ABOUT THE DEPARTMENT - Best Engineering College in · PDF fileV.M.Manivasagam “Design...
Transcript of ABOUT THE DEPARTMENT - Best Engineering College in · PDF fileV.M.Manivasagam “Design...
1
ABOUT THE DEPARTMENT
The Department of Mechanical Engineering possesses good infrastructural facilities,
12-equipped laboratories, 23 highly qualified and dedicated teaching faculties, 10 experienced
Lab technicians and the atmosphere conducive for research activities. Out of 22 teaching
faculties 4 of them have completed their PhD and 11 faculties are pursuing their Ph.D.
Mechanical Engineering includes design, development, manufacture, management, and control
of engineering systems, subsystems, and their components. Typically, manufacturing, power,
aerospace, automotive, materials, and processing industries employ Mechanical Engineers. As a
result of the recent rapid expansion of technology, Mechanical Engineers also have become
increasingly involved in computer aided design and visualization; robotics; bioengineering;
environmental engineering; solar, wind, ocean energy sources and space exploration.
VISION
Through the Excellence of its People, the Department of Mechanical Engineering will be
recognized as a leader in providing well qualified engineers who are innovative, immediate
contributors to their profession and successful in advanced studies in their respective fields.
MISSION
The Mechanical Engineering programme makes available a high quality, relevant Engineering
education to the students with a set of skills, knowledge and attitudes that will permit its
graduates to succeed and thrive as Engineers and Leaders.
QUALITY POLICY
Our Policy is to develop highly skilled human resources with the ability to adopt to an
Intellectually and Technologically changing environment through Innovative Teaching and
Learning Methods.
2
FACULTY LIST
S.No NAME DESIGNATION S.No NAME DESIGNATIO
N
1 Dr. V.S. Sree Balaji Professor & Head
1 S.Jayakumar Lab.Technician
2 Dr. K. Kalaiselvan Professor
2 R.Meenachisundaram Lab.Technician
3 Dr.S. Kalidass Professor
3 A.Saravanakumar Lab.Technician
4 V.M. Manivasagam Associate Professor
4 S.Kuppuraj Lab.Technician
5 Dr. R. Ravikumar Associate Professor
5 Y.Selvanesan Lab.Technician
6 A. Selvaraj Associate Professor
6 A.Prabhu Lab.Technician
7 D.K. Saravanan Associate Professor
7 S.Thangavelu Lab.Technician
8 S. Venkatesan Associate Professor
8 P.shanmugaprabhu Lab.Technician
9 T. Sivakumar Associate Professor
9 Mr. A. Murugesan Lab.Technician
10 G. Michaelraj Associate Professor
10 Mr. S. Gurusamy Lab.Technician
11 V. Sivaraman Assistant Professor
11 Mrs.Meena Office P.A.
12 I.M. Karthikeyan Assistant Professor
13 M. Nallusamy Assistant Professor
14 A. Jaganathan Assistant Professor
15 M. Thirumalaimuthukumaran Assistant Professor
16 P. Gopikrishnaan Assistant Professor
17 N. Manikandan Assistant Professor
18 K. Gopinath Assistant Professor
19 P. Vijayakumar Assistant Professor
20 N. Senthilprabhu Assistant Professor
21 V.P. Pradeep Assistant Professor
22 R. Ranjith Assistant Professor
TEACHING STAFF NON TEACHING STAFF
MECHANICAL ENGINEERING
Faculty Team with 2011-2015 Batch Students
3
PROGRAMS ORGANISED
Anna University Sponsored FDTP on Automobile Engineering
The Department of Mechanical
Engineering has organized a seven days Faculty
Development Training Programme during winter
vacation 2014 on “Automobile Engineering” from
December 15, 2014 to December 21, 2014.
The programme was inaugurated by
Dr .P.V.Mohanram, Principal, PSG Institute of
Technology and Applied Research, Coimbatore on
December 15, 2014. Eminent personalities like Dr.S.Krishnakumar, Senior Technical officer,
DRDO, Chennai, Dr.Muthukumaran, Department of Bio-Technology, Government College of
Technology, Coimbatore, Dr.M.Subramanian, Associate Professor, Department of Automobile
Engineering, PSG College of Technology, Prof.S.Sivakumar, Associate Professor, Department
of Automobile Engineering, Kumaraguru College of Technology delivered lectures during the
Programme.
