Ac Air Vacume Pump
-
Upload
rogerbusser -
Category
Documents
-
view
224 -
download
0
Transcript of Ac Air Vacume Pump
-
8/6/2019 Ac Air Vacume Pump
1/7
Air vAcuum pump withr134A & r12/22
model 96677
Set up And OperAting inStructiOnS
to xoso, sos j, a a:
Service of air conditioning systems must be done
only by trained and experienced technician to avoid
overlling.
Technicians opening refrigeration circuit in
automotive air conditioning systems MUST be
certied in refrigerant recover and reccling
procedures in compliance with section 609 of Clean
Air Act Amendments of 1990.
For additional information regarding ozone depletion
and air conditioning service regulations, visit EPAs
website: www.ea.govoonewww.ea.govoone
Diagrams within this manual ma not be drawn roortionall.
Due to continuing imrovements, actual roduct ma differ slightl from the roduct described herein.
dsb xs b habo F toos.
3491 Mission Oaks Blvd., Camarillo, CA 93011
vs o bs a: ://.abof.o
ra s aa bfo s s o.
Fa o o so a s sos j.
SAve thiS mAnuAl.
Copyright 2007 by Harbor Freight Tools. All rights reserved. No ortion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the eress written consent of Harbor Freight Tools.
Fo a qsos o a as, as a 1-800-444-3353.
-
8/6/2019 Ac Air Vacume Pump
2/7
Page 2SKU 96677 Fo a qsos, as a 1-800-444-3353.
SAve thiS mAnuAl
Keep this manual for the safety warnings and precautions, assembly, operating,
insection, maintenance and cleaning rocedures. Write the roducts serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
roduct has no number). Kee this manual and the receit in a safe and dr lace for
future reference.
generAl SAFety ruleS
wArning! ra a sos
Fa o foo a sos s bo a s sok,
fre, and/or serious injury. The term pneumatic tool in all of the warnings
listed below refers to our neumatic owered Air Vacuum Pum.
SAve theSe inStructiOnS
wok aa saf
Kee work area clean and well lit. Cluttered or dark areas invite accidents.
K a bsas aa oa a a oo.
Distractions can cause you to lose control.
psoa saf
Stay alert, watch what you are doing and use common sense when operating
a neumatic tool. Do not use a neumatic tool while ou are tired or under
the inuence of drugs, alcohol or medication. A moment of inattention while
operating pneumatic tools may result in serious personal injury.
us saf q. Aas a oo. Safety equipment
such as dust mask, work gloves, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal
injuries.
Dress roerl. Do not wear loose clothing or jewelr. Kee our hair,
clothing and gloves awa from moving arts. Loose clothes, jewelry or long
hair can be caught in moving parts.
If devices are provided for the connection of chemical vapor extraction and
collection facilities, ensure these are connected and roerl used. Use of
these devices can reduce vapor-related hazards.pa oo s a a
Do not force the neumatic tool. Use the correct neumatic tool for our
alication. The correct pneumatic tool will do the job better and safer at the
rate for which it was designed.
dso oo fo a so bfo ak a ajss,
a assos, o so.
1.
a.
b.
2.
a.
b.
c.
d.
3.
a.
b.
-
8/6/2019 Ac Air Vacume Pump
3/7
Page SKU 96677 Fo a qsos, as a 1-800-444-3353.
So a oos o of a of a o o ao
sos faa a oo o s sos o
oa . Pneumatic tools are dangerous in the hands of untrained
users.
Maintain neumatic tools. Check for misalignment or breakage of arts
and an other condition that ma affect the neumatic tools oeration. Ifdamaged, have it reaired before use. Many accidents are caused by poorly
maintained tools.
Use the pneumatic tool in accordance with these instructions and in the
manner intended for the particular type of tool, taking into account the working
conditions and the work to be erformed. Use of the pneumatic tool for
operations different from those intended could result in a hazardous situation.
S
Have our neumatic tool serviced b a ualied reair erson using onl
identical relacement arts. This will ensure that the safety of the tool ismaintained.
SpeciFic SAFety ruleS
Maintain labels and namelates on the tool. These carr imortant safet
information. If unreadable or missing, contact Harbor Freight Tools for a
relacement.
Avoid unintentional starting. Preare to begin work before turning on the tool
Do not leave the tool unattended when it is plugged into a pneumatic outlet,
unlug it before leaving.
This roduct is not a to. Kee it out of reach of children.
Peole with acemakers should consult their hsician(s) before use.
Electromagnetic elds in close roimit to heart acemaker could cause
acemaker interference or acemaker failure. Caution is necessar when near
coil, sark lug cables, or distributor of running engine. Engine should be off
during vacuum evacuation.
WARNING: The brass comonents of this roduct contain lead, a chemical
known to the State of California to cause birth defects (or other reproductiveharm). (California Health & Safet code 25249.5, et seq.)
never s s o o fas o a. i s a o o
so, af o o, a oss a sos a sk.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all ossible conditions and situations that ma occur. It must be
c.
d.
e.
4.
a.
1.
2.
3.
4.
5.
6.
7.
8.
-
8/6/2019 Ac Air Vacume Pump
4/7
Page SKU 96677 Fo a qsos, as a 1-800-444-3353.
understood by the operator that common sense and caution are factors which
cannot be built into this roduct, but must be sulied b the oerator.
