BORING ANDFACING HEADS

LIVE CENTERS

ACCESSORIES CATALOG

SKODA LIVE CENTERS

PARTS FOR HEAVY DUTY LIVE CENTERSMorse 2-Point 3-Ring 4-Sleeve 5-End Plug 6-Seal 7-Roller BearingTaper Code No. Code No. Code No. Code No. Code No. Code No.2 310-205 310-210 310-215 310-220 310-225 310-2303 310-305 310-310 310-315 310-320 310-325 310-3304 310-405 310-410 310-415 310-420 310-425 310-4305 310-505 310-510 310-515 310-520 310-525 310-5306 310-605 310-610 310-615 310-620 310-625 310-630

PARTS FOR HEAVY DUTY LIVE CENTERSMorse 8-Thrust Bearing 9-Ball Bearing 10-Set Screw 11-Slot Screw 12-RingTaper Code No. Code No. Code No. Code No. Code No.2 310-235 310-240 310-245 310-250 310-2553 310-335 310-340 310-345 310-350 310-3554 310-435 310-440 310-445 310-450 310-4555 310-535 310-540 310-545 310-550 310-5556 310-635 310-640 310-645 310-650 310-655

SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324

Features• The rotating spindle is extended rightthrough the tapered shank

• Two specially designed adjustableneedle-roller bearings carry all radialloads

• A heavy duty ball thrust bearing takesall axial thrust

• Complete protection of bearings form the ingress of coolant, dirt or swarf is provided bythe built-in oil-seal, which also prevents loss of lubricant

PARTS FOR HEAVY DUTY LIVE CENTERS

10 11

SKODA & STM HEAVY DUTY LIVE CENTERSCentre Maximum

Morse Point Body Body Body Weight of SKODA STMTaper Angle Dia. (in) Dia. (in) Length (in) Work Piece Code No. Code No.1 60° 5⁄8 1-3⁄8 4-3⁄8 200 lb 310-105 320-1052 60° 7⁄8 1-1⁄2 5 600 lb 310-110 320-1103 60° 1-1⁄8 1-7⁄8 6-1⁄4 900 lb 310-115 320-1154 60° 1-1⁄2 2-3⁄16 7-1⁄2 1800 lb 310-120 320-1205 60° 1-3⁄4 2-3⁄4 9-1⁄2 3000 lb 310-125 320-1256 60° 2-3⁄8 3-1⁄2 12-3⁄4 7500 lb 310-130 320-130

SKODA LIVE CENTERS

SKODA EXTRA HEAVY DUTY LIVE CENTERSMorse D d I L Load WeightTaper (in) (in) a (in) (in) (lb) (lb) Code No.4 3.14 1.58 60° 4.10 7.85 3300 5 310-9205 3.54 1.65 60° 5.60 9.48 5500 9 310-9256 4.92 2.16 60° 6.42 13.38 11000 27 310-9307 5.70 2.56 60° 7.80 15.25 17600 45 310-935

SKODA EXTRA HEAVY DUTY LIVE CENTERS - CSN 243325For clamping of heavy workpieces at lathes.• The rigid structure and seating of the turning part ischaracterized by long service life

• The model EXTRA is commonly used for work atgrinding machines

• Centres with the apex angle of 60° for reduction ofdeformations of the machine (tailstock, bed, headstock)from axial clamping forces

• The live centres are provided with shanks according toDIN 228 and ISO 296 (without clamping thread)

SPARE PARTS FOR EXTRA HEAVY DUTY LIVE CENTERS

SPARE PARTS FOR EXTRA HEAVYParts No. Description Code No.MT 4-02 90° Point 310-8024-03 60° Point 310-8034-04 Ring 310-8044-05 End Plug 310-8054-06 Sealing 310-8064-07 Roller Bearing 310-8074-08 Thrust Bearing 310-8084-09 Radial Bearing 310-8094-10 Lock Screw 310-8104-11 Packing Piece 310-8114-12 Packing Ring 310-8124-13 Packing Ring 310-813

