ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal...

of 9 /9
www.twrs.com Toll Free: 800.621.2777 Email: [email protected] TANK PRESSURE INLET PRESSURE BLAST PRESSURE ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS MODEL DESCRIPTION PART NO. BLAST HOSE Complete blast hose assemblies include base blast hose with nozzle holder and coupling, water line and ASSEMBLIES deadman control lines with deadman valve pre-assembled. Will connect to any SX model Accustrip System. 11SX 5/8" blast hose assemblies have ¾" nozzle holder threads and are recommended for use with #3 and #4 size nozzles. Blast hose assembly 5/8" x 25'. For model 11SX with standard pneumatic controls. 12SX or 13SX 1" blast hose assemblies have 50mm nozzle holder threads and are recommended for use with #6 and #8 size nozzles. 1¼" blast hose assemblies have 50mm nozzle holder threads and are recommended for use with #8 and #10 nozzles. 12SX Blast hose assembly 1" x 25'. Standard pneumatic controls. 12SX or 13SX Blast hose assembly 1" x 50'. Standard pneumatic controls. Blast hose assembly 1¼" x 50'. Standard pneumatic controls. EXTENSION Complete extension blast hose assemblies include base blast hose with couplings, water line and deadman BLAST HOSE control lines pre-assembled. Will connect to any SX model Accustrip System and any SX type blast hose ASSEMBLIES assembly. Blast hose extension assemblies fit between the blast hose assembly (harness) and the SX model Accustrip System, to extend the reach of the nozzle from the Accustrip System ® (blast pot). 12SX or 13SX Extension blast hose assembly 1" x 25'. Standard pneumatic controls. Extension blast hose assembly 1" x 50'. Standard pneumatic controls. Extension blast hose assembly 1¼" x 50'. Standard pneumatic controls. 8710-22117 8710-70125 8710-70100 8710-70101 8710-80126 8710-90028 8710-90023 Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com 8710-40007A: Pressure gauge, 0-160 psi 8710-17024: Wheel 11SX 8710-22104: Axle spacer 11SX 8710-98695: Axle 11SX 8710-22110: Ball valve 3/8" 4244-502-02: Branch tee ¼" FNPT x ¼" flare 4203-502-02: Fitting ¼" MNPT x ¼" flare 90 o 8710-92302: Drain cock 1/8" 8710-95331: Inlet air valve/choke valve 11SX 7019-511: Nut ½" -13 nylon insert 4102-006: Hose 1" red (per foot) (left to right) 7030-001: Label tag inlet pressure 7030-002: Label tag tank pressure 7030-003: Label tag blast pressure 4214-108-01: Hose coupling 1½" FNPT 4209-105: Crowfoot, 2-lug, ¾" 2302-205-50: Air filter 11SX 8710-98660: Blast pressure regulator 11SX 8710-98661: Moisture eliminator 11SX 11SX Parts, 1.0 cu. ft. Vessel with ¾" Piping

Embed Size (px)

Transcript of ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal...

Page 1: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

TANK

PRESSURE

INLET

PRESSURE

BLAST

PRESSURE

ACCUSTRIP SYSTEMHOSE ASSEMBLIES, 11SX PARTS

MODEL DESCRIPTION PART NO.

BLAST HOSE Complete blast hose assemblies include base blast hose with nozzle holder and coupling, water line andASSEMBLIES deadman control lines with deadman valve pre-assembled. Will connect to any SX model Accustrip System.

11SX 5/8" blast hose assemblies have ¾" nozzle holder threads and are recommended for use with #3 and #4size nozzles.

Blast hose assembly 5/8" x 25'. For model 11SX with standard pneumatic controls.

12SX or 13SX 1" blast hose assemblies have 50mm nozzle holder threads and are recommended for use with #6 and #8 size nozzles. 1¼" blast hose assemblies have 50mm nozzle holder threads and are recommendedfor use with #8 and #10 nozzles.

12SX Blast hose assembly 1" x 25'. Standard pneumatic controls.

12SX or 13SX Blast hose assembly 1" x 50'. Standard pneumatic controls.

Blast hose assembly 1¼" x 50'. Standard pneumatic controls.

EXTENSION Complete extension blast hose assemblies include base blast hose with couplings, water line and deadmanBLAST HOSE control lines pre-assembled. Will connect to any SX model Accustrip System and any SX type blast hoseASSEMBLIES assembly. Blast hose extension assemblies fit between the blast hose assembly (harness) and the SX model

Accustrip System, to extend the reach of the nozzle from the Accustrip System® (blast pot).

