Adobe® Photoshop® CS5 On Demand
Transcript of Adobe® Photoshop® CS5 On Demand
Que Publishing, 800 East 96th Street, Indianapolis, IN 46240 USA
Steve Johnson
Perspection, Inc.
Adobe®
Photoshop® CS5
Adobe® Photoshop® CS5 On Demand
Copyright © 2010 by Perspection, Inc.
All rights reserved. No part of this book shall be reproduced, stored in aretrieval system, or transmitted by any means, electronic, mechanical, photo-copying, recording, or otherwise, without written permission from the publish-er. No patent liability is assumed with respect to the use of the informationcontained herein. Although every precaution has been taken in the prepara-tion of this book, the publisher and author assume no responsibility for errorsor omissions. Nor is any liability assumed for damages resulting from the useof the information contained herein.
Library of Congress Cataloging-in-Publication Data is on file
ISBN-13: 978-0-7897-4447-0ISBN-10: 0-7897-4447-3
Printed and bound in the United States of America
Que Publishing offers excellent discounts on this book when ordered in quantity for bulk purchases or special sales.
For information, please contact: U.S. Corporate and Government Sales
1-800-382-3419 or [email protected]
For sales outside the U.S., please contact: International Sales
1-317-428-3341 or [email protected]
TrademarksAll terms mentioned in this book that are known to be trademarks or servicemarks have been appropriately capitalized. Que cannot attest to the accuracyof this information. Use of a term in this book should not be regarded asaffecting the validity of any trademark or service mark.
Adobe, the Adobe logo, Acrobat, Bridge, Device Central, Dreamweaver,Extension Manager, Flash, InDesign, Illustrator, PageMaker, Photoshop,Photoshop Elements, and Version Cue are registered trademarks of AdobeSystem Incorporated. Apple, Mac OS, and Macintosh are trademarks of AppleComputer, Inc. Microsoft and the Microsoft Office logo are registered trade-marks of Microsoft Corporation in the United States and/or other countries.
Warning and DisclaimerEvery effort has been made to make this book as complete and as accurate aspossible, but no warranty or fitness is implied. The authors and the publishersshall have neither liability nor responsibility to any person or entity withrespect to any loss or damage arising from the information contained in thisbook.
PublisherPaul Boger
Associate PublisherGreg Wiegand
Acquisitions EditorLaura Norman
Managing EditorSteve Johnson
AuthorSteve Johnson
Technical EditorToni Bennett
Page LayoutBeth TeylerJames Teyler
Interior DesignersSteve JohnsonMarian Hartsough
PhotographsToni BennettTracy Teyler
IndexerKatherine Stimson
ProofreaderBeth Teyler
Team CoordinatorCindy Teeters
Second Printing: February 2011
iii
Acknowledgements
a
aPerspection, Inc.Adobe Photoshop CS5 On Demand has been created by the professional trainersand writers at Perspection, Inc. to the standards you’ve come to expect from Quepublishing. Together, we are pleased to present this training book.
Perspection, Inc. is a software training company committed to providing informationand training to help people use software more effectively in order to communicate,make decisions, and solve problems. Perspection writes and produces softwaretraining books, and develops multimedia and Web-based training. Since 1991, wehave written more than 100 computer books, with several bestsellers to our credit,and sold over 5 million books.
This book incorporates Perspection’s training expertise to ensure that you’ll receivethe maximum return on your time. You’ll focus on the tasks and skills that increaseproductivity while working at your own pace and convenience.
We invite you to visit the Perspection web site at:
www.perspection.com
AcknowledgementsThe task of creating any book requires the talents of many hard-working peoplepulling together to meet impossible deadlines and untold stresses. We’d like tothank the outstanding team responsible for making this book possible: the writer,Steve Johnson; the technical editor, Toni Bennett; the production editors, JamesTeyler and Beth Teyler; proofreader, Beth Teyler; and the indexer, Katherine Stimson.
At Que publishing, we’d like to thank Greg Wiegand and Laura Norman for theopportunity to undertake this project, Cindy Teeters for administrative support, andSandra Schroeder for your production expertise and support.
Perspection
iv
aa
About The AuthorSteve Johnson has written more than 50 books on a variety of computer software,including Adobe Photoshop CS4, Adobe Flash CS4, Adobe Dreamweaver CS4,Adobe InDesign CS4, Adobe Illustrator CS4, Microsoft Windows 7, Microsoft Office2007, Microsoft Office 2008 for the Macintosh, and Apple Mac OS X Snow Leopard.In 1991, after working for Apple Computer and Microsoft, Steve founded Perspec-tion, Inc., which writes and produces software training. When he is not staying uplate writing, he enjoys playing golf, gardening, and spending time with his wife,Holly, and three children, JP, Brett, and Hannah. Steve and his family live inPleasanton, California, but can also be found visiting family all over the westernUnited States.
Acknowledgements v
a
We Want To Hear From You!As the reader of this book, you are our most important critic and commentator. Wevalue your opinion and want to know what we’re doing right, what we could do bet-ter, what areas you’d like to see us publish in, and any other words of wisdom you’re willing to pass our way.
As an associate publisher for Que, I welcome your comments. You can email orwrite me directly to let me know what you did or didn’t like about this book—as wellas what we can do to make our books better.
Please note that I cannot help you with technical problems related to the topic of this book. We do have a User Services group, however, where I will forwardspecific technical questions related to the book.
When you write, please be sure to include this book’s title and author as well asyour name, email address, and phone number. I will carefully review your com-ments and share them with the author and editors who worked on the book.
Email: [email protected]
Mail: Greg WiegandQue Publishing800 East 96th StreetIndianapolis, IN 46240 USA
For more information about this book or another Que title, visit our Web site atquepublishing.com/register. Type the ISBN (excluding hyphens) or the title of a bookin the Search field to find the page you’re looking for.
This page intentionally left blank
vii
Contents
c
cIntroduction xix
Getting Started with Photoshop CS5 1
Installing Photoshop 2 New!
Starting Photoshop 4Viewing the Photoshop Window 6Showing and Hiding Panels 7Working with Panels 8Working with Photoshop Tools 10 New!
Creating a New Document 12Selecting Color Modes and Resolution 13Creating a New Document Using Presets 14Working with Non-Square Pixels 15Opening Images 16 New!
Inserting Images in a Document 17Importing Raw Data from a Digital Camera 18 New!
Working with Smart Objects 20Changing Image Size and Resolution 22Checking for Updates and Patches 24 New!
Getting Help While You Work 26 New!
Saving a Document 28 New!
Using the Status Bar 30Closing a Document 31 New!
Finishing Up 32
Understanding Navigation and Measurement Systems 33
Changing the View Size with the Navigator Panel 34Changing the View Area with the Navigator Panel 35Changing the Color of the Navigator Panel View Box 36Changing the Screen Display Mode 37Changing the View with the Zoom Tool 38Increasing or Decreasing Magnification 40 New!
2
1
viii
c
Moving Images in the Document Window 41Working with Multiple Documents 42Working with One Image in Multiple Windows 43Moving Layers Between Two Open Documents 44Creating Notes 45Working with the Info Panel 46Changing How the Info Panel Measures Color 47Working with Rulers 48 New!
Creating Tool Presets 50
Customizing the Way You Work 51
Optimizing Photoshop 52 New!
Setting General Preferences 54 New!
Modifying File Handling Preferences 56 New!
Working with Interface Preferences 58 New!
Working with Cursors Preferences 59 New!
Controlling Transparency & Gamut Preferences 60Working with Units & Rulers 62Working with Guides, Grid & Slices 64Selecting Plug-Ins 66Selecting Scratch Disks 67Allocating Memory & Image Cache 68 New!
Working with Type 70Managing Libraries with the Preset Manager 71Using and Customizing Workspaces 72 New!
Building Specialized Workspaces 74 New!
Creating a Customized User Interface 75Defining Shortcut Keys 76
Mastering the Art of Selection 77
Using the Rectangular Marquee Tool 78Using the Elliptical Marquee Tool 79Using the Single Row and Single Column Marquee Tools 80Using the Lasso Marquee Tool 81Using the Magnetic Lasso Tool 82Using the Polygonal Lasso Tool 84Using the Quick Selection Tool 85Using the Magic Wand Tool 86 Selecting by Color Range 87Refining a Selection Edge 88 New!
4
3
Contents ix
c
Adding and Subtracting a Selection 90Cropping a Selection 91 New!
Using Channels to Create and Store Selections 92Modifying an Existing Selection 94Copying and Pasting a Selection 95 New!
Using Free Transform and Transform 96Using the Puppet Warp 98 New!
Using Content-Aware Scaling 99Using Content-Aware Fill 100 New!
Working with Layers 103
Understanding the Layers Panel 104Defining Layer Designations and Attributes 105Creating a New Layer 106 New!
Selecting Layers 108Creating a Layer Group 109 New!
Creating a Selection from a Layer 110 New!
Creating a Layer from a Selection 111 New!
Converting a Background into a Layer 112Controlling Image Information Using the Layers Panel 114Moving Layers Between Documents 115Using Merge Layer Options 116Linking and Unlinking Layers 117Working with Layer Blending Modes 118Setting Layer Opacity 119 New!
Duplicating a Layer 120Deleting Layers 121 New!
Changing Layer Properties 122Working with the Layer Comps Panel 123Exporting Layers as Files 124Setting Layers Panel Options 125 New!
Using Smart Guides 126
Working with the History Panel 127
Setting History Panel Options 128Working with Linear and Non-Linear History 130Controlling the Creative Process with Snapshots 132Duplicating a History State in Another Document 133Saving the History State of a Document 134Reviewing the History State Text File 135
6
5
x
c
Combining the History Brush with a History State 136 New!
Using the Art History Brush 138 New!
Changing the Eraser Tool into the History Brush 139Controlling History States 140
Working with Adjustment Layers, Filters, and Tools 141
Creating an Adjustment Layer 142 New!
Modifying an Adjustment Layer 143Merging Adjustment Layers 144Creating a Temporary Composite Image 145Controlling Adjustment Layers with Clipping Groups 146Deleting an Adjustment Layer 147Using Blending Modes and Opacity with Layers 148 New!
Using Masks with Adjustment Layers 150Creating Masks with Selections 151Using the Add Noise Filter 152Using the Reduce Noise Filter 153Keeping Proper Perspective with Vanishing Point 154Working with the Lens Correction Filter 156 New!
Using the Box, Surface, and Shape Blur Filters 158Using the Gaussian Blur and Despeckle Filters 160Using the Unsharp Mask Filter 161Using the Smart Sharpen Filter 162 New!
Using Sharpen, Blur and Smudge Tools 164 New!
Setting Up Multiple Clone Sources 165 New!
Using the Clone Stamp Tool 166Using the Dodge and Burn Tools 167Using the Healing Brush and Patch Tools 168Working with the Spot Healing Brush 170Working with the Red Eye Tool 171Controlling Tonal Range 172Working with the Histogram Panel 174
Understanding Colors and Channels 175
Working with 8-, 16-, and 32-Bit Images 176Working with the Channels Panel 178Working with Color Modes 179Understanding the RGB Color Mode 180Understanding the CMYK Color Mode 181Understanding the Grayscale Color Mode 182
8
7
Contents xi
c
Understanding the Bitmap Color Mode 183Understanding the Indexed Color Mode 184Understanding the Lab Color Mode 186Understanding the Duotone Color Mode 187Using the Multichannel Color Mode 188Using the Replace Color Adjustment 189Working with the Color Panel 190Working with the Swatches Panel 192Using the Stroke and Fill Commands 194 New!
Creating Spot Color Channels 196Using the Auto Contrast and Auto Color Commands 197Using Levels Adjustment Commands 198Using the Exposure Adjustment 199Using Curves and Color Adjustments 200Adjusting Hue and Saturation 202Using the Match Color Adjustment 203Using the Selective Color Adjustment 204Using the Channel Mixer Adjustment 205Using the Gradient Map Adjustment 206Using the Photo Filter Adjustment 207Using the Invert and Equalize Commands 208Using the Threshold and Posterize Adjustments 209Using the HDR Toning Adjustment 210 New!
Using the Shadows/Highlights Adjustment 212Using the Black & White Adjustment 213
Using the Paint, Shape Drawing, and Eraser Tools 215
Understanding Foreground and Background Colors 216Using the Brush and Brush Presets Panel 218 New!
Modifying the Brush Presets Panel 219 New!
Selecting Brush Tip Sets 220 New!
Adjusting Brush Tips 221Adjusting Bristle Brush Tips 222 New!
Creating Customized Brush Tips 223Saving Customized Brush Tips 224Working with the Brush and Airbrush Tools 225Working with the Brush Mixed Tool 226 New!
Working with the Pencil Tool 227Working with Auto Erase 228Working with the Line Tool 229
9
xii
c
Using the Standard Shape Tool 230Working with the Custom Shape Tool 232Creating a Custom Shape 233Saving Custom Shape Sets 234Using the Paint Bucket Tool 235Working with the Eraser Tools 236Working with the Magic Eraser Tool 238Creating and Applying Gradients 239 New!
Creating and Saving Customized Gradients 240 New!
Using the Color Replacement Tool 242
Creating Masks 243
Understanding Layer and Vector Masks 244Creating a Layer Mask 245Using Paint Tools with Layer Masks 246 New!
Using Selections to Generate Complex Layer Masks 247Using Layer Masks to Generate Soft Transparency 248Creating Unique Layer Mask Effects 249Creating a Vector Mask 250Modifying Layer and Vector Masks 251Creating Channel Masks 252Creating Channel Masks from Scratch 253Modifying Channel Mask Options 254Creating Channel Masks from Selections 255Making Channel Masks from Native Color Channels 256Loading Channel Masks 258Moving Channel Masks Between Documents 260Combining Channel Masks 261Using the Quick Mask Mode 262Working with Quick Mask Options 263Modifying Selections with Quick Mask Mode 264
Using the Paths Panel 265
Understanding Vector and Raster Images 266Converting a Selection into a Path 267Working with Pen Tools 268Creating Paths Using the Freeform Pen Tool 270Using the Magnetic Option with the Freeform Pen Tool 271Adding and Deleting Anchor Points 272Modifying Anchor Points 274Modifying Existing Direction Lines 276
11
10
Contents xiii
c
Converting Straight Points and Curved Points 277Working with Clipping Paths 278Filling an Area of an Image Using Paths 280Stroking an Area of an Image Using Paths 281Creating Shapes as Paths 282Exporting Paths to Adobe Illustrator 283Exporting Paths Using the Export Method 284
Working with Layer Styles 285
Understanding Layer Styles 286Adding a Layer Style 287 New!
Creating and Modifying a Drop Shadow 288Working with Bevel and Emboss 290 New!
Working with Contour and Texture 292Applying a Color Overlay 294 New!
Using the Stroke Layer Style 295 New!
Using Pattern Overlays 296 New!
Working with Outer Glow and Inner Shadow 298 New!
