Acoples Para Vacio
-
Upload
alvaro-burgos -
Category
Documents
-
view
243 -
download
0
Transcript of Acoples Para Vacio
(800)845-4424(253)735-9115
fax (253)735-0437www.torrtech.com
QUICK-DISCONNECTS
Prices shown are in US dollars Prices subject to change without notice
1
TORR TECHNOLOGIES INC
PRICE LISTDecember 2011
1435 22ND ST NW AUBURN WA 98001
GENERAL INFORMATION
The plug, or nipple, is the male half of thequick-disconnect. The coupler, which hasthe sliding collar, is the female half.
All quick-disconnects described here havechemical and heat-resistant Viton™ sealsrated to 400°F continuous.
In the QD10 model, both the plug andcoupler are available with male or femalepipe threads.
The QD11 is available with female threadsonly. A hex nipple (wrench hex in center ofthreads) or close nipple (continuous thread,no hex in center) is available (see below).
1/4” npt: male thread OD ~ .52”fem. thread ID ~ .44”
3/8” npt: male thread OD ~ .66”fem. thread ID ~ .57”
1/2” npt: male thread OD ~ .82”fem. thread ID ~ .72”
Pipe Thread Sizes
Use the followingdimensions todetermine what sizefitting you require:
Hex nipples available in combination sizes, i.e. 1/2” x 1/4”, both brassand steel. Torr stocks a variety of brass, steel, and stainless steel fittingsin addition to what’s shown here. Please call us with your requirements.
FITTINGS
DESCRIPTION PART # EACH
E23325X4E23325X623325X8
246X088266X100286X112
1/4” hex nipple, brass3/8” hex nipple, brass1/2” hex nipple, brass
1/4” close nipple, brass3/8” close nipple, brass1/2” close nipple, brass
$1.352.05
3.25
1.301.552.50
1/4” hex nipple, steel3/8” hex nipple, steel1/2” hex nipple, steel
911-4-4911-6-6911-8-8
DESCRIPTION PART # EACH
$ 1.451.55
2.40
© 2011 TORR TECHNOLOGIES INC
QD10 SERIES
QD11 SERIES
Heat-treated zinc dichromate-plated steelor stainless steel.Viton seals, 400°F continuous.Stocked in 1/4” and 1/2”. 3/8” available.
A1/4, A=.48”3/8, A=.58”1/2, A=.70”
A1/4, A=.56”3/8, A=.75”1/2, A=.92”
Specifically manufactured for vacuum and mediumpressure service.Both plug and coupler internally valved for instantflow on connect, positive shut-off on disconnect.
Measure diameter of nipple to determine size of an existing fitting
DESCRIPTION PART # EACH
Plug, 1/4” fem NPTPlug, 3/8” fem NPTPlug, 1/2” fem NPTPlug, 1/4” fem NPT, stainlessPlug, 1/2” fem NPT, stainless
100504100506100508108504108508
$ 15.3518.3520.3538.3069.65
100504
Plug, 1/4” male NPTPlug, 3/8” male NPTPlug, 1/2” male NPTPlug, 1/4” male NPT, stainlessPlug, 1/2” male NPT, stainless
100514100516100518108514108518
$ 15.9019.0521.2043.9583.45
100514
Coupler, 1/4” male NPTCoupler, 3/8” male NPTCoupler, 1/2” male NPTCoupler, 1/4” male NPT, stainlessCoupler, 1/2” male NPT, stainless
101514101516101518109514109518
$ 22.5029.7532.0560.65
115.05
101514
DESCRIPTION PART # EACH
Coupler, 1/4” fem NPTCoupler, 3/8” fem NPTCoupler, 1/2” fem NPTCoupler, 1/4” fem NPT, stainlessCoupler, 1/2” fem NPT, stainless
101504101506101508109504109508
$ 21.9029.0031.2054.95
101.30101504
Measure diameter of nipple to determine size of an existing fitting
Heat-treated zinc dichromate-plated steelor stainless steel.Viton seals, 400°F continuous.Stocked in 1/4”, 3/8”, and 1/2”.
Specifically manufactured for vacuum and mediumpressure service.Both plug and coupler internally valved for instantflow on connect, positive shut-off on disconnect.
