ACCESS · PDF fileStainless Steel Prime Coated Steel ... The Acudor FW-5050-UP is a fire...

AC

UD

OR

Ac

ce

ss

D

oo

rs

ACCESS DOORSfrom ACUDORACCESS DOORSfrom ACUDOR

O DOO S

OOF HATCHES

FLOOR DOORS

ROOF HATCHES

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor UF-5000 is an innovative universal flush access door for walls and ceilings. It is designed for installation in drywall, plaster, masonry, tile or any flush surface.The door panel features rounded safety corners which provide an architecturally pleasing appearance. The one piece trim flange will not rack, sag or distort.The unique continuous concealed hinge will not bind or corrode, allowing the door to operate freely time and time again. For easy installation, the mounting frame is 1-1/4” deep,giving maximum clearance behind the door frame.

UF-5000Stainless Steel

UF-5000Prime Coated Steel

SPECIFICATIONSMaterial: 16" x 16" and smaller: 16 gage door, 18 gage mounting frame.

Over 16" x 16": 14 gage door, 16 gage mounting frame.Door: Flush to frame — rounded safety corners.Frame: One piece outer flange welded to mounting frame.Hinge: Continuous, concealed.Latch: Stainless steel screwdriver operated cam latch. Also available: cylinder lock & key, allen head cam latch, spanner head cam latch.Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked enamel.

Stainless Steel: Type 304 — #4 satin polish.

UNIVERSAL FLUSH ACCESS DOOR

STANDARD SIZES (special sizes available upon request)

Masonry

Continuous concealed hinge

W

1”

1-1/4”

16GA Frame

14GA DoorDrywall Screw to framethru .250 x .500 slots

UF-5000Wall or ceiling opening = W + 3/8”

NOMINAL DOOR SIZE W & H CEILING OR WALL OPENING NO. OF WEIGHT PER DOOR UF-5000INCHES mm INCHES mm LATCHES lbs. kg.

6 X 6 152 X 152 6-3/8 X 6-3/8 161 X 161 1 2.0 0.98 X 8 203 X 203 8-3/8 X 8-3/8 213 X 213 1 2.7 1.28 X 12 203 X 305 8-3/8 X 12-3/8 213 X 314 1 3.6 1.6

10 X 10 254 X 254 10-3/8 X 10-3/8 264 X 264 1 3.6 1.612 X 12 305 X 305 12-3/8 X 12-3/8 314 X 314 1 4.7 2.112 X 16 305 X 406 12-3/8 X 16-3/8 314 X 416 2 6 2.712 X 18 305 X 457 12-3/8 X 18-3/8 314 X 467 2 7.0 3.112 X 24 305 X 610 12-3/8 X 24-3/8 314 X 619 2 8.5 3.914 X 14 355 X 355 14-3/8 X 14-3/8 365 X 365 1 6.2 2.716 X 16 406 X 406 16-3/8 X 16-3/8 416 X 416 2 7.6 3.416 X 24 406 X 610 16-3/8 X 24-3/8 416 X 619 2 12.5 5.718 X 18 457 X 457 18-3/8 X 18-3/8 467 X 467 2 11.2 5.118 X 24 457 X 810 18-3/8 X 24-3/8 467 X 619 2 15 6.722 X 22 560 X 560 22-3/8 X 22-3/8 568 X 568 4 16.3 7.222 X 30 560 X 762 22-3/8 X 30-3/8 568 X 772 5 21 9.522 X 36 560 X 914 22-3/8 X 36-3/8 568 X 924 5 26 12.024 X 24 610 X 610 24-3/8 X 24-3/8 619 X 619 4 18 8.224 X 30 610 X 762 24-3/8 X 30-3/8 619 X 772 5 22.5 10.224 X 36 610 X 914 24-3/8 X 36-3/8 619 X 924 5 26.6 12.124 X 48 610 X 1220 24-3/8 X 48-3/8 619 X 1229 5 38 18.130 X 30 762 X 762 30-3/8 X 30-3/8 772 X 772 5 27.5 12.536 X 36 914 X 914 36-3/8 X 36-3/8 924 X 924 5 39 17.7

jenniferwyse

New Stamp

jenniferwyse

accessdoor.pdf

“Universal Access”

DESCRIPTIONThe Acudor FW-5050 is a fire rated access door approved for use in walls and ceilings. For walls, this door has a Underwriters Laboratories (UL and ULC), 1-1/2 hour "B" label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor.For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24" x 36").For drywall applications, this door is available (FW-5050-DW) with a galvanized steel drywall taping bead flange.NOW AVAILABLE! - An UPSWING Fire Rated Access Door!The Acudor FW-5050-UP is a fire rated inward opening access door approved for use in ceilings.This door has been approved by Warnock Hersey International for 3 hours (Available in 3 sizes: 24"x 24", 22"x 36" & 24"x 36").Standard Features:• INSULATED DOOR PANEL • CONCEALED HINGE • SELF-CLOSING• SELF-LATCHING • INSIDE LATCH RELEASE

SPECIFICATIONSMaterial: Steel or Stainless Steel: 20 gage door,16 gage mounting frame.Door: Filled with 2" thick fire rated insulation.Frame: Flange to be 1" wide, mounting frame to have anchor straps.Hinge: ConcealedLatch: Universal self-latching bolt, operated by either a knurled knob or

flush key. When master keying is required, doors can be prepared for mortise cylinder locks.

Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked enamel. Stainless Steel: #4 satin polish.