Applying an Inner Glow Style 300 New!
Creating Customized Layer Styles 302Creating Customized Styles Using the Styles Panel 304Moving Existing Layer Styles 306
Getting Creative with Type 307
Using Standard Type Tools 308Working with Type Options 310Working with the Character Panel 312Working with the Paragraph Panel 314Setting Anti-aliasing Options 315Using the Warp Text Option 316Using Spell Check 318Finding and Replacing Text 319Using the Rasterize Type Command 320Creating Work Paths and Shapes from Type Layers 321Creating Shape Layers 322Creating a Type Mask 323Isolating Image Pixels Using a Type Mask 324Creating Chiseled Type with a Type Mask 326Using Masks to Generate Special Effects 328Creating and Modifying Text on a Path 330
13
12
xiv
c
Manipulating Images with Filters 331
Working with the Filter Gallery 332Creating and Working with Smart Filters 334Applying Multiple Filters to an Image 335Modifying Images with Liquify 336Working with Liquify Tool Options 338Working with Liquify Mask Options 340Working with Liquify View Options 341Creating a Liquify Mesh 342Applying a Liquify Mesh 343Using the Lens Blur Filter 344Working with Photo Filters 346Blending Modes and Filter Effects 347Building Custom Patterns 348Using the Fade Command 350Controlling Filters Using Selections 351Using a Channel Mask to Control Filter Effects 352Protecting Images with Watermarks 354Viewing Various Filter Effects 356
Automating Your Work with Actions 359
Examining the Actions Panel 360 New!
Building a New Action 362Recording an Action 363Adding a Stop to an Action 364Controlling the Playback of a Command 365Adding a Command to an Action 366Deleting a Command from an Action 367Working with Modal Controls in an Action 368Changing the Order of Commands in an Action 369Copying an Action 370Running an Action Inside an Action 371Saving Actions into Sets 372Saving Actions as Files 373Moving and Copying Actions Between Sets 374Inserting a Non-Recordable Command into an Action 375Using Enhanced Scripting 376Enhancing the Process with Droplets 378Using a Droplet 380
15
14
Contents xv
c
Controlling Image Output 381
Setting Document Print Options 382 New!
Setting Print Output Options 384Printing a Document in Macintosh 386Printing a Document in Windows 388Changing Printer Settings 389 New!
Printing One Copy 390 New!
Understanding File Formats 391Saving a Document with a Different File Format 392Inserting File Information into a Document 394Understanding File Compression 396Preparing Clip Art for the Web 398Preparing a Photograph for the Web 400 New!
Preparing an Image for the Press 402Preparing an Image for an Inkjet or Laser Printer 404Understanding Monitor, Image, and Device Resolution 406
Working with Automate Commands 407
Working with Batch File Processing 408Working with Conditional Mode Change 410Using the Crop and Straighten Photos Command 411Converting a Multi-Page PDF to PSD 412Creating a PDF Document 414Using Photomerge 416Merging Images to HDR 418 New!
Processing Multiple Image Files 420Using the Fit Image Command 422
Managing Color from Monitor to Print 423
Producing Consistent Color 424Calibrating Using Hardware and Software 425Setting Up Soft-Proof Colors 426Changing from Additive (RGB) to Subtractive (CMYK) 428Working with Rendering Intents 429Printing a Hard Proof 430 New!
Working with Color Management 432Embedding ICC Color Profiles 434Assigning a Different Profile to a Document 435Converting the Color Space to Another Profile 436
18
17
16
xvi
c
Using Hue/Saturation for Out-Of-Gamut Colors 438Using the Sponge Tool for Out-Of-Gamut Colors 440Working with the Out-Of-Gamut Warning 442
Designing for the Web and Devices 443
Saving for the Web 444Working with Save For Web Options 446Optimizing an Image to File Size 447Working with Web File Formats 448Optimizing a JPEG Document 450Optimizing a GIF Document 452Optimizing a PNG-8 Document 454Optimizing a PNG-24 Document 456Optimizing a WBMP Document 457Creating an Animated GIF 458 Working with Animation 460Slicing Images the Easy Way 462Working with Slices 464Arranging Slices 466Saving a Sliced Image for the Web 468Adding HTML Text or an URL Link to a Slice 470Defining and Editing Web Data Variables 472Exporting Directly to Video 474Exporting an Image to Zoomify 476
Extending Photoshop 477
Counting Objects in an Image 478Taking Measurements in an Image 480Aligning and Combining Layers 482Opening Video Files and Image Sequences 484Creating a Video Layer 485Modifying a Video Layer 486Splitting a Video Layer 488Cloning Video Layer Content 489Setting 3D Preferences 490 New!
Creating 3D Models 492 New!
Creating 3D Models Using Repoussé 494 New!
Creating 3D Models Using Preset Shapes 496Changing Render Settings 497
20
19
Contents xvii
c
Modifying 3D Models 498 New!
Browsing 3D Content 500 New!
Working Together with Adobe Programs 501
Exploring Adobe Programs 502 New!
Exploring Adobe Bridge 503Getting Started with Adobe Bridge 504Getting Photos from a Digital Camera 505Working with Raw Images from a Digital Camera 506 New!
Working with Images Using Adobe Bridge 508Applying Image Adjustments 510Creating a Web Photo Gallery 511Automating Tasks in Adobe Bridge 512Using Mini Bridge 513 New!
Exploring CS Live Services 514 New!
Sharing My Screen 515 New!
Reviewing CS Documents 516 New!
Exploring Adobe Device Central 518Checking Content Using Adobe Device Central 519Using Adobe Extension Manager 520
New Features 521 New!
Adobe Certified Expert 525Index 531
21
This page intentionally left blank
xix
Introduction
Welcome to Adobe Photoshop CS5 On Demand, a visualquick reference book that shows you how to work efficientlywith Photoshop. This book provides complete coverage ofbasic to advanced Photoshop skills.
How This Book WorksYou don’t have to read this book in any particular order.We’ve designed the book so that you can jump in, get theinformation you need, and jump out. However, the book doesfollow a logical progression from simple tasks to more com-plex ones. Each task is presented on no more than two facingpages, which lets you focus on a single task without havingto turn the page. To find the information that you need, justlook up the task in the table of contents or index, and turn tothe page listed. Read the task introduction, follow the step-by-step instructions in the left column along with screen illus-trations in the right column, and you’re done.
What’s NewIf you’re searching for what’s new in Photoshop CS5, just lookfor the icon: New!. The new icon appears in the table of contents and throughout this book so you can quickly andeasily identify a new or improved feature in Photoshop. Acomplete description of each new feature appears in the NewFeatures guide in the back of this book.
Keyboard ShortcutsMost menu commands have a keyboard equivalent, such asCtrl+P (Win) or A+P (Mac), as a quicker alternative to usingthe mouse. A complete list of keyboard shortcuts is availableon the Web at www.perspection.com.
How You’ll Learn
How This Book Works
What’s New
Keyboard Shortcuts
Step-by-Step Instructions
Real World Examples
Workshops
Adobe Certified Expert
Get More on the Web
xx
Step-by-StepInstructionsThis book provides concise step-by-step instructions that show you“how” to accomplish a task. Eachset of instructions includes illus-trations that directly correspond tothe easy-to-read steps. Alsoincluded in the text are time-savers, tables, and sidebars tohelp you work more efficiently orto teach you more in-depth infor-mation. A “Did You Know?” pro-vides tips and techniques to helpyou work smarter, while a “SeeAlso” leads you to other parts ofthe book containing related infor-mation about the task.
Real World ExamplesThis book uses real world exam-ples files to give you a context inwhich to use the task. By usingthe example files, you won’t wastetime looking for or creating sam-ple files. You get a start file and aresult file, so you can compareyour work. Not every topic needsan example file, such as changingoptions, so we provide a completelist of the example files usedthrough out the book. The exam-ple files that you need for projecttasks along with a complete filelist are available on the Web atwww.perspection.com.
Real worldexamples helpyou apply whatyou’ve learnedto other tasks.
Illustrationsmatch thenumberedsteps.
Numberedsteps guideyou througheach task.
Did You Know? alertsyou to tips, techniquesand related information.
See Also points you torelated information inthe book.
Easy-to-followintroductionsfocus on asingle concept.
The Workshopswalk you throughin-depth projectsto help you putPhotoshop towork.
Introduction xxi
WorkshopsThis book shows you how to puttogether the individual step-by-step tasks into in-depth projectswith the Workshop. You start eachproject with a sample file, workthrough the steps, and then com-pare your results with projectresults file at the end. The Work-shop projects and associated filesare available on the Web atwww.perspection.com.
Adobe Certified ExpertThis book prepares you fully forthe Adobe Certified Expert (ACE)exam for Adobe Photoshop CS5.Each Adobe Certified Expert certifi-cation level has a set of objec-tives, which are organized intobroader skill sets. To prepare forthe certification exam, you shouldreview and perform each taskidentified with an ACE objective toconfirm that you can meet therequirements for the exam. Infor-mation about the ACE program isavailable in the back of this book.The Adobe Certified Expert objec-tives and the specific pages thatcover them are available on theWeb at www.perspection.com.
xxii
Get More on the WebIn addition to the information inthis book, you can also get moreinformation on the Web to helpyou get up to speed faster withPhotoshop CS5. Some of theinformation includes:
Transition Helpers◆ Only New Features.
Download and print the newfeature tasks as a quick andeasy guide.
Productivity Tools◆ Keyboard Shortcuts.
Download a list of keyboardshortcuts to learn faster waysto get the job done.
More Content◆ Photographs. Download
photographs and othergraphics to use in yourPhotoshop documents.
◆ More Content. Downloadnew content developed afterpublication.
You can access these additionalresources on the Web atwww.queondemand.com orwww.perspection.com.
Additionalcontentis availableon the Web.
Using the Paint, ShapeDrawing, and Eraser Tools
Introduction
Adobe Photoshop supplies you with all types of adjustmentand manipulation tools. In addition to image enhancement,Photoshop can also be a powerful application for designingfrom scratch. With the vast array of supplied brushes, tips,and shape drawing tools, Photoshop helps you produce anyimages, either enhanced or developed from scratch, that youmight need for virtually any conceivable project.
Brushes come in all sizes and shapes, and can be con-trolled with a mouse or drawing tablet. Since the shape ofthe tip controls brush strokes, Photoshop gives you access toseveral sets of predefined brush tip shapes, or you can createyour own customized sets. As for shape drawing tools,Photoshop doesn't limit your creativity to just drawing circlesand squares; it gives you instant access to dozens of prede-fined shapes. You can even create and save your own customshapes. When it comes to Photoshop's paint and drawingtools, your choices are limitless, based only on your knowl-edge of the available tools, and a creative imagination—themore you know, the more you can do with Photoshop.
And, when all the drawing is said and done, there will bea need for cleaning up. With the various Eraser tools thatPhotoshop provides, you can make quick work of touching upthose small problem areas. Photoshop provides regulareraser tools, eraser tools that erase to a definable edge, andeven eraser tools that target specific color values.
When enhancing an image, you might want to apply agradient. Gradients can be something as simple as black andwhite, or as complex as one that contains the colors of therainbow. Gradients can be applied to an image by completelycovering the original image information, or they can be con-trolled through targeted selection, and creative uses of blend-ing modes.
9
9What You’ll Do
Understand Foreground andBackground Colors
Use the Brush and Brush Presets Panel
Modify the Brush Presets Panel
Select Brush Tip Sets
Adjust Brush Tips
Create and Save Customized Brush Tips
Work with the Brush, Airbrush, MixedBrush, and Pencil Tools
Work with Auto Erase
Work with the Line and Standard Shape Tools
Work with the Custom Shape Tool
Create and Save Custom Shape Sets
Use the Paint Bucket Tool
Work with the Eraser Tools
Work with the Magic Eraser Tool
Create and Apply Gradients
Create and Save Customized Gradients
Use the Color Replacement Tool
215
216 Chapter 9
The Foreground and Background colors, located near the bottom of thetoolbox, are Photoshop's way of identifying your primary painting color,as well as the color Photoshop uses in conjunction with theBackground layer. When you select any of Photoshop's painting ordrawing tools, the color applied to the document will be the foregroundcolor—that's its purpose. Hence, it's sometimes referred to asPhotoshop's active color. The Background color serves several func-tions—its primary purpose is to instruct Photoshop how to handle eras-ing on the Background layer. When you use an eraser tool on aPhotoshop layer, by default, the pixels are converted to transparency.However, when you use an eraser tool on the Background, somethingdifferent happens. Since the Background does not support trans-parency, it replaces the erased pixels with the current backgroundcolor.
UnderstandingForeground andBackground Colors
Change the Active Foregroundand Background Colors
Use any of the following methods tochange the active foreground orbackground colors:
◆ Select the Eyedropper tool on thetoolbox, and then click anywherein the active document to changethe foreground color.
Hold down the Alt (Win) or Option(Mac) key, and then click tochange the background color.
◆ Click on a color swatch in theSwatches panel to change theforeground color.
Hold down the Ctrl (Win) or A(Mac) key, and then click tochange the background color.
◆ Click the Foreground orBackground thumbnail to choosethe color's destination. Create acolor in the Color panel.
◆ Click the Foreground orBackground Color box to open theColor Picker dialog box, select acolor or enter color values, andthen click OK.
Eyedroppertool
Color Picker dialog box
Color panel
Swatches panel
Background
Foreground
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 217
Use Default and Switch theForeground and Background Colors
Click the Default Foreground andBackground Colors button torevert the foreground andbackground colors to their defaultvalues of black and white.
Click the Switch Foreground andBackground Colors button toswitch current colors.
TIMESAVER Press D tochange the foreground andbackground colors to their defaultvalues of black and white, andpress X to switch the currentcolors.
2
1
2
1
Did You Know?You can add colors from the ColorPicker to the Swatches panel. Openthe Color Picker dialog box, select thecolor you want to add to the Swatchespanel, click Add To Swatches, type aname for the color, and then click OK.
Selecting Colors
In Windows, you can use the Color dialog box, which displays basicand custom color squares and a color matrix with the full range ofcolors in the color spectrum, to help you select a color. You can enterRGB values for hue, saturation, and luminosity (also known as bright-ness) to specify a color. Hue is a pure color (one without tint orshade); the name of the color (red, green, etc.) is measured by itslocation on the color wheel. Saturation is a measure of how muchwhite is mixed in with the color. A fully saturated color has vividtones; a less saturated color is more of a washed-out pastel.Luminosity is a measure of how much black is mixed with the color. A very bright color contains little or no black. You can also changethe hue by moving the pointer in the color matrix box horizontally; youcan change the saturation by moving the pointer vertically, and theluminosity by adjusting the slider to the right of the color matrix box.On the Macintosh, you click one of the color modes and select acolor, using its controls. You can select RGB values by selecting thecolor sliders at the top of the dialog box, then choosing RGB Slidersfrom the pop-up menu, and dragging the Red, Green, and Blue slid-ers. Or, you can enter values (color numbers) to select a color. Youcan select hue, saturation, and brightness (or luminosity) values byselecting Color Sliders, choosing HSB Sliders, then dragging the slid-ers or entering your own values.