National Conference on RADAIS2k15
The Department of Mechanical
Engineering has organized a National
Conference on Recent Advancements in
Design, Automation and Intelligent Systems
(RADAIS-2k15) on 27.03.15. The conference
was inaugurated by the honorable chief guests
Dr. Nithyanandan Devaraaj, Foundry Products
Divison, Larson & Toubro, Coimbatore and Mr. D. Rajaji, Director, COINDIA, Coimbatore at
9.30 am and delivered the inaugural address on the function. Dr. V. S. Sreebalaji, Professor and
Head, Department of Mechanical Engineering, welcomed the gathering. Dr. K. Kalaiselvan,
Professor, Department of Mechanical Engineering has presented the conference theme. The
beloved secretary Dr. Thavamani D. Palaniswami, Dr. NGP Institute of Technology has
4
delivered the presidential address. The felicitation address was given by Dr.C.Kailasam, Director
of Maths Dept., and Dr. NGP Institute of Technology. Nearly 130 delegates from various
institutions of different regions were participated in the conference and presented their papers.
The vote of thanks was given by Dr. K. Ravikumar, Associate Professor and Department of
Mechanical Engineering.
YRC-Blood Donation Camp
Blood donation camp was organized by Youth Red
cross of Dr.NGP Institute of Technology in association
with Lions club of Coimbatore Elite and Coimbatore
Medical College Hospital on 10.02.2015. Dr.NGPIT
faculty members and students were actively participated
and donated the
blood in this event.
Dr.A.Balakrishnan, Professor, Jansons Institute of
Technology invited to present a guest lecture on Campus
communication and Group Discussion on 21/02/2015.
RESEARCH PUBLICATIONS
Papers published in International Journals
S.Venkatesan and N.Saravanakumar : Tribological Processes and its technological
advances for MEMS Applications -A Review, International Journal of Applied Engineering
Research, special issue, Vol. 10, No.13 , pp.11232-11247 ,2015.
S.Venkatesan and N.Saravanakumar : A Review on Effects of Mechanical Properties of
Thin Film Material, Deposition Process and Characterization Technique for MEMS
Applications, International Journal of Applied Engineering Research, Vol. 10, No.6 ,
pp.13999-14014 ,2015.
S.Venkatesan and N.Saravanakumar: Influence of Atomic layer deposited coatings for
MEMS Applications – A Review, International Journal of Nano and Biomaterials,(Special
5
issue on Smart materials and Intelligent Devices) Inderscience Publishers , Vol.05 No.4
PP:243 - 262, 2014.
Papers published in International Conference
S.Venkatesan, Tribological Processes and its technological Advances for MEMS
Applications – A Review in International Conference on Advances in Bio Technology,
Civil & Mechanical Sciences,ICABCMS – 15 held on 13th
& 14th
March,2015 in Selvam
College of Technology, Namakkal.
V.Ganeshan, Dr.K.Ravikumar, Dr.V.S.SreeBalaji has presented the paper entitled
“Optimization on WEDM in tungsten carbide/ graphite with aluminium hybrid composites
using RSM”, in the “International Conference on contemporary innovations in the sphere
of Mechanical Engineering and Management” organized by Department of Mechanical
Engineering ,SSCET Palani, Tamilnadu, india on 30th and 31th March 2015.
Papers published in National Conference
S.Venkatesan, Analysis of Titanium Coating on Aluminium Substrate for MEMS
Applications in National Conference on Recent Advancements in Design, Automation and
Intelligent Systems, RADIAS – 2K15 held on 27th
March ,2015 in Dr.NGPIT, Coimbatore
K.Kalaiselvan, M.Saravanan,, “Prediction models for drilling of GFRP composite
laminates Using fuzzy logic”, Proceedings of National conference on Recent advancements
in Design, Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP Institute of
Technology, Coimbatore, pp.36, 27th March 2015.
