ADVA FSP 3000 Technical Overview.pdf
Transcript of ADVA FSP 3000 Technical Overview.pdf
Robust design and superior
coverage, backed by experts
OpticalSpectrumServices
ADVA FSP 3000
Technical overview
The information provided within this pack represents no commitment and is not intended to be an offer in whole or part. Openreach makes every effort to ensure the information is accurate at the time of compilation, however, Openreach does not represent that it is complete and Communications Providers should check with Openreach for the latest available information.
It should be noted that proposals for the products outlined in this slide-pack represent Openreach’s current view at the time of publication. These proposals may change through further development and feedback. All timescales are target estimates only. Any developments carried out by CPs based on this information are therefore entirely at the CP’s own risk.
Some statements involve risks and uncertainties. Actual outcomes may differ materially from those expressed or implied by these forward-looking statements, which may include, without limitation, changes in market conditions; supplier arrangements; future regulatory actions and conditions.
The information contained in these slides is to be used for information purposes only and must not be modified without express permission in writing from British Telecommunications plc.
This pack is updated intermittently. The Openreach portal should always be referred to for the latest product and contractual information.
British Telecommunications plc Registered office: 81 Newgate Street London EC1A 7AJ Registered in England no. 1800000
© British Telecommunications plc 2010
About this pack
OSA overview ADVA FSP 3000
Enhanced optical terminating equipment from ADVA
Optical Networking
Attractive entry level prices
Commercial and technical flexibility (via Slimline & 7U
chassis)
Route distance range – up to 100Km available
Efficient use of space and power
Wide range of flexible options for design
Additional resilience capability for RO1 circuits
Improved management of technical data for customers
Approved to Impact Level 2
System latency Initial view available
at pre design stage
with actuals upon
installation
Lead times
targeted at 35
working days
for forecast orders
A fully featured, high capacity chassis, with slimline
(1U) and 7U options which provides the flexibility to
meet an extensive range of needs at a great price.
Slimline 1U chassis
1U has a double card slot capability. This can run either
without filters (max 1 wavelength) or with an additional 1U
passive filter shelf (max 4 wavelengths)
Standard and RO2 bearer options
Ideal to deliver higher volumes of 1Gig services
Standard 7U chassis
Chassis capacity - 12 channels, less if double-width
transponders or RO1 used. Bearer will have capacity for 32
optical channels, in most cases this will require 3 chassis, but
could be more if double-width cards are used
Standard, RO1* and RO2 bearer options
Future FSP 3000 developments – rings & chains
* RO1 uses a protection module known as the VSM card. This will
protect against fibre breaks only and will use one wavelength on
the bearer, leaving 31 for customer use.
OSA overview ADVA FSP 3000
ADVA FSP 3000 Slim line 1U chassis
Single (1 slot) – with RO2 option
1U high chassis for a single wavelength (all card types)
Compact service option
Can be upgraded by adding expansion
filters and chassis.
Standard (2 slots) – with RO2 option
Enables the build of a mini Optical system to cater for
up to four wavelengths
Can be grown by adding extra modules.
1U chassis offers a choice of
configurations and a low entry price
product to meet light initial requirements.
Uses less space in the exchange and
provides an ideal solution where there is
limited space to terminate an Optical
service.
The single (1 slot) option allows you to
start small with lower risk.
Choosing an additional filter pack
(standard option) will enable you to grow
capacity easily (up to 4 wavelengths) and
at your own pace. Service Card Slot 2 (Not Used)
Service Card Slot 1
(Contains LES10000 service card)
Service Card Slot 2 (Not Used)
Service Card Slot 1
(Contains LES10000 service card)
Service Card Slot 2 (Not Used)
Service Card Slot 1
(Contains LES10000 service card) 1U high chassis
(two slots)
Passive shelf
required for
filters
ADVA FSP 3000 7U high chassis option
A fully featured, high capacity chassis
which provides the flexibility to meet an
extensive range of needs at a great
price.
16 slots available for all card types
including transponders, filters, protection
cards and optical supervisory cards
12 channel chassis capacity (less if
double-width transponders or RO1 used)
32 optical channel** bearer capacity (in
most cases this will require 3 chassis,
more if double-width cards are used)
Resilient options RO1 and RO2.
