AC Axial Fan Blower - Transfer Multisort Elektronik ... Axial Fan & Blower I S O / T S 16 94 I S O 9...
Transcript of AC Axial Fan Blower - Transfer Multisort Elektronik ... Axial Fan & Blower I S O / T S 16 94 I S O 9...
ISO
/TS16949
ISO
9001:2000
Certification
* Note: For critical or extreme environments, including non stop operation, please contact Sunon and we will gladly provide assistance with your product selection to ensure an appropriate cooling product for your application.* Note: The “Life Expectancy” of the fan has not been evaluated for use in combination with any end application. Therefore,the Life Expectancy Test Reports(L10 and MTTF Report) that relate to the fan are only for reference.
Table of Contents
Sunon AC Axial Fan & BlowerPage
p.01p.02
p.03p.04p.05p.06p.07p.08p.09p.10p.11p.12p.13p.14p.15p.16p.17p.18p.19p.20p.21p.22p.23p.24
17.5 ~ 18 28 ~ 29 40 ~ 41 17 ~ 22 23 ~ 31 52 ~ 54 21 ~ 37 46 ~ 80 46 ~ 80
70 ~ 117 70 ~ 117 85 ~ 100 95 ~ 117 112 ~ 124 95 ~ 115 49 ~ 50 180 ~ 200 203 ~ 239 203 ~ 239 315 ~ 335 425 ~ 870
20 ~ 22
Air Flow (CFM)
Engineering InformationFan Model Numbering System
AC Fan Series60x60x25mm (MagLev Motor AC Fan)70x70x25mm (MagLev Motor AC Fan)80x80x25 mm (MagLev Motor AC Fan)80x80x25mm 80x80x38mm92x92x25mm (MagLev Motor AC Fan)92x92x25mm120x120x25mm (115V)120x120x25mm (220-240V)120x120x38mm (115V)120x120x38mm (220-240V)120x120x38mm (Plastic Frame)120x120x38mm (New Type)120x120x38mm (New Type-High Air Flow)120x120x38mm (Dual AC Voltage)120x120x38mm (Low Power Consumption)171x151x51mm 171x151x51mm ( Alveolate Motor)ø171x51mm ( Alveolate Motor)176x176x89mm ( Alveolate Motor)ø254x89mm ( Alveolate Motor)120x120x31mm (Blower)
N N N N
01
ENGINEERING INFORMATION
Sunon-Alveolate Motor VS. Traditional Shaded-pole Motor
SUNON-Alveolate Motor
1.The Alvolate Motor is equipped with startingstator coils and working ones. The starting coilsform a low starting voltage with the capacitors.For example, an 115VAC (the fixed voltage)Alveolate Motor can be started with 60 VAC.
Traditional Shaded-Pole Motor
1.The Traditional Shaded-Pole Motor, designedwith single-wire wrapping, is started by “thestarting copper”and cannot be started with low voltage. An 115VAC Traditional Shaded-Pole motor will need more than 80VAC to run,20VAC more than the Alveolate one.
2.The Traditional Shaded-Pole Motor consumeselectricity twice as much as the AlveolateMotor. It is not reliable because thetemperature is usually higher than 70℃.
3.The Thermal Cutout is an option.
4.General wind pressure and wind volume.
5.Without the third wire.
2.The coils do not produce high temperature andconsumes less electricity. The temperature isnormally around 50℃. Therefore, the motor isalways stable and reliable.
3.The Thermal Cutout can protect the motor.
4.The motor has a large torsion to produce highwind pressure and wind volume.
5.The motor is equipped with the third wire, readyto comply with the customer’s systems.
Alveolate Motor AC fan series with automatic motor-wirewrapping technology ensures stable performance of highwind volume, low acoustic noise, also available withfunctions of dual spinning rate, andthermal cutout.
