Accessories for ergonomic workplace - Fiamgroup2 Accessories for ergonomic workplaces Fiam, together...
Transcript of Accessories for ergonomic workplace - Fiamgroup2 Accessories for ergonomic workplaces Fiam, together...
• Magnesium telescopic arms• Cartesian arms• Articulated cartesian arms• Assisted Cartesian arms• Positionning devices • Balancing arms - Balancers• Auxiliary grips
Accessories for ergonomic workplace
2
Accessories for ergonomic workplaces
Fiam, together with its solutions, offers a wide range of services in order to optimize, in terms of safety and ergonomics, the productive processes of its customers: from the choice of the tools and the accessories to the suggestions about correct operator’s posture and the correct use of ergonomic tools.
For all further details, please contactFiam Technical Consultancy Service.
FiAm service:AlwAys close to its customer
The focus of ergonomics is a strong point of Fiam solutions. All solutions are designed and built to reduce any kind of fatigue for operator, to ensure maximum safety of use and to increase production performance.On these issues Fiam also offers a qualified consulting and training activity.
To deepen the issues on ergonomics and safety in industrial tightening operations, ask to Fiam Customer Service [email protected] for reading our publication.
In order to improve productivity and product quality safeguarding operator’s health, it is strategically important to design the workplace in a ergonomic and rational way. To do that, parts to be assembled and tools to be used must be easy to collect and handle.
3
Many factors have to be considered in order to design an ergonomic workplace, namely:l Using last generation tools which eliminate the beginning operator’s risk factors. The tools must be chosen according to the type of joint, of screws, of operator’s position at workplace
(sitting or standing).lUse of accessories that, according to their combination, can solve specific logistic and productive
needs. Accessories need to be specified according to tool type, type and dimensions of workplace, type and dimensions of workpiece.
lAccurate design of workplace which has to consider ideal geometry and encumbrances in order to improve operator’s comfort, reducing his fatigue. As an example you have to consider the application and operator’s position (if vertical or horizontal) and the type of handle to be used.
lCheck how tools and accessories are used by the operators. Monitoring activities are often essential to optimize productivity while avoiding risky situations for the operators.
toolcHANGe
correctDesiGN
AccessorycHoice
moNitoriNGActivities
4
Magnesium competes with many other polymeric materials and is increasingly used in industrial contexts, from automotive, through aeronautics to biomechanics as it offers many benefits:
•itislighterthanaluminum(-30%),makingthetooleasiertohandle
•itishighlyresistanttowearandimpact,comparabletothecarbonfiberarms
•ithasexcellentvibrationdampingandelectro-magneticshieldingproperties
•itbearsayieldstresssimilartothatofaluminiumalloys
•the“alodine”®treatmentensuresthatitislong-lastingandcorrosionresistant
•itisfullyrecyclableandbiocompatiblewithhumancontact,makingitecological.
Why magnesium?
Bt-mG mAGNesium telescoPic Arms
New range of telescopic arms in magnesium alloy, designed and produced by Fiam. Conform for use with any kind of tool (screwdrivers/nutrunners, drills, tappers) being extremely resistant to mechanical stress thus guaranteeing reliability and long life span, thanks to accurate manufacturing process and applied innovative materials.Designedwithdifferent telescopingextensionelements (3 forallmodelsand2 forBT-MG10...), theyareconform for working areas according to various productive needs: from a minimum of 45,5 cm to a maximum ofover2meters.Double terminal coupling guarantees great handiness and maximum freedom of action also for inclined tightening operations.They can be easily installed on existing workplaces on ceiling or wall using a simple plate with reduced dimensions.
5
•WideOperatingArea
•Widerotation ofthetoolaround itsaxis
• They eliminate any counterblow to operator’s hands
• They eliminate vibrations caused by the tool
• Reduce the worker’s fatigue in handling the equipment
• They assure a comfortable and immediate taking of the tool next to the point of work
• Enable the operator to keep a good wrist position
• They prevent musculoskeletal diseases caused by repeated mechanical stresses
• Fiam BT-MG arms absorbe the reaction 30% more than the other arms on the work point
Standard equipment (supplied with arm) Accessories available upon request
•Universalclampwith 2kitsofscrewswithdifferent lengths to install tools with different diameterfrom26.5upto50mm
•Eco-friendlypackaging•Useandmaintenancemanual
• Toolholderaccessory(1)forelectricscrewdriverseTensilcod.692079180.