For Your Information
218 Chapter 9
Photoshop's Brushes Panel in CS4 has beensplit into two panels (New!)—Brush and BrushPresets—in CS5. The Brush panel allows youto create and select individual brushes, whilethe Brush Presets panel allows you to selectand use predefined or custom brush tip setsor individual brushes. In the Brush panel, thecurrent painting engine configuration, withoptions such as Shape Dynamics, Scattering,Texture, Dual Brush, and Color Dynamics,gives you control over brushes in ways thatonce were only available in programs likeAdobe Illustrator.
To use the Brush or Brush Presets panel,you first need to select a brush tool, or a toolthat requires the use of a brush, such as theEraser tool, chosen from the toolbox, andthen display the Brush or Brush Presets panel.You can click the Window menu, and thenchoose Brush or Brush Presets to display thepanel. You can also click Brush Panel button(New!) on the Control panel (with a brush toolselected) or Brush Presets panel, or click theBrush Presets button on the Brush panel. Thebrush engine has been improved for quickerresponse, especially with a graphics tablet.
Using the Brush and Brush Presets Panels
Brush panel
Selected brushPainting engineoptions
Brush tip thumbnails Brush Options button
Brush Presets panel
Preset brush tips
Brush Panel button
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 219
The Brush Presets panel (New!) comes in many forms; you can viewbrushes as strokes, or you can choose thumbnails, or even textdescriptions. The form of the Brush Presets panel does not impact itsperformance, only how you view the available brush tips. Choose theversion that best suits your current design needs, and then change theview as needed. When you select a brush, it becomes the default forthat tool only. This gives you the ability to choose a default brush foreach of the brush-specific tools.
Modifying the BrushPresets Panel
Change the Brush Presets Panel View
Select a Brush tool on the toolbox,and then select the Brush Presetspanel.
Click the Brush Presets Optionsbutton, and then select from theavailable View options:
◆ Expanded View. Select to gainaccess to painting engineoptions: Brush Tips, ShapeDynamics, Scattering, Texture,Dual Brush, Color Dynamics,and Other Dynamics.
◆ Text Only. Select to display allbrush tips by their names.
◆ Small Thumbnail. Select todisplay all brush tips using asmall thumbnail.
◆ Large Thumbnail. Select todisplay all brush tips using alarge thumbnail.
◆ Small List. Select to display allbrush tips by their names andsmall thumbnail.
◆ Large List. Select to display allbrush tips by their names andlarge thumbnail.
◆ Stroke Thumbnail. Select todisplay all brush tips with astroke. (This is useful indetermining how the brush willlook when applied in thedocument.)
2
1
StrokeThumbnailview
2
1
TextOnlyview
SmallListview
220 Chapter 9
The Brush Preset panel (New!) comes with a wide variety of prede-fined brush tip sets, including natural bristle (New!), faux finish, andspecial effect brushes. Each set organizes specific brush tips by name.Since other Photoshop tools also use brush tips, it's important to havethe right tool (brush tip) for the right job. Using or making do with thewrong brush tip is akin to digging a swimming pool with a teaspoon.You wouldn't paint a portrait with a house-painting brush, so don't set-tle for anything less than the exact brush tip you need to get the jobdone.
Selecting Brush Tip Sets
Select Brush Tip Sets
Select a Brush tool on the toolbox,and then select the Brush Presetspanel.
Click the Brush Presets Optionsbutton.
Click any of the predefined brushsets.
Click OK.
This replaces the current brushtips with the selected set, or youcan click Append to add them tothe current set.
4
3
2
1
3
Did You Know?You can draw straight lines usingPhotoshop's brush tools. Holding theShift key while dragging constrains thebrush to a 90-degree line. To draw astraight line between two points, clickonce in the document window, movethe mouse to another position, holddown the Shift key, and then click asecond time. A straight line will bedrawn between the first and secondmouse clicks.
21
4
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 221
The left pane of the Brush panel provides a series of controls that letyou define how a brush tip is applied to the active image. Features suchas Brush Tip Shape, Scattering and Color Dynamics let you further cus-tomize your brush tips so you can create that specialized brush for allyour image enhancement needs.
Adjusting Brush Tips
Adjust a Brush Tip
Select a Brush tool on the toolbox,and then select the Brush panel.
Click the Brush Options button,and then click Expanded View.
Click to select a specific brush tip.
Select from the various PaintingEngine options:
◆ Brush Tip Shape. Lets youmodify the size, angle,roundness, hardness, andspacing of the brush tip. Inaddition, you can flip the brushshape along its x (left to right),or y (top to bottom) axis.
◆ Shape Dynamics. Lets yourandomly (jitter) generatedifferent sizes, angles, androundness for the brush tip.
◆ Scattering. Lets you randomlyscatter the shape. Optionsinclude the ability to distribute(Scatter) the shape, as youdraw, choose how many to use(Count), and randomly changethe number (Count Jitter), asyou draw.
◆ Texture. Lets you select apredefined or custom texture,in place of a solid color.
◆ Dual Brush. Lets you select asecond brush.
◆ Color Dynamics. Lets you keyoff of the active foreground andbackground colors.
◆ Other Dynamics. See Table.
4
3
2
1
Dynamic Purpose
Noise Generates random noise in the brush tipas you draw.
Wet Edges Fades the edges of the drawn shape, similar to running a watercolor brush over a wet canvas.
Airbrush Changes the Brush tool into an Airbrush.
Smoothing Applies anti-aliasing to the drawn shapes, creating a smoother shape.
Protect Texture Preserves texture pattern when apply-ing brush presets.
4
Preview boxshows brush tipsettings
Other Dynamics
3
Brush Tip Shapeoptions
222 Chapter 9
Preview boxshows brush tipsettings
2
Adjusting BristleBrush Tips
Adjust a Bristle Brush Tip
Select a Brush tool on the toolbox,and then select the Brush panel.
Click to select a bristle brush tip.
To show or hide the bristle brushpreview, click the Toggle theBristle Brush Preview button onthe panel.
Select from the various bristleoptions:
◆ Shape. Lets you select a bristlebrush shape, such as Round orFlat (Point, Blunt, Curve, Angle,or Fan).
◆ Bristles. Lets you modify thedensity of the bristle between1% and 100%. The density isthe number of bristles in aspecified area of the brushneck.
◆ Length. Lets you modify thelength of the bristle between25% and 500%.
◆ Thickness. Lets you modify thethickness of the bristle fromfine to coarse between 1% and200%.
◆ Stiffness. Specify the rigidnessof the bristle between 1% to100%. A lower value createsflexible bristles, while a highervalue creates stiffer bristles.
◆ Angle. Lets you modify theangle of the brush.
4
3
2
1
Bristle brushes (New!) simulate the effects of painting with a naturalbrush, such as watercolors and oils. When you use a bristle brush, itpaints with vectors to resemble a natural brush stroke. When you selecta bristle brush, you can set brush options, such as brush shape (either,round or flat), brush size, length, density, thickness, and stiffness. If youwant to see a visual representation of your changes, use the Toggle theBristle Brush Preview button (New!) on the panel. When you use awriting tablet and 6D pen, such as a Wacom Art Pen, with a bristlebrush, the pen responds to pressure, bearing, rotation, and tilt.
Open Preset Manager button 3
4
1
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 223
Although Photoshop's Brush panel gives you many choices for brushtips, any good designer will tell you that no matter how many brush tipsyou have, you'll always want more. For example, you're working on a100-year-old photograph, and you need a specific brush to add hairdetails to the blown-out areas of the image. You'll want to find a specialtype of brush that literally creates the illusion of wavy hair and add it toyour collection of brush tips. Photoshop, in an effort to help keep youorganized, gives you the ability to create your very own customizedbrush tips, and then save them later in organized sets.
Creating CustomizedBrush Tips
Create a New Brush Tip
Open an image, scan an item, orselect any of Photoshop's paintingtools and create a shape for a newbrush tip.
IMPORTANT Since the color ofa brush is determined when thebrush tip is selected, create thebrush tip using black or shades ofgray.
Select the brush tip using any ofPhotoshop's selection tools.
IMPORTANT Photoshop picksup any pixel information in theunderlying layers, even white. Ifyou want the brush to have atransparent background, makesure the areas surrounding theimage are transparent.
Click the Edit menu, and then clickDefine Brush Preset.
Enter a name for the new brushpreset.
Click OK.
Open the Brush panel, and thenscroll to the bottom of the list toaccess your newly created brushtip.
Since the Define Brush Presetbutton picks up any backgroundcolors within the selection area, italways creates the brush tip in ablank layer.
5
4
3
2
1 21
4
5
Layer with new brush tip
224 Chapter 9
Once a brush tip is created, it becomes part of the current set.However, the brush has not yet been permanently saved in Photoshop.Although the new brush tip will reappear every time you access theBrush panel, if you choose the option to reset the panel, the new brushwill be lost. To keep brushes you must save them into customized sets;choose the default Brushes folder, so Photoshop can use them.
Saving CustomizedBrush Tips
Save a Customized Brush Tip
Select a Brush tool on the toolbox,and then select the Brush Presetspanel.
Create a set of customizedbrushes.
Click the Brush Presets Optionsbutton, and then click SaveBrushes.
Type the name of the set (with aABR extension).
Click the Save In (Win) or Where(Mac) list arrow, and then selectwhere you want to save the brushset.
Click Save.6
5
4
3
2
1
2
Did You Know?You can access your customized setsdirectly from the Brush Options menu.When you save your customized brushset, put them in the Brushes folder,located in the Adobe PhotoshopCS5/Presets folder. Brush sets savedhere appear in the Brush Options menualong with the other Photoshop pre-sets.
6
5
4
3
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 225
Photoshop's Brush and Airbrush tools were designed to reproduce thevisual effect of applying paint to a canvas. You have full control over thebrush tip, color, size, opacity, and even the brush's blending mode.Control over the image is achieved by using additional layers to hold thebrush strokes—but remember, adding additional layers increases thefile size of a Photoshop document. Since layers have their own individ-ual options, such as opacity, fill, and blending modes, you achieve evengreater control over the final design by giving brush strokes their ownlayers. Once the brush stroke is to your liking, you can always mergethe brush-stroke layer into the image to conserve file size.
Working with theBrush and AirbrushTools
Work with the Brush andAirbrush Tools
Select the Brush tool on thetoolbox.
Select a brush tip on the Optionsbar or from the Brush panel.
Specify Paint Engine options forthe brush from the Brush panel.
Select from the following Brushoptions on the Options bar:
◆ Mode. Click the list arrow tochoose from the availableblending modes. The blendingmodes controls how the activebrush color blends with thecolors in the active image.
◆ Opacity. Enter an opacitypercent (1% to 100%), or clickthe list arrow, and then dragthe slider left or right.
◆ Flow. Enter a flow percentage(1% to 100%), or click the listarrow, and then drag the sliderleft or right. When you applythe brush, Flow controls theamount of ink supplied to thebrush.
◆ Airbrush. Click the button tochange the Brush into anAirbrush.
Drag within the image to paint.5
4
3
2
1 2 4
Tracedwith a 50%OpacityPaintBrush.
1
Using the Brush and Airbrush ToolsThe Brush and Airbrush tools look the same, but they perform quitedifferently. The Brush tool maintains a specific opacity; for example,if you choose 50% opacity, the Brush maintains that opacity no mat-ter how many times you pick up your pen and start again. However,if you release and drag again over the same area, the Brush addsanother 50% application of ink to the image, producing a more satu-rated result. The Airbrush tool works by accumulation—dragging theimage produces a brush stroke based on the opacity of the brushand the speed with which you move the tool across the image. If youhold the Airbrush tool in one position, the ink color will slowlyincrease until it reaches 100%, just like a real airbrush.
For Your Information
226 Chapter 9
With the Mixed Brush tool (New!), you can define multiple colors on asingle brush tip, and then mix and blend them together with the underly-ing hues on your canvas. With a photo, you can use a dry, empty brushto blend the existing colors while at the same time adding a paintingeffect to the image. Mixer Brush options on the Control panel allow youto control the wetness of the brush, the load rate to add paint to thebrush, the mixing rate between the brush and canvas color, andwhether the brush is refilled, cleaned, or both after each painting stroke.
Working with theMixed Brush Tool
Work with the Mixed Brush Tool
Select the Mixed Brush tool on thetoolbox.
Select a brush tip on the Optionsbar or from the Brush panel.
Select a mixing color.
Click the Current Brush Load listarrow, and then select Load Brush,Clean Brush, or Load Solid ColorsOnly.
Click the Load the Brush AfterEach Stroke or Clear the BrushAfter Each Stroke button.
Click the Blending Combinationslist arrow, and then select apreset.
Specify a percentage (1% to100%), or click the list arrow, andthen drag the slider for any of thefollowing Mixed Brush options onthe Options bar:
◆ Wet. Controls the wetness ofthe brush.
◆ Load. Controls the load rate toadd paint to the brush.
◆ Mix. Controls the mix ratebetween the brush and canvascolor.
◆ Flow. Controls the amount ofink supplied to the brush.
Drag within the image to paint.8
7
6
5
4
3
2
1
4 51
6
7
2
Pick up wet paintfrom all layers
Change to an airbrush
3
8
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 227
The Pencil tool is exactly what its name implies…a pencil. The Penciltool is limited to hard brush tips of any size or shape, and createsfreeform lines using the current foreground color. In fact, the major dif-ference between the Pencil and Brush tools is the Pencil tool's inabilityto draw anything but a hard-edged line. A unique feature of the Penciltool is its ability to switch between the current foreground and back-ground colors using the Auto Erase feature.
Working with thePencil Tool
Work with the Pencil Tool
Select the Pencil tool on thetoolbox.
Click the Brush Preset Picker listarrow, and then click a brush tip.
Click the Mode list arrow, and thenselect a blending mode.
Enter an Opacity percentage value(1% to 100%).
Drag the Pencil tool across theactive document.
5
4
3
2
1
12 3 4
5Did You Know?
You can use the Pencil tool to createcalligraphy lettering. Select the Penciltool, click black as your painting color,and then click one of the oblong brushtips on the Options bar. If you own adrawing tablet, use the tablet with thePencil tool to create beautifully formedcalligraphy letters.
228 Chapter 9
The Auto Erase feature lets you automatically switch the Pencil tool'spainting color using the current foreground and background colorswatches. The trick is where you start drawing the line. If you startdragging the brush tip from a new location in the document, the Penciltool creates a line in the active foreground color. If you then place thebrush tip on a previously drawn line and drag, the Pencil tool creates anew line in the active background color. Since the Auto Erase featuredoesn't really erase anything, it will perform exactly the same way on atransparent layer as it does on the background layer.
Working with Auto Erase
Work with Auto Erase
Select the Pencil tool on thetoolbox.
