Acoustic Solutions from Armacell - 2010FILE/Armacell... · ACoUSTiC SolUTionS IN-TUNE with a ......

Insulation Engineered For DUCT SYSTEMS

ACoUSTiC SolUTionS

IN-TUNE with a quieter environment

The efficient, cost-saving jacketing system for insulated pipes

In-tune wIth a QuIeter envIronment

Successful noise control in a given application will inevitably involve a variety of mechanical and physical manipulations. Meth-ods for influencing the aerodynamic and mechanical aspects of the noise include: modifying operating conditions, re-designing components and mechanical systems,using active noise cancellation technologies or even acoustic masking. When correctly applied, these culminate in the desired reduction of noise at the point where it causes concern. In the event that changes to the source or components cannot be made, or that the noise reduction remains unsatisfactory, then enclosures and screens, which usually imply the use of acoustic materials, serve to contain and dissipate the noise energy.

In many cases, acoustic materials provide a low cost method of controlling noise and if correctly applied, will have a significant effect on reducing the overall noise level.

The Armacell range of elastomeric acoustic insulation materials offers significant advantages over traditional acoustic prod-ucts.

All Armacell acoustic products are dust and fibre free and many fulfil additional roles as thermal insulation. Unlike many acous-tic insulation products Armacell materials are resistant to moisture ingress and highly resilient against mechanical impact.

Product Selector

Duc

twor

k

Plan

t roo

m

Encl

osur

es

Floo

ring

Indu

stria

l Pro

cess

Pip

es

Was

te W

ater

Pip

es

Serv

ice

Wat

er In

stal

latio

ns

Class O Armaflex Sheet

Class O Armaflex Tubes

ArmaSound RD

ArmaSound Floor

ArmaSound Industrial Systems

ArmaSound Barriers

Arma-Chek R Barrier

Armaload

Tubolit Fonoblok

For the acoustic performance of Armacell’s Acoustic product Range please visit www.QuietEnv i ronment .co .uk

All statements and technical information are based on results obtained under typical conditions. It is the responsibility of the recipient to verify with us that the information is appropriate for the specific use intended by the recipient. For updates to this document please refer to our website www.armacell.com/uk. © Armacell UK Ltd. · Subject to alterations · 2010


understanding ductwork as a noise source and the treatments available

Both structure-borne and air-borne noise within the HVAC system will travel along the connecting duct network. If left untreated, there will be little attenuation of this noise, even over large distances.

There are typically 4 ways in which the noise from ductwork may transfer into the living or working space:

a. Air-borne propagation noise b. Break-out & break-in noise c. Duct wall vibration d. Acoustic bridging

In order to effectively reduce noise from the HVAC system, consideration must be given to the treatment of each of these modes of transmission.

Internal liningInternally lining ductwork using a sound absorbing material is the most effective way of reducing both air-borne and breakout noise. In addition, any sufficiently visco-elastic material applied internal to the duct wall will also restrict duct wall vibration.

The Armacell range of elastomeric sound absorbing materials is particularly well suited to internally lining ductwork. Being dust and fibre free there is no risk of fibre migration and no need to face or encapsulate Armaflex or ArmaSound RD materials.

Armaflex is also uniquely resistant to bacteria and mould growth owing to the in-built anti-microbial protection.

Combined thermal & acoustic liningIt is standard practice to insulate ductwork internally for acoustic performance and externally for thermal efficiency. Armaflex materials can however meet both thermal and acoustic requirements through internally lining ductwork.

By eliminating the need for an additional external insulation layer, this approach results in a significant reduction of material and labour.

eliminating acoustic bridgingWherever a direct physical connection exists, structure-borne sound, or vibration from the duct can pass to other parts of the building structure. This can reduce the effectiveness of all other acoustic treatments applied to the duct. In the worst cases all acoustic treatment can be rendered ineffective as the noise follows the ‘path of least resistance’.

So called ‘acoustic bridges’ are prevented by the introduction of resilient materials, like high density Armaload sections be-tween points of direct contact with the duct.

Product Solutions from armacell

© Armacell UK Ltd. · Subject to alterations · 2010

ProductsBreakout

NoisePropagation

NoiseDuct Wall Vibration

Acoustic Bridging

Class O Armaflex

Armasound RD

Armasound industrial systems

Armasound Barrier

Armaload



understanding enclosures and how to treat them

Compressors, pumps, air-conditioning units, heat pumps, generators and motors all generate large volumes of nuisance noise. Treating these pieces of equipment using acoustic enclosures or cabinets is a highly effective way of reducing the levels of noise experienced.

When contained within any enclosure the noise associated with equipment exists in 4 distinct fields:

a. Internal airborne noise b. External breakout noise c. Enclosure wall vibration d. Structure borne mounting vibration

Lining enclosuresInternal lining of enclosures prevents the build up of reverberant noise within the enclosure. This improves conditions inside the enclosure and also reduces the volume of energy able to break out from the enclosure.

As such lining enclosures proves to be doubly effective – reducing noise both inside the enclosure and immediately around it. Often the effect is even greater as lining materials also help to restrict enclosure wall vibration.

Selecting a sound absorbing liningSpace may be restricted and so the need for good absorption at low thicknesses should be considered. Beyond acoustic performance alone the health of any op-eratives working with an enclosure must be considered, as must the potential that linings may come into contact with oils or other chemicals.