Manages9positionsofrotations.
6
Model CodeMax torque (Nm) in lb
Max work range (mm)
Min work range (mm)
Ø maxtool (mm)
692071420
692071421
692071409
692071401
692071404
692071410
692071402
692071405
692071407
692071411
692071403
692071406
692071408
10
10
15
15
15
40
40
40
40
70
70
70
70
625
825
860
1070
1580
860
1070
1580
2120
860
1070
1580
2120
455
655
505
575
745
505
575
745
925
505
575
745
925
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
26.5-50
BT-MG 10 800
BT-MG 10 1000
BT-MG 15 800
BT-MG 15 1000
BT-MG 15 1500
BT-MG 40 800
BT-MG 40 1000
BT-MG 40 1500
BT-MG 40 2000
BT-MG 70 800
BT-MG 70 1000
BT-MG 70 1500
BT-MG 70 2000
88.50
88.50
132.70
132.70
132.70
354
354
354
354
619.50
619.50
619.50
619.50
(1)
Tool holder accessory (1)
WORKING AREA
WORKING AREA
WORKING AREA
Front view work surface
Work surface seen from above
Side view work surface
Front view work surface
WORKING AREA
Work AreA WheN USiNg horizoNtAlly(arm fixed on vertical wall)
Work AreA WheN USiNg VertiCAlly (arm fixed to the ceiling)
z
x
y
x
y
z
y
x
ANGLE= 60°
WORKING AREA= 270°
WORKING AREA = 180°
ANGLE = 60°
L - min
L - min
L - max
L - max
Ve
rt
iCA
l W
All
CeiliNg
CeiliNg
L - min
L - max
L - m
in
L - m
ax
7
cArtesiAN Arms
The new Fiam Cartesian arms represent fundamental solutions for ergonomics workplace. They are completely designed and manufactured by Fiam and can be used with any type of tool withadiameterupto50mmandweightupto11kg.Auniversalclamp is supplied but, upon request, numerous accessories are available for correctly fitting different Fiam tools to ensure maximum safety and functionality.
Availablein2versions:
• Cartesian arms• Articulated Cartesian arms• Assisted Cartesian arms
All models are also available with a position monitoring device for processing the angular and linear displacement of the tool on the work point(seepage14).
Thanks to these arms, all work operations take place without any oscillation and their movements are extremely fluid and flowing and this translates into a significant increase in work precision, the consequent quality of the production process as well as ergonomics for the operator.
For more information, contact the Fiam Technical Service.
• They eliminate any counterblow on the operator’s hands• They eliminate the need for force in holding the tool• They drastically reduce or eliminate vibrations• They allow the maintenance of a good wrist position• Maintain the perpendicularity of the tool at the work point• Improve work accuracy and the quality of the production process• Extremely high performance even with self-tapping / self-drilling screws• By improving the coverage of the work area, they reduce the fatigue of the hand / arm system
operator
BC Cartesian Arm
BC25 Pk with automatich pushing force
BCA Cartesian Arm
BC40 lk with pneumatic locking device for auto feed screwdrivers with automatic forward bit stroke
8
SturdyverticalcolumnIts increased diameter avoids any swings
RobuststructureColumns of vertical and horizontal axis made of tempered and chrome steel for longer lifespan
DoublebalancerprovidedTwo balancers are available to support the tool (weight up to 11Kg.)andotherhangingelements (models for heavier tools are available upon request)
BaseplateStable drilled base plate designed to prevent swinging risk
BallrecirculatingrunnersVertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and accuracy
Universalclampto be used with
every type of tool with diameterupto50mm
Bc cArtesiAN Arms
Uponrequest:adjustableverticalstrokelimiters(clamps with rubber protection) are available to prevent the horizontal arm from getting too close to the work area (and to avoid damaging the workpiece with the tool)
Safetymagnetwhichkeeps
thehorizontalstrokelocked-andthereforethe
tool-whenthearm is in the rest
position
Rubberbumpers
Magnet
“Rubberbumpers”usefultocushionthelimit
switchesin horizontal movement
9
lateral extension up to 760 mm
Accessories available upon request
•Modelswithpositionningdevice(seepage16)
Standard equipment
•Universalclamp•2balancers •Instructions for assembly and use•Eco-friendlypackaging
ØA [mm] ØB [mm]
BC 5-12-25 82 100
BC40 170 200 AB
60°
60°
ø8,
25nr
.3 x
BASE DETAIL
760 mm
The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimumspace(R1-R2).