Select the Auto Erase check boxon the Options bar.
Drag the Pencil tool across theactive document to create a line inthe active foreground color.
Click anywhere in the backgroundand the Pencil tool will use theforeground color.
Move the brush tip over one of theprevious lines, and then drag tocreate a line in the activebackground color.
5
4
3
2
1
12
4 5
3
Did You Know?You can draw straight lines with thePencil tool. Click once in the documentto create a black dot, move to anotherposition, hold down the Shift key, andthen click again. When you hold downthe Shift key, the Pencil tool creates astraight line between the two mouseclicks.
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 229
The Line tool lets you draw lines by dragging from one point in theactive document and releasing in another. You can draw lines at pre-cise 45- or 90-degree angles by holding down the Shift key as you drag.Select the Line tool, or if you already have another drawing toolselected, you can choose the Line tool from the toolbox. Then configurethe Line tool using the Options bar. It's also a good idea to create thelines in a separate layer. That way, once the lines have been drawn, it'sas easy as selecting the Move tool and repositioning them where youwant them.
Working with the Line Tool
Work with the Line Tool
Select the Line tool on the toolbox.
Click the Fill Pixels button tocreate raster shapes in the activeforeground color.
Click the Geometry options listarrow, and then select from thefollowing options:
◆ Arrowheads. Select the Startand/or End check boxes tocreate arrowheads on the line.
◆ Width. Enter a percentage (10 to 1,000), to determine thewidth of the arrowhead inrelation to the width of the line.
◆ Length. Enter a percentage (10 to 5,000), to determine thelength of the arrowhead.
◆ Concavity. Enter a percentage(-50 to +50) to determine theconcavity of the arrowhead.
Enter a value (1 to 1,000 pixels) todetermine the weight of the line.
Click the Mode list arrow, and thenselect a blending mode.
Enter an Opacity percentage value(1% to 100%).
Select the Anti-alias check box tocreate a visually smoother line.
Drag in the document window tocreate the line.
8
7
6
5
4
3
2
1
1
65432
8
7
Using the Line ToolThe Line tool can be used to create customized guidelines for thoseprojects that require something other than vertical or horizontalguidelines. Just create a new layer, and then select the Line tool.Choose a line weight (width) of one or two pixels, select a drawingcolor that contrasts with the image, and then draw the requiredguides. When you're finished, lock the layer, and use the visualguides to complete your project. Hide the layer when it's not needed,and finally, delete the layer when you're done with the job. One morething—remember to turn off the Arrowheads option.
For Your Information
230 Chapter 9
Creating standard shapes, such as polygons or rectangles withrounded corners, used to be a hassle. That is, until Photoshop releasedits Standard Shape drawing tools. Now, it's a simple matter of selectingthe correct tool, choosing a color, and then drawing the shape. As withany of Photoshop's drawing functions, control is maintained with theuse of additional layers. Photoshop's standard shapes include rectan-gles, rounded rectangles, ellipses, and polygons. Each one of the shapetools comes with additional options to control exactly how the shapeappears when drawn.
Using the StandardShape Tool
Work with the Standard Shape Tool
Select the Rectangle, RoundedRectangle, Ellipse, or Polygon toolon the toolbox.
Click the Fill Pixels button tocreate raster shapes in the activeforeground color.
To switch tools, click theRectangle, Rounded Rectangle,Ellipse, or Polygon tool buttons.
Click the Geometry options listarrow, and then select from thefollowing drawing options orcheck boxes:
◆ Unconstrained. (Rectangle,Rounded Rectangle, Ellipse)
◆ Square. (Rectangle, RoundedRectangle)
◆ Circle. (Ellipse)
◆ Fixed Size. (Rectangle,Rounded Rectangle, Ellipse)
◆ Proportional. (Rectangle,Rounded Rectangle, Ellipse)
◆ From Center. (Rectangle,Rounded Rectangle, Ellipse)
◆ Snap to Pixels. (Rectangle,Rounded Rectangle)
4
3
2
1
1
4
Various standardshapes
2 3
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 231
◆ Radius. (Polygon)
◆ Smooth Corners. (Polygon)
◆ Star. (Polygon)
◆ Indent Sides By. (Polygon)
◆ Smooth Indents. (Polygon)
Click the Mode list arrow, and thenselect a blending mode.
Enter an Opacity percentage value(1% to 100%).
Select the Anti-alias check box tocreate a visually smoother image.
Useful when drawing shapes withcurved edges.
Drag in the document window tocreate the shape.
IMPORTANT Maintain controlover your design by drawingshapes in separate layers.
8
7
6
5
65
8
Using the Standard Shape ToolOnce a shape has been created, you can use Photoshop's extensivelayer effects options to colorize the shape, add a drop shadow orbevel, or even apply a gradient or pattern to the shape. Rememberthat in order to apply layer effects to the shape it must be isolated onits own layer.
For Your Information
7
232 Chapter 9
Having the ability to draw a perfect polygon or rounded-corner rectan-gle is nice; however, Photoshop went way beyond standard shapeswhen it introduced the Custom Shape tool. Photoshop now comespackaged with dozens of predesigned shapes, or you can even createyour own. User-defined shapes can be made from literally any vectorobject. For example, a company logo can be converted to a customshape. Custom shapes have many time-saving applications. As previ-ously mentioned, a company logo, if used frequently, is only a mouseclick away. Any vector form, outline, or shape used on a recurringbasis, can be converted to a custom shape and saved for future use.Select the Custom Shape tool or, if you have any shape drawing toolselected, click the Custom Shape button from the Options bar, and thenconfigure the shape using choices from the Options bar.
Working with theCustom Shape Tool
Work with the Custom Shape Tool
Select the Custom Shape tool onthe toolbox.
Click the Fill Pixels button tocreate raster shapes, using theactive foreground color.
Click the Geometry options listarrow, and then select from theavailable options: Unconstrained,Defined Proportions, Defined Size,Fixed Size, or From Center.
Click the Shape list arrow, andthen select a shape from theavailable options.
Click the Mode list arrow, and thenselect a blending mode.
Enter an Opacity percentage value(1% to 100%).
Select the Anti-alias check box tocreate a visually smoother line.
Drag in the document window tocreate the customized shape.
8
7
6
5
4
3
2
1
1
32 4
65
8
7
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 233
Custom shapes can be created from anything you choose, and theprocess is quick and simple. You just create the shape, select theshape, and name the shape. That's it. Since shapes are vector images,they're resolution-independent, which means you can draw them atany size without impacting image quality. Once custom shapes aresaved, they can be accessed by opening a document, selecting theShape tool, and choosing your new shape from the Custom Shapespanel.
Creating a CustomShape
Create a Custom Shape
Open a document that containsthe vector image you want toconvert into a shape, or create ashape using any of Photoshop'svector drawing tools.
Click the Edit menu, and then clickDefine Custom Shape.
Enter a name for the new shape.
Click OK.
The shape appears as a thumbnailat the bottom of the active CustomShapes panel.
4
3
2
1
3 4
1
Shape designedin a Shape layer
Did You Know?You can move Photoshop shapes intoother vector programs, such asIllustrator, FreeHand, and even Flash.Click the File menu, point to Export, andthen click Paths To Illustrator. Namethe new document, and then clickSave.
234 Chapter 9
Creating customized sets of shapes is an excellent way to get organ-ized. The next time you need a specific shape all you have to do isselect the shape from your organized sets. Organization can save youtime, but it also lends a sense of consistency to designs. Using thesame customized shapes repeatedly helps to tie the elements of adesign together, and Photoshop gives you the perfect way to maintainthat consistency with customized shape sets.
Saving Custom Shape Sets
Save Custom Shape Sets
Select the Custom Shape tool onthe toolbox.
Click the Shape list arrow to see alist of the current shapes.
Create new shapes, and then addthem to the current list.
IMPORTANT As you createnew shapes, if there are some youdon’t like, delete them. Right-clickthe shape, and then click DeleteShape.
To add preexisting shapes, clickthe Options button, and then clickLoad Shapes, or choose from theavailable predefined shape lists.
Click the Options button, and thenclick Save Shapes.
Enter a descriptive name for thenew set in the File Name (Win) orthe Save As (Mac) box.
Click the Save In (Win) list arrowor Where (Mac) popup, and thenselect a location to save the newset.
IMPORTANT If you save thenew set in the Custom Shapesfolder, located in the AdobePhotoshop CS5 application folder,the new set will appear as apredefined set when you click theShapes Options button.
Click Save.8
7
6
5
4
3
2
1
1
2 5
8
7
6
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 235
The Paint Bucket tool is not new; in fact, it's been around almost aslong as Photoshop. The Paint Bucket's primary function is to fill an areawith the active foreground color, but that's not all it's capable of doing.The Paint Bucket tool can fill areas with a selected pattern and, muchthe same way that the Magic Wand tool selects image information, thefill area can be controlled by the shift in brightness of image pixels.Combine those features with the ability to change the Paint Bucket'sblending mode or opacity, and you have a tool with a lot of horsepower.
Using the Paint Bucket Tool
Use the Paint Bucket Tool
Select the Paint Bucket tool on thetoolbox.
Click the Fill list arrow, and thenselect an option:
◆ Foreground. Fills a selected area with the currentforeground color.
◆ Pattern. Fills a selected areawith a pattern.
Click the Pattern list arrow, andthen select a predefined fillpattern. This option is available ifyou select Pattern as a fill option.
Click the Mode list arrow, and thenselect a blending mode.
Enter an Opacity percentage value(1% to 100%).
Select a Tolerance value (0 to 255).The Tolerance value influences therange that the Paint Bucket usesto fill a given area.
Select the Anti-alias check box tocreate a visually smoother line.
Select the Contiguous check boxto restrict the fill to the selectedarea.
Select the All Layers check box tofill the color range informationfrom all the image’s layers.
Click the Paint Bucket tool cursoron the area to be changed.
10
9
8
7
6
5
4
3
2
1
1
42 5
6
3
7 8
9
10
236 Chapter 9
Photoshop's basic Eraser tool converts image pixels in a layer to trans-parent pixels. While the primary function of the Eraser tool has notchanged, the tool itself has been greatly improved. For example, youcan use the Eraser tool to remove a specific color or to erase aroundthe edge of an object. You can instruct the Eraser tool to remove a spe-cific color while protecting another color and at the same time,increase or decrease the tool's tolerance (the range of selection). Ifyou use the Eraser tool on a layered document, the tool will erase totransparency. If the Eraser tool is used on a flattened document (flat-tened documents do not support transparency), the Eraser tool will usethe active background color to perform the erasure. As you can see,the eraser tools do more than blindly erase image information. As youmaster the eraser tools, you just may find those complicated eraserjobs becoming easier and easier. The Background Eraser tool lets youselect specific colors within an image and erase just those colors.
Working with theEraser Tools
Use the Basic Eraser Tool
Select the Eraser tool on thetoolbox.
Click the Brush list arrow, and thenselect a brush tip.
Click the Mode list arrow, and thenselect a blending mode.
Enter an Opacity percentage value(1% to 100%) to determine howmuch the eraser removes from theimage.
Enter a Flow percentage value (1% to 100%) to determine thelength of the eraser stroke.
Click the Airbrush button tochange the solid eraser stroke ofthe eraser to that of an airbrush.
Select the Erase To History checkbox to temporarily turn the Eraserinto a History Brush.
Drag the Eraser over an imagelayer to convert the image pixelsto transparency.
8
7
6
5
4
3
2
1
1
32 4 5 6
8
7
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 237
Use the Background Eraser Tool
Select the Background Eraser toolon the toolbox.
Click the Brush list arrow, and thenselect a brush tip.
Click one of the Sampling buttons(determines how the BackgroundEraser selects the color range):
◆ Continuous. Continually selectsa color range as you drag theEraser tool across the image.
◆ Once. Samples a color rangewhen you first click yourmouse.
◆ Background Swatch. Onlyerases the active backgroundcolor.
Click the Limits list arrow, andthen click how far you want theerasing to spread:
◆ Discontiguous. Lets the Erasertool work with all similar colorrange pixels throughout theimage.
◆ Contiguous. Restricts theEraser tool to the selectedcolor range, without movingoutside the originally sampledarea.
◆ Find Edges. Looks for a shift incolor range and attempts toerase to the visual edge of theimage.
Select a Tolerance percentagevalue (1% to 100%). The higher thetolerance, the greater the range.
Select the Protect ForegroundColor check box to prevent thatcolor from being erased.
Drag in the image to erase.7
6
5
4
3
2
1
1
32 4 5 6
7
Using the Background Eraser ToolThe Background Eraser tool erases an image by converting theimage pixels to transparency. If you attempt to use the BackgroundEraser tool on a flattened image, the tool will automatically convertthe flattened background into a normal layer. Photoshop is actuallymaking an assumption that if you're using the Background Erasertool, you obviously need the image to be on a layer that supportstransparency, not a background layer.
For Your Information
238 Chapter 9
The Magic Eraser tool functions the same way as the Magic Wandselection tool, except that instead of selecting an area, it erases it. TheMagic Eraser tool works on any traditional Photoshop layer, as well asthe Background layer. Clicking with the Magic Eraser tool convertsimage pixels into transparent pixels. Since the Background layer doesnot support transparency, using the Magic Eraser tool causesPhotoshop to convert the Background into a traditional layer.
Working with theMagic Eraser Tool
Work with the Magic Eraser Tool
Select the Magic Eraser tool onthe toolbox.
Enter a Tolerance value (0 to 255).The higher the value, the greaterthe range the Magic Erasererases.
Select the Anti-alias check box tocreate a visually softer eraser(useful when dealing withintensely rounded or curvedselections).
Select the Contiguous check boxto select adjacent pixels within theactive document.
Select the Sample All Layerscheck box to sample imageinformation from all layers(Photoshop then treats the visualimage as a composite).
Click within the active document.
The Magic Eraser tool, dependingon the options you choose,samples the pixels directly underthe tool and uses that data tocreate a range for erasing imageinformation.
6
5
4
3
2
1
1
32 4 5
6
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 239
While most of Photoshop's painting and drawing tools let you select andpaint with a single color, the Gradient tool lets you paint with a veritablerainbow of colors. The Gradient tool comes packaged with several setsof predesigned gradients—including color, transparent, and neutral den-sity (New!) options—or you can create and save your own customizedgradient sets. The process of creating a gradient is simple; you select agradient along with a specific type (Linear, Radial, etc.), and then drag inthe document window. The length and angle of the drag determines howthe gradient is applied. Since gradients, by default, overwrite image pix-els, it's a good idea to create gradients in separate layers.
Creating and ApplyingGradients
Create a Standard Gradient
Select the Gradient tool on thetoolbox.
Click the Gradient list arrow, andthen select from the availablegradients.
◆ The preset gradients includeForeground to Transparent,Chrome, Spectrum, TransparentRainbow, Transparent Stripes,and Neutral Density (New!).