110504
DESCRIPTION PART # EACH
Plug, 1/8” fem NPTPlug, 1/4” fem NPTPlug, 3/8” fem NPTPlug, 1/2” fem NPTPlug, 1/4” fem NPT, stainlessPlug, 3/8” fem NPT, stainlessPlug, 1/2” fem NPT, stainless
110502110504110506110508118504118506118508
$ 5.305.907.107.75
14.0523.1036.60 110504
DESCRIPTION PART # EACH
Coupler, 1/8” fem NPTCoupler, 1/4” fem NPTCoupler, 3/8” fem NPTCoupler, 1/2” fem NPTCoupler, 1/4” fem NPT, stainlessCoupler, 3/8” fem NPT, stainlessCoupler, 1/2” fem NPT, stainless
111502111504111506111508119504119506119508
$ 13.1012.4515.5519.6533.7547.4077.90
Printed on recycled paper
(800)845-4424(253)735-9115
fax (253)735-0437www.torrtech.com
VACUUM PROBES
Prices shown are in US dollars Prices subject to change without notice
TORR TECHNOLOGIES INC
PRICE LISTDecember 2011
1435 22ND ST NW AUBURN WA 98001
VACUUM HOSE
Our vacuum hose assemblies are made in-house so lead times are short.We request 1 day for VH20 and VH22, and 2-3 days for welded VH23 &VH24 assemblies. Same day service available.
VH22 3/8" ID autoclave/oven vacuum hose $ 8.90 / ft.
• Max. temp: 400°F (204°C) continuous• 150 psi external to 100 psi internal pressure• Aramid fiber-reinforced silicone construction• Stainless steel liner• .375” ID x .700” OD• End fittings: NPT, SAE, JIC
VH22 AUTOCLAVE/OVEN
• Max. temp: 1000°F (538°C) continuous• 200 psi external• 100% stainless steel construction• .375” ID x .630” OD• Price includes 1/4” male NPT ends• End fittings: NPT, JIC, BSPT
VH23 AUTOCLAVE/OVEN
JIC
$ 14.80 / ft.
VH23 and VH24 have no outer braiding that can fray. The annulur corrugationsprovide good flexibility and prevent damage to molds and vacuum bags. VH24 hasmore corrugations per inch than the VH23 and is significantly more flexible.
VH23 SS flex autoclave/oven vacuum hose $ 10.70 / ft.
VH24 SS hi-flex autoclave/oven vacuum hose
VH24 AUTOCLAVE/OVEN • Max. temp: 1000°F (538°C) continuous• 1000 psi external• 100% stainless steel construction• .375” ID x .630” OD• Price includes 1/4” male NPT ends• End fittings: NPT, JIC, BSPT
VH23 / VH24 optional ends
• Price per foot includes 1/4” male npt fittings• There is a minimum 3’ charge per hose
Complete assemblyTopBaseGasket
$ 18.809.258.602.50
1/4-turn machined aluminumvacuum probe with round base, 1/4”male npt, wrench flats, non-pinchbase design. Complete assemblyincludes top, base, and gasket.
304114304000000110000004
304114 STANDARD 1/4”
Complete assemblyTopBaseGasket
$ 23.8013.809.202.75
1/4-turn machined aluminumvacuum probe with round base, 1/2”male npt, wrench flats, non-pinchbase design. Complete assemblyincludes top, base, and gasket.
308228308000000220000008
308228 STANDARD 1/2”
Complete assembly $ 11.60
Stainless steel high-flow cover installs overvacuum ports in molds and tooling. Fitsover holes up to 3/8” npt. Attaches with 2stainless steel drive screws (included).Unique design does not hinder flow.
377000
377000 PORT COVER
Complete assemblyGasket
$ 10.902.40
Small footprint machined aluminum port forinstalling in elastomeric and plastic filmvacuum bags. 1.25” hex body helps withfitting installation
364000360004
364000 ELASTOMERIC
Complete assembly $ 27.90
Nickel-plated 1/4” male npt steel port forinstalling through molds and plates from .25”to 1.13” thick. .55” diameter, 90°counter-sunk head, 2.50” long overall. Includes body,o-ring, washer, spring washer, & nut.
374000
374000 THRU-TOOL
Complete assemblyTopBaseGasket
$ 58.6037.4020.902.50
Vacuum probe with rotating cam. Canbe used without gasket for 1000°F use.Compound action applies higherpressure than 1/4 turn style. 1/4” malenpt, wrench flats, non-pinch base design.
334664334000000660000004
334664 CINCH - STAINLESS
PART NO.
