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
hair-
desig
ner
| 80
1.593
.2500
HAIR DESIGNER
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,472* (pay as you go)• Books/Materials: $796
• High School Students• Estimated Total Cost: $40/year
• Financial Aid Available: Scholarships• Schedule: M-Th 6-9 pm• Enrollment: Year round• Length of Training: 24 months (720 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 560• Placement Rate: 100%
HEATING ANDAIR CONDITIONING
davistech.edu/heating-and-air-conditioning
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Basic safety• HVAC basics• Hand and power tools• Fundamentals of electricity• Metal piping systems• Plastic and copper piping• Blueprint reading• Heat pumps• Gas heating• Basic rigging• Evaporative cooling• Duct systems• Gas furnaces• Dual fuels• Electric furnaces• Braze tubing• Operation and testing of
electric furnaces• Solid-state electronics and
devices
• Residential system sizing, design, fabrication, and evaluation
• Reclaiming, recovery, and recycling refrigerant
• Troubleshooting of HVAC accessories
• Hydronic heating and cooling systems
• Coefficient of performance (COPs)
• Heating season performance factor (HSPFs)
• Energy conversation equipment
• Economizers and swamp coolers
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion –
Heating and AirConditioning• Environmental Protection Agency (EPA) Section 608,
CFC Refrigerant Handling Certification• ESCO Institute Green Awareness Certification• Gastite Corrugated Stainless Steel Tubing (CSST)
Natural Gas Piping Certification• Mobile Air Conditioning Society Section 609• North American Technical Excellence (NATE) Air Distribution• North American Technical Excellence (NATE) Gas Heating• North American Technician Excellence (NATE) Core and
Heat Pumps Certification• OSHA Safety (10-Hour)• Rocky Mountain Gas Association (RMGA) National Gas
Technician Certificate• Tracpipe• Werner Ladder Safety
EMPLOYER RELATIONSHIPS• Air Conditioning and Heating Service• Central Heating, Inc.• Dick Kearsley Service Center• Goodman Manufacturing• Gustave A. Larson Company• HVAC Utah• Johnstone Supply• Just Right Heating and Cooling LLC• Larsen HVAC • Pond’s Plumbing, Heating, and Air Conditioning• Salmon HVAC• Smedley and Associates
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
heat
ing-a
nd-a
ir-co
nditi
oning
| 8
01.59
3.250
0 HEATING ANDAIR CONDITIONING
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
HOME HEALTH AIDEJOB CORPS STUDENTS ONLY
WHY DAVIS TECHNICAL COLLEGE?• Total tuition and fees: $630*
• Job Corp Students – High School Student Fees: $40/year (additional class fees may apply)
• Books/Materials: $0
• Schedule: See Job Corps advisor for enrollment schedules
• Length of Training: 2-3 months (300 hours)
• Accredited: Council on Occupational Education
• Approval: Utah Nursing Assistant Registry
• Utah Average Annual Job Openings: 540
• Location: Clearfield Job Corps Instructional Service Center and is only open to Job Corps students
CLEARFIELD JOB CORPS INSTRUCTIONAL SERVICE CENTER
davistech.edu/home-health-aide
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
PROGRA M
JOB CORPS
SKILLS AND CONCEPTS TAUGHT• Taking and recording residents’ vital signs• Recognizing and reporting changes in resident
condition and observing and reporting abnormalities• Caring for residents when death is imminent• Personal care of residents (activities of daily
living- ADL’s)• Bathing and toileting residents• Assisting residents with nutrition and hydration• Skin care, transfers, positioning, and ambulation• Promoting resident independence
EQUIPMENT AND FACILITIES• Simulated resident rooms• Hospital beds• Mechanical lift• Sit to stand lift• Standard medical equipment
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Nurse Assistant• Nurse Assistant Certification (CNA) - Completed
through the Utah Nurse Assistant Registry• Food handlers permit - Utah Department of Health
(DOH)• Basic Life Support through American Heart
Association
EMPLOYER RELATIONSHIPS• Apple Village Assisted Living• Fairfield Village of Layton• LifeCare Center• Mountain View Health Services• Rocky Mountain Care Center• Specialty Hospital of Utah• Interim Healthcare• Visiting Angels
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
home
-hea
lth-a
ide |
801
.593.2
500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
HOME HEALTH AIDE
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $1,891* (pay as you go)• Books/Materials: $1,024
• High School Students• Estimated Total Cost: $732
• Financial Aid Available: Pell Grants, Scholarships• Schedule: M-F 8-11 am and 12-3 pm, M-Th 3-9 pm• Enrollment: Open enrollment, year round• Length of Training: 7 months (660 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 1,110• Placement Rate: 82%
INFORMATIONTECHNOLOGY
davistech.edu/information-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• General Information
technology• Windows, Linux, and
Mac Operating Systems• Android and iOS configuration• Basic programming concepts• Database fundamentals• Web development
fundamentals• Patch and update
management• Building and maintaining
PC server hardware• Virus and malware removal• HTML5, CSS3• TCP/IP networking (IPv4 and