Pradeep Kumar R, Aravinth Kumar R, Varun Gowtham A P, Praveen Kumar P,
K.Kalaiselvan, “Characterization of Surface Composites by Friction Stir Processing
Method”, Proceedings of National conference on Recent advancements in Design,
Automation and Intelligent Systems (RADAIS2k15), Dr.NGP Institute of Technology,
Coimbatore, pp.11, 27th March 2015.
V.S.Sree balaji, K.Ravikumar, “A Review On Wire Electric Discharge Machining
(WEDM) Of Aluminum Composite Materials”, Proceedings of National conference on
Recent advancements in Design, Automation and Intelligent Systems (RADAIS-2k15),
Dr.NGP Institute of Technology, Coimbatore, pp. 10, 27th March 2015
6
K.Gobinath, “Automatic Sheet Cutting Machine”, Proceedings of National conference on
Recent advancements in Design, Automation and Intelligent Systems (RADAIS-2k15),
Dr.NGP Institute of Technology, Coimbatore, pp.13, 27th March 2015
T.Sivakumar, “Automatic Reverse Locking System In Automobiles”, Proceedings of
National conference on Recent advancements in Design, Automation and Intelligent
Systems (RADAIS-2k15), Dr.NGP Institute of Technology, Coimbatore,pp.14, 27th
March
2015.
K.Ravi Kumar. “Design And Fabrication Of Effective Solar Heating Using Mirror
Reflector”, Proceedings of National conference on Recent advancements in Design,
Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP Institute of Technology,
Coimbatore,14, 27th
March 2015.
I.M.Karthikeyan, “Performance Enhancement Of The Solar Plate Collector Using Copper
Tubes”, Proceedings of National conference on Recent advancements in Design,
Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP Institute of Technology,
Coimbatore,21. 27th
March 2015
T.Siva kumar “A Review On Investigation On Fatigue Properties Of En 24 Steel And Laser
Boriding”, Proceedings of National conference on Recent advancements in Design,
Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP Institute of Technology,
Coimbatore, pp.22, 27th
March 2015.
S. Kalidass, “Prediction Of Cutting Force In End Milling Process of AISI 304 Steel With
Solid Carbide Tools Using Response Surface Methodology”, Proceedings of National
conference on Recent advancements in Design, Automation and Intelligent Systems
(RADAIS-2k15), Dr.NGP Institute of Technology, Coimbatore,22, 27th
March 2015
V. Sivaraman , “Energy Audit In Mechanical Laboratories”, Proceedings of National
conference on Recent advancements in Design, Automation and Intelligent Systems
(RADAIS-2k15), Dr.NGP Institute of Technology, Coimbatore, pp.28, 27th
March 2015
V.M.Manivasagam “Design And Fabrication Of Aqua Silencer To Reduce Noise Level
And Emmision Rate”, Proceedings of National conference on Recent advancements in
Design, Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP Institute of
Technology, Coimbatore, pp.28, 27th
March 2015
G, Senthil Prabhu, “Design And Fabrication of Electromagnetic Engine”, Proceedings of
7
National conference on Recent advancements in Design, Automation and Intelligent
Systems (RADAIS-2k15), Dr.NGP Institute of Technology, Coimbatore, pp.30, 27th
March
2015
R.Vijayakumar, “Design And Fabrication Of Vertical Axis Butterfly Type Blade Wind
Turbine”, Proceedings of National conference on Recent advancements in Design,
Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP Institute of Technology,
Coimbatore, pp.36, 27th
March 2015
T.Sivakumar, “An Analysis Of Mechanical Properties of Borided Induction Modified En
24 Steel”, Proceedings of National conference on Recent advancements in Design,
Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP Institute of Technology,
Coimbatore, pp.39., 27th
March 2015
K.Ravikumar, “A Review On Investigation of Mechanical And Wear Characteristics Of
Hybrid Composite Materials”, Proceedings of National conference on Recent
advancements in Design, Automation and Intelligent Systems (RADAIS-2k15), Dr.NGP
Institute of Technology, Coimbatore, pp.40, 27th
March 2015
A.Selvaraj, “Effect Of Tool Structure On Mechanical Properties And Microstructure Of
Friction Stir Welded Aluminium Alloy 5005 H32”, Proceedings of National conference on
Recent advancements in Design, Automation and Intelligent Systems (RADAIS-2k15),
Dr.NGP Institute of Technology, Coimbatore, pp.44, 27th
March 2015.