FSP 3000 distance support
The FSP 3000 provides increased distance support by means of end point optical amplifiers. Distances of up to 103km route can be supported.
It has been agreed that planning rules will be introduced so that 4Gig cards can be deployed with a shorter reach.
Service offering
10Gb
Access Card
Dual Port D09533
(km)
4Gb
Access Cards
4 Port D09529
4 Port D09530
(km)
10Gb
Core Card
Dual Port D09531
(km)
2.5Gb & 10Gb
Enterprise &
Core Cards
5 Port D09534
10 Port D09532
Single Port D09526
Single Port D09527
Dual Port D09528
(km)
OSA RO1 with booster +
pre-amp
50 64 71 100
OSA standard & RO2 with
booster + pre-amp
66 72 76 103
About Impact Level 2 (IL2)
Assurance that the FSP 3000 systems/products meet the security level 2.2.4 for Confidentiality, Integrity and Availability respectively.
Allows the ADVA FSP 3000 to be used to tender for Her Majesty's Government (HMG) network contracts at the ‘PROTECT’ level.
Benefits to you:
Enables/supports bids in key sectors
Peace of mind at no extra cost
Covers new and existing circuits
Can be built upon by you to offer even greater security
Interface card details and
design parameters
Card options
D-code Bandwidth Protocols
Single port cards D09527 2.5Gb STM16, GE, STM-4, STM-1, OTU1
D09526 10Gb STM64, 10GbE WAN, 10GbE LAN and 10G FC, OTU2
Multi-port cards
4 port (Data) D09529 4Gb GEx4, 1Gb FCx4, 2Gb FCx2, 4Gb FC, 2G Coupling Link
4 port (TDM) D09530 4Gb STM1x4, STM4x4, 1GEx4
10 port D09532 10Gb GEx9, 1Gb FCx10, 2Gb FCx5, 4Gb FCx2, STM1x10, STM4x10, STM16x3
2 port D09528 2.5Gb STM16, 1GFCx2 GbEx2, OTU1
2 port D09531 10Gb STM64, 10GbE WAN, 10GbE LAN, 8Gb FC, OTU2 (10GFC not supported)
2 port
D09533 10Gb STM64, 10GbE WAN, 10GbE LAN, 4Gb FC, 8GFC, OTU2 (10GFC not supported) *Low latency card*
5 port D09534 Max 10Gb 1Gb/2Gb/4Gb/8Gb/10Gb FC, GE, 10GE (LAN PHY only), ISC-3
ADVA FSP 3000 – card options
OSA guidelines – FSP 3000 Protocol support
Service Supported Interfaces
CORE CARDS ENTERPRISE ACCESS CARDS
WC
C-P
CT
N-1
0G
(D09
52
6)
2W
CC
-PC
N-1
0G
(D09
53
1)
10
TC
C-P
CT
N-4
GU
S+
10
G
(D09
53
2)
2T
WC
C-P
CN
-2G
7U
(D09
52
8)
WC
C-P
C1N
-2G
7U
(Do9
52
7)
5T
CE
-PC
TN
-10
GU
+1
0G
(D09
53
4)
4T
CA
-PC
N-4
GU
+4
G
(D09
52
9)
4T
CA
-PC
N-4
GU
S+
4G
(D09
53
0)
2W
CA
-PC
N-1
0G
(D09
53
3)
TDM
STM-1 X X X
STM-4 X X X
STM-16 X X X
STM-64 X X X
Ethernet
Gig E X X X X X
10GE LAN PHY X X X X
10GE WAN PHY X X X
SAN Services
1G Fibre Channel / FICON X X X X
2G Fibre Channel / FICON Express X X X X
4G Fibre Channel / FICON X X X X
8G Fibre Channel / FICON X X X
10G Fibre Channel X X X
OTN
OTU1 X X
OTU2 X X X
OSA guidelines – FSP 3000 Port information
Traffic cards Network Port Client Ports
Max
rat
e p
er
po
rt
Inte
rfac
e ty
pe
Qu
anti
ty
Max
rat
e p
er
po
rt
Inte
rfac
e t
ype
Qu
anti
ty
Core Cards
WCC-PCTN-10G (D09526) 11G Tuneable 1 11G XFP 1
2WCC-PCN-10G (D09531) 11G XFP 2 11G XFP 2
10TCC-PCTN-4GUS+10G (D09532) 10.7G Tuneable 1 4G SFP 10
2TWCC-PCN-2G7U (D09528) 2.6G SFP 2 2.6G SFP 2
WCC-PC1N-2G7U (D09527) 2.6G SFP 1 2.6G SFP 1
Enterprise Cards
5TCE-PCTN-10GU+10G (D09534) 11.3G Tuneable 1 10.5G
SFP,
SFP+ 5
Access Cards
4TCA-PCN-4GU+4G (D09529) 4.25G SFP 2 4.25G SFP 4
4TCA-PCN-4GUS+4G (D09530) 4.25G SFP 2 1.25G SFP 4
2WCA-PCN-10G (D09533) 10.7G XFP 2 10.7G XFP 2
OSA guidelines – FSP 3000 Interface support
1310nm Single mode fibre client interfaces