IPv6)
• Firewalls and VPNs• Wireless network installation
and management• System and network
troubleshooting• System and network
management• Enterprise security• Security policy/security
compliance• Information assurance• Ethernet LANs/VLANs• Multi-layer switch
configuration• VMware/virtualization
CREDENTIALS AVAILABLE• Davis Technical College
Certificate of Program Completion - Information Technology
• CompTIA A+ Essentials 2019 (Exam 220-1001)
• CompTIA A+ Practical Application 2019 (Exam 220-1002)
• CompTIA IT Fundamentals FC0-U61
• MTA Network Fundamentals (Exam 98-366)
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:
• Weber State University• Western Governors
EMPLOYER RELATIONSHIPS• Avant Guard• BAE• CenturyLink• Davis School District• Executech• Freeus• TEK Systems• Unisys Corporation
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
infor
matio
n-te
chno
logy
| 8
01.59
3.250
0 INFORMATIONTECHNOLOGY
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,129* • Books/Materials: $843
• High School Students• Estimated Total Cost: $60
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm• Enrollment: Open enrollment, year round• Length of Training: 9 months (765 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 260• Placement Rate: 86%
INJECTIONMOLDING
davistech.edu/injection-molding
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
More information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Math for injection molding
technicians• Basic injection molding
machine operations• Practical injection
molding• Injection molding
changeovers• Economics of injection
molding operations• Injection molding auxiliary
equipment• Hot runner molding
solutions• Process development and
decoupled molding
• Standardized process tests
• Injection molded part problems and solutions
• Basic automation for injection molding
• Injection molding maintenance
• Advanced process development using cavity pressure
• Advanced robot programming
• Fluid power hydraulics• Statistical process control
for plastic processors
EQUIPMENT• 55-ton Milacron RoboShot
Electric Molding Machine• 66-ton Arburg 370E
Electric Molding Machine• 88-ton Krauss Maffei PX
Electric Molding Machine• 22-ton Arburg 270S
Hydraulic Molding Machine
• 220-ton Milacron F Series Packaging Molding Machine
• 150-ton Toyo Hydraulic Molding Machine
• Yushin YC-150 3-Axis servo robot
• Yushin Sprue Picker• Krauss Maffei LXR50
servo robot
• 5-ton chiller• Desiccant material dryer• Gantry crane• Hopper loaders• Central Resin Conveying• Hot runner molds and
controllers• Lenzkes quick change
mold clamps• Mold temperature
controllers• 36+ Molds (two plate,
three plate, and hot runner molds)
• Paulson injection molding training software
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion -
Plastic Injection Molding
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Weber State University
EMPLOYER RELATIONSHIPS• BD Medical • Fresenius Medical Care• Lifetime Products• Merit Medical • Orbit Irrigation
• Streamline Plastics• Ultradent Products
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
injec
tion-
mold
ing |
801.5
93.25
00
INJECTIONMOLDING
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $1,213* • Books/Materials: $534
• High School Students• Estimated Total Cost: $40
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 5 months (400 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 100
MANUFACTURINGTECHNOLOGY
davistech.edu/manufacturing-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
More information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT Students will have the opportunity to learn about the following Manufacturing programs. Students will spend time in each program learning some of the basic skills used in each industry.• Introduction to manufacturing• Welding • Automation/maintenance• Composites• Blueprint reading• Machining• Injection molding
CREDENTIALS AVAILABLE• Davis Technical College Certificate of
Program Completion – Manufacturing Technology
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
manu
fact
uring
-tech
nolo
gy |
801.5
93.25
00
MANUFACTURING TECHNOLOGY
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,940* • Books/Materials: $584
• High School Students• Estimated Total Cost: $2,042
• Financial Aid Available: GI Bill• Schedule: See davistech.edu/advanced-esthetician
for dates and schedules• Enrollment: Five training start dates per year• Length of Training: 9-12 Months (600 hours)• Accredited: Council on Occupational Education• Approved: Utah Division of Occupational and
Professional Licensing• Placement Rate: 89%
MASTERESTHETICIAN
davistech.edu/master-esthetician
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT • Structure and composition of skin• Maintenance of healthy skin• Advanced and basic skin care procedures including: - Facials - Facial massage - Advanced hair removal - Advanced chemical peels - Advanced makeup application - Microdermabrasion - Ultrasonic, LED light, and microcurrent facials - Body treatments - Eyelash extensions (elective course)Students are required to bring in models for services. The materials cost must be paid by the model or student.
