ADONY METERING PUMP - Nikkiso Eiko METERING PUMP The Best Selection for Injection and Transfer...
Transcript of ADONY METERING PUMP - Nikkiso Eiko METERING PUMP The Best Selection for Injection and Transfer...
ADONY METERING PUMPThe Best Selection for Injection and Transfer
Catalog No.CAP-13017
Notice for the safety operation : To use a pump for safety, be sure to read the instruction manual before your operation.
Product(s) (including parts, technical data or information thereto) described in this catalog shall be subject to export control laws and regulations of Japan or the US. You need to obtain the approval from appropriate government(s) when you export if such laws and regulations require.
We reserve the right to change the contents of this catalog, without prior notice.
NIKKISO EIKO CO.,LTD.Head office & factory 16-2 Noguchicho 2-chome, Higashi-Murayama City, Tokyo 189-0022, JapanTel : 81-42-390-6540 Fax : 81-42-390-6541
Discharge P
ressure
Discharge Capacity
AHA・AHB・AHC・AHD
AH with Electro Servo Unit
ADONY DIAPHRAGM TYPEMETERING PUMP
ADONY PLUNGER TYPEMETERING PUMP
ADONY PULSELESS DIAPHRAGM TYPEMETERING PUMP
Discharge P
ressure
Discharge Capacity
Discharge P
ressure
Discharge Capacity
Discharge P
ressure
Discharge Capacity
AHA・AHB・AHC・AHD
AH with Electro Servo Unit
ADONY DIAPHRAGM TYPEMETERING PUMP
ADONY PLUNGER TYPEMETERING PUMP
ADONY PULSELESS DIAPHRAGM TYPEMETERING PUMP
Discharge P
ressure
Discharge Capacity
Discharge P
ressure
Discharge Capacity
●Max. discharge capacity 54.0 L/min per single head●Wide range of adaptable motors : IEC standard, explosion proof, inverter control etc.
Waste water treatment, pH control Clean water supply plant Chemical Plant Paper manufacturing plant Food process plant Mining/Iron plant Electro plating equipment
"Space-saving", it's a vertical styleWide selection liquid end materialsPVC, Stainless steel, PVDF, PTFE etc...Convenience connection style, Flange (JIS, ANSI, DIN), Hose, Union, Thread, etcSimple structure of "Oil bath style power end"Wide range of discharge capacity 0.035 L/min - 54.0 L/minMultiple head availableMax. discharge pressure ; 1.0 MPa (AHA01-32)Stability discharge accuracy ±2% (repeatability)Discharge capacity control : 25 to 100% stroke length 10 to 100% number of stroke
Feature
Applications
0.18kW‒0.4kWA 0 1
2
48/58
96/11612345678
42(2)42(4)6584120144170210234
B
C
D
0.37/0.4kW0.75/1.5kW
1.5kW
**
Chemical Injection, Transfer, sampling etc.
PVC Flange
Series
Power end size/motor
D’m dia. No. of stroke
Mater ial
D’m head
Remark : 1) Inverter use : AHA41-52 = 0.37/0.4kW, AHC72-82 = 1.5kW 2) *for AHA01-32 PVC head only
P V C : Polyvinyl chloridePVDF: Polyvinylidene fluorideF P M : Fluoro rubberEPDM: Ethylene Propylene RubberPTFE: Polytetrafluoroethylene
Ball Valve Oring/gasket Connection Motor No. of head Option ExtraVoltage 3phasesimplex
duplex2
OriginalAHA,AHB
IEC std.
InvertereG3d2G4Inverterd2G4
NFlange
Union
Hose
Ceramics
Hastlloy-c
(Stroke L)
PVC Union PVC Hose SUS Flange PVDF Flange Original Motor IEC standard
Standard
With elector-servoE
For HighviscosityK
200V20 standard
Special spec.SP220V22
380V38
400V40
440V44
**
Constriction Diaphragm heads style / Electric motor
Series AH Model code
Endless progress of the human&Everlasting harmony with nature
NIKKISO EIKO
ADONY Diaphragm type metering pump Series AH
SYMPLE STANDARD MODELDirect Mechanical Driven Diaphragm type
The vertical mounted motor style is required only small space.
Available wide line-up pumps satisfy various demands of plant for chemical, water supply,
water treatment and others.
AH is designed to satisfy every conditions of field.
Nikkiso Eiko is professional manufacturer of handling many kind of liquids based on long history.
"ADONY METERING PUMP" is designed on our long successful experience of
the field to satisfy pump user's any demands!!
●Max. discharge capacity 54.0 L/min per single head●Wide range of adaptable motors : IEC standard, explosion proof, inverter control etc.