02
MODEL SERIESA : New AC fan seriesAB : New AC blower series MA : MagLev AC Fan series
VOLTAGE1 : 115 VAC 3 : 380 VAC 2 : 220-240 VAC
FRAME SIZE08 : 80 mm 17 : 172 mm09 : 92 mm 25 : 254 mm12 : 120 mm
FRAME THICKNESS2 : 25 mm 7 : 72 mm 3 : 31~38mm 9 : 89~90mm5 : 50~51 mm
TERMINALST : TerminalL : Lead wire
BEARING SYSTEMV: MagLevS : SleeveB : Ball
SPEEDX : Super H : HighM : MiddleL : Low
MODEL SERIESSFxxxSPxxxDPxxx
VOLTAGE1 : 115 VAC 2 : 220 -240 VAC
FRAME SIZE08 : 80 mm09 : 92 mm12 : 120 mm
FRAME THICKNESS2 : 25 mm3 : 38 mm
RoHS Compliance
TERMINALST : TerminalL : Lead wire
BEARING SYSTEMB : Ball S : Sleeve
SPEEDX : Super H : HighM : MiddleL : Low
P/N Suffixes have the following significance : T : Thermal Cutout TC : Alveolate Motor with Thermal Cutout and Capacitor TC.R : Round Frame , Alveolate Motor with Thermal Cutout and Capacitor N : New frame GN : RoHS compliance* Alveolate Motor only available in P/N : TC model
P/N
General AC Fan
Ex) SF11580AT 1 08 2 H B L .GN
Ex) A 1 17 5 H B T
New Type AC Fan
AC Fan Model Numbering System
17.5~18 CFM
60x60x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
03
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
MA1062-HVLMA2062-HVL
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115220-240
50/6050/60
0.191/0.1850.198/0.211
3.6/3.64.1/4.4
4100/42004100/4200
17.5/1817.5/18
0.19/0.200.19/0.20
30/3130/31
8181
P/N
GNGN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : PBT Plastic
INLET OUTLET
ø65.6
ø63.5
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
Vapo (50Hz) Vapo (60Hz)
50±0.360±0.5
ROTATION
#24AWG
25±0.50
5±0.
330
0±30
AIR FLOW8-ø4.3±0.3
0.08
0.06
0.04
0.02
05 10 15 20
0.12
0.1
0.16
0.14
0.2
0.18
0.08
0.06
0.04
0.02
05 10 15 20
0.12
0.1
0.16
0.14
0.2
0.18
MagLev Motor AC Fan
28~29 CFM
70x70x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
04
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
MA1072-HVLMA2072-HVL
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115220-240
50/6050/60
0.208/0.1970.207/0.220
3.7/3.74.3/4.4
3800/39003800/3900
28/2928/29
0.17/0.180.17/0.18
30/3130/31
9090
P/N
GNGN
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : PBT Plastic
0
0.03
0.06
0.09
0.12
0.15
0.18
6 12 18 24 30
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
HVL HVL
Vapo (50Hz) Vapo (60Hz)
0
0.03
0.06
0.09
0.12
0.15
0.18
6 12 18 24 30
ROTATION
70±0.5
60±0.3
5±0.
330
0±10
#24AWG
AIR FLOW
25±0.50
8-ø4.3±0.3INLET OUTLET
ø79 ø80.3
VAPOBALLSleeve
MagLev Motor AC Fan
40~41 CFM
80x80x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
05
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
MA1082-HVLMA2082-HVL
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115220-240
50/6050/60
0.22/0.210.215/0.225
3.6/3.64.6/4.6
3200/33003200/3300
40/4140/41
0.14/0.150.14/0.15
32/3332/33
102.2102.2
P/N
GNGN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : PBT Plastic
8-ø4.3±0.3
ROTATION
71.5±0.3
80±0.5
5±0.
330
0±10
#24AWG
AIR FLOW
25±0.50
ø87.2 ø91.8
OUTLETINLET
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
HVLHVL
7 14 21 28 35 420
0.02
0.04
0.06
0.08
0.1
0.16
0.12
0.14
7 14 21 28 35 420
0.02
0.04
0.06
0.08
0.1
0.16
0.12
0.14
Vapo (50Hz) Vapo (60Hz)
MagLev Motor AC Fan
17~22 CFM
80x80x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
06
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
SF11580ATSF11580ATSF23080ATSF23080AT
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115
220-240220-240
50/6050/6050/6050/60
0.12/0.100.12/0.100.07/0.070.07/0.07
12/1112/1114/13.514/13.5
2300/27502450/29002300/27502450/2900
17/2118/2217/2118/22
0.12/0.180.13/0.190.12/0.180.13/0.19
29/3330/34.529/3330/34.5
260260260260
P/N
1082HSL.GN1082HBL.GN2082HSL.GN2082HBL.GN