12SX or 13SX Extension blast hose assembly 1" x 25'. Standard pneumatic controls.

Extension blast hose assembly 1" x 50'. Standard pneumatic controls.

Extension blast hose assembly 1¼" x 50'. Standard pneumatic controls.

8710-22117

8710-70125

8710-70100

8710-70101

8710-80126

8710-90028

8710-90023

Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

8710-40007A: Pressure gauge, 0-160 psi

8710-17024: Wheel 11SX

8710-22104: Axle spacer 11SX8710-98695: Axle 11SX

8710-22110: Ball valve 3/8"

4244-502-02: Branch tee ¼" FNPT x ¼" flare

4203-502-02: Fitting ¼" MNPT x ¼" flare 90o

8710-92302: Drain cock 1/8"

8710-95331: Inlet air valve/choke valve 11SX

7019-511: Nut ½" -13 nylon insert

4102-006: Hose 1" red (per foot)

(left to right)7030-001: Label tag inlet pressure7030-002: Label tag tank pressure7030-003: Label tag blast pressure

4214-108-01: Hose coupling 1½" FNPT

4209-105: Crowfoot, 2-lug, ¾"

2302-205-50: Air filter 11SX

8710-98660: Blast pressure regulator 11SX

8710-98661: Moisture eliminator 11SX

11SX Parts, 1.0 cu. ft. Vessel with ¾" Piping

Page 2: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

8710-22100: Pop-up head 11SX, 12SX, 13SX

8710-22102: Pop-up gasket 11SX, 12SX, 13SX

8710-22103: Pop-up guide 11SX

8710-24120: Screen 11SX, 12SX

8710-24121: Lid 11SX, 12SX

2014-300: Breather Vent 1/8"

8710-80246: Pop-up stem 11SX, 12SX, 13SX

4202-500-00: Straight swival 1/8" m x 1/8" f

8710-92301: Clamp8710-98503: Clamp O-ring

8710-95330: Hose barb ¾" MNPT x 1" hose

4205-106: Swival insert 1" w/ Gasket4205-106-99: Gasket

8710-92031: Clamp 1" hose

(Not Shown)8710-98306: Decal large ARMEX8710-98307: Decal small ARMEX7031-007: Decal depressurize warning7031-008: Decal grounding warning

8710-98507: Finishing plug 3/4”

8710-98632: Screen hardware

8710-98662: Media flow control valve 3/4” 11SX

8710-98663: Automatic air valve ¾"11SX

8710-36101: Media shut-off valve 1¼" BSPT 11SX8710-98502: Clamp fitting 11/4”MNPT

ACCUSTRIP SYSTEM11SX PARTS

8710-92031: Clamp 1" hose

8710-95331: Inlet air valve/choke valve 11SX

11SX Accustrip System® Parts, 1.0 cu. ft. Vessel with ¾" Piping

Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

8710-22115: Media valve 11SX (optional)

Thompson Valve II

8710-98503: Clamp, O-ring8710-92301: Clamp

4203-502-02: Fitting ¼" MNPT x ¼" flare 90o

Page 3: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

ACCUSTRIP SYSTEM12SX PARTS

4201-502-02: Straight swival ¼" m x ¼" f

2401-508: Ball valve

2302-208-50: Air filter 12SX, 13SX

8710-40007A: Pressure gauge, 0-160 psi

4211-108: Crowfoot, 4-Lug, 1½"

4205-108: Hose barb 1½" MNPT x 1½" hose

8710-36100: Media flow cntrl valve

8710-34100: Auto air valve 1½"

8710-98501: Clamp fitting 1½" FNPT

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

8710-98508: Clamp fitting 1½" hose

2014-300: Breather Vent 1/8"

4201-500-00: Straight swival 1/8" m x 1/8" f

7032-005: Handle grips

7031-008: Decal grounding warning

7030-001: Label tag inlet pressure

8710-98578: Filter 2 micron ¼" male

7031-007A: Decal depressurize warning

12SX Accustrip System® Parts, 2.0 cu. ft. Vessel with 1½" Piping

8710-98307: Decal small ARMEX

8710-36101: Media shut-off valve

8710-92301: Clamp8710-98503: Clamp O-ring

4228-509: Hose clamp 1½"

4102-008: Hose 1½" red (per foot)

4228-509: Hose clamp 1½"