Kiran.K, Ravi Kumar.K, A study on Frictional and Wear behaviour of Aluminium
Composites, National Conference on DISENO, Adhiyamaan College of Engineering,
Hosur, 2015.
Awards received by faculty
Mr.V.M.Manivasagam. Associate Professor/Mech received the “ISTE Life Time
Achievement Award” by ISTE Tamilnadu-Pondicherry State Section at PSG College of
Technology, Coimbatore on 23.01.2015.
8
Lectures delivered to the other institutes, conference chair, etc.
Dr.V.S.Sree Balaji delivered a lecture on Process and Product Innovation for the
Institution of Engineers Chapter at PSG College of Technology, Coimbatore on January
09, 2015.
Dr.V.S.Sree Balaji delivered a lecture on Creativity and Innovation for Faculty
Development Programme on Entrepreneurship at PSG College of Technology,
Coimbatore on May 28, 2015.
Mr.Michael Raj delivered a lecture on Advanced Two and Three Wheeler Braking
System at JCT College of Engg. and Tech. Coimbatore on 02-2015.
Dr.K.Ravi Kumar delivered a lecture on “Composite Fabrication Techniques” at FDP
MPNMJ Engineering College.
Dr.K.Ravi Kumar delivered a lecture on Engg Materials and Metallurgy at Two days
FDP at Adithya Institute of Technology, Coimbatore.
VALUE ADDED COURSES
The value added program of AUTOCADD was conducted on January 20, 2015 and
February 07, 2015 from CADD CENTRE and COINDIA respectively.
STUDENT SUPPORT AND PROGRESSION
PARTICIPATION IN THE ACADEMIC EVENTS
SL.
No.
Name of the
Students
Nature of the
Event
Organiser Date Prize Won
1. T.Parthasarathy-
Final year Mech
Dr.V.S.Sreebalaji.
HoD/Mech
Teachers Day
Celebration
Confederation of
Indian
Industry,CBE.
September
2014
-
2. M.Arvind,
K.Arunrajakumar,
G.Jagadeeswaran,
B.Nishanth, V.Prasath
N.Jayasakthivel
National Level
Technical
Symposium
(MEEMICC'14)
Coimbatore
Institute of
Engineering and
Technology
Coimbatore
August
08, 2014
-
3. P.Karthikeyan
V.Karthikeyan
Fabrication of
Mini Bike-
Karpagam
College of
September
05, 2014
-
9
Mr.Moohan bharathi
Mr.Hariprasad
E.Aravind kumar
Mr.Mohemmed Ali
Design Contest Engineering
4. R.Aravind kumar
C.Maheskumar
M.Karthic
J.Madankumar
Fabrication of
Mini Bike -SAE
Tier I
Jansons Institute
of Technology
August
22, 2014
Selected for
Tier-II
5. Gowshigan- II A English Poem –
TECHFEST
2015
Dr.NGP Institute
of Technology
January
23, 2014
First
6. Jack Ashwin. G- III A ADZAP Dr.NGP Institute
of Technology
January
23, 2014
First
7. Sudhakar. R- II B Tamil Speech Dr.NGP Institute
of Technology
January
23, 2014
Second
8. Kathirvel. S- II A Tamil Poem
Writing
Dr.NGP Institute
of Technology
January
23, 2014
Second
9. Hari. N- III A Instrumental Dr.NGP Institute
of Technology
January
23, 2014
Second
10. Jack Ashwin. G- III A Mono acting Dr.NGP Institute
of Technology
January
23, 2014
Second
11. S.B. Adhithya &
team- III A
Debate Dr.NGP Institute
of Technology
January
23, 2014
Third
12. S.B. Adhithya- III A Extempore Dr.NGP Institute
of Technology
January
23, 2014
Third
13. Jaison jose Thomas-
III A
English Speech Dr.NGP Institute
of Technology
January
23, 2014
Third
14. Vignesh devan- IV Creating Thevan Dr.NGP Institute
of Technology
January
23, 2014
Third
15. Mr.S.R.Sudhahar- II Tamil Pesu-
Tamilaai Pesu
Dr.NGPIT
(Podhigai TV)
Feb 27,
2015
Third
16. Mr.Guruprasath Tamil Pesu-
Tamilaai Pesu
Dr.NGPIT
(Podhigai TV)
Feb 27,
2015
Second
17. Mr.Justin James Entrepreneurship
development
PSG Tech Feb 27,
2015
Third
18. Mr.Manoj Kumar Entrepreneurship
development
PSG Tech Feb 27,
2015
Third
19. Mr.Vignesh Kumar.B Entrepreneurship
development
PSG Tech Feb 27,
2015
Third
10
PAPER PRESENTED IN CONFERENCE
S.No Name of the
Student Title of the paper Organizer
Nature of
the Event
Page
No. Date
1.