Sleeve
Safety : UL-CUL/TUV NORD/CE/CCC/BSMIFrame : Aluminum alloy
ø77 ø76
OUTLETINLET
8-ø4.3±0.3
#24AWG
330±
15
5
71.5±0.3
80±0.5
ROTATION AIR FLOW
GROUND LUG M4
3.7±0.3
25.5±0.5
Model
Ball (50Hz) Ball (60Hz) Sleeve (50Hz) Sleeve (60Hz)
Airflow (CFM)
Stat
ic P
ress
ure
(Inch
-H2O
)
0.08
0.04
06 12 18 24
0.12
0.16
0.2
0.08
0.04
06 12 18 24
0.12
0.16
0.2
0.08
0.04
06 12 18 24
0.12
0.16
0.2
0.08
0.04
06 12 18 24
0.12
0.16
0.2
23~31 CFM
80x80x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
07
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
SF11580ASF11580ASF23080ASF23080A
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115
220-240220-240
50/6050/6050/6050/60
0.15/0.130.15/0.130.09/0.080.09/0.08
14/1214/1218/1618/16
2300/27502400/28502300/27502400/2850
23/3024/3123/3024/31
0.12/0.180.13/0.190.12/0.180.13/0.19
31/3532/36.531/3532/36.5
340340340340
P/N
1083HSL.GN1083HBL.GN2083HSL.GN2083HBL.GN
Sleeve
Safety : UL-CUL/TUV NORD/CE/CCC/BSMIFrame : Aluminum alloy
ø76.6ø74.8
OUTLETINLET
8-ø4.3±0.3
#24AWG
330±
15
5
80±0.538.5±0.5
4±0.3
2 GROUND LUG M4
AIR FLOW
71.5±0.3
ROTATION
Model
Ball (50Hz) Ball (60Hz) Sleeve (50Hz) Sleeve (60Hz)
Airflow (CFM)
Stat
ic P
ress
ure
(Inch
-H2O
)
0.08
0.04
04 8 12 16 2420 28 32
0.12
0.16
0.2
0.08
0.04
04 8 12 16 2420 28 32
0.12
0.16
0.2
0.08
0.04
04 8 12 16 2420 28 32
0.12
0.16
0.2
0.08
0.04
04 8 12 16 2420 28 32
0.12
0.16
0.2
52~54 CFM
92x92x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
08
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
MA1092-HVLMA2092-HVL
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115220-240
50/6050/60
0.114/0.1180.103/0.106
3.6/3.64.6/4.6
2900/30002900/3000
52/5452/54
0.12/0.140.12/0.14
31/3231/32
119.7119.7
P/N
GNGN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : PBT Plastic
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
5 15 25 35 45 55
HVL HVL
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
5 15 25 35 45 55
Vapo (50Hz) Vapo (60Hz)
8-ø4.3±0.3ROTATION
82.5±0.3
92±0.5
5±0.
330
0±10
#24AWG
AIR FLOW
25±0.50
ø91.8ø103.5
OUTLETINLET
MagLev Motor AC Fan
21~37 CFM
92x92x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
09
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
SF11592ASF11592ASF11592ASF11592ASF11592ASF11592ASF11592ASF11592ASF23092ASF23092ASF23092ASF23092ASF23092ASF23092ASF23092ASF23092A
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115115115115115115115
220-240220-240220-240220-240220-240220-240220-240220-240
50/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/60
0.12/0.110.12/0.110.06/0.060.06/0.060.12/0.110.12/0.110.07/0.060.07/0.060.07/0.060.07/0.060.07/0.070.07/0.070.07/0.060.07/0.060.07/0.070.07/0.07
13/1213/12
7/67/6
13/1213/12
7/67/6
14.5/1414.5/1415/1415/14
14.5/1414.5/1415/1415/14
2250/27502250/27501550/17001550/17002350/28502350/28501800/21001800/21002250/27502250/27502000/25002000/25002350/28502350/28502200/27002200/2700
29/3629/3621/2621/2630/3730/3723/2823/2829/3629/3627/3327/3330/3730/3728/3528/35
0.12/0.180.12/0.180.08/0.090.08/0.090.13/0.190.13/0.190.10/0.110.10/0.110.12/0.180.12/0.180.11/0.160.11/0.160.13/0.190.13/0.190.12/0.180.12/0.18
36/3936/3928/3028/3037/4037/4031/3331/3336/3936/3932/3732/3737/4037/4035/3835/38
280280280280280280280280280280280280280280280280
P/N
Sleeve
Safety : UL-CUL/TUV NORD/CE/CCC/BSMI
ø89ø87
OUTLETINLET8-ø4.3±0.3
ROTATION
#24AWG
25.5±0.5
3.5±0.3
TERMINAL TYPE7.5(THICK 0.5)
310±
155
GROUND LUG M4
91.5±0.5
82.5±0.3
AIR FLOW
Frame : Aluminum alloy
1092HSL.GN1092HST.GN1092MSL.GN1092MST.GN1092HBL.GN1092HBT.GN1092MBL.GN1092MBT.GN2092HSL.GN2092HST.GN2092MSL.GN2092MST.GN2092HBL.GN2092HBT.GN2092MBL.GN2092MBT.GN
Model
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
