ADA Special Needs - Florestone Blue Spring Sterling Silver Shell Warm White Classic Grey Dusty Rose...
Transcript of ADA Special Needs - Florestone Blue Spring Sterling Silver Shell Warm White Classic Grey Dusty Rose...
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
FlorestoneSpecial NeedsProducts Features
COLORSStandard: White
OPTIONAL MANUFACTURERS' MATCH COLORS
AMERICAN STANDARD
ELJER
KOHLER
For other colors, call for availability and price.
*Note on Code Compliance:Since local codes and regulations vary Florestone Products will not be responsible for code compliance. Please check with your local city and county building departments for specific regulations or restrictions before ordering.
A LEADER IN WHEELCHAIR ACCESSIBLE PRODUCTS.
Florestone is a recognized leader in the
manufacture of showers, shower/baths and
shower receptors that meet various state
and federal requirements. Florestone
Special Needs units are known for their
ease of installation, convenience in use
and durability.
QUALITY YOU CAN TRUST.
Since 1947, Florestone Products Company
has built a reputation based on product
quality, ease of installation and reliability.
Today we serve contractors, engineers,
specifiers, architects and builders with
products, service and distribution
nationwide. The manufacturing methods,
craftsmanship and attention to detail of
Florestone Special Units Showers are
second to none.
Bone
Candlelight
Daydream
Fawn Beige
Light Mink
Loganberry
Rain Forest
Rhapsody Blue
Spring
Sterling Silver
Shell
Warm White
Classic Grey
Dusty Rose
Glacier Blue
Island Sea
Natural
Peach Bisque
Platinum
Ruby
Sage
Sandlewood
Twilight Blue
Verde
Zinfandel
Almond
Biscuit
Chamois
Country Grey
Desert Bloom
Ice Grey
Innocent Blush
Jersey Cream
Mexican Sand
Merlot
Seafoam Green
Skylight
Teal
Tender Grey
Thunder Grey
Timberline
Wild Rose
Sp
ecia
l N
ee
ds S
how
ers
In
sta
lla
tion
FLORESTONE SHOWERSSHOULD BEINSTALLED BY A PROFESSIONAL PLUMBINGCONTRACTOR.
Complete two sides of the squared and framed pocket according to dimensional drawings
Some Florestone units are too large to pass through doorways. Make sure the unit is in the installation area before framing is completed
FlorestoneFiberglass ShowersInstallation Instructions
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Dimensions may vary ± 1/4" inch-
check unit before installation.
CAUTION
FRAMING
Since local codes and regulations vary, Florestone Products will NOT be responsible for code compliance. Please check with your local city and county building departments for specific regulations or restrictions before ordering.
NOTE ON CODE COMPLIANCE:
SETTING 3-WALL SHOWER UNITRemove shipping screws and disassemble unit. Set shower floor section into position with front apron firmly on the floor. Make sure unit is level and plumb by using a level (31 min.) on front and side faces as well as the top of the dam. Secure shower floor flanges to studs with either nails or screws. Apply silicon caulking to horizontal shoulder of shower floor before setting wall sections into position. Set one wall panel into position and secure wall flanges to studs. Apply silicon caulking to vertical shoulder and set second wall panel into position by securing flanges to stud wall. Make sure that all seams are properly caulked.
SET SHOWER UNIT It is recommended that shower be set in a bed of mortar. Install unit into position making sure the threshold and side wall are level and plumb.
SECURE UNITFasten back and side wall flanges to studs with large headed #6 galvanized nails. Use #12 sheet metal screws for installation into steel studs.
ROUGH PLUMBINGRough plumbing must extend 1" above sub-floor or slab. Unit should be located to provide access through the walls to make connections. Lay out accurate location of valves and drill y/ holes. From finished side of unit enlarge holes with a hole saw. For large openings use a saber saw. For fire rated walls, finished wall board must be in place before unit is installed.
CAULKCaulk all openings around valves and outlets with a silicone caulking.
CLEANINGClean up with liquid detergent and warm water.
AVOID USING ABRASIVE CLEANERS
PREPARE ROUGH-INSpecial Needs units require a below-the-floor rough-in to meet Federal, State or Local Codes.
SLOPE ¼" PER FOOT
SET AND LEVEL UNIT ON MORTAR BASE
FLOOR
CUTOUT IN FLOOR
½"
Level
AD
A B
arrie
r-Fre
e In
form
atio
n
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
(60" min. inside dim.)
24" max.
30" m
in.
C of controlsor hand held
sprayer
FoldingADA Seat
½" max.Beveled face of �nish
Figure 38-A Figure 38-B
SLOPE ¼" PER FOOT
½"
FLOOR
SET AND LEVEL UNIT ON MORTAR BASE CUTOUT IN FLOOR
SLOPE ¼" PER FOOTFLOOR
SET AND LEVEL UNIT ON MORTAR BASE CUTOUT IN FLOOR
CALIFORNIAADA REQUIREMENTS
Roll In Shower Installation Transfer Shower Installation
Back
Lav.ClearFloorSpace
60" min.
12" max. 24" min.
24" max.
33" -
36"
9"
Foot
Hea
d30
" min
.
Controlarea Seat
Foot Head
Seat 24" min.
12" min.
These drawings can aid you in ADA code compliance. Please note that we cannot assume responsibility for code compliance on your specific project. Please check specifications with the appropriate authorities before ordering.
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
AD
A B
arr
ier-
Fre
e I
nfo
rma
tion
21
ADA CODE COMPLIANCE4.20 Bathtubs
4.21ShowerStalls
Back
Lav.
Lav.
ClearFloorSpace
60" min.
12" max.
48" 60"
36"
36" 36
"
24" min.
24" max.
27" max.
33" -
36"
9"
Foot
Side
Seat
Wal
l
Cont
rol W
all
Side
Hea
d
36"
30" m
in.
30" m
in.
Controlarea
Controlarea
Seat
Foot Head
Seat
24" min.12" min.
18"
18"
48" m
ax.
38" m
ax.
33"-
36"
33"-
36"
BackSeat wall Control wall
24"