LENGTH IN FEET
example: 22 06 64denotes 6 ft.For inch lengths,separate withhyphens.Example: 22-42-64denotes 42”
HOSE ID
4 -1/4”6 -3/8”8 -1/2”
20 12 6 4 - 4/90
HOSE TYPE
20222324
END FITTING
4 -1/4” male NPT4/90 -1/4” male NPT 90°elbow6 -3/8” male NPT6/90 -3/8” male NPT 90°elbow8 -1/2” male NPT8/90 -1/2” male NPT 90°elbow4FNPT - 1/4” fem NPT6FNPT - 3/8” fem NPT8FNPT - 1/2” fem NPT4SAE - 1/4” fem SAE swivel6SAE - 3/8” fem SAE swivel8SAE - 1/2” fem SAE swivel4JIC - 1/4” fem JIC swivel6JIC - 3/8” fem JIC swivel8JIC - 1/2” fem JIC swivel4BSPT - 1/4” male BSPT
this number required only ifdifferent from other fitting
TO DETERMINE PART NUMBERUse this chart, or call and specify type, ID,length, and required end fittings.
EXAMPLE: p/n 221064-4/90VH22, 10 ft, 3/8” ID, 1/4” male NPT x 1/4” 90°male npt
HOSE REPAIRVH22: $12.00/end. VH23 & VH24: $19.00/end.Hose testing: $10.00/hose (applied towards repair charge).Resin-filled hoses are not repairable.
NPT
2
Complete assemblyTopBaseGasket
$ 22.459.25
12.602.50
304124304000000120000004
304124 RECT. BASE1/4-turn machined aluminumvacuum probe with rectangularbase. Allows installation after sealingbag. 1/4” male npt, wrench flats,non-pinch base design.
Complete assemblyTopBaseGasket
$ 30.2521.608.602.50
Vacuum probe with rotating cam foradapting to various material thicknesses.Compound action applies higher pressurethan 1/4 turn style. 1/4” male npt, wrenchflats, non-pinch base design.
324114324000000110000004
324114 CINCH - ALUMINUM
Price includes 1/4” male NPT fittings. Add $1.00 per 1/4” female NPT end.Add $2.00 per 90°end. Add $2.00 per 3/8”, 1/2”, and non-NPT end.
VH20 1/4” ID room-temp vacuum hoseVH20 3/8” ID room-temp vacuum hoseVH20 1/2” ID room-temp vacuum hose
$ 3.85 / ft.4.35 / ft.5.70 / ft.
• 1/4” & 3/8” rated 170°F (88°C), full vacuum• 1/2” rated 140°F (60°C), full vacuum• Double-reinforced, solvent-resistant covering• Available in 1/4”, 3/8”, and 1/2” ID• End fittings: NPT, SAE, JIC
The VH20 combines durability, flexibility, flow,collapse-resistance, safety, & economy into abright yellow, easily identifiable vacuum hose.
VH20 ROOM TEMP
Price includes 1/4” male NPT fittings, straight or 90°elbows.For 3/8”, 1/2”, and non-NPT end fittings, add $2.00 per end.
Complete assemblyBodyKnurled NutWasherGasket
$ 36.7521.056.907.202.70
Hard-anodized machinedaluminum port, 1/4” malenpt, wrench flats. Completeassembly includes body, nut,washer, and gasket.
353444353001353002353003353004
353444 4-PIECE
1.50” dia. x 1.14” tall
2.38” dia. x 1.65” tall
1.24” x 3.50” x 1.61” tall
2.38” dia. x 1.82” tall2.38” dia. x 1.90” tall
1.50” dia. x .18” tall
2.74” dia. x 1.85” tall
2.38” dia. x 1.90” tall
© 2011 TORR TECHNOLOGIES INC
The flexible VH22 has a resilient outer covering thatprevents bag punctures, mold damage, and injuries to users.Aramid reinforcement is superior to glass and dacron.
JIC
NPT
3/8” male NPT
1/2” male NPT
1/4” fem JIC
3/8” fem JIC
1/2” fem JIC
$6.00/end7.00/end
23.00/end24.00/end26.00/end
90°elbow, 1/4” male NPT
90°elbow, 3/8” male NPT
90°elbow, 1/2” male NPT
1/4” fem NPT
3/8” fem NPT
1/2” fem NPT
$27.80/end42.20/end64.10/end21.00/end34.00/end40.00/end
Complete assemblyTopBase onlyBase with o-ring & filterGasketO-ringFilter
$ 33.109.25
17.6024.202.502.104.90
1/4-turn machined aluminum vacuumprobe with filtered base, 1/4” male npt,wrench flats. Complete assembly includestop, base, filter, o-ring, and gasket.