Select one of the followinggradient types from the five icons:
◆ Linear, Radial, Angle, Reflectedor Diamond.
Click the Mode list arrow, and thenselect a blending mode.
Enter an Opacity percentage value(1% to 100%).
Select the Reverse check box toreverse the color order of theselected gradient.
Select the Dither check box tovisually create a smoothertransition between gradient colors.
Select the Transparency checkbox to create gradients using agradient mask (allows fortransparency in the gradient).
Drag in the image to create agradient.
9
8
7
6
5
4
3
2
1
1
5 6 7 8
2 3 4
9
Adding Predefined GradientsTo add a predefined gradient, you must first select the Gradient tool.Click the Gradient Picker button, located on the Options bar, to useone of the available gradient sets. Choose to append the new gradi-ents to the existing list, or click OK to replace the existing gradientswith the new ones.
For Your Information
240 Chapter 9
Customized gradients are easy to create and essential when you justcan't find what you want in Photoshop's predefined sets. It doesn'tmatter how many gradients Photoshop provides for you, there willalways be that one instance where they just don't do the required job.With just a few clicks of your mouse, you can create your own cus-tomized gradients. You can start with one of Photoshop's gradients andmodify it to your needs. You can also start completely from scratch; thechoice is yours, and so are the rewards of creating that one-of-a-kindstunning gradient you can use for your current and future projects.
Creating and SavingCustomized Gradients
Create and Save a CustomizedGradient
Select the Gradient tool on thetoolbox.
Click the thumbnail of the activegradient on the Options bar toopen the Gradient dialog box.
Select a gradient from theavailable options that is close towhat you want to create.
◆ The preset gradients includeForeground to Transparent,Chrome, Spectrum, TransparentRainbow, Transparent Stripes,and Neutral Density (New!).
Enter a name for the new gradient.
Click New.
A thumbnail (copy of the selectedgradient) appears at the bottom ofthe list.
Click the Gradient Type list arrow,and then select one of thefollowing:
◆ Solid. Uses solid colors for thegradient.
◆ Noise. Uses noise to distributethe colors.
6
5
4
3
2
1
3 4
5
6
2
Chapter 9 Using the Paint, Shape Drawing, and Eraser Tools 241
Click the Smoothness list arrow,and then select one of thefollowing:
◆ Smoothness. A percentagevalue (0% to 100%) thatdetermines how smoothly thecolors of the gradient blendtogether (available when theSolid option is selected).
◆ Roughness. A percentage value(0% to 100%) that determineshow much noise to introduceinto the gradient colors(available when the Noiseoption is selected).
To add Opacity Stops, click abovethe gradient line; to removeOpacity Stops, drag the stop awayfrom the line.
To add Color Stops, click below thegradient line; to remove ColorStops, drag the stop away from theline.
Click on an Opacity Stop, and thenenter an Opacity percentage (0%to 100%), and a Locationpercentage (0% to 100%) for thestop to place it on the line.
Click on a Color stop, and thenselect a color, and a Locationpercentage (0% to 100%) for thestop to place it on the line.
Click Delete to delete the selectedopacity or color stop.
Click Save to save the newgradient set.
The set will include the newgradients, and all the gradientsthat appear in the Presets panel.
Click OK.14
13
12
11
10
9
8
7 8
9 11 10
12
13
14
7
Creating a Customized GradientGradients serve many purposes. They can be used to jazz up a shapedrawn with Photoshop's drawing tools or they can be applied to anentire document and used as a background on a web page,brochure or newsletter. Whatever you use gradients for, rememberthat they are powerful image elements. Use gradients to attractattention to a document, but don't use them if they draw people'seyes away from the main elements of the image. It will be a smallconsolation to know that your fantastic marketing graphic attractedattention, but everyone was so focused on your special effects andgradients, they forgot to buy what you were selling. Remember, it'salways about the message. An image is worth a thousandwords…let the image tell its story.
For Your Information
242 Chapter 9
The Color Replacement tool lets you replace a specific color in yourimage. For best results use soft brushes with this tool to help blend thecolors into the original image. Have you ever captured that perfect pic-ture of a family member or friend, only to find they have red eyes? Ormaybe there's a part of your image where the color draws attentionaway from the focal point. Either way, the Color Replacement tool is agreat feature that allows you to take control of the final image.
Using the ColorReplacement Tool
Use the Color Replacement Tool
Select the Color Replacement toolon the toolbox.
Select a Brush tip on the Optionsbar.
Select from the available Samplingoptions:
◆ Continuous. Samples colorscontinuously as you drag.
◆ Once. Replaces the targetedcolor only where you click.
◆ Background Swatch. Erasesareas matching the background.
Select from the available Limitsoptions:
◆ Discontiguous. Replaces thesampled color under the pointer.
◆ Contiguous. Replacesconnected areas containing thesampled color and preservesthe sharpness of shape edges.
◆ Find edges. Limits painting ofthe replacement color within anobject as defined by its edges.
Enter a Tolerance percentage value(0% to 255%).
Select the Anti-alias check box fora smoother edge on areas youcorrect.
Select a foreground color to use toreplace the unwanted color.
Drag in the image over the coloryou want to replace.
8
7
6
5
4
3
2
1
8
2 4 5
6
1
7
3
531
Index
Aabsolute colorimetric rendering intent, 429accented edges filter effect, 357Acrobat 4 color system, 432Acrobat ConnectNow, 515actions, 359-380. See also droplets
adding command to action, 366buttons, converting to, 361Conditional Mode Change command,
410copying, 370
sets, copying between, 374deleting command from action, 367enhanced scripting of, 376-377files, saving actions as, 373modal controls, working with, 368moving actions between sets, 374multiple sources, calling actions from,
371names for action sets, 374new action, building, 362non-recordable commands, inserting,
375order of commands, changing, 369pauses in, 368play options, 378playback of command, controlling, 365recording actions, 363running actions inside actions, 371saving, 359
files, saving actions as, 373sets, saving actions into, 372
setscreating, 372files, saving actions as, 373moving and copying between, 374names for, 374
speed of executing, 369
stop to action, adding, 364Actions dialog box, 373Actions panel, 359-361. See also
actions; dropletsAdd Layer Mask button, 245, 247
with type masks, 329Add Layer Styles button, 247, 287, 302Add New Layer button, 107Add Noise filter, 152Additional Plug-Ins Folder, 66Additive RGB, 180adjustment layers, 105
advantages of, 141blending modes with, 148composite layers, creating, 145creating, 142deleting, 147file formats for, 142filters on masks, 151grouping, 146HDR Toning, 210-211Levels adjustment for, 172-173linking layers in, 117, 145masks with, 150-151merging, 144-145modifying, 143opacity, working with, 148pain on adjustment masks, 150regular layer, converting to, 147temporary composite images, creating,
145Adobe (ACE) color management, 436Adobe Acrobat Connect, 502, 511Adobe Acrobat Reader, 4Adobe Bridge. See BridgeAdobe Creative Suite, 1, 502
Bridge with, 13Adobe CS Live, 502, 514, 516-517
532
Adobe Device Central, 502, 518-519Adobe Extension Manager, 502, 520Adobe ExtendScript Toolkit 502Adobe Flash. See SWF filesAdobe Gamma utility, 424Adobe Help Center, 4, 26-27Adobe Illustrator. See IllustratorAdobe Ray Tracer, 490Adobe Updater Preferences dialog box, 4,
24-25Airbrush, 167, 221, 225align layers, Auto, 482-483alpha channels
different file formats, saving as, 393saving, 28
altitude values for Bevel and Emboss style, 291
anchor points. See also pathswith Magnetic Lasso tool, 83
angle valuesfor Bevel and Emboss style, 291for Drop Shadow style, 288with Smart Sharpen filter, 162
animations, work with, 460-461animated GIFs
creating, 458-459annotations. See notesanti-aliasing, 221
for Bevel and Emboss style, 292Character panel selections, 313Column Marquee tools and, 80with Custom Shapes tool, 232for Drop Shadow style, 289for Inner Glow style, 301with Line tool, 229and Magic Eraser tool, 238multi-page PDFs to PSDs, converting,
413for Outer Glow style, 299with Paint Bucket tool, 235for paths with fill, 280setting options for, 315with Type tool, 309, 311
Apple Computers. See also MacintoshArc and Arch styles of warped text, 316arrange
multiple documents, 42arrowheads with Line tool, 229
Art History brush, 127, 138artistic filters, 332
for layer mask borders, 249Asian text options, 70Auto-Align, 482-483Auto-Blend, 482-483Auto Color command, 197Auto Contrast and Color command, 175Auto Contrast command, 197Auto Erase, 228Auto levels command, 198Automate commands, 407-422
BBackground Eraser tool, 236-237backgrounds, 105, 216-217
converting into layers, 112-113default and switching of colors, 217Foreground and Background colors,
216-217Merge Visible option, 113multi-layered documents into back-
grounds, converting, 113Screen Mode determining, 37
Barrel distortion, 156-157baseline shift, 307
Character panel selections, 313batch commands with Bridge, 420-421Batch File Processing, 408-409BBEdit, 376Bevel and Emboss style
contours, working with, 291-292with layer masks, 247Texture option for, 292-293with type masks, 326-327working with, 290-291
Bicubic Sharper method, 54Bird’s Eye view, 38-39bit depth, 176bitmap color modes, 179, 183bitmapped fonts, 311black and white. See also Grayscale
color modeThreshold adjustment for, 209Black & White adjustment, 213
Black Point Compensationfor converting color space, 437
Index 533
for soft-proof colors, 426blade curvature with Lens Blur filter
option, 345blend modes, 09
with adjustment layers, 148Color Overlay style with, 294for Drop Shadow style, 288Fill blending mode, 195for Inner Shadow style, 300with layer masks, 249with layers, 118for Outer Glow style, 298with Pattern Overlays, 296for Stroke layer style, 295
blend layers, Auto, 482-483bloating with Liquify, 336Blur filters. See also Lens Blur filter
Box Blur filter, 158channel masks, softening effects of, 259in Quick Mask Mode, 263Shape Blur filter, 158-159Surface Blur filter, 158-159
Blur tool, 164BMP files, 391
layers exported as, 124borders
Auto Color command with, 197channel mask borders, moving, 260layer mask borders, creating, 249paths, creating shapes as, 282
boundaries, proportional transform, 96bounding boxes, 249
clipping paths and, 278in Print dialog box with preview, 383Show Bounding Box check box, 382
Box Blur filter, 158Bridge, 1, 4
automating, tasks, 512camera raw, 506-507closing documents and opening, 31exploring, 503images, working with, 508-509Mini Bridge, 513opening files with, 16photos, getting, 505preferences, 510-511starting, 504with Adobe Creative Suite 2, 13, 433
brightness. See also HSB (hue, saturation, brightness)
with Lens Blur filter, 345Brightness/Contrast adjustment, 175, 200Brush font, 298brush strokes filters, 332
in Quick Mask Mode, 263brush tips, 220
cursor options, 60customized brush tips, creating, 223saving, 224
brushes, 215. See also specific toolswith Color Replacement tool, 242Liquify tool option, 338in Quick Mask Mode, 262with Vanishing Point tool, 154
Brush Options menu, 224Brush panel, 218
pre-defined sets in, 220Brush Presets panel, 218
modifying, 219built-in scripts, 377Bulge style of warped text, 316Burn tool, 167
Ccache preferences, 53
setting levels, 68calibrating colors. See color managementcalligraphy lettering, Pencil tool for, 227Camera Data 1 and 2, 394Camera Raw
dialog box, 18-19, 506-507preferences in Bridge, 506preferences in Photoshop, 57
center justification, 311chain button with layer masks, 245channel masks, 243. See also Quick
Mask Modecombining, 261deleting, 258-259filter effects, controlling, 352-353Gaussian Blur filter with, 259, 261loading, 258-259modifying options, 254moving masks between documents, 260from native color channels, 256-257
534
channel masks (continued)pre-existing channels, options, 254saving, 258-259from scratch, 253from selections, 255showing/hiding, 253softening effects of, 259working with, 252
Channel Mixer adjustment, 205channels, 175. See also channel masks
Channel Mixer adjustment, 2058-bit channels, 176-177Spot color channels, 196
Channels panel. See also channel masksselections, creating, 92working with, 178
Character panel, 72-73, 307showing/hiding, 311
Character panelworking with, 312-313
Chisel Hard Technique for bevel, 290chiseled text
creating, 300with type mask, 326-327
choke value for Inner Glow style, 301chromatic aberration, 156Cineon files, 391circles with Standard Shape tool, 230clipart for Web, preparing, 398-399clipboard
with Pattern Maker filter, 348preferences for, 55
clipping. See also pathsmasks, creating, 107
Clone Stamp tool, 166, 489Clone Source panel, 165, 168, 170, 489closing documents, 31CMYK (cyan, magenta, yellow, black) color,
13, 47, 179. See also color manage-ment; out-of-gamut
Color Slider, 190converting images to, 181Multi-Channel color mode, converting
images to, 188patterns, generation of, 349press, preparing images for, 402-403RGB (red, green, blue) color and, 179,
428
soft-proof colors, setting up, 426-427Spectrums or Ramps, 191
Color Balance command, 175, 199-200Color Dynamics, 218, 221Color Intensity with Match Color
adjustment, 203color lookup table (CLUT), 184-185color management, 423-441. See also ICC
Profile; out-of-gamut; rendering intentconverting color space to profile,
436-437different profiles to document,
assigning, 435defaults, 432-433hardware, calibrating with, 425monitors, calibrating, 424RGB to CMYK, changing from, 428soft-proof colors, setting up, 426-427software, calibrating with, 425working with, 432-433
Color Management button, 384color markers, creating, 46color modes, 13, 179
bitmap color modes, 183changing, 179Replace Color command, 189selecting, 13
Color Overlay, 285applying, 294
Color panel, 190-191for PNG-8 documents, 454
Color Pickerselecting colors from, 65text color, changing, 309
Color Replacement tool, 242color sliders, 190
preferences for, 55Color Swatch button, 311colors, 175. See also channels; CMYK (cyan,
magenta, yellow, black) color; colormanagement; Info panel; RGB (red,green, blue) color; spot colors; tonal values; unified color table
Auto Color command, 197Auto Contrast command, 197Auto levels command, 198Background colors, 216-217Background Eraser tool, 236-237
of brush tips, 223
Index 535
Black & White adjustment, 213Channel Mixer adjustment, 205clipart for Web, preparing, 398Color Balance adjustment, 199-200Color Replacement tool, 242Curves adjustment, 200deleting on Swatches panel, 192Desaturate command, 202for Drop Shadow style, 288Equalize command, 208Eraser tools with, 236-237fill colors, changing, 322Fill command, 194-195Foreground colors, 216-217for GIF documents, 452Gradient Map adjustment, 206Grid options, 64-65Guides option, 64-65for Inner Glow style, 300Invert command for, 208levels adjustment, 198Macintosh, printing in, 387Match Color adjustment, 203Navigator panel view box color, 36of notes, 45for Outer Glow style, 298Photo Filter option, 207, 346for PNG-8 documents, 454Posterize adjustment for, 209in Quick Mask Mode, 263Replace Color command, 189selection by color range, 87Selective Color adjustment, 204Slice option, 64-65Stroke command, 194Swatches panel, 192-193text color, changing, 309for transparency grid, 61