EQUIPMENT• High frequency/iontophoresis • Galvanic machine machine • Laser hair removal• Facial steamers • Lucas sprayer• LED facial machine • Ultrasonic facial machine• Microdermabrasion crystal and • Microcurrent facial machine
crystal-free machines • Sublative skin rejuvenation• Intense pulse light treatment laser skin tightening
CREDENTIALS• Davis Technical College Certificate of Program Completion –
Master Esthetician• Utah Division of Occupational and Professional Licensing –
Master Esthetician (Must have social security number to license in Utah)
EMPLOYER RELATIONSHIPS• Anew Laser• Benefit Cosmetics• Beyond Spa• Borboleta• Elase Medspa• Eminence Organic Skincare• Flawless Laser Salon and Spa• Glymed• Grand America• Image Skin Care• Jane Iredale • Main Attractions Day Spa• M’Lis• New Image Day Spa• Ogden Clinic• Phazes Salon and Spa• Platinum Image Salon and
Day Spa• Profiles Salon and Day Spa• Pureza Spa• Salon & Spa Fifth Avenue• Sego Lily Day Spa• Surface Medical Spa• Syneron Candella • Timeless Medical Spa• Ulta Farmington Station• Urban Esthetics• Waxing the City• Waxing Studio• YG Laboratories
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
mast
er-e
sthe
tician
| 8
01.59
3.250
0 MASTERESTHETICIAN
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
MEDICALASSISTANT
davistech.edu/medical-assistant
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $4,195* • Books/Materials: $808
• High School Students• Estimated Total Cost: $539
• Licensure Cost: $125 (upon graduation)• Financial Aid Available: Pell Grants, Scholarships,
GI Bill• Schedule: M-F 8-11 am and 12-3 pm• Enrollment: Open enrollment, year round• Length of Training: 15 months (1400 hours)• Accredited: Council on Occupational Education,
Commission on Accreditation of Allied Health Education Programs upon recommendation of Medical Assisting Education Review Board
• Utah Average Annual Job Openings: 1,340• Placement Rate: 97%
SKILLS AND CONCEPTS TAUGHT• Medical terminology• Anatomy and physiology of the human body• Preparing for clinical procedures and assisting
with examinations• Laboratory procedures• Cardiology• Radiology• Minor surgical procedures• Pharmacology and medication administration
procedures• Rehabilitation and healthy living• First aid• Responding to medical emergencies
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion - Medical Assistant• Certified Medical Assistant (AAMA) certification
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science
degree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Vallley University• Weber State University
EMPLOYER RELATIONSHIPS• Circle of Life Women’s
Center • Dr. Grant Christian• HCA Physician
Services• Intermountain
Healthcare
• Jordan Ridge Family Medicine
• Layton Family Medicine
• Ogden Clinic• Tanner Clinic
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
medic
al-a
ssist
ant
| 80
1.593
.2500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
MEDICAL ASSISTANT
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,502* • Books/Materials: $1,770
• High School Students• Estimated Total Cost (Office Emphasis): $597• Estimated Total Cost (Coder Emphasis): $691
• Licensure Cost (Coder Emphasis): $978 (upon graduation)
• Schedule: M-F 8-11 am and 12-3 pm• Enrollment: Open enrollment, year round• Length of Training: 11 months (975 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 170• Placement Rate: 92%
MEDICAL OFFICEADMINISTRATION
davistech.edu/medical-office-administration
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Operating systems,
email, word processing, spreadsheet, and ten-key calculations
• Medical terminology, law, and ethics• Medical office
administrative procedures• Body structures and
functions• Medical insurance billing and coding• Medical coding software• Electronic health records
• Diagnostic coding • Electronic information
technology regulations• Procedural coding• Medical coding simulations • Dental terminology, law, and ethics• Dental insurance • Dental office administrative
procedures• Dentrix and Eaglesoft
dental software• Medical coding for dental
offices
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion –
Medical Office Administration• Certified Electronic Health Records Specialist (CEHRS)• Certified Medical Administrative Assistant (CMAA)• Certified Professional Coder (CPC) Certification