DESCRIPTIONThe Acudor FB-5060 is approved by Underwriters Laboratories (UL) for 1-1/2 hours "B" label in walls and ULC for 2 hours "B" label in walls. Designed to maintain continuity in a 2 hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.For drywall applications, this door is available (FB-5060-DW) with a galvanized steel drywall taping bead flange.Standard Features:• CONCEALED HINGE • SELF-CLOSING • SELF-LATCHING • INSIDE LATCH RELEASE

FW-5050Walls and Ceilings

FB-5060Walls

FIRE RATED ACCESS DOORS

FB-5060

FW-5050

Stiffener used on doors30” & larger

MasonryMasonry

Interior latch release Internal latch release

Concealed hingeConcealedhinge

2” Fiberglassinsulation

Universal latch operated by knob or key Universal latch operated by knob or key

Wall opening = W + 3/8”

W

2-9/16”2-9/16”

1”1”

Metalstud Metal

stud

Fire ratedDrywall

Fire ratedDrywall

Screw to framethru 1/4”embossed holes

Screw to framethru 1/4”embossed holes

Spring closerSpring closer

20GADoor

16GAFrame

16GA frame & door

SPECIFICATIONSMaterial: Steel or Stainless Steel: 16 gage door, 16 gage

mounting frame.Door: Flush to frame with reinforced edges.Frame: Flange to be 1" wide, mounting frame to have anchor straps.Hinge: ConcealedFire Rating: UL — 1-1/2 hour "B" label. ULC — 2 hour "B" label. (optional)Latch: Universal self-latching bolt, operated by either a knurled knob

or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.

Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked enamel.Stainless Steel: #4 satin polish.

NOMINAL DOOR SIZE W & H WALL OR CEILING OPENING NO. OF WEIGHT PER DOOR FB-5060 WEIGHT PER DOOR FW-5050INCHES mm INCHES mm LATCHES lbs. kg. lbs. kg.

8 X 8 203 X 203 8-3/8 X 8-3/8 213 X 213 1 5.5 2.5 8 3.610 X 10 254 X 254 10-3/8 X 10-3/8 264 X 264 1 6.7 2.9 9 4.112 X 12 305 X 305 12-3/8 X 12-3/8 365 X 365 1 8.3 3.8 10 4.814 X 14 355 X 355 14-3/8 X 14-3/8 365 X 365 1 9.5 4.3 12 5.416 X 16 406 X 406 16-3/8 X 16-3/8 416 X 416 1 11.5 5.2 15 6.818 X 18 457 X 457 18-3/8 X 18-3/8 467 X 467 1 14.3 6.5 20 9.122 X 30 560 X 762 22-3/8 X 30-3/8 568 X 772 1 32.5 14.5 32 14.522 X 36 560 X 914 22-3/8 X 36-3/8 568 X 924 2 28 12.7 35 15.924 X 24 610 X 610 24-3/8 X 24-3/8 619 X 619 1 20.3 9.2 28 12.724 X 36 610 X 914 24-3/8 X 36-3/8 619 X 924 2 28.5 12.9 38 18.124 X 48 610 X 1220 24-3/8 X 48-3/8 619 X 1229 2 34 10.6 48 21.330 X 30 762 X 762 30-3/8 X 30-3/8 772 X 772 2 28.5 12.9 38 18.136 X 36 914 X 914 36-3/8 X 36-3/8 924 X 924 2 38 17.2 54 24.536 X 48 914 X 1220 36-3/8 X 48-3/8 924 X 1229 2 47.5 21.5 76 34.5

Wall or ceiling opening = W + 3/8”

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor DW-5040 is designed specifically for installation in drywall walls and ceilings afterthe drywall has been installed.The door flange is perforated as a taping bead, with pre-punched holes. Drywall compound isapplied over the bead at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and st/stl screwdriver operated cam latches allow the door panel, which is formed with flanges on foursides, to operate freely with no binding, sagging, or distortion.

DESCRIPTIONThe Acudor PS-5030 is designed for installation in plaster walls and ceilings, before the plaster is applied. An expansion casing bead with 3” wide galvanized lath, included as part of theframe, provides a clean, tight finish between the frame and plaster and also adds reinforcement.The door panel is finished flush with the plaster. Our unique concealed continuous hinge andscrewdriver operated cam latches allow the door panel to operate freely with no binding,sagging or distortion.

DW-5040 PS-5030

SPECIFICATIONSMaterial: Steel or Stainless Steel: 14 gage door, 14 gage mounting frameDoor: Flush to edge of frameFrame: Expansion casing bead with 3" wide galvanized lath, recessed 3/4"

to receive plasterHinge: Continuous, concealedLatch: Stainless steel screwdriver operated cam latch. Also available: cylinder lock &

key, allen head cam latch, spanner head cam latch.Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked

enamel. Stainless Steel: #4 satin polish.

SPECIFICATIONSMaterial: 20 gage galvanized formed door panel, flanged on four sides;

26 gage galvanized frame, with multiple bends for added strengthDoor: Formed door panel, flanged on four sidesFrame: Multiple bends for added strength. Integral perforated taping bead adds

extra rigidity Hinge: ConcealedLatch: Stainless steel screwdriver operated cam latch. Also available: cylinder lock &

key; allen head cam latch; spanner head cam latchFinish: 5 stage iron phosphate preparation with prime coat of white baked

enamel.. Frame to be mill finish

FLUSH ACCESS DOORS



1/4” Dia. holes

Continuousconcealed hinge 14GA Door

14GA Frame

W

2”

3/4”

Metalstud

Metalstud

Plaster Expansion casing bead with3” wide galvanizedlath; recessed3/4” to receiveplaster

PS-5030

NOMINAL DOOR SIZE W & H WALL OR CEILING OPENING NO. OF WEIGHT PER DOOR DW-5040 or PS-5030INCHES mm INCHES mm LATCHES lbs. kg.6 X 6 152 X 152 6-3/8 X 6-3/8 161 X 161 1 1.5 .688 X 8 203 X 203 8-3/8 X 8-3/8 213 X 213 1 2.0 .91