MT 5-02 90° Point 310-8165-03 60° Point 310-8175-04 Ring 310-8185.05 End Plug 310-8195.06 Sealing 310-8205-07 Roller Bearing 310-8215-08 Thrust Bearing 310-8225-09 Radial Bearing 310-8235-10 Lock Screw 310-8245-11 Packing Piece 310-8255-12 Packing Ring 310-8265-13 Packing Ring 310-827

DUTY LIVE CENTERSParts No. Description Code No.MT 6-02 90° Point 310-8306-03 60° Point 310-8316-04 Ring 310-8326-05 End Plug 310-8336-06 Sealing 310-8346-07 Roller Bearing 310-8356-08 Thrust Bearing 310-8366-09 Radial Bearing 310-8376-10 Lock Screw 310-8386-11 Packing Piece 310-8396-12 Packing Ring 310-8406-13 Packing Ring 310-841

SKODA LIVE CENTERS

SKODA PRECISION CNC LIVE CENTERS - CSN 243327-II• The centres are intended for NC lathes. Their face partsare formed to allow easy access of the tool to the work-piece, which is an advantage withworkpieces of complex shapes

• A special ring is used to set the radial clearance of the cen-tre. It also prevents cutting lubricant fromleaking into the centre bearing space, and so extends theoperational life of the centre

• Spindle-like point extends into shank where it issupported by a needle bearing, increasing rigidity, reducingpoint deflection and dampening vibration

SPARE PARTS FOR CNC LIVE CENTERSParts No. Description Code No.MT 2-02 Point 310-8552-03 Set Ring 310-8562-04 Ring 310-8572-05 End Plug 310-8582-06 Packing Piece 310-8592-07 Needle Bearing 310-8602-08 Thrust Bearing 310-8612-09 Radial Bearing 310-8622-10 Countersink Screw 310-8632-11 Lock Screw 310-8642-12 Snap Ring 310-865

MT 3-02 Point 310-8693-03 Set Ring 310-8703-04 Ring 310-8713-05 End Plug 310-8723-06 Packing Piece 310-8733-07 Needle Bearing 310-8743-08 Thrust Bearing 310-8753-09 Radial Bearing 310-8763-10 Countersink Screw 310-8773-11 Lock Screw 310-8783-12 Snap Ring 310-879

Parts No. Description Code No.MT 4-02 Point 310-8824-03 Set Ring 310-8834-04 Ring 310-8844-05 End Plug 310-8854-06 Packing Piece 310-8864-07 Needle Bearing 310-8874-08 Thrust Bearing 310-8884-09 Radial Bearing 310-8894-10 Countersink Screw 310-8904-11 Lock Screw 310-8914-12 Snap Ring 310-892

MT 5-02 Point 310-8955-03 Set Ring 310-8965-04 Ring 310-8975-05 End Plug 310-8985-06 Packing Piece 310-8995-07 Needle Bearing 310-9005-08 Thrust Bearing 310-9015-09 Radial Bearing 310-9025-10 Countersink Screw 310-9035-11 Lock Screw 310-9045-12 Snap Ring 310-905

SPARE PARTS FOR CNC LIVE CENTERS

SKODA PRECISION CNC LIVE CENTERSMorse D d L l LoadTaper (in) (in) (in) (in) (lb) Code No.2 1.5 .695 5.25 2.65 1300 310-0103 1.85 .750 6.75 3.50 1550 310-0154 2.20 1.125 8.15 3.95 4840 310-0205 3.10 1.375 10.50 4.85 7750 310-025

11 10

SKODA EXTENDED POINTS LIVE CENTERS - CSN 243328• Designed to keep dust, chips and coolant from cominginside the bearings

• Hardened and ground to 61-65 Rockwell• Concentricity within .0002"