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Aspen Ridge Medical• Davis Hospital• eAssist Dental Solutions, Inc.• HCA Mountain Star• Hill Air Force Base• Layton Smiles Dentistry• Ogden Clinic• Sanford Rose Associates• Sceptre Management• Tanner Clinic• University Hospital Business
Services• Utah Health Information
Network• O.C. Medical• Pacific Dental Services
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
medic
al-o
ffice
-adm
inist
ratio
n |
801.5
93.25
00
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
MEDICAL OFFICEADMINISTRATION
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $847* • Books/Materials: $1,137
• High School Students• Estimated Total Cost: $1,258
• Financial Aid Available: Scholarships, GI Bill• Schedule: See davistech.edu/nail-technician
for dates and times• Enrollment: Six training start dates per year• Length of Training: 4 months (304 hours)• Accredited: Council on Occupational Education• Approved: Utah Division of Occupational and
Professional Licensing• Placement Rate: 96%
NAIL TECHNICIAN
davistech.edu/nail-technician
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• State board prep class• Acrylic nail enhancement• UV gel nails• Nail art• Sanitation and safety• Nail anatomy• Nail diseases and disorders• Nail chemistry• Nail tips • Basic manicures• Spa manicures• Pedicures• Gel polishStudents are required to bring in models for services. The materials cost must be paid by the model or student.
EQUIPMENT• Professional nail salon with 16 nail tables• 12 massaging pedicure thrones• LED lamps for UV gels• Electric files• Classroom equipped with 12 nail tables and
instructional camera
CREDENTIALS AVAILABLE• Davis Technical College Certificate of
Program Completion – Nail Technician• Utah Division of Occupational and Professional
Licensing – Nail Technician
EMPLOYER AND PRODUCT COMPANY RELATIONSHIPS• Crazy Beautiful• Creative Nail Design• Dazzlin Digits• Nail Crush• Nailed
• Polished Pinkies• Randi’s Nails• Salon 801• Salon Blue• Salon Fringe
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
nail-
tech
nician
| 8
01.59
3.250
0
NAIL TECHNICIAN
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $388* • Books/Materials: $282*
• High School Students• Estimated Total Cost: $141
• Licensure Cost: $85 (upon graduation)• Financial Aid Available: Scholarships, GI Bill• Schedule: M-F 8-11 am and 12-3 pm• Enrollment: See davistech.edu/nurse-assistant for
dates/times• Length of Training: 1-2 months (115 hours)
(Actual completion dependent on clinical availability)• Accredited: Council on Occupational Education• Approval: Utah Nursing Assistant Registry• Utah Average Annual Job Openings: 1,750• Placement Rate: 73%
NURSE ASSISTANT
davistech.edu/nurse-assistant
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Taking and recording residents’ vital signs• Recognizing and reporting changes in residents’
conditions and observing and reporting abnormalities• Caring for residents when death is imminent• Personal care of residents (activities of daily
living ADL’s)• Bathing and toileting residents• Assisting residents with nutrition and hydration• Skin care, transfers, positioning, and ambulation• Promoting resident independence
EQUIPMENT AND FACILITIES• Simulated resident rooms• Hospital beds• Mechanical lift• Sit to stand lift• Standard medical equipment
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Nurse Assistant• Nurse Assistant Certification (CNA) - Completed
through the Utah Nurse Assistant Registry
EMPLOYER RELATIONSHIPS• Apple Village Assisted Living• Fairfield Village of Layton• LifeCare Center• Mountain View Health Services• Rocky Mountain Care Center• Specialty Hospital of Utah• Interim Healthcare• Visiting Angels• South Davis Community Hospital
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
nurs
e-as
sista
nt |
801
.593.2
500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
NURSEASSISTANT
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,049* • Books/Materials: $636
• High School Students• Estimated Total Cost: $230
• Licensure Cost: $210 (upon graduation)• Financial Aid Available: Pell Grants, Scholarships,
GI Bill• Schedule: M-F 8-11 am and 12-3 pm• Enrollment: Program Requirement Packet accepted,
see davistech.edu/pharmacy-technician for details• Length of Training: 9-11 months (750 hours)• Accredited: American Society of Health - System
Pharmacists, Council on Occupational Education• Utah Average Annual Job Openings: 480• Placement Rate: 100%