Available for all protocols
Default unless you state otherwise
850nm Multi mode fibre client interfaces
Available for protocols less than 4G
Not used for SDH and OTN interfaces
OSA FSP 3000 solution Protocol support
OTN
OTU-1
OTU-2
SDH
STM-1
STM-4
STM-16
STM-64
Ethernet
GbE
10GbE LAN PHY
10GbE WAN PHY
SAN / HPC
1G FC/FICON
2G FC/FICON 4G FC/FICON 8G FC/FICON 10G FC/FICON 2G/ ISC-3 NEW Coupling Link
OSA UPDATES › New protocol support
› Removal of low volume, low bandwidth protocols
› Greater certification
Sysplex Timer ETR & CLO
G-link
Fast Ethernet
Coupling Link 1G
OSA FSP 3000 solution Resilience options
VSM Protection
Unprotected
Single OSA Bearer Diversely routed fibre paths. Traffic automatically switched to secondary fibre path in the event a problem occurring on the primary route
OSA Resilience Option 1 (RO1) SITE-A
SITE-A
SITE-B
SITE-B
Client Protection
SITE-B
Tr Client Tr Client
Two OSA Bearers Diversely routed fibre paths No automatically protection switching (must be done via customer client equipment) Customers are free to use the bearer as they wish
Resilience Option 2 (RO2) OSA Standard & OSA Single support
Single OSA Bearer Single fibre path No circuit or path protection OSA single has no filters
OSA Standard / OSA Single
Tr Client Tr Client
Tr Client
SITE-A
Tr Client
Client
VS
M
Tr Client
VS
M
Tr
OSA FSP 3000 solution Architecture options
Pre-amplifier
Booster-amplifier
SITE-A SITE-B
Add/Drop Traffic
Add/Drop Traffic
SITE-A SITE-B
Add/Drop Traffic
Add/Drop Traffic
SITE-A SITE-B
Add/Drop Traffic
Add/Drop Traffic
FSP 3000 overview Chassis with modules
7HU chassis example
PSU (redundant)
SCU
NCU-II
OSCM + OSFM
EDFA + DCM
Filters
Transponders
OSA FSP 3000 solution Chassis options
1U Chassis
– Passive − 4 slots (for filters only)
7U
1U
7U Chassis 20 slots
AC or DC PSU – Duplicated
452mmx311mmx270mm (WxHxD)
1U Chassis options AC or DC – Duplicated PSU
• 2 slots
• AC versions needs rear access
1U
OSA OPTIONS
7U Chassis (AC or DC) Supports:
• Standard • R01 • R02
1U Chassis (AC or DC) Supports:
• Single • Standard • RO2
1U Chassis (Passive) Supports
• Standard • RO2
For filter housing only
OSA UPDATES › 1U chassis options
OSA FSP 3000 solution Management
Management Router
Management Router
Up to 20 shelves can be cascaded in one network element
For OSA 3 or 4 max likely
Up to 4 shelves can be cascaded in one OSA network element
Excluding a passive shelf
Network element Control Unit = NCU
Shelf Controller Unit = SCU
NOTE: The SCU kit comes supplied with 90cm and 500cm MM Fibres. If your installation requires more please highlight
Multi mode fibre Cat-5 cable
Key features
CORE modules
WCC / TCC
Application-specific
Certified for dedicated enterprise applications
Pluggable network interfaces
Highly reliable, serial design
FEC, ECC, GFP
Full set of SDH/Sonet and OTH features (PM, (G)-AIS/RDI, TCM)
Single board path protection for network interfaces
Cost optimized
Transparent
Performance optimized
Compliance focused (SDH/Sonet, OTH, RMON features)
ACCESS modules
WCA / TCA
ENTERPRISE modules
WCE / TCE
Supports special storage protocols
Certified and tested within special storage environment
OSA FSP 3000 solution Channel modules - overview
Description
OSA FSP 3000 solution WCC-PCTN-10G-V(LN) ‘Transponder’ (D09526)
Network ports
– Discrete I/F with tuneable laser
− Tuneable DWDM (81ch C-Band, 41ch L-Band)