SKODA HEAVY DUTY BULL NOSE LIVE CENTERS - CSN 243319Designed to hold pipe and hollow work. Pipe head can be used as anall-round centre for light work. Two matched angular contact bearingspreloaded at the factory. This achieves good thrust and radial capaci-ties. Bearings are protected by a combination steel shield and neo-prene seal.• Accuracy: ±0.0001"

SKODA EXTENDED POINTS LIVE CENTERSD d L l Load Weight Point

MT (in) (in) (in) (kg) (lb) (lb) Angle Code No. Price $2 1.417 .866 5.059 2.560 594 .79 60° 310-160 101.503 1.850 1.181 6.575 3.386 704 1.85 60° 310-165 121.104 2.165 1.378 8.169 4.094 2200 3.19 60° 310-170 151.705 2.736 1.772 10.197 5.078 3960 7.04 60° 310-175 210.356 3.504 2.362 13.425 6.319 12600 17.05 60° 310-180 370.35

SKODA HEAVY DUTY BULL NOSE LIVE CENTERSD d L l Load Weight

MT a (in) (in) (in) (kg) (lb) (lb) Code No. Price $3 60° 3.150 1.378 6.380 3.189 880 4.62 310-140 403.704 60° 4.527 1.732 7.637 3.622 2860 9.68 310-145 650.955 60° 5.314 1.811 9.449 4.331 4400 17.60 310-150 877.006 60° 6.693 2.520 12.125 4.961 8800 51.70 310-155 2030.25

SKODA LIVE CENTERS

SKODA LIVE CENTERS

SKODA LIVE CENTER SETSMorse A B-G A B C D E F GTaper d l L L D D1 D D1 D D1 D D1 D2 D D1 D2 D D1 D Code No.3 .590 .984 1.968 1.771 .787 .019 1.417 .236 2.480 1.299 1.417 1.102 .472 1.771 1.496 .866 .787 .098 .984 310-7054 .784 1.181 2.362 2.086 .984 .019 1.771 .393 2.755 1.378 1.771 1.456 .669 2.480 2.086 1.181 .984 .196 1.259 310-7105 .984 1.496 2.874 2.559 1.259 .039 2.204 .551 3.149 1.496 2.204 1.732 .787 2.775 2.362 1.417 1.259 .196 1.771 310-7156 1.181 1.811 3.543 3.149 1.417 .039 2.755 .708 3.937 1.968 2.755 2.283 .950 3.937 3.464 2.126 1.417 .315 2.204 310-720

Morse Part A Part B Part C Part D Part E Part F Part GTaper Code No. Code No. Code No. Code No. Code No. Code No. Code No.3 310-724 310-726 310-728 310-730 310-732 310-734 310-7364 310-744 310-746 310-748 310-750 310-752 310-754 310-7565 310-764 310-766 310-768 310-770 310-772 310-774 310-7766 310-784 310-786 310-788 310-790 310-792 310-794 310-796

ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETSMorse Live Centre Only Wooden Case Drift KeyTaper Code No. Code No. Code3 310-722 310-738 310-7404 310-742 310-758 310-7605 310-762 310-778 310-7806 310-782 310-798 310-800

SKODA LIVE CENTER SETS - CSN 243326

Features• The rotating spindle is extended right through the tapered shank• Two specially designed adjustable needle-roller bearings carryall radial loads

• A heavy duty ball thrust bearing takes all axial thrust• Complete protection of bearings form the ingress of coolant, dirtor swarf is provided by the built-in oil-seal, which also preventsloss of lubricant

ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETS

BORING &FACING HEADS

9

NAREX BORING AND FACING HEADS

UNIVERSAL BORING AND FACING MASTERHEAD

Solve ALL Your Boring and Facing Problems• All models available in metric

STANDARD EQUIPMENT SUPPLIED WITH THE MASTER HEAD IN CASEBoring bars 3⁄8 2 pcs. 1 x 4 1 x 4 1-1⁄4 x 6 1-1⁄4 x 6Boring bars 5⁄8 2 pcs. 1 x 6 1 x 6 1-1⁄4 x 9-3⁄4 1-1⁄4 x 9-3⁄4Boring bar holders *1 x 5-1⁄2 *1 x 5-1⁄2 *1-1⁄4 x 6-5⁄16 *1-1⁄4 x 6-5⁄16

*2 pcs. *2 pcs. *2 pcs. *2 pcs.Extension holder 5⁄8 x 3-7⁄8 1 x 6-7⁄8 1 x 6-5⁄8 1-1⁄4 x 11-13⁄16 1-1⁄4 x 11-13⁄16Complete set of reinforcing rings 5⁄8 1 1 1-1⁄4 1-1⁄4Carbide round tool bits *5⁄8 *1 *1 *1-1⁄4 *1-1⁄4

*4 pcs. *4 pcs. *4 pcs. *4 pcs.HSS square tool bits *5⁄16 x 1-3⁄16 *5⁄16 x 1-3⁄16 *3⁄8 x 1-13⁄32 *3⁄8 x 1-13⁄32

*4 pcs. *4 pcs. *4 pcs. *4 pcs.Reducing sleeve 5⁄8 x 3⁄8 1 x 3⁄4 1 x 3⁄4 1-1⁄4 x 3⁄4 1-1⁄4 x 3⁄4Reducing sleeve 1 x 5⁄8 1 x 5⁄8 1-1⁄4 x 5⁄8 1-1⁄4 x 5⁄8

UNIVERSAL BORING AND FACING MASTERHEADModel No. VHU-36 VHU-56 VHU-80 VHU-125 VHU-160Code No. 300-007 300-055 300-105 300-155 300-205Metric Set Code No. 300-008 300-056 300-106 300-156 300-206QUICK RETURN MOVEMENT QUICK RETURN ADJUSTMENT THROUGH SLIDE SETTING SCREWOperating Accuracy ± .0002 ± .0002 ± .0002 ± .0002 ± .0002Boring and facing range from 0 up to 9 13 16 24 31Max. adjustability of slide 1.375 2.125 3.125 4.875 5.750Max. dia. of slide 2.750 4.250 6.250 9.750 11.500

.002 .002 .002 .002Various automatic slide – .0016 .004 .004 .004 .004feeds per revolution .0032 .006 .006 .006 .006

.0048 .008 .008 .008 .0081 graduation of sensitive .0005 .0005 .0005 .0005 .0005adjustments ins. on dia.1 Revolution of sensitive adjustment .016 .016 .016 .016 .016Quick return per revolution .030 .120 .120 .160 .160Diameter of tool post holes in slide 5⁄8 1 1 1-1⁄4 1-1⁄4Height of Head without shank 3.125 4.350 4.350 5.000 5.000Width of Head 2.875 4.500 5.500 7.000 8.725Weight of head without shank 4 lb 12 lb 16 lb 26.6 lb 31 lbAccessories 300-003 300-053 300-104 300-153 300-202Head only 300-004 300-054 300-103 300-154 300-203Case only 300-006 300-052 300-102 300-204 300-204Shank M.T. 2 300-010Shank M.T. 3 300-015Shank M.T. 4 300-020 300-060 300-110Shank M.T. 5 300-115 300-115 300-115 300-115Shank M.T. 6 300-165 300-165 300-165Shank ISA - 30 300-025Shank ISA - 40 300-030 300-070 300-070Shank ISA - 50 300-075 300-075 300-075 300-075Shank R - 8 300-035 300-080Shank Straight 3/4 300-039Shank Straight 1 300-040Shank Cat - 40 300-033 300-073Shank Cat - 50 300-076 300-076 300-076 300-076Shank BT - 40 300-034 300-074Shank BT - 50 300-077 300-077 300-077 300-077Tang M.T. 2 300-245Tang M.T. 3 300-250Tang M.T. 4 300-255 300-255 300-255Tang M.T. 5 300-260 300-260 300-260 300-260Tang M.T. 6 300-265 300-265 300-265