PHARMACYTECHNICIAN
davistech.edu/pharmacy-technician
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Pharmaceutical calculations• Prescription filling• Pharmacology• Externship• Sterile compounding• Nonsterile compounding• Resumé writing• Professionalism
FACILITIES• Simulated retail pharmacy• Simulated hospital pharmacy• Simulated compounding pharmacy
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Pharmacy Technician• Certified Pharmacy Technician (CPhT)
EMPLOYER RELATIONSHIPS• Associated Foods• Bowman’s• Depot Drug• Harmon’s• Health Mart Pharmacies• Intermountain Healthcare• Lee’s Marketplace• MedQuest Pharmacy• MountainStar Healthcare• Professional Plaza Pharmacy• Red Rock Pharmacy• Smith’s Food and Drug• Steward Health• Tibbitt’s Family Pharmacy• University Healthcare • Walgreens• Wasatch Pharmacy Care• West Gordon Pharmacy
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
phar
macy
-tech
nician
| 8
01.59
3.250
0
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
PHARMACYTECHNICIAN
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $479* • Books/Materials: $128
• High School Students• Estimated Total Cost: $117
• Financial Aid Available: Scholarships, GI Bill• Schedule: M&W 6-9 pm, T&Thu 6-9 pm• Enrollment: Go to davistech.edu/phlebotomy
for start dates and schedules• Length of Training: 3 months (100 hours)• Utah Average Annual Job Openings: 200• Placement Rate: 90%
PHLEBOTOMY
davistech.edu/phlebotomy
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Anatomy and physiology• Blood and cell composition• Blood sampling• Laboratory safety• Standard phlebotomy equipment - Syringes - Multi-sample blood collection
needles - Tourniquets - Safety trainer devices - Blood culture bottles - Microtainers - BD Eclipse - Portex needle pro - Microhematocrit tubes - Centrifuges - Lancets
CREDENTIALS AVAILABLE• Davis Technical College Certificate of
Program Completion – Phlebotomy
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
phle
boto
my |
801
.593.2
500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
PHLEBOTOMY
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,472* (pay as you go)• Books/Materials: $659
• High School Students• Estimated Total Cost: $50
• Licensure Cost: $192 (upon graduation)• Financial Aid Available: Scholarships• Schedule: See davistech.edu/plumbing-apprentice
for dates and times• Enrollment: Program starts in August and January
each year• Length of Training: 720 hours (48 months while
working full-time in the field)• Utah Average Annual Job Openings: 1,010• Placement Rate: 100%
PLUMBINGAPPRENTICE
davistech.edu/plumbing-apprentice
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Safety and basic hand tools• Pipe fittings• Plumbing math• Plumbing materials - Weight pipe - Copper tubing - Plastic pipe - Welded steel piping• Fixtures and faucets• Water heaters• Water supply and distribution• Toilet and urinal installation and maintenance• Secondary drainage, indirect, and special waste• International Plumbing Code• State regulations• Traps and storm drainage• Oxy-acetylene cutting and welding• Boilers, pressure vessels, refrigeration, and
hydronic piping
EQUIPMENT• Modern fixture lab• Simulated and functional plumbing installations• Water heater training center• Hydraulic heating simulator• Large work lab and tools
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion
- Plumbing Apprentice• Eligible to take Utah State Journeyman Plumber
License Test
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Sciencedegree at the following:• Weber State University (or AAS in Apprenticeship (Plumber)• Salt Lake Community College (or AAS in
Apprenticeship(Plumber Independent Technology)
EMPLOYER RELATIONSHIPS• D C Plumbing• Decker’s Plumbing• Durrant & Slate Plumbing• Fred Mitchell Plumbing,
Inc.• G and S Sales• Island View Plumbing• Kevin Barkdull Plumbing and Heating, Inc.• Knighton Plumbing
• Mountain States Plumbing Supply• Peterson Plumbing Supply• Robert W. Speirs Plumbing, Inc.• Shamrock Plumbing
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
plum
bing-
appr
entic
e |
801.5
93.25
00
PLUMBINGAPPRENTICE
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• College Admission Fee: $45 • Total Tuition and Fees: $2,565* (pay as you go)• Books/Materials: $1,526• Financial Aid Available: Pell Grants, Scholarships,
GI Bill• Schedule: See davistech.edu/practical-nurse for