Armacell manufactures a number of high performance sound absorbing materials suitable for internally lining enclosures. Due to the dust and fibre free nature of Armacell products, all of these materials are easily fitted in a single step without the need for additional facings and with no risk of fibre migration.



ProductsBreakout

NoiseInternal Noise

Enclosure Wall Vibration

Vibration Isolation

Class O Armaflex

Armasound RD

Armasound Barrier



Industrial pipework as a noise source and treatments availableHeavy industrial pipework represents a major source of noise contamination on and around industrial sites. Reducing this noise is a legal requirement.

The best way of preventing noise breakout is to apply a fully integrated, high performance, acoustic pipe insulation system – such as ArmaSound Industrial Systems. Aside from acoustic performance, this system will also be required to fulfil several roles as thermal insulation and a barrier against pipe corrosion.

armaSound Industrial Systems offer enhanced performance

ArmaSound Industrial Systems prevent noise breakout from industrial pipework and offer improved environmental stability when compared to traditional methods:

1. Firstly, the use of a closed cell layer applied to the surface of the pipe minimis-es water ingress and the risk of corrosion under insulation (CUI).

2. Armacell’s systems do not contain metallic coverings which may be susceptible to rust and/or galvanic corrosion. Instead, our systems use Arma-Chek R which is a tough, flexible elastomeric protective covering. The covering also provides a higher degree of compliance during installation to ensure better flexibility and improved sealing properties.

The use of flexible elastomeric coverings also reduces low-frequency re-radiation effects that may be observed in practical application.

3. The combination of closed and open cell structure allows for a high degree of thermal insulation performance to be achieved. All components within ArmaSound Industrial Systems fulfil both acoustic and thermal roles, eliminating the redun-dancy associated with traditional approaches.

Using an elastomeric covering could reduce re-radiation effects resulting from residual transference of acoustic vibration into the outer surface and also provide better compliance and sealing properties.

Additional acoustic benefits are realised around pipe supports and hangers through further reduction of structurally transmit-ted vibration. The combination of closed and open-cell technology, with an additional barrier covering, offers significant ben-efits to noise control engineers, specifiers and contractors. In particular, high thermal and acoustic performance is combined with the reduced risk of under insulation and galvanic corrosion.



Products Breakout Noise



6 © Armacell UK Ltd. · Subject to alterations · 20108© Armacell UK Ltd. · Subject to alterations · 2010

understanding waste water pipework as a noise source and the treatments available

In any hotel or large residential complex the irregular sound of flushing water or rain dripping can impede a good nights sleep.

This noise can be heard due to the way in which waste water pipes are routed within the building. Water flow reverberates within the pipe and the amplified noise breaks out – partly through the pipe wall itself but primarily through the coupling points.

Coupling points act as acoustic bridges through which noise can travel in the form of vibrations, exciting other surfaces to vi-brate and creating a “loudspeaker” effect. As a result waste water pipework can be highly effective at radiating nuisance noise throughout a building.

Decoupling pipeworkIntroducing a visco elastic resilient layer between the pipe and the structural connection points has the effect of decoupling the acoustic bridge – significantly reducing the breakout of noise.

Armacell manufactures materials able to decouple waste water pipework and minimise the nuisance noise they can carry.

Tubolit AR Fonoblok and Tubolit AR Fonowave are thin and highly cost effective decoupling materials that are proven to reduce noise breakout from waste water pipework. Aside from decoupling, both materials also perform a role damping vibration in the pipe wall – reducing the overall noise breakout.

noise from waste water pipework Noticeable improvements in noise levels from waste water pipes, both steel and plastic, can be achieved with the application of materials to damp the pipe wall. However, the most dramatic reductions come from simply decoupling the pipe and the building structure at fixing points and any protruding elements. Tubolit AR Fonoblok is respectfully suitable for metal and plastic pipework and offer reliable de-coupling performance for the entire length of the pipe.



ProductsBreakout

Noise

Acoustic Bridging

Cast Iron Pipes


tubolit Fonoblok



noise transmission through flooring and the treatments available

Noise rarely remains confined to the room in which it is generated. In office buildings and multi-storey residences the noise created on one floor are able to travel directly through the floor into the rooms directly below.

This can cause considerable distress to building occupants. Even footfall vibra-tions made by simply walking around can create a loud nuisance noise to the occupants directly below.

Introducing visco-elastic resilient decoupling materials to a floor construction reduces the transmission of vibration through the floor. As a result, minimising noise transmission between floors is regulated under the Building Regulations Approved Document Part E.

under-screed resilient layersOne common flooring construction is to create a floating screed on top of a concrete slab. Floating screed constructions rely on visco-elastic sheets to decouple the two layers of rigid concrete. Provided there are no rigid points of contact that might form an acoustic bridge the vibrations excited in the screed by movement in the room above cannot be transferred through the structure into the room below.

ArmaSound Floor is a particularly effective under-screed resilient layer that easily meets the requirements of the Building Regulations Part E. In addition, ArmaSound Floor is also highly resistant to moisture ingress and is difficult to critically tear during install.



ProductsImpact Noiseunderscreed

Impact Noisewooden floor

Armasound RD

Armasound Floor

Insulation engineered to prevent condensation and energy losses

The insulation system engineered to prevent condensation and energy losses

New Built-In Anti-Microbial Protection Reduces Mould and Bacteria Growth

Built-In Vapour Barrier Prevents Condensation

Reduce Energy Losses Up to 87%

Ease of Application


Class O armaflex: The insulation system engineered to prevent condensation and energy losses

Class O Armaflex is the flexible, closed cell, elastomeric, nitrile rubber insulation that offers reliable protection against con-densation and effectively prevents energy loss.