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

8710-92301: Clamp8710-98503: Clamp, O-RingThompson Valve II

8710-98503: Clamp O-ring8710-92301: Clamp

8710-31000: Media valve (optional)

8710-98502: Clamp ftg1¼"MNPT

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

Page 4: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

(left to right)7030-002: Label tank pressure7030-000: Label differential pressure7030-003: Label blast pressure

4214-108-01: Hose coupling 1½" FNPT

8710-98562: Moisture eliminator 12SX

8710-92302: Drain cock 1/8"

8400-100-40: Pressure gauge console

8710-36003: Bypass/vent/water valve 7040-107: Axle 12SX7019-519: Nut ¾" -10 nylon insert

8710-22100: Pop-up head 11SX, 12SX, 13SX

8710-22102: Pop-up gasket 11SX, 12SX, 13SX

8710-22101: Pop-up guide assembly

8710-80246: Pop-up stem 11SX, 12SX, 13SX

8710-24120: Screen 11SX, 12SX

8710-24121: Lid 11SX, 12SX

8710-98307: Decal small ARMEX

8710-98632: Screen hardware

7046-003: Wheel 12SX

ACCUSTRIP SYSTEM12SX PARTS

12SX Accustrip System® Parts, 2.0 cu. ft. Vessel with 1½" Piping

8710-36003: Bypass/vent/water valve

4259-304-05: Male garden hose connection

2401-508: Ball valve 12SX, 13SX

2000-007: Regulator assy 12SX,13SX

8710-40007A: Pressure gauge, 0-160 psi2010-013: Differential pressure gauge

8710-40007A: Pressure gauge, 0-160 psi

8710-36003: Bypass/vent/water valve

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

8710-98578: Filter 2 micron ¼" male

8710-80145: Quick disconnect ¼" MNPT body

4227-305-99: Garden hose washer4227-304-05: Female garden hose connection

2300-004-02: Y strainer

Page 5: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

ACCUSTRIP SYSTEM13SX PARTS

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

2401-508: Ball valve 12SX, 13SX

2302-208-50: Air filter 12SX, 13SX

8710-40007A: Pressure gauge, 0-160 psi

4211-108: Crowfoot, 4-Lug, 1½"

4205-108: Hose barb 1½" MNPT x 1½" hose

8710-36100: Media flow cntrl valve 12SX,13SX

8710-34100: Auto air valve 1½"12SX,13SX

8710-98501: Clamp fitting 1½" FNPT

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

8710-98508: Clamp fitting 1½" hose

2014-300: Breather Vent 1/8"

4201-500-00: Fitting 1/8" MNPT x 1/8" flare straight

7031-008: Decal grounding warning7030-001: Label tag inlet pressure

8710-98578: Filter 2 micron ¼" male

4201-502-02: Straight swival¼" x ¼" f

13SX Accustrip System® Parts, 3.0 cu. ft. Vessel with 1½" Piping

8710-98307: Decal small ARMEX

8710-36101: Media shut-off valve

8710-92301: Clamp8710-98503: Clamp O-ring

4102-008: Hose 1½" red (per foot)

4228-509: Hose clamp 1½"

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

7031-008: Decal grounding warning

8710-92301: Clamp8710-98503: Clamp, O-Ring

Thompson Valve II

8710-98503: Clamp O-ring8710-92301: Clamp

8710-98502: Clamp fitting1¼"MNPT

8710-31000: Media valve (optional)

4228-509: Hose clamp 1½"

Page 6: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

(left to right)7030-002: Label tank pressure7030-000: Label differential pressure7030-003: Label blast pressure

4214-108-01: Hose coupling 1½" FNPT

8710-98561: Moisture eliminator 13SX

8710-92302: Drain cock 1/8"

8400-100-40: Pressure gauge console

8710-36003: Bypass/vent/water valve 8400-100-42: Axle 13SX7019-519: Nut ¾" -10 nylon insert

