ABS EH36

2
In EH36 steel plate, our mill have more ingot to provide super thick steel plate, our max per weight of plate is above 24.5mt now, max width is 4000mm.. EH36 steel grade is lower than FH36 in yield and tensile strength. It is a good material for shipbuilding in deck. EH36 Grade is in -40 impact test of 34J energy. All of thickness of EH36 material need normalize in delivery station. Henan Gang iron and steel co., Ltd has exported large thickness is 160mm in this grade to Malaysia shipyard. Henan Gang iron and steel co., Ltd supply EH36 steel material directly from our mill in the competitive price from sales department. Each plate has the Mill Certificate Test EN 10204 3.2 Version. About EH36 detail informationplease check technical date in following. The Chemical is max composition of product analysis: Grade C % Si % Mn % P % S % V % AL % Cr % EH36 0.18 0 0.1- 0.5 0.90- 1.6 0.0 35 0.0 35 0.05- 0.10 0.0 15 0.2 00 Cu % Mo % Nb % Ni % Ti % 0.35 0 0.080 0.02- 0.05 0.4 00 0.0 20 The mechanical properties at ambient temperature for quenched and tempered steel plate Grad Thickness( Min Tensile(M Elongation Min

Transcript of ABS EH36

Page 1: ABS EH36

In EH36 steel plate, our mill have more ingot to provide super thick steel plate, our max per weight of plate is above 24.5mt now, max width is 4000mm.. EH36 steel grade is lower than FH36 in yield and tensile strength. It is a good material for

shipbuilding in deck. EH36 Grade is in -40 impact test of 34J energy. All of thickness of EH36 material need normalize in delivery station.  Henan Gang iron and steel co., Ltd has exported large thickness is 160mm in this grade

to Malaysia shipyard. Henan Gang iron and steel co., Ltd supply EH36 steel material directly from our mill in the

competitive price from sales department. Each plate has the Mill Certificate Test EN 10204 3.2 Version. About EH36 detail information,please check technical date in following.   The Chemical is max composition of product analysis:

Grade C % Si % Mn % P % S % V %AL % Cr %

 EH36

0.180 0.1-0.5 0.90-1.60.03

50.03

5 0.05-0.100.01

50.20

0

Cu % Mo % Nb % Ni % Ti %      

0.350 0.080 0.02-0.050.40

00.02

0          The mechanical properties at ambient temperature for quenched and tempered steel plate

GradeThickness(mm)

Min Yield (Mpa)

Tensile(MPa) Elongation(%)Min Impact

Energy

EH36

8mm-50mm Min 355Mpa

490-620Mpa 21%-40  34J

51mm-70mm

Min 355Mpa

490-620Mpa 21%-40  41J

71mm-100mm

Min 355Mpa

490-620Mpa 21%-40  50J

The min impact energy is longitudinal energy