ColorSync, 424, 436workflow, setting, 432
color settings, 432with Creative Suite, 433
columns and rowsruler options, 63Single Row/Column Marquee tools, 80
combine layers, Auto, 482-483combining channel masks, 261
commands. See also specific commandsenhanced scripting of, 376-377
compression. See file compressioncomps, layer, 123concavity with Line tool, 229Conditional Mode Change command, 410Content-Aware fill, 100-101Content-Aware scaling, 99contours
for Bevel and Emboss style, 291for Outer Glow style, 299working with, 292
Convert Point tool, 277Convert To Mask button, 252Convert To Profile command, 436copies
different file formats, save as, 393file copies, saving, 28printing, 386, 388
copying. See also actions; layersdo not copy watermarks, 355History states, 128, 133selection, 95with Vanishing Point tool, 154-155
copyrights, watermarks protecting, 331, 354-355
contoursfor Drop Shadow style, 289for Inner Glow style, 301
Count toolcounting, 478-479preferences, 64-65
crawling marquee, 266Create New Action button, Actions panel,
360-361, 362Create New Channel button, 252Create New Layer button, 249
duplicating layers with, 120Create New Set button, Actions panel, 361Create Plane tool, 154Crop and Straighten Photos command,
407, 411Crop command, 407cropping selections, 91CS Live, 502, 514, 516-517cursors
painting cursor options, 60preferences, 60
536
Curves adjustment, 175, 200with channel masks, 257
custom preset document, creating, 12Custom Shapes tool, 232-234
creating custom shapes, 233saving shape sets, 234
customizing, 51. See also layer stylesbrush tips, 223color settings, 432-433Swatches panels, 193user interface, 74-75workspace, 72-73
cutout filter effect, 356
Ddata driven graphics, 472DCS files, 391
press, preparing images for, 402-403defaults for panels, 7-9Delete button, Actions panel, 361deleting. See also layers
actions, commands from, 367adjustment layers, 147anchor points in paths, 272-273with Bridge, 508-509channel masks, 258-259customized workspace, 72-73linked layers, 121notes, 45panels, 7-9pixels, 44presets, items in, 71ruler guides, 49Swatches panel, colors on, 192text, 309
density option, 387, 356depth values
for Bevel and Emboss style, 290Lens Blur filter option, 345for texture, 293
Desaturate command, 202Despeckle filter, 160destination for droplets, 379Device Central, 518-519DICOM files, 391Difference Blending Mode, 148diffuse glow filter effect, 357
digital camerascalibrating, 425importing raw data from, 18-19noise from, 153
digital watermarks, embedding, 331, 354-355
Direct Selection tool, 275curve of segment line, changing, 277type path, reshaping, 330
direction for Bevel and Emboss style, 290Display preferences. See also interfacedistance values
for Drop Shadow style, 289Lens Blur filter option, 345
distortion, 332with Free Transform command, 96for layer mask borders, 249Lens Correction filter and, 156-157in Quick Mask Mode, 263Transform command selection, 97
distribution option with Add Noise filter,152
ditheringclipart for Web, preparing, 398for GIF documents, 453for gradients, 239for Indexed color mode, 184for PNG-8 documents, 455for WBMP documents, 429
DNG filesinformation on, 507raw images saved as, 18-19, 506-507
do not copy watermarks, 355Dock, painting engine in, 218docking, 6
document windows, 42document dimensions, 30document window, 6
moving images in, 41Vanishing point tool, working with, 154-
155documents. See also layers; new docu-
mentsall documents, closing, 31backgrounds, converting multi-layered
documents into, 113closing, 31custom preset document, creating, 12
Index 537
dragging layer thumbnails into documents, 44
inserting, images, 17file information into, 394-395
New Document Preset Resolutions, 62-63
multiple, arrange, 42organizing documents, 393profiles, 30saving, 28-29sizes, 30
Dodge tool, 167downloading
DNG converters, 19layer styles, 304patches, 24-25updates, 24-25
dragging layer thumbnails into documents,44
drawing tablets, 120Drawing tool, 215Drop Shadow, 286
creating, 288-289with layer masks, 247modifying, 288-289
droplets, 359creating, 378-379naming options, 379using, 380
dry brush filter effect, 356DSC 2.0 color plates, 196Dual Brush, 218, 221Duotone color mode, 179
converting images to, 187duplicating. See copyingDust and Scratches filter, 152dynamic range, 176-177. See also High
Dynamic Range (HDR) images
EEdit Plane tool, 270editing
animated GIFs, 463inserted documents, 17nondestructively, 21selections, 94
8-bit channels, 176-177Exposure adjustment with, 199
ellipsesfor layer mask borders, 249with Standard Shape tool, 230
Elliptical Marquee tool, 79Embed Color Profile, Macintosh, 393embedding
ICC color profiles, 434proof profile information, 29
Emboss style. See Bevel and Emboss styleemulating color systems, 432encoding images for press, 403EPS files, 391
inserting images in, 17metadata information, adding, 395text saved as, 309
Equalize command, 208Eraser tools, 215, 236-237
Background Eraser tool, 236-237basic Eraser tool, 236with Foreground and Background
colors, 216to History brush, 139Magic Eraser tool, 238
exact colors for Indexed color mode, 184Exclusion Blending Mode, 148EXIF profile tag, ignoring, 57exiting Photoshop, 32Export Layers To Files command, 124exporting. See importing and exportingexposure
controlling, 30Exposure adjustment, 199
Extension Manager, 520Extract, 331eyedroppers, 87
for Background colors, 216-217for Foreground colors, 216-217with Save For Web command, 446with Vanishing Point tool, 155
FF-Stop information, 394fades, 331
with Match Color adjustment, 203with Smart Sharpen filter, 163working with, 350
538
Feather optionwith layer masks, 248for out-of-gamut colors, 439
File Compatibility options, 28-29, 57file compression
lossy/lossless compression, 396-397understanding, 396-397
file extensionsfor droplets, 379lowercase, saving as, 29
file formats. See also specific typesdifferent file formats, saving documents
with, 392-393list of, 391understanding types of, 391
File Handling preferences, 51, 56-57files. See also droplets; importing
and exporting3D, 490-500actions as files, saving, 373File Handling preferences, 56-57
Fill command, 194-195Content-Aware fill, 100-101for paths, 265with paths, 280
fillscolors, changing, 322Layers panel option, 104with Paint Bucket tool, 235for Stroke layer style, 295
Filter Controls, Image Gallery dialog box,332
Filter Gallery, 332-333multiple filters, applying, 335
Filter Selection, Image Gallery dialog box,332
filters, 331-358. See also specific typeson adjustment layer masks, 151categories of, 332channel masks controlling effects,
352-353Fade command with, 350gradient masks with, 352-353for layer mask borders, 249Lens Correction filter, 156-157multiple filters, applying, 335order for applying, 335Photo Filters, 207, 346
in Quick Mask Mode, 263selections, controlling filters with, 351shortcut for reapplying, 333various filter effects, 356-358watermarks, embedding, 331, 354-355
Find and Replace, 307, 319with Bridge, 508-509
Find Edges filter, 350FireWire
Scratch Disks with, 53video preview option, 14
Fish style of warped text, 316Fisheye style of warped text, 316Fit Image command, 422Fixed Aspect Ratio
with Elliptical Marquee tool, 79with Rectangular Marquee tool, 78
Flag style of warped text, 316Flash. See SWF filesflow
for Airbrush tool, 225for Paintbrush tool, 225
fontsCharacter panel selections, 312-313neon effects for, 298of notes, 45preferences, 54types of, 311Type preferences for, 70Type tool, working with, 310
foregrounds, 216-217default and switching of, 217with Paint Bucket tool, 235
freeform bounding box, 17Free Transform command, 96Freeform Pen tool, 270-271FreeHand, moving shapes to, 233freezing with Liquify, 337fresco filter effect, 356Full Screen Mode, 37Fuzziness slider, 87
Ggamut. See also out-of-gamut
preferences, 61Gamut Warning, 181, 382, 442
mask, 61
Index 539
Gaussian Blur filter, 160on adjustment masks, 151with channel masks, 259, 261with layer masks, 248, 249Smart Sharpen filter with, 162
General preferences, setting, 54-55geometry
with Custom Shapes tool, 232with Line tool, 229paths, complexity of, 270with Standard Shape tool, 230
GIF files, 381, 448. See also animated GIFscreating, 458-459clipart for Web, preparing, 398-399compression of, 396-397metadata information, adding, 395opening images, 16optimizing GIF documents, 452-453Save For Web command with, 444saving documents as, 28for Web images, 443
glass filter effect, 357Global Light option
for Bevel and Emboss style, 291with Drop Shadow style, 288
Gloss Contours for Bevel and Emboss style, 291
glowing edges filter effect, 357Gradient Map adjustment, 206Gradient Overlay, 285Gradient tool, 11gradients, 215
creating, 239customized gradients, 240-241with filters, 352-353for Inner Glow style, 301for Outer Glow style, 299pre-defined gradients, adding, 239with Stroke layer style, 295
grain filter effect, 358graphic pen filter effect, 358gray. See also Grayscale color mode
with layer masks, 244, 246Grayscale color mode, 13, 179
Channel Mixer adjustment with, 205Color Slider, 190converting images to, 182
Duotone color mode and, 187patterns, generation of, 349Spectrums or Ramps, 191working with, 182
grid size, 64-65transparency grid size, 61
groupsadjustment layers, grouping, 146nested layer group, creating, 109
Guides, Grids & Slices options, 64-65guides for 45 degree angles, 80
Hhalftone screens for press images, 403Hand tool
with Lens Correction filter, 156with Liquify, 337monitor, fitting image to, 40moving images, document window, 41with Save For Web command, 446with Vanishing Point tool, 155
Hard Mix Blending Mode, 148hard proofs, printing, 430-431hardware color calibration, 425HDV Anamorphic Pixel Aspect Ratio, 15Healing Brush tool, 168
with Reduce Noise filter, 153, 168height values
Fit Image command, 422with Pattern Maker filter, 349print size option, 383
Help menuupdates, checking for, 25using, 26-27
hiding. See showing/hidingHigh Dynamic Range (HDR) images, 176-
177, 210-211Exposure adjustment with, 199Merge images to, 418-419
highlightsfor Bevel and Emboss style, 291with Dodge and Burn tools, 167Shadow/Highlight adjustment, 212tonal range, controlling, 172-173
Histogram panel, 174for levels, 173
540
History brush, 127combining with History states, 136correcting mistakes with, 136Eraser tool to, 139layers with, 139snapshots, working with, 137
History panel, 127-139. See also snapshotslinear history, 127, 130
resetting to, 140multiple undo commands, 128non-linear state of, 127, 130-131purging RAM, 140saving RAM, 133setting options in, 128-129
History states, 52, 68controlling, 140duplicating, 128, 133History brush combined with, 136number, setting, 128purging, 131, 140reviewing text file, 135saving, 134
Horizontal Type Mask tool, 323Hot keys. See shortcut keysHSB (hue, saturation, brightness)
Brightness/Contrast adjustment, 175, 200Color Slider, 190Hue/Saturation adjustment, 202opacity of, 148Replace Color command and, 189
HTML (Hypertext Markup Language) filesgenerating, 449
hue. See HSB (hue, saturation, brightness)Hue/Saturation adjustment, 202
for out-of-gamut colors, 438-439hyphenation
Character panel selections, 313Paragraph panel selections, 314
IICC Profile
embedding ICC color profiles, 434information, embedding, 29for JPEG images, 451Windows, 393
Illustrator, 218inserting images in, 17
paths, exporting, 265, 283-284Pen tools in, 269scripts, using, 376-377shapes to Illustrator, moving, 233
image cache, 51preferences, 53
image compression, 381Image Gallery dialog box, 332Image menu, Adjustments option, 141Image Preview, Image Gallery dialog box,
332Image Processor, 420-421image pyramid, saving, 405images, with bit depth (8, 30, and 32),
176-177importing and exporting. See also paths;
SWF filesdigital camera, raw data from, 18-19layers to files, exporting, 124shapes to vector, exporting, 233video, 474-475Zoomify, 476
inches as measurement system, 33Include All Subfolders command, 378indents
Paragraph panel selections, 314with Standard Shape tool, 231
InDesign, 70adjustment layers, opening, 142clipping paths in, 265EPS documents, type information in, 309
indexed color mode, 179converting image to, 184-185
Inflate style of warped text, 316Info panel, 46
changing measurement of colors in, 47color markers, creating, 46displaying information in, 47specific size object, creating, 46
ink density. See densityinkjet printers
getting the best results for, 404-405resolution, understanding, 406
Inner Glow style, 300-301Inner Shadow style, 298-299Insert Menu command with actions, 375inserting images in documents, 17installing Photoshop, 2-3
Index 541
intellectual property, protecting, 331, 354-355
interfacepreferences, 58-59
interlacingfor GIF images, 453for PNG-8 documents, 455for PNG-24 documents, 456
Internet. See also Web design; Web images; Web sites
help on, 26-27saving files for, 28updates, checking for, 24
interpolation, 22-23, 54, 266press, images for, 403
invertingcommand, 208Lens Blur filter option, 345textures, 293
IPTC Contract, 394
Jjitter
for Inner Glow style, 301Liquify tool option, 338for Outer Glow style, 299
JPEG files, 381, 391, 448compression of, 396-397JPEG 2120 format, 401layers exported as, 124metadata information, adding, 395opening images, 16optimizing JPEG documents, 450-451photographs for Web, preparing, 400-401printers, preparing images for, 405raw images saved as, 18Save For Web command with, 444saving documents as, 28transparency, support for, 61for Web images, 443
justificationParagraph panel selections, 314of text, 309, 311
Kkerning, 312keyboard. See also shortcut keys
paths, moving, 274Kuler panel, 66
LLab color mode, 13, 179
Color Slider, 190converting image to, 186patterns, generation of, 349
landscape orientation, 382large files, saving, 22, 57laser printers, preparing images for,
404-405Lasso Marquee tool, 81Lasso tools. See also specific tools
Lasso Marquee tool, 81for layer mask borders, 249Magnetic Lasso tool, 82-83Polygonal Lasso tool, 81-84
launching Photoshop, 4-5Layer Comps panel, 123layer masks, 104, 243
borders, creating, 249creating, 245modify, 251Paint tools with, 246role of, 244selections generating, 247soft transparency, generating, 248type masks, combining with, 328-329as white, 246
Layer Properties dialog box, 122Layer Style dialog box, 287
customized styles with, 302-303layer styles, 285-306. See also specific
stylesadding, 287combining layer style elements, 302customized styles
with Layer Style dialog box, 302-303with Styles panel, 304-305
to masked images, 247modifying existing layer style, 287moving existing layer styles, 306names for, 303, 305saving customized styles, 304sharing, 305showing/hiding, 287
542
layer styles (continued)single layer styles, moving, 306understanding, 286
layers, 103-125. See also adjustment layers;backgrounds; layer masks; layerstyles; linked layers; opacity; Typetool
active document, adding layers to, 106blending modes, 118comps, creating, 123copying, 95, 120
elements in layers, 111deleting, 104, 121
linked layers, 121designation of, 105different file formats, saving documents
as, 393dragging layer thumbnails into
documents, 44Eraser tools with layered documents,
236exporting as files, 124History brush, multiple layers with, 139locking, 114Magic Eraser tool with, 238Merge options with, 116moving, 106
