SISTEM KONTROL DCS (DISTRIBUTED CONTROL SYSTEM) MENGGUNAKAN ABB FREELANCE DI WILMAR GROUP PT. KID POWER PLANT 2X15 MW

Lukman Hakim

11255101035

Tanggal seminar :

Jurusan Teknik Elektro

Fakultas Sains dan Teknologi

Universitas Islam Negeri Sultan Syarif Kasim Riau

Jl.HR.Soebrantas No. 155 Pekanbaru.Riau

ABSTRAK

Distributed Control System (DCS) adalah sebuah sistem kontrol yang digunakan pada plant atau suatu proses yang salah satunya di PT. KID power plant 2x15 MW, dimana elemen kontrol seperti transmitter, inverter dan motoran-motoran lainnya tidak berada pada satu sentral sistem melainkan tersebar di seluruh sistem dengan komponen subsistem di bawah kendali satu atau lebih yang di kontrol oleh AC 800F oleh Abb Freelance untuk

Kata-kata Kunci : Rig ,Logging ,Gamma ray ,Open Hole ,case hole

PRINCIPLES AND TELEMETRY OF NATURAL GAMMA RAY TOOL (NGRT) OPEN HOLE SYSTEM

Fernando Yulius

11055102095

Seminar Date: December 30,2013

Department of Electrical Engineering

Faculty of Science and Technology

State Islamic University of Sultan Syarif Kasim Riau

Jl.HR.Soebrantas No. 155 Pekanbaru.Riau

ABSTRACT

Petroleum drilling is the process of taking oil from the bowels of the earth using a piece of equipment called RIG, in the present rig using the manual method, the purpose of this research paper is to Know Logging Instrumentation system, especially concerning Natural Gamma Ray Tool (NGRT) which is one a tool of logging on the system and the open hole case is a tool that serves hole.NGRT capture or receive gamma rays from the earth which is then processed and produces output in the form of graphs

Key words: Rig, Logging, Gamma ray, Open Hole, hole case .