M.Valliappan,
S.Ranjith Kumar ,
K.Vasanth
Design of automatic air
filling system for heavy
vehicles
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
10
March
27,
2014
2.
Vignesh P G R ,
Jayasakthivel N,
YuvarajaR
Investigation of thermal
behaviour of cnc lathe
under
Machining conditions
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
14 March
27
3.
Dheepak K,
Ragul Raj V,
Ashok Kumar S
Belt driven bicycle with
pedal adjustment for high
torque
Batch
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
15 March
27
4.
Jagadeeswaran.G,
Nishanth B,
Partha Sarathy T
Tribological behavior of
nano- coatings for mems
application
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
27 March
27
5. Rubon romario
Characterization of hybrid
silicon carbide and boron
carbide
Reinforced aluminum alloy
composites
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
29 March
27
6.
Ligin.R
Mani Kandan.N
Danasekaran.E
Raghul
gowtham.P.J
Pneumatic tricycle
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
31 March
27
7.
A.M.Gowshihan,
Justin James,
Manoj kumar.K.
Safety in automotives
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
36 March
27
8. S.Padmaraj
A review on coating and
charecterization technique
for dental Application
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
39 March
27
9. Mr.V.Ganeshan,
A review on wire electric
discharge machining
(wedm) of Aluminum
composite materials
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
pp.
10
March
27
10.
Pradeep Kumar,
Aravinth Kumar,
Varun Gowtham
A, Praveen
Kumar,
Characterization of surface
composites by Friction stir
processing method
Dr.NGP
Institute of
Technology
National
Conference on RADAIS2k15
13 March
27
11. Abdul Malik.M,
Deepadarshan,
Rahamathullah,
Automatic sheet cutting
machine
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
13 March
27
12. Abdul Rahman
.M. F, Aravindh
.B.
Automatic reverse locking
system in automobiles
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
14 March
27
11
13.
R.G.Jaiprashanth
N.Gokul raj
V.Hari krishnan
Vignesh kumar
Design and fabrication of
effective solar heating
using mirror Reflector
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
14 March
27
14. Prasath, Sivanesh ,
Sugamathi,
Performance enhancement
of the solar plate collector
using Copper tubes
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
21 March
27
15. Prabhath
Chandrasekhar
A review on investigation
on fatigue properties of en
24 steel And laser boriding
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
22 March
27
16. K.vivek
Prediction of cutting force
in end milling process of
aisi 304 steel With solid
carbide tools using
response surface
methodology
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
22 March
27
17. Dhananjai.R.K,
Gautham.R,
Energy audit in mechanical
laboratories
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
28 March
27
18.
Aravindh.M,
Arun
RajaKumar.K ,
Prabakar.S
Design and fabrication of
aqua silencer to reduce
noise level And emmision
rate
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
28 March
27
19.