304334304000000330000336000004000015000016
304334 FILTERED
2.74” dia. x 1.85” tall
Patented high-strength silicone rubber sheeting withmolded channels to create diaphragm with integralbreathing. Interflow is commonly used in compaction tablesand other applications where part markoff is not a concern.
EXTRUSIONS - SILICONE
(800)845-4424(253)735-9115
fax (253)735-0437www.torrtech.com
Prices shown are in US dollars Prices subject to change without notice
TORR TECHNOLOGIES INC
PRICE LISTDecember 2011
1435 22ND ST NW AUBURN WA 98001
SILICONE RUBBER SHEET & EXTRUSION
HIGH-STRENGTH SHEETING
Uncured is interleaved with polyethylene and requires care when unrolling.Instructions are provided. Packaged in wood crate for protection.
INTERFLOW™ COMMERCIAL GRADE SHEETINGSOLID & SPONGE
Commercial grade silicone rubber is used for a varietyof applications such as caul pads, pressure intensifiers,shock absorption, gaskets, and items not requiring hightear and tensile strength. Please call for pricing.• Custom die cutting and perforating available.Width: 36” & 48” (limited stock)SOLID hardness (Shore A): 40, 50, & 60SPONGE density: soft, medium, firmColor: red & gray (limited)SOLID finish: light fabric or smoothReinforced solid available
ENVELOPE SEALTriangle seal with insert
870000 $ 8.40 /ft.
SMALL SEAL.63” H. x .75” W. triangle
870800 $ 5.50 /ft.
MEDIUM SEAL.88” H. x .88” W. triangle
871000 $ 6.40 /ft.
LARGE SEAL1.25” H. x 1.38” W. triangle
871200 $ 11.10 /ft.
RIGHT TRIANGLE (90°)FAIRING BAR50 Duro (A) silicone
We have limited stock of tubing and shapes not shown here and we custom-extrude solid and hollow profiles
3
Interflow™ Strip
VACUUM PUMPS, GAUGES, MANIFOLDS
DIAPHRAGM VACUUM PUMP• 25.5” Hg, 1.3 CFM free-flow• 1/8 hp, 120 VACThis extremely quiet, oil-free pumpincludes handle, feet, gauge, andside-mounted switch.
501120 $ 482.00
51XXXXINDUSTRIAL ROTARY VANEVACUUM PUMP SYSTEMS
Vacuum levels to29.9” Hg.6 to 25 hp7 to 918 ACFM120 to 480 VAC1 & 3 phaseDIN motor starterHigh-flow polyesteror carbon filterAdjustable vacuumswitch20 to 250 galhorizontal or 80 galvertical tanks
Please call for pricing
VACUUM GAUGES
• Anodized aluminum• 3/8” npt end ports, 1/4” npt side ports
• 1.5” between ports
TM SERIES
27.1” Hg ultimatevacuumAll-pneumaticoperation, noelectricity requiredOperates on 50 psicompressed airMakes an excellentback-up pump
Includes 4-port manifold, filter, vacuum gauge,on-off-auto switch, adjustable vacuum switch,and filter-regulator for incoming air.
TM25TM50TM100
MODEL AIR USE(cfm)
FLOW @0” Hg
PRICE
4.08.016
132232
$ 1360.001464.001690.00
VENTURIVACUUM PUMPS 8990471
• 2.5” dia.• Plastic case• Dry$ 19.90
9767002• 2.5” dia.• SS case, wet• high accuracy$ 29.85
MANIFOLDS
4-PORT6-PORT8-PORT
MM-210MM-320MM-420
$ 27.5031.8036.10
Hardness (Shore A)Tensile strength (psi)
Tear strength (ppi)Mod.@ 25% elong. (psi)Mod.@ 50% elong. (psi)
Mod.@100% elong. (psi)Mod.@300% elong. (psi)
Elongation at break (%)Specific gravity
Compression set (%)(22 hrs @ 350°F)
Color
501400250
791201814648941.15
21
gray
SPECIFICATIONS
521700
2801001722935159001.11
17
trans.
301500 207
5273
1123249001.10
17
gray
401860
25058
101148304
13001.11
16
trans.
351548256
456084
33111491.13
8
trans.
EL78 EL80 EL1037T EL1040T EL1055T
T-7 MICRO SEAL.38” W. x .38” H.