− Supports all 32 OSA frequencies
– LN version available
− long reach, noise optimized network interface
Client ports
– 1x XFP 1310nm
− 850nm and 1550nm available but not supported for OSA
– OSA Applications
− STM-64, 10 GbE LAN PHY, 10 GbE WAN PHY, 10G FC & OTU2
Forward error correction support (FEC)
– GFEC & EFEC-2 support
Inband management support (embedded control channel ECC)
– GCCx, DCCr/SDCC and proprietary ECC for wrapped 10GbE
Performance monitoring (PM)
– Full set of digital PM and Fault Monitoring options for Physical layer, PCS, 10 GbE layer, SDH/SONET layers, OTN layer, FEC layer, TCM monitoring
– SW loop backs
Dimensions & power consumption
– 1 slot wide
– <30W
WCC-PCTN-10G
TUN
XFP
PCS: physical coding sublayer
OSA FSP 3000 solution 2WCC-PCN-10G ‘Dual Transponder’ (D09531)
Network ports
– 2x XFP (XFP/11G/Dxxxx.xxV/SM/LC#Dxx)
− Supports all 32 OSA frequencies
Client ports
– 2x XFP 1310nm
− 850nm and 1550nm available but not supported for OSA
– OSA Applications
− STM-64 & OTU2
− 10 GbE LAN PHY, 10 GbE WAN PHY & 8G FC
Forward error correction support (FEC)
– GFEC & EFEC-2 support
Inband management support (embedded control channel ECC)
– DCCr (SDCC) and GCCx support on network port
Performance monitoring (PM)
– Full set of digital PM and Fault Monitoring options for Physical layer, PCS, 10 GbE layer, SDH/SONET layers, OTN layer, FEC layer, TCM monitoring
– SW loop backs
Dimensions & power consumption
– 1 slot wide
– <45W
2WCC-PCN-10G
XFP
XFP
XFP
XFP
PCS: physical coding sublayer
Clie
nt-
1 i.
e.
10
Gb
E
Clie
nt-
2 i.
e.
10
Gb
E
1
2
OSA FSP 3000 solution 10TCC-PCTN-4GUS+10G-V(LN) ‘Muxponder’ (D09532)
Network ports
– Discrete I/F with tuneable laser
− Tuneable DWDM (81ch C-Band, 41ch L-Band)
− Supports all 32 OSA frequencies
– LN version available: long reach, noise optimized network
interface
Client ports
– 10x SFP
− 850nm and 1310nm 2.5G & 4G variants
− 1550nm available but not supported for OSA
– OSA Applications
− STM-1, STM-4 & STM-16
− GbE, 1G FC, 2G FC & 4G FC
Forward error correction support (FEC)
– GFEC & EFEC-2 support
Inband management support (embedded control channel ECC)
– GCCx, DCCr/SDCC & DCCm/LDCC
Performance monitoring (PM)
– Full set of digital PM and Fault Monitoring options for
Physical layer, GbE and GFP layer, SDH/SONET/OTN
layers, FEC layer, TCM monitoring
– SW loop backs
Dimensions & power consumption
– 2 slot wide
– <67W
10TCC-PCTN-4GUS+10G
SFP
TUN
SFP
SFP
SFP
SFP
SFP
SFP
SFP
SFP
SFP
VC4 per service
Max services
STM-1 2 10
STM-4 5 10
STM-16 18 3
GbE 7 9
1G FC 6 10
2G FC 12 5
4G FC 24 2
Any mix of the above if the total amount of 64xVC4 is not exceeded
OSA FSP 3000 solution 2TWCC-PCN-2G7U ‘Dual Transponder/Muxponder’ (D09528)
Network ports
– 2x SFP (SFP/2G5U/xxxxU/SM/LC#Dxx)
− Supports all 32 OSA frequencies
Client ports
– 2x SFP 1310nm
− 850nm and 1310nm
– OSA Applications
− STM-16 & OTU-1 in transponder mode
− GbE, 1G FC & 2G FC in Multiplexer mode
Forward error correction support (FEC)
– GFEC
Inband management support (embedded control channel ECC)
– GCC1/GCC2 on client port, DCCr/SDCC, GCC0
Performance monitoring (PM)
– Full set of digital PM and Fault Monitoring options for Physical layer, GbE and GFP layer, SDH/SONET/OTN layers, FEC layer, TCM monitoring
– SW loops back
Dimensions & power consumption
– 1 slot wide
– <30W
2TWCC-PCN-2G7U
SFP
SFP
SF
P
Clie
nt-
1 i.