10 X 10 254 X 254 10-3/8 X 10-3/8 264 X 264 1 2.5 1.1412 X 12 305 X 305 12-3/8 X 12-3/8 314 X 314 1 3.0 1.3614 X 14 355 X 355 14-3/8 X 14-3/8 365 X 365 1 5.0 2.2716 X 16 406 X 406 16-3/8 X 16-3/8 416 X 416 2 5.5 2.518 X 18 457 X 457 18-3/8 X 18-3/8 467 X 467 2 6.0 2.7322 X 22 560 X 560 22-3/8 X 22-3/8 568 X 568 4 8.0 3.6424 X 24 610 X 610 24-3/8 X 24-3/8 619 X 619 4 9.0 4.0924 X 36 610 X 914 24-3/8 X 36-3/8 619 X 924 5 13.0 5.9130 X 30 762 X 762 30-3/8 X 30-3/8 772 X 772 5 15.0 6.8236 X 36 914 X 914 36-3/8 X 36-3/8 924 X 924 5 21.0 9.55

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor SF-2000 is an innovative surface mounted accessdoor for all types of walls and ceilings. The door panel featuresrounded safety corners providing an architecturally pleasingappearance. An exposed continuous piano hinge allows thedoor panel to open to 175 degrees. The SF-2000 is the idealchoice for all applications. The mounting holes in each corner ofthe frame allow for easy installation. Since there is no frame toextend into the wall or ceiling, the SF-2000 is perfect foraccess to odd size openings.

DESCRIPTIONThe Acudor PA-3000 Plastic Access Door is designed to provideeasy access to walls and ceilings. The high impact styrene plastic with U.V. stabilizers will not fade or corrode. The door ishinged with a removable feature (except 14”x29” which is nothinged). The white finish, with textured exposed surfaces, can be left as is or painted to match the surrounding areas. This dooris easy to install by applying caulking adhesive to the back of theframe and pressing into place.

SF-2000Surface Mounted

PA-3000Plastic Access Door

SPECIFICATIONSMaterial: 1/8" high impact styrene plastic with

U.V. stabilizers.Door: Flush to frame — rounded safety corners.Frame: One piece outside flange with 3/4"

deep mounting frame.Latch: Snap latches allow door to fit tightly

within frame.Finish: White, with textured exposed surfaces.

SPECIFICATIONSMaterial: Steel or Stainless Steel: 16 gage.Door: Flush to frame — rounded safety corners.Frame: One piece outer flange.Hinge: Exposed continuous piano hinge.Latch: Stainless steel screwdriver operated cam latch.

Also available: cylinder lock & key, allen head cam latch, spanner head cam latch.


SPECIALTY ACCESS DOORS

STANDARD SIZES SF-2000 (special sizes available upon request)

STANDARD SIZES PA-3000 (special sizes available upon request)

Masonry

Surface mount frame to wa l/ceiling

W

W + 1 1/8”

Metalstud

Drywall

Continuous piano hinge

16GA frame & door

SF-2000

Wall or ceiling opening = W 1/4”

1/8” high impact styrene plas ic

W

Metalstud

Metalstud

DrywallSnap latch

PA-3000


3/4”

Drywa l

NOMINAL WALL WEIGHTDOOR SIZE OR PER

W & H CEILING OPENING DOORINCHES mm INCHES mm lbs. kg.

4 X 6 101 X 152 4-3/8 X 6-3/8 110 X 161 1/2 1/46 X 9 152 X 228 6-3/8 X 9-3/8 161 X 238 1/2 1/48 X 8 203 X 203 8-3/8 X 8-3/8 213 X 213 1/2 1/4

14 X 14 356 X 356 14-1/8 X 14-1/8 359 X 359 1-1/2 2/314 X 29 358 X 735 14-3/8 X 29-3/8 366 X 746 4 1-7/822 X 22 560 X 560 22-3/8 X 22-3/8 568 X 568 4 1-7/8

NOMINAL WALL WEIGHTDOOR SIZE OR NO. PER

W & H CEILING OPENING OF DOORINCHES mm INCHES mm LATCHES lbs. kg.

8 X 8 203 X 203 7-3/4 X 7-3/4 196 X 196 1 2 0.912 X 12 305 X 305 11-3/4 X 11-3/4 298 X 298 1 4 1.816 X 16 406 X 406 15-3/4 X 15-3/4 400 X 400 2 6 2.724 X 24 610 X 610 23-3/4 X 23-3/4 603 X 603 4 14 6.4

DESCRIPTIONThe Acudor AS-9000 is a fully gasketed access door,designed for use in walls and ceilings. The formed doorpanel, with a concealed hinge, and closed cell neoprenegasket, provides for a tight fit. Most popular in stainlesssteel, with a #4 satin polish, this door is also available inprime coated steel. This door is commonly used in cleanrooms, laboratories, operating rooms, etc.

Please note that although being fully gasketed, the AS-9000has not been tested for air penetration.

SPECIFICATIONSMaterial: Stainless Steel or Steel: 16 gage door, 16 gage

mounting frame.Door: Flush to frame with reinforced edges.Frame: Flange to be 1” wide.Hinge: Concealed.Gasket: 1/8” x 3/8” closed cell neoprene gasket.Latch: Stainless steel screwdriver operated

cam latch. Also available: cylinder lock & key,allen head cam latch, spanner head cam latch.

Finish: Stainless steel: #4 satin polish.Steel: 5 stage iron phosphate with prime coat of white baked enamel.