STROKE
B
R2 max
R1 max
A A
STROKE
R2 min
R1 min
B
Description Code Nm in lb kg mm mm mm mm mm
Cartesian Arm BC5
Cartesian Arm BC12
Cartesian Arm BC25
Cartesian Arm BC40
Cartesian Arm BC40/7
Cartesian Arm BC40/11
692031030
692031031
692031032
692031033
692031038
692031040
5
12
25
40
40
40
44,25
106,2
221,25
354
354
354
2
2
2
2
7
11
32 ÷ 50
32 ÷ 50
32 ÷ 50
32 ÷ 50
32 ÷ 50
32 ÷ 50
1041
1065
1065
1047
1047
1047
160
160
160
176
176
176
285-445
285-445
285-445
274-450
274-450
274-450
600-760
600-760
590-750
564-740
564-740
564-740
Max
torq
ue M
ax lo
ad
Max
tool
dia
met
er
Arm
dim
ensi
on
A Arm
r
egul
atio
n
B R1 min
-max
R2 min
-max
10
SturdyverticalcolumnIts increased diameter avoids any swings
Uponrequest:adjustableverticalstrokelimiters(clamps with rubber protection) are available to prevent the horizontal arm from getting too close to the work area (and to avoid damaging the workpiece with the tool)
RobuststructureColumns of vertical and horizontal axis made of tempered and chrome steel for longer lifespan
Doublebalancer provided
Two balancers are available to support
the tool (weight up to
11Kg.)andotherhanging elements
(models for heavier tools are available
upon request)
BaseplateStable drilled base plate designed to prevent swinging risk
BallrecirculatingrunnersVertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and accuracy
Universalclampto be used with every type of tool withdiameterupto50mm
BcA ArticulAteD cArtesiAN Arms
“Flag”openingfrom0to120°
Possibility of arranging the arm both with the
joint on the right and on the left depending on
the field of work to be coveredandupto120°.For an excellent reaction
to the torque it is advisable to work with
the angular opening between90°and120°.
11
The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimumspace(R1-R2).
lateral extension up to 730 mm - ”Flag” opening from 0 to 120°
A
R2 maxR1
min
B
120°
A
R2 min R1 max
B
120°
ØA [mm] ØB [mm]
BCA 5-12-25 82 100
BCA40 170 200 AB
60°
60°
ø8,
25nr
.3 x
BASE DETAIL
Possibilityofarrangingthearmbothwiththejointontherightandontheleftdependingonthefieldofworktobecoveredandupto120°.Foranexcellentreactiontothetorqueitisadvisabletoworkwiththeangularopeningbetween90°and120°.
Description Code Nm in lb kg mm mm mm mm mm
Articulated Cartesian Arm BCA5
Articulated Cartesian Arm BCA12
Articulated Cartesian Arm BCA25
Articulated Cartesian Arm BCA40
692031034
692031035
692031036
692031037
5
12
25
40
44,25
106,2
221,25
354
2
2
2
2
32 ÷ 50
32 ÷ 50
32 ÷ 50
32 ÷ 50
1041
1065
1065
1047
160
160
160
176
110-260
110-260
110-260
110-260
610-730
610-730
610-730
610-730
Max
torq
ue M
ax lo
ad
Max
tool
dia
met
er
Arm
dim
ensi
on
A Arm
reg
ulat
ion
B R1 m
in-m
ax
R2 min
-max
Accessories available upon request
•Models for tools weighing more than2Kg•Modelswithpositionningdevice(seepage16)
Standard equipment
•Universalclamp•2balancers •Instructions for assembly and use•Eco-friendlypackaging
1212
SturdyverticalcolumnIts increased diameter avoids
any swings
RobuststructureColumns of vertical and horizontal axis made of
tempered and chrome steel for longer lifespan
DoublebalancerprovidedTwo balancers are available to support the tool
(weightupto11Kg.)andotherhangingelements(models for heavier tools are available
upon request)
BaseplateStable drilled base plate designed to prevent
swinging risk
Ball recirculating
runnersVertical and
horizontal movements
running on ball recirculating
runners to guarantee
smoothness, handiness and
accuracy
Universalclampto be used with every type of tool with diameter upto50mm
BC25PKASSISTEDCARTESIANARMS-WITHAUTOMATICPUSHINGFORCE
Automaticdownwardpushingdevice(PUSHKIT): operators do not need to apply
force when tightening
Pneumaticpushingforceregulatorset according to the type of screw used.