Class O Armaflex is dust free, fibre free and CFC free with an ODP of zero. Its inherent attributes and combination of properties makes Armaflex a highly efficient method of insulating hot and cold water services, chilled water lines, heat-ing systems, air conditioning ductwork and refrigerated pipework for condensation control, energy conservation and frost protection.

New Built-in anti-microbial protection reduces mould and bacteria growth

Built in vapour barrier prevents condensation

Reduces energy losses by up to 87%

Lightweight and flexible, quick and easy installation with low maintenance requirements, resulting in time and cost savings

Excellent resistance to the effects of ozone, oil and chemicals (consult product test list)

Technical Product DataValues Remarks

Material Foamed nitrile rubber

Max. Surface Temperature +105° C* For temperatures between -50° C and - 200° C, please consult our Technical Department. Tel. +44 (0)161 287 7038 · Fax +44 (0)161 633 2685

Max. Temperature for Flat Surface +85° C

Min. Surface Temperature -200°C*

Thermal Conductivity at 0° C 0.034 W/(m · K)

Test acc. to EN ISO 8497Thermal Conductivity at +20° C 0.036 W/(m · K)

Thermal Conductivity at +40° C 0.038 W/(m · K)

Water Vapour PermeabilityMoisture Resistance Factor µ 7,000BS EN ISO 9346:1996 2.79 · 10(-14) kg/(m s Pa)

Water Absorption 0.2% by volume Test acc. ASTM C 209

Surface Spread of Flames Class 1 Surface Spread of Flame acc. BS 476 Part 7: 1997Fire Propagation acc. BS 476 Part 6: 1989

Test results for Surface Spread of Flames and Fire Propagation meets • Building Regulations 2000 (England and Wales) • Building Standards (Scotland) Regulations 1990• Building Regulations 2000 (Northern Ireland)• Building Regulations 1997 (Republic of Ireland) for the Class O fire category

Tested in accordance with UL 94

Fire Propagation Total Index Performance (I) ≤ 12Sub Index (i1) ≤ 6

Fire Performance acc. to Building Regulation Class O

Reaction to fire Self-extinguishing, does not drip

Noise Reduction Sound Absorption Coefficient ISO 354:2003 up to 0.8 Also suitable for use in the prevention of sound passage

Resistance toBuilding Materials Very GoodChemicals Consult Product Test ListOzone Very Good

Environmental Aspects ODP zero, GWP zero

Health AspectsDust & Fibre FreeMicroban anti-microbial protection

Outdoor applications: Class O Armaflex should be painted with Armafinish 99 paint to the recommended thickness within 3 days. Two or more coats may be required.