NAREX BORING AND FACING HEADS

Principal Component Part of Head Vhu-361. Braking ring2. Engaging ring3. Control ring4. Scale5. Slide6. Setting screw7. Holes for tools8. Clamping screws9. Screw for locking slide

in position10. Stop dog11. Stop dog pin12. Knob for rapid traverse

control (only in Vhu 1-1/4)13. Lubricator14. Screw for clutch adjustment15. Clutch16. Retaining rod

Basic machining operations shown for theVhu type universal boring heads:1. Boring of holes2. Spotfacing of small end

large-diameter end faces3. Recessing inside holes4. Recessing on surfaces

of parts5. Free recessing

6. External diametermachining

7. Boring of tapered holes8. External machining of taper9. Facing of rear end faces10. Thread cutting

NAREX BORING AND FACING HEADS

VHU 36

NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160

NAREX BORING AND FACING HEADS

NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 CONTINUED

NAREX BORING AND FACING HEADS

NAREX BORING AND FACING HEAD PARTSNew Part Description pcs Part No. pcs Part No. pcs Part No

Sowa Code Sowa Code Sowa CodeVHU Model No. VHU 36 (1-3/8) VHU 56 (2-1/8) VHU 125 (4-7/8)

New I.D. No. VHU 80 (3-1/8) VHU 160 (6-1/4)1 Cap Screw 4 #70-300-770 4 #88-300-588 4 #88-300-5882 Ring 1 #2-300-702 1 #3-300-503 1 #3-300-6033 Pin 1 #36-300-736 1 #51-300-551 1 #55-300-6554 Flange (Hold-Ring) 1 #71-300-771 1 #80-300-480(vhu-56) 1 #91-300-691

1 #91-300-591(vhu-80)5 Clutch Pin (Safety pin) 1 #26-300-726 1 #5-300-505 1 #5-300-6056 Hold Ring (Brake ring) 1 #3-300-703 1 #4-300-504 1 #4-300-6047 Set Ring 1 #4-300-704 1 #6-300-506 1 #6-300-6068 Pin 2 #36-300-736 2 #54-300-554 2 #58-300-6589 Ring (Control Ring) 1 #5-300-705 1 #7-300-507 1 #7-300-60710 Spring 2 #20-300-720 1 #40-300-540 1 #40-300-64011 Spring 6 #7-300-707 8 #11-300-511 8 #11-300-61112 Pin 6 #8-300-708 8 #9-300-509 8 #9-300-60913 Cap Screw 1 #64-300-764 1 #46-300-546 1 #50-300-65014 Cover (Lid) 1 #16-300-716 1 #18-300-518 1 #18-300-61815 Washer 1 #65-300-765 1 #41-300-541 1 #46-300-64616 Star Gear (Ratchet Wheel) 1 #15-300-715 1 #20-300-520 1 #20-300-62017 Washer (Ring) 1 #18-300-718 1 #22-300-522 1 #22-300-62218 Slideguide 1 #10-300-710 1 #13-300-413(vhu-56) 1 #13-300-613

1 #13-300-513(vhu-80)19 Screw - - 1 #77-300-577 1 #53-300-65320 Spring - - 1 #36-300-536 1 #70-300-67021 Brake - - 1 #21-300-521 1 #21-300-62122 Washer (Ring) 2 #22-300-722 2 #25-300-525 2 #25-300-62523 Pin 2 #69-300-769 2 #51-300-551 2 #55-300-65524 Stop Screw 2 #39-300-739 4 #49-300-549 4 #44-300-64425 Stop (Dog) - L.H. Stop 2 #28-300-728 1 #15-300-515 1 #15-300-61526 Stop Nut (Insert) 2 #42-300-742 2 #14-300-514 2 #14-300-61427 Slide 1 #13-300-713 1 #2-300-402(vhu-56) 1 #2-300-602