Waste water treatment, pH control Clean water supply plant Chemical Plant Paper manufacturing plant Food process plant Mining/Iron plant Electro plating equipment
"Space-saving", it's a vertical styleWide selection liquid end materialsPVC, Stainless steel, PVDF, PTFE etc...Convenience connection style, Flange (JIS, ANSI, DIN), Hose, Union, Thread, etcSimple structure of "Oil bath style power end"Wide range of discharge capacity 0.035 L/min - 54.0 L/minMultiple head availableMax. discharge pressure ; 1.0 MPa (AHA01-32)Stability discharge accuracy ±2% (repeatability)Discharge capacity control : 25 to 100% stroke length 10 to 100% number of stroke
Feature
Applications
0.18kW‒0.4kWA 0 1
2
48/58
96/11612345678
42(2)42(4)6584120144170210234
B
C
D
0.37/0.4kW0.75/1.5kW
1.5kW
**
Chemical Injection, Transfer, sampling etc.
PVC Flange
Series
Power end size/motor
D’m dia. No. of stroke
Mater ial
D’m head
Remark : 1) Inverter use : AHA41-52 = 0.37/0.4kW, AHC72-82 = 1.5kW 2) *for AHA01-32 PVC head only
P V C : Polyvinyl chloridePVDF: Polyvinylidene fluorideF P M : Fluoro rubberEPDM: Ethylene Propylene RubberPTFE: Polytetrafluoroethylene
Ball Valve Oring/gasket Connection Motor No. of head Option ExtraVoltage 3phasesimplex
duplex2
OriginalAHA,AHB
IEC std.
InvertereG3d2G4Inverterd2G4
NFlange
Union
Hose
Ceramics
Hastlloy-c
(Stroke L)
PVC Union PVC Hose SUS Flange PVDF Flange Original Motor IEC standard
Standard
With elector-servoE
For HighviscosityK
200V20 standard
Special spec.SP220V22
380V38
400V40
440V44
**
Constriction Diaphragm heads style / Electric motor
Series AH Model code
Endless progress of the human&Everlasting harmony with nature
NIKKISO EIKO
ADONY Diaphragm type metering pump Series AH
SYMPLE STANDARD MODELDirect Mechanical Driven Diaphragm type
The vertical mounted motor style is required only small space.
Available wide line-up pumps satisfy various demands of plant for chemical, water supply,
water treatment and others.
AH is designed to satisfy every conditions of field.
Nikkiso Eiko is professional manufacturer of handling many kind of liquids based on long history.
"ADONY METERING PUMP" is designed on our long successful experience of
the field to satisfy pump user's any demands!!
Remark 1) upper : PVC head, lower : Stainless head2) "F" and “*2 are changed against a type of electric motor. 3) These dimensions and weight are based on PVC head pumps and with Japanese typical motor.
■AHD81, 82
■AHA41~52 AHB, AHC
■AHA01~32
■Series AH Capacity-Pressure Selection Table
■Series AH Dimensions
Model D’m dia. Stroke L. MotorConnection
Flange Union HoseNo. of Stroke Max. discharge capacity per head Max. discharge
pressure
■Series AH Liquid end construction
AHA01~22PVC Flange (union) type
AHA01~32Flange type (SUS)
AHA31, 32PVC Flange (union) type
AHA01~22PVC Hose type
AHA31, 32PVC Hose type
Weight(kg)
647
637
605
472
513
477
380
360Flange Union
Hose
Hose
Flange
Flange
Flange
Flange
Flange
Flange
21.0
22.0
23.0
25.0
27.0
28.5
30.0
55.0
60.0
74.0
90.0
Diaphragm HeadDiaphragmBall ValveValve SeatBall GuideGasketBack up plateJointScrewFlange
Diaphragm Head
Material code
Diaphragm headBall valve
O ringCeramics
Ceramics
Ceramics
Ceramics
DiaphragmBall Valve Ceramics Ceramics Ceramics
PVDF/PP
Valve Seat AHA01-22
Ball GuideO Ring GasketBack up plateJointUnion NutUnion socketUnion nut collarFlange
Valve Seat AHA31-32
Gasket
No. Name P・M(S)・T
P・M(S)・E
Material codeMaterial code
SUS316(SUS304)SUS316(SUS304)SUS316(SUS304)
PVDF/PP
Diaphragm HeadDiaphragmBall ValveValve SeatBall GuideO RingLift PieceBack up plateJointFlange
Ceramics SUS316(SUS304)SUS316(SUS304)SUS316(SUS304)
No. NameMaterial codeMaterial code
Model,
,
,
,
,
,
,
,
,
,
,
,
No. NameMaterial codeMaterial code
658 159 151 532 55765A JIS10K81 82AHD
AHD
(133.5) (133.5)
(133.5)
*2*2
100 25
150
260
290
A1
C
B1
200
D
(F)
PF3/4
90
A2
B2 B3
A3
100 25
150
260
290
200
A1
B1
C
(F)
(D)
PF3/4
E1
4-φ10
E2
E3E1
4-φ10
■AHA01~32 ●Flange ●Union ●Hose ■AHA41~52
*2
*2
150 25C
200
200
(D)
A1
B1
PF3/4
260
290
(F)
170C 25
(D)
A1
B1
200
(F)
84
(282)
PF3/4
4-φ12
220
4-φ10
E1
E1
104260290
A1
(D)
200
250
25
90
C
E1
124300350
4-φ12
B1
F
(716)
PF3/4
■AHB ■AHC ■AHD
23422.545.0
27.054.0
8182
Remark 1) upper : PVC head, lower : Stainless head2) "F" and “*2 are changed against a type of electric motor. 3) These dimensions and weight are based on PVC head pumps and with Japanese typical motor.