Class O armaflex TubesLength 2 m, colour black

Copper pipeCu

Iron and steel pipe Fe

Min ID mm

6 mm Nominal thickness


NB inch

Nom OD inch

Nom OD mm

NB inch

Nom OD mm

Nom thick-ness Reference

m / carton


m / carton

1/4 6 6.5 6mm CO-06X006 544

1/4 6 9.5 9 mm CO-09X006 352

3/8 10 10.5 6mm CO-06X010 400 9mm CO-09X010 280

3/8 1/2 12 12.5 6mm CO-06X012 336 9 mm CO-09X012 240

1/2 5/8 15 16.0 6mm CO-06X015 266 9 mm CO-09X015 192

5/8 3/4 20.0 6mm CO-06X020 210 9 mm CO-09X020 156

3/4 7/8 22 1/2 21.3 22.5 6mm CO-06X022 172 9 mm CO-09X022 140

1 1 1/8 28 3/4 26.9 29.0 6mm CO-06X028 # 124 9 mm CO-09X028 98

1 1/4 1 3/8 35 1 33.7 9 mm CO-09X035 84

1 1/2 1 5/8 42 1 1/4 42.4 9 mm CO-09X042 60

1 1/2 48.3 9 mm CO-09X048 56

2 2 1/8 54 9 mm CO-09X054 54

2 60.3 9 mm CO-09X060 42

Copper pipeCu


Min ID mm



NB inch

Nom OD inch

Nom OD mm

NB inch

Nom OD mm


m / carton


m / carton

1/4 6 9.5 13mm CO-13X006 226

3/8 10 10.5 13 mm CO-13X010 188 19mm CO-19X010 104

3/8 1/2 12 12.5 13 mm CO-13X012 162 19mm CO-19X012 92

1/2 5/8 15 16.0 13 mm CO-13X015 136 19mm CO-19X015 78

5/8 3/4 20.0 13 mm CO-13X020 112 19mm CO-19X020 70

3/4 7/8 22 1/2 21.3 22.5 13 mm CO-13X022 104 19mm CO-19X022 64

1 1 1/8 28 3/4 26.9 29.0 13 mm CO-13X028 78 19mm CO-19X028 50

1 1/4 1 3/8 35 1 33.7 35.5 13 mm CO-13X035 60 19mm CO-19X035 40

1 1/2 1 5/8 42 1 1/4 42.4 43.5 13 mm CO-13X042 56 19mm CO-19X042 32

1 1/2 48.3 49.0 13 mm CO-13X048 40 19mm CO-19X048 30

2 2 1/8 54 55.0 13 mm CO-13X054 42 19mm CO-19X054 24

2 60.3 61.0 13 mm CO-13X060 36 19mm CO-19X060 24

2 1/2 2 5/8 67 68.0 13 mm CO-13X067 34 19mm CO-19X067 20

2 13/16 3 76.1 2 1/2 76.1 77.0 13 mm CO-13X076 28 19mm CO-19X076 18

3 3 1/8 80 81.0 13 mm CO-13X080 28 19mm CO-19X080 16

3 88.9 90.0 13 mm CO-13X089 22 19mm CO-19X089 16

3 1/2 3 2/3 93 94.0 13 mm CO-13X093 20 19mm CO-19X093 16

4 4 1/4 108 109.0 13 mm CO-13X108 18 19mm CO-19X108 12

4 114.3 115.5 13 mm CO-13X114 18 19mm CO-19X114 12

... product range of tubes continued overleaf

• 13 mm Delivery quoted on request from 80mm to 114mm

• 19 mm Delivery quoted on request from 80mm to 114mm.

• All Class O Armaflex tubes available as SLIT items. Add 5 p/m net after discount has been applied. For ordering add -SLT to above codes (e.g. CO-19X010-SLT)

• Items marked with # - delivery: 10 working days



Class O armaflex TubesLength 2 m, colour black

Copper pipeCu


Min ID mm



NB inch

Nom OD inch

Nom OD mm

NB inch

Nom OD mm

Nom Thick-ness Reference

m / carton


m / carton

3/8 1/2 12 12.5 25 mm CO-25X012 50

1/2 5/8 15 16.0 25 mm CO-25X015 48 32 mm CO-32X018 (1) 32

5/8 3/4 20.0 25 mm CO-25X020 40

3/4 7/8 22 1/2 21.3 22.5 25 mm CO-25X022 40 32 mm CO-32X022 32

1 1 1/8 28 3/4 26.9 29.0 25 mm CO-25X028 32 32 mm CO-32X028 24

1 1/4 1 3/8 35 1 33.7 35.5 25 mm CO-25X035 24 32 mm CO-32X035 22

1 1/2 1 5/8 42 1 1/4 42.4 43.5 25 mm CO-25X042 24 32 mm CO-32X042 16

1 1/2 48.3 49.0 25 mm CO-25X048 22 32 mm CO-32X048 12

2 2 1/8 54 55.0 25 mm CO-25X054 18 32 mm CO-32X054 12

2 60.3 61.0 25 mm CO-25X060 18 32 mm CO-32X060 12

2 1/2 2 5/8 67 68.0 25 mm CO-25X067 16 32 mm CO-32X067 # 12

2 13/16 3 76.1 2 1/2 76.1 77.0 25 mm CO-25X076 14 32 mm CO-32X076 10

3 3 1/8 80 81.0 25 mm CO-25X080 12

3 88.9 90.0 25 mm CO-25X089 12 32 mm CO-32X089 8

3 1/2 2 2/3 93 94.0 25 mm CO-25X093 12

4 4 1/4 108 109.0 25 mm CO-25X108 8

4 114.3 115.5 25 mm CO-25X114 8 32 mm CO-32X114 6

Class O armaflex DHCG Compliant RangeMeets Building Regulations Part L (England & Wales) domestic compliance requirements; Length 2 m, colour black

Copper pipeCu

Max.Permissible Heat loss

Insulation Thickness Reference

m / carton

Nom OD inch

Nom OD mm

8 7.06 W/m 13 mm CO-13X010 188

3/8 10 7.23 W/m 13 mm CO-13X010 188

1/2 12 7.35 W/m 19 mm CO-19X012 92

5/8 15 7.89 W/m 19 mm CO-19X015 78

7/8 22 9.12 W/m 25 mm CO-25X022 40

1 1/8 28 10.07 W/m 25 mm CO-25X028 32

1 3/8 35 11.08 W/m 25 mm CO-25X035 24

1 5/8 42 12.19 W/m 25 mm CO-25X042 24

2 1/8 54 14.12 W/m 32 mm CO-32X054 12

• 25 mm Delivery quoted on request from 80mm to 114mm.

• (1) The additional 3mm tolerance enchancing the sleaving over

• Items marked with # - delivery quoted on request




Class O armaflex 15m CoilsCoil length 15 m, every coil in easy carry bag, colour black