STANDARD SIZES AS-9000 (special sizes available upon request)

AS-9000Fully Gasketed Access Door

12 X 12 305 X 305 12-3/8 X 12-3/8 314 X 314 1 6 2.718 X 18 457 X 457 18-3/8 X 18-3/8 467 X 467 2 11.5 5.124 X 24 610 X 610 24-3/8 X 24-3/8 619 X 619 4 19 8.424 X 36 610 X 914 24-3/8 X 36-3/8 619 X 924 5 28 12.4

AS-9000

Wa l or ce ling opening = W + 3/8”

Metalstud

Metalstud

W

1”Concealedhinge

Screw to Frame through 250 x 500 slots

1/8” x 3/8” Foam Gasket all around

16 GA Frame

16 GA Door DrywallDrywa l

2”

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor DW-5015 recessed access door is designed forflush installation in drywall surfaces when it is required to conceal the door panel, which is recessed 1" to receive drywall.The flange of the door is a textured galvanized steel tapingbead with pre-punched holes. Drywall compound is appliedover the beading at the same time the drywall joints are finished.For use in acoustical ceilings, the Acudor AT-5020 is identical to the DW-5015, with the galvanized steel tapingbead flange being omitted.

RECESSED ACCESS DOORS

DW-5015


mounting frameDoor: Recessed 1"Frame: Galvanized steel drywall taping bead on all sides

(DW-5015 only)Hinge: Concealed, pivoting rod type. (For wall applications,

a continuous exposed piano hinge is suggested.)Latch: Flush to surface, screwdriver operated cam latch

Also available: cylinder lock and key, allen head cam latch, spanner head cam latch

Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked enamel.

14GA Frame

Concealed hinge

W

Metalstud

MetalstudDrywall

Drywall

Screw to framethru 9/32” holes1”

2-1/2”

Galvanized steeldrywall tapingbead flange

16GA Door

DW-5015


NOMINAL DOOR SIZE WALL OR NO. WEIGHT PER DOOR BAUCO DOOR SIZESW X H CEILING OPENING OF AP-5010/DW-5015/AT-5020

INCHES mm INCHES mm LATCHES lbs. kg. Inch mm12 X 12 305 X 305 12-3/8 X 12-3/8 314 X 314 1 8.5 3.9 12.25”x12.25” 311x31118 X 18 457 X 457 18-3/8 X 18-3/8 467 X 467 2 15 6.8 18,25”x18.25” 463x46324 X 24 610 X 610 24-3/8 X 24-3/8 619 X 619 2 23 10.4 24.25”x24.25” 616x61624 X 36 610 X 914 24-3/8 X 36-3/8 619 X 924 4 30 13.8 24.25”x36.25” 616x920

DESCRIPTION

The BP58 BAUCO PLUS access door is designed to provideaccess in walls and ceilings, while maintaining an invisible,architecturally pleasing appearance. The door panel is suppliedwith one layer of 5/8” drywall (or 1/2”). The concealed hingeand removable door panel, along with the easy installation andfinishing process, make this access door the best drywallaccess door in the industry.

SPECIFICATIONSDoor: Aluminum extrusion with 5/8” dry-wall inserted

into door panel (1/2” also available)Frame: Recessed aluminum extrusion provides similar

edge to drywall bead against which wall or ceiling surface can be finished

Hinge: Unique concealed non corroding two point pin hinge. Hinge allows door panel to open to 120 degrees, and also allows for door panel to be removed

Latch: Screwdriver operated cam latch. Also available:tamper resistant torx head cam latch, cylinder lockand key, concealed touch latch

Finish: Mill Finish. Drywall is ready to be finished to matchsurrounding wall or ceiling surface.

AP-5010BP58 BAUCO PLUS

DESCRIPTIONThe Acudor AP-5010 recessed access door is designed for use inacoustical plaster walls and ceilings. The door is recessed 5/8"and is lined with self-furring lath. An expansion casing bead with3" wide galvanized lath, included as part of the frame, provides aclean, tight finish between the frame and plaster and also addsreinforcement.


mounting frameDoor: Recessed 5/8" and lined with self-furring

galvanized lath.Frame: Expansion casing bead with 3" wide galvanized

lath, recessed 3/4" to receive plasterHinge: Concealed, pivoting rod type. (For wall applications,

a continuous exposed piano hinge is suggested.)Latch: Flush to surface, screwdriver operated cam latch

Also available: cylinder lock and key, allen head cam latch, spanner head cam latch

Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked enamel

DW-5015 BAUCO PLUS

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor SD-6000 is a heavy duty access door designed for use in high security areas. Theangle frame construction and 10 gage plate door panel makes this access door ideal for prisons,correctional facilities, housing projects etc.Our standard security butt hinges are surface welded to the door and frame, allowing the doorpanel to operate freely. A detention type deadbolt lock with paracentric key is standard.

DESCRIPTIONThe Acudor MS-7000 is a medium duty access door. The 12 gage door and frame construc-

tion and tamperproof security cam latches make this access door ideal for use in medium secu-rity jails, prisons, psychiatric institutions, etc.

The door panel features rounded safety corners which provides an architecturally pleasingappearance. The one piece trim flange and continuous concealed hinge keep the door panel fromracking, sagging, or distorting.

SD-6000 MS-7000

SPECIFICATIONSMaterial: Steel or Stainless Steel: 12 gage door, 12 gage mounting

frame.Door: Flush to frame with rounded safety corners and reinforced

panel.Frame: One piece outer flange welded to mounting frame.Hinge: Continuous, concealed.Latch: Tamper resistant allen head cam latch with security pin.

Also available: spanner head cam latch, cylinder lock & key.When master keying is required, doors can be prepared for rim or mortise cylinder locks.

Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked enamel.Stainless Steel: Type 304 — #4 satin polish.

SPECIFICATIONSMaterial: Steel or Stainless Steel: 10 gage door, 2"x 2" x 3/16" angle frameDoor: 10 gage plate, flush to edge of frameFrame: Flange to be 2" wide, mounting frame to have anchor strapsHinge: Heavy duty butt hinges, welded to door and frame.Latch: Detention type deadbolt lock with paracentric key.

Also available: tamperproof security cam latches, cylinder lock and key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.