Equippedwithoperatingpressureindicator.
“Dualaction”pneumaticpushing:while returning up after tightening, the arm
automatically returns to the rest position, ready for tightening again
Adjustableverticalstroke
limiter(clamps with rubber
protection) to prevent the horizontal arm from
getting too close to the work area (and to
avoid damaging the workpiece with the tool)
1313
Accessories available upon request
•Models for tools weighing more than4Kg
Standard equipment
•Universalclamp•Adjustableverticalstrokelimiter •ConnectionCableforeTensilelectricscrewdrivers •2balancers •Instructions for assembly and use•Eco-friendlypackaging
ØA [mm] ØB [mm]
BC25PK 82 100AB
60°
60°
ø8,
25nr
.3 x
BASE DETAIL
lateral extension up to 760 mmthe arm works with 1 pneumatic signal output: so it can be used with pneumatic screwdrivers that have a pneumatic signal output and with eTensilelectricscrewdriversthathaveexternalclutchadjustmentcombinedwiththeTPU2powersupply.
760 mm
ForairandelectricscrewdriverswithstartleverFor safety reasons, the arms can only be used with models of eTensil screwdrivers that have external clutch adjustment with only lever tightening.
The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimumspace(R1-R2).
STROKE
B
R2 max
R1 max
A A
STROKE
R2 min
R1 min
B
Description Code Nm in lb kg mm mm mm mm mm
Cartesian Arm BC25PK 692031054 25 221,25 4 32 ÷ 50 1041 160 285-445 590-750
Max
torq
ue M
ax lo
ad
Max
tool
dia
met
er
Arm
dim
ensi
on
A Arm
r
egul
atio
n
B R1 min
-max
R2 min
-max
1214
SturdyverticalcolumnIts increased diameter avoids
any swings
RobuststructureColumns of vertical and horizontal axis made of
tempered and chrome steel for longer lifespan
DoublebalancerprovidedTwo balancers are available to support the tool
(weightupto11Kg.)andotherhangingelements(models for heavier tools are available
upon request)
BaseplateStable drilled base plate designed to prevent
swinging risk
BallrecirculatingrunnersVertical and horizontal movements running on ball recirculating runners to guarantee smoothness, handiness and accuracy
Universalclampto be used with every
type of tool with diameterupto50mm
BC40LKASSISTEDCARTESIANARMS-WITHPNEUMATICLOCKINGDEVICE
For CA auto-feed screwdrivers with automatic forward bit stroke
Adjustableverticalstroke
limiter(clamps with rubber
protection) to prevent the horizontal arm from
getting too close to the work area (and to
avoid damaging the workpiece with the tool)
TheBC40LK
armis for use with
auto-feedscrewdrivers
with automatic forward bit
stroke, which provide an automatic
pushing force on the
workpiece to aid operators so that they do not
have to apply force when tightening.
1315
BC40LKASSISTEDCARTESIANARMS-WITHPNEUMATICLOCKINGDEVICE
The horizontal bar can be fixed in different positions (on the internal or most external screws) to allow to reach wider working area while occupying minimumspace(R1-R2).
lateral extension up to 760 mm
SafetylockingsystemWhen there is no air or power supply, the system stops automatically to prevent the pneumatic device from slipping and avoid any risk of crushing and/or accidental movement.
PneumaticlockingSpecial device that counteracts the “recoil” caused by the tool bit during tightening and redirects this force to the mechanical arm rather than that of the operator.The pneumatic locking device is powered directly by the tightening system to which the arm is connected. It is sufficient to quickly connect the practical connection hose provided with the arm to the screwdriver.