8710-22100: Pop-up head 11SX, 12SX, 13SX

8710-22102: Pop-up gasket 11SX, 12SX, 13SX

8710-22101: Pop-up guide assembly

8710-80246: Pop-up stem 11SX, 12SX, 13SX

8710-98630: Screen 13SX

8710-98631: Lid 13SX

8710-98632: Screen hardware

7046-006: Wheel 13SX

ACCUSTRIP SYSTEM13SX PARTS

13SX Accustrip System® Parts, 3.0 cu. ft. Vessel with 1½" Piping

8710-36003: Bypass/vent/water valve

4259-304-05: Garden hose connection, 1/2” M x 3/4” M

2401-508: Ball valve 12SX, 13SX

2000-007: Regulator assy 12SX,13SX

8710-40007A: Pressure gauge, 0-160 psi2010-013: Differential pressure gauge

8710-40007A: Pressure gauge, 0-160 psi

8710-36003: Bypass/vent/water valve

8710-98578: Filter 2 micron ¼" male

8710-80145: Quick disconnect ¼" MNPT body

4227-305-99: Garden hose gasket4227-304-05: Female garden hose connection

1/2” x 3/4”2300-004-02: Y strainer

Page 7: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

ACCUSTRIP SYSTEM PNEUMATICCONTROL VALVE ASSEMBLY

Standard Pneumatic Control Valve Assembly—Thompson Valve® II

2229-000: Control valve8710-96001: Quick disconnect ¼" MNPT plug

4101-002: Hose ¼" black (per foot)

8710-96100: Quick disconnect ¼" MNPT body

4203-500-02: Fitting 1/8" MNPT x ¼" flare 90º

2013-402: Dust eliminator

8710-80145: Quick disconnect ¼" MNPT body

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

4101-002: Hose ¼" black (per foot)

4200-302-00: Hose barb 1/8" MNPT x ¼" push on

4200-302-00: Hose barb 1/8" MNPT x ¼" push on

4200-302-00: Hose barb 1/8" MNPT x ¼" push on

1/8" MNPT to auto air valve

¼" MNPT to inlet air

3

2

1

Standard Pneumatic ControlValve Assembly—Media Valve

2013-402: Dust eliminator ¼" MNPT

2229-002: 4-way pneumatic control valve (no fittings)

8710-96001: Quick disconnect ¼" MNPT plug

8710-96103: Quick disconnect ¼" MNPT body

4101-002: Hose ¼" black (per foot)

8710-96100: Quick disconnect ¼" MNPT body

4203-500-02: Fitting 1/8" MNPT x ¼" flare 90º

2013-402: Dust eliminator

8710-80145: Quick disconnect ¼" MNPT body

4203-502-02: Fitting ¼" MNPT x ¼" flare 90º

4101-002: Hose ¼" black (per foot)

4200-302-00: Hose barb 1/8" MNPT x ¼" push on

4200-302-00: Hose barb 1/8" MNPT x ¼" push on

4200-302-00: Hose barb 1/8" MNPT x ¼" push on

1/8" MNPT to auto air valve

¼" MNPT to inlet air

Page 8: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]

Axxiom Manufacturing Co., Inc.• 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com

ACCUSTRIP SYSTEM MEDIA VALVE PARTS

Media Valve

8710-22112: Media valve pipe 11SX8710-98683: Media valve pipe 12SX,13SX

8710-36003: Bypass valve

3006-104: Street elbow ½" galv

3029-104-09: Nipple ½" x 2" galv

8710-98681: Body media valve

8710-92301: Clamp

8710-98503: Clamp gasket

8710-98682: Media valve orifice sleeve

8710-98534: Media valve orifice sleeve O-ring

8710-98535: Media valve actuator O-ring

8710-98559: Piston media valve

8710-98536: Media valve piston O-ring

8710-98548: Media valve wrist pin

8710-98541: Media valve actuator

8710-98537: Media valve actuator bolts

4203-500-00: Fitting 1/8" MNPT x 1/8" flare 90º

See detail below

4200-302-00: Hose barb 1/8" MNPT x ¼" push on hose

4100-002: Hose ¼" black push on

4200-302-02: Hose barb ¼" MNPT x ¼" push on hose

8710-96102: Q.D. ¼" FNPT plug close media valve8710-96101: Q.D. ¼" FNPT plug open media valve

8710-98638: Media valve open hose assembly (port 4) 8710-98637: Media valve close hose assembly (port 2)

MODEL DESCRIPTION PART NO.

MEDIA VALVE 11SX - complete media valve assembly.12SX or 13SX - complete media valve assembly.

REBUILD KIT Media valve rebuild kit (items in bold). Includes clamp gasket, O-rings, actuator bolts and wrist pin.

8710-221158710-31000

8710-31100

Page 9: ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS8710-98307: Decal small ARMEX 7031-007: Decal depressurize warning 7031-008: Decal grounding warning 8710-98507: Finishing plug 3/4 ”

www.twrs.comToll Free: 800.621.2777Email: [email protected]