874000 $ 6.20 /ft.
.16” min.compressed height
$23.00 / cornersplice
T-7 STD SEAL.63” W. x .63” H.
875000 $ 7.40 /ft.
.26” min.compressed height
$23.00 / cornersplice
T-7 LARGE SEAL1.00” W. x 1.00” H.
876000 $ 9.20 /ft.
.39” min.compressed height
$23.00 / cornersplice
872100 1.00” x 1.00” $ 6.45 /ft.872075 .71” x .71” $ 4.70 /ft.872050 .50” x .50” $ 3.80 /ft.872038 .38” x .38” $ 3.10 /ft.
ROTARY VANE VACUUM PUMP• 29.91” Hg, oil-flooded• 1/2 hp, 120 VAC, 5 CFM, quietIncludes 10’ cord, on/off switch,exhaust filter/muffler, 3/8” and 1/4”female NPT connections.
Gauge optionshown
.030
.040
.063
.085
.125
$11.25
13.60
18.40
24.25
34.90
10.40
12.60
17.05
21.90
31.55
9.75
11.80
15.70
20.75
29.50
9.35
11.35
15.10
20.00
28.40
1-99 100-199 200-599 600+THICKNESS
QUANTITY
sq.ft
/sq.ft
PRICING - CURED
30-49 50-99 100-199 200-599 600+sq.ft
© 2011 TORR TECHNOLOGIES INC
SQUARE PROFILES50 Duro (A) silicone(call for available rectangle profiles)
877038 .38” x .38” $ 2.95 /ft.877050 .50” x .50” $ 3.85 /ft.877075 .75” x .75” $ 6.40 /ft.877100 1.00” x 1.00” $ 9.10 /ft.
inches mm
.76
1.02
1.59
2.16
3.18
.030
.040
.063
.085
.125
$34.50
35.15
35.90
45.60
64.70
19.05
21.65
27.00
34.30
48.20
12.25
15.00
20.85
26.35
37.85
10.90
13.40
18.70
24.40
34.35
THICKNESSQUANTITY
/sq.ft
PRICING - UNCURED (minimum order 30 sq.ft.)
inches mm
.76
1.02
1.59
2.16
3.18
10.20
12.60
17.65
23.20
32.40
.125 $52.40 47.75 44.50 42.20
1-99 100-199 200-599 600+THICKNESSinches mm
QUANTITY (EL80 & EL78, 36”, 48”, & 54” WIDE)
sq.ft.
/sq.ft.3.18
P/N 807803807804807806807808
.600” (3 squares wide)
.800” (4 squares wide)1.200” (6 squares wide)1.600” (8 squares wide)
$ 3.80 / ft.4.90 / ft.7.10 / ft.9.20 / ft.
For use as a breather strip and to reducestress on diaphragm when using T-7 seal
INTERFLOW SHEET
INTERFLOW STRIP(807803 SHOWN)
502150 vacuum pump502F filter option502G gauge option502M manifold option18” hose & 4-port manifold
$ 515.00132.0052.0067.00
T-7 NANO SEAL.20” W. x .20” H.
873000 $ 4.10 /ft.
.10” min.compressed height
$23.00 / cornersplice
• To order, please specify compound, thickness, width, & length• Stock widths: 36” 48” 54” 72” (72” availability is limited)
• No minimum order for stock material• Special compounds (unique color, modulus, hardness, etc) available• Orders for non-stock thicknesses, widths, and compounds typically require a minimum order of 50 lin.ft.• Seamed blankets available in any width. Seam charges are: .063”, .085”, .125”: $27.00/ft. .030 & Interflow™: $30.00/ft.• Torr fabricates large molded sheets & custom contoured diaphragms
88501R
(800)845-4424(253)735-9115
fax (253)735-0437www.torrtech.com
Prices shown are in US dollars Prices subject to change without notice
TORR TECHNOLOGIES INC
PRICE LISTDecember 2011
1435 22ND ST NW AUBURN WA 98001
VACUUM BAGGING TOOL COMPONENTS
Frame Mount Vacuum Port Assembly- Includes SS flex hose, VP36 probe, brassconnectors, bulkhead fitting, frame bracket, andfasteners. Does not include vacuum release valve.
$ 59.25884100
VACUUM PORT HARDWARE
Frame Mount Vacuum Port Assembly w/ Valve- Includes items above plus high-temp vacuumrelease valve.
