Acids and Bases -...

Acids and Bases

Chapter 11

Acids and Bases in our Lives

Acids and bases are important substance in health, industry, and the environment.

One of the most common characteristics of acids is their sour taste.

• Lemons and grapefruits taste sourbecause they contain acids such as citric and ascorbic acid (vitamin C).

• Vinegar tastes sour because it contains acetic acid.


•We produce lactic acid in our muscles when we exercise.

•Acid from bacteria turns milks sour in the products of yogurt andcottage cheese.

•We have hydrochloric acid in our stomachs to help digest food and we take antacids, which are bases such as sodium bicarbonate, to neutralize the effects of too much stomach acid.


•In the environment, the acidity or pH of rain,

water, and soil can have significant effects.

•When rain becomes too acidic, it can dissolve

marble statues and accelerate the corrosion of

metals.

•In lakes and ponds, the acidity of water can affect

the ability of plants and fish to survive.

•The acidity of soil around plants affect their

growth. It can stop the plant from taking up

nutrients through the roots


•The lungs and kidneys are the

primary organs that regulate the pH of

body fluids, including blood and urine.

•Major changes in the pH of the body

fluids can severely affect biological

activities within the cells.

Buffers are present to prevent large

fluctuations.

Chapter 11 – Acids and Bases

• 11.1 Acids and Bases

• 11.2 Brønsted-Lowry Acids and Bases

• 11.3 Strengths of Acids and Bases

• 11.4 Dissociation Constants for Acids and Bases

• 11.5 Dissociation of Water

• 11.6 The pH Scale

• 11.7 Reactions of Acids and Bases

• 11.8 Acid-Base Titration

• 11.9 Buffers

11.1 - Acids and Bases

Describe and name acids and bases.

Acids

The term acid comes from the Latin

word acidus which means “sour.”

In 1887, the Swedish chemistry Svante

Arrhenius was the first to describe

acids as substances that produce

hydrogen ions (H+) when they dissolve

in water.

Acids are Electrolytes

Because acids produce ions in water, they are also electrolytes (can

conduct electricity).

Hydrogen chloride dissociates in water to give hydrogen ions, H+,

and chloride ions, Cl- :

It is the hydrogen ions that give acids a sour taste.

Naming Acids

Acids have two common formats:

Binary acids: HnX Hn = some number of H’s x=nonmetals

Examples: HCl, HBr, H, H2S…

Polyatomic acids: HnXOm XOm = polyatomic ion

Examples: H2SO4, H3PO4, HClO4…

Naming Acids

Binary acids: HnX

hydro[nonmetal –ic] acid

HCl

HBr

H2S

Change the ending of the nonmetal

to –ic and insert into the brackets.

hydro and acid do not change.

Polyatomic Ion Review

More O’s = -ate SO42-

Less O’s = -ite SO32-

Chlorine can form 4 polyatomic ions with oxygen:

ClO4-

ClO3-

ClO2-

ClO-

Naming Acids

Polyatomic Acids: HnXOm

[Polyatomic ion] acid-ate to –ic-ite to –ous

H2SO4

H3PO4

HClO3

Bases

• You may be familiar with some

household bases such as antacids, drain

cleaners, and oven cleaners.

• According to the Arrhenius theory,

bases are ionic compounds that

dissociate into cations and hydrogen

ions (OH-) when they dissolve in water.

• They are electrolytes.

Bases

Most Arrhenius bases are formed from a metal

from Groups 1 or 2 and one or more hydroxides

(OH-)

M(OH)n

M=metal

(OH)n = 1 or more hydroxide group

Examples: LiOH, Ca(OH)2

The hydroxide ions give bases common

characteristics such as a bitter taste or slippery feel.

Naming Bases

Bases have the same names that we used for ionic compounds.

LiOH

NaOH

Ca(OH)2

Al(OH)3










• 11.9 Buffers

11.2 – Brønsted-Lowry Acids and Bases

Identify the conjugate acid-base pairs for Brønsted-

Lowry acids and bases.