Copper pipeCu


MinID

mm



NB inch

Nom OD inch

Nom OD mm

NB inch

Nom OD mm Reference

Coils/carton

m / carton Reference

Coils/carton

m / carton

1/4 6 6.5 CO-06X006/E-15 20 300

1/4 6 7.0 CO-09X006/E-15 12 180

3/8 10 10.5 CO-06X010/E-15 14 210 CO-09X010/E-15 10 150

3/8 1/2 12 12.5 CO-06X012/E-15 12 180 CO-09X012/E-15 9 135

1/2 5/8 15 16.0 CO-06X015/E-15 9 135 CO-09X015/E-15 9 135

5/8 3/4 20.0 CO-06X020/E-15 9 135 CO-09X020/E-15 7 105

3/4 7/8 22 1/2 21.3 22.5 CO-06X022/E-15 7 105 CO-09X022/E-15 6 90

1 1 1/8 28 3/4 26.9 29.0 CO-06X028/E-15 # 5 75 CO-09X028/E-15 5 75

Copper pipeCu


MinID

mm


NB inch

Nom OD inch

Nom OD mm

NB inch

Nom OD mm Reference

Coils/carton

m / carton

1/4 6 9.5 CO-13X006/E-15 9 135

3/8 10 10.5 CO-13X010/E-15 7 105

3/8 1/2 12 12.5 CO-13X012/E-15 6 90

1/2 5/8 15 16.0 CO-13X015/E-15 6 90

5/8 3/4 20.0 CO-13X020/E-15 6 90

3/4 7/8 22 1/2 21.3 22.5 CO-13X022/E-15 5 75

1 1 1/8 28 3/4 26.9 29.0 CO-13X028/E-15 4 60

Class O armaflex Flat SheetColour black, skin on both sides

ReferenceInsulation thickness

mmWidth

mLength

mCarton content

m2

CO-09MM 9 0.5 2 13

CO-13MM 13 0.5 2 9

CO-19MM 19 0.5 2 7

CO-25MM 25 0.5 2 5

CO-32MM 32 0.5 2 4

... product range of sheets continued overleaf


Class O armaflex Flat Sheet Self-AdhesiveColour black, with self-adhesive backing


mmWidth

mLength

mCarton content

m2

CO-09MM/A 9 0.5 2 13

CO-13MM/A 13 0.5 2 9

CO-19MM/A 19 0.5 2 7

CO-25MM/A 25 0.5 2 5

CO-32MM/A 32 0.5 2 4

Class O armaflex Continuous SheetColour black, skin on both sides


mmWidth

mLength

mCarton content

m2

AC-03-99/E 3 1 30 30

AC-06-99/E 6 1 15 15

CO-09MM/E 9 1 10 10

CO-13MM/E 13 1 8 8

CO-19MM/E 19 1 6 6

CO-25MM/E 25 1 4 4

CO-32MM/E 32 1 3 3

Class O armaflex Continuous Sheet Self-AdhesiveColour black, with self-adhesive backing


mmWidth

mLength

mCarton content

m2

AC-06-99/EA 6 1 15 15

CO-09MM/EA 9 1 10 10

CO-13MM/EA 13 1 8 8

CO-19MM/EA 19 1 6 6

CO-25MM/EA 25 1 4 4

CO-32MM/EA 32 1 3 3

Class O armaflex Tape

ReferenceThickness

mmLength

mWidth mm Carton content

CO-TAPE 3 15 50 12 rolls

• All flat and continuous sheets with self-adhesive backing: delivery quoted on request


ArmaSound RDHigh performance sound absorption for a quieter environment

The high performance sound absorption for a quieter environment

RDA

rmaS

ound

RD

High performance sound absorption for a quieter environmentArmaSound RD

ARmASounD RD: The high performance sound absorption for a quieter environment

ArmaSound RD is a versatile acoustic absorber designed for use in a variety of different acoustic applications. A high performance sound absorber which also offers additional barrier (transmission loss) performance and both vibration damping and de-coupling (isolation) properties.

Delivering optimal performance at lower thicknesses than traditional materials, ArmaSound RD is a uniquely advanced open cell acoustic insulation material. Depending on the thickness chosen, ArmaSound RD240 offers excellent sound absorption behaviour across the frequency range.

With a density much greater than traditional acoustic absorption materials, ArmaSound RD is also suitable for some ap-plications that may also call for an acoustic airborne noise barrier.

ArmaSound RD provides a dust and fibre free solution that is suitable for use in a range of demanding environments.

The acoustic properties of ArmaSound RD vary depending on formulation, density and thickness. The best results will be achieved by selecting the most appropriate product grade for the type of noise in question.

Sound Absorption

Open cell structure with complex pore geometry allows for effective absorption of air-borne sound across a broad frequency range

Unique combination of physical properties allows absorption to be maximised at key “nuisance” frequencies

Sound Barrier (Transmission Loss)

Relatively high density and high flow resistance offers an effective barrier to sound

May be suitable for use as an alternative to complex ‘foam-barrier’ multi-layers

Vibration Damping and DeCoupling (Isolation)

Visco-elastic properties help dampen or deaden resonance effects in metal panelwork (e.g. enclosures or ducting) which helps to reduce associated ‘re-raditaion’ effects

Reduces structure-borne noise transmission in flooring when used as isolation pads


Max. Surface Temperature +105° CFor temperatures below -20° C and above +105° C, please consult our Technical Department. Tel. +44 (0)161 287 7038 · Fax +44 (0)161 633 2685

Max. Temperature for Flat Surface +85° C

Min. Surface Temperature -20° C

Fire Performancein accordance with UL94 V0

in accordance with FMVSS 302 Pass

Density 240 kg/m3, 120 kg/m3

Tensile Strength 190 kPa

Elongation 54%

Resistance to ChemicalsOrganic solvents Very GoodDilute inorganic acids & bases Very GoodMineral oils Very Good

For more comprehensive list please consult our Tech-nical Department. Tel. +44 (0)161 287 7038 · Fax +44 (0)161 633 2685

Health Aspects Dust & Fibre Free

Armaflex Adhesive 520 is recommended.