e.
Gb
E
Clie
nt-
2 i.
e.
Gb
E
1
2TWCC-PCN-2G7U
SFP
SFP
SFP
SFP
C
lien
t-1
i.e.
O
TU-1
Clie
nt-
2 i.
e.
OTU
-1
1
2
OSA FSP 3000 solution WCC-PC1N-2G7U ‘Transponder’ (D09527)
Network ports
– 2x SFP (SFP/2G5U/xxxxU/SM/LC#Dxx)
− Supports all 32 OSA frequencies
Client ports
– 2x SFP
− 850nm and 1310nm
– OSA Applications
− STM-1, STM-4 & STM-16
− GbE & OTU-1
Forward error correction support (FEC)
– GFEC
Inband management support (embedded control channel ECC)
– GCCx and DCCr (SDCC)
Performance monitoring (PM)
– Full set of digital PM and Fault Monitoring options for Physical layer, GbE layer, SDH/SONET/OTN layers, PCS and FEC layers, TCM monitoring
– SW loop backs
Dimensions & power consumption
– 1 slot wide
– <20W
PCS: physical coding sublayer
WCC-PC1N-2G7U
SFP
SF
P
OSA FSP 3000 solution 5TCE-PCTN-10GU+10G ‘Muxponder/SAN card’ (D09534)
Network ports
– Discrete I/F with tuneable laser
− Tuneable DWDM (81ch C-Band, 41ch L-Band)
− Supports all 32 OSA frequencies
– LN version available: long reach, noise optimized network interface
Client ports
– 5x SFP or up to 2x SFP+
− 850nm and 1310nm 2.5G & 4G SFP variants
− 1310nm SFP+ 10G & 8G variants
– OSA Applications
− 1G FC, 2G FC, 4G FC, 8G FC & 10G FC ISC-3
− GbE & 10 GbE LAN PHY (10GbE WAN PHY not supported)
Forward error correction support (FEC)
– GFEC
Inband management support (embedded control channel ECC)
– GCC0 (1312 kbit/s)
Performance monitoring (PM)
– Physical, PCS, FEC, Ethernet Layer
– SW loop backs
– Latency measurement
Dimensions & power consumption
– 1 slot wide
– <42W (Max 13 cards per 7U shelf)
5TCE-PCTN-10GU+10G
SFP
TUN
SFP
SFP
SFP
SFP
› Recommended for:
› SAN - Greater certification
› HPC - Greater certification
5TCE – Features and benefits
Feature Benefit
Tuneable network port Easy sparing concept
Wavelength spectrum: 80ch. (C) + 40ch. (L)
Highest transport capacity
G-FEC on network port Extended distances up to 1200km
Client applications: 1G, 2G, 4G, 8G, 10G FC GbE, 10GE 5G / 10G IB, ISC-3
One card fits all - investment protection
Latency optimized muxing Perfect fit for latency sensitive apps
Constant Bit Rate (CBR) mux mode 100% transparent transport – no interop issues
Dynamic end-to-end latency measurement Easy provisioning of buffer credits
Encryption Highest security transmission
OSA FSP 3000 solution 4TCA-PCN-4GU+4G ‘Muxponder / ADM’ (D09529)
Network ports
– 2x SFP 4G (SFP/4GU/xxxxV/SM/LC#Dxx)
− Supports all 32 OSA frequencies
Client ports
– 4x SFP
− 850nm and 1310nm 2.5G & 4G SFP variants
– OSA Applications
− GbE, 1G FC, 2G FC & 4G FC
– 4 x GbE, 4 x 1G FC, 2 x 2G FC, 1 x 4G FC or mix of services (ADM
mode)
– 4 x GbE, 4 x 1G FC, 4 x 2G FC, 2 x 4G FC or mix of services (Dual mux
mode)