Arrhenius Acids and Bases

The definitions we gave in section 11.1 for acids and bases

were first described by Arrhenius. So we call acids and bases

described by H+ and OH- as Arrhenius acids and bases.

Arrhenius acid: substances that produce H+ in water.

Arrhenius base: substances that produce OH- in water.

Brønsted-Lowry

Acids and Bases

In 1923, a pair of scientists, J.N.

Brønsted and T.M. Lowry expanded the

definitions of acids and bases.

The shortcoming of the Arrhenius

definitions was that there were many

molecules that didn’t have OH- groups

that acted like bases.

A new set of definitions describing

Brønsted-Lowry acids and bases

included a greater number of molecules.

Brønsted-Lowry Acids and Bases

Brønsted-Lowry acid: a substance that donates a hydrogen ion, H+

Brønsted-Lowry base: a substance that accepts a hydrogen ion, H+

Arrhenius acid: produces H+

Arrhenius base: produces OH-

H+ = H3O+

• A free hydrogen, H+, does not actually exist in water.

• Its attraction to polar water molecules is so strong that the H+ bonds to a

water molecules and forms a hydronium ion, H3O+

Brønsted-Lowry Acids

• HCl donates its H+ to water producing H3O+ and Cl-

• By donating the H+, HCl is acting as the acid in this reaction.

• By accepting the H+, water is acting as a base in this reaction.

Brønsted-Lowry acid: donates H+

Brønsted-Lowry base: accepts H+

Brønsted-Lowry Bases

• Water gives an H+ to NH3 forming NH4+ and OH-

• NH3 acts as the base by accepting the H+

• Water acts as the acid by donating the H+



Water: a B-L acid and base

Water can act as both a Bronsted-Lowry acid

or base depending on what it reacts with.

Practice

Identify the reactant that is a Bronsted-Lowry acid and the reactant that is a

Bronsted-Lowry base:

HBr(aq) + H2O(l ) H3O+(aq) + Br-(aq)



Practice

Identify the reactant that is a Bronsted-Lowry acid and the reactant that is a

Bronsted-Lowry base:

CN-(aq) + H2O(l ) HCN(aq) + OH-(aq)



Conjugate Acid-Base Pairs

According to Bronsted-Lowry theory, a conjugate acid-base pair

consists of molecules or ions related by the loss of one H+ by an acid,

and the gain of one H+ by a base.

Every acid-base reaction contains two conjugate acid-base pairs

because an H+ is transferred in both the forward and reverse directions.


When an acid such as HF loses one H+, it becomes F-.

HF is the acid, and F- is its conjugate base.

* The conjugate is always what is formed by donating or accepting H+. So it is always on the products side.


When the base H2O gains an H+, its conjugate acid, H3O+ is formed.


Now if we combine the two previous examples:

Amphoteric Substances

Water can act like an acid when it donates H+ or as a base when it

receives H+

Substances that can act as both acids and bases are amphoteric.

Water is the most common amphoteric substance and its behavior

depends on the other reactant.

Water will donate H+ when mixed with a base and will accept H+

when mixed with an acid.

Amphoteric Substances

Another example of an amphoteric substance is bicarbonate, HCO3-.

With a base, HCO3- acts as an acid and donates H+ to give CO3

-.

With an acid, HCO3- acts as a base and accepts H+ to give H2CO3

Practice

Identify the conjugate acid-base pairs in the following reaction:

HBr(aq) + NH3(aq) Br-(aq) + NH4+(aq)










• 11.9 Buffers

11.3 – Strengths of Acids and Bases

Write equations for the dissociation of strong and weak acids;

identify the direction of reaction.

Strong vs Weak

In the process called dissociation, an acid or base separates into ions in water .

The strength of an acid is determined by the moles of H3O+ that are produced for each mole of acid

that dissolves.

The strength of a base is determined by the moles of OH- that are produced for each mole of base that

dissolves.

Strong acids and bases dissociate completely in water.

