Above Ground Valve & Control Vault › ... › 430-Series-Datasheet-2013.10.pdfAbove Ground Valve &...
2
Above Ground Valve & Control Vault The 430 valve and control vault offers another option for submersible pumping systems. Instead of underground valves and a control panel that is out in the open, the 430 encloses all of these com- ponents in an above ground structure. The 430 vault can be mounted over exist- ing or new concrete wet wells. They can also be supplied with a fiberglass wet well. The fiberglass wet well option al- lows installation of the discharge elbows, rails and other hardware prior to ship- ping. After the vault is installed on site, the pump discharge piping is connected to vault piping system. Discharge from the vault exits via a single pipe. Pump and control options are the same as those offered on our 421 packages. Standard Features: 3” to 8” submersible non-clogs & choppers Fiberglass, gull wing design allows easy ac- cess & eliminates confined space require- ments Insulated or standard lids Optional space heater Corrosion resistant galvanized skids Ductile iron piping Valves (check / plug / air release) & gauges Fiberglass or concrete wet wells Control panel with touch screen display Optional iRover remote control via your iPad Float, transducer & ultrasonic level options Complete Package UL QCZJ listed Hydronix 430 Series
Transcript of Above Ground Valve & Control Vault › ... › 430-Series-Datasheet-2013.10.pdfAbove Ground Valve &...
Above Ground Valve & Control Vault
The 430 valve and control vault offers another option for submersible pumping systems. Instead of underground valves and a control panel that is out in the open, the 430 encloses all of these com-ponents in an above ground structure.
The 430 vault can be mounted over exist-ing or new concrete wet wells. They can also be supplied with a fiberglass wet well. The fiberglass wet well option al-lows installation of the discharge elbows, rails and other hardware prior to ship-ping. After the vault is installed on site, the pump discharge piping is connected to vault piping system. Discharge from the vault exits via a single pipe.
Pump and control options are the same
as those offered on our 421 packages.
Standard Features:
3” to 8” submersible non-clogs & choppers
Fiberglass, gull wing design allows easy ac-cess & eliminates confined space require-ments
Insulated or standard lids
Optional space heater
Corrosion resistant galvanized skids
Ductile iron piping
Valves (check / plug / air release) & gauges
Fiberglass or concrete wet wells
Control panel with touch screen display
Optional iRover remote control via your iPad
Float, transducer & ultrasonic level options
Complete Package UL QCZJ listed
Hydronix 430 Series
A Division of PumpTech Inc. 503-659-6320 [email protected]
PumpTech Inc. TOLL FREE: 888-644-6686 www.pumptechnw.com
ABS
Vortex
1750 rpm
Non-Clog
ABS
Family Curves
Hydromatic Vortex
Various RPM’s Various RPM’s
Hydromatic Hydromatic
Hydromatic
1750 rpm 1150 rpm
870 rpm
Flow in GPM
He
ad
in F
ee
t
Flow in GPM
He
ad
in F
ee
t
Flow in GPM
He
ad
in F
ee
t
Flow in GPM
He
ad
in F
ee
t
9 / 2013