Accessories available upon request
•Models for tools weighing more than4Kg
Standard equipment
•Universalclamp•Connectionhosecompletewithpneumaticfittingsforconnectingtheauto-feedingscrewdriver •Instructions for assembly and use•Eco-friendlypackaging
ØA [mm] ØB [mm]
BC40PK 170 200AB
60°
60°
ø8,
25nr
.3 x
BASE DETAIL
Description Code Nm in lb kg mm mm mm mm mm
Cartesian Arm BC40PK 692031055 40 354 4 32 ÷ 50 1041 160 274-450 564-740
Max
torq
ue M
ax lo
ad
Max
tool
dia
met
er
Arm
dim
ensi
on
A Arm
r
egul
atio
n
B R1 min
-max
R2 min
-max
STROKE
B
R2 max
R1 max
A A
STROKE
R2 min
R1 min
B
16
• The positioning system facilitates the operator who is guided in assembly operations
• Reduces the mental overload of the operator
• Reduces the fatigue due to the attention given by the continuous supervision of operations
• Ease of programming and immediate visual and sound feedback lead to ease of work
• They eliminate any counterblow to the operator’s hands
• They eliminate vibrations
• Enable the operator to keep a good wrist position
• They assure a comfortable and immediate taking of the tool next to the point of work
• Fiam BT-MG arms absorbe the reaction 30% more than the other arms on the marketplace
mAGNesium telescoPic Arm witH PositioN moNitoriNG Device
Magnesium telescopic arms can be fitted with a position monitoring device and, combined with the tPM monitoring unit, help make tightening systems very suitable for“Poka-Yoke”processes,while increasing the efficiency and speed of the production cycle.In fact, they not only make the work station more ergonomic forthehand-armsystem,buttheman-machinecollaborationalso increases performance: the system supports operators and guides them through assembly operations and sequences, reducing mental fatigue due to the continuous attention required to control such operations. A system, entirely designed and built by Fiam, to achieve theadvantages of a Smart Factorywhere technology allowsabetterman-machinecollaboration.
17
mAGNesium telescoPic Arm witH PositioN moNitoriNG Device
the guided positioning system operates as follows:•Itlocatesthescrewdriverpositionatthevarioustighteningpointsandstoresthem(upto35positions/programandupto8programs)
•Thescrewdriverisenabledwhenitisatthefirststoredposition(theTPMdisplayshowsPOS-OKandthePOS-OKLEDonthetelescopicarmlights)
•Eachtimeascrewistightened,theREMAINdisplayshowshowmanyscrewsareleft,indicatingthatitisready to pass on to the next screw
•TheENDsignalcomesonwhenthestoredcycleiscomplete,andgivestheOKtoproceedwithanewwork cycle
•Thememorizationprocesstakesplaceby“self-learning”:itissufficienttocarryoutaworkcycleandateach tightening the system stores the position realized and the number of screws
•Duringthememorizationprocess,aprecisiontolerancecanbeprogrammedwithintherange:forexample,foralengthof1mm±10%approximately;fortheangle0.1degrees(maximumtolerances)
There are two models which can be paired with all Fiam tightening solutions (air screwdrivers together with TOM):
-ArmsBT-MG...TMP-1:modelswith single angle movement detection
-ArmsBT-MG...TPM-2:modelswith angle and linear movement detection.
Click here and discover in the video how the positioning system works
tightening systemswith guided positioning
Available for:
Bttelescopic arms
BCCartesian arms
BCAArticulated cartesian arms
18
Howtoorder?The tightening system with a position monitoring device, consists of: •Telescopicorcartesianarmcompletewithsensorsfortheposition’sdetection(tochooseinthechartatnextpage)•TPMmonitoringunitcod.692078019(featuresatthenextpage)•Connectingcabletochooseaccordingtotheconfigurationofuse(seetablechartatnextpage)
Cable TPM/TOM
Cable TPM/CA
CableTPM/CT2500A
TOM
Power Supply Unit TPU 2
TOM
CT2500A
Cable TPM/TCS 3-V
Cable TPM/TPU2
Cable TPM/XPAQ
Air Screwdriver
Air Automatic Screw Feeding System
Electronic AutomaticScrew Feeding System
High Tech dC Screwdrivers
Electric Screwdriver
Electronic High Tech dC Tightening System
Code 692079181
Code 692079185
Code 692079182
Code 692079181
Code 692079183
Code 692079184
+
+
+
+
+
+
+
+
+
+
++
TPM 1/2
Telescopic Arm BT... TPM
Cartesian Arm BC... TPM
Articulated Cartesiam Arm BCA... TPM
* To connect the devices together, refer to product catalogs or contact the Fiam Technical Consultancy Service.