dates and times• Enrollment: Applications accepted three times a
year, see davistech.edu/practical-nurse for details• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education
(COE), Accreditation Commission for Education in Nursing (ACEN)
• Utah Average Annual Job Openings: 190• Program Completion Rate: 100%• Licensure Examination Pass Rate: 98%• Placement Rate: 100%
PRACTICAL NURSE
davistech.edu/practical-nurse
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
PROGRAM COMPETENCIES• Provide patient-centered care• Engage in teamwork and collaboration• Employ evidence-based nursing practice• Utilize quality improvement methods• Maintain patient safety• Utilize informatics
RESOURCES• Two nursing labs • Simulation mannequins• Computer lab• State-of-the-art patient care equipmentAs of Fall 2020, the new allied health building will include a state-of-the-art simulation suite, a student practice lab, student study areas, and seven classrooms.
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion – Practical Nurse
• Eligibility of Practical Nurse Licensure through the Division of Occupational Professional Licensing (DOPL)
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at:
• Dixie State University • Ensign College • Southern Utah University • Utah State University • Utah Valley University • Weber State University • Western Governors
EMPLOYER RELATIONSHIPS• Davis Hospital & Medical Center• Ivy Lane Pediatrics• Lakeview Hospital• McKay-Dee Hospital• Milestone Healthcare• Ogden Regional Medical Center• Ogden Weber Technical College• Primary Children’s Hospital• South Davis Community Hospital• George E. Wahlen Ogden Veterans Home• Weber State University
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
prac
tical
-nur
se |
801
.593.2
500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
PRACTICALNURSE
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,384* (pay as you go)• Books/Materials: $405
• High School Students• Estimated Total Cost: $40/year
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 10 months (930 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 1,550• Placement Rate: 87%
SOFTWAREDEVELOPMENT
davistech.edu/software-development
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Software development principles• Database fundamentals• Web development fundamentals• Visual Basic• Java• Visual C#• C++• HTML5 and CSS3• PHP and MySQL• Version control• Mobile development • SQL• Unit testing• JavaScript• Teamwork
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program Completion - Software Development• Utah State Board of Education CTE Skill Certificate (High School Students Only)
- Computer Programming 1A - Computer Programming 1B (VB) - Web Development 1A
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University• Western Governors
EMPLOYER RELATIONSHIPS• AvantGuard• Davis Technical College• Freeus• H&R Block• i5 Services• Mindfire• Orbit Irrigation
SOFTWAREDEVELOPMENT
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
softw
are-
deve
lopm
ent
| 80
1.593
.2500
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• College Admission Fee: $45• Total Tuition and Fees: $4,506* (pay as you go)• Books/Materials: $1,778• Financial Aid Available: Pell Grants, Scholarships,
GI Bill• Schedule: M-Th 8-11 am and 12-3 pm• Enrollment: Applications required,see
davistech.edu/surgical-technology for details• Length of Training:
Foundation courses (prerequisities): 3-5 months Core Surgical Technology Courses: 10-13 months
• Accredited: Council on Occupational Education (COE), Commission on Accreditation of Allied Health Education Programs (CAAHEP)
• Utah Average Annual Job Openings: 180• Placement Rate: 90%
SURGICALTECHNOLOGY
davistech.edu/surgical-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Medical terminology• Medical law and ethics• Anatomy and physiology• Microbiology• Surgical technology, principles, and procedures• Surgical pharmacology
EQUIPMENT• Fully equipped operating suite/laboratory• Specialty surgical instrumentation sets
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion - Surgical Technology• Certified Surgical Technologist (CST)
through National Board of Surgical Technology and Surgical Assisting (NBSTSA)
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Sciencedegree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Davis Hospital and Medical Center• McKay-Dee Hospital• Lakeview Hospital• Ogden Regional Medical Center• Primary Children’s Medical Center• Salt Lake Regional Medical Center• University of Utah Medical Center• VA SLC Healthcare Center
