Administrator Course

TM001028E

Administrator Course

TM001028E

TM001028E

Content Of Administrator Course

•Log-On to VaporTracer2

•Menus

•Interfacing with a computer

•Advanced Menu Functions

TM001028E

Log On to VaporTracer2

0 0

MENU TO QUIT

- - - ENTER CODE - - -

0

- ENTER - TO ACCEPT

Enter PIN ‘Enter PIN ‘0-00-0--00’ to return to Operator mode’ to return to Operator mode

Administrator PIN is Administrator PIN is ******

Administrator Access

TM001028E

Menus

MENU2 CAL ON SUBSTANCECLEAN SECONDS 15INTEGRATION TIME 5SAMPLE TIME 2PLASMAGRAM

Defaults are set at the factory for optimal performance, and should not be altered without consulting GE IonTrack Technical Service!

Menu 2

TM001028E

Plasmagram

2 4 MS

1k

0

Configuration

COCAIN 7. 60 -0.08 +0.08

HEROIN 8.48 -0.04 +0.08

THC 8.40 -0.04 +0.04

METHAM 6.48 -0.08 +0.08

MDMA 6.08 -0.04 +0.04

EPHDRI 5.64 -0.04 +0.04

PEAKS

HEIGHT TIME (ms)

6629 3.083

1905 7.012

Menus

TM001028E

Menus

MENU3 ADJUST WINDOWSCAL FLOWSAVE RAWCONNECT IR

PKSWIRE

Menu 3

TM001028E

Interfacing with a Computer

Advanced functions can be accessed when interfaced with a computer. These include:• Downloading, viewing, and deleting alarm and plasmagram files• Advanced Menu Functions• Upgrading Software• Special Viewing Options

Advanced Functions

TM001028E

1.1. Insert the CD into the CD-Rom driveInsert the CD into the CD-Rom drive2.2. The installation dialog box will appearThe installation dialog box will appear3.3. Click on ‘Install ActiveSync 3.0’Click on ‘Install ActiveSync 3.0’4.4. Follow the prompts to complete installationFollow the prompts to complete installation5.5. At ‘Get Connected’ dialog box click ‘Cancel’At ‘Get Connected’ dialog box click ‘Cancel’6.6. Click ‘OK’ at the Microsoft dialog boxClick ‘OK’ at the Microsoft dialog box7.7. The installation dialog box will reappearThe installation dialog box will reappear8.8. Click on ‘Install ITMS software to control the VaporTracer2’Click on ‘Install ITMS software to control the VaporTracer2’9.9. The Software will install and the itms-vt Icon will appear on the computer The Software will install and the itms-vt Icon will appear on the computer

desktopdesktop

Installing Active Sync and ITMS


TM001028E

MENU3 ADJUST WINDOWSCAL FLOWSAVE RAWCONNECT IR

PKSWIRE


Connect

TM001028E

Active Sync icon located in the Task Bar. Shown dark (not connected)

The Task Bar will be located at the bottom, or right side of your computer screen.

Location of Active Sync iconInterfacing with a Computer

TM001028E

Select Select CancelCancel at the at the Partnership ScreenPartnership Screen

Press OK at the Press OK at the ‘‘Partnership Not Set Up’ screen.Partnership Not Set Up’ screen.


TM001028E

Log-on to itms-vt SoftwareInterfacing with a Computer

TM001028E

Log-On to itms-vt Software


TM001028E

Plasmagram and SelectScan

Plasmagram SelectScan


TM001028E

Press <G> on computer keyboard to retrieve files

Pressing OK on this dialog box will take you to “VT alarms” folder.

Retrieving Files


TM001028E

Deleting Alarm Files – Press Shift <E> on keyboard

Deleting FilesInterfacing with a Computer

TM001028E

Advanced FeaturesRecall and print files, print config

TM001028E

Alarm - ALM00000.sca - Opened

Press Menu, Recall & Press Menu, Recall & Select a downloaded file to Select a downloaded file to open.open.

Advanced Menu FunctionsRecalling Alarms

TM001028E

Advanced Menu Functions

Insert the upgrade disk into the computer CD Rom driveInsert the upgrade disk into the computer CD Rom drive Press <ALT-U> on the computer.Press <ALT-U> on the computer. When prompted, press the ENTER button on the VaporTracerWhen prompted, press the ENTER button on the VaporTracer22.. Click OK when the Click OK when the Upgrade NowUpgrade Now message appears. message appears. Once the upgrade has been completed, the VaporTracerOnce the upgrade has been completed, the VaporTracer22 will restart will restart

automatically.automatically.

Upgrading Software

TM001028E

Upgrading VaporTracer2 Software


TM001028E

• Options• Configuration• Substances• Notes• Manual Calibrate• Find Match• Recalled file views• Zoom Function


TM001028E

Administrator Menu Functions

Defaults are set at the factory and should not be altered without consulting GE

IonTrack Technical Service!

Advanced Menu FunctionsOptions

TM001028E

LabelsAdvanced Menu Functions

TM001028E


5

2

Configuration

TM001028E

Defaults are set at the factory and should not be altered without consulting GE

IonTrack Technical Service!

Advanced Menu FunctionsSubstances

TM001028E

Advanced Menu FunctionsNotes, Zoom, and Help

TM001028E

Calibrate, Find Match, and CancelAdvanced Menu Functions

TM001028E

Intensity Map Processed 3D

Advanced Menu FunctionsIntensity Map and Processed 3D

TM001028E

Zoom Function


TM001028E

•Log-On to VaporTracer2

•Menus

•Interfacing with a computer

•Advanced Menu Functions

Course Review

Administrator Course

Documents

Transcript of Administrator Course