documents, layers between, 115two open documents, moving layers
between, 44names for, 114, 122nested layer group, creating, 109new layers, creating, 106-107opacity, 119pasting, 95properties, changing, 122saving, 28selecting layer options, 107selecting methods, 108selections from layers, creating, 110-111showing/hiding, 114Smart Objects, converting, 21stacking order, changing, 114two open documents, moving layers
between, 44updating layer comps, 123
Layers panel, 104. See also layerscontrolling image information with, 114setting options, 125
thumbnail size, changing, 125tonal range, controlling, 172-173
leading Character panel selection, 313left justification, 311length with Line tool, 229Lens Blur filter
brightness with, 155, 345Smart Sharpen filter with, 162working with, 344-345
Lens Correction filter, 156-157Levels adjustment, 172-173
for actions, 364with channel masks, 257with type masks, 325working with, 198
libraries, Preset Manager for, 71Line tool, 229
45 and 90 degree angles, 229linear history. See History panellines. See straight linesLink Layers option, Layers panel option, 104linked layers, 114
with composite adjustment layers, 145creating, 114, 117deleting, 121with Pattern Overlays, 297textures, linking, 293unlinking, 117
Liquify, 331mask options, 340meshes
applying, 343creating, 342modifying loaded meshes, 343Show Mesh option, 341, 342
modifying images with, 336options, working with, 338-339saving meshes, 343Show Mesh option, 341, 342view options, 341
Load Mesh button, 342loading
channel masks, 258-259meshes, 342
localized color cluster, 87, 189locking layers, 114
Layers panel option, 104
Index 543
locking ruler guides, 49lossless compression, 396-397
printers, preparing images for, 404-405lossy compression, 396-397
for GIF images, 453luminosity
with Match Color adjustment, 203Photo Filter option, 346
LZW filescompression of, 397printers, preparing images for, 405
MMacintosh
color calibrator in, 424Embed Color Profile option, 393Print Settings in, 389printers, preparing images for, 405printing documents in, 386-387
Magic Eraser tool, 238Magic Wand tool, 86
channel masks, creating, 255Magnetic Lasso tool, 82-83
with paths, 271Make Work Path button, 267marching ant marquee, 264margins
in Macintosh Page Print Settings, 389Paragraph panel selections, 314in Windows, 389
Marquee tools, 77. See also EllipticalMarquee tool; Rectangular Marqueetool
Lasso Marquee tool, 81Single Row/Column Marquee tools, 80type masks, creating, 323with Vanishing Point tool, 154
masks, 104. See also channel masks; layermasks; Quick Mask Mode; selections;Type tool
with adjustment layers, 150-151clipping masks, creating, 107Liquify mask options, 340Standard Mask Mode, 262Match color adjustments, 175, 203modify, 251vector masks, 244, 250, 251
Mask Edge button, 248
match prints, printing, 430-431matte option
clipart for Web, preparing, 398for GIF documents, 453for indexed color mode, 184for JPEG images, 451photographs for Web, preparing, 400for PNG-8 documents, 455for PNG-24 documents, 456for Web design, 445
maximize compatibility, saving, 28-29, 57measurements
Rulers, 48-49system for, 33
Measurement Log panelcounting, 478-479taking measurements, 480-481
memory. See also RAM (random access memory)
100 percent Memory Usage option, 69preferences, setting, 68-69
Memory & Image Cache preferences, 68-69menus
color preferences for, 55customizing, 74-75original settings, restoring, 74
Merge Down option, 116Merge Image to HDR Pro, 210-211, 418-419Merge Visible option, 113, 116merging. See also adjustment layers
Merge Down option, 116Merge Visible option, 113, 116Photomerge, 416-417
meshes. See Liquifymetadata, 13
adding to files, 395with Bridge, 509
matte optionfor GIF images, 453for JPEG images, 451for PNG-8 documents, 455for PNG-24 documents, 456
metadata, 509Microsoft ICM color management, 436midtones
with Dodge and Burn tools, 167Shadow/Highlight adjustment for, 212tonal range, controlling, 172-173
544
Mini Bridge, 513mirroring with Liquify, 337Mixed Brush tool, 226mode
for Airbrush tool, 225color, 13, 179Conditional Mode Change command,
410with Custom Shapes tool, 232for gradients, 239with Line tool, 229for Paint Bucket tool, 235for Paintbrush tool, 225for Pencil tool, 227
monitors. See also color managementautomatically fitting image to, 40calibrating, 425resolution, understanding, 406selecting areas for, 78soft-proof colors, setting up, 426-427
monochromatic optionwith Add Noise filter, 152with Lens Blur filter, 345
mosaic tiles filter effect, 358Motion Blur filter
Add Noise filter with, 152Smart Sharpen filter with, 162
mouse movements in actions, 375Move Grid tool, 156Move tool, 11
with Vanishing Point tool, 154moving. See also layers; paths
adjustment layers, 143anchor points in paths, 272with Bridge, 508-509channel masks between documents, 260Document window, moving images in,
41layer styles, 306with Vanishing Point tool, 154-155
Multi-Channel color mode, 179, 188multi-layered documents into backgrounds,
converting, 113Multiply blending mode
with layers, 118, 148with Pattern Overlays, 296
Nnames. See also renaming
for action sets, 374for custom preset document, 12of data driven graphics, 474droplets, naming options for, 379for gradients, 240for layer styles, 303, 305for layers, 114, 122
native color channels, channel masks from,256-257
native formats, 452Navigator panel. See also zooming
area of view, changing, 35color of view box, changing, 36shortcuts, 34size of view, changing, 34thumbnails, sizing and zooming, 35-36
Nearest Neighbor method, 54neon effects, 298nested layer group, creating, 109New Document Preset Resolutions, 62-63new documents
creating, 12preset resolutions, 62-63with presets, 14
New Layer dialog box, 107New Layer Effect button, 335noise
Add Noise filter, 152with brush tips, 221for Drop Shadow style, 289for Inner Glow style, 300for Outer Glow style, 298Reduce Noise filter, 153
nondestructive editing, 21non-linear state of History panel, 127, 130-
131non-squared pixels, 15note paper filter effect, 357notes, 45
different file formats, save as, 393saving, 28, 45
Ooffset with Pattern Maker filter, 349on-image controls, 213, 517-520
Index 545
opacity, 61with adjustment layers, 148-149for Airbrush tool, 225with Art History brush, 138for Bevel and Emboss style, 291for Color Overlay style, 294with Custom Shapes tool, 232for Drop Shadow style, 288of gradients, 241for Inner Glow style, 300Layers panel option, 104Liquify view option, 341for Outer Glow style, 298for Paintbrush tool, 225with Pattern Overlays, 296for Pencil tool, 227setting, 107, 119for Stroke layer style, 295
OpenEXR files, 391OpenGL, 68-69, 490Open As command, 16opening images, 16Optimize To File Size option, 447optimizing
image to file size, 447Photoshop, 52-53
Options bar, 6, 11organizing documents, 393outline font, 311output options, printing, 384-385out-of-gamut, 61, 181
command, test, 442Hue/Saturation Adjustment for, 438-439Sponge tool, working with, 440-441
Out of Scratch Disk Space error, 53Outer Glow style, 286
working with, 298-299output options, setting
setting, 468-469saving, 468-469
Overlay blending mode with Pattern Overlays, 296
Override Action "Open" commands, 378
PPage Setup, in Print Settings, 389Paint Brush tool, 77
Paint Bucket tool, 11, 235Paint tools, 10, 215
with layer masks, 246Paintbrush, 225
with layer masks, 246as Stroke tool, 281
painting. See also gradientsadjustment layers, opening, 142on adjustment masks, 150cursor options, 60
painting engine. See Brush panelpanel knife filter effect, 356panels, 6. See also specific types
adding panels, 7-9customizing, 72-73preferences for, 55showing/hiding, 7-9, 37subtracting panels, 7-9working with, 7-9workspaces, 72-73
panoramic photographs, creating, 416-417Pantone Color Matching System, 423paper options, 389, 387Paragraph panel, 72-73
showing/hiding, 311working with, 313, 314
Paste, preferences for resizing, 55pasting, selection, 95Patch tool, 168-169
with Reduce Noise filter, 153patches, checking for, 24-25Path Selection tool, 274
type path, reshaping, 330paths, 284. See alsoType tool
anchor pointsadding, 272curved to straight points, converting,
277deleting, 272-273direction lines, modifying, 276with Magnetic option of Freeform Pen
tool, 271modifying, 274moving, 272straight to curved points, converting,
277clipping paths, 265
working with, 278-279
546
paths (continued)complexity of path, controlling, 270curved to straight points, converting, 277deleting anchor points, 272-273direction lines, modifying, 276Fill command with, 265, 280Freeform Pen tool, 270-271
Magnetic option, using, 271Illustrator, exporting paths to, 283-284keyboard, moving path with, 274Magnetic option of Freeform Pen tool,
using, 271moving
anchor points, 272keyboard, moving path with, 274
Paths To Illustrator command, exportingpaths with, 284
Pen tools with, 265, 268-269Save As, exporting paths with, 283selections into paths, converting, 267shapes as paths, creating, 282straight to curved points, converting, 277Stroke command with, 265, 281
Paths panel, 265Paths To Illustrator command, 284Pattern Maker, 331, 348-349Pattern Overlays, 285
repositioning, 297working with, 296-297
patternswith Paint Bucket tool, 235for Stroke layer style, 295for texture, 293
pauses in actions, 368PBM files, 391PCX files, 391PDAs (personal digital assistants), 180
RGB (red, green, blue) color with, 428PDF files, 391, 407
creating, saving, 414-415format, 415inserting images in, 17layers exported as, 124metadata information, adding, 395multi-page PDFs to PSDs, converting,
412-413PSD file, converting to, 412-413types of, 414
PDF presentations, 391, 407creating, 414-415
PDF presetscreating, working, 415
Pen toolsin Illustrator, 269with paths, 265, 268-269
Pencil tool, 227Auto Erase and, 228for calligraphy lettering, 227
perceptual rendering intent, 429Performance, 52-53, 68-69, 490-491Perspection Web site, 11perspective of Transform command
selection, 97Photo Filters, 207, 346photographic manipulation, 166photographic restoration, 152photographs for Web, preparing, 400-401Photomerge, 416-417
command, 407Photoshop Extended
3D files, 490-500Align layers, Auto, 482-483Angle, Vanishing Point, 154Blend layers, Auto, 482-483Count tool, 478-479Count tool, preferences, 64-65Enable 3D Acceleration, 69Measurement feature, 154, 478-481MPEG-4 video, 474Timeline view (mode), 460video layer
cloning, 489creating, 485modifying, 486-487splitting, 488
picas as measurement system, 33PICT files, 391Pincushion distortion, 156-157Pixar files, 391Pixel Aspect Ratio Correction, 15pixelization, 13pixels, 13. See also adjustment layers;
raster dataAdd Noise filter, working with, 152of data driven graphics, 474of data sets, 473
Index 547
Equalize command, 208with Eraser tool, 216excess pixels, deleting, 44Histogram panel, information in, 174image interpolation, 54large files, saving, 22Magic Eraser tool with, 238as measurement system, 33non-squared pixels, 15resolution, understanding, 406with RGB (red, green, blue) color, 428Smart Sharpen filter, 162-163Unsharp Mask filter, 161
Place commandinserting images in documents with, 17preferences for resizing, 55
plastic wrap filter effect, 358Play button, Actions panel, 361play options, 378playback of command, controlling, 365plug-ins, 66-67
organizing, 66Plug-Ins and Scratch Disks preferences, 66-
67PNG-8 files
information on, 397optimizing PNG-8 documents, 454-455saving for the Web, 444-445
PNG-24 filesinformation on, 397optimizing PNG-24 documents, 456saving for the Web, 444-445
PNG files, 391clipart for Web, preparing, 398-399compression of, 396-397layers exported as, 124metadata information, adding, 395opening images, 16Save For Web command with, 444-445saving documents as, 28for Web images, 443
Polygonal Lasso tool, 81-84polygons
Polygonal Lasso tool, 81-84with Standard Shape tool, 230
portrait orientation, 382position for Stroke layer style, 295Posterize adjustment, 209
PostScript type size, 48, 70precise cursor options, 60preferences, 51
cursors preferences, 60File Compatibility options, 28-29, 57File Handling preferences, 56-57gamut preferences, 61General preferences, 54-55Guides, Grid & Slices preferences, 64-65interface preferences, 58-59Memory & Image Cache preferences,
68-69Performance, 52-53, 68-69, 490-491plug-ins preferences, 66scratch disks preferences, 673D preferences, 490-491transparency preferences, 61Type preferences, 70Units & Rulers preferences, 62-63
Preset Manager for libraries, 71presets
new documents with, 14Preset Manager, 71saving items and, 71tools, 50
press, preparing images for, 402-403previewing
fonts, 70, 310-311Lens Blur filter option, 345non-squared pixels, 15press, images for, 403with Save For Web command, 446transparency settings, 61with Unsharp Mask filter, 161video preview option, 14
Print One Copy command, 390Print dialog box with preview, 382-383printers. See also Windows
calibrating, 425converting color space to another
profile, 436preparing images for, 404-405
printingGamut Warning, 382hard proofs, 430-431larger images, 390Macintosh, documents in, 386-387one copy of document, 390
548
printing (continued)output options, 384-385Print dialog box with preview, 382-383Show Paper White, 382Windows, documents in, 386
problems, reporting, 25progressive option
for JPEG images, 451photographs for Web, preparing, 401
proof profile information, embedding, 29Proof Setup, Windows, 393Protect Texture option, 221Protect Tones, 167, 440PSB files, 391
opening images, 16PSD files, 391
adjustment layers as, 142creating, 414-415
as a presentation, 415large files, saving, 22layers exported as, 124metadata information, adding, 395multi-page PDFs to PSDs, converting,
412-413opening images, 16PDF files, converting, 412-413preferences for saving, 57raw images saved as, 18
puckering with Liquify, 336Puppet Warp tool, 98purging RAM, 131, 140pushing left with Liquify, 336
QQuarkXpress, 278
EPS documents, type information in, 309Quick Mask Mode, 264, 262
filters in, 263options, working with, 263saving selections, 263
Quick Selection tool, 85
RRadiance files, 391radius option, 158-159, 161-163, 231, 345RAM (random access memory), 51. See
also History panel; History states
adjusting options, 68-69optimizing, 53purging RAM, 131, 140
ramps, 191range values
for Bevel and Emboss style, 292for Inner Glow style, 301for Outer Glow style, 299
raster data, 406. See also Layers panelchange and, 381documents, 13interpolation and, 266Smart Objects with, 21understanding raster images, 266
Rasterize Type command, 320raw digital camera data, importing, 18-19RAW files, 18-19, 391
large files, saving, 22reconstructing with Liquify, 336, 339Record button, Actions panel, 361recording actions, 363Rectangle tool for layer mask borders, 249rectangles
with Rectangle tool, 249with Standard Shape tool, 230
Rectangular Marquee tool, 78with Pattern Maker filter, 348
RedEye tool, 171Reduce Noise filter, 153
with Healing Brush tool, 153, 168reduction
for GIF documents, 452for PNG-8 documents, 454
Refine Edgeselection, 88-89with Layer Masks, 248
relative colorimetric rendering intent, 429remove option with Smart Sharpen filter,
162renaming
with Bridge, 512presets, 71
rendering intentfor hard proofs, 431for soft-proof colors, 426working with, 429
reopening notes, 45repeating Transform command selection, 97
Index 549
Replace Color command, 189Repoussé, 3D models, 492, 494-495Resample Image option, 22resizing. See sizeresolution
changing, 22-23selecting, 13understanding, 406
retouching images, 166RGB (red, green, blue) color, 13, 47, 179.