SAve theSe inStructiOnS.
SpeciFicAtiOnS
Air Pressure Range 75-180 PSI
Recommended Air Pressure 75 PSI
Air Consumption 4.2 CFM @ 90 PSI
Vacuum Capacity 28.3 of Mercur Sea Level @ 90 Psi
Run Time Recommended 10 Minutes
Air Inlet 14-18 NPT
Vacuum Ports R-134A & R-1222
unpAcKing
When unacking, check to make sure that the item is intact and undamaged. If an
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as ossible.
OperAting inStructiOnS
ra entire impOrtAnt SAFety inFOrmAtiOn so a
b of s aa a x sbas bfo s o s of s o.
ga oa sos
nOte: While not reuired for oeration, it is advisable to mount a uick release air
tting to the Air Fitting. This will make it easier to uickl attach and detach the
air sul hose from this tool.
wa. It is unlawful and haardous to discharge refrigerants into the atmoshere.
Before beginning work with this tool, safely capture refrigerants using an
aroved refrigerant recover sstem and disose of them roerl. Contact theEPA for imortant certication regulations and other regulations that al (see
front cover).
Turn vehicle and AC sstem OFF.
Attach sho AC Refrigerant Recover Sstem. Drain refrigerant. After reaching
26 to 28 inhg. vacuum, sto and disconnect the Sho Recover S stem. Attach
1.
2.
-
8/6/2019 Ac Air Vacume Pump
5/7
Page 5SKU 96677 Fo a qsos, as a 1-800-444-3353.
this Air Vacuum Pump and run for 10 minutes to further raise the vacuum level in
the AC sstem.
Attach an air pressure hose (not included) to the Air Fitting either by threading it
directl on, or b using a uick release tting.
As aroriate, attach the R-134a or R1222 manifold tting to the AC drain ortof the vehicle. This is a uick release tting. The drain ort is generall the lower
of the two R-134a or R1222 manifold orts and will be located downstream from
the comressor in the vehicle. Refer to the vehicles owners manual for vehicle-
secic information. Tightl ca the unused ort.
Turn on the Air Vacuum Pum b activating the air comressor (not included).
Recommended running PSI is 75.
The vacuum will build for aroimatel 2 minutes, before reaching full ower.
Allow the pump to draw vacuum on the system for approximately 10 minutes to
thoroughl remove all moisture and an gas from the sstem.The gauge (not included) should show negative pressure and maintain that
reading for 10 minutes. If it rises back towards 0, there ma be a leak in the
sstem.
Turn off the air sul before disconnecting the hose from the vacuum tting.
Store the tool indoors out of childrens reach.
mAintenAnce And Servicing
u oo fo a o bfo fo aso, aa, o a os.
daa q a fa, as sos soa
j. do o s aa q. if aboa os o
bao os, a ob o bfo f
s.
ca, aa, a bao
BeFOre eAch uSe, insect the general condition of the tool. Check for loose
screws, cracked or broken parts, and any other condition that may affect its safeoeration.
AFter uSe, clean eternal surfaces of the tool with clean, moist cloth.
3.
4.
5.
6.
7.
8.
9.
1.
2.
wArningwArning
-
8/6/2019 Ac Air Vacume Pump
6/7
Page 6SKU 96677 Fo a qsos, as a 1-800-444-3353.
pleASe reAd the FOllOwing cAreFully
THE MANUFACTURER ANDOR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT
HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER ANDORDISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER
ASSUMES ALL RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
pArtS liSt & ASSemBly diAgrAm
pa dso Q
1 Cover 1
2 Housing 1 Cushion
Aluminum Block 1
5 Tube M10 1
6 Seal Ca R12 1
7 Vac Fitting R12R134a 1
8 Seal Ca R134a 1
9 Air Fitting 1
10 O-ring 1
11 Washer 10 1
ropos Sa nb h:
no: If roduct has no serial number, record month and ear of urchase instead.
no: Some parts are listed and shown for illustration purposes only, and are not
available individuall as relacement arts.
-
8/6/2019 Ac Air Vacume Pump
7/7
Page 7SKU 96677 Fo a qsos, as a 1-800-444-3353.
limited 90 dAy wArrAnty
Harbor Freight Tools Co. makes ever effort to assure that its roducts meet high
quality and durability standards, and warrants to the original purchaser that this product
is free from defects in materials and workmanship for the period of 90 days from the date
of urchase. This warrant does not al to damage due directl or indirectl, to misuse,
abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,
imroer installation, normal wear and tear, or to lack of maintenance. We shall in no event
be liable for death, injuries to ersons or roert, or for incidental, contingent, secial
or conseuential damages arising from the use of our roduct. Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation
of eclusion ma not al to ou. THIS WARRANTy IS ExPRESSLy IN LIEU OF ALL
OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITy AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transortation charges reaid. Proof of urchase date and an elanation of the comlaintmust accoman the merchandise. If our insection veries the defect, we will either
repair or replace the product at our election or we may elect to refund the purchase price
if we cannot readil and uickl rovide ou with a relacement. We will return reaired
products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning
the roduct.
This warrant gives ou secic legal rights and ou ma also have other rights
which var from state to state.
3491 Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 (800) 444-3353