Sleeve (50Hz)
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
0.16
0.18
0.2
5 10 15 20 25 30 35 40
HSL/HST
MSL/MST(110V)MSL/MST(220V)
Sleeve (60Hz)
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
0.16
0.18
0.2
5 10 15 20 25 30 35 40
HSL/HST
MSL/MST(110V)MSL/MST(220V)
Ball (50Hz)
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
0.16
0.18
0.2
5 10 15 20 25 30 35 40
HBL/HBT
MBL/MBT(110V)MBL/MBT(220V)
Ball (60Hz)HBL/HBT
MBL/MBT(110V)MBL/MBT(220V)
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
0.16
0.18
0.2
5 10 15 20 25 30 35 40
46~80 CFM
120x120x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
10
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
SP101ATSP101ATSP103ATSP103ATSP101ATSP101ATSP103ATSP103AT
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115115115115115115115
50/6050/6050/6050/6050/6050/6050/6050/60
0.21/0.190.21/0.190.14/0.130.14/0.130.21/0.190.21/0.190.12/0.110.12/0.11
19/1819/1814/1314/1319/1819/18
12.5/11.512.5/11.5
2000/23002000/23001600/18001600/18002150/25002150/25001700/19001700/1900
64/7864/7846/5346/5366/8066/8047/5447/54
0.13/0.160.13/0.160.11/0.120.11/0.120.14/0.170.14/0.170.12/0.130.12/0.13
43/4643/4635/3835/3844/4844/4837/4037/40
330330330330330330330330
P/N
1122HSL.GN1122HST.GN1122LSL.GN1122LST.GN1122HBL.GN1122HBT.GN1122LBL.GN1122LBT.GN
Sleeve
Safety : UL-CUL/TUV NORD/CE/CCC/BSMIFrame : Aluminum alloy
8-ø4.3±0.3GROUND LUG M4
320±
105
#24AWG
104.8±0.3
119±0.5
3.5±0.3
TERMINAL TYPE7.5(THICK 0.5)
AIR FLOW
25.5±0.5
ø115ø115.5
OUTLETINLET
Model
Ball (50Hz) Ball (60Hz) Sleeve (50Hz) Sleeve (60Hz)
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18HSL/HST
LSL/LST
HSL/HST
LSL/LST
46~80 CFM
120x120x25 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
11
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
DP201ATDP201ATDP203ATDP203ATDP201ATDP201ATDP203ATDP203AT
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
220/240220/240220/240220/240220/240220/240220/240220/240
50/6050/6050/6050/6050/6050/6050/6050/60
0.09/0.090.09/0.090.07/0.070.07/0.070.09/0.090.09/0.090.07/0.070.07/0.07
19/1919/1914/1314/1319/1919/1914/1314/13
43/4643/4635/3835/3844/4844/4837/4037/40
295295330330295295330330
P/N
2122HSL.GN2122HST.GN2122LSL.GN2122LST.GN2122HBL.GN2122HBT.GN2122LBL.GN2122LBT.GN
Sleeve
Safety : UL-CUL/TUV NORD/CE/CCC/BSMIFrame : Aluminum alloy
8-ø4.3±0.3GROUND LUG M4
#24AWG
AIR FLOW
532
0±10
104.8±0.3
119±0.5
3.5±0.325.5±0.5
ø115ø115.5
OUTLETINLET
Model
Ball (50Hz) Ball (60Hz) Sleeve (50Hz) Sleeve (60Hz)
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18
0.08
0.06
0.04
0.02
014 28 42 56 8470
0.1
0.12
0.14
0.16
0.18
2000/23002000/23001600/18001600/18002150/25002150/25001700/19001700/1900
64/7864/7846/5346/5366/8066/8047/5447/54
0.13/0.160.13/0.160.11/0.120.11/0.120.14/0.170.14/0.170.12/0.130.12/0.13
HSL/HST
LSL/LST
HSL/HST
LSL/LST
70~117 CFM
120x120x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
12
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
SP100ASP100ASP101ASP101ASP102ASP102ASP103ASP103ASP100ASP100ASP101ASP101ASP102ASP102ASP103ASP103A
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115115115115115115115115115115115115115115115
50/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/60
0.26/0.240.26/0.240.21/0.180.21/0.180.17/0.160.17/0.160.13/0.110.13/0.110.26/0.240.26/0.240.21/0.180.21/0.180.17/0.160.17/0.160.13/0.110.13/0.11
22/2022/2020/1820/1815/1515/1511/1111/1122/2022/2020/1820/1816/1516/1511/1111/11
2700/31002700/31002550/29002550/29002400/26002400/26002200/20002200/20002850/31502850/31502750/30502750/30502500/27002500/27002150/23002150/2300
95/115 95/11585/10585/10578/8478/8476/7076/7097/11797/11787/10787/10780/8880/8872/7872/78
