ACCSQ SEMINAR, 20-22 NOV 2001, CAMBODIA - ASEAN | …€¦ · · 2015-12-20ACCSQ SEMINAR, 20-22...

SINGAPORE PRODUCTIVITY AND STANDARDS BOARD

STANDARDS AND CONFORMITYSTANDARDS AND CONFORMITYASSESSMENT SYSTEMS INASSESSMENT SYSTEMS IN

SINGAPORESINGAPORE

Presented byPresented by

Mr Teo Nam KuanMr Teo Nam Kuan

General ManagerGeneral Manager

Standards and Metrology GroupStandards and Metrology Group

Singapore Productivity and Standards BoardSingapore Productivity and Standards Board

ACCSQ SEMINAR, 20-22 NOV 2001, CAMBODIA


Standardisation and Conformity AssessmentStandardisation and Conformity Assessment

StandardisationStandardisation

Accreditation and CertificationAccreditation and Certification

Technical RegulationsTechnical Regulations



National Standards Body– Singapore Productivity and Standards Board (PSB)

Singapore National Committee of IEC



Memberships in:Memberships in:

–– ISOISO

–– IECIEC


Singapore’s Involvement in ISOSingapore’s Involvement in ISOGENERAL ASSEMBLY:• Principal officers

- President- Vice-President (policy)- Vice-President (technical

management)- Treasurer- Secretary-General

COUNCIL

CENTRALSECRETARIAT

Council standingcommittees:• Finance

• Strategies

Ad hocadvisory groups

TECHNICALMANAGEMENT

BOARD

REMCO

Technicaladvisory groups

Technicalcommittees

Policy developmentcommittees:

• CASCO• COPOLCO

• DEVCO

• Delegates of:- Member bodies- Correspondent members- Subscriber members

PSB has been aPSB has been amember of ISO sincemember of ISO since19661966

Singapore held the ISOSingapore held the ISOPresidency from 1997-Presidency from 1997-19981998

Singapore holdsSingapore holdsmemberships in thememberships in thepolicy devtpolicy devtcommitteescommittees

Elected member from 1992-Elected member from 1992-1994 and 1999-20001994 and 1999-2000

26 P-memberships26 P-membershipsand 110 O-and 110 O-membershipsmemberships

AppointedAppointedmember ofmember ofCPSGCPSG


P-membership in ISO CommitteesP-membership in ISO Committees

1. TC 281. TC 28

2. TC 28/SC42. TC 28/SC4

3. TC 28/SC63. TC 28/SC6

4. TC 34/SC114. TC 34/SC11

5. TC 1045. TC 104

6. TC 104/SC16. TC 104/SC1

7. TC 104/SC47. TC 104/SC4

Petroleum products and lubricantsPetroleum products and lubricants

Classifications and specificationsClassifications and specifications

Bulk cargo transfer,Bulk cargo transfer,

accountability,inspection & reconciliationaccountability,inspection & reconciliation

(Convenor of WG 8 - Bunkering Protocol)(Convenor of WG 8 - Bunkering Protocol)

Animals an vegatables fats and oilsAnimals an vegatables fats and oils

Freight ContainersFreight Containers

General purpose containerGeneral purpose container

Identification and communicationIdentification and communication

(Convenor for WG2 - Electronic Seal)(Convenor for WG2 - Electronic Seal)



8. TC 150/SC18. TC 150/SC1

9. TC 150/SC29. TC 150/SC2

10. TC 150/SC410. TC 150/SC4

11. TC 17611. TC 176

12. TC 176/SC212. TC 176/SC2

13. TC 176/SC313. TC 176/SC3

14. TC 20714. TC 207

15. TC 207/SC115. TC 207/SC1

16. TC 207/SC316. TC 207/SC3

17. TC 207/SC417. TC 207/SC4

18. TC 207/SC518. TC 207/SC5

MaterialsMaterials

Cardiovascular ImplantsCardiovascular Implants

Bone and joints replacementsBone and joints replacements

Quality management and quality assuranceQuality management and quality assurance

Quality systemsQuality systems

Supporting technologiesSupporting technologies

Environmental managementEnvironmental management

Environmental management systemsEnvironmental management systems

Environmental labellingEnvironmental labelling

Environmental performance evaluationEnvironmental performance evaluation

Life cycle assessmentLife cycle assessment



19. TC 21219. TC 212

20. CASCO20. CASCO

21. JTC 1/SC221. JTC 1/SC2

22. JTC 1/SC722. JTC 1/SC7

23. JTC 1/SC1723. JTC 1/SC17

24. JTC 1/SC2924. JTC 1/SC29

25. JTC 1/SC3125. JTC 1/SC31

26. TC 22226. TC 222

Clinical laboratory testing and in-vitroClinical laboratory testing and in-vitro

diagnostic test systemdiagnostic test system

Committee on conformity and assessmentCommittee on conformity and assessment

Character sets and information codingCharacter sets and information coding

Software engineeringSoftware engineering

Card and personal identificationCard and personal identification

Coded representation of picture, audio andCoded representation of picture, audio and