SECURITY ACCESS DOORS


2”x 2”x 3/16”Angle frame

4”x 4”x 1/8” Butt hingeDrywall

MasonryMasonry strap

Heavy dutydetention lock withparacentric key

W

2”

2”

Screw to framethru .250 x .500slots

Metalstud

10GA Door

SD-6000


12GA Frame

Tamper resistant allen head cam latch with security pinW

2”

1-1/2”

Screw to frame thru.250 x .500 slots

Masonry

Drywall

Metalstud

12GA Door


MS-7000


NOMINAL DOOR SIZE WALL OR CEILING OPENING WEIGHT PER DOORSD-6000 MS-7000

INCHES mm INCHES mm lbs. kg. lbs. kg.12 X 12 305 X 305 12-3/8 X 12-3/8 314 X 314 22 10 14 6.416 X 16 406 X 406 16-3/8 X 16-3/8 416 X 416 30 13.8 20 9.118 X 18 457 X 457 18-3/8 X 18-3/8 467 X 467 46 21 26 11.824 X 24 610 X 610 24-3/8 X 24-3/8 619 X 619 70 31.8 34 15.424 X 36 610 X 914 24-3/8 X 36-3/8 619 X 924 90 41 55 2536 X 36 914 X 914 36-3/8 X 36-3/8 924 X 924 12 54.5 80 36.4

jenniferwyse

accessdoor.pdf

DESCRIPTIONAcudor Duct Access Doors are designed to provide convenient, economical access to duct components. The insulated door panel, along withthe gasketing between the door and frame assures a tight seal without obstruction in the air system. Acudor duct access doors are availablein either hinged (HD-5070) or double cam (CD-5080) construction.Options:• ALUMINUM • STAINLESS STEEL • HIGH PRESSURE • FIBERGLASS DUCT DOORS • VISION PANELS • WALK IN DOORS • DOORS FOR ROUND DUCTS

LIGHT WEIGHT ALUMINUM ACCESS DOOR

HD-5070

Rear View

SPECIFICATIONSDoor: 24 gage galvanized steel,

double panel.Frame: 24 gage galvanized steel

with 5/8" notched knock over tabs.

Hinge: Continuous aluminum piano hinge (HD-5070 only).

Insulation: Door panel filled with 2" fiberglass insulation (7.7 R factor), compressedinto 1".

Gasketing: 1/8" thick by 1/2" wide closed cell neoprene gasketing between door and frame and also betweenframe and duct.

Latch: Self tightening, hand operated cam latch.


24GA Galv. steel door& frame

WSheetmetalduct

5/8” Notched knock-over edges

Gasket

Cam latch

1-1/4”

Continuous hinge (HD-5070 only)

DUCT DOOR

Duct opening = W + 1/4”

NOMINAL DOOR SIZE DUCT OPENING WEIGHT W & H PER DOOR

INCHES mm lbs. kg.6 X 6 150 X 150 4-3/4 X 4-3/4 1-1/4 0.68 X 8 200 X 200 6-3/4 X 6-3/4 1-3/4 0.8

10 X 10 250 X 250 8-3/4 X 8-3/4 2-3/4 1.312 X 12 300 X 300 10-3/4 X 10-3/4 3-3/4 1.714 X 14 350 X 350 12-34 X 12-3/4 4-3/4 2.216 X 16 400 X 400 14-3/4 X 14-3/4 5-1/4 2.418 X 18 450 X 450 16-3/4 X 16-3/4 6-3/4 3.120 X 20 500 X 500 18-3/4 X 18-3/4 9 4.124 X 24 610 X 610 22-3/4 X 22-3/4 12 5.5

2” Fiberglassinsulation

LT-4000

SPECIFICATIONSMaterial: Aluminum: .064 door and .080 frameDoor: Flush to edge of frameFrame: 1-5/16” mitered aluminum extrusion flange with 1-1/2” deep mounting frameHinge: Doors with width 24” or less to have concealed pin hinge. Doors with width over 24” to have

continuous aluminum piano hinge with exposed knuckle, set to open to 180 degreesInsulation: 3/4” polystyrene insulation, with 4.0 r-value at 75 degrees F mean temperatureGasketing: (if required) 1/8” x 3/8” closed cell neoprene gasketingLatch: Screwdriver operated cam latch. Also available: cylinder lock & keyFinish: Mill finish


Latch

Continuous hinge

W

1-1/2”

1-5/16”

Drywall

.064 Aluminum door Drywall Insulation

9/32” Dia. holes

Metalstud

Metalstud

LT-4000


DESCRIPTIONThe Acudor LT-4000 is a lightweight aluminumaccess door for walls and ceilings. With a durabledesign and lightweight components, access to largeopenings in walls and ceilings is made easy. Themitered aluminum frame provides an architecturallypleasing appearance. The aluminum door panel islined with 3/4" polystyrene insulation. The all aluminum construction of the LT-4000 is ideal forexterior applications, and also those specific interiorapplications where corrosion or moisture is a concern. Optional gasketing between the door andframe can be provided to insure an airtight fit.

*Double Leaf

NOMINAL DOOR SIZE WALL OR CEILING OPENING WEIGHT PER DOORW & H NO. OF LT-4000

INCHES mm INCHES mm LATCHES lbs. kg.8 X 8 203 X 203 8-5/8 X 8-5/8 220 X 220 1 2 .9

10 X 10 254 X 254 10-5/8 X 10-5/8 271 X 271 1 3 1.412 X 12 305 X 305 12-5/8 X 12-5/8 322 X 322 1 4 1.814 X 14 355 X 355 14-5/8 X 14-5/8 372 X 372 1 5 2.318 X 18 457 X 457 18-5/8 X 18-5/8 474 X 474 1 6 2.724 X 24 610 X 610 24-5/8 X 24-5/8 627 X 627 1 9 4.124 X 36 610 X 914 24-5/8 X 36-5/8 627 X 931 2 12 5.524 X 48 610 X 1220 24-5/8 X 48-5/8 627 X 1237 2 16 7.330 X 30 762 X 762 30-5/8 X 30-5/8 779 X 749 2 12 5.536 X 36 914 X 914 36-5/8 X 36-5/8 931 X 931 2 16 7.336 X 48 914 X 1220 36-5/8 X 48-5/8 931 X 1237 2 21 9.648 X 48* 1220 X 1220 48-5/8 X 48-5/8 1237 X 1237 4 27 12.360 X 48* 1524 X 1220 60-5/8 X 48-5/8 1541 X 1237 4 34 15.572 X 48* 1830 X 1220 72-5/8 X 48-5/8 1847 X 1237 4 40 18.2