■AHD81, 82
■AHA41~52 AHB, AHC
■AHA01~32
■Series AH Capacity-Pressure Selection Table
■Series AH Dimensions
Model D’m dia. Stroke L. MotorConnection
Flange Union HoseNo. of Stroke Max. discharge capacity per head Max. discharge
pressure
■Series AH Liquid end construction
AHA01~22PVC Flange (union) type
AHA01~32Flange type (SUS)
AHA31, 32PVC Flange (union) type
AHA01~22PVC Hose type
AHA31, 32PVC Hose type
Weight(kg)
647
637
605
472
513
477
380
360Flange Union
Hose
Hose
Flange
Flange
Flange
Flange
Flange
Flange
21.0
22.0
23.0
25.0
27.0
28.5
30.0
55.0
60.0
74.0
90.0
Diaphragm HeadDiaphragmBall ValveValve SeatBall GuideGasketBack up plateJointScrewFlange
Diaphragm Head
Material code
Diaphragm headBall valve
O ringCeramics
Ceramics
Ceramics
Ceramics
DiaphragmBall Valve Ceramics Ceramics Ceramics
PVDF/PP
Valve Seat AHA01-22
Ball GuideO Ring GasketBack up plateJointUnion NutUnion socketUnion nut collarFlange
Valve Seat AHA31-32
Gasket
No. Name P・M(S)・T
P・M(S)・E
Material codeMaterial code
SUS316(SUS304)SUS316(SUS304)SUS316(SUS304)
PVDF/PP
Diaphragm HeadDiaphragmBall ValveValve SeatBall GuideO RingLift PieceBack up plateJointFlange
Ceramics SUS316(SUS304)SUS316(SUS304)SUS316(SUS304)
No. NameMaterial codeMaterial code
Model,
,
,
,
,
,
,
,
,
,
,
,
No. NameMaterial codeMaterial code
658 159 151 532 55765A JIS10K81 82AHD
AHD
(133.5) (133.5)
(133.5)
*2*2
100 25
150
260
290
A1
C
B1
200
D
(F)
PF3/4
90
A2
B2 B3
A3
100 25
150
260
290
200
A1
B1
C
(F)
(D)
PF3/4
E1
4-φ10
E2
E3E1
4-φ10
■AHA01~32 ●Flange ●Union ●Hose ■AHA41~52
*2
*2
150 25C
200
200
(D)
A1
B1
PF3/4
260
290
(F)
170C 25
(D)
A1
B1
200
(F)
84
(282)
PF3/4
4-φ12
220
4-φ10
E1
E1
104260290
A1
(D)
200
250
25
90
C
E1
124300350
4-φ12
B1
F
(716)
PF3/4
■AHB ■AHC ■AHD
23422.545.0
27.054.0
8182
ADONY METERING PUMPThe Best Selection for Injection and Transfer
Catalog No.CAP-13017
Notice for the safety operation : To use a pump for safety, be sure to read the instruction manual before your operation.
Product(s) (including parts, technical data or information thereto) described in this catalog shall be subject to export control laws and regulations of Japan or the US. You need to obtain the approval from appropriate government(s) when you export if such laws and regulations require.
We reserve the right to change the contents of this catalog, without prior notice.
NIKKISO EIKO CO.,LTD.Head office & factory 16-2 Noguchicho 2-chome, Higashi-Murayama City, Tokyo 189-0022, JapanTel : 81-42-390-6540 Fax : 81-42-390-6541