*
*
*
19
ModelFor Screwdriver/Auto feed screwdrivers Code lenght (mt)
692079185
692079181
692079182
692079183
692079184
692079181
3
3
3
3
3
3
Connecting cable TPM with TPU 2
Connecting cable TPM with TOM
Connecting cable TPM with CT2500 A
Connecting cable TPM with CA for XPAQ (through CT2500 A)
Connecting cable TPM with TCS 3-V
Connecting cable TPM with CA (through TOM)
eTensil electric screwdrivers
Air screwdrivers (with 2CS)
Hi-tech DC screwdrivers X-PAQ
CA auto feed screwdrivers with X-PAQ
Hi-tech DC screwdrivers CB
CA air auto feed screwdrivers
TPM-TighteningPositionMonitor
Connectingcables
Standard equipment
•Universalclamp•2balancers
TheBCACartesianarmsarearrangedonlywiththeTPM2devicebeingconfigured to monitoring the angular and linear positions.ModelsBC40/7andBC40/11withpositionmonitoringdeviceareavailable only on request.
Model CodeMax torque (Nm)
Max work range (mm)
Min work range (mm)
692071422
692071412
692071415
692071423
692071413
692071416
692071418
692071424
692071414
692071417
692071419
692031042
692031043
692031044
692031045
692031050
692031051
692031052
692031053
692071425
692071426
692071427
692071428
692071429
692071430
692071431
692071432
692071433
692071434
692071435
692031046
692031047
692031048
692031049
15
15
15
40
40
40
40
70
70
70
70
5
12
25
40
5
12
25
40
15
15
15
40
40
40
40
70
70
70
70
5
12
25
40
630
700
870
630
700
870
1050
630
700
870
1050
445 min - 285 max
445 min - 285 max
445 min - 285 max
450 min - 274 max
110 min - 260 max
110 min - 260 max
110 min - 260 max
110 min - 260 max
630
700
870
630
700
870
1050
630
700
870
1050
445 min - 285 max
445 min - 285 max
445 min - 285 max
450 min - 274 max
985
1195
1705
985
1195
1705
2245
985
1195
1705
2245
600 min - 760 max
600 min - 760 max
590 min - 750 max
564 min - 740 max
600 min - 760 max
600 min - 760 max
590 min - 750 max
564 min - 740 max
985
1195
1705
985
1195
1705
2245
985
1195
1705
2245
600 min - 760 max
600 min - 760 max
590 min - 750 max
564 min - 740 max
BT-MG 15 800 - TPM2
BT-MG 15 1000 - TPM2
BT-MG 15 1500 - TPM2
BT-MG 40 800 - TPM2
BT-MG 40 1000 - TPM2
BT-MG 40 1500 - TPM2
BT-MG 40 2000 - TPM2
BT-MG 70 800 - TPM2
BT-MG 70 1000 - TPM2
BT-MG 70 1500 - TPM2
BT-MG 70 2000 - TPM2
BC 5 – TPM2
BC 12 – TPM2
BC 25 – TPM2
BC 40 – TPM2
BC A 5 – TPM2
BC A 12 – TPM2
BC A 25 – TPM2
BC A 40 – TPM2
BT-MG 15 800 - TPM1
BT-MG 15 1000 - TPM1
BT-MG 15 1500 - TPM1
BT-MG 40 800 - TPM1
BT-MG 40 1000 - TPM1
BT-MG 40 1500 - TPM1
BT-MG 40 2000 - TPM1
BT-MG 70 800 - TPM1
BT-MG 70 1000 - TPM1
BT-MG 70 1500 - TPM1
BT-MG 70 2000 - TPM1
BC 5 – TPM1
BC 12 – TPM1
BC 25 – TPM1
BC 40 – TPM1
MO
DEL
S W
ITH
SiN
gle
AN
gle
MO
VEM
ENT
DE
TEC
TIO
N
te
leS
Co
PiC
te
leS
Co
PiC
BC
BC
BC
A
MO
DEL
S W
ITH
AN
gle
AN
D l
iNe
Ar
M
OV
EMEN
T D
ET
ECT
ION
•Instructionsforassemblyanduse•Eco-friendlypackaging
Model Code Dimensions (mm) Feed
692078019 208 x128 x 42 24 V, 110/230V - 50/60 HzTPM - Monitoring Unit
technical features: tPM - tightening Position Monitor
•Lengthaccuracy(mm):1±10%•Angleaccuracy(degrees):0,1°•Maximumnumberofscrewsperprogram:35•Numberofprograms:8•Totalnumberofscrews:280 (35perprogramm,8programs)
in lb
132.70
132.70
132.70
354
354
354
354
619.50
619.50
619.50
619.50
44.25
106.25
221.25
354
132.70
132.70
132.70
354
354
354
354
619.50
619.50
619.50
619.50
44.25
106.25
221.25
354
44.25
106.25
221.25
354
20
There are numerous accessories that allow to use all Cartesian Arms with Fiam tools.They are all entirely designed and manufactured by Fiam for:•correctly bracket the tool without damaging them and therefore compromising their functionality•alwaysensurethe maximum Arm performance with any tool you use
Also available adjustable vertical travel limiters (clamps with rubber protection).