Rajesh R,
Ravikumar
Deepak surya s,
Harihara sudhan k,
Designandfabricationof
electromagnetic engine
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
30 March
27
20. Bala Krishnan.M
Gunasekaran.N
Kanagaraj.K
Design and fabrication of
vertical axis butterfly type
blade Wind turbine
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
36 March
27
21. M.Saravanan
Prediction models for
drilling of gfrp composite
laminates Using fuzzy
logic
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
37 March
27
22. S.Rajiv Jaipaul
An analysis of mechanical
properties of borided
induction Modified en 24
steel
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
39 March
27
23. K.Kiran
A review on investigation
of mechanical and wear
Characteristics of hybrid
composite materials
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
40 March
27
24. R.Kalidasan
Effect of tool structure on
mechanical properties and
microstructure of friction
stir welded aluminium
alloy 5005 h32
Dr.NGP
Institute of
Technology
National
Conference on
RADAIS2k15
44 March
27
12
Dr.NGPIT team “KART RIDE LINERS”,
comprising of 20 Students from Mechanical
Engineering Department along with P.Gopi
Krishnan, AP/Mech and Mr.R.Vijaya Kumar,
AP/Mech, has participated in International Gokart
Championship held in Lovely Professional
University, Punjab from 27.03.2015 to
30.03.2015. The team has participated in Static & Dynamic events with their In-house-
fabricated Gokart Vehicle. Our College has secured 16th
place out of 69 teams
participated all over India and 6th
place in Tamilnadu.
INTERNSHIPS AND FACTORY VISITS
S.Venkatesan, Associate Professor in Mechanical Engineering, participated Winter
Internship Program on Nanomaterials organized by the Department of Nanotechnology,
Sri Ramakrishna Engineering College, Coimbatore from December 15th – 19th, 2014.
Second year B.E. Mechanical Engineering - A students has been visited the EKKI
Pumps Pvt. Ltd. at Ganapathy, Coimbatore on 20th
and 24th
Feb. 2015
Third year B.E. Mechanical Engineering students has been visited the CPC Private Ltd at
Coimbatore on 30th
sep 2014.
STUDENT ACHIEVEMENT
Mr.R.Vigneshwar - III Year Mechanical „B‟ won the first prize
and received a cash prize of Rs.7000/- out of 380 participants in
the CAD contest held at Dr.NGP IT , CAD LAB on 13/4/15
which is evaluated by senior Technical Engineer - LMW.
23 Projects were completed by IV Year Mechanical
Engineering Students in their Final Project work.
45 Mini projects were completed by III Year Mechanical
Engineering Students in their Design and Fabrication Project.
13
TRAINING PROGRAMME ATTENDED BY THE FACULTY:
Sl.
No
Name of the
faculty Name of the FDP Venue Date
1. Mr.T. Sivakumar
One day workshop on “
Effective research &
Technical Journal writing”
Kongu
Engineering
College, Erode 6
th Sep. 2014
2. Mr.N.Senthil
Prabhu
One day workshop on “
Effective research &
Technical Journal writing”
Kongu
Engineering
College, Erode 6
th Sep. 2014
3.
Dr.V.S. Sree
Balaji
Conference on MAKE IN
INDIA: Opportunities
through Innovations
PSG College of
technology
25th
& 26th
Feb. 2015
4.
N.Senthil Prabhu
Conference on MAKE IN
INDIA: Opportunities
through Innovations
PSG College of
technology
25th
& 26th
Feb. 2015
5. Dr.V.S. Sree
Balaji FDP on Entrepreneurship
PSG College of
technology
18th
to 29th
May 2015
14
Published by:
Department of Mechanical Engineering
Dr.N.G.P.Institute of Technology
Kalapatti Road, Coimbatore-641048.
Phone: (0422) 2369105
Website: www.drngpit.ac.in
Chief Editors:
1. Dr. K.PORKUMARAN M.E., Ph.D., M.I.S.T.E.,
Principal,
Dr. N.G.P. Institute of Technology
E-mail id: [email protected]
2. Dr. V.S.SREEBALAJI M.E., Ph.D., F.I.E.,M.I.S.T.E.,
Professor & Head of the department
Department of Mechanical Engineering,
Dr. N.G.P. Institute of Technology
E-mail id: [email protected]
Editor:
1. Dr. K.KALAISELVAN M.E., Ph.D., IWS,M.I.S.T.E.,
Professor of Mechanical Engineering
Dr. N.G.P. Institute of Technology
E-mail id: [email protected]
Student Coordinator
1. Navin.R.L – Third Year Mech