See also color management; out-of-gamut
CMYK (cyan, magenta, yellow, black)color and, 179, 428
Color Slider, 190converting image to, 180with 8-bit channels, 176-177Gamut Warning mask, 61Lab color mode for archiving images,
186Multi-Channel color mode, converting
images to, 188patterns, generation of, 349press, preparing images for, 402-403Spectrums or Ramps, 191
right justification, 311Rise style of warped text, 316RLE (Run Length Encoding) scheme, 398Rotate View tool, 41rotating
with Bridge, 508-509with Lens Blur filter, 345Smart Objects, 21Transform command selection, 97
roughness of gradients, 241rows. See columns and rowsrulers, 48-49, 51
guides, working with, 48-49options for, 62-63switching between measurements, 62
SSaturate and Desaturate command, 175saturation. See also HSB (hue,
saturation, brightness)rendering intent, 429Saturate and Desaturate command, 175
Save As command, 29
paths exported with, 283with text, 311
Save commands. understanding, 29
Save For Web command, 444-445Save for Web dialog box, 447Save Mesh button, 342Save Optimized As command, 449saving. See also actions; layer styles
alpha channels, 28brush tips, 224channel masks, 258-259custom shape sets, 234documents, 28-29file formats, files with different, 392-393File Saving options, selecting, 56gradients, 240-241History states, 134image pyramid, 405inserting file information into docu-
ments, 394-395large files, 22, 57layer styles, 304layers, 28Liquify meshes, 343maximize compatibility, saving, 28-29, 57notes, 28, 45presets, items as, 71Quick Mask selections, 263spot colors, 28Swatches panels, 193thumbnail data, 29understanding Save commands, 29for Web, 444-446
scalingContent-Aware scaling, 99Character panel selections, 313with Pattern Overlays, 297in Print dialog box with preview, 383Smart Objects, 21for texture, 293Transform command selection, 97
scannerscalibrating, 425noise from, 153photographs for Web, preparing, 401Photoshop, scanning images into, 17
Scattering, 218, 221
550
Scratch Disks, 51, 53, 66-67scratch sizes, 30
Info panel displaying, 47Screen blending mode, 148
with Pattern Overlays, 296Screen Mode for display, 37scripts
built-in scripts, 377enhanced scripting, 376-377
scroll wheel preferences, 55SCT files, 391searching. See Find and ReplaceSelect menu options, 94selection marquees, hiding, 441selection masks, 92-93selections, 10, 77-101. See also specific tools
adding to, 90Brightness/Contrast adjustment with, 199channel masks from, 255channels, creating with, 92by color range, 87cropping selections, 91filters, controlling, 351with Free Transform command, 96layers, 108layer masks, generation of, 247layer options, selecting, 107masks, 92-93, 151
layer masks, generation of, 247modifying existing selection, 94paths, converting to, 267Quick Mask option, 264Quick Selection tool, 85Refine Edge, 88-89subtracting from, 90with Transform command, 96-97
Selective Color adjustments, 175, 204sepia color, Fill blending with, 195sets. See actionsShadow Angles option with Drop Shadow
style, 288Shadow/Highlight adjustment, 212shadows
for Bevel and Emboss style, 291with Dodge and Burn tools, 167Shadow/Highlight adjustment, 212tonal range, controlling, 172-173
Shape Blur filter, 158-159
Shape Dynamics, 218, 221shape layers, 105
drawing option, 282Shape Marquee tools, 11Shape tool, 215shapes
Custom Shapes tool, 232-234Lens Blur filter option, 345paths, creating shapes as, 282with Standard Shape tool, 230-231Type tool, creating shape layers with,
322Share My Screen, 502, 515sharing
actions, 373layer styles, 305
Sharpen tool, 164Shell Lower/Upper style of warped text, 316Shift key for tools, 11shortcut keys, 3, 4
defining new, 76filters, reapplying, 333list of, xixwith Navigator panel, 34for tools, 11working with, 76zooming with, 39
Show Bounding Box check box, 382Show Paper White, 382showing/hiding
channel masks, 253Character panel, 311layer styles, 287layers, 114Navigator panel, 35panels, 7-9, 37Paragraph panel, 311selection marquees, 441toolbox, 37
shutter speed information, 394Single Row/Column Marquee tools, 80size
adjustment layers and, 141for Bevel and Emboss style, 290of CMYK document, 179of documents, 30for Drop Shadow style, 289image size, changing, 22-23
Index 551
Info panel, information in, 46, 47for Inner Glow style, 301for Outer Glow style, 299photographs for Web, preparing, 401preferences for resizing, 55for Stroke layer style, 295view size, changing, 34
sketch filters, 332skewing Transform command selection, 97Slice Selection tool
with Save For Web command, 446slicing images, 462-463
arranging, 466-467distributing, 466-467HTML text, add, 470-471saving for the Web, 468-469setting output options, 468-469stacking, 466-467URL, add Web address, 470-471working with, 64-65, 464-465
slide shows, 414-415sliders, changing text boxes to, 74Smart Filters
Creating, 334Smart Objects, from, 20-21Working with, 334
Smart Guides, 126Smart Objects, 20-21
converting 3D layer to, 21Smart Sharpen filter, 162-163smoothness
of gradients, 241with painting engine, Brush panel, 221
Smudge tool, 164snapshots, 128
creating, 132with History brush, 137
softnessfor Bevel and Emboss style, 290channel masks, 259layer masks generating soft
transparency, 248soft-proof colors, setting up, 426-427
software color calibration, 425sounds, preferences for, 55source option for Inner Glow style, 301spacing Paragraph panel selections, 314
Spatter filter, 358for layer mask borders, 249
specific size object, creating, 43spectrums, 191speed of Photoshop, adjusting, 68-69Spell Check, 307
Character panel selections, 313working with, 318
Sponge tool, 167desaturating areas of image with, 202for out-of-gamut colors, 440-441
spot colors, 196different file formats, saving documents
as, 393saving, 28
Spot Healing Brush tool, 170Content-Aware fill, 100-101
spread valuesfor Drop Shadow style, 289for Outer Glow style, 299
squares with Standard Shape tool, 230Squeeze style of warped text, 316stacking images, 482stacking order of layers, 114stained glass filter effect, 358stamp filter effect, 357Stamp tool
Clone Stamp tool, 166with Vanishing Point tool, 154
Standard Mask Mode, 262Standard Pen tool with paths, 268Standard Screen Mode, 37Standard Shape tool, 230-231
Options bar, 11stars with Standard Shape tool, 231Status bar, 30Stop button, Actions panel, 361straight lines
drawing, 220Line tool for, 229Pencil tool for, 228
Straighten tool, 156Stroke command, 194
for paths, 265with paths, 281
Stroke layer style, 295Stroke Path option, 281
552
styles. See also layer stylesfor Art History brush, 138for Bevel and Emboss style, 290
Styles button for warping text, 316Styles panel, 285
layer styles, creating, 304-305stylize filters, 332subfolders
in Batch File Processing, 405Include All Subfolders command, 378
subtracting from selection, 90Suppress Color Profile Warnings, 378Suppress File Open Options Dialogs, 378Surface Blur filter, 158-159Swatches panel, 192-193
customizing, 193saving, 193
system requirements, 3
Ttablecloth, 61Targa files, 391
layers exported as, 124technique
for Bevel and Emboss style, 290for Inner Glow style, 301for Outer Glow style, 299
text, 33. See also anti-aliasing; notes; SpellCheck; Type tool; warping
Asian text options, 70chiseled text, creating, 300of data sets, 473History state text files, reviewing, 135Rasterize Type command, 320workspace for, 72-73
text boxes to sliders, changing, 74textures, 218, 221
with Bevel and Emboss style, 292-293filters, 332Protect Texture option, 221
thawing with Liquify, 33732-bit images, See also High Dynamic
Range (HDR) images3D effects, Bevel and Emboss style for, 2903D model files
adding to a 2D model, 492-495browsing for 3D content, 500
converting 3D layer to Smart Object, 21creating
from a 2D image, 492from a grayscale image, 492from a multi-frame file (3D Volume),
492using repoussé, 492, 494-495from a shape preset, 496
editing a model, 498-499preferences, 490-491render settings, 497repoussé, editing, 494-495
threshold, 209with Lens Blur filter, 345with Surface Blur filter, 158-159with Unsharp Mask filter, 161
thumbnails. See also Navigator panelwith Bridge, 13in Brush Presets panel, 219dragging layer thumbnails, 44file saving options, 56Layers panel thumbnail size, changing,
125with Save For Web command, 446saving thumbnail data, 29
TIFF files, 391adjustment layers as, 142large files, saving, 22layers exported as, 124metadata information, adding, 13, 395opening images, 16photographs for Web, preparing, 400-401preferences for saving, 57printers, preparing images for, 404-405raw images saved as, 18
tile boundaries with Pattern Maker filter,349
tolerancefor Art History brush, 138with Paint Bucket tool, 235for paths, 267
tonal valuescontrolling, 172-173Histogram panel and, 174Invert command for, 208with Smart Sharpen filter, 163with Surface Blur filter, 158-159
tool tip preferences, 55
Index 553
toolbox, 6showing/hiding, 37
tools. See also specific toolsmultiple tools, accessing, 10working with, 10-11
tracking Character panel selections, 313Traditional type size, 48transfer functions for press images, 403Transform command, 96-97
with Vanishing Point tool, 154transparency. See also layer masks
clipart for Web, preparing, 398clipping paths and, 278-279for GIF documents, 453for gradients, 239gray creating, 244, 246with History brush, 139for JPEG images, 451layer styles requiring, 286for PNG-8 documents, 455for PNG-24 documents, 456preferences, 61printer, preparing images for, 405soft transparency, generating, 248for Web design, 445
turbulence with Liquify, 337turning on/off Smart Guides, 126twirling with Liquify, 336Twist style of warped text, 316Type preferences, 70Type tool, 10, 307-330
chiseled type, creating, 326-327editing type on path, 309fonts, working with, 310-311horizontal and vertical type, toggling
between, 310layers, creating, 105, 322maskschiseled type, creating, 326-327creating type masks, 323layer masks, combining with, 328-329pixels, isolating, 324-325special effects, generating, 328-329moving type mask, 324options, working with, 310paths, 308-309, 321
text on path, creating, 330
work paths, creating, 321preferences for, 70Rasterize Type command, 320
Type toolshape layers, creating, 322special effects, generating, 328-329standard typing tools, 308-309
Uundos, 52. See also History panel
multiple undo commands, performing,128
unified color tablefor GIF images, 453for PNG-8 documents, 455
units, 51. See also rulersoptions for, 62-63
Unsharp Mask filter, 161Updater, 24-25updates
checking for, 24-25from Internet, 24layer comps, updating, 123options, setting, 4for versions of Photoshop, 2
user interface, customized, 74-75
VVanishing Point tool, 154-155vector data
interpolation and, 266Paths panel and, 265press, images for, 403Smart Objects with, 20-21understanding vector images, 266
vector masks, 244, 250, 251Vertical Type Mask tool, 323vibrance, 177, 202video
exporting, 474-475layers, cloning, 489layers, creating and modifying, 485-486layers, splitting, 488new documents with video presets, 14opening, formats, 484preview option, 14
554
views and viewing. See also Navigatorpanel
Bird’s Eye view, 38-39with Bridge, 504, 508-509for Brush Presets panel, 219Liquify view options, 341Photoshop window, 6RGB color mode, 13, 179size of view, changing, 34two views, working on one image in, 43Zoom tool, changing view with, 38-39
vignettesLens Correction filter, vignetting and, 156
visibilityof data driven graphics, 474of data sets, 473
WWarped Text button, 311warping
with Liquify, 336Smart Objects, 20-21text, 311, 316-317Transform command selection, 97
watermarksembedding, 331, 354-355restricted, 355
Wave style of warped text, 316WBMP files
optimizing WBMP documents, 457Save For Web command with, 444-445for Web images, 443
Web Content panel, 469Web design, 443-478.
file formats, working with, 454-449optimizing image to file size, 447saving documents for, 444-446
Web imagesclipart, preparing, 398-399Color Slider, 190lossy/lossless compression, 396-397photographs for Web, preparing, 400-401preparing, 381
Web snapfor GIF documents, 452for PNG-8 documents, 454
Wet Edges, 221
width valuesFit Image command, 422with Line tool, 229with Pattern Maker filter, 349print size option, 383
Windowscolor calibrator in, 424ICC Profile, 393Microsoft ICM color management, 436Printer Settings in, 389printers
preparing images for, 404-405setting up, 389
printing documents in, 388Proof Setup, 393
workspace, using and customizing, 72-73WYSIWYG type, 70
XXMP files, 13
inserting file information into documents, 394-395
XMP Software Development Kit, 395
ZZIP files
compression of, 397printers, preparing images for, 405
Zoom tool, 33with Lens Correction filter, 156with Save For Web command, 446two views, working on one image in, 43with Vanishing Point tool, 155view of image, changing, 38-39
Zoomify, export, 476zooming, 6. See also Zoom tool
area of view, changing, 35with Liquify, 337monitor, automatically fitting image to,
40on multiple documents, 40with Navigator panel, 34-35100%, automatically zooming to, 40preferences for, 55with shortcut keys, 39