1 #2-300-502(vhu-80) 1 #80-300-68028 Pin (Bar) 1 #47-300-747 1 #24-300-524 1 #24-300-62429 Spring 1 #46-300-746 1 #70-300-570 1 #70-300-67030 Set Screw 1 #74-300-774 1 #8-300-508 1 #71-300-67131 Set Screw 3 #35-300-735 3 #68-300-568 3 #74-300-674

5 #74-300-67432 Set Screw 3 #41-300-741 3 #67-300-567 3 #73-300-673

5 #73-300-67333 Ball 3 #75-300-775 3 #58-300-558 3 #61-300-66134 Worm Rod (Screw) 1 #12-300-712 1 #23-300-423(vhu-56) 1 #23-300-623

1 #23-300-523(vhu-80) 1 #92-300-69235 Washer (Distance Ring) - Spacer 1 #27-300-727 1 #37-300-537 1 #37-300-63736 Pin 2 #77-300-777 2 #53-300-553 2 #57-300-65737 End Stop (Back Bearing) 1 #17-300-717 1 #38-300-538 1 #38-300-63838 End Screw 2 #76-300-776 2 #43-300-543 2 #48-300-64839 Stop (Dog) - R.H. Stop - - 1 #16-300-516 1 #16-300-61640 Gear Ring 2 #21-300-721 2 #26-300-526 2 #26-300-62641 Spindle (Worm) 1 #9-300-709 1 #12-300-512 1 #12-300-61242 Worm Gear (Worm Wheel) 1 #23-300-723 1 #17-300-417 1 #17-300-61743 Pin (Parallel Key) 1 #66-300-766 1 #19-300-519 1 #19-300-61944 Head Nut 3 #49-300-749 3 #72-300-572 4 #47-300-64745 Head Screw 3 #48-300-748 3 #45-300-545 4 #49-300-64947 Ring (Control Ring) 1 #6-300-706 1 #10-300-510 1 #10-300-610

NAREX BORING AND FACING HEADS

NAREX BORING AND FACING HEAD PARTSNew Part Description pcs Part No. pcs Part No. pcs Part No

Sowa Code Sowa Code Sowa CodeVHU Model No. VHU 36 (1-3/8) VHU 56 (2-1/8) VHU 125 (4-7/8)

New I.D. No VHU 80 (3-1/8) VHU 160 (6-1/4)48 Pin 2 #38-300-738 2 #56-300-556 2 #59-300-65949 Ball 2 #44-300-744 2 #58-300-558 2 #61-300-66150 Stop Rod (Bar) 1 #34-300-734 1 #35-300-535 1 #35-300-63551 Knob (Ball) - - - 1 #59-300-559 1 #62-300-66252 Screw 1 #63-300-763 1 #47-300-547 1 #51-300-65153 Spring 1 #24-300-724 1 #29-300-529 1 #29-300-62954 Pin Point 1 #25-300-725 1 #30-300-530 1 #30-300-63055 Ball 1 #51-300-751 - - - - - -56 Cap Screw 1 #40-300-740 - - - - - -57 Pin 1 #32-300-732 - - - - - -58 Ball (Brake) 1 #19-300-719 - - - - - -59 Pin 1 #59-300-779 - - - - - -60 Cap Screw 6 #70-300-770 6 #81-300-481(vhu-56) 6 #89-300-689