Aluminum Frame .080

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor ASVB is a surface mounted valve box designed to provide easy, convenient access to all types of valves and controls that extend outside of the finished wall, but need to be protected by a fully enclosed box. The depth of the valve box can be modified to meet all valve and control requirements. When required, vision panels, louvers and engraved plates can be supplied along with special holes for pipes or conduits.

DESCRIPTIONAcudor Recessed Valve Boxes ARVB are designed to provide easy, convenient access to all types of valves and controls that need to beconcealed in the wall, but protected by a fully enclosed box. The depth of the valve box can be modified to meet all the valve and controlrequirements. When required, vision panels, louvers, engraved plates can be supplied, along with special holes for pipes or conduits.

ASVBSurface Mounted Valve Box

ARVBRecessed Valve Box

SPECIFICATIONSMaterial: Stainless Steel or Steel: 16 gage door and boxDoor: Overlaps box, providing for a tight secure fitBox: Fully enclosed, attached to door.

When required, box can be made with open backHinge: Continuous, exposed piano hingeLatch: Cylinder lock & key. Also available: screwdriver operated

cam latch, allen head cam latch, spanner head cam latch, flush paddle handle, thumb turn latch

Finish: Stainless Steel: #4 satin polishSteel: 5 stage iron phosphate preparationwith prime coat of white baked enamel.

Depth

Metalstud

Drywall

Screw to frame thru .250x .500 slots

Cylinder lock & key

W

S.S.Pianohinge

ASVB

Masonry

16GA Door & box

DepthMetalstud

Wall opening = W + 3/8”

Screw to framethru .250 x .500 slotsW

Drywall1”

ARVB

Masonry

16GA Door & box


Cylinder lock & key

SPECIFICATIONSMaterial: Stainless Steel or Steel: 16 gage door, frame, boxDoor: Flush to frame — rounded safety cornersFrame: One piece outer flange welded to boxBox: Fully enclosed, completely attached to frame

When required, box can be made with open backHinge: Continuous, concealed Latch: Cylinder lock & key

Also available: screwdriver operated cam latch,spanner head cam latch, flush paddle handle,thumb turn latch

Finish: Stainless Steel: #4 satin polishSteel: 5 stage iron phosphate preparationwith prime coat of white baked enamel

NOMINAL DOOR SIZE WALL OPENING SIZE W X H WEIGHTW X H X D (FOR ARVB ONLY) NO. OF PER UNIT

INCHES mm INCHES mm LATCHES lbs. kg.8 X 8 X 4 203 X 203 X 101 8-3/8 X 8-3/8 213 X 213 1 5 2.38 X 8 X 6 203 X 203 X 152 8-3/8 X 8-3/8 213 X 213 1 7 3.28 X 8 X 8 203 X 203 X 203 8-3/8 X 8-3/8 213 X 213 1 9 4.1

12 X 12 X 4 305 X 305 X 101 12-3/8 X 12-3/8 314 X 314 1 9 4.112 X 12 X 6 305 X 305 X 152 12-3/8 X 12-3/8 314 X 314 1 12 5.512 X 12 X 8 305 X 305 X 203 12-3/8 X 12-3/8 314 X 314 1 14 6.4

DESCRIPTIONThe Acudor WD-8000 Walk Through Access Door is designed to provide convenient walk through access to duct work interiors andair handling units. The heavy duty construction, along with a continuous hinge and compression handles provide for low leakage in low to medium pressure systems and plenums.

SPECIFICATIONSDoor: 20 gage galvanized steel, double panelFrame: 1 15/16” wide x 1 1/2” deep extruded aluminum with mitred cornersHinge: Continuous steel piano hinge-opens 1800Insulation: Door panel filled with 2” thick fiberglass insulationGasketing: 1/8” thick x 1/2” wide closed cell neoprene gasketing between door and frameLatch: Dual acting compression handles-operable from both sides. Units 48” high and under to have 2 handles

Units over 48” high to have 3 handlesFinish: Mill finish

STANDARD SIZES (special sizes available upon request)• 24”x36”/24”x48”/24”x60”/24”x72” • 30”x36”/30”x48”/30”x60”/30”x72”

OPTIONAL FEATURES:• Removable Door Panel / Vision Panel / High Pressure Units / Key Operated Handles

WD-8000Walk Through Access Door

VALVE BOXES

WALK THROUGH ACCESS DOOR

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor FA series aluminum floor access doors are designed for interior and exterior applications where watertightness is not required. The angle frame construction with integralanchor flange is designed to be cast into concrete. The diamond plate door panel is equippedwith a flush aluminum drop handle and an automatic hold open arm with red vinyl grip.

DESCRIPTIONThe Acudor FC Series aluminum floor access doors are designed for interior and exterior applications where watertightness is required. The channel frame construction with 1-1/2"drainage coupling and integral anchor flange is designed to be cast into concrete. The diamondplate door panel is equipped with a flush aluminum drop handle and an automatic hold openarm with red vinyl grip.

FA-150/FA-300/FA-H20Angle Frame Construction

FC-300/FC-H20Channel Frame Construction

SPECIFICATIONSMaterial: Aluminum door and frame; stainless steel hinges and hardwareDoor: FC-300: 1/4" aluminum diamond plate reinforced for live load

of 300 pounds/sq. ft.FC-H20: 1/4" aluminum diamond plate reinforced to meet AASHTO specification H20-44 for traffic loading (16,000 lb.wheel load with 30% added for impact.)