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
surg
ical-t
echn
olog
y |
801.5
93.25
00
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
SURGICALTECHNOLOGY
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $2,382* (pay as you go)• Books/Materials: $468
• High School Students• Estimated Total Cost: $40/year
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8 am-3 pm, M-Th 3 pm-9 pm• Enrollment: Open enrollment, year round• Length of Training: 10 months (900 hours)• Accredited: Council on Occupational Education• Utah Average Annual Job Openings: 270• Placement Rate: 78%
WEB ANDGRAPHIC DESIGN
davistech.edu/web-and-graphic-design
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
For more information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Digital graphic design• Adobe Photoshop• Adobe Illustrator• Responsive web design and development• HTML5, CSS3, Sass, Javascript, and PHP• Wordpress theme development• Adobe Premiere Pro• Adobe After Effects• Adobe InDesign
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion - Web and Graphic Design• Adobe Certified Associate (ACA) - Visual Communication using Adobe Illustrator CC - Visual Communication using Adobe InDesign CC - Visual Communication using Adobe Photoshop CC - Visual Communication using Adobe Premiere Pro CC• Adobe Certified Expert (ACE) CC - Adobe Illustrator - Adobe InDesign - Photoshop - Premiere Pro
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Science degree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• Fluid• Forth Gear• McKinnon-Mulherin, Inc.• Mighty Clever• SEO Nation• Spy Hop Productions• Targa Media, Inc.
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
web-
and-
grap
hic-d
esign
| 8
01.59
3.250
0 WEB ANDGRAPHIC DESIGN
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.
WHY DAVIS TECHNICAL COLLEGE?• Adult Students
• College Admission Fee: $45• Total Tuition and Fees: $3,958* • Books/Materials: $1,273
• High School Students• Estimated Total Cost: $56
• Financial Aid Available: Pell Grants, Scholarships, GI Bill
• Schedule: M-F 8-11 am and 12-3 pm, M-Th 6-9 pm• Enrollment: Open enrollment, year round• Length of Training: 11 months (1000 hours)• Accredited: Council on Occupational Education,
American Welding Society - Accredited Testing Facility
• Utah Average Annual Job Openings: 760• Placement Rate: 85%
WELDINGTECHNOLOGY
davistech.edu/welding-technology
550 East 300 South Kaysville, UT 84037801.593.2500davistech.edu
More information about this program and current cost information go to:
More information on reverse >
SKILLS AND CONCEPTS TAUGHT• Welding safety• Blueprint reading• Welding math• Shielded metal arc
welding• Flux-cored arc welding• Gas tungsten arc
welding• Stainless steel welding
• Aluminum welding• Pipe welding• Oxy fuel, plasma, and
carbon arc cutting processes
• Gas metal arc welding• Weld inspection and
metallurgy
EQUIPMENT AND FACILITIES• Lincoln Electric
National Training Center
• System 5 robotic welder• Subarc welder• Pulse welders• TIG welders
• MIG welders• VRTEX 360 virtual
welders• Official American
Welding Society (AWS) Accredited Test Facility
CREDENTIALS AVAILABLE• Davis Technical College Certificate of Program
Completion - Welding Technology• American Welding Society Certified Welder
ACADEMIC AGREEMENTSTransfer credits toward an Associate of Applied Sciencedegree at the following:• Dixie State University• Ensign College• Southern Utah University• Utah State University• Utah Valley University• Weber State University
EMPLOYER RELATIONSHIPS• HHI Corporation• Lincoln Electric Company-District Office• Norco• Ore Designs• UA Local 140• Utility Trailer
DAVI
S TEC
HNIC
AL CO
LLEG
E |
550 E
ast 3
00 So
uth,
Kay
svill
e, UT
8403
7 |
davis
tech
.edu/
weld
ing-te
chno
logy
| 8
01.59
3.250
0 WELDINGTECHNOLOGY
8/20
*Cost will vary depending on individual course selection. Add an $18 certificate processing fee to be paid upon program completion. Items listed are subject to change. Please visit davistech.edu/programs for the most current information. Davis Technical College offers training to all applicants regardless of race, color, national origin, age, sex or disability. Average earnings as it appears on careeronestop.org sponsored by the U.S. Department of Labor.