0.33/0.380.33/0.380.25/0.300.25/0.300.14/0.210.14/0.210.12/0.080.12/0.080.34/0.390.34/0.390.26/0.320.26/0.320.15/0.220.15/0.220.09/0.130.09/0.13
44/4944/4943/4843/4833/3833/3838/3638/3645/5045/5045/5045/5035/4035/4037/3937/39
550550550550550550550550550550550550550550550550
P/N
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
1123XSL.GN1123XST.GN1123HSL.GN1123HST.GN1123MSL.GN1123MST.GN1123LSL.GN1123LST.GN1123XBL.GN1123XBT.GN1123HBL.GN1123HBT.GN1123MBL.GN1123MBT.GN1123LBL.GN1123LBT.GN
ø115.5ø116
OUTLETINLET
8-ø4.3±0.3
#24AWG
310±
15
104.8±0.3
119±0.538.5±0.5
4±0.3
5
AIR FLOWROTATION
TERMINAL TYPE7.5(THICK 0.5)
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
15 30 45 60 75 90 105 1200
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
15 30 45 60 75 90 105 1200
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
15 30 45 60 75 90 105 120
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
XBL/XBTHBL/HBTMBL/MBTLBL/LBT
XSL/XSTHSL/HSTMSL/MSTLSL/LST
XSL/XSTHSL/HSTMSL/MSTLSL/LST
XBL/XBTHBL/HBTMBL/MBTLBL/LBT
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
15 30 45 60 75 90 105 120
Ball (50Hz) Ball (60Hz) Sleeve (50Hz) Sleeve (60Hz)
Model
70~117 CFM
120x120x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
13
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
DP200ADP200ADP201ADP201ADP202ADP202ADP203ADP203ADP200ADP200ADP201ADP201ADP202ADP202ADP203ADP203A
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
220-240220-240220-240220-240220-240220-240220-240220-240220-240220-240220-240220-240220-240220-240220-240220-240
50/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/6050/60
0.14/0.120.14/0.120.125/0.110.125/0.110.09/0.080.09/0.080.06/0.050.06/0.050.14/0.120.14/0.120.125/0.110.125/0.110.09/0.080.09/0.080.05/0.060.05/0.06
22/2122/2120/1920/1916/1516/1511/1011/1022/2122/2120/1920/1916/1516/1510/1010/10
2700/31002700/31002550/29002550/29002300/25002300/25002000/18002000/18002850/31502850/31502750/30502750/30502400/26002400/26002300/21502300/2150
95/115 95/11585/10585/10578/8478/8470/6370/6397/11797/11787/10787/10778/8478/8478/7278/72
0.33/0.380.33/0.380.25/0.300.25/0.300.14/0.210.14/0.210.08/0.070.08/0.070.34/0.390.34/0.390.26/0.320.26/0.320.14/0.210.14/0.210.13/0.090.13/0.09
44/4944/4943/4843/4833/3833/3836/3236/3245/5045/5045/5045/5034/3934/3939/3739/37
550550550550550550550550550550550550550550550550
P/N
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
2123XSL.GN2123XST.GN2123HSL.GN2123HST.GN2123MSL.GN2123MST.GN2123LSL.GN2123LST.GN2123XBL.GN2123XBT.GN2123HBL.GN2123HBT.GN2123MBL.GN2123MBT.GN2123LBL.GN2123LBT.GN
ø115.5ø116
OUTLETINLET
8-ø4.3±0.3
310±
15
104.8±0.3
#24AWGAIR FLOW
5
119±0.54±0.3
38.5±0.5
Model
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
Ball (50Hz) Ball (60Hz) Sleeve (50Hz) Sleeve (60Hz)
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
85~100 CFM
120x120x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
14
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
SP109WRSP109WRSP109WRSP109WRDP209WRDP209WRDP209WRDP209WR
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115115115
220-240220-240220-240220-240
50/6050/6050/6050/6050/6050/6050/6050/60
0.25/0.220.25/0.220.25/0.220.25/0.220.13/0.120.13/0.120.13/0.120.13/0.12
22/2022/2022/2022/2022/2122/2122/2122/21
2500/29002500/29002500/29002500/29002500/29002500/29002500/29002500/2900
85/10085/10085/10085/10085/10085/10085/10085/100
0.28/0.350.28/0.350.25/0.300.25/0.300.28/0.350.28/0.350.25/0.300.25/0.30
41/4741/4742/4842/4841/4741/4742/4842/48
465465465465465465465465
P/NModel
1123HST.GN1123HSL.GN1123HBT.GN1123HBL.GN2123HST.GN2123HSL.GN2123HBT.GN2123HBL.GN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : PBT Plastic