All statements and technical information are based on results obtained under typical conditions. It is the responsibility of the recipient to verify with us that the information is appropriate for the specific use intended by the recipient. For updates to this document please refer to our website www.armacell.com/uk.2 © Armacell UK Ltd. · Subject to alterations · 2010

Arm

aSou

nd R

D

ArmaSound RDHigh performance sound absorption for a quieter environment

ARmASounD RD 240 Sheets & Self-Adhesive SheetsColor: black; open cell

Sheets Sheets with self-adhesive backing

Thicknessmm

Lengthm

Widthm Reference

Sheets / carton Reference

Sheets / carton

6 1 1 ASD-240-06 8 ASD-240-06/A 8

10 1 1 ASD-240-10 5 ASD-240-10/A 5

15 1 1 ASD-240-15 3 ASD-240-15/A 3

20 1 1 ASD-240-20 2 ASD-240-20/A 2

25 1 1 ASD-240-25 2 ASD-240-25/A 2

50 1 1 ASD-240-50 1 ASD-240-50/A 1

ARmASounD RD 240 Sheets & Self-Adhesive SheetsColor: black; open cell

Sheets Sheets with self-adhesive backing

Thicknessmm

Lengthm

Widthm Reference

Sheets / carton Reference

Sheets / carton

6 1 1 ASD-120-06 8 ASD-120-06/A 8

10 1 1 ASD-120-10 5 ASD-120-10/A 5

15 1 1 ASD-120-15 3 ASD-120-15/A 3

20 1 1 ASD-120-20 2 ASD-120-20/A 2

25 1 1 ASD-120-25 2 ASD-120-25/A 2

50 1 1 ASD-120-50 1 ASD-120-50/A 1

ARmAFLEX Adhesive 520Armaflex 520 adhesive has been specially formulated for Armaflex insulation to guarantee uniform, safe seam bonding and to produce butt joints with the given object.

Reference DescriptionCarton content

cans

ADH520/2,5 Armaflex adhesive 520, 2.5 litre 8




• For self-adhesive sheets: delivery quoted on request


Arm

aSou

nd R

D

High performance sound absorption for a quieter environmentArmaSound RD


Arm

aSou

nd R

D

ARMASOUND Industrial SystemsThe First Sound Control Systems to Minimise the Risk of Under Insulation Corrosion

Acoustic pipe insulation systems which minimise corrosion under insulation

Combined Thermal and Acoustic Properties

The“Built-InWater-Vapour-Barrier”ProvidesContinuousLong-TermThermalEfficiency

PreventsCondensationbyUsingClosedCellTechnology

INDUStRIAl SySteMSA

RM

AS

OU

ND

Indu

stri

al S

yste

ms

The First Sound Control Systems to Minimise the Risk of Under Insulation CorrosionARMASOUND Industrial Systems

ARMASOUND INDUStRIAl SySteMS: Acoustic pipe insulation systems which minimise corrosion under insulation

ArmaSoundIndustrialSystemsarehighperformanceacousticandthermalinsulationsystemsforindustrial,marineandoffshoreenvironments.ThesandwichsystemofArmaflex,ArmaSoundRD240andArma-ChekRcoveringprovidesexceptionalnoisereductionwhileminimisingtotalsystemweightandreducingtheriskofcorrosionunderin-sulation(CUI).

ComplianttoISO15665ClassesAtoCandShellDEP31ClassD.Otherstandardsmet includeNORSOKR-004Classes6,7and8andASTME1222.

Combined thermal and acoustic properties

The “built-in water-vapour-barrier” provides continuous long-term thermal efficiency

Significantlyreducedinsulationthicknessandoverallsystemweight

Preventscondensationbyusingclosedcelltechnology

No galvanic corrosion

Non-metalcladdingsystem-reducesHealthandSafetyrisks

ResistsUV,oil,chemicalsandweatherisation

Considerable reduction in maintenance costs

Insertion loss of ArmaSound Industrial Systems acc. to ISO 15665:2003 nom.pipe-Ø:≥300mmto<650mm

ArmaSoundIndustrialSystem Class

Octavebandcentrefrequency,Hz

125 250 500 1 000 2 000 4 000 8000

Insertionloss,dB

ArmaSound Industrial System A (EL) A2 1.4 -3.7 3.9 12.8 18.9 28.6 38.9

ArmaSound Industrial System B (EL) B2 0.9 0.8 9.2 17.2 28.6 38.2 42.0

ArmaSound Industrial System C (EL) C2 -1.2 11.8 16.3 24.3 36.0 49.8 47.6

ArmaSound Industrial System D (EL) D2 -3.3 5.1 15.6 37.2 48.8 49.7 45.6

Layer-setup of ArmaSound Industrial Systems acc. to ISO 15665:2003ArmaSound Industrial System A (EL) System B (EL) System C (EL) System D (EL)

Layer 1 Armaflex 25mm Armaflex 13mm Armaflex 25mm Armaflex 25mm

Layer 2 Arma-ChekR 2mm ArmaSoundRD240 25mm ArmaSoundRD240 25mm ArmaSoundRD240 25mm

Layer 3 Arma-ChekR 2mm ArmaSoundBarrierE 3mm ArmaSoundRD240 25mm

Layer 4 ArmaSound Barrier E 2 mm ArmaSound Barrier E 4 mm

Layer 5 Arma-ChekR 2mm Armaflex 25mm

Layer 6 Arma-ChekR 2mm

PRICeS ON ReQUeSt!For more information and assistance on understanding ISO15665,includingafullcalculationtool,seewww.armacell.com/ukorcallourTechnicalDe-partment.Tel.+44(0)1612877100•Fax+44(0)1616332685

All statements and technical information are based on results obtained under typical conditions. It is the responsibility of the recipient to verifywithus thattheinformationisappropriateforthespecificuseintendedbytherecipient.Forupdatestothisdocumentpleaserefertoourwebsitewww.armacell.com/uk.6 ©ArmacellUKLtd.·Subjecttoalterations·2010

AR

MA

SO

UN

D In

dust

rial

Sys

tem

s

ArmaSound FLOORHigh performance noise reduction for a quieter environment

High performance noise reduction for a quieter environment

FLOORA

rmaS

ound

FLO

OR

High performance noise reduction for a quieter environmentArmaSound FLOOR

ArmaSound Floor

Screed 65mm

ARmASOund FLOOR: High performance noise reduction for a quieter environment

ArmaSound Floor is a lightweight, closed cell elastomeric foam that has been designed to act as an under screed resilient layer. Resilient layers acoustically isolate the concrete subfloor from the surface screed which is laid on top.