multimedia and hypermedia informationmultimedia and hypermedia information

Automatic data captureAutomatic data capture

Personal financial planningPersonal financial planning

SINGAPORE PRODUCTIVITY AND STANDARDS BOARDYYYY-MM-DD.XXX.11

Organization chartOrganization chart

IEC COUNCILNational Committees

COUNCIL BOARD

CONFORMITY ASSESSMENTBOARD

Management of Certification

TECHNICALCOMMITTEES

INDUSTRYSECTORBOARDS

TECHNICALADVISORY

COMMITTEES

COMMITTEE OF ACTIONManagement of InternationalConsensus Standards Work

EXECUTIVE COMMITTEE(IEC Officers)

MANAGEMENTADVISORY

COMMITTEES

CASCHEMES

CENTRALOFFICE

The Executive

Council Board - Mr Robert Chuaelected from 1998 to 1999 and from 2000 to 2002 as Member.

IEC member- since 1990.IEC Council - Mr Robert Chuaas Chairman, Singapore NationalCommittee (IEC), is a Member.

Observer member in 135Technical Committees(TCs)/Subcommittees (SCs).Participating member in 2 TC/SC.

IECEEMember -CB Scheme

PSBhostingIEC AsiaPacificRegionalCentre

IEC Asia Pacific Steering Group -member and incoming Chairman


Membership in IEC CommitteesMembership in IEC Committees

P-membershipP-membership–– SC 17D on Low-voltage Switchgear and ControlgearSC 17D on Low-voltage Switchgear and Controlgear

AssembliesAssemblies

–– TC 35 on Primary Cells and BatteriesTC 35 on Primary Cells and Batteries

O-membershipO-membership–– 64 Technical Committees64 Technical Committees



Participates inParticipates in

–– ASEAN Consultative Committee on Standards andASEAN Consultative Committee on Standards andQuality (ACCSQ)Quality (ACCSQ)

–– Pacific Area Standards Congress (PASC)Pacific Area Standards Congress (PASC)

–– APEC Sub-Committee on Standards andAPEC Sub-Committee on Standards andConformance (SCSC)Conformance (SCSC)

–– Asia-Europe Meeting (ASEM)Asia-Europe Meeting (ASEM)

NATIONAL STANDARDISATION

ElectricalandElectronic

Chm :RennyYeo

Dy Chm :Lim SayLeong

Building andConstruction

Chm: GohChong Chia

Dy Chm : TanTian Chong&

Dr Tam ChatTim

InformationTechnology

( * )

Chm :WilsonTan

Services

Chm: MsJennieChua

Dy Chm :LiakTeng Lit

Chemical

Chm : DrPeterChan

Dy Chm: MsLam KitWing

MedicalTechnology

Chm :AlokMishra

Dy Chm :Wong YewSin

GeneralEngineeringand Safety

Chm : TanPui Guan

Dy Chm :Ng ThinTeng

QualityManagement

Chm : LauJoo Ming

EnvironmentalManagement

Chm : WalterYam

STANDARDS COUNCIL

Chm : Dr Lock Kai Sang

Dy Chm : Prof Lim Mong King

SECRETARIAT(provided by PSB)

TC TC TC TC TC TC TC TC TC

StandardsCommitteeTechnicalCommittee

( * ) Secretariat providedby IDA

SNC (IEC)

Chm :RobertChua

Food

Chm :WongMongHong

Dy Chm :Dr ChuaSin Bin

TC

SNC (IEC)Singapore National Committee ofthe International ElectrotechnicalCommission

Chm Chairman

DyChm

DeputyChairman


The Singapore Standardisation Strategy 2001The Singapore Standardisation Strategy 2001

Our Vision … ...Our Vision … ...