Accessories AvAilABle uPoN reQuest
A Collar bracket Ø 32 for auto feed screwdrivers on BC and BCA models 692039195
A Collar bracket Ø 36 for auto feed screwdrivers on BC and BCA models 692039196
B Collar bracket for SD electronic XPAQ screwdrivers on BC and BCA models 692039099
C Collar bracket for 15C and 26C 4/5 screwdrivers on BC and BCA models 692039006
C Collar bracket for 26C 8/10/12 screwdrivers on BC and BCA models 692039007
D Vertical stroke limiter ring for BC and BCA 12 /25 models 692039088
D Vertical stroke limiter ring for BC and BCA 40 models 692039089
D Vertical stroke limiter ring for BC and BCA 5 models 692039109
e Collar bracket for eTensil screwdrivers on BC and BCA models 692039108
F Increased balancer upon request
g Upper collar for clamping eTensil screwdrivers to BC and BCA arms 681041034
Modello Codice
21
BA20BALANCINGARM–upto20Nm
This balancing arm can be used with air and electric screwdrivers, drills, tappers, riveting machines, etc. with diameters varying from 25 to 50 mm and with a maximum of 20 Nm tightening torque.TheBA20balancingarmensuresvery high precision work since the tool is kept perfectly perpendicular to the piece being assembled: therefore it avoids any accidental damages to the materials for a higher quality of the finished product.
Work can also be carried outhorizontally or on two axes at the same time, simply by choosing the specific adapter.
The arm with standard springs can support up to 2 kg. weight; tosupportaweightupto2.5kg.,thestandard springs must be replaced with the reinforced ones (upon request).
Standard equipment
Accessories available upon request
•Benchbaseplate•Eco-friendlypackaging
•Tosupporttoolsofupto2,5Kg.max.itisnecessary to order the reinforced springs (cod.692059010)
AdaptersforBA20availableuponrequest(tobeorderedseparately)
•Adapterstoworkon theverticalaxis
•Adaptertoworkon thehorizontalaxis
•Adaptertoworkon twoaxis
For adapters with different diameter, please contact Fiam Technical Consultancy Service
• They eliminate any counterblow action on the operators hands
• They eliminate the need for force in holding the tool
• They drastically reduce or eliminate vibrations
• They allow the maintenance of a good wrist position
• They maintain the perpendicularity of the tool at the point of work
technical features
Max. work range 850mm
Min. work range 520mm
Max. torque 20Nm
Max. load (with standard springs) 2kg
Max. load (with reinforced springs) 2,5kg
Max. rotation angle 360°
Ø max. tool from25to50mm
CodeModel
BA20 balancing arm 692031009
AD 25/40
AD 40/50
692059008
692059009
25÷40
40÷50
Ø internaladjustable mmCodeAdapter
AD 36 692059014 36
Ø internal mmCodeAdapter
AD 36/2AX 692059015 36
Ø internal mmCodeAdapter
22
Balancerwithbuilt-insupplyIndicated to support and to feed at the same time air tools.
BAlANcer
This suspension device for tools allows the operators: •working safely (tools and accessories suspended in a bad way may hit the operator) and comfortably, eliminating any effort to lift the tool•keeping a good wrist position
• They eliminate the need for force in holding the tool
• The tool by remaining always in the set position, ensures an easy and safe grip
BA50BALANCINGARM–upto50Nm
This balancing arm can be used with screwdrivers (air and electric), drills, tappers, riveting machines, etc. with diameters varying from 25 to 50 mm and with a maximum of 50 Nm tightening torque.This system guarantees extreme working precision because the tool is kept perfectly perpendicular to the piece being assembled: therefore it avoids any accidental damages to the materials for a higher quality of the assembled product.
• They eliminate any counterblow action on the operators hands
• They eliminate the need for force in holding the tool
• They drastically reduce or eliminate vibrations
• They allow the maintenance of a good wrist position
• They maintain the perpendicularity of the tool at the point of work
The balancer is provided with a hose that can be connected to the
main air feed so that the toolis directly supplied.