ø115.5ø116
OUTLETINLET
4-ø4
.3±0
.3
4-ø4
.3±0
.3
#24AWGAIR FLOW300±10 5±0.3
104.0±0.3
119.5±0.5
7.0±0.538.5±0.5
Ball / Sleeve (60Hz)Ball / Sleeve (50Hz)
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
15 30 45 60 75 90 1050
0.05
0.1
0.15
0.2
0.25
0.3
15 30 45 60 75 90
HST/HSLHBT/HBL
HST/HSLHBT/HBL
95~117 CFM
120x120x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
15
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
A1123-HSTA1123-HSLA1123-HBTA1123-HBLA2123-HSTA2123-HSLA2123-HBTA2123-HBL
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115115115
220-240220-240220-240220-240
50/6050/6050/6050/6050/6050/6050/6050/60
0.28/0.250.28/0.250.28/0.250.28/0.250.14/0.120.14/0.120.14/0.120.14/0.12
23/2023/2023/2023/2023/2023/2023/2023/20
2700/31002700/31002700/31002700/31002700/31002700/31002700/31002700/3100
95/11595/11597/11797/11795/11595/11597/11797/117
0.33/0.380.33/0.380.34/0.390.34/0.390.33/0.380.33/0.380.34/0.390.34/0.39
44/4944/4945/5045/5044/4944/4945/5045/50
525525525525525525525525
P/NModel
GNGNGNGNGNGNGNGN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
ø115 ø114
OUTLETINLET
300±
15
104.8±0.3
119.5±0.5
38.5±0.5
4±0.3
8-ø4.3±0.3
#24AWGAIR FLOW
5
Sleeve (60Hz)Sleeve (50Hz)Ball (60Hz)Ball (50Hz)
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
112~124 CFM
120x120x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
16
Specifications
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
A1123-HSTA1123-HSLA1123-HBTA1123-HBLA2123-HSTA2123-HSLA2123-HBTA2123-HBL
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
115115115115
220-240220-240220-240220-240
50/6050/6050/6050/6050/6050/6050/6050/60
0.28/0.250.28/0.250.28/0.250.28/0.250.14/0.120.14/0.120.14/0.120.14/0.12
23/2123/2123/2123/2124/2224/2224/2224/22
2500/27502500/27502500/27502500/27502500/27502500/27502500/27502500/2750
112/124112/124112/124112/124112/124112/124112/124112/124
0.30/0.280.30/0.280.30/0.280.30/0.280.30/0.280.30/0.280.30/0.280.30/0.28
43/4643/4644/4744/4743/4643/4644/4744/47
525525525525525525525525
P/NModel
(7).GN(7).GN(7).GN(7).GN(7).GN(7).GN(7).GN(7).GN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
20 40 60 80 100 120 1400
0.05
0.1
0.15
0.2
0.25
0.3
0.35
20 40 60 80 100 120 1400
0.05
0.1
0.15
0.2
0.25
0.3
0.35
20 40 60 80 100 120 1400
0.05
0.1
0.15
0.2
0.25
0.3
0.35
20 40 60 80 100 120 140
ø115 ø114
OUTLETINLET
8-ø4.3±0.3
4 G
4±0.3
38.5±0.5119.5±0.5
104.8±0.3
TERMINALTYPE 7.5(THICK0.5)
#24AWGAIR FLOW
300±
15
5±1
High Air Flow
Sleeve (60Hz)Sleeve (50Hz)Ball (60Hz)Ball (50Hz)
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
HBL/HBT HBL/HBT HBL/HBT HBL/HBTHST/HSL HST/HSL HST/HSL HST/HSL
95~115 CFM
120x120x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
17
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
Dual AC Voltage
black
white
whitered red
start start
115VAC
230VAC
black
black
red
blueblue
white
blue
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
SF1212AD
SF1212AD
115220-240
115220-240
50/6050/6050/6050/60
0.27/0.240.13/0.120.27/0.240.13/0.12
21.5/1919.5/1921.5/1919.5/19
2700/31002700/31002700/31002700/3100
95/11595/11595/11595/115
0.33/0.380.33/0.380.33/0.380.33/0.38
44/4944/4944/4944/49
550550550550
P/N
SL.GN
BL.GN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
Model
Wire Connection diagram
Connection Wire
Ball/Sleeve (50Hz) Ball/Sleeve (60Hz)
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
0.15
0.1
0.05
015 30 45 60 9075 105 120
0.2
0.25
0.3
0.35
0.4
8 4G
AIR FLOWROTATION#26AWG
310±
15
5±1
104.8±0.3
119±0.5
4±0.3
38.5±0.5
ø115.5
ø116
8-ø4.3±0.3
OUTLETINLET
49~50 CFM
120x120x38 mm
Air Flow-Static Pressure Characteristics
External dimensions(mm)
18