Laboratory assessment and continued pre-completion (PCT) testing, in accordance with ISO 140 and ISO 717, have proven ArmaSound to be a superior under screed resilient layer solution. At only 10mm thickness, the product comfortably sur-passes the acoustic requirements of the Building Regulations.

Superior acoustic performance goes beyond minimum requirements

Tough closed cell foam with tight cell structure - Effectively prevents screed bridging and ensures un-compromised acoustic performance

Excellent thermal resistance values offer combined acoustic and thermal performance

In-built Water Vapour Barrier

Underscreed load bearing capabilities

ISO 140 / 717 compliant

Single layered & supplied in continuous rolls to minimise joint details

Supplied in thinner sections (strips) for edge detailing


Max. Service Temperature +85° C For temperatures below 0° C, please consult our Technical Department. Tel. +44 (0)161 287 7038 · Fax +44 (0)161 633 2685Min. Service Temperature 0° C

Acoustic PerformanceAirborne DnT,w+Ctr 48 dB Impact LnT,w 46 dB

Test acc. to ISO 140:1998 Part 4 & 7(for floor set-up: see drawing above)

R-ValueArmaSound Floor 10mm 0.26 m2 · (K/W)ArmaSound Floor 15mm 0.40 m2 · (K/W)ArmaSound Floor 25mm 0.67 m2 · (K/W)

Dynamic stiffness 10MN/m3 Test acc. to BS EN 29052 for ArmaSound Floor 25mm

Water Vapour Permeability Moisture Resistance Factor µ > 2,000

Water Absorption 0.2% by volume Test acc. to ASTM C 209

Resistance toBuilding Materials Very GoodChemicals Consult Product Test List



Outdoor applications - ArmaSound Floor is NOT SUITABLE for outdoor applications


Arm

aSou

nd F

LOO

R

ArmaSound FLOORHigh performance noise reduction for a quieter environment

ARmASOund Floor Continuous SheetColour dark grey, skin on both sides

ReferenceThickness

mmWidth

mLength

mCarton content

m2

ASFL-10-1,5 10 1.5 10 15

ASFL-15-1,5 15 1.5 7 10.5

IT-25-99/E-B1 # 25 1 4 4

# 25 mm sheets meet dynamic stiffness acc. to Building Regulation Part E

ARmASOund Floor Edging ProfileEdging profile in flat rolls. Thickness: half 5mm other half 10mm - forms a L-Profile when installed; Colour black

Reference DescriptionThickness

mmWidth mm

Length m

Carton content m2

AFL-05-10/E ArmaSound Floor edging profile 5 / 10 20 15 t.b.a.

• For all ArmaSound Floor products: Delivery 10 working days


Arm

aSou

nd F

LOO

R

High performance noise reduction for a quieter environmentArmaSound FLOOR


Arm

aSou

nd F

LOO

R

ACCESSORIESVersatile and professional

High performance barrier for a quieter environment

Barriers

AR

MA

SO

UN

D B

arri

er

Versatile and professional ACCESSORIES

ARMASOUND Barrier: High Performance Barrier for a Quieter Environment

ArmaSound Barrier E: Vinyl sound barrier mat loaded with naturally occurring minerals. The product is free of lead, unrefined aro-matic oils and bitumen. It is excellent at reducing the transmission of airborne sound and in enhancing the insertion loss performance of pipe insulation by providing a barrier to noise.

Lead free

Flexible

ArmaSound Barrier T: Bitumen based, lead free, sound barrier mat ideal for use with metal claddings. It is excellent at reducing the transmission of airborne sound and in enhancing the insertion loss performance of pipe insulation by providing a barrier to noise.

Efficient and weight saving

Anti-drumming of thin wall sheet metal

Excellent adhesion on stainless steel, sheet metal and plastics

Lead free

Flexible

ARMASOUND BarrierVinyl sound barrier mat, Colour black

Reference DescriptionThickness

mmWidth

mLength

mCarton content

m2

ASD-BAR-E02 ArmaSound Barrier E 2mm 2 1.25 (1) 2 (1) t.b.a.



ASD-BAR-T ArmaSound Barrier T 2.3 mm - with selfadhesive backing 2.3 0.5 1 40

• (1) Width & length may vary.

• For all ArmaSound Barrier products: Delivery quoted on request


AR

MA

SO

UN

D B

arri

er

High density pipe supports to avoid heat losses at fixing points

High density pipe supports & pipe support sections

Reduces Energy Losses at Fixing Points

Prevents Thermal and Acoustic Bridging

Built-In Vapour Barrier Prevents Condensation

Excellent De-Coupling and Isolation Performance


ArmAloAd: High density pipe supports & pipe support sections

Armaload pipes supports are easy to install economical pipe supports made from a single piece of high density, CFC free (ODP zero), elastomeric insulation.