68.70884200
884040
$ 13.95
Type J insert ass’y. Installs in diaphragm
Type K insert ass’y. Installs in diaphragm
Type J molded pass-thru
Type J insert with set screw one end
Thru-tool type J plug assembly
Panel-mount standard type J jack. Installs in.875 dia. hole.
Silicone-insulated type J tc wire, 24 gauge,vacuum-tight, .105” dia., bondable, price/ft.
$ 25.00
27.20
54.60
13.70
46.00
6.25
3.10
88053J
88053K
88058J
88070J
88080J
88083J
88180J
THERMOCOUPLE HARDWARE
88053J88053K 88070J 88080J
88180J
88083J
Gas-spring, 380°F, 11” compressed, 17”extended. Last 3 digits indicate force (pounds).
Gas-spring, 380°F, 17.8” compressed, 27.8”extended. Last 3 digits indicate force (pounds).
Gas-spring lock for AC86, 380°F rated
Ball stud for AC86, 5/16-18 thread
Ball stud for AC10, 5/16-18 thread
Retaining clip for AC86
Retaining clip for AC10
Weld-on ball stud doubler (call for size req’d)
Bolt-on ball stud plate
Base bracket, aluminum, 2” ball height
Base bracket, steel, 1.5” ball height
Base bracket, steel, .75” ball height
$ 26.30
39.10
87.00
2.30
2.50
.90
1.10
13.40
45.00
34.00
34.00
34.00
AC86xxx
AC10xxx
860086
AC98
AC301
AC99
AC302
885604
885605
885601
885602
885522
GAS SPRINGS, GAS-SPRING HARDWARE
AC99
AC86090(90 LB)
885605
885604 885601
885602
885522AC98
88710R $ 86.8088710L 86.80Frame detent assembly (right orleft). Includes bracket, pin, pulltag, frame-mount wedge, andfasteners.
88710R/L
PRSN-500
FRAME DETENTSFrame detents helpprevent accidentalclosure of tools. Theyare typically used withT-7 hinges alone, orwith gas-springcylinders as an addedsafety device. Pleasespecify right- or left-hand when ordering.
PRSN-500 44.75Replacement pin
885500
HANDLES, SWING CLAMPS
886200886203
886200
Handle, aluminum. Mounts with 1/4-20 skt hdscrews (included), 5.20” spacing.
Swing clamp, stainless steel. Clamps tounderside of plate, mold, tooling, or into slot inkeeper (see below). 10-32 screws included.Contact Torr to determine correct grip length.
Keeper, surface mount. 1/4-20 screws included.
$ 19.80
57.00
37.00
885500
886200
886203
4
HINGES
Standard, Right
Standard, Left
$ 54.20
54.20
88501R
88501L
For tools with odd-number of hinges, useone more right-hand hinge than left-hand
LEAK DETECTORS
884100 884200
Aluminum bracket and 1/4”npt brass bulk-head fitting
1/4” npt vacuum releaseball valve, rated to 380°F.
884106
$ 26.10
1/4” npt x 6” long stain-less steel jumper hose
$ 947.00890000
560.00892000High Freq. Generator Spark Tester Kit - includesspark tester, fan tip, and case
Replacement fan tip for 892000 892010 56.00
890000 892000
8” brass brush tip for 892000 892030 129.20
884060
$ 8.50
Ultrasonic Leak Detector Kit - includes detectorwith built-in speaker and meter, hand-held probe,headphones, concentrator, and case.
Fixed, Right
Fixed, Left
54.20
54.20
88503R
88503L
54.20
54.20
88502R
88502L
T-7 hinge, laser cut andformed for use with Torr’sT-7 standard seal(875000). Nickel-platedsteel. Includes weld-onaluminum spacer blockand mounting hardware.
Short, Right
Short, Left
Available in 3 versions: Standard, ShortTravel, or Fixed-Pivot.
Custom versions available.
88058J
860086
© 2011 TORR TECHNOLOGIES INC
892000HDHeavy Duty High Freq. Generator Spark TesterKit - includes spark tester, fan tip, and case
625.00
RTV silicone adhesive,2.8 oz tube
RTV silicone adhesive,10.1 oz cartridge
1200 Primer, 1 oz *
$ 7.20
11.20
19.65
883203
883210
883501
ADHESIVE & PRIMER
*(no hazmat charges if shipped via UPS ground or air)
883203
883210 883501One ounce bottles of 1200 Primer are offered as aconvenience to our customers. Larger containersavailable through Dow Corning distributors.