Wisely Laser Machinery LimitedB6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China

Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: sales@wwlaser.hkwww.wwlaser.com www.wwlaser.hk www.wisely-laser.com

Application

Feature

Technical Parameter

TYPE Working Area Laser Power Max. Cutting Depth Laser Type Laser Power Supply

Drive Type Default Software / Controller

Max. Engraving Speed Max. Cutting Speed Positioning Accuracy Laser Type Maximum forming character Power Supply Software Supported Graphic Format Supported Water-cooling System Working Table (DEFAULT) 1 air pump and 1 water pump 1 Exhaust Fan

Wisely Laser Machinery LimitedB6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China

Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: sales@wwlaser.hkwww.wwlaser.com www.wwlaser.hk www.wisely-laser.com

◆ 9. DSP Control System.◆ 10. CE Certificate, ISO9001:2008, FDA.

LeadShine 3-ph Stepper Driver and Motor--the best made in China

Timing Belt from GermanyHIWIN Linear Guide Rail--the best made in Taiwan

Yes, but we advise you to pay more money to purchase one chiller.

◆ 7. Three kinds of software to output data: LaserCutEngrave, AutoCAD and CorelDraw.◆ 8. Massive Memory Capacity: Standard allocation of 128Mb inner memory capacity.

YesYes

0-1000mm/s

≦0.01mm

PLT, DXF, BMP, JPG, GIF, PGN, TIF and so on

English:1.5 x 1.5mm

WISELY 6090 is mainly used to engrave many kinds of non-metal materials, such as Acrylic, Bamboo products, Cloth, Plastic,Marble, Glasses, Woods, PVC, etc. It can process the plexiglas products, acrylic display panel lenses, wood carving, woodpercutaneous flowers, advertising products, crystal characters, packing boxes, models, toys, furniture and so on.

Transmitting Parts

600mm*900mm

◆ 1. High Accuracy--HIWIN Linear Guide Rail from Taiwan.◆ 2. Laser tube and power supply Beijing RECI, long life, perfect cutting/engraving effect and strong power.◆ 3. Four kinds of table: Motorized Up/Down Table, Fixed Honeycomb Table, Fixed Flatbed Table & Fixed Knife Table.◆ 4. Online & Offline Operation: To transmit data from PC to machine by USB cable or transmit by Flash Memory Disk.◆ 5. High Rigidity--The thickness of the machine body is 2.0mm, the shape will not change within 30 months.◆ 6. USB 2.0 Interface, steady and quick transmitting speed, suitable for Laptop.

ArtCut, CorelDraw, PhotoShop, AutoCAD

Fixed Honeycomb Table, Fixed Flatbed Table or Fixed Knife Table.

220V±10% 50HZ or 110V±10% 60HZ

0-600mm/s

Glass CO2 Laser Tube

Made by Beijing RECI

LaserCutEngrave / DSP Control from LeadShine

MY-L6090

60W / 80W / 90-100W / 100-130WMax. 10 / 15 / 20 / 25mm Acrylic

RECI Glass CO2 laser tube--the best made in China (Lifespan: Max. 10 000 hours)

Catalog of MY-L6090 Laser Engraving Machine

Net Weight Gross Weight Gross Power Operating Temperature Equipment Dimension Package Size Operating Humidity Optional Devices Recommended Spare Parts

2. We use Beijing RECI laser tube and laser power supply if thepower exceeds 80W.

1. We use the high-precision Linear Guiderail imported fromHIWIN or PMI in Taiwan.

4. Three Softewares for your choice. If you want to choose CorelDraw_LaserCutEnrgave or AutoCAD_LaserCutEngrave, youshould install CorelDraw or AutoCAD in your PC at first.

Why Wisely Laser?

1450mm*1100mm*1070mm

3. We use the driver, motor and controller from www.leadshine.com which is famous throughout the world.

Laser Tube, Lens, Mirror, Laser Power Supply

5%-95% Free of condensed waterChiller, Motorized Up/Down Flatbed Table, Rotary Attachment, Automatic Focus, etc.

<1200W

230 kg410 kg

1650mm*1300mm*1270mm

0℃-45℃

2) Fixed Flatbed Table（Default）

6. Limit Switches for X & Y Axis

7. The inside light

8. Pass-Thru Doors

9. Castor WheelsEach machine is equipped with 4 or 6 castor wheels to make it easier to move it around the workshop oroffice. The Castor Wheels can weigh from 150 kg to more than 1500 kg.

The machine frame is built with doors that allow materials to extendout the front and/or rear of the machine. The is helpful whenengraving or cutting material that can't fit completely inside themachine. The limits are endless.

The limit switch, which are non-contact sensors, prevents the X & Yaxis from attempting to go beyond the mechanical limits of themachine.

The LED tube, which will providing enough light, is helpful foroperator to check what is happening inside by the viewing windowon the machine.

5. Four kinds of table:1) Motorized Up/Down Flatbed Table Z（Optional）

3) Fixed Honeycomb Table （Default） 4) Fixed Knife Table （Default）

11. Control Panel

12. Blower / Fan / Vacuum

The vacuum blower creates an air flow to remove dust and fumes from the work area of the laser machine. It is important to removethe dust and fumes from the laser engraving areas because dust can settle onto the mirrors or lens. Dust on the mirrors or lens willcreate a focal point of the laser's heat and soon destroying the optics.

10. The off-line operation is available, the machine can work WITHOUT a computer, one flash memorydisk can be enough for saving and importing files.

User Friendly LCD control panel allows the user to quickly change selected program and modify machine operational conditions.You can Run/Pause, Reset, Datum, Test/Fire, Outline engrave project area, Move the X/Y/Z axis.

13. Air Pump

14. Water Pump

16. Manual Focus

You should put the material onto the table before focusing,then to process once you finish focusing, the acrylic piecewith machine will help you find the focus distance.

1. Lock cap2. Focus distance

17. Automatic Focus

15. Red Dot Pointer

At the beginning of your processing work, you don’t know where the first laserdot will hit, the Red Dot Pointer will tell you, it can simulate the laser.

The air pump is used for three basic reasons:1. To push fumes away from the laser's focal lens. The contaminants could destroy the lens.

2. To push air into the material's kerf as created by the laser beam. Air that is applied to thekerf will remove debris/fumes and allow the laser light to penitrate deeper through thematerial.

3. To help to cool the material. If the laser cut/engraved material stays hot, then it couldwarp or shrink.

The water pump is used to cool the laser tube. It is suitable forlaser tube with 80W or less than 80W. If your machine adoptslaser tube with 100W or more than 100W, we advise you buy aWater-cooling Chiller.

CW-3000 Chiller--For 25W, 40W, 60W and 80W laser tubeCW-5200 Chiller--For 90-100W, 100-130W, 130-160W laser tube

18. Rotary Attachments

19. Lens and Reflecting MirrorWe use Lens and Silicon reflecting miorror imported from Singapore. The Focal Length is1.5 or 2 inch, it is suitable for engraving. The Focal Length is 3 or 4 inch, it is suitable forcutting. The reflecting rate of mirror is close to 99.99%.

Rotary Attachment with rollers--it can engrave on the material likebottles or cups.

Rotary Attachment with clips--it can engrave on the material like wood,bamboo, cup and so on.