Reduce energy losses at fixing points Dust and fibre free pipe support system - suitable for schools, hospitals and offices Built-In vapour barrier stops moisture ingress at thermal bridges One-piece design gives ease of application.

Armaload Pipe Support Sections are s a high density, CFC free (ODP zero), flexible elastomeric thermal insulation. Supplied in half round sections to fit over struts and strips of sheet for floor ducts and cross overs between banks of pipes.

Armaload pipe supports and load bearing sections prevent acoustic bridging by eliminating direct contact of pipe and ductwork with hanging support structures. These services are then effectively de-coupled from the building structure.


Description High density flexible elastomeric pipe support

Max. Surface Temperature +105° C For temperatures below -50° C, please consult our Technical Department. Tel. +44 (0)161 287 7038 · Fax +44 (0)161 633 2685Min. Surface Temperature -50° C

Thermal Conductivity at +20° C 0.045 W/(m · K)

Water Vapour Permeability µ 7,000

Water Absorption 0.2% by volume Test acc. to ASTM C209

Surface Spread of Flame Class 1

Reaction to fire Self-extinguishing, does not drop



Outdoor applications should be painted with Armafinish FR paint to the recommended thickness. Two or more coats may be required.



ArmAloAd Pipe SupportHigh Density Pipe Support; Colour: black

Pipe O.D. mm

MinimumI.D.mm

Max pipe support

intervalm

19mmInsulation Thickness

Copper CuIron and

steel Fe Reference

O.D. mm

Width mm Pcs. / carton

15 15 2,00 PH-19-015 53 55 32

22 21,3 22 2,75 PH-19-022 60 55 32

28 26,9 28 3,00 PH-19-028 66 55 32

35 33,7 35 3,50 PH-19-035 73 65 28

42 42,4 42 3,75 PH-19-042 80 65 28

ArmAloAd Pipe Support SectionArmaload is used as a load bearing insulating insert between insulated pipes and their support in low temperature installations. Where Armaflex is in contact with Armaload some compression of the insulation can be expected, but this will not affect the insulative properties.

Reference DescriptionCarton content

m

ALOAD-UH 19 mm x 40 mm x 1000 mm half-round sections 40


Acoustic isolation for waste water piping systems AR FONOBLOK

AR FONOBLOKAcoustic de-coupling for waste water pipes

Effectively Eliminates Acoustic Bridges

Highly Flexible for Fast and Easy Sleeving Over Pipes, Elbows and Flanges

Supplied in Tube Form to Reduce Labour Costs

Fono

blok

Acoustic isolation for waste water piping systems AR FONOBLOK

TuBOLiT AR FONOBLOK: Acoustic de-coupling for CAST-IRON waste water pipes

Tubolit AR Fonoblok tube is a flexible de-coupling insulation to reduce audible noise from waste water pipes within offices, flats, hotels, hospitals and schools. The product offers a certified noise reduction up to 15 dB(A).

Insulating the entire pipework system ensures effective de-coupling from supporting and structural elements as well as other service installations.

At just 5 mm thickness, Tubolit AR Fonoblok can effectively prevent acoustic bridging, especially within severe-ly restricted places. Its high flexibility, low weight and optimised tol-erances ensure easy sleeving and installation of the product - even on elbows and fittings.

Up to 15 dB(A) sound reduction on metal pipes Effectively eliminates acoustic bridges Combined thermal & acoustic insulation Non Wicking Dust & Fibre free Single layer application Highly flexible for fast and easy sleeving over pipes, elbows

and flanges Supplied in tube form to reduce labour costs

TuBOLiT AR Coils: Sound absorption for CAST-IRON waste water pipesLength 15m, Colour: metallic blue

Pipe Insulation thickness 5 mm

Nom OD mm Reference m / carton rolls/ carton

50 TL-50/5-AR 135 9

70 TL-70/5-AR 105 7

90 TL-90/5-AR 75 5

100 TL-100/5-AR 75 5

125 TL-125/5-AR 60 4

150 TL-150/5-AR 45 3

TuBOLiT AR TapeColour blue, self-adhesive

ReferenceThickness

mmLength

mWidth mm

Carton content rolls

TL-TAPE/50-AR 3 15 50 12

TL-TAPE/75-AR 3 15 75 8

TL-TAPE/100-AR 3 15 100 6

Vertical drainage system, semi-protected in a side wall

Outer wall

Drainage system

Living environment

Plaster, 3cm

Tubolit AR


Fono

blok

Insulation Engineered For DUCT SYSTEMS

Armacell UK LimitedMars Street Oldham, Lancs. OL9 6LYTel 0161 287 7100 · Fax 0161 633 2685www.armacell.com · [email protected]

All statements and technical information are based on results obtained under typical conditions. It is the responsibility of the recipient to verify with us that the information is appropriate for the specific use intended by the recipient. For updates to this document please refer to our website www.armacell.com/uk.

© Armacell UK Ltd. · Subject to alterations · Printed in SOL-ACSTIC-0610-EN (UK,ROI)

Acoustic Solutions from Armacell - 2010FILE/Armacell... · ACoUSTiC SolUTionS IN-TUNE with a ......

Documents

Transcript of Acoustic Solutions from Armacell - 2010FILE/Armacell... · ACoUSTiC SolUTionS IN-TUNE with a ......