Frame: Channel frame fabricated from aluminum extrusion with 1-1/2" drainage coupling and integral 1" anchor flange

Hinge: Stainless steel butt hinges with tamperproof stainless steel bolts and nutsOpening Automatic hold open arm with red vinyl grip allows door panel Device: to open to 90 degrees, locking door in open position, and allowing for easy control

when closing door panel. When required, stainless steel compression springs can be provided to add lift assistance.

Latch: Flush aluminum drop handle with staple for padlockFinish: Mill finish, with optional bituminous coating on exterior of frame

SPECIFICATIONSMaterial: Aluminum door and frame; stainless steel hinges and hardwareDoor: FA-150: 3/16" aluminum diamond plate reinforced for live load

of 150 pounds/sq. ft.FA-300: 1/4" aluminum diamond plate reinforced for live loadof 300 pounds/sq ft.FA-H20: 1/4" aluminum diamond plate reinforced to meet AASHTO specifications H20-44 for traffic loading (16,000 lb.wheel load with 30% added for impact)

Frame: Angle frame fabricated from aluminum extrusion with an integral 1” anchor flange

Hinge: Stainless steel butt hinges with tamperproof stainless steel bolts and nuts

Opening Automatic hold open arm with red vinyl grip allows door panel Device: to open to 90 degrees, locking door in open position, and

allowing for easy control when closing door panel. Whenrequired, stainless steel compression springs can be provided to add lift assistance

Latch: Flush aluminum drop handle with staple for padlock Finish: Mill finish, with optional bituminous coating on exterior of frame

FLOOR ACCESS DOORS

STANDARD SIZES (special sizes available upon request)STANDARD SIZES (special sizes available upon request)

*Double Leaf *Double Leaf

WAutomatic hold open arm withred vinyl grip

3”

FA-150/300/H20

W + 6”

W

Automatic hold open arm withred vinyl grip

1-1/2” Dia. drain

4”

FC-300/H20

W x H FA-150 FA-300 FA-H20INCHES mm lbs. kg. lbs. kg. lbs. kg.24 X 24 610 X 610 30 13.6 40 18.2 55 2524 X 30 610 X 762 40 18.2 50 22.7 65 29.524 X 36 610 X 914 45 20.4 55 25 75 3430 X 30 762 X 762 45 20.5 55 25 80 36.430 X 48 762 X 1220 65 29.5 80 36.4 125 56.836 X 36 914 X 914 60 27.2 75 34 110 49.936 X 48 914 X 1220 70 31.8 90 41 150 68.142 X 42 1067 X 1067 75 34 95 43.1 170 77.248 X 48* 1220 X 1220 95 43.1 120 54.5 200 90.848 X 72* 1220 X 1829 130 59 165 74.9 295 133.960 X 60* 1524 X 1524 140 63.6 170 77.2 330 149.8

NOMINAL DOOR SIZE WEIGHT PER UNITW x H FC-300 FC-H20

INCHES mm lbs. kg. lbs. kg.24 X 24 610 X 610 60 27.2 80 36.424 X 30 610 X 762 70 31.8 100 45.424 X 36 610 X 914 75 34 110 49.930 X 30 762 X 762 80 36.4 110 49.930 X 36 762 X 914 90 41 125 56.836 X 36 914 X 914 100 45.4 140 63.636 X 48 914 X 1220 120 54.5 160 72.642 X 42 1067 X 1067 125 56.8 170 77.248 X 48* 1220 X 1220 155 70.4 240 10948 X 72* 1220 X 1829 210 95.3 345 156.660 X 60* 1524 X 1524 220 98.9 380 172.5

jenniferwyse

accessdoor.pdf

DESCRIPTIONThe Acudor FT series aluminum floor access doors are designed for interior and exterior applications that require an access opening that will blend in with the surrounding floor material.The FT-8040 is recessed 1/8" to accomodate carpeting and vinyl tile. The FT-8050 is recessed1" to accomodate ceramic tile, terrazzo and concrete.

DESCRIPTIONThe Acudor FD-8060 aluminum floor access door is designed for interior applications wherewatertightness is not required. The flush diamond plate door panel stays secured to the framewith flat head screws and is completely removable.The Acudor FT-8080 floor access door is designed for interior and exterior applications thatrequire an access opening that will blend in with the surrounding floor material. To keep thefloor material from cracking or chipping within the door panel, the securing screws are locatedin the flange of the mounting frame.

FT-8040Recessed 1/8” for Vinyl Tile/Carpet

FT-8050Recessed 1” for Concrete/Ceramic Tile

FD-8060Non Hinged: Flush Diamond Plate

FT-8080Recessed for Tile/Carpet/Concrete

SPECIFICATIONSMaterial: AluminumDoor: FD-8060: 1/4" aluminum diamond plate reinforced for the

live load of 150 pounds/per sq. ft.FT-8080: 1/4" smooth aluminum plate reinforced for live load of 150 pounds/sq. ft., recessed 1/8” for carpet/vinyl tile or 1” for ceramic tile/concrete.

Frame: FD-8060: 1" x 1" aluminum angle designed to be cast into concrete.FT-8080: 1-1/2" x 1-1/4" aluminum angle with mounting holes in top flange.

Latch: Door panel is secured to frame with 1/4" x 1" flat head screws.Finish: Mill Finish.

SPECIFICATIONSMaterials: Aluminum door and frame; stainless steel hinges and hardwareDoor: 1/4" smooth aluminum plate reinforced for live load of 150 pounds/sq. ft.