Weak acids and bases dissociate only slightly, leaving most of the initial acid or base undissociated.

Strong Acids

Strong acids are examples of strong electrolytes because they donate H+ so easily that their

dissociate in water is essentially complete.

When HCl (a strong acid) dissociates in water, H+ is transferred to H2O.

The resulting solution contains essentially only H3O+ and Cl-.

• Thus one mole of a strong acid dissociates in water to yield one mole of H3O+ and one

mole of its conjugate base.

• We write the equation for a strong acid, such as HCl, with a single arrow.

Weak Acids

Weak acids are weak electrolytes because they dissociate slightly in water, forming only a small

amount of H3O+ ions.

When acetic acid dissociates in water, it donates the H+ to water. However, only part of the acetic acid

molecules dissociate into ions. Most remain as molecules.

Thus one mole of a weak acid partially dissociates in water to give less than a mole of H3O+

and C2H3O2-We write the equation for a weak acid in aqueous solutions with a double arrow to

indicate that the forward and reverse reactions are at equilibrium.

Strong and Weak Acids

There are only 6 common strong acids:

Hydroiodic acid HI Heavily regulated

Hydrobromic acid HBr Used to make other molecules

and extracting ore

Perchloric acid HClO4 Rocket fuel ingredient

Hydrochloric acid HCl Stomach acid

Sulfuric acid H2SO4 Drain cleaner, lead-acid batteries

Nitric acid HNO3 Explosives ingredient

Strong and

Weak Acids

The rest are weak acids.

Diprotic Acids

Some weak acids, such as carbonic acid, are diprotic acids that have two H+, that dissociate one at a time.

For example, carbonated soft drinks are prepared by dissolving CO2 in water to form carbonic acid, H2CO3.

H2CO3 dissociates partially into HCO3- and H+ in water:

H2CO3(aq) + H2O(l) H3O+(aq) + HCO3

-(aq)

HCO3- is also a weak acid and will partially dissociate into CO3

2- and H+

HCO3-(aq) + H2O(l) H3O

+(aq) + CO32-(aq)

Diprotic Acids

Sulfuric acid, H2SO4, (a strong acid) is also a diprotic acid.

H2OS4 will dissociate completely into H+ and HSO4-:

H2SO4(aq) + H2O(l) H3O+(aq) + HSO4

-(aq)

HSO4- is a weak acid and dissociates only partially:

HSO4-(aq) + H2O(l) H3O

+(aq) + SO42-(aq)

Acid Summary

• A strong acid in water dissociates completely into ions.

• A weak acid in water dissociates only slightly into a

few ions but remains mostly as molecules.

Strong acid: HI(aq) + H2O(l) H3O+(aq) + I-(aq)

Weak acid: HF(aq) + H2O(l) H3O+(aq) + F-(aq)

Bases

As strong electrolytes, strong bases dissociate completely in water.

KOH(s) K+(aq) + OH-(aq)

Weak bases are weak electrolytes that are poor H+ acceptors and produce very few ions in

solution.

NH3(g) + H2O(l) NH4+(aq) + OH-(aq)

Bases in household

products

Direction of Reaction

There is a relationship between the components of each

conjugate acid-base pair:

Strong acids have weak conjugate bases.

As the strength of the acid decreases, the strengths of the base increases.

In any acid-base reaction, there are two acids and two bases.

However one acid is stronger than the other acid. And one

base is stronger than the other base.


-(aq)

Practice

By comparing their relative strengths, we can determine the

direction of a reaction.


-(aq)

Practice

Which direction will the reaction favor?

CO32-(aq) + H2O(l) HCO3

-(aq) + OH-(aq)

Practice

Which direction will the reaction favor?

HF(aq) + H2O(l) H3O+(aq) + F-(aq)










• 11.9 Buffers

11.4 – Dissociation Constants for

Acids and Bases

Write the expression for the dissociation

constant of a weak acid or weak base.

As we have seen, acids have different strengths depending on how much they

dissociate in water.