Forward error correction support (FEC)
– None
Inband management support (embedded control channel ECC)
– Proprietary
Performance monitoring (PM)
– Physical Layer, CV, CRC, SE, SES
– SW loop backs
Dimensions & power consumption
– 1 slot wide
– <25W
CV: coding violation CRC: cyclic redundancy check SE: synch header error SES: severely errored seconds
4TCA-PCN-4GU+4G
SFP
SFP
SFP
SFP
SFP
SFP
OSA FSP 3000 solution 4TCA-PCN-4GUS+4G ‘Muxponder / ADM’ (D09530)
Network ports
– 2x SFP 4G (SFP/4GU/xxxxV/SM/LC#Dxx)
− Supports all 32 OSA frequencies
Client ports
– 4x SFP
− 850nm and 1310nm 2.5G
– OSA Applications
− GbE, STM-1 & STM-2
– 4 x GbE, 4 x STM-4, 4 x STM-1 or mix of services
Forward error correction support (FEC)
– None
Inband management support (embedded control channel ECC)
– Proprietary
Performance monitoring (PM)
– Physical Layer, CV, CRC, SE, SES
– SW loop backs
Dimensions & power consumption
– 1 slot wide
– <25W
CV: coding violation CRC: cyclic redundancy check SE: synch header error SES: severely errored seconds
4TCA-PCN-4GUS+4G
SFP
SFP
SFP
SFP
SFP
SFP
OSA FSP 3000 solution 2WCA-PCN-10G ‘Dual Transponder’ (D09533)
Network ports
– 2x XFP (XFP/11G/Dxxxx.xxV/SM/LC#Dxx)
− Supports all 32 OSA frequencies
− 8G XFP used for 8G FC
Client ports
– 2x XFP 1310nm
− 850nm and 1550nm available but not supported for OSA
− 8G XFP used for 8G FC
– OSA Applications (Recommended for ‘low latency’ solutions)
− 4G FC, 8G FC, 10G FC
− 10 GbE LAN, 10 GbE WAN, STM-64 & OTU-2
Forward error correction support (FEC)
– None
Inband management support (embedded control channel ECC)
– None
Performance monitoring (PM)
– Analogue PM and Fault Monitoring for Physical layer
– SW loop backs
Dimensions & power consumption
– 1 slot wide
– <20W
Clie
nt-
1 i.
e.
10
Gb
E
Clie
nt-
2 i.
e.
10
Gb
E
1
2
2WCA-PCN-10G
XFP
XFP
XFP
XFP
OSA FSP 3000 solution OSA Filter options-1
8G
SM
Line
4CSM
SINGLE WAVELENGTH No filters
OSA Single support
OSA RO2 support
4CSM 4CSM
4CSM 4CSM
4CSM 4CSM
4CSM 4CSM
Line Line
FOUR WAVELENGTHS 1 filter OSA Standard support OSA RO1 support OSA RO2 support
32 WAVELENGTHS 2 to 9 filters OSA Standard support OSA R01 support OSA RO2 support
OSA Single OSA Standard OSA Standard (7U Chassis)
OSA FSP 3000 solution OSA upgrades
Installation Modify required
1U Single Upgrade to 1U Standard
1U Single Upgrade 7U Standard
1U Standard Upgrade to 7U Standard
1U Single Upgrade to 1U Single RO2
1U Standard Upgrade to 1U RO2
1U Standard Upgrade to 7U RO1
1U Standard Upgrade to 7U RO2
1U RO2 Upgrade to 7U RO2
7U Standard 7U RO2
7U Standard Upgrade to 7U RO1
Provide greater capacity
Additional shelves and/or
Filters
Add protection
Additional shelves, filters, protection units maybe needed