Extruded edging is welded to door panel, providing a 1/8" recess (FT-8040)/1" recess (FT-8050)

Frame: FT-8040: Angle frame fabricated from aluminum extrusion with integral 1" anchor flange on three sides and welded anchor straps on the hinge sideFT- 8050: Channnel frame fabricated from aluminum extrusion with 1-1/2”drainage coupling and integral 1" anchor flange

Hinge: FT-8040: Extruded aluminum hinges are welded to inside of door panel and pivot on stainless steel pins FT-8050: Stainless steel continuous piano hingeOpening - Automatic hold open arm with red vinyl grip allows

Device: door panel to open to 90 degrees, locking door in open position, and allowingfor easy control when closing door panel Stainless steel torsion bars (FT-8040)/compression springs (FT-8050) add lift assistance.

Latch: Stainless steel slamlock with a fixed inside handle, removable outside handle, and removable threaded plug.

Finish: Mill finish with bituminous coating applied to exterior of frame.

FLOOR ACCESS DOORS



*Double Leaf

W

Torsion bar

3”

3 3/8”

Masonry opening

Anchor strap

FT-8040

Aluminum extruded hinge

Stainless steel slamlock1/8” Floor covering(By others)

S S Slamlock

W

4-1/4”

S S Spring

Continuous S.S. hinge

FT-8050

Stainless steel cover plug

Opening = W - 1-1/4”

W + 2”

W

1”

1/4-20 FHMS x 1”LNG

FD-8060 Flush, Diamond Plate

1/4” Aluminum diamond plate(150 P.S.F.)

1/8” Recess for carpet/tile 1” recess for ceramic tile/concrete

9/32” Dia. CSK. mount-ing holes for 1/4-20 FHMS,(4) Loc, (4) Loc.

W

1”

FT-8080 Recessed

W + 3-1/4”

W + 3/4”

1-1/4”

W + 2”

NOMINAL DOOR SIZE WEIGHT PER UNITW x H FT-8040 FT-8050

INCHES mm lbs. kg. lbs. kg.24 X 24 610 X 610 45 20.5 70 31.824 X 30 610 X 762 55 25 80 36.424 X 36 610 X 914 60 27.2 90 4130 X 30 762 X 762 60 27.2 110 49.930 X 36 762 X 914 70 31.8 100 45.436 X 36 914 X 914 75 34 115 52.242 X 42 1067 X 1067 100 45.4 140 63.648 X 48* 1220 X 1220 155 70.4 195 88.548 X 72* 1220 X 1829 220 99.9 265 120.360 X 60* 1524 X 1524 225 102.2 275 124.9

NOMINAL DOOR SIZE WEIGHT PER UNITW x H FD-8060 FT-8080

INCHES mm lbs. kg. lbs. kg.8 X 8 203 X 203 4 1.8 6 2.7

12 X 12 305 X 305 6 2.7 9 4.118 X 18 457 X 457 12 5.5 18 8.224 X 24 610 X 610 24 10.9 36 16.3

jenniferwyse

accessdoor.pdf

D SCR PT ONAcudor Roof Hatches are designed to provide convenient, economical access to the Roof of a building. Available in prime coated galvanized steel or aluminum.Our hatches are designed with safety, durability and ease of operation in mind.

• Acrylic domes • Stainless Steel Hardware • Modified curb for metal building • Louvered Curbs • Curb Mounted Units

c o• · Safety Ladder Extension (SLE-Y) • Telescoping Safety Post (TRP-1) • Safety Railing System

SLE-Y

SPEC CATIONSCover: 14 gage galvanized steel/.102 aluminum in box type design with 1” cellulose Insulation and 22 gage galvanized steel/.032 aluminum cover liner. Continuous EPDM weather/draft

seal gasket is attached to inside of cover, providing a flush tight fit. The cover is designed to support a live load of 40 pounds/sq ft.Curb: 14 gage galvanized steel/ .102 aluminum with 1” thick fiber board roof Insulation at curb exterior. Curb is 12” high, with 3.375” wide bottom flange and pre-drilled mounting holesHinge: 11 Gage Galvanized steel/ 3/16” aluminum pivot hingesOpening Gas spring operators allow cover to open and close with ease. Built in hold open arm locks cover into open position. Inside pull handle allows for easy control when closing cover.Latch: Self Latching zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.Finish: Galvanized Steel: Grey baked enamel polyester

Aluminum : Mill finish

STANDARD SIZES (special sizes available upon request)MODEL NO. SIZE MATERIAL SHIPPING

WEIGHT

INCHES mm lbs. kg.

G3232 24 X 24 610 X 610 GALVANIZED 125 56.8G3244 24 X 36 610 X 914 GALVANIZED 135 61.4G3844 30 X 36 762 X 914 GALVANIZED 155 70.5G4444 36 X 36 914 X 914 GALVANIZED 170 77.3G5656 48 X 48 1220 X 1220 GALVANIZED 185 84.0G3862 30 X 54 762 X 1372 GALVANIZED 225 102.3G38104 30 X 96 762 X 2438 GALVANIZED 335 152.3A3232 24 X 24 610 X 610 ALUMINUM 60 27.3A3244 24 X 36 610 X 914 ALUMINUM 70 31.8A3844 30 X 36 762 X 914 ALUMINUM 85 38.6A4444 36 X 36 914 X 914 ALUMINUM 95 43.2A5656 48 X 48 1220 X 1220 ALUMINUM 115 52.3A3862 30 X 54 762 X 1372 ALUMINUM 135 61.4A38104 30 X 96 762 X 2438 ALUMINUM 245 111.4

TSP-1

ROOF HATCHES & SAFETY ACCESSORIES

jenniferwyse

accessdoor.pdf

ACCESS · PDF fileStainless Steel Prime Coated Steel ... The Acudor FW-5050-UP is a fire...

Documents

Transcript of ACCESS · PDF fileStainless Steel Prime Coated Steel ... The Acudor FW-5050-UP is a fire...