6 #89-300-589(vhu-80)61 Pin 1 #78-300-778 - - - - - -62 Plug 2 #45-300-780 2 #57-300-592 2 #60-300-69463 Ring Clip (Circlip) 1 #50-300-750 1 #60-300-560 1 #63-300-66364 Parallel key - - - 4 #87-300-587 4 #87-300-68765 Screw - - - 4 #90-300-590 4 #90-300-69066 Pin 1 #14-300-781 1 #55-300-593 1 #42-300-69567 Set Screw 2 #41-300-741 2 #67-300-567 2 #73-300-67368 Screw - - - 2 #48-300-548 2 #52-300-65269 Pin 1 #37-300-782 1 #69-300-594 1 #45-300-696101 Boring tool 5x3/8"x60 1 #54-300-754 - - - - - -102 Boring tool 13x5/8"x90 1 #52-300-752 - - - - - -103 Internal corner tool 5x3/8"x60 1 #55-300-755 - - - - - -104 Internal corner tool 13x5/8"x90 1 #53-300-753 - - - - - -105 Right hand tool S20 1 #59-300-759 1 #65-300-565 1 #68-300-668106 Right hand tool H10 1 #58-300-758 1 #75-300-575 1 #77-300-677107 Left hand tool S20 1 #57-300-757 1 #66-300-566 1 #66-300-666108 Left hand tool H10 1 #56-300-756 1 #76-300-576 1 #76-300-676109 Tool HSS - - - 2 #64-300-564 2 #67-300-667110 Tool S20 - - - 2 #63-300-563 2 #69-300-669111 Extension (Boring bar) - - - 1 #28-300-528 1 #28-300-628112 Extension (Boring bar) - - - 1 #27-300-527 1 #27-300-627113 Toolholder (Holder with screw) - - - 2 L=160 #34-300-534 2 #34-300-634

2 L=185 #34-300-534 - - -114 Toolholder (Holder with screw) 1 #31-300-731 1 L=195 #33-300-533 1 L=350 #33-300-633

1 L=220 #33-300-533 1 L=385 #33-300-633115Collar Set (Set of spacing tubes) 1 #30-300-730 1 #32-300-532 1 #32-300-632116 Reducer (Reduction sleeve) 1 #33-300-733 1 #42-300-542 1 #41-300-641117 Reducer (Reduction sleeve) - - 1 #44-300-544 1 #8-300-608118Allen (Hexagon) Wrench "NAREX" 1 #73-300-773 - - -119 Allen (Hexagon) Wrench 4 1 #60-300-760 1 #61-300-561 1 #64-300-664120 Hexagon wrench 6 - - 1 #62-300-562 1 #65-300-665121 Washer 1 #29-300-729 1 #31-300-531 1 #31-300-631122 Hex Screw 1 #43-300-743 1 #50-300-550 1 #54-300-65427P Slide-set

consists of parts:27+36+37+38+28+29+30+31+3234P Screw-set

consists of parts:34+42+40+22+35+23

42P Worm wheel-setconsists of: 42+40+22+23

ALSO FROM SOWA

• European Engineering and Design• Supplied with nationally traceable calibration certificates• 12 + 12 Care Warranty Program

For more details visit us at:

wwwwww..aassiimmeettoo..ccoomm

CCaallll ttooddaayy ffoorr yyoouurr ccaattaalloogg

Value +

CALL FOR YOUR CATALOG TODAY

• European Engineering and Design• Supplied with nationally traceable calibration certificates• 12 + 12 Care Warranty Program

BALANCED ROTARY TOOLING40 TAPER TO 20,000 RPM50 TAPER TO 15,000 RPM

MODULAR ANDMACHINE VISES

MEETING TODAYSDEMAND OF INCREASEDSPEED ANDSPINDLE LIFE

CALL TODAY FOR YOUR GS CATALOG TODAY

Distributed By:

ISO 9001 USAC08 Printed in Canada

TOOL & MACHINE CO. LTD.500 Manitou DriveKitchener, OntarioN2G 4B6

Toll Free: 1-800-265-8221Phone: (519) 748-5750Fax: (519) 748-9304Email: sales@sowatool.comweb: www.sowatool.com