TheBA50balancingarmwithstandard springs can support from 0,7 to 2kg weight; if it is necessary to fit a heavier tool (weighing up toamaximumof4Kg.)specialreinforced springs are available upon request.
1,2 ÷2,5 1350 1/4” gas
min - max mm
Capa
city
Kg
691021202
Code
Cabl
e le
ngth
Mal
e co
uplin
g
Type
0,4 ÷ 1
1 ÷ 2
2 ÷ 4
4 ÷ 6
6 ÷ 8
8 ÷ 10
1600
1600
2000
2000
2000
2500
690011160
690021160
690041200
690061200
690081200
690101250
min - max mm Code
Capa
city
Kg
Cabl
e le
ngth
The system guarantees at the same time the maximum care of the tool and greater productivity
CodeModel
BA50 balancing arm 692031008
Accessories available upon request
•Tosupporttoolsofupto4Kg.max.itisnecessarytoorder2reinforcedsprings(cod.692059022)
Standard equipment (supplied with balancing arm)
•Adjustable adapter•Benchbaseplate•Eco-friendlypackaging
For balancing arms that must support torque ofmorethan50Nmorweightsofmorethan4Kg.,pleasecontactFiam Technical Consultancy Service
technical features
Max. work range 1000mm
Min. work range 630mm
Max. torque 50Nm
Max. load (with standard springs) 2kg
Max. load ( with reinforced springs) 4 kg
Max. rotation angle 360°
Ø max. tool 50mm
23
tool Holster
Practical holster to be fixed to the work bench in order to house pistol tools.This indispensable adjustableaccessory manufactured in a sturdy resin, avoids damage to the tools by guaranteeing a longer lifespan.The holster is also extremelyversatile since inside it has a removableadapter so that it can be used for a large number of tools.
AuXiliAry GriP
When carrying out more than one assembly cycle or when the torques are higher than 4 Nm (straight tools) or than 10 Nm (pistol tools), it is recommended to use an auxiliary grip which permits a reduction of thetorque reaction dividing work load on both hands(ISO11148-6standard).For more information please contact Fiam Technical Consultancy Service.
For15Cand26Cstraightmodels,itisrecommendedtousethecollarbracket for arm stands and auxiliary grips Code692039006for15C(allmodels)and26C(mod.4,5)Code692039007for26C(mod.8,10,12)
• They eliminate any counterblow on the operator’s hands
• They allow hand-arm reaction to be released on two hands
• They drastically reduce or eliminate vibrations
• Properly replaced tools are not dangerous for operators
FP-43-24 from 32 up to 42,5 681010100
CodeØ tool - mmModel
36
38
40
43
46
CSE…P, CDE…P
15C, 26C (mod. 4 and 5)
26C (mod. 8, 10 and 12)
CY…P
CY…
681041200
681041205
681041240
681041011
681041002
CodeFor screwdriver series
ø internal(mm)
Quality ManagementSystem Certificate
Environmental ManagementSystem Certificate
www.fiamgroup.com [email protected]
Fiam Utensili Pneumatici SpaViale Crispi 12336100 Vicenza - ItalyTel. +39.0444.385000 Fax +39.0444.385002
Fiam FranceSuccursale 73, cours Albert Thomas69003 Lyon - FranceTel. +33 (0)9 70 40 73 85
Fiam EspañaSucursal Travessera de Gràcia, 11, 5ª planta 08021 Barcelona, EspañaTel. +34.636808112
Meet us on:
Octob
er2019-7
9|P
rintedon
rec
ycledpa
perforthesafegu
ardofthe
env
ironm
ent|C
op
yrig
ht
Fiam
Sp
a. T
he u
naut
horis
ed d
istr
ibut
ion
and/
or r
epro
duct
ion
of a
ll or
par
t of
thi
s pu
blic
atio
n is
str
ictly
for
bidd
en.
Choose Fiam also for bits, sockets,
inserts, bushes, air hoses, nipples
and whatever is needed
to set up
efficient and
productive
workplaces.
www.fiamgroup.com
Areyoulookingforapokayoketighteningsystemtostreamlineyourproductionprocess?Doyouwanttoeliminatescrapsincreasingthequalityofthefinishedproduct?
DiscoverTOMonhttps://tom.fiamgroup.com