Because the dissociation of strong acids in water is essentially complete, the

reaction is not considered to be an equilibrium situation.

However, because weak acids in water dissociate only slightly, the ion products

reach equilibrium with the undissociated weak acid molecules.

Formic acid HCHO2, the acid found in bee and ant stings, is a weak acid. It

dissociates in water to form hydronium ion, H3O+, and formate ions CHO2

-

Writing Dissociation Constant Expressions

Because weak acids and bases reach an equilibrium when mixed in water, we

can write an equilibrium constant expression (just like in ch. 10).

aA + bB cC + dD Ka = [Products]

[Reactants]=

[D]d[C]c

[A]a[B]b

Ka is called the acid dissociation constant.

Practice

Write the equilibrium expression.

HCHO2(aq) + H2O(l) H3O+(aq) + CHO2

-(aq)

* Only (aq) states are included in equilibrium expressions. (s) and (l) are ignored (including water).

Writing Dissociation Constants

An equilibrium expression can also be written for weak bases:

CH3-N2(aq) + H2O(l) CH3-NH3+(aq) + OH-(aq)

Kb = [Products]

[Reactants]=

* Only (aq) states are included in equilibrium expressions. (s) and (l) are ignored (including water).

Dissociation Constants

• Just like in chapter 10, K’s less than 1 indicate that there is more reactant

than product.

• Which is in agreement of how we defined weak acids and weak bases. (Mostly

molecules (reactants) and a small amount of ions (products)).

• Strong acids and bases have very large K’s because its almost 100%

dissociated. These K’s are not usually bothered with.










• 11.9 Buffers

11.5 – Dissociation of Water

Use the water dissociation constant expressions to calculate the

[H3O+] and [OH-] in an aqueous solution.

In this section, we will use the dissociation constant expression and apply

it to a very important equilibrium reaction: water reacting with itself.

Water

• In many acid-base reactions, water is amphoteric, which means tat it can act either as an acid or a base.

• In pure water, there is a forward reaction between two water molecules that transfers H+ from one water molecule to the other.

• One molecule acts as an acid by losing H+ and the other water molecule that gains H+ acts as the base.

• Every time H+ is transferred between 2 water molecules, the products are one H3O+ and one OH-, which reacts in the reverse direction to re-form two water molecules.

Water Dissociation Constant, Kw

H2O(l) + H2O(l) H3O+(aq) + OH-(aq) Kw =

Experiments show that in pure water and 25°C, *ignore (s) and (l)[H3O+] = [OH-] =

If we plug the concentrations back into Kw:

Kw =

Neutral, Acidic, and Basic Solutions

The Kw applies to any aqueous solution at 25°C because all aqueous solutions

contain H3O+ and OH-.

When [H3O+] and [OH-] in a solution are equal, the solution is neutral.

However most solutions are not neutral; they have different concentrations of

[H3O+] and [OH-].

Neutral, Acidic, and Basic Solutions

If acid is added to water, there is an increase in [H3O

+] and a decrease in [OH-], which makes it an acidic solution.

If base is added to water, [OH-] increases and [H3O

+] decreases, which gives a basic solution.

However for any aqueous solution, whether it is neutral, acidic, or basic,

[H3O+][OH-] = 1.0 x 10-14

Using Kw to calculate [H3O+] and [OH-]

If we know [H3O+], we can use Kw to calculate [OH-] or if we know [OH-] we

can use Kw to calculate [H3O+].

Kw = [H3O+][OH-]

[OH-] =Kw

[H3O+][H3O

+] = Kw

[OH−]

Practice

A vinegar solution has a [OH-] = 5.0 x 10-12 M at 25°C. What is [H3O+] of the

vinegar solution? Is the solution acidic, basic, or neutral?

Practice

What is the [H3O+] of an ammonia cleaning solution with

[OH-] = 4.0 x 10-4 M? Is the solution acidic, basic, or neutral?










• 11.9 Buffers

Acids and Bases -...

Documents

Transcript of Acids and Bases -...