Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the...
Transcript of Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the...
![Page 1: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/1.jpg)
Add Beacons Solo Platform
![Page 2: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/2.jpg)
This presentation document has been prepared by Vault Intelligence Limited (“Vault") and is intended for off line demonstration, presentation and educational purposes.
The information is not version controlled and as such is subject to change without notice.
Vault does not accept any responsibility or obligation to inform users of this presentation of such changes.
This includes any copies of this presentation taken and modified outside of the Vault domain.
[DISCLAIMER]
![Page 3: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/3.jpg)
Vault Solo uses GPS to ensure the safety of your workers, but things such as a workers location within a building can cause a GPS signal to be impaired.Beacon technology however allows you to maintain the safety of your workers even when GPS coverage is inadequate.
“Adding a Beacon” in Solo is the process of registering its specific location within your network and stipulating any messaging that may be required
Add Beacons Introduction
![Page 4: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/4.jpg)
This can be done in two ways.Via the manual methodorVia the import or bulk methodFirst, we’ll look at the manual method which is ideal for adding a small number of Beacons.
Add BeaconsMethods
![Page 5: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/5.jpg)
From Solo Platform’s landing page you must access the Beacons register in the setup area.
Which is located in the menu.
Add BeaconsMenu
![Page 6: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/6.jpg)
The Beacons register is split into two tabs:
‘All Beacons’ and ‘Beacon Groups’.
We’ll focus on the All Beacons tab which shows all current beacons and key information about each.
The ‘Beacon Name’, Its ‘Universally Unique ID’, Its ‘Major’ and ‘Minor’ location details, its physical ‘Address’ and any beacon ‘Groups’ it belongs to.
Add BeaconsRegister - tabs / Info
![Page 7: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/7.jpg)
To begin click ‘Add Beacon’.
Add BeaconsAdd
![Page 8: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/8.jpg)
Proceed to fill out all the mandatory information in the beacon details section.
These details are the minimum mandatory information required to successfully setup a new beacon in Solo.
Add BeaconsDetails section
![Page 9: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/9.jpg)
The:Beacon Name = Is the primary descriptor for the beacon itself and should be used to fully detail its specific location.
Universally Unique ID or UUID = The 32 digit hexadecimal code that comes supplied with the device. This distinguishes the beacon from any other beacon.
Major and Minor = numerical fields, also supplied with the device and should be completed accordingly.
Add BeaconsDetails section - cont.
![Page 10: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/10.jpg)
The Optional information section allows you to stipulate the beacons exact GPS location, add the beacon to a group or groups and also add messaging for Solo app users.
Add BeaconsOptional Information
![Page 11: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/11.jpg)
For the Beacon location enter the address where the beacon is located.
This will place a pin at that location on the adjacent map - you can then fine tune this placement further by dragging and dropping the pin.
Note: If the beacon will not be located in a fixed position, for example it will be placed in a vehicle or carried on a User’s person, this step is not required.
Add BeaconsOptional Information - cont.
![Page 12: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/12.jpg)
Next stipulate if this beacon is to be part of a ‘Beacon Group’ or ‘Groups’ by selecting appropriately from the dropdown list.
For more information on how to setup beacons groups see the knowledge base.
Add BeaconsOptional Information - cont.
![Page 13: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/13.jpg)
The last section is the messaging fields.
These are used to convey information to any solo app users who enter its vicinity.
Subject = It’s recommended to be kept under 25 characters in order for it to be displayed fully on the applicable devices.
Message = The message to be sent to users.
Add BeaconsOptional Information - cont.
![Page 14: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/14.jpg)
Once all the required information has been entered
Click ‘Save’.
Add BeaconsOptional Information - cont.
![Page 15: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/15.jpg)
The beacons register will re-display with the new beacon added.
Proceed to repeat these steps for as many new beacon as required.
Add BeaconsOptional Information - cont.
![Page 16: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/16.jpg)
Now, let’s look at the ‘Import’ method.
Add BeaconsImport Method
![Page 17: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/17.jpg)
The Import Method allows you to add the details of multiple Beacons by filling-in and uploading a single spreadsheet.
To begin, from the Beacons register, click the ‘Import Beacons’ button.
Add BeaconsInitiat Import
![Page 18: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/18.jpg)
The Import Beacons screen explains that once an import file or spreadsheet has been uploaded, the Import wizard will then automatically try to match the data contained in the spreadsheet to theright system fields.
It also breaks down the information types required and allowed within the import file and all the file types that can be used to import the Beacons.
To make getting started easier, there is a handy, preformatted excel template that can be downloaded.
Add BeaconsDownload Template
![Page 19: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/19.jpg)
Complete the import template inputting the details for the Beacons you'd like to add.
Add BeaconsPopulate Template
![Page 20: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/20.jpg)
Then, return to Solo and click ‘Upload File’.
Select the import file from your computer, thenclick ‘continue’.
Add BeaconsUpload Template
![Page 21: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/21.jpg)
The import wizard will display the results of its attempted data match, showing the matched Solo Platform field names in relation to the information contained in the uploaded spreadsheet.
To make any corrections, simply modify the required dropdowns and click ‘continue’ to review the imported data.
Add BeaconsAnalyse Data-match
![Page 22: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/22.jpg)
If everything looks OK, click 'Import' to complete the process.
You'll then be returned to the Beacons Register, where the newly added Beacons will be visible.
Add BeaconsImport Data
![Page 23: Add Beacons Solo Platform€¦ · Add Beacons Introduction. This can be done in two ways. Via the manual method or Via the import or bulk method First, we’ll look at the manual](https://reader034.fdocuments.net/reader034/viewer/2022050421/5f8ff6fa0e8bd83d43711bb6/html5/thumbnails/23.jpg)
This presentation document has been prepared by Vault Intelligence Limited (“Vault") and is intended for off line demonstration, presentation and educational purposes.
The information is not version controlled and as such is subject to change without notice.
Vault does not accept any responsibility or obligation to inform users of this presentation of such changes.
This includes any copies of this presentation taken and modified outside of the Vault domain.
[DISCLAIMER]