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
Low Power Consumption
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
DP203ADP203A
220-240220-240
50/6050/60
0.04/0.040.04/0.04
8/88/8
1650/16001650/1600
50/4950/49
0.08/0.070.08/0.07
26/2526/25
550550
P/N
2123LBL.(5).GN2123LBT.(5).GN
Sleeve
Safety : TUV/CE/BSMIFrame : Aluminum alloy
Model
ø115.5ø116
OUTLETINLET
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
LBL/LBT
10 20 30 40 50 600
0.01
0.02
0.03
0.04
0.05
0.08
0.06
0.07
Ball (60Hz)LBL/LBT
10 20 30 40 50 600
0.01
0.02
0.03
0.04
0.05
0.08
0.06
0.07
Ball (50Hz)
8-ø4
.3±0
.3
#24AWG
38.5±0.5
4±0.3
AIR FLOWROTATION
SUNON
104.8±0.3
119±0.5
50±0
.531
0±15
180~200 CFM
171x151x51 mm
External dimensions(mm)
19
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
A1175-HBLA1175-HBTA2175-HBLA2175-HBT
115115
220-240220-240
50/6050/6050/6050/60
0.59/0.480.59/0.480.28/0.240.28/0.24
39/3639/3639/3639/36
2650/29502650/29502650/29502650/2950
180/200180/200180/200180/200
0.48/0.380.48/0.380.48/0.380.48/0.38
52/5552/5552/5552/55
957957957957
P/N
T.GNT.GNT.GNT.GN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
Model
4-ø4.5
±0.3
51±0.5
AIR FLOW
171.5±0.5
#18AWG
151±
0.5
280±108
162±0.5
ROTATION
TERMINAL TYPE7.5(THICK 0.5)
SUNONSUNON
Air Flow-Static Pressure Characteristics
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
Ball (60Hz)
0
0.2
0.1
0.3
0.4
0.5
40 80 120 160 200 240
HBL/HBT
Ball (50Hz)
0
0.2
0.1
0.3
0.4
0.5
40 80 120 160 200 240
HBL/HBT
OUTLETINLET
ø147.8
ø145
203~239 CFM
171x151x51 mm
External dimensions(mm)
20
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
A1175-HBLA1175-HBTA2175-HBLA2175-HBT
115115
220-240220-240
50/6050/6050/6050/60
0.22/0.230.22/0.230.11/0.110.11/0.11
25/2725/2725/2625/26
2800/32002800/32002800/32002800/3200
203/239203/239203/239203/239
0.62/0.690.62/0.690.62/0.690.62/0.69
51/5851/5851/5851/58
908908908908
P/N
TC.GNTC.GNTC.GNTC.GN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
Model
Air Flow-Static Pressure Characteristics
OUTLETINLETø146
ø166
8-ø4.5±0.3
#18AWG
280±
105
161.5±0.5
171.5±0.5
134±
0.5
151±
0.5
46±0.351±0.5
AIR FLOW
Alveolate Motor
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
Ball (60Hz)Ball (50Hz)
0.2
0.1
040 80 120 160 200 240
0.3
0.4
0.5
0.6
0.7
0.2
0.1
040 80 120 160 200 240
0.3
0.4
0.5
0.6
0.7
203~239 CFM
ø171x51 mm
External dimensions(mm)
21
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
A1175-HBLA1175-HBTA2175-HBLA2175-HBT
115115
220-240220-240
50/6050/6050/6050/60
0.22/0.230.22/0.230.11/0.110.11/0.11
25/2725/2725/2625/26
2800/32002800/32002800/32002800/3200
203/239203/239203/239203/239
0.62/0.690.62/0.690.62/0.690.62/0.69
51/5851/5851/5851/58
908908908908
P/N
TC.R.GNTC.R.GNTC.R.GNTC.R.GN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
Model
Air Flow-Static Pressure Characteristics
Alveolate Motor
OUTLETINLET
ø146ø166
8-ø4.5±0.3
#18AWG
280±
105
161.5±0.3
134±
0.5
171.5±0.5
46±0.3
51±0.5
AIR FLOW
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
Ball (60Hz)Ball (50Hz)
0.2
0.1
040 80 120 160 200 240 280
0.3
0.4
0.5
0.6
0.7
0.8
0.2
0.1
040 80 120 160 200 240 280
0.3
0.4
0.5
0.6
0.7
0.8
315~335 CFM
176x176x89 mm
External dimensions(mm)
22
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
A1179-HBTA1179-HBLA2179-HBTA2179-HBL
115115
220-240220-240
50/6050/6050/6050/60
0.25/0.270.25/0.270.11/0.150.11/0.15
24/3024/3023/3023/30
2800/32502800/32502800/32502800/3250
315/335315/335315/335315/335
0.65/0.80.65/0.80.65/0.80.65/0.8
62/6662/6662/6662/66
1960196019601960
P/N
TC.GNTC.GNTC.GNTC.GN
Sleeve
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
Model
Air Flow-Static Pressure Characteristics
Alveolate Motor
8-ø5.8±0.3300±10
8
152.7±0.3 6±0.389±0.5176±0.5