“To be a global standardisation leader through“To be a global standardisation leader through

excellence in the use of standardisation for social excellence in the use of standardisation for socialandand

economic betterment of businesses, industrieseconomic betterment of businesses, industriesandand

consumers in Singapore”.consumers in Singapore”.


The Singapore Standardisation Strategy 2001The Singapore Standardisation Strategy 2001

Our Mission … ...Our Mission … ...

“To improve productivity, quality and market“To improve productivity, quality and marketaccess for businesses and industries, protectaccess for businesses and industries, protectconsumer interests and enhance safety, healthconsumer interests and enhance safety, health

and environmental conditions for Singaporeand environmental conditions for Singaporethrough the use of standardisation”.through the use of standardisation”.

DELIVERABLES

ISDOs ISOIECITU

Regional Groups PASC

APEC/SCSCACCSQ

Free TradeAgreements

/ MutualRecognitionAgreements

SDOs (International /other national)

Consortia

Singapore NSB

• Set SingaporeStandards (guided bythe SingaporeStandards Council

• Align to InternationalStandards

• Advise Standards &Conformance Policies

• Use Standards toimpact Productivity &Quality

• Use Standardisation tofacilitate trade

• Support technicalregulations

FacilitateTrade

EnhanceSafety &Health

ImproveProductivity

ProtectEnvironment

Transfer /Create

Knowledge

PSB


Accreditation and CertificationAccreditation and Certification

Singapore Accreditation Council (SAC)

Many certification bodies– PSB Corporation, Singapore Test Services Pte Ltd, etc.


Singapore Accreditation Council (SAC)Singapore Accreditation Council (SAC)

Established in 1996

Carries out independent accreditation ofconformity assessment activities


Singapore Accreditation CouncilSingapore Accreditation Council

Scope of Accreditation

Management system certification– Quality Systems

– Environmental Management Systems

Product certification (to be launched in Nov 2001)

Laboratory accreditation– SAC-SINGLAS

– national scheme that evaluates the technical

competence of testing and calibration laboratories

Inspection bodies


Singapore Accreditation CouncilSingapore Accreditation Council

99

152152

Accreditation in Figures:

Accredited Quality SystemCertification Bodies

Accredited Laboratoriesunder SAC-SINGLASScheme



Some examples… …

Consumer Protection (Safety Requirements)

Registration Scheme - CP Scheme

Public Utilities (Electricity) Regulations

Ministry of Manpower (MOM) Factories Order

Act


The Consumer Protection (Safety

Requirements) Registration Scheme was

launched on 1 June 1991

The objective of the scheme is to protect the

safety of consumers

Registration is mandatory and is based on

type testing

Consumer Protection (Safety Requirements)Consumer Protection (Safety Requirements)Registration Scheme - CP SchemeRegistration Scheme - CP Scheme


Products Standards

1. Cooking range : SS146 Part 2:7 / IEC335-2-6

2. Hairdryer : SS146 Part 2:9 / IEC 335-2-23

3. Iron : SS146 Part 2:1 / IEC 335-2-3

4. Microwave oven : SS146 Part 2:10 / IEC 335-2-25

5. Television / Video : SS 143 / IEC65 display unit

6. Video cassette : SS143 / IEC65recorder

7. Room : IEC335-2-40 air-conditioner

Categories of Controlled GoodsCategories of Controlled Goods


8. Table fan/standing fan : SS365 / IEC342-1/ 60335-2-80

9. High-fidelity set : SS143 / IEC65

10. Rice cooker : IEC335-2-15

11. Refrigerator : IEC335-2-24

12. Vacuum cleaner : SS146 Part 2:4 / IEC 335-2-2

13. Immersion water heater : IEC335-2-74

14. Kettle : IEC335-2-15

15. Washing machine : SS146 Part 2:3 / IEC 335 -2-7

16. Table/standing lamp : SS263 Part 6 / IEC598-2-4

17. Toaster, grill, roaster : IEC335-2-9/6/13 hot plate



18. Any other audio products : SS143 / IEC65

19. Wall fan/ceiling fan : IEC342-1 / IEC 60335-2-80 & SS360

20. Adaptor : IEC742 (electrical appliances)

IEC65 (electronic appliances)

IEC950 (computer/telephonic appliances)

21. Mobile split air- conditioner : IEC335-2-40

22. Coffee maker, slow cooker : IEC335-2-15 steam boat & similar appliances



23. Laser disc set23. Laser disc set : SS143 / IEC65: SS143 / IEC65

24. Mixer, blender, mincer24. Mixer, blender, mincer : IEC335-2-14: IEC335-2-14 & similar appliances & similar appliances

25. Air cooler25. Air cooler : IEC60335-2-98: IEC60335-2-98

26. Home computer system26. Home computer system : SS337 / IEC950: SS337 / IEC950

27. Decorative lighting27. Decorative lighting fixture fixture : SS263:Part 10 / IEC598-2-20: SS263:Part 10 / IEC598-2-20




28. Components of the LPG gas system - Hose : SS233 Regulator : SS281 Valve : SS294

29. Gas cooker : BS5386:Part 3,4, BS3193

30. Portable cooking gas appliance : SS401

31. Gas canister : SS400

For details, refer to URL: http://www.psb.gov.sg/safety


Recognition of Test Reports

- Local Reports– SAC-SINGLAS accredited laboratories

- Overseas Reports (Present)– IECEE CB Scheme– List of recognised laboratories– MRA with SAC-SINGLAS

- Overseas Reports (Future)– MRAs (include SAC-SINGLAS MRA)– IECEE CB Scheme

Consumer Protection (Safety Requirements)Registration Scheme - CP Scheme


Safety AuthoritySafety Authority

The SAFETY MarkThe SAFETY Mark



14 Prescribed Articles14 Prescribed Articles

Administered by the Energy Market AuthorityAdministered by the Energy Market Authority

(EMA)(EMA)

Pre-market ApprovalPre-market Approval

Post-market SurveillancePost-market Surveillance


The 14 Items Regulated By EMA



Recognition of Test Reports:Recognition of Test Reports:

Local reportsLocal reports

–– Electrical & Electronic Test Centre, PSB Electrical & Electronic Test Centre, PSB

–– SAC-SINGLAS Accredited Laboratories SAC-SINGLAS Accredited Laboratories

Overseas reportsOverseas reports

–– IECEE CB SchemeIECEE CB Scheme

–– Reports issued by laboratories of accreditation bodies, Reports issued by laboratories of accreditation bodies,which are MRA partners of SAC-SINGLAS e.g. IANZ,which are MRA partners of SAC-SINGLAS e.g. IANZ,NATA, HOKLAS, A2LANATA, HOKLAS, A2LA



Rationalisation of the Consumer Protection

Scheme and the Public Utilities Regulations



The Factories (Singapore Standards and

Codes Of Practice) Order 2001

Ministry of Manpower (MOM)

Lays down the legal requirements for ensuring

the safety and protecting the health of workers

employed in factories and other workplaces

Refers to 15 Singapore Standards and Codes

of Practice


The Factories (Singapore Standards andThe Factories (Singapore Standards andCodes Of Practice) Order 2001Codes Of Practice) Order 2001

– CP 14, Code of Practice for scaffolds;

– CP 20, Code of Practice for suspended scaffolds;

– CP 23, Code of Practice for formwork;

– CP 27, Code of Practice for factory layout;

– CP 37, Code of Practice for the safe use of mobile cranes;

– CP 50, Code of Practice for safety in welding and cutting (andother operations involving the use of heat);

– CP 62, Code of Practice for safe use of tower cranes;

– CP 63, Code of Practice for the lifting of persons in workplatforms suspended from cranes;

Requirements:Requirements:


– CP 74, Code of Practice for selection, use andmaintenance of respiratory protective devices;

– CP 76, Code of Practice for selection, use, care andmaintenance of hearing protectors;

– CP 79, Code of Practice for safety management systemfor construction worksites;

– CP 84, Code of Practice for entry into and safe working inconfined spaces;

– SS 217, Specification for industrial safety signs;

– SS 473, Specification for personal eye-protectors - Part 1:General requirements; and

– SS 473, Specification for personal eye-protectors - Part 2:Selection, use and maintenance.

Requirements:Requirements:

The Factories (Singapore Standards andThe Factories (Singapore Standards andCodes Of Practice) Order 2001Codes Of Practice) Order 2001


Please visit us atPlease visit us atwww.standards.org.sgwww.standards.org.sg

ACCSQ SEMINAR, 20-22 NOV 2001, CAMBODIA - ASEAN | …€¦ · · 2015-12-20ACCSQ SEMINAR, 20-22...

Documents

Transcript of ACCSQ SEMINAR, 20-22 NOV 2001, CAMBODIA - ASEAN | …€¦ · · 2015-12-20ACCSQ SEMINAR, 20-22...