TERMINAL TYPE7.5(THICK 0.5)
AIR FLOW
OUTLETINLET
ø160ø161
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
Ball (60Hz)Ball (50Hz)
0.2
0.1
040 80 120 160 200 240 280 320 360
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.2
0.1
040 80 120 160 200 240 280 320 360
0.3
0.4
0.5
0.6
0.7
0.8
0.9
#20AWG
HBT/HBL HBT/HBL
425~870 CFM
ø254x89 mm
External dimensions(mm)
23
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
Air Flow-Static Pressure Characteristics
Alveolate Motor
OUTLETINLET
ø223.6 ø231.9
16-ø4.5
AIR FLOW
ROTATION
TERMINAL TYPE 7.5 (THICK 0.5)
89±0.5
M5
AIR FLOW
RO
TATION
SUNON
10±1320±10
#20AWG
ø245.5±0.5
ø254±10.5
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
100 200 300 400 500 600 700 800 900 100 200 300 400 500 600 700 800 900
Ball (50Hz) Ball (60Hz)
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
A1259-MBLA1259-MBTA1259-HBLA1259-HBTA1259-XBLA1259-XBTA2259-MBLA2259-MBTA2259-HBLA2259-HBT
115115115115115115
220-240220-240220-240220-240
50/6050/6050/6050/6050/6050/6050/6050/6050/6050/60
0.23/0.230.23/0.230.60/0.650.60/0.650.83/1.100.83/1.100.15/0.130.15/0.130.24/0.270.24/0.27
20/2320/2363/7263/72
88/12088/12023/3023/3056/6056/60
1400/16001400/16002100/19002100/19002600/29002600/29001400/16001400/16002100/19002100/1900
425/500425/500650/585650/585800/870800/870425/500425/500650/585650/585
0.27/0.310.27/0.310.35/0.310.35/0.310.76/0.620.76/0.620.27/0.310.27/0.310.35/0.310.35/0.31
54/5754/5762/6062/6068/7068/7054/5754/5762/6062/60
2300230023002300240024002300230023002300
P/N
Sleeve
TC.N.GNTC.N.GNTC.N.GNTC.N.GNTC.N.GNTC.N.GNTC.N.GNTC.N.GNTC.N.GNTC.N.GN
Model
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
HBL/HBTXBL/XBT
MBL/MBTHBL/HBTXBL/XBT
MBL/MBT
20~22 CFM
120x120x31 mm
External dimensions(mm)
24
Specifications
*All model could be customized. Please contact with Sunon Sales.*Specifications are subject to change without notice. Please Visit SUNON website at http://www.sunon.com for update information.
Air Flow-Static Pressure Characteristics
RatingVoltage
(VAC)
Freq.
(Hz)
PowerCurrent
(AMP)
PowerConsumption
(WATTS)
Speed
(RPM)
AirFlow
(CFM)
StaticPressure
(Inch-H2O)
Noise
(dB(A))
Weight
(g)
Bearing
VAPOBALL
AB1123-HSTAB1123-HSLAB1123-HBTAB1123-HBLAB2123-HSTAB2123-HSLAB2123-HBTAB2123-HBL
115115115115
220-240220-240220-240220-240
50/6050/6050/6050/6050/6050/6050/6050/60
0.25/0.210.25/0.210.25/0.210.25/0.210.14/0.110.14/0.110.14/0.110.14/0.11
20/1820/1820/1820/1820/1820/1820/1820/18
2600/29002600/29002600/29002600/29002600/29002600/29002600/29002600/2900
20/2220/2220/2220/2220/2220/2220/2220/22
0.32/0.460.32/0.460.32/0.460.32/0.460.32/0.460.32/0.460.32/0.460.32/0.46
48/5048/5048/5048/5048/5048/5048/5048/50
678678678678678678678678
P/N
Sleeve
GNGNGNGNGNGNGNGN
Model
Safety : UL-CUL/TUV/CE/CCC/BSMIFrame : Aluminum alloy
48.7±0.552.5±0.5
52.5±0.5 43.5±0.5 31±0.5
37±0.5120.5±0.5
52.5±0.552.5±0.5120.5±0.5 18.75±0.555±0.5
M4 N
UT
AIR FLOW
Stat
ic P
ress
ure
(Inch
-H2O
)
Airflow (CFM)
0
0.1
0.2
0.3
0.4
0.5
0
0.1
0.2
0.3
0.4
0.5
3 6 9 12 15 18 21 24 3 6 9 12 15 18 2421
HBT/HSTHBL/HSL
HBT/HSTHBL/HSL
Ball / Sleeve (50Hz) Ball / Sleeve (60Hz)
2016/07/30 (241-W)© 2016 SUNONWEALTH Electric Machine Industry Co., Ltd.
Sunon Shen Zhen Office (China)TEL:+86-755-26880688
E-mail:[email protected]
Sunon Beijing Office (China)TEL:+86-10-62669511
E-mail:[email protected]
Sunon Wuhan Office (China)TEL:+86-27-81388268
E-mail:[email protected]
Sunon Taipei Office (Taiwan)TEL:+886-2-27992383TEL:
HeadquartersSunonwealth Electric Machine Industry Co., Ltd.
+886-7-8135888
E-mail:[email protected]
:TEL
Sunon Inc. (U.S.A.)+1-714-255-0208
E-mail:[email protected]
TEL:Sunon SAS (Europe)
+